CURRICULUM VITAE | 2018

PERSONAL INFORMATION

1. ACADEMIC QUALIFICATIONS

2011 Doctor of Philosophy of Engineering (Ph.D) in Mechanics & Energy, Graduate School of Systems and Information

Engineering, University of Tsukuba, Japan

Thesis title: “Study on Effect of Bond Thickness upon Adhesive Strength and Fracture Characteristics of Brittle Epoxy

Adhesively Bonded Dissimilar Joint”

2008 Master of Engineering (MEng) in Mechanics & Energy, Graduate School of Systems and Information Engineering,

University of Tsukuba, Japan

Thesis title: “Three-Point Bending Fracture Test of Epoxy Adhesive-bonded Dissimilar Materials”

2006 Bachelor of Engineering (BEng) in Engineering System, Faculty of Engineering System, University of Tsukuba, Japan

2. PROFESSIONAL MEMBERSHIP

2017 Member, International Association of Engineers, Hong Kong (123217)

2014 Chartered Engineer from Engineering Council, United Kingdom (619007)

2014 Member, Institution of Mechanical Engineers (IMechE), United Kingdom (80233906)

2014 Member, Society of Adhesion & Adhesives (SAA), United Kingdom (269275)

2013 Grad. Eng. (Mechanical System), Board of Engineers Malaysia (BEM), (83572A)

3. ADMINISTRATIVE POSTS

Mac 2017 – present Head of Design & Manufacturing Division, School of Mechatronic Engineering

Aug 2011 – Feb 2017 Chairperson for Mechanical Engineering Programme (RK08), UniMAP

4. RESEARCH GRANTS

Head Researcher (Total RM 361,802)

1. Project Title: Fatigue Crack Behavior on the Wheel and Railway for High Speed Rail Corridors in Malaysia

Grant: Fundamental research grant scheme (FRGS), RM 91,700, 01/11/2015 - 31/10/2017 (completed)

Name Dr. Mohd Afendi Bin Rojan CEng MIMechE

Address (Home)

Address (Office)

26, Jalan Tiga, Taman Pauh Indah, 02600 Arau, Perlis

School of Mechatronic Engineering, Universiti Malaysia Perlis,

Pauh Putra Campus, 02600 Arau, Perlis, Malaysia

Tel No. +604-9885162 (OFFICE); +6013-4003531 (H/P)

Email

Website

Date of Birth

IC No.

Expertise:

afendirojan@unimap.edu.my

www.afendirojan.wordpress.com

9 July 1981

810709-03-5003

Fracture mechanics, adhesive joint, joining technique, finite

element analysis, composite materials, polymer, friction stir

welding, non-destructive testing, outcome based education

CURRICULUM VITAE | 2018

2. Project Title: Prototype of Lightweight UniART Car Chassis Structure

Grant: Universiti Malaysia Perlis (UniMAP), RM 15,000, 01/08/2015-31/07/2016 (completed)

3. Project Title: Investigation on Mechanical Properties and Fracture Behaviour of Friction Stir Welded Aluminium Alloy

Grant: Fundamental research grant scheme (FRGS), RM 125,000, 01/07/2014-30/06/2016 (completed)

4. Project Title: Effect of Adhesive Thickness on Strength of Adhesively Bonded T-Joint In Urea Granulator

Grant: Research collaboration effort (RACE), RM 74,800, 10/01/2014-09/01/2016 (completed)

5. Project Title: Durability and Microwave Non-destructive Evaluations of Composite/Aluminum Hybrid Joints for

Lightweight Automotive Structures

Grant: Research acculturation grant scheme (RAGS), RM 47,302, 07/12/2012-06/12/2014 (completed)

6. Project Title: Fatigue Strength of Ductile Adhesive Single Lap Joint in Chassis of Racing Sports Car

Grant: Universiti Malaysia Perlis (UniMAP), RM 8,000, 13/02/2012-12//02/2013 (completed)

Co-Researcher (RM 1,012,093)

1. Project Title: Theoretical Study of Stress Diversion Produced by Kerf for Crack Arrest Analysis in Fracture Mechanics

Grant: Fundamental research grant scheme (FRGS), RM 79,500, Aug 2017-July 2019 (on-going)

2. Project Title: Investigate the Influence of Weld Bead Path in Butt Joint Design for Dissimilar Metal Welding

Grant: Research acculturation grant scheme (RAGS), RM 77,683, 30/09/2015-31/08/2017 (completed)

3. Project Title: Structural Analysis on an Improved Design of UniART’s Suspension System

Grant: Universiti Malaysia Perlis (UniMAP), RM 15,000, 01/08/2015-31/07/2016 (completed)

4. Project Title: Elucidating the interaction mechanisms between the E-glass-cellulosic Pennisetum purpureum fibre and

matrix interface in hybrid polymer composites

Grant: Fundamental research grant scheme (FRGS), RM 86,000, 01/11/2015-31/10/2017 (completed)

5. Project Title: Characterisation of a new phase change thermal storage system integrated with matrix composite

Grant: Fundamental research grant scheme (FRGS), RM 139,000, 11/09/2015-28/02/2018 (on-going)

6. Project Title: Prototype of Automated Cyclic/Static Multi-axial Pressure Testing Rig

Grant: Prototype research grant scheme (PRGS), RM 145,000, 01/09/2014-31/08/2016 (completed)

7. Project Title: Dissimilar metal joining of Aluminum and Magnesium based alloy by gas metal arc

Grant: Fundamental research grant scheme (FRGS), RM 135,000, 07/06/2014-31/10/2017 (completed)

