+ All Categories
Home > Documents > Curriculum of Massimo Vitellididattica.cressi.unicampania.it/cv/057322-en.pdf · 2020-05-04 ·...

Curriculum of Massimo Vitellididattica.cressi.unicampania.it/cv/057322-en.pdf · 2020-05-04 ·...

Date post: 26-May-2020
Category:
Upload: others
View: 19 times
Download: 0 times
Share this document with a friend
23
Curriculum of Massimo Vitelli Massimo Vitelli was born in Caserta (Italy) in 1967. He received the Laurea degree with honours in Electrical Engineering from the University of Naples Federico II, Italy, in 1992. In 1994 he joined the Department of Information Engineering of the Second University of Naples as a Researcher. In 2001 he was appointed Associate Professor and in 2006 Full Professor. In 2012 he joined the Department of Industrial and Information Engineering of the Second University of Naples. He teaches Electrotechnics and Power Electronics. He has been engaged, in cooperation with researchers of the University of Salerno and University of Naples Federico II, in a number of scientific national projects financed by the Italian Ministry of University and of Scientific and Technological Research (MURST) and by the National Science Foundation (CNR). His main research interests concern Maximum Power Point Tracking techniques in photovoltaic applications; power electronics circuits for renewable energy sources; methods for analysis and design of switching converters, calculation of steady-state solutions; tolerance analysis/design by means of interval arithmetic, affine arithmetic, and genetic algorithms; optimization of switching converters; tolerance analysis/design in electromagnetic field problems, electromagnetic compatibility, electromagnetic characterization of new insulating and semi-conducting materials. He has served as a reviewer for the following international journals: IEEE Transactions On Electromagnetic Compatibility, IEEE Transactions on Circuits and Systems 1: Fundamental Theory and Applications, IEEE Transactions on Power Electronics, IEEE Transactions on Industrial Electronics and for the following international IEEE Conferences: ISCAS, ISIE, ICIT, EPE-PEMC. He has been Referee for CIVR (Committee for Evaluation of Research for the Italian Ministry of Education, University and Research) of research products submitted for the evaluation of Scientific Research in Italy during the three- year period 2001/2003. He has also been engaged in a number of research contracts with Industries (C.R.I.S. Ansaldo, ELCON s.r.l., MagneTek s.p.a., Power One, Astrid Energy Enterprises S.p.A., Matrix s.r.l, NATIONAL SEMICONDUCTOR CORPORATION, Elettronica Santerno S.p.A, Bitron S.p.A). Since 2003 Prof. Vitelli has been an Associate Editor of the IEEE Transactions on Power Electronics. He has been Guest Editor for IEEE Transactions on Industrial Electronics -Special Section on “Industrial Electronics for Photovoltaic Systems” (2008). He is a component of the Technical Committee on Renewable Energy Systems (RE) of the Industrial Electronics Society. He is a component of the TECHNICAL COMMITTEE ON Power and Energy Circuits and Systems OF THE IEEE CIRCUITS AND SYSTEMS SOCIETY. He has been Guest Editor for IEEE Transactions on Industrial
Transcript

Curriculum of Massimo Vitelli

Massimo Vitelli was born in Caserta (Italy) in 1967. He received the Laurea degree with

honours in Electrical Engineering from the University of Naples Federico II, Italy, in 1992. In

1994 he joined the Department of Information Engineering of the Second University of Naples

as a Researcher. In 2001 he was appointed Associate Professor and in 2006 Full Professor. In

2012 he joined the Department of Industrial and Information Engineering of the Second

University of Naples. He teaches Electrotechnics and Power Electronics. He has been engaged,

in cooperation with researchers of the University of Salerno and University of Naples Federico

II, in a number of scientific national projects financed by the Italian Ministry of University and

of Scientific and Technological Research (MURST) and by the National Science Foundation

(CNR). His main research interests concern Maximum Power Point Tracking techniques in

photovoltaic applications; power electronics circuits for renewable energy sources; methods for

analysis and design of switching converters, calculation of steady-state solutions; tolerance

analysis/design by means of interval arithmetic, affine arithmetic, and genetic algorithms;

optimization of switching converters; tolerance analysis/design in electromagnetic field

problems, electromagnetic compatibility, electromagnetic characterization of new insulating and

semi-conducting materials. He has served as a reviewer for the following international journals:

IEEE Transactions On Electromagnetic Compatibility, IEEE Transactions on Circuits and

Systems 1: Fundamental Theory and Applications, IEEE Transactions on Power Electronics,

IEEE Transactions on Industrial Electronics and for the following international IEEE

Conferences: ISCAS, ISIE, ICIT, EPE-PEMC. He has been Referee for CIVR (Committee for

Evaluation of Research for the Italian Ministry of Education, University and Research) of

research products submitted for the evaluation of Scientific Research in Italy during the three-

year period 2001/2003. He has also been engaged in a number of research contracts with

Industries (C.R.I.S. Ansaldo, ELCON s.r.l., MagneTek s.p.a., Power One, Astrid Energy

Enterprises S.p.A., Matrix s.r.l, NATIONAL SEMICONDUCTOR CORPORATION,

Elettronica Santerno S.p.A, Bitron S.p.A). Since 2003 Prof. Vitelli has been an Associate

Editor of the IEEE Transactions on Power Electronics. He has been Guest Editor for IEEE

Transactions on Industrial Electronics -Special Section on “Industrial Electronics for

Photovoltaic Systems” (2008). He is a component of the Technical Committee on Renewable

Energy Systems (RE) of the Industrial Electronics Society. He is a component of the

TECHNICAL COMMITTEE ON Power and Energy Circuits and Systems OF THE IEEE CIRCUITS

AND SYSTEMS SOCIETY. He has been Guest Editor for IEEE Transactions on Industrial

Electronics -Special Section on “Efficient and reliable Photovoltaic Systems” (2008), and

Special Section on “Fuel cells power processing and control” (2009). He has been Visiting

Professor in 2010 at the Universidad Nacional de Colombia (Medellin, Colombia) and at the

Universidad del Valle (Cali, Colombia), in the framework of a research project entitled

“DISEÑO, ANÁLISIS Y EVALUACIÓN DE ESTRATEGIAS DE CONTROL PARA

OPTIMIZACIÓN DE SISTEMAS DE GENERACIÓN BASADOS EN PANELES

FOTOVOLTAICOS”. He is Reviewer of research project for Israel Science Foundation. He is

Reviewer of research project for Cyprus Research Promotion Foundation.

He is coauthor of National and International Patents and of about 200 papers on international

scientific journals and conference proceedings.

PUBBLICATIONS

INTERNATIONAL CONFERENCES P1) N.Femia, V.Tucci, M.Vitelli: "Generalized models for the simulation of step-wise

propagating gas discharges", Proc. of XXI Int. Conf. on Phenomena in Ionized Gases, Ruhr-University, Bochum (D), Sept. 1993, pp 411-412.

P2) N.Femia, M.Vitelli, G.Lupò, V.Tucci: "Electrical field dependence of charge carrier

dynamics in disordered materials", Proc. of Conf. on Electrical Insulation and Dielectric Phenomena, Pokono Manor (PA), Oct. 1993, pp.191-196.

P3) N.Femia, G.Lupò, V.Tucci, M.Vitelli: "Electric field calculation in HV cable terminations

employing heat-shrinkable composites with non linear characteristics", Proc. of 4th ICPDAM, Brisbane, July 1994, pp. 278-281.

P4) N.Femia, G.Spagnuolo, M.Vitelli:"An effective interval analysis-based method for the unified

steady-state analysis of PWM switching converters", Proc. of 4th Int. IEEE Workshop on Computers in Power Electronics, Trois-Rivieres Quebec, August 1994, pp. 115-120.

P5) G.Lupò, V.Tucci, M.Vitelli: "Stress control tubes for HV cable termination with linear and

non linear characteristics: theoretical and experimental approaches", Proc. of 9th ISH, Graz, Aug. 1995.

P6) G:Lupo', C.Petrarca, G.Spagnuolo, V.Tucci, M.Vitelli:"Design and experiments on vacuum

bushings for HV apparatuses", Proc of 9th ISH, Graz , Aug. 1995. P7) N.Femia, V.Tucci, M.Vitelli: "Simulation of electrical treeing in multilayer dielectrics", Proc.

of 5th ICSD, Leicester, July 1995, pp.209-213. P8) N.Femia, V.Tucci, M.Vitelli: " Computer simulation of charge transport in disordered

materials ", Proc. of Conf. on Electrical Insulation and Dielectric Phenomena, Virginia Beach, Virginia, USA, Oct. 95, pp.658-661.

P9) N. Femia, M. Vitelli :"Frequency domain analysis of dc-dc converters with internally controlled switching instants", Proc. of Int. Conf. IEEE CIEP'96, Cuernavaca, Oct. 1996, pp. 269-276.

P10) L.Egiziano, G. Lupò, C. Mazzetti, M. Pompili, V.Tucci, M. Vitelli: "A fractal analysis for

discharge growth in liquid dielectrics", Proc. of Conf. on Electrical Insulation and Dielectric Phenomena , Millbrae, California, USA, October 1996, pp. 323-326.

P11) L.Egiziano, G. Lupò, C.Petrarca, V.Tucci, M. Vitelli, :”Partial Discharge Diagnostics on a

HV Superconducting Model Cable”, Proc. of Conf. on Electrical Insulation and Dielectric Phenomena, Minneapolis, USA, October 1997, pp. 346-349.

P12) L.Egiziano, G. Lupò, C.Petrarca, V.Tucci, M. Vitelli, :”PD characterization of HV criogenic

cable terminations”, Fourth Volta Colloquium on Partial Discharge Measurements, Como, Italy, Nov. 1997, pp. 1-9.

P13) G. Lupò, C. Petrarca, V. Tucci, M. Vitelli: "Modelling of preliminary intra-cloud lightning

discharges", Proc of 24th Int Conference on Lightning Protection (ICLP), Birmingham (U.K.), 14-18 Sept. 1998, pp. 113-118.

P14) G. Lupò, C. Petrarca, V. Tucci, M. Vitelli: "Calculation of electromagnetic fields generated

by intra-cloud lightning discharges", Proc of 24th Int Conference on Lightning Protection (ICLP), Birmingham (U.K.), 14-18 Sept. 1998, pp. 293-298.