8. Project Title: Study of Electromagnetic Wave Absorption in Recycled Glass Doped with Conductive Elements

Grant: Research acculturation grant scheme (RAGS), RM 56,300, 22/08/2013-21/08/2015 (completed)

9. Project Title: A Fundamental Study On An Optimal Design Of Phase Change Material (PCM) Encapsulated In Spheres As

A Thermal Energy Storage (TES) System

Grant: Fundamental research grant scheme (FRGS), RM 46,500, 22/08/2013-21/08/2015 (completed)

10. Project Title: Characterization of orthopedic implant self-loosening and anti-loosening screw failure mechanism under

mixed-mode loading

Grant: Fundamental research grant scheme (FRGS), RM 139,000, 12/11/2014-11/11/2017 (completed)

11. Project Title: Characterization of Overlapping Stress Shielding and Stress Amplification Effect on Fracture Behavior of

Interacting Macro-Microcracks

Grant: Fundamental research grant scheme (FRGS), RM 93,110, 05/12/2013-04/12/2016 (completed)

12. Project Title: Performance envelope for glass fibre reinforced epoxy (GRE) composite pipes under multiaxial

CURRICULUM VITAE | 2018

loadings

Grant: MOSTI Sciencefund, RM 226,500, Feb 2012-Feb 2015 (completed)

5. PUBLICATIONS

No. of Papers, H-Index and Citations**

No. of Papers H-Index No. of citations

Scopus Indexed 97 11 241

ISI Indexed Journal Papers and Cumulative Impact Factor (CIF)

Q1 Q2 Q3 Q4 Total CIF

11 (2*) - 2 1 14 (2*) 43.06

* First /corresponding author, **Updated 12 February 2018

Book

1. Mohd Afendi, Effect of Bond Thickness, LAP GmbH & Co. KG (ISBN 978-3-8465-1631-7), 2012.

Book in Chapter

1. Wan Sulong W.M.S., Rojan M.A.*, Mazlee M.N. (2018) Influence of Tool Plunge Depth on the Joint Strength and

Hardness of Friction Stir Welded AA6061 and Mild Steel. In: Öchsner A. (eds) Engineering Applications for New

Materials and Technologies. Advanced Structured Materials, vol 85. Springer, Cham.

2. Wan Sulong W.M.S., Rojan M.A.*, Mazlee M.N. (2018) Tensile and Hardness Analysis of Dissimilar Friction Stir Welding

Between AA6061 with AA5083 and Mild Steel. In: Öchsner A. (eds) Engineering Applications for New Materials and

Technologies. Advanced Structured Materials, vol 85. Springer, Cham.

3. Ismail, A., Awang, M., Samsudin, S.H., Rojan, M.A.*, Jasri, M.A.H.M., The hardness variation due to secondary heating in

friction stir welding of small diameter aluminium alloy 6063 pipe, (2016) Advanced Structured Materials, 61, pp. 87-94.

4. Jasri, M.A.H.M., Afendi Rojan, M.*, Azman, M., The material hardness and tensile strength of AA5083 aluminum alloy

friction stir welding lap joint with conventional milling machine, (2016) Advanced Structured Materials, 61, pp. 95-103.

ISI Indexed Journals (CIF 43.06)

2017 1. Maslinda, A.B., Abdul Majid, M.S., Ridzuan, M.J.M., Afendi, M., Gibson, A.G., Effect of water absorption on the

mechanical properties of hybrid interwoven cellulosic-cellulosic fibre reinforced epoxy composites, (2017)

Composite Structures, 167, pp. 227-237. (ISI Q1, IF: 3.858)

2016 2. Ahmad, H., Majid, M.S.A., Rojan, M.A., Mat, F., Dan-Mallam, Y., Hydrothermal effects on the burst strength of

impacted glass fiber/epoxy composite pipes, (2016) Materialpruefung/Materials Testing, 58 (4), pp. 333-336. (ISI

Q4, IF: 0.418)

3. Ridzuan, M.J.M., Majid, M.S.A., Afendi, M., Mazlee, M.N., Gibson, A.G., Thermal behaviour and dynamic

mechanical analysis of Pennisetum purpureum/glass-reinforced epoxy hybrid composites, (2016) Composite

CURRICULUM VITAE | 2018

Structures, 152, pp. 850-859. (ISI Q1, IF: 3.858)

4. Krishnan, P., Abdul Majid, M.S., Afendi, M., Yaacob, S., Gibson, A.G., Effects of hydrothermal ageing on the

behaviour of composite tubes under multiaxial stress ratios, (2016) Composite Structures, 148, pp. 1-11. (ISI Q1,

IF: 3.858)

5. Haameem J.A., M., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Hilmi, E.A., Fahmi, I., Gibson, A.G., Effects of

water absorption on Napier grass fibre/polyester composites, (2016) Composite Structures, 144, pp. 138-146. (ISI

Q1, IF: 3.858)

6. Ridzuan, M.J.M., Abdul Majid, M.S., Afendi, M., Azduwin, K., Amin, N.A.M., Zahri, J.M., Gibson, A.G., Moisture

absorption and mechanical degradation of hybrid Pennisetum purpureum/glass-epoxy composites, (2016)

Composite Structures, 141, pp. 110-116. (ISI Q1, IF: 3.858)

7. Haameem J.A., M., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Fahmi, I., Gibson, A.G., Mechanical properties

of Napier grass fibre/polyester composites, (2016) Composite Structures, 136, pp. 1-10. (ISI Q1, IF: 3.858)