P15) L.Egiziano, C. Petrarca, V. Tucci, M. Vitelli, “Effects of Mechanical and Thermal Stresses on

carbon-black loaded stress grading materials”, Proc. of IEEE 6th ICSD, Vasteras, Sweden, July 1998, pp.553-556.

P16) L.Egiziano, G. Lupò, C.Petrarca, V.Tucci, M. Vitelli :“ Electroquasistatic field distribution in

MV cable terminations equipped with non linear stress control tubes”: 4th International Workshop on Electric and Magnetic Fields, Marseille (France), 12-15 May 1998, pp.117-122.

P17) L.Egiziano, G.Lupò, C.Petrarca, V.Tucci and M.Vitelli, “Partial discharges measurements

for acceptance testing of resin insulated voltage transformers”, IMEKO TC-4 10-th International Symposium on Development in Digital Measuring Instrumentation, Napoli, 17-18 Sept. 1998, pp. 551-556.

P18) G.Lupò, C.Petrarca, M.Vitelli, L.Angrisani, M.Daponte, “A digital technique based on the

wavelet transform for partial discharges analysis” , IMEKO TC-4 10-th International Symposium on Development in Digital Measuring Instrumentation, Napoli, 17-18 Sept. 1998, pp. 551-556.

P19) L.Egiziano, G. Lupò, C.Petrarca, V.Tucci, M. Vitelli :“ Investigation on performances of

insulation materials for inverter-fed traction motors”, Proc. of Conf. on Electrical Insulation and Dielectric Phenomena, Atlanta (USA), Oct. 1998, pp.564-567.

P20) L.Egiziano, G. Lupò, C.Petrarca, V.Tucci, M. Vitelli:” Numerical Evaluation of the Electrical

Field in Cable Terminations Equipped with Non Linear Grading materials”, Proc. of Conf. on Electrical Insulation and Dielectric Phenomena, Atlanta (USA), Oct. 1998, pp.585-588.

P21) L.Egiziano, G.Lupò, C.Petrarca, V.Tucci, M.Vitelli: “Fractal Analysis of EM Fields Generated by Tortuous Lightning Channels”, Proc. of 11th ISH, London (U.K.), Aug. 1999, Vol. 1, pp. 347-351.

P22) L.Egiziano, G.Lupò, C.Petrarca, V.Tucci, M.Vitelli: “A nonlinear model for cap and pin

insulators equipped with anti-corona coating”, Proc. of 11th ISH, London (U.K.), Aug. 1999, Vol. 4, pp. 9-13.

P23) L.Egiziano, G.Lupò, C.Petrarca, V.Tucci, M.Vitelli: “ Steep-Fronted Overvoltages in

Inverter-Fed Induction Motors: Numerical Identification of Critical Parameters ”, Proc. of 11th ISH, London (U.K.), Aug. 1999, Vol. 5, pp. 433-436.

P24) B. Cascone, L. Fratelli, C.Petrarca, M.Vitelli: “ Partial Discharge Diagnostics on 3.3 kV, 1.2

kA IGBT Modules ”, Proc. of 11th ISH, London (U.K.), Aug. 1999, Vol. 4, pp. 324-327. P25) L.Egiziano, C.Petrarca, V.Tucci, M.Vitelli “ Insulation Systems for Inverter-Fed Traction

Motors: A Comparison of the Behavior of Different Polyimide-Based Composites”, Proc. of 8th European conference on power electronics and applications, Lausanne, Sept. 1999.

P26) L.Egiziano, G.Lupò, C.Petrarca, V.Tucci, M.Vitelli “Impulse performances of cable

terminations employing stress grading accessories”, Proc. of Conf. on Electrical Insulation and Dielectric Phenomena, Austin, Texas, (USA), Oct. 1999.

P27) C.Petrarca, V.Tucci, M.Vitelli: “Optimization of cables terminations equipped with nonlinear

stress control tubes”, 5th International Conference on Insulated Power cables JICABLE, Paris, June 1999, Vol. 1, pp 805-810.

P28) D.Cerbasi, N.Femia, G.Spagnuolo, M.Vitelli:"Analysis of hard synchronous commutations in

switching converters", Proc. of ISCAS, May 28-31 2000, Geneve, pp. 251-254. P29) D.Cerbasi, N.Femia, G.Spagnuolo, M.Vitelli:"Analysis of soft synchronous commutations in

switching converters", Proc. of ISCAS, May 28-31 2000, Geneve, pp. 268-271. P30) D.Cerbasi, C.Petrarca, V.Tucci, M.Vitelli: "Numerical analysis of performances of stress

grading cable accessories made of different anisotropic composite materials", Proc. of Conf. on Electrical Insulation and Dielectric Phenomena, Victoria BC, Canada, 15-18 Oct. 2000, Vol. 2 pp. 490-493.

P31) G. Lupò, C.Petrarca, V.Tucci, M.Vitelli " The Influence of Coil Parameters on the Voltage

Distribution in a Machine Stator Winding fed by a PWM Induction Motor Drive", Proc. of Conf. on Electrical Insulation and Dielectric Phenomena, Victoria BC, Canada, 15-18 Oct. 2000, Vol. 2 pp. 494-497.

P32) N.Femia, G.Spagnuolo, M.Vitelli: “Generalized invariant models for the analysis of soft-

switching cells” , Proc. of ISCAS 2001, Sidney (Australia), May 2001,Vol. 3, pp. 672-675. P33) N.Femia, G.Spagnuolo, M.Vitelli: "Switching invariant models of soft-switching cells” , Proc.

of Power Electronic Specialists Conference 2001, Vancouver (Canada), June 17-21, Vol. 2, pp. 890-895.

P34) L.Egiziano, N.Femia, G.Spagnuolo, M.Vitelli: “ Steady-state analysis of soft switching converters ” , Proc. of Iecon 2001, Denver, Colorado (USA), Nov. 29-Dec. 2 2001, pp. 978-983.

P35) L.Egiziano, N.Femia, G.Spagnuolo, M.Vitelli: “Analysis of Switching-Invariant

characterisitcs of soft-switching cell” , Proc. of Iecon 2001, Denver, Colorado (USA), Nov. 29-Dec. 2 2001, pp 972-977.

P36) G. Lupò, C. Petrarca, V. Tucci, M. Vitelli : ”MTL model and FEM package for the evaluation

of steep-front surges distribution in machine windings” , Proc. of Conf. on Electrical Insulation and Dielectric Phenomena, Oct. 2001, Canada, pp. 685-688.

P37) R. Candela, C. Petrarca, P. Romano, M. Vitelli :”Numerical Simulation of PD Activity in a

Spherical Cavity Embedded in the Stator Winding Insulation of an Inverter-fed Induction Motor”, Proc. of Conf. on Electrical Insulation and Dielectric Phenomena, Oct. 2001, Canada, pp. 356-360.

P38) N. Femia, M. Vitelli, “Calculation of resistive losses of conductors carrying SMPS current

waveforms” International Symposium on Circuits and Systems, May 2002, Scottsdale, Arizona (USA), Vol. 5, pp. 852-855.

P39) M. Di Lorenzo del Casale, N. Femia, P. Lamberti, V. Mainardi, G. Spagnuolo, M. Vitelli,

“Nominal and tolerance design of closed-loop controllers for DC-DC voltage regulators” , International Symposium on Circuits and Systems, May 2002, Scottsdale, Arizona (USA), Vol. 5, pp. 747-750.

P40) N. Femia, G. Spagnuolo, M. Vitelli, “Tolerance design of DC-DC switching regulators

International Symposium on Circuits and Systems, May 2002, Scottsdale, Arizona (USA), Vol. 4, pp. IV-751 -IV-754.

P41) N. Femia, P. Lamberti, G. Spagnuolo, M. Vitelli, “Resistive losses of conductors carrying

SMPS current waveforms”, Proc. of 2002 IEEE International Symposium on Industrial Electronics, July 2002, L’Aquila, Italy, pp. 890-895.

P42) N. Femia, G. Spagnuolo, M. Vitelli, “Optimized tolerance design of feedback compensation

networks for voltage regulators”, Proc. of 2002 IEEE International Symposium on Industrial Electronics, July 2002, L’Aquila, Italy, pp. 1103-1107.

P43) G. Spagnuolo, M. Vitelli, “Worst-case tolerance design by genetic algorithms”, Proc. of 2002

IEEE International Symposium on Industrial Electronics, July 2002, L’Aquila, Italy, pp. 1178-1183.

P44) N. Femia, P. Lamberti, G. Spagnuolo, M. Vitelli, “Resistive losses of conductors carrying

SMPS current waveforms”, Proc. of Int. IEEE Workshop on Computers in Power Electronics, Mayaguez, Portorico (USA) , June 2002, pp. 47-52.

P45) M. Vitelli, “Range analysis in electroquasistatic field linear problems”, Proc. of Conf. on

Electrical Insulation and Dielectric Phenomena, Oct. 2002, Cancun (Mexico), pp. 168-171.

P46) N. Femia, G. Spagnuolo, M. Vitelli, “Steady-state analysis of pwm dc-to-dc regulators”, International Symposium on Circuits and Systems, May 2003, Bangkok (Thailand), Vol. 3, pp. 288-291.

P47) B. De Vivo, G. Spagnuolo, M. Vitelli, “Worst-Case Tolerance Analysis of Non-Linear

systems using Evolutionary Algorithms” , International Symposium on Circuits and Systems, May 2003, Bangkok (Thailand), Vol. 4, pp. 576-579.

P48) M. Vitelli, “Time-domain analysis of proximity effect current driven problems”,

COMPUMAG 2003, Saratoga Springs – New York (USA). P49) L. Egiziano, G. Spagnuolo, M. Vitelli, “Worst-Case Tolerance Analysis in Static Field

Problems”, COMPUMAG 2003, Saratoga Springs – New York (USA) July 2003, pp.108-109.

P50) B. De Vivo, G. Spagnuolo, V. Tucci, M. Vitelli, “Variability analysis applied to cable accessories made of composite materials”, COMPUMAG 2003, Saratoga Springs – New York (USA), July 2003, pp.148-149.

P51) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli, ”Matching the Photovoltaic Field

Orientation to Load Requirements in stand-alone distributed power systems”, Proc. of IEEE Power Electronics Specialist Conference, June 2004, Aachen (Germany), 0-7803-8399-0/04/$20.00 ©2004 IEEE, pp. 1933-1938.

P52) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli, ”Optimizing Duty-cycle Perturbation of P&O

MPPT Technique”, Proc. of IEEE Power Electronics Specialist Conference, June 2004, Aachen (Germany), 0-7803-8399-0/04/$20.00 ©2004 IEEE, pp. 1939-1944.

P53) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli, ”Optimizing Sampling Rate of P&O MPPT

Technique”, Proc. of IEEE Power Electronics Specialist Conference, June 2004, Aachen (Germany), 0-7803-8399-0/04/$20.00 ©2004 IEEE, pp. 1945-1949.

P54) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli, ”Load Matching of Photovoltaic Field

Orientation in Stand-Alone Distributed Power Systems”, Proc. of IEEE International Symposium on Industrial Electronics, May 2004, Ajaccio (France), 0-7803-8305-2/04/$20.00 ©2004 IEEE, pp. 1011-1015.

P55) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli, ” Increasing the Efficiency of P&O MPPT by

Converter Dynamic Matching”, Proc. of IEEE International Symposium on Industrial Electronics, May 2004, Ajaccio (France), 0-7803-8304-4/04/$20.00 @i2004 IEEE, pp. 1017-1021.

P56) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli, ”Perturb and Observe MPPT Technique

Robustness Improved”, Proc. of IEEE International Symposium on Industrial Electronics, May 2004, Ajaccio (France), 0-7803-8305-2/04/$20.00 ©2004 IEEE, pp. 845-850.

P57) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli, “How to Make Robust a P&O MPPT

Technique”, Proc. of EPE-PEMC, September 2004, Riga, Latvia. P58) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli, “How to Increase the Efficiency of P&O

MPPT by Converter Dynamic Matching”, Proc. of EPE-PEMC, September 2004, Riga, Latvia.

P59) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli, “Matching the Solar Cell Panel Installation

Angle to Load Requirements in Stand-Alone Distributed Power Systems”, Proc. of EPE-PEMC, September 2004, Riga, Latvia.

P60) L.Egiziano, N.Femia, D.Granozio, G.Petrone, G.Spagnuolo, M.Vitelli: “Photovoltaic

Inverters with Perturb&Observe MPPT technique and One-Cycle Control”, Proc. of IEEE 2006 International Symposium on Circuits and Systems (ISCAS ’06), Kos, Greece, May 21-24, 2006, 0-7803-9390-2/06/$20.00 ©)2006 IEEE, pp. 3718-3721.

P61) N.Femia, G.Petrone, G.Spagnuolo, M.Vitelli: “One-Cycle control of converters operating in

DCM”, Proc. of IEEE 2006 International Symposium on Circuits and Systems (ISCAS ’06), Kos, Greece, May 21-24, 2006, 0-7803-9390-2/06/$20.00 ©2006 IEEE, pp. 839-842.

P62) L.Egiziano, N.Femia, D.Granozio, G.Petrone, G.Spagnuolo, M.Vitelli: “Optimization Of A

Single Stage Inverter With One Cycle Control For Photovoltaic Power Generation”, Proc. of IASTED International Conference on Advanced Technology in the Environmental Field (ATEF 2006), Lanzarote, Spain, February 06-08, 2006.

P63) L.Egiziano, N.Femia, D.Granozio, G.Petrone, G.Spagnuolo, M.Vitelli: “Performances

Improvement Of Maximum Power Point Tracking Perturb And Observe Method”, Proc. of IASTED International Conference on Advanced Technology in the Environmental Field (ATEF 2006), Lanzarote, Spain, February 06-08, 2006.

P64) B. De Vivo, C. Petrarca, V. Tucci, M. Vitelli: “A multi conductor transmission line model for

the evaluation of the rotor shaft voltages in adjustable speed drive motors”, Proceedings of PIERS (Progress in Electromagnetic Research Symposium), pp. 236-240, 26–29 March 2006, Cambridge, USA.

P65) G.Petrone, G.Spagnuolo, M.Vitelli: “A model of mismatched photovoltaic fields for

simulating hybrid solar vehicles”, Proc. of International Workshop on Hybrid and Solar Vehicles", University of Salerno, Salerno (Italy), November 5-6, 2006, pp. 43-48.

P66) A.Giustiniani, G.Petrone, C.Pianese, M.Sorrentino, G.Spagnuolo, M.Vitelli: “PEM Fuel Cells

Control by means of the Perturb and Observe Technique”, Proc. of 32nd Annual Conference of the IEEE Industrial Electronics Society (IECON-2006), Paris (France), November 7-10, 2006, 1-4244-0136-4/06/$20.00 '2006 IEEE, pp.4349-4354.

P67) L.Egiziano, N.Femia, M.Fortunato, G.Spagnuolo, G.Petrone, M.Vitelli: “Dynamic Model of

One-Cycle control for converters operating in CCM and DCM”, Proc. of 32nd Annual Conference of the IEEE Industrial Electronics Society (IECON-2006), Paris (France), November 7-10, 2006, 1-4244-0136-4/06/$20.00 '2006 IEEE, pp.2150-2155.

P68) N.Femia, G.Petrone, G.Spagnuolo, M.Vitelli: “Guidelines for the Optimization of the P&O

Technique in Grid-connected Double-stage Photovoltaic Systems”, Proc. of ISIE 2007, Vigo (Spain), May, 2007, 1-4244-0755-9/07/$20.00 C 2007 IEEE, pp. 2420-2425.

P69) L. Egiziano, N.Femia, G.Petrone, G.Spagnuolo, M.Vitelli: “Design and Optimization of a

Maximum Power Point Tracking controller for a PV battery charger”, Proc. of ISIE 2007, Vigo (Spain), May, 2007, 1-4244-0755-9/07/$20.00 C 2007 IEEE, pp. 2426-2431.

P70) L. Egiziano, A. Giustiniani, G.Petrone, G.Spagnuolo, M.Vitelli: “Experimental characterization of the photovoltaic generator for a hybrid solar vehicle ”, Proc. of ISIE 2007, Vigo (Spain), May, 2007, 1-4244-0755-9/07/$20.00 C 2007 IEEE, pp. 329-334.

P71) L. Beneduce, G. Costabile, B. De Vivo, L. Egiziano, S. Iovieno, A. Masucci, V. Tucci, M.

Vitelli: “An accurate evaluation of electric discharge machining bearings currents in inverter-driven induction motors”, European Conference on Power Electronics and Applications, Aalborg (Denmark), 2 - 5 September 2007, pp. 1-8.

P72) M. Fortunato, A. Giustiniani, G. Petrone, G. Spagnuolo, M.Vitelli : “Multi-objective

optimization and MPPT in a Single Stage Photovoltaic Inverter”, Proc. of ISIE 2008, Cambridge (UK), June 2008, 978-1-4244-1666-0/08/$25.00 '2008 IEEE, pp. 2432-2437.

P73) N. Femia, G. Lisi, G. Petrone, G. Spagnuolo, M. Vitelli: “Analysis of Photovoltaic Systems

with Distributed Maximum Power Point Tracking”, Proc. of ISIE 2008, June 2008, Cambridge (UK), 978-1-4244-1666-0/08/$25.00 '2008 IEEE, pp. 2408-2413.

P74) L. Egiziano, A. Giustiniani, G. Petrone, G. Spagnuolo, M. Vitelli: “Fighting Fuel Cell Current

Oscillations in Grid Connected Applications”, International Conference on Clean Electrical Power ICCEP09, Capri (Italy), 978-1-4244-2544-0/08/$20.00 ©2009 IEEE, pp. 768–774.

P75) L. Egiziano, A. Giustiniani, G. Petrone, G. Spagnuolo, M. Vitelli: “Optimization of Perturb and

Observe Control of Grid Connected PEM Fuel Cells”, International Conference on Clean Electrical Power ICCEP09, Capri (Italy), 978-1-4244-2544-0/08/$20.00 ©2009 IEEE, pp. 775–781.

P76) L. Egiziano, M. Fortunato, G. Petrone, G. Spagnuolo, M. Vitelli: “Dynamic model of a grid-

connected photovoltaic inverter with One Cycle Control”, 35th Annual Conference of the IEEE Industrial Electronics Society, Porto (Portugal), 3-5-Nov. 2009, 978-1-4244-4649-0/09/$25.00 ©2009 IEEE, pp. 4561-4565.

P77) N. Femia, G. Adinolfi, G. Petrone, G. Spagnuolo, M. Vitelli: “Energy efficiency effective design of

DC/DC converters for DMPPT PV applications”, 35th Annual Conference of the IEEE Industrial Electronics Society, Porto (Portugal), 3-5-Nov. 2009, 978-1-4244-4649-0/09/$25.00 ©2009 IEEE, pp. 4602-4606.

P78) G. Petrone, G. Spagnuolo, M. Vitelli: “A cheap and efficient photovoltaic emulator”, 24th European

Photovoltaic Solar Energy Conference and Exhibition, 21 – 25 September 2009, Hamburg (Germany).

P79) E. Mamarelis, C. A. Ramos-Paja, G. Petrone, G. Spagnuolo, M. Vitelli, R. Giral “FPGA-

based controller for mitigation of the 100 Hz oscillation in grid connected PV systems”, 14-17 March 2010, ICIT 2010, Viña del Mar, Chile, 978-1-4244-5697-0/10/$25.00 ©2010 IEEE, pp. 925-930.

P80) G. Petrone, G. Spagnuolo, M. Vitelli: “TEODI: A new technique for Distributed Maximum

Power Point Tracking PV Applications”, 14-17 March 2010, ICIT 2010, Viña del Mar, Chile, 978-1-4244-5697-0/10/$25.00 ©2010 IEEE, pp. 982-987.

P81) C. A. Ramos-Paja, G. Spagnuolo, G. Petrone, M. Vitelli, J. D. Bastidas : “A Multivariable MPPT algorithm for Granular Control of Photovoltaic Systems”, 4-7 July 2010, Bari, Italy, ISIE 2010, 978-1-4244-6391-6/10/$26.00 ©2010 IEEE, pp 3433-3437.

P82) G.Frattini, G.Petrone, G.Spagnuolo, M.Vitelli: “ AC Module Design Employing Low Capacitance

Values”, 4-7 July 2010, Bari, Italy, ISIE 2010, 978-1-4244-6391-6/10/$26.00 ©2010 IEEE, pp 3444-3449.

P83) G. Petrone, G. Spagnuolo, M. Vitelli: “TEODI: PV MPPT based on the Equalization of the

Output operating points in correspondence of the forced Displacement of the Input operating points”, 4-7 July 2010, Bari, Italy, ISIE 2010, 978-1-4244-6391-6/10/$26.00 ©2010 IEEE, pp 3463-3468.