8. Ridzuan, M.J.M., Abdul Majid, M.S., Afendi, M., Aqmariah Kanafiah, S.N., Zahri, J.M., Gibson, A.G.,

Characterisation of natural cellulosic fibre from Pennisetum purpureum stem as potential reinforcement of

polymer composites, (2016) Materials and Design, 89, pp. 839-847. (ISI Q1, IF: 4.364)

9. Hawa, A., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Amin, N.A.M., Mat, F., Gibson, A.G., Burst strength and

impact behaviour of hydrothermally aged glass fibre/epoxy composite pipes, (2016) Materials and Design, 89,

pp. 455-464. (ISI Q1, IF: 4.364)

2015 10. Abdul Majid, M.S., Afendi, M., Daud, R., Gibson, A.G., Assaleh, T.A., Hale, J.M., Hekman, M., Acoustic emission

monitoring of multiaxial ultimate elastic wall stress tests of glass fibre-reinforced epoxy composite pipes, (2015)

Advanced Composite Materials, 24 (1), pp. 1-16. (ISI Q3, IF: 1.407)

11. Krishnan, P., Abdul Majid, M.S., Afendi, M., Gibson, A.G., Marzuki, H.F.A., Effects of winding angle on the

behaviour of glass/epoxy pipes under multiaxial cyclic loading, (2015) Materials and Design, 88, pp. 196-206. (ISI

Q1, IF: 4.364)

2014 12. M. S. Abdul Majid, A. G. Gibson, M. Hekman, M. Afendi and N. A. M. Amin, Strain response and damage

modelling of glass/epoxy pipes under various stress ratios. Plastics Rubber and Composites. 43(9), pp. 290-299,

2014. (ISI Q3, IF: 0.570)

2013 13. Mohd Afendi*, M.S. Abdul Majid, Ruslizam Daud, A. Abdul Rahman and Tokuo Teramoto, Strength Prediction

and Reliability of Brittle Epoxy Adhesively Bonded Dissimilar Joint, International Journal of Adhesion and

Adhesives, 45, pp. 21-31, 2013. (ISI Q1, IF: 2.211)

2011 14. Mohd Afendi*, Tokuo Teramoto and Hairul Bin Bakri, Strength Prediction of Epoxy Adhesively Bonded Scarf

Joints of Dissimilar Adherends, International Journal of Adhesion and Adhesives, 31, pp. 402-411, 2011. (ISI Q1, IF:

2.211)

Scopus Indexed Journals

2017 1. Ridzuan, M.J.M., Majid, M.S.A., Afendi, M., Firdaus, A.Z.A., Azduwin, K., Effect of elevated temperature on the

tensile strength of Napier/glass-epoxy hybrid reinforced composites (2017) AIP Conference Proceedings, 1902,

CURRICULUM VITAE | 2018

art. no. 020062,.

2. Zikri, M.Z., Ridzuan, M.J.M., Abdul Majid, M.S., Afendi, M., Basaruddin, K.S., Effects of fibre loading and

moisture absorption on the tensile properties of hybrid Napier/glass/epoxy composites (2017) Journal of Physics:

Conference Series, 908 (1), art. no. 012014, .

3. Hazman, M.F., Basaruddin, K.S., Kamarrudin, N.S., Abdul Majid, M.S., Afendi, M., Effective elastic constants of

corrugated core sandwich plate microstructure considering imperfection in adhesive bonding (2017) Journal of

Physics: Conference Series, 908 (1), art. no. 012031, .

4. Lim, K.H., Majid, M.S.A., Ridzuan, M.J.M., Basaruddin, K.S., Afendi, M., Effect of nano-clay fillers on mechanical

and morphological properties of Napier/epoxy Composites (2017) Journal of Physics: Conference Series, 908 (1),

art. no. 012010, .

5. Syafiq, W.M., Afendi, M.*, Daud, R., Mazlee, M.N., Abdul Majid, M.S., Lee, Y.S. Mechanical properties of friction

stir welded butt joint of steel/aluminium alloys: Effect of tool geometry (2017) Journal of Physics: Conference

Series, 908 (1), art. no. 012061, .

6. Gurubaran, P., Afendi, M.*, Nur Fareisha, M.A., Abdul Majid, M.S., Haftirman, I., Rahman, M.T.A. Fatigue life

investigation of UIC 54 rail profile for high speed rail (2017) Journal of Physics: Conference Series, 908 (1), art.

no. 012026, .

7. Izzawati, B., Daud, R., Afendi, M., Abdul Majid, M.S., Zain, N.A.M., Bajuri, Y. Stress analysis of implant-bone

fixation at different fracture angle (2017) Journal of Physics: Conference Series, 908 (1), art. no. 012019, .

8. Fatinah, T.S., Abdul Majid, M.S., Ridzuan, M.J.M., Hong, T.W., Amin, N.A.M., Afendi, M., Tensile properties of

compressed moulded Napier/glass fibre reinforced epoxy composites(2017) Journal of Physics: Conference

Series, 908 (1), art. no. 012013, .

9. Samshuri, S.F., Daud, R., Rojan, M.A., Mat, F., Basaruddin, K.S., Hassan, R., Energy release rate analysis on the

interface cracks of enamel-cement-bracket fracture using virtual crack closure technique (2017) Journal of

Physics: Conference Series, 908 (1), art. no. 012016, .

10. Mariam, M., Afendi, M.*, Majid, M.S.A., The Effect of Dry and Wet Condition on the Mechanical Properties of

Hybrid Single Lap (2017) IOP Conference Series: Materials Science and Engineering, 238 (1), art. no. 012005, .