P84) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “OPTIMAL CONTROL OF PHOTOVOLTAIC

ARRAYS”, ELECTRIMACS, 6-8th June 2011, Cergy-Pontoise, France, ISBN: 978-2-7466-3454-1.

P85) Enrico Bianconi, Javier Calvente, Roberto Giral, Giovanni Petrone, Carlos Andr´es Ramos-

Paja, Giovanni Spagnuolo, Massimo Vitelli: “Improving the Perturb and Observe maximum power point tracking by using Sliding Mode Control”, ISIE 2011, 27-30 June 2011, Gdansk, Poland, 978-1-4244-9311-1/11/$26.00 ©2011 IEEE, pp. 310-315.

P86) Enrico Bianconi, Javier Calvente, Roberto Giral, Giovanni Petrone, Carlos Andr´es Ramos-

Paja, Giovanni Spagnuolo, Massimo Vitelli: “A fast current-based MPPT technique based on sliding mode control”, ISIE 2011, 27-30 June 2011, Gdansk, Poland, 978-1-4244-9311-1/11/$26.00 ©2011 IEEE, pp. 59-64.

P87) G. Graditi, G. Adinolfi, N. Femia, M. Vitelli:” Comparative Analysis of Synchronous Rectification Boost and Diode Rectification Boost Converter for DMPPT Applications”, ISIE 2011, ISIE 2011, 27-30 June 2011, Gdansk, Poland, 978-1-4244-9311-1/11/$26.00 ©2011 IEEE, pp. 1000-1005.

P88) M. Balato, N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “Factors limiting the efficiency of

DMPPT in PV applications”, International Conference on Clean Electrical Power 2011, Ischia, 14-16 June 2011, 978-1-4244-8927-5/11/$26.00 ©2011 IEEE, pp. 604-608.

P89) G. Petrone, G. Spagnuolo, M. Vitelli: “'Digital implementation of One Cycle Control in back to back converters“, 3rd International Symposium on Power Electronics for Distributed Generation Systems (PEDG), 2012, AALBORG, DENMARK, pp. 344-348, 978-1-4673-2023-8/12/$31.00/ ©2012 IEEE.

P90) M. Balato, M. Vitelli: “A new strategy for the identification of optimal operating points in PV applications with Distributed MPPT”, 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER), March 27-30, 2013 - Monaco, ISBN 978-1-4673-5271-0, pp. 1-5.

P91) M. Balato, M. Vitelli: “A Hybrid MPPT technique based on the Fast Estimate of the Maximum Power Voltages in PV applications”, 2013 Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER), March 27-30, 2013 - Monaco, ISBN 978-1-4673-5271-0, pp. 1-5.

P92) Pietro Luigi Carotenuto, Salvatore Curcio, Patrizio Manganiello, Giovanni Petrone, Giovanni Spagnuolo, Massimo Vitelli, “Algorithms and devices for the dynamical reconfiguration of PV arrays”, PCIM 2013 International Exhibition and Conference on Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, ISBN 978-3-8007-3505-1, Nuremberg, May 14-16, 2013, pp. 765 -772.

P93) Marco Balato, Daniele Gallo, Carmine Landi, Mario Luiso, Massimo Vitelli “Simulation and Laboratory Characterization of a Hybrid MPPT technique based on the Fast Estimate of the Maximum Power Voltages in PV applications”, Instrumentation and Measurement Technology Conference (I2MTC), Minneapolis, May 6-9 2013, DOI: 10.1109/I2MTC.2013.6555412, ISBN 978-1-4673-4621-4, pp. 218 - 223

P94) G. Aurilio, M. Balato, D. Gallo, C. Landi, M. Luiso, M. Vitelli, “Design and Implementation of a Hybrid MPPT technique based on the Scan of the Power vs Voltage input characteristic of the inverter”, 19th IMEKO TC 4 Symposium, ISBN 84-616-5438-2, July 18-19, 2013, Barcelona, Spain, pp. 1-6.

P95) M. Balato, D. Gallo, C. Landi, M. Luiso, M. Vitelli, “Design and characterization of a HMPPT technique for PV applications”, 2013 IEEE International Workshop on Applied Measurements for Power Systems (AMPS 2013), ISBN 978-1-4673-5571-1, September 25-27 2013, Aachen, Germany, pp. 1-6.

P96) M. Balato, P. Manganiello, M. Vitelli, “ Fast Dynamical Reconfiguration algorithm of PV Arrays”, 2014 Ninth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER), March 25-27, 2014 - Monaco, ISBN 978-1-4799-3787-5/14/, pp. 1-8.

P97) M. Balato, M. Vitelli, “An algorithm for the Estimation of the Maximum Power Voltages in microconverters based PV applications”, 2014 Ninth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER), March 25-27, 2014 - Monaco, ISBN 978-1-4799-3787-5/14/, pp. 1-8.

P98) Francesco Barra, Marco Balato, Luigi Costanzo, Daniele Gallo, Carmine Landi, Mario Luiso,

Massimo Vitelli, “Dynamic and Reconfigurable Photovoltaic Emulator Based on FPAA”, 20th IMEKO TC4 International Symposium, 15-17 September 2014, Benevento, Italy, pp. 1005-1010, ISBN-14: 978-92-990073-2-7.

P99) M. Balato, L. Costanzo, M. Vitelli, “Closed-form analysis of Switchless Electrostatic

Vibration Energy Harvesters”, 2015 Tenth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER), March 31- April 2, 2015 - Monaco, ISBN 978-1-4673-6785-1/15/$ 31.00 © 2015, pp. 1-8.

P100) M. Balato, L. Costanzo, M. Vitelli, “Optimization of both the energetic efficiency and the

duration of life of PV arrays by means of the dynamical reconfiguration of PV modules connections”, 2015 Tenth International Conference and Exhibition on Ecological Vehicles and Renewable Energies (EVER), March 31- April 2, 2015 - Monaco, ISBN 978-1-4673-6785-1/15/$ 31.00 © 2015, pp. 1-8.

P101) M. Balato, L. Costanzo, P. Marino, L. Rubino, M. Vitelli, “Dual Implementation of the MPPT technique TEODI: Uniform and Mismatching operating conditions”, International conference on Clean Electrical Power (ICCEP), pp. 439-446, 2015, 978-1-4799-8704-7/15.

P102) M. Balato, L. Costanzo, P. Marino, L. Rubino, M. Vitelli, “High performance non isolated

interleaved switched inductance converter for PV sources”, International conference on Clean Electrical Power (ICCEP), pp. 19-26, 2015, 978-1-4799-8704-7/15.

P103) Osvaldo Brignole, Claudio Cavalletti, Gianluigi Lauro, Antonino Maresca, Nadia Mazzino,

Marco Balato, Antonio Buonomo, Luigi Costanzo, Massimiliano Giorgio, Roberto Langella, Alessandro Lo Schiavo, Donato Scaldarella, Alfredo Testa, Luigi Verde, Massimo Vitelli: “Experimental Analysis of Mechanical Vibrations and Wind Speed for a Rail Vehicle WSN fed by Energy Harvesters”, CONVEGNO ANNUALE INTERNAZIONALE AEIT, Napoli, 14-16 ottobre 2015, pp. 1-6.

P104) M. Balato, L. Costanzo, M. Vitelli, “Identification of the parameters of the equivalent

electric circuit of electromagnetic harvesters”, 4th International Conference on Renewable Energy Research and Applications, ICRERA 2015, Palemo, 22-25 Nov. 2015, pp. 1641-1645.

P105) M. Balato, L. Costanzo, M. Vitelli, “Multi-Objective Optimization of PV arrays

performances by means of the dynamical reconfiguration of PV modules connections”, 4th International Conference on Renewable Energy Research and Applications, ICRERA 2015, Palemo, 22-25 Nov. 2015, pp. 1646-1650.

P106) M. Balato, L. Costanzo, M. Vitelli, “Series-Parallel PV arrays: a comparison between the

performances of two algorithms for strings with an equal or with a different number of PV modules”, PEMC 2016, Varna, pp. 1269-1274.

P107) M. Balato, L. Costanzo, M. Vitelli, “Resonant Electromagnetic Vibration Harvesters

feeding Sensor Nodes for real-time Diagnostics and Monitoring in Railway Vehicles for Goods Transportation: a numerical-experimental analysis”, PEMC 2016, Varna, pp. 456-461.

P108) M. Balato, L. Costanzo, M. Vitelli, “Resonant Electromagnetic Vibration Energy

Harvesters: the Harvester Ideal Utilization Factor”, PEMC 2016, Varna, pp. 769-774.

P109) L. Costanzo, M. Vitelli, “The Ideal Utilization Factor: a tool to optimize the energetic performances of Resonant Electromagnetic Vibration Energy Harvesters”, 2018 Thirteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), pp. 1-7, DOI: 10.1109/EVER.2018.8362383.

P110) L. Costanzo, M. Vitelli, “Resonant Electromagnetic Vibration Harvesters

applications:optimization of P&O MPPT technique parameters”, 2018 Thirteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), pp. 1-8, DOI: 10.1109/EVER.2018.8362384.

P111) N. Femia, V. Tucci, M. Vitelli: Characterization of the active zone for leader propagation in

SF6", L. G. Christophorou, D.R. James eds., Plenum Press, New York, 1994, pp. 105-112, Proc. of VII International Symposium on Gaseous Dielectrics, Knoxville (TN).

INTERNATIONAL JOURNALS

P112) N.Femia, G.Lupò, C.Petrarca, V.Tucci, M.Vitelli: "Performances of High voltage glass insulators subjected to fast transient overvoltages", European Transactions on Electrical Power Vol. 6, No. 2, Germany, March/April 1996, pp.119-124.

P113) G.Lupò, G: Miano, V.Tucci, M.Vitelli: "Field distribution in cable terminations from a

Quasi-static Approximation of the Maxwell Equations", IEEE Trans. on Dielectrics and Electrical Insulation, Piscataway NJ (USA), Vol.3, No.3, June 1996, pp. 399-409.

P114) L.Egiziano, G. Lupò, C.Petrarca, V.Tucci, M. Vitelli: ” Partial Discharges Testing on Resin

Insulated Voltage Transformers”, Electrical Engineering, Archiv für Elektrotechnik, Germany, Vol. 81, No. 2, May 1998, pp. 89-97.