11. Izzawati, B., Daud, R., Afendi, M., Majid, M.S.A., Zain, N.A.M., Convergence and stress analysis of the

homogeneous structure of human femur bone during standing up condition (2017) AIP Conference Proceedings,

1885, art. no. 020190, .

12. Bahri, N.F., Afendi, M.*, Razlan, Z.M., Nor, A., Baharuddin, S.A., Experimental investigation on the failure of

T-joints at elevated temperature under unaxial loading (2017) AIP Conference Proceedings, 1885, art. no.

020084.

13. Samshuri, S.F., Daud, R., Rojan, M.A., Basaruddin, K.S., Abdullah, A.B., Ariffin, A.K., Convergence study of global

meshing on enamel-cement-bracket finite element model (2017) AIP Conference Proceedings, 1885, art. no.

020167, .

14. Shahriman, A.B., Mohamad Syafiq, A.K., Hashim, M.S.M., Razlan, Z.M., Khairunizam, W.A.N., Hazry, D., Afendi,

M., Daud, R., Rahman, M.D.T.A., Cheng, E.M., Zaaba, S.K., Air flow quality analysis of modenas engine exhaust

system (2017) AIP Conference Proceedings, 1885, art. no. 020120, .

15. Rina, Z.S., Amin, N.A.M., Hashim, M.S.M., Majid, M.S.A., Rojan, M.A., Zaman, I., Development of a

Microcontroller-based Battery Charge Controller for an Off-grid Photovoltaic System (2017) IOP Conference

CURRICULUM VITAE | 2018

Series: Materials Science and Engineering, 226 (1), art. no. 012138, .

16. Maslinda, A.B., Abdul Majid, M.S., Ridzuan, M.J.M., Afendi, M., Gibson, A.G., Effect of water absorption on the

mechanical properties of hybrid interwoven cellulosic-cellulosic fibre reinforced epoxy composites (2017)

Composite Structures, 167, pp. 227-237.

17. Baharuddin, S.A., Cheng, E.M., Lee, K.Y., Zaaba, S.K., Syahirah, K.N., Abbas, Z., Nasir, N.F.M., Afendi, M., Zakaria,

Z., Development of five port reflectometer for reflection based sensing system (2017) AIP Conference

Proceedings, 1808, art. no. 020011, .

18. Pang, O.E., Daud, R., Amin, N.A.M., Rojan, M.A., Majid, M.S.A., Finite element modelling of thin intermetallic

compound layer fractures (2017) Journal of Mechanical Engineering and Sciences, 11 (1), pp. 2478-2487.

19. Basaruddin, K.S., Daud, R., Abdul Majid, M.S., Afendi, M., Ibrahim, I., Experimental and finite element analysis on

ratchetting behaviour of glass fibre reinforced epoxy composites under cyclic loading (2017) International

Journal of Mechanical and Mechatronics Engineering, 17 (1), pp. 38-46.

20. Mariam, M., Afendi, M.*, Majid, M.S.A., Environmental effect on short-beam composite under three-point

bending test (2017) Key Engineering Materials, 740 KEM, pp. 17-24.

21. Syafiq, W.M., Afendi, M.*, Daud, R., Mazlee, M.N., Jaafar, N.A., Variation of tool offsets and its influence on

mechanical properties of dissimilar friction stir welding of aluminum alloy 6061 and S235JR mild steel by

conventional belting milling machine (2017) Lecture Notes in Mechanical Engineering, pp. 37-47.

22. Balasena, G., Bakar, S.A., Zakaria, Z., Ikeura, R., Razlan, Z.M., Hazry, D., Ahmad, W.K.W., Meng, C.E., Rojan, M.A.,

Study of eddy current density distribution in a contactless breast cancer detection mechanism using magnetic

induction spectroscopy (2017) Lecture Notes in Electrical Engineering, 398, pp. 89-94.

23. Ooi, E.P., Daud, R., Amin, N.A.M., Mat, F., Sulaiman, M.H., Abdul Majid, M.S., Afendi, M., Ariffin, A.K., Fracture

behavior of intermetallic compound (IMC) of solder joints based on finite elements’ simulation result (2017)

Lecture Notes in Mechanical Engineering, pp. 49-57.

2016 24. Faizi, M.K., Shahriman, A.B., Majid, M.S.A., Shamsul, B.M.T., Ng, Y.G., Basah, S.N., Cheng, E.M., Afendi, M.,

Zuradzman, M.R., Wan, K., Hazry, D., An overview of the Oil Palm Empty Fruit Bunch (OPEFB) potential as

reinforcing fibre in polymer composite for energy absorption applications (2016) MATEC Web of Conferences,

90, art. no. 01064, .

25. Gurubaran, P., Afendi, M.*, Kanasan, N., Haftirman, I., Tasyrif, M., Basaruddin, K.S., Mixed mode loading fracture

toughness of Arcan adhesive joint: Effect of surface roughness (2016) AIP Conference Proceedings, 1775, art. no.

030038, .

26. Ikram, I.M., Ismail, A., Zakaria, A., Awang, M., Rojan, M.A.*, Hamid, D.A., Makhtar, M.F., Said, M.T.S.M., A

preliminary experimental study of underwater Friction Stir Welding AA5083 plate butt joint (2016) Journal of

Environmental Science and Technology, 9 (6), pp. 462-466.

27. Makhtar, M.F., Ismail, A., Suffian, M.H.M., Rojan, M.A.*, Hamid, D.A., Ikram, I.M., Said, M.T.S.M., Bashah, N.A.K.A

preliminary study of fixtureless shipbuilding practice (2016) Journal of Environmental Science and Technology, 9

(6), pp. 467-471.

28. Ridzuan, M.J.M., Majid, M.S.A., Afendi, M., Mazlee, M.N., Gibson, A.G.Thermal behaviour and dynamic

mechanical analysis of Pennisetum purpureum/glass-reinforced epoxy hybrid composites (2016) Composite

Structures, 152, pp. 850-859.

CURRICULUM VITAE | 2018

29. Cheng, E.M., Abbas, Z., Abdul Malek, M., Lee, K.Y., You, K.Y., Khor, S.F., Afendi, M., Geometrical optics based

path loss model for furnished indoor environment (2016) Applied Computational Electromagnetics Society

Journal, 31 (9), pp. 1125-1134.

30. Azam, N., Afendi, M.*, Effect of Wire-EDM cutting parameters on material removal rate of titanium alloy

(Ti6Al4V) (2016) AIP Conference Proceedings, 1756, art. no. 060001, .

31. Fahmi, I., Majid, M.S.A., Afendi, M., Haslan, M., Helmi, E.A., Haameem, J.A.M., Impact behaviour of

Napier/polyester composites under different energy levels (2016) AIP Conference Proceedings, 1756, art. no.

040003, .

32. Krishnan, P., Abdul Majid, M.S., Afendi, M., Yaacob, S., Gibson, A.G., Effects of hydrothermal ageing on the

behaviour of composite tubes under multiaxial stress ratios (2016) Composite Structures, 148, pp. 1-11.

33. Haameem, J.A.M., Abdul Majid, M.S., Afendi, M., Haslan, M., Fahmi, I., Alkaline treatment and thermal

properties of napier grass fibres (2016) International Journal of Automotive and Mechanical Engineering, 13 (1),

pp. 3238-3247.

34. Haameem J.A., M., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Hilmi, E.A., Fahmi, I., Gibson, A.G., Effects of

water absorption on Napier grass fibre/polyester composites (2016) Composite Structures, 144, pp. 138-146.

35. Ridzuan, M.J.M., Abdul Majid, M.S., Afendi, M., Azduwin, K., Amin, N.A.M., Zahri, J.M., Gibson, A.G., Moisture

absorption and mechanical degradation of hybrid Pennisetum purpureum/glass-epoxy composites (2016)

Composite Structures, 141, pp. 110-116.

36. Syafiq, W.M., Rojan, M.A.*, Abdul Majid, M.S., Jaafar, N.A., Fracture toughness of Friction Stir Welded aluminium

alloy (2016) ARPN Journal of Engineering and Applied Sciences, 11 (5), pp. 3102-3108.

37. Syafiq, W.M., Rojan, M.A.*, Abdul Majid, M.S., Jaafar, N.A., Fracture toughness of Friction Stir Welded aluminium

alloy (2016) ARPN Journal of Engineering and Applied Sciences, 11 (5), pp. 3571-3577.

38. Haameem J.A., M., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Fahmi, I., Gibson, A.G., Mechanical properties

of Napier grass fibre/polyester composites(2016) Composite Structures, 136, pp. 1-10.

39. Ridzuan, M.J.M., Abdul Majid, M.S., Afendi, M., Aqmariah Kanafiah, S.N., Zahri, J.M., Gibson, A.G.,

Characterisation of natural cellulosic fibre from Pennisetum purpureum stem as potential reinforcement of

polymer composites (2016) Materials and Design, 89, pp. 839-847.

40. Hawa, A., Abdul Majid, M.S., Afendi, M., Marzuki, H.F.A., Amin, N.A.M., Mat, F., Gibson, A.G., Burst strength and

impact behaviour of hydrothermally aged glass fibre/epoxy composite pipes (2016) Materials and Design, 89,

pp. 455-464.

41. Ismail, A., Awang, M., Rojan, M.A.*, Samsudin, S.H., The characteristic of temperature curves for friction stir

welding of aluminium alloy 6063-T6 pipe during tool plunging stage (2016) ARPN Journal of Engineering and

Applied Sciences, 11 (1), pp. 277-280.

42. Majid, M., Afendi, M.*, Lieh, W.W., Hafizan, K., Strength of composites hybrid joint (2016) ARPN Journal of

Engineering and Applied Sciences, 11 (1), pp. 216-221.

43. Ismail, A., Awang, M., Samsudin, S.H., Rojan, M.A.*, Jasri, M.A.H.M., The hardness variation due to secondary

heating in friction stir welding of small diameter aluminium alloy 6063 pipe (2016) Advanced Structured

Materials, 61, pp. 87-94.

44. Ridzuan, M.J.M., Majid, M.S.A., Afendi, M., Rahman, M.N., Azduwin, Y.K., Thermal, composition and

morphological properties of untreated and alkali-treated napier grass fibres (2016) Journal of Engineering and

CURRICULUM VITAE | 2018

Applied Sciences, 11 (11), pp. 2485-2489.

45. Ahmad, H., Majid, M.S.A., Rojan, M.A., Mat, F., Dan-Mallam, Y., Hydrothermal effects on the burst strength of

impacted glass fiber/epoxy composite pipes (2016) Materialpruefung/Materials Testing, 58 (4), pp. 333-336.

46. Khor, S.F., Md Yusoff, M.H.A., Cheng, E.M., Rojan, M.A., Johar, B., Chik, A., Talib, Z.A., Poobalan, B., Dielectric

spectroscopy on mixture of rice husk, rice husk ash and rice bran from 4 Hz to 1 MHz (2016) International Journal

of GEOMATE, 11 (1), pp. 2150-2154.