P115) L.Egiziano, C.Petrarca, V.Tucci, M. Vitelli:“ A Galerkin model to study the field

distribution in electrical components employing non-linear stress grading materials”, IEEE Trans. on Dielectrics and Electrical Insulation, Piscataway NJ (USA), Vol.6, No.6, Dec. 1999, pp. 765-773.

P116) M.Vitelli: “Numerical performance analysis of semiconductor coatings for corona

suppression”, IEEE Trans. on Dielectrics and Electrical Insulation, Piscataway NJ (USA), Vol.6, No.6, Dec. 1999, pp. 774-780.

P117) L.Egiziano, G.Lupò, C.Petrarca, V.Tucci, M.Vitelli: “Interpretation and Classification of

PD in a HV Criogenic Cable Termination”, IEEE Trans. on Dielectrics and Electrical Insulation, Piscataway NJ (USA), Vol.7, No.1, Feb. 2000, pp. 71-77.

P118) G.Lupò, C.Petrarca, V.Tucci and M.Vitelli: “EM fields generated by lightning channels with

arbitrary location and slope “, IEEE Trans. on Electromagnetic Compatibility, Piscataway NJ (USA), Vol. 42, No.1, Feb. 2000, pp. 39-53.

P119) L.Angrisani, P.Daponte, G.Lupò, C.Petrarca, M.Vitelli: “ Analysis of ultrawide-band

detected partial discharge by means of a multiresolution digital signal-processing method”, Measurement 27 (2000), Elsevier, pp. 207-221.

P120) C.Petrarca, V.Tucci, M. Vitelli: “Temperature distribution along an outdoor insulator

subjected to different pollution levels” , IEEE Trans. on Dielectrics and Electrical Insulation, Piscataway NJ (USA), Vol. 7, N. 3, June 2000, pp. 416-423.

P121) V.Tucci and M.Vitelli: “On the effect of anisotropy in nonlinear composite materials for

stress grading applications. A Numerical study", IEEE Trans. on Dielectrics and Electrical Insulation, Piscataway NJ (USA), Vol. 7, N. 3, June 2000, pp. 387-393.

P122) G.Lupò, C.Petrarca, V.Tucci and M.Vitelli: “EM fields associated with lightning channels:

on the effect of tortuosity and branching”, IEEE Trans. on Electromagnetic Compatibility, Piscataway NJ (USA), Vol. 42, No.4, Nov. 2000, pp. 394-404.

P123) G.Lupò, C.Petrarca, V.Tucci and M.Vitelli: “Multiconductor transmission line analysis of

steep-front surges in machine windings”, IEEE Trans. on Dielectrics and Electrical Insulation, Volume 9, No 3, June 2002, pp 467 –478.

P124) N. Femia, G. Spagnuolo, M. Vitelli: ” Steady-state analysis of soft-switching converters”, IEEE Trans. On Circuits and Systems-I: Fundamental Theory and Applications, Vol. 49, No. 7, pp. 939-954, July 2002.

P125) N. Femia, G. Spagnuolo, M. Vitelli: ”Unified Analysis of Synchronous Commutations in

Switching Converters”, IEEE Trans. On Circuits and Systems-I: Fundamental Theory and Applications, Vol. 49, No. 8, pp. 1150-1166, August 2002.

P126) M. Vitelli: “Calculation of per unit length resistance and internal inductance in 2-D skin-

effect current driven problems” IEEE Trans. on Electromagnetic Compatibility, Piscataway NJ (USA), Vol. 44, No.4, Nov. 2002, pp. 529-538.

P127) M. Vitelli: “Range analysis in electroquasistatic field linear problems”, IEEE Trans. on

Dielectrics and Electrical Insulation, Volume 10, No 1, February 2003, pp 155 –167. P128) N. Femia, G. Spagnuolo, M. Vitelli: “Steady-state analysis of PWM DC-to-DC regulators ” ,

IEEE trans. on Aerospace and Electronic Systems, Vol 39, No 1, Jan 2003, pp. 318-334. P129) N.Femia, M.Vitelli: “Understanding commutations in switching converters – Part II:

analysis and synthesis of DC-DC regulators”, IEEE trans. on Aerospace and Electronic Systems, Vol 39, No 1, Jan 2003, pp. 298-317.

P130) N. Femia, G. Spagnuolo, M. Vitelli: “Steady-state analysis of hard and soft switching DC-

to-DC regulators ” , IEEE trans. on Power Electronics, Vol 18, No 1, Jan 2003, pp. 51-64. P131) N.Femia, M.Vitelli: “Time domain analysis of switching converters based on a discrete-time

transition model of the spectral coefficients of state variables ”, IEEE trans. On Circuits and Systems-I: Fundamental Theory and Applications, Vol. 50, Issue 11, Nov. 2003, pp. 1447-1460.

P132) A. Maffucci, C. Petrarca, V. Tucci, M. Vitelli: ”Analysis of the Voltage distribution in a

motor stator winding subjected to steep-fronted surge voltages by means of a Multiconductor lossy transmission line model”, IEEE trans. on Energy Conversion, Vol. 19, No. 1, March 2004, 0885-8969/04$20.00 © 2004 IEEE, pp.7-17.

P133) G. Petrone, G. Spagnuolo, M. Vitelli, “Worst-Case Tolerance Analysis in Static Field

Problems”, IEEE trans. on Magnetics, Vol. 40, Issue 2, March 2004, 0018-9464/04$20.00 © 2004 IEEE, pp.366-370.

P134) B. De Vivo, G. Spagnuolo, M. Vitelli, “Variability analysis applied to cable accessories

made of composite materials”, IEEE trans. on Magnetics, Vol. 40 , Issue 2 , March 2004, 0018-9464/04$20.00 © 2004 IEEE, pp. 418- 425.

P135) L. Egiziano, M. Vitelli, “Time-domain analysis of proximity effect current driven problems”,

IEEE trans. on Magnetics, Vol. 40 , Issue 2, March 2004, 0018-9464/04$20.00 © 2004 IEEE, pp.379-383.

P136) M. Vitelli: “Numerical evaluation of 2-D proximity effect conductor losses”, IEEE trans. on

Power Delivery, Vol. 19, No. 3, July 2004, 0885-8977/04$20.00 © 2004 IEE, pp. 1291-1298.

P137) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “Optimization of Perturb and Observe Maximum Power Point Tracking Method” , IEEE trans. on Power Electronics, Vol 20, No 4, July 2005, 0885-8969/04$20.00 © 2004 IEEE, pp. 963 - 973.

P138) N. Femia, D. Granozio, G. Petrone, G. Spagnuolo, M. Vitelli : “Optimized One Cycle

Control in Photovoltaic Grid Connected Applications”, IEEE Transactions on Aerospace and Electronic Systems, Vol 42, No 3, July 2006, 0018-9251/06/$17.00 © 2006 IEEE, pp. 954 - 972.

P139) G. Petrone, G. Spagnuolo, M. Vitelli: “Analytical model of mismatched photovoltaic fields

by means of Lambert W-function”, Solar Energy Materials & Solar Cells, Elsevier, 3 July 2007, doi:10.1016/j.solmat.2007.05.021, ISSN 0927-0248, pp. 1652-1657.

P140) N. Femia, D. Granozio, G. Petrone, G. Spagnuolo, M. Vitelli : “Predictive & Adaptive

MPPT Perturb and Observe Method”, IEEE trans. on Aerospace and Electronic Systems, Vol 43, No 3, July 2007, 0018-9251/07/$25.00 ©2007 IEEE , pp. 934-950.

P141) N. Femia, G. Lisi , G. Petrone, G. Spagnuolo, M. Vitelli: ”Distributed Maximum Power

Point Tracking of Photovoltaic Arrays: novel approach and system analysis”, IEEE Transactions on Industrial Electronics, Vol 55, No 7, July 2008, 0278-0046/$25.00 © 2008 IEEE, pp. 2610 - 2621.

P142) M. Fortunato, A. Giustiniani, G. Petrone, G. Spagnuolo, M. Vitelli: ” Maximum Power Point

Tracking in a One Cycle Controlled Single stage Photovolatic Inverter”, IEEE Transactions on Industrial Electronics, Vol 55, No 7, July 2008, 0278-0046/$25.00 © 2008 IEEE, pp. 2684 - 2693.

P143) G. Petrone, G. Spagnuolo, R. Teodorescu, M. Veerachary, M. Vitelli: ”Reliability issues in

Photovoltaic Power Processing Systems”, IEEE Transactions on Industrial Electronics, Vol 55, No 7, July 2008, 0278-0046/$25.00 © 2008 IEEE, pp. 2569 - 2580.

P144) G. Petrone, G. Spagnuolo, R. Teodorescu, M. Veerachary, M. Vitelli: Guest Editorial, IEEE

Transactions on Industrial Electronics, Vol 55, No 7, July 2008, 0278-0046/$25.00 © 2008 IEEE, pp. 2566 – 2568.

P145) N. Femia, M. Fortunato, G. Petrone, G. Spagnuolo, M. Vitelli: ” Dynamic Model of One-Cycle

Control for Converters Operating in Continuous and Discontinuous Conduction Mode”, International Journal of Circuit Theory and Applications, Vol 37, 2009, DOI: 10.1002/cta.497, pp. 661-684.

P146) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “A Technique for Improving P&O MPPT

performances of Double Stage Grid-Connected Photovoltaic Systems”, IEEE Transactions on Industrial Electronics, Vol. 56, No 11, November 2009, 0278-0046/$26.00 © 2009 IEEE, pp. 4473 - 4482.

P147) G. Petrone, G. Spagnuolo, R. Teodorescu, M. Veerachary, M. Vitelli: Guest Editorial, IEEE

Transactions on Industrial Electronics, Vol. 56, No 11, November 2009, 0278-0046/$26.00 © 2009 IEEE, pp.4307 – 4310.

P148) I. Arsie, A. Di Domenico, A. Giustiniani, G. Petrone, C. Pianese, M. Sorrentino, G. Spagnuolo, M.

Vitelli: “Enhancing Polymeric Electrolyte Membrane Fuel Cell Control by Means of the

Perturb and Observe Technique”, Journal of Fuel Cell Science and Technology, Transactions of the ASME - AMER SOC MECHANICAL ENG, February 2010, Vol. 7, Iss. 1, 011021-1 / 011021-11, DOI: 10.1115/1.3120275, ISSN: 1550-624X, EISSN: 1551-6989.