47. Cheng, E.M., Abdul Malek, M.F., Khor, S.F., You, K.Y., Lee, K.Y., Rojan, M.A., Abu Bakar, S., Mohd Nasir, N.F.,

Zakaria, Z., Tan, W.H., Reflection and dielectric measurement for salinity of water using microstrip loop antenna

and dielectric probe (2016) International Journal of GEOMATE, 11 (2), pp. 2335-2340.

2015 48. Krishnan, P., Abdul Majid, M.S., Afendi, M., Gibson, A.G., Marzuki, H.F.A., Effects of winding angle on the

behaviour of glass/epoxy pipes under multiaxial cyclic loading (2015) Materials and Design, 88, pp. 196-206.

49. Mansor, M.F.C., Cheng, E.M., Malek, M.F.A., Beh, H.G., Chik, A., Khor, S.F., Rojan, M.A., Nasir, N.F.M., Ong, S.A.,

Bakar, S.A., Study on 10 GHz electromagnetic wave absorption of cullet doped with iron (II, III) oxide (2015)

Proceedings - 2015 2nd International Conference on Biomedical Engineering, ICoBE 2015, art. no. 7235922, .

50. Aishah, S., Fareq, M., Cheng, E.M., Lee, K.Y., Tan, W.C., Afendi, M., Shahriman, A.B., Nasir, N.F.M., Tan, W.H.,

Syahirah, K.N., You, K.Y., Khor, S.F., Study on moisture content in animal fats using Six-Port Reflectometer (SPR)

(2015) Proceedings - 2015 2nd International Conference on Biomedical Engineering, ICoBE 2015, art. no. 7235920 .

51. Jasri, M.A.H.M., Afendi, M.*, Ismail, A., Ishak, M., The microstructure of aluminum A5083 butt joint by friction

stir welding (2015) AIP Conference Proceedings, 1660, art. no. 070103, .

52. Jasri, M.A.H.M., Afendi, M.*, Ismail, A., Ishak, M.. The hardness effect of friction stir welding by MILKO 37 milling

machine (2015) AIP Conference Proceedings, 1660, art. no. 070096, .

53. Fitriah, S.N., Abdul Majid, M.S., Daud, R., Afendi, M., Nazirah, Z.S., The effects of hydrothermal ageing on the

crushing behavior of glass/epoxy composite pipes (2015) Materials Science Forum, 819, pp. 411-416.

54. Abdul Majid, M.S., Afendi, M., Daud, R., Gibson, A.G., Assaleh, T.A., Hale, J.M., Hekman, M., Acoustic emission

monitoring of multiaxial ultimate elastic wall stress tests of glass fibre-reinforced epoxy composite pipes (2015)

Advanced Composite Materials, 24 (1), pp. 1-16.

55. Tan, W.-H., Afendi, M., Ahmad, R., Daud, R., Shukry, M., Cheng, E.M., Sound absorption analysis on

micro-perforated panel sound absorber with multiple size air cavities (2015) International Journal of Mechanical

and Mechatronics Engineering, 15 (5), pp. 71-76.

56. Ridzuan, M.J.M., Majid, M.S.A., Afendi, M., Azduwin, K., Kanafiah, S.N.A., Dan-mallam, Y., The Effects of the

Alkaline Treatment's Soaking Exposure on the Tensile Strength of Napier Fibre (2015) Procedia Manufacturing, 2,

pp. 353-358.

57. Haameem, J.A.M., Abdul Majid, M.S., Afendi, M., Haslan Fadli, M., Helmi, E.A., Fahmi, I.Tensile and flexural

strength of untreated napier grass fibre/polyester composites (2015) Materials Science Forum, 819, pp. 295-300.

58. Izzawati, B., Afendi, M.*, Nurhashima, S., Nor, A., Abdullah, A.R., Daud, R., Abdul Majid, M.S., Strength of

adhesive T-joint in granulator fluidization bed at elevated temperature (2015) Materials Science Forum, 819, pp.

443-448.

59. Mazlee, M.N., Shamsul, J.B., Yasmin, Y., Shamsudin, S.R., Risby, M.S., Afendi, M., The effects of rolling

deformation and annealing treatment on damping capacity of 1200 aluminium alloy (2015) Materials Science

CURRICULUM VITAE | 2018

Forum, 819, pp. 20-24.

60. Nurhashima, S., Afendi, M.*, Izzawati, B., Nor, A., Abdullah, A.R., Amin, N.A.M., Abdul Majid, M.S., Daud, R.,

Strength of adhesive T-joint under moisture condition (2015) Materials Science Forum, 819, pp. 437-442.

61. Che Mansor, M.F., Cheng, E.M., Zakaria, Z., Abdul Malek, M.F., Chik, A., Rojan, M.A., Zahid, L., Abu Bakar, S.,

Mohd Nasir, N.F., Khor, S.F., Beh, H.G.Microwave absorption analysis on recycled glass doped with Ferum (II, III)

Oxide (Fe2O3) (2015) International Journal of Mechanical and Mechatronics Engineering, 15 (5), pp. 1-13.

2014 62. Idrus, H., Afendi, M.*, Hoe, W.C., Fatigue crack initiation and growth of aluminum alloy with stress ratio effects

(2014) Key Engineering Materials, 594-595, pp. 1105-1111.