P149) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “A new analog MPPT technique : TEODI ”,

Progress in Photovoltaics: Research and applications, Wiley-Blackwell, 2010, Vol. 18, pp. 28-41, DOI: 10.1002/PIP.943, ISSN (printed): 1062-7995. ISSN (electronic): 1099-159X.

P150) G. Adinolfi, N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “Design of dc/dc Converters

for DMPPT PV Applications Based on the Concept of Energetic Efficiency”, Journal of Solar Energy Engineering, Transactions of the ASME - AMER SOC MECHANICAL ENG, May 2010, Vol. 132, pp. 021005-1 / 021005-10, doi:10.1115/1.4001465, ISSN: 0199-6231, EISSN: 1528-8986.

P151) A. Giustiniani, G. Petrone, G. Spagnuolo, M. Vitelli: “Low frequency current oscillations and

maximum power point tracking in grid-connected fuel cell based systems”, IEEE Transactions on Industrial Electronics, VOL. 57, NO. 6, pp. 2042-2053, JUNE 2010, Digital Object Identifier 10.1109/TIE.2009.2034175, 0278-0046/$26.00 © 2010 IEEE.

P152) D. Hissel, G. Spagnuolo, M. Vitelli: Guest Editorial, IEEE Transactions on Industrial

Electronics, Vol. 57, No. 6, pp. 1850-1852, June 2010, Digital Object Identifier 10.1109/TIE.2010.2045453, 0278-0046/$26.00 © 2010 IEEE.

P153) G. Petrone, G. Spagnuolo, M. Vitelli: “A Multi-Variable Perturb and Observe Maximum Power

Point Tracking Technique Applied to a Single Stage Photovoltaic Inverter”, IEEE Transactions on Industrial Electronics, VOL. 58, NO. 1, January 2011, pp. 76-84, Digital Object Identifier 10.1109/TIE.2010.2044734, 0278-0046/$26.00 © 2011 IEEE.

P154) G. Petrone, G. Spagnuolo, M. Vitelli: “Distributed Maximum Power Point Tracking: challenges and commercial solutions", Automatika Journal for Control, Measurement, Electronics, Computing and Communications, doi: 10.7305, Online ISSN 1848-3380, Print ISSN 0005–1144, Vol. 53, No. 2, pp. 128-141, Zagreb, Croatia, 2012.

P155) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “Optimal Control of Photovoltaic Arrays”, Mathematics and Computers in Simulation, 2012, http://dx.doi.org/10.1016/j.matcom.2012.05.002, 0378-4754/$36.00 © 2012 IMACS.

P156) G. Petrone, G. Spagnuolo, M. Vitelli "An analog technique for Distributed MPPT PV applications" IEEE Transactions on Industrial Electronics, Vol. 59, N. 12, December 2012, pp. 4713-4722, DIGITAL OBJECT IDENTIFIER 10.1109/TIE.2011.2177613, 0278-0046/$26.00 © 2011 IEEE.

P157) M. Vitelli: “' On the necessity of joint adoption of both Distributed Maximum Power Point Tracking and Central Maximum Power Point Tracking in PV systems“, Progress in Photovoltaics: Research and applications, Wiley-Blackwell, 2012, DOI: 10.1002/PIP.2256, PP. 1-17, 1099-159X.

P158) G. Petrone, C. Ramos, G. Spagnuolo, M. Vitelli: “Granular control of photovoltaic arrays by means of a multioutput MPPT algorithm”, Progress in Photovoltaics: Research and Applications, Wiley-Blackwell, 2012, DOI: 10.1002/pip.2179, pp. 1-15, 1099-159X.

P159) Enrico Bianconi, Javier Calvente, Roberto Giral, Emilio Mamarelis, Giovanni Petrone, Carlos Andr´es Ramos-Paja, Giovanni Spagnuolo, Massimo Vitelli: “Perturb and Observe MPPT-algorithm with a Current Controller based on the Sliding Mode”, International Journal of Electrical Power and Energy Systems, http://dx.doi.org/10.1016/j.ijepes.2012.07.046, Vol. 44, pp. 346-356, 0142-0615/$.

P160) Enrico Bianconi, Javier Calvente, Roberto Giral, Emilio Mamarelis, Giovanni Petrone, Carlos Andr´es Ramos-Paja, Giovanni Spagnuolo, Massimo Vitelli : “A fast current-based MPPT technique based on sliding mode control” IEEE Trans. On Industrial Electronics, Vol. 60, No. 3, March 2013, pp. 1168-1178, 0278-0046/$31.00 © 2012 IEEE.

P161) N. Femia, M. Fortunato, M. Vitelli: “Light-to-Light: PV-fed LED Lighting Systems Matching PV and LED Power”, IEEE Transactions on Power Electronics, Vol. 28, Issue 8, August 2013, pp. 4063-4073, DOI 10.1109/TPEL.2012.2229297, ISSN 0885-8993, 0885-8993/$31.00 © 2012 IEEE.

P162) Carlos Andres Ramos-Paja, Andres Julian Saavedra-Montes, Massimo Vitelli, “Distributed maximum power point tracking with overvoltage protection for PV systems”, Revista DYNA - Medellin, Centro Editorial - Facultad de Minas Universidad Nacional de Colombia - Sede Medellín, year 80, Nro. 178, pp. 141-150, April 2013. ISSN 0012-7353.

P163) E. Mamarelis, C. A. Ramos-Paja, G. Petrone, G. Spagnuolo, M. Vitelli, R. Giral, “Reducing the hardware requirements in FPGA-based controllers: a photovoltaic application “, Rev. Fac. Ing. Univ. Antioquia, N.° 68, pp. 75-87, Sept. 2013. ISSN 0120-6230.

P164) Gianluca Aurilio, Marco Balato, Daniele Gallo, Giorgio Graditi, Carmine Landi, Mario Luiso, Massimo Vitelli: “Fast Hybrid MPPT Technique for Photovoltaic Applications: numerical and experimental validation”, Advances in Power Electronics, Hindawi Publishing Corporation, Vol. 2014, Article ID 125918, doi:10.1155/2014/125918, http://dx.doi.org/10.1155/2014/125918.

P165) M. Balato, M. Vitelli, “A new control strategy for the optimization of Distributed MPPT in PV applications”, International Journal of Electrical Power and Energy Systems, (2014), Vol. 62, pp. 763-773, DOI information: 10.1016/j.ijepes.2014.05.032, Publisher Item Identifier (PII): S0142-0615(14)00303-2.

P166) M. Balato, M. Vitelli, “Optimitation of Distributed Maximum Power Point tracking PV applications: the Scan of the Power vs Voltage input characteristic of the inverter”, International Journal of Electrical Power and Energy Systems, Elsevier, http://dx.doi.org/10.1016/j.ijepes.2014.03.058, (2014) Vol. 60, pp. 334–346.

P167) M. Balato, M. Vitelli: “An algorithm for the fast estimate of the Maximum Power voltages in PV applications adopting microconverters”, Compel, 2015, Vol. 34, No. 1, pp. 110-131, EmeraldGroup Publishing Limited, 0332-1649, DOI 10.1108/COMPEL-11-2013-0378.

P168) M. Balato, L. Costanzo, M. Vitelli: “Series-Parallel PV array re-configuration:

maximization of the extraction of energy and much more”, Applied Energy, Elsevier, http://dx.doi.org/10.1016/j.apenergy.2015.08.073, ISSN: 0306-2619, pp 145-160, (159) 2015.

P169) P. Manganiello, M. Balato, M. Vitelli : "A survey on Mismatching and Aging of PV

Modules: The Closed Loop", IEEE Transactions on Industrial Electronics, Vol. 62, No. 11,

November 2015, pp. 7276-7286, ISBN 0278-0046, DIGITAL OBJECT IDENTIFIER 10.1109/TIE.2015.2418731.

P170) M. Balato, L. Costanzo, D. Gallo, C. Landi, M. Luiso, M. Vitelli, “Design and

implementation of a dynamic FPAA based Photovoltaic Emulator”, Solar Energy, Elsevier, 2015, pp. 102-115, DOI: 10.1016/j.solener.2015.11.006, ISSN: 0038-092X.

P171) M. Balato, L. Costanzo, M. Vitelli, “Maximum Power Point Tracking techniques”, Wiley Online Encyclopedia of Electrical and Electronics Engineering, John Wiley & Sons, New Jersey, Published Online: 15 FEB 2016, DOI: 10.1002/047134608X.W8299, pp. 1-26.

P172) M. Balato, L. Costanzo, M. Vitelli “Resonant electromagnetic vibration harvesters:

determination of the equivalent electric circuit parameters and simplified closed-form analysis for the identification of the optimal bridge rectifier DC load”, International Journal of Electric Power and Energy Systems, Vol. 84, pp. 111-123, http://dx.doi.org/10.1016/j.ijepes.2016.05.004, 0142-0615/@ 2016.

P173) M. Balato, L. Costanzo, M. Vitelli, “Reconfiguration of PV modules: a tool to get the best

compromise between maximization of the extracted power and minimization of localized heating phenomena”, Solar Energy , Vol. 138, 2016, pp. 105–118, DOI information: 10.1016/j.solener.2016.09.011, 0038-092X.

P174) M. Balato, L. Costanzo, M. Vitelli, “MPPT in Wireless Sensor Nodes Supply Systems Based

on Electromagnetic Vibration Harvesters for Freight Wagons Applications”, IEEE Transactions on Industrial Electronics, Vol. 6, No. 5, May 2017, pp. 3576-3586, ISBN 0278-0046, DOI: 10.1109/TIE.2016.2644605.

P175) M. Balato, L. Costanzo, P. Marino, G. Rubino, L. Rubino, M. Vitelli, “Modified TEODI

MPPT Technique: Theoretical Analysis and Experimental Validation in Uniform and Mismatching Conditions”, IEEE JOURNAL OF PHOTOVOLTAICS, VOL. 7, NO. 2, MARCH 2017, pp. 604-613, ISBN 2156-3381, DOI: 10.1109/JPHOTOV.2016.2634327.

P176) M. Balato, L. Costanzo, M. Vitelli, “Maximization of the extracted power in resonant

electromagnetic vibration harvesters applications employing bridge rectifiers”, SENSORS AND ACTUATORS A: PHYSICAL, ELSEVIER, Vol. 263, May 2017, pp. 63-75, ISBN 0924-4247, DOI: HTTP://DX.DOI.ORG/10.1016/J.SNA.2017.04.002.

P177) M. Balato, L. Costanzo, M. Vitelli, “Chapter 5 - DMPPT PV System: Modeling and Control

Techniques”, Advances in Renewable Energies and Power Technologies, edited by Imene Yahyaoui, Elsevier, 2018, Pages 163-205, ISBN 9780128129593, https://doi.org/10.1016/B978-0-12-812959-3.00005-8.

P178) M. Balato, L. Costanzo, A. Lo Schiavo, M. Vitelli: ”Optimization of both Perturb &

Observe and Open Circuit Voltage MPPT Techniques for Resonant Piezoelectric Vibration Harvesters feeding bridge rectifiers, Sensors and Actuators A: Physical, pp. 85-97, 2018, https://doi.org/10.1016/j.sna.2018.05.017, ISBN 0924-4247, ELSEVIER.

National Conferences P179) N. Femia, L.Egiziano, G. Lupò, V.Tucci, M. Vitelli: “Caratterizzazione e modellistica

elettrica di materiali organici compositi”, X Riunione annuale dei ricercatori di elettrotecnica, Padova, 16-18 giugno 1994.

P180) N. Femia, L.Egiziano, G. Lupò, V.Tucci, M. Vitelli: “Simulazione numerica e

caratterizzazione frattale di fenomeni di scarica nei dielettrici”, X Riunione annuale dei ricercatori di elettrotecnica, Padova, 16-18 giugno 1994.

P181) L.Egiziano, G. Lupò, C.Petrarca, V.Tucci, M. Vitelli: “Modelli di trasporto di carica in

materiali compositi ”, XI Riunione annuale dei ricercatori di elettrotecnica, Palermo 16-18 giugno 1995.

P182) L.Egiziano, G. Lupò, G.Miano, G. Spagnuolo, V.Tucci, M. Vitelli: “Studio e controllo del

campo elettrico in terminazioni di cavo coassiale”, XI Riunione annuale dei ricercatori di elettrotecnica, Palermo 16-18 giugno 1995.

P183) N. Femia, L.Egiziano, G. Lupò, C. Petrarca, V.Tucci, M. Vitelli: “Modellistica elettrica di

materiali organici compositi”, XII Riunione annuale dei ricercatori di elettrotecnica, Cagliari, 27-29 giugno 1996.

P184) G. Lupò, G. Miano, V.Tucci, M. Vitelli: “Approssimazione quasi stazionaria per il calcolo

del campo elettrico in terminazioni di cavo coassiale”, XII Riunione annuale dei ricercatori di elettrotecnica, Cagliari, 27-29 giugno 1996

P185) N. Femia, L.Egiziano, G. Lupò, C. Petrarca, V.Tucci, M. Vitelli: “Caratterizzazione di

isolamenti complessi”, XIII Riunione annuale dei ricercatori di elettrotecnica, Pisa, 19 – 21 giugno 1997.

P186) N. Femia, L.Egiziano, G. Lupò, C. Petrarca, G. Spagnuolo, V.Tucci, M. Vitelli: “Modelli

per la valutazione dei disturbi elettromagnetici generati da fenomeni di scarica intranube”, XIV Riunione annuale dei ricercatori di elettrotecnica, Reggio Calabria, 18-20 giugno 1998.

P187) N. Femia, L.Egiziano, G. Lupò, C. Petrarca, V.Tucci, M. Vitelli: “ Modellistica elettrica di

materiali compositi innovativi”, XIV Riunione annuale dei ricercatori di elettrotecnica, Reggio Calabria, 18-20 giugno 1998.

P188) N. Femia, L.Egiziano, G. Lupò, C. Petrarca, V.Tucci, M. Vitelli: “ Modelli di scariche

parziali diagnostiche su difetti artificiali e su componenti”, XIV Riunione annuale dei ricercatori di elettrotecnica, Reggio Calabria, 18-20 giugno 1998.

P189) L.Egiziano, C. Petrarca, V.Tucci, M. Vitelli:” Caratterizzazione elettrica di isolamenti

elettrici di motori asincroni per trazione alimentati da inverter”, XV Riunione annuale dei ricercatori di elettrotecnica, L’Aquila, 24-26 giugno 1999.

P190) L.Egiziano, G. Lupò, C. Petrarca, V.Tucci, M. Vitelli: “Analisi ed ottimizzazione delle

prestazioni di componenti in Alta Tensione”, XV Riunione annuale dei ricercatori di elettrotecnica, L’Aquila, 24-26 giugno 1999.

P191) L.Egiziano, G. Lupò, C. Petrarca, G.Spagnuolo, V.Tucci, M. Vitelli: “Analisi delle sollecitazioni elettriche nei motori asincroni per la trazione alimentati tramite inverter”, XVI Riunione annuale dei ricercatori di elettrotecnica, Udine, 15-18 giugno 2000.

P192) G. Lupò, C. Petrarca, M. Vitelli: “Analisi di segnali UWB di scariche parziali tramite

trasformata wavelet”, XVI Riunione annuale dei ricercatori di elettrotecnica, Udine, 15-18 giugno 2000.

P193) D. Cerbasi, L.Egiziano, C. Petrarca, V.Tucci, M. Vitelli: “Analisi delle prestazioni di

componenti anisotropi per il controllo del campo elettrico in giunti e terminazioni di cavi MT”, XVI Riunione annuale dei ricercatori di elettrotecnica, Udine, 15-18 giugno 2000.

P194) N. Femia, G. Spagnuolo, M. Vitelli: “Metodi per l'analisi delle commutazioni sincrone nei

convertitori switching ”, XVI Riunione annuale dei ricercatori di elettrotecnica, Udine, 15-18 giugno 2000.

P195) L.Egiziano, N.Femia, G.Spagnuolo, V.Tucci, M.Vitelli, M. Di Lorenzo del Casale:

“Proprietà invarianti delle celle di commutazione soft-switching”, XVII Riunione annuale dei ricercatori di elettrotecnica, Catania, 6-8 settembre 2001.

P196) L.Egiziano, N.Femia, G.Spagnuolo, V.Tucci, M.Vitelli, M.Di Lorenzo del Casale: “Calcolo

della soluzione di regime di convertitori switching”, XVII Riunione annuale dei ricercatori di elettrotecnica, Catania, 6-8 settembre 2001.

P197) L.Egiziano, G. Lupò, C. Petrarca, V.Tucci, M.Vitelli, M.Di Lorenzo del Casale: “Studio

della distribuzione di tensione nell’avvolgimento statorico di motori asincroni per trazione alimentati da inverter PWM”, XVII Riunione annuale dei ricercatori di elettrotecnica, Catania, 6-8 settembre 2001.

P198) R. Candela, P. Romano, C. Petrarca, M.Vitelli, M.Di Lorenzo del Casale: “Simulazione

numerica di scariche parziali nell’avvolgimento di statore di un motore asincrono alimentato da inverter”, XVII Riunione annuale dei ricercatori di elettrotecnica, Catania, 6-8 settembre 2001.

P199) M.Di Lorenzo, N. Femia, P. Lamberti, V.Mainardi, G. Spagnuolo, M. Vitelli: “Metodi per il

circuit tolerance design: monte-carlo”, XVIII Riunione annuale dei ricercatori di elettrotecnica, Messina, 27-29 giugno 2002.

P200) L. Egiziano, N. Femia, P. Lamberti, G. Spagnuolo, M. Vitelli: “Valutazione delle perdite

ohmiche in convertitori switching”, XVIII Riunione annuale dei ricercatori di elettrotecnica, Messina, 27-29 giugno 2002.

P201) N. Femia, P. Lamberti, V. Mainardi, G. Petrone, G. Spagnuolo, M. Vitelli: “Metodi per il

circuit tolerance design: aritmetica di intervallo”, XVIII Riunione annuale dei ricercatori di elettrotecnica, Messina, 27-29 giugno 2002.

P202) N. Femia, P. Lamberti, V. Mainardi, G. Petrone, G. Spagnuolo, M. Vitelli: “Metodi per il

circuit tolerance design: algoritmi genetici”, XVIII Riunione annuale dei ricercatori di elettrotecnica, Messina, 27-29 giugno 2002.

P203) L.Egiziano, B.De Vivo, N.Femia, P.Lamberti, V.Mainardi, G.Petrone, G.Spagnuolo, V.Tucci, M. Vitelli: “Analisi di tolleranza di sistemi non lineari”, XIX Riunione annuale dei ricercatori di elettrotecnica, Perugia, 19-21 giugno 2003.

P204) L.Egiziano, B.De Vivo, N.Femia, P.Lamberti, V.Mainardi, G.Petrone, G.Spagnuolo,

V.Tucci, M. Vitelli: “Sistemi distribuiti per la produzione dell’energia elettrica da fonti rinnovabili”, XIX Riunione annuale dei ricercatori di elettrotecnica, Perugia, 19-21 giugno 2003.

P205) L.Egiziano, B.De Vivo, N.Femia, P.Lamberti, V.Mainardi, G.Petrone, G.Spagnuolo,

V.Tucci, M. Vitelli: “Valutazione delle perdite ohmiche in induttori multistrato per alte frequenze”, XIX Riunione annuale dei ricercatori di elettrotecnica, Perugia, 19-21 giugno 2003.

P206) L. Egiziano, P. Lamberti, V. Mainardi, G. Spagnuolo, V. Tucci, M. Vitelli: “Resistenza

parassita di componenti magnetici in regime deformato”, XX Riunione annuale dei ricercatori di elettrotecnica, Salerno, 16-19 giugno 2004.

P207) N.Femia, V. Mainardi, G. Petrone, G. Spagnuolo, M. Vitelli: “Ottimizzazione del Maximum

Power Point Tracking in Convertitori Switching per applicazioni fotovoltaiche”, XX Riunione annuale dei ricercatori di elettrotecnica, Salerno, 16-19 giugno 2004.

P208) L. Egiziano, N. Femia, G. Lisi, G. Petrone, G. Spagnuolo, M. Vitelli: “Progettazione e

validazione sperimentale di circuiti elettronici di potenza per applicazioni fotovoltaiche” XXI Riunione annuale dei ricercatori di elettrotecnica, Roma, 16-19 giugno 2005.

P209) L. Egiziano, N. Femia, M. Fortunato, A. Giustiniani, G. Petrone, G. Spagnuolo, M. Vitelli:

“Analisi, progetto e ottimizzazione di sistemi distribuiti per la produzione di energia elettrica da fonti rinnovabili”, XXII Riunione annuale dei ricercatori di elettrotecnica, Torino, 14-17 giugno 2006.