63. Nawi, N.A.M., Abdullah, A.R., Afendi, M.*, Majid, M.S.A., Daud, R., Idrus, H., Numerical stress analysis of epoxy

adhesively bonded dissimilar joint (2014) Key Engineering Materials, 594-595, pp. 930-934.

64. Majid, M.S.A., Afendi, M.*, Daud, R., Amin, N.A.M., Mohamad, A., Cheng, E.M., Gibson, A.G., Hekman, M.,

General lifetime damage model for glass fibre reinforced epoxy (GRE) composite pipes under multiaxial loading

(2014) Key Engineering Materials, 594-595, pp. 624-628.

65. Jasri, M.A.H.M., Afendi, M.*, Fauzi, A.H.M., Prototype of compact flexural fatigue testing machine (2014)

Applied Mechanics and Materials, 554, pp. 350-354.

66. Afendi, M.*, Athirah, N., Abdul Majid, M.S., Daud, R., Teramoto, T., Experimental and numerical investigation of

V-shaped epoxy adhesive joints (2014) Journal of Mechanical Engineering and Sciences, 6, pp. 929-939.

67. Fartini, M.S., Abdul Majid, M.S., Afendi, M., Amin, N.A.M., Mohamad, A., Effects of elevated temperatures on the

compression strength of nanoclay filled unsaturated polyester resin (2014) Applied Mechanics and Materials,

554, pp. 208-212.

68. Krishnan, P., Abdul Majid, M.S., Afendi, M., Marzuki, H.F., Mohd Kazim, M.N.F., Short-term test of ±55 ° filament

wound GRE composite pipes under multiaxial stress ratios (2014) Applied Mechanics and Materials, 554, pp.

371-375.

69. Athirah, N., Afendi, M.*, Hafizan, K., Amin, N.A.M., Majid, M.S.A., Stress and thermal analysis of cubesat

structure (2014) Applied Mechanics and Materials, 554, pp. 426-430.

70. Nor, A., Afendi, M.*, Abdul Majid, M.S., Abdullah, A.R., Shahriman, A.B., Stress analysis of adhesive bonding of

urea granulator fluidization bed (2014) Applied Mechanics and Materials, 554, pp. 160-164.

71. Fartini, M.S., Abdul Majid, M.S., Afendi, M., Daud, R., Mohamad, A., Effect of nano-clay and their dispersion

techniques on compressive properties of unsaturated polyester resin (2014) Applied Mechanics and Materials,

554, pp. 27-31.

72. Abdul Majid, M.S., Gibson, A.G., Hekman, M., Afendi, M., Amin, N.A.M., Strain response and damage modelling

of glass/epoxy pipes under various stress ratios (2014) Plastics, Rubber and Composites, 43 (9), pp. 290-299.

73. Haameem, M.J.A., Abdul Majid, M.S., Ubaidillah, E.A.H.E., Afendi, M., Daud, R., Amin, N.A.M., Tensile strength of

untreated napier grass fibre reinforced unsaturated polyester composites (2014) Applied Mechanics and

Materials, 554, pp. 189-193.

74. Afendi, M.*, Hafizan, K., Abdul Majid, M.S., Daud, R., Amin, N.A.M., Meng, C.E., Teramoto, T., Fracture

characteristics of shear adhesive dissimilar joint (2014) Applied Mechanics and Materials, 606, pp. 165-169.

75. Nurhashima, S., Afendi, M.*, Izzawati, B., Amin, N.A.M., Abdul Majid, M.S., Taufik, M., Strength of

three-point-bending ductile adhesive joint with dissimilar adherents (2014) Applied Mechanics and Materials,

CURRICULUM VITAE | 2018

554, pp. 406-410.

76. Izzawati, B., Afendi, M.*, Afif, M., Nurhashima, S., Daud, R., Amin, N.A.M., Abdul Majid, M.S., 3D finite element

stress analysis of butt adhesively bonded dissimilar joint: Effect of bond thickness on strength (2014) Applied

Mechanics and Materials, 554, pp. 355-359.

77. Abdul Majid, M.S., Afendi, M., Daud, R., Amin, N.A.M., Mohamad, A., Hekman, M., The interlaminar shear

strength test of helical wound glass fibre reinforced epoxy laminates subjected to hydrothermal ageing (2014)

Applied Mechanics and Materials, 554, pp. 391-395.

78. Abdul Majid, M.S., Daud, R., Afendi, M., Amin, N.A.M., Cheng, E.M., Gibson, A.G., Hekman, M., Stress-strain

response modelling of glass fibre reinforced epoxy composite pipes under multiaxial loadings (2014) Journal of

Mechanical Engineering and Sciences, 6, pp. 916-928.

79. Atikah, N., Afendi, M.*, Hirmaliza, S., Abdul Majid, M.S., Amira, N., Mazlee, M.N., Strength of ductile adhesive

butt joint bonded with dissimilar adherents: Effect of surface roughness (2014) Applied Mechanics and

Materials, 554, pp. 366-370.

80. Mohd Jasri, M.A.H., Afendi, M.*, Nik, N.Z., Izzawati, B., Nurhashima, S., Nor, A., Yahud, S., Amin, N.A.M., Tensile

shear strength of wood adhesive from recycled polystyrene (2014) Applied Mechanics and Materials, 554, pp.

3-6.

81. Cheng, E.M., Abbas, Z., Fareq, M., Khor, S.F., You, K.Y., Lee, K.Y., Abdul Majid, M.S., Rojan, M.A., The effect of

physical changes in a furnished indoor environment on Wireless Local Area Network (wlan) signals (2014)

International Journal of Mechanical and Mechatronics Engineering, 14 (5), pp. 1-15.