P210) L. Egiziano, B. De Vivo, G. Lupò, C. Petrarca , V. Tucci, M. Vitelli: “Determinazione della

tensione e della corrente di cuscinetto in motori asincroni da trazione alimentati tramite inverter”, XXII Riunione annuale dei ricercatori di elettrotecnica, Torino, 14-17 giugno 2006.

P211) L. Egiziano, A. Giustiniani, G. Petrone, G. Spagnuolo, M. Vitelli: “Controllo adattativo di

fuel cell di tipo PEM”, XXIII Riunione annuale dei ricercatori di elettrotecnica, Firenze, 28-30 giugno 2007.

P212) L.Egiziano, N.Femia, M.Fortunato, A.Giustiniani, G.Petrone, G.Spagnuolo, M.Vitelli

“Sviluppo di inverter grid-connected single-stage per la conversione dell’energia a fonti rinnovabili”, XXIII Riunione annuale dei ricercatori di elettrotecnica, Firenze, 28-30 giugno 2007.

P213) L.Egiziano, M.Fortunato, A.Giustiniani, G.Petrone, G.Spagnuolo, M.Vitelli: “Sviluppo di un

prototipo di veicolo ibrido solare”, XXIII Riunione annuale dei ricercatori di elettrotecnica, Firenze, 28-30 giugno 2007.

P214) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “Analisi, progetto e ottimizzazione di

sistemi distribuiti per la produzione di energia elettrica da fonti rinnovabili”, Giornate Scientifiche d'Ateneo, Aversa, luglio 2007.

P215) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “Convertitori DC−DC per applicazioni

fotovoltaiche con distributed maximum power point tracking”, XXIV Riunione annuale dei ricercatori di elettrotecnica, Pavia, 19-21 giugno 2008.

P216) L. Egiziano, N. Femia, M. Fortunato, A. Giustiniani, G. Petrone, G. Spagnuolo, M. Vitelli:

“Sviluppo di convertitori di pannello ad elevata affiabilità per la produzione di energia elettrica da sorgente fotovolatica”, XXIV Riunione annuale dei ricercatori di elettrotecnica, Pavia, 19-21 giugno 2008.

P217) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “Convertitori DC−DC per applicazioni

fotovoltaiche con distributed maximum power point tracking”, Giornate Scientifiche d'Ateneo, Aversa, luglio 2008.

P218) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “Analisi e sintesi di sistemi fotovoltaici con

Distributed Maximum Power Point Tracking”, Giornate Scientifiche d'Ateneo, Aversa, luglio 2009.

P219) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “Analisi e sintesi di sistemi fotovoltaici con

Distributed Maximum Power Point Tracking”, XXV Riunione annuale dei ricercatori di elettrotecnica, Lecce, 17-19 giugno 2009.

P220) N. Femia, G. Petrone, G. Spagnuolo, M. Vitelli: “Celle a combustibile ad elettrolita

polimerico”, XXV Riunione annuale dei ricercatori di elettrotecnica, Lecce, 17-19 giugno z2009.

P221) L.Egiziano, N.Femia, G.Petrone, G.Spagnuolo, M.Vitelli, E.Mamarelis: “Sviluppo di

convertitori ad elevate prestazioni per il maximum power point tracking distribuito (DMPPT)”, XXVI Riunione annuale dei ricercatori di elettrotecnica, Napoli, 9-11 giugno 2010.

P222) N. Femia, E. Mamarelis, G. Petrone, G. Spagnuolo, M. Vitelli:” Maximum Power Point

Tracking con controllo Sliding Mode”, XXVII Riunione annuale dei ricercatori di elettrotecnica, Bologna, 15-17 giugno 2011.

P223) L. Egiziano, N. Femia, E. Mamarelis, G. Petrone, G. Spagnuolo, M. Vitelli:” Modelli, topologie circuitali e tecniche di controllo per il maximum power point tracking distribuito (DMPPT) ”, XXVIII Riunione annuale dei ricercatori di elettrotecnica, Taormina, giugno 2012.

NATIONAL JOURNALS P224) M. Vitelli: “Sistemi fotovoltaici: aspetti tecnici, economici e normativi”, Ingegneri Oggi,

periodico dell’Ordine degli Ingegneri della Provincia di Caserta, pp. 16-20, N. 3, giugno 2007.

BOOKS P225) N.Femia, G.Petrone, G.Spagnuolo, M.Vitelli: Power Electronics and Control Techniques for

Maximum Energy Harvesting in Photovoltaic Systems, 2012, CRC Press, Taylor & Francis group, ISBN: 978-1-4665-0690-9.

PATENTS [1] Brevetto nazionale (2005): Dispositivo invertitore a singolo stadio, e relativo metodo di controllo, per convertitori di potenza da sorgenti di energia, in particolare sorgenti fotovoltaiche; inventori: Luigi EGIZIANO, Nicola FEMIA, Domenico GRANOZIO, Giovanni PETRONE, Giovanni SPAGNUOLO, Massimo VITELLI. SA2005A/000014. [2] Brevetto internazionale (2005): Single stage inverter device, and related controlling method, for converters of power from energy sources, in particular photovoltaic sources, PCT No. PCT/IT2005/000747, deposito 20 Dicembre 2005. Inventori: Luigi EGIZIANO, Nicola FEMIA, Domenico GRANOZIO, Giovanni PETRONE, Giovanni SPAGNUOLO, Massimo VITELLI. (WO/2007/007360 http://www.wipo.int/pctdb/en/wo.jsp?wo=2007007360) [3] Brevetto internazionale (2005): A system for producing electric power from renewable sources and a control method thereof. (Un sistema di produzione di energia elettrica da fonti rinnovabili ed un metodo per il suo controllo). Il brevetto è stato sviluppato nell’ambito di una convenzione di ricerca tra la multinazionale Magnetek ed il DIIIE dell’Università di Salerno; inventori: Antonio CANOVA, Filippo DE ROSA, Nicola FEMIA, Dario MACERINI, Danio NOCENTINI, Giovanni PETRONE, Antonio SIRIANNI, Giovanni SPAGNUOLO, Massimo VITELLI. PCT No. PCT/IT2005/000757, depositata in data 22 Dicembre 2005. (WO/2007/072517 http://www.wipo.int/pctdb/en/wo.jsp?wo=2007072517) [4] Brevetto nazionale (2006): Metodo e dispositivo per il funzionamento di sorgenti energetiche al punto di massima potenza; inventori: FEMIA N., DEROSA F., SIRIANNI A., PETRONE G., EGIZIANO L.,SPAGNUOLO G., VITELLI M. (brevetto SA 2006A/000016 del 7.6.2006, concessione licenza d'uso alla Società Matrix s.r.l. con contratto stipulato in data 27.06.2006). (WO/2007/141823) METHOD AND DEVICE FOR CONTROLLING THE OPERATION OP POWER SOURCES AT THE POINT OF MAXIMUM POWER (http://www.wipo.int/pctdb/en/wo.jsp?WO=2007141823) [5] Brevetto nazionale (2009): Apparato controllore ad inseguimento del punto di massima potenza di un sistema di generazione di potenza elettrica basato su sorgenti fotovoltaiche, metodo di controllo e relativo sistema di generazione di potenza elettrica (Teodi). Inventori: L. EGIZIANO; N. FEMIA; SPAGNUOLO G.; G. PETRONE; M. VITELLI (2009). RM2009000193 Università di Salerno. [6] Brevetto nazionale (2009): Metodo di controllo di un sistema di generazione di potenza elettrica basato su sorgenti di energia, in particolare sorgenti di energia rinnovabile, e relativo dispositivo controllore. Inventori: LUIGI EGIZIANO; FEMIA N.; GIOVANNI PETRONE; GIOVANNI SPAGNUOLO; MASSIMO VITELLI. SA2009A000004 Universita degli Studi di Salerno [7] Brevetto nazionale (2010): Metodo e dispositivo per la massimizzazione della potenza elettrica prodotta da un generatore, in particolare un generatore basato su una fonte energetica rinnovabile. Inventori: GIOVANNI PETRONE; ENRICO BIANCONI; GIOVANNI SPAGNUOLO; NICOLA FEMIA; MASSIMO VITELLI; CALVENTE CALVO FRANCISCO JAVIER; GIRAL CASTILLON ROBERTO; RAMOS PAJA CARLOS ANDRES. N. 0001401606, Bitron spa. [8] Brevetto USA (2014) Patent No.: US 8,829,721 B2: CONTROLLER APPARATUS WITH MAXIMUM POWER POINT TRACKING FOR CONTROLLING AN ELECTRIC POWER GENERATION SYSTEM BASED ON PHOTOVOLTAIC SOURCES, CONTROLLING METHOD

AND RELATED ELECTRIC POWER GENERATION SYSTEM, Inventori: L. EGIZIANO; N. FEMIA; SPAGNUOLO G.; G. PETRONE; M. VITELLI (2009). Università di Salerno. [9] Brevetto nazionale (2013): “METODO PER LA DECIMAZIONE DEI CAMPIONI NECESSARI ALL’IDENTIFICAZIONE DI UNA CURVA CARATTERISTICA DI ALMENO UN MODULO DI EROGAZIONE DI ENERGIA ELETTRICA E PROGRAMMA PER ELABORATORE ASSOCIATO”. Inventori: PIETRO LUIGI CAROTENUTO; LUIGI CIRILLO; CARLO CULLINO; PATRIZIO MANGANIELLO; GIOVANNI PETRONE; GIOVANNI SPAGNUOLO; MASSIMO VITELLI; N. TO2013A000717, Bitron spa. [10] Brevetto nazionale (2013): “METODO PER VALUTARE LA NECESSITÀ DI ESEGUIRE UNA FASE DI RICONFIGURAZIONE DI DUE O PIÙ PANNELLI FOTOVOLTAICI”. Inventori: PIETRO LUIGI CAROTENUTO; LUIGI CIRILLO; CARLO CULLINO; PATRIZIO MANGANIELLO; GIOVANNI PETRONE; GIOVANNI SPAGNUOLO; MASSIMO VITELLI; N. TO2013A000718, Bitron spa.

[11] M. BALATO, L. COSTANZO, M. VITELLI, “SPRING-MASS-DAMPER EMULATION-BASED MECHANICAL TUNING DEVICE AND TECHNIQUE (SMDEDT)”, SUBMITTED.


Recommended