82. Cheng, E.M., Fareq, M., Shahriman, A.B., Mohd Afendi, R., Lee, Y.S., Khor, S.F., Tan, W.H., Nashrul Fazli, M.N.,

Abdullah, A.Z., Jusoh, M.A., Development of microstrip patch antenna sensing system for salinity and sugar

detection in water (2014) International Journal of Mechanical and Mechatronics Engineering, 14 (5), pp. 31-36.

83. Cheng, E.M., Fareq, M., Shahriman, A.B., Afendi, M., Zulkarnay, Z., Khor, S.F., Liyana, Z., Nashrul Fazli, M.N., Tan,

W.H., Noorpi, N.S.M., Mukhtar, N.M., Othman, M., Development of low cost microwave detection system for

salinity and sugar detection (2014) International Journal of Mechanical and Mechatronics Engineering, 14 (5), pp.

59-71.

2013 84. Abdullah, A.R., Afendi, M.*, Majid, M.S.A., Effect of adhesive thickness on adhesively bonded T-joint (2013) IOP

Conference Series: Materials Science and Engineering, 50 (1), art. no. 012063, .

85. Daud, R., Ariffin, A.K., Abdullah, S., Majid, M.S.A., Rojan, M.A., Mathematical model of elastic crack interaction

and two-dimensional finite element analysis based on Griffith energy release rate (2013) Advanced Materials

Research, 795, pp. 587-590.

86. Majid, M.S.A., Afendi, M., Daud, R., Gibson, A.G., Hekman, M., Effects of winding angles in biaxial ultimate elastic

wall stress (UEWS) tests of glass gibre reinforced epoxy (GRE) composite pipes (2013) Advanced Materials

Research, 795, pp. 424-428.

87. Afendi, M.*, Majid, M.S.A., Daud, R., Ishino, Y., Teramoto, T., Stress analysis and failure characterizations of

V-shaped epoxy adhesively bonded joint (2013) Advanced Materials Research, 795, pp. 290-293.

88. Majid, M.S.A., Afendi, M., Daud, R., Amin, N.A.M., Mohamad, A., Cheng, E.M., Gibson, A.G., Modelling of

multi-axial ultimate elastic wall stress (UEWS) test for glass fibre reinforced epoxy (GRE) composite pipes (2013)

Applied Mechanics and Materials, 367, pp. 113-117.

CURRICULUM VITAE | 2018

89. Amin, N.A.M., Mohamad, A., Majid, M.S.A., Afendi, M., Bruno, F., Belusko, M., Experimental investigation of PCM

spheres in thermal energy storage system (2013) Applied Mechanics and Materials, 367, pp. 228-233.

90. Afendi, M.*, Abdul Majid, M.S., Daud, R., Abdul Rahman, A., Teramoto, T., Strength prediction and reliability of

brittle epoxy adhesively bonded dissimilar joint (2013) International Journal of Adhesion and Adhesives, 45, pp.

21-31.

91. Cheng, E.M., Fareq, M., Abdullah, F.S., Wee, F.H., Khor, S.F., Lee, Y.S., Afendi, M., Shukry, M., Shahriman, A.B.,

Khairunizanm, W., Liyana, Z.Y., Dielectric spectroscopy of pharmaceutical drug (Paracetamol) dosage in water

(2013) RFM 2013 - 2013 IEEE International RF and Microwave Conference, Proceedings, art. no. 6757295, pp.

409-413.

2012 92. Afendi, M.*, Rahman, A.A., Haftirman, H., Majid, M.S.A., Syayuthi A.R., A., Closed-form solutions for epoxy

adhesively bonded dissimilar joint (2012) 8th Asian-Australasian Conference on Composite Materials 2012, ACCM

2012 - Composites: Enabling Tomorrow's Industry Today, 1, pp. 538-544.

93. Syayuthi A.R., A., Haftirman, Afendi, M., Majid, M.S.A., Wei, N.B., Manan, M.S.A., The effect of different impact

velocities on advanced composite material for aircraft application (2012) 8th Asian-Australasian Conference on

Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today, 1, pp. 248-253.

94. Majid, M.S.A., Gibson, A.G., Assaleh, T.A., Rookus, C.A.P., Hekman, M., Afendy, M., Haftirman, Syayuthi A.R.,

A.Damage characterisation of glass fibre-reinforced epoxy (GRE) pipes under biaxial ultimate elastic wall stress

(UEWS) tests using acoustic emissions (2012) 8th Asian-Australasian Conference on Composite Materials 2012,

ACCM 2012 - Composites: Enabling Tomorrow's Industry Today, 2, pp. 1592-1597.

2011 95. Afendi, M.*, Teramoto, T., Bakri, H.B., Strength prediction of epoxy adhesively bonded scarf joints of dissimilar

adherends(2011) International Journal of Adhesion and Adhesives, 31 (6), pp. 402-411.

96. Afendi, M.*, Teramoto, T., Matsuda, A., Strength and fracture characteristics of SUS304/AL-alloy scarf adhesive

joint with various adhesive thicknesses (2011) Key Engineering Materials, 462-463, pp. 768-773.

International Conferences

Over 60 local and international conferences publications

TEACHING/SUPERVISION

Undergraduates

1. ENT 147/3 Engineering Materials (2017/2018, Semester 1)

2. EUT 440/3 Engineers in Society (2016/2017, Semester 2)

3. ENT 147/3 Engineering Materials (2016/2017, Semester 1)

4. EUT 440/3 Engineers in Society (2015/2016 , Semester 2)

5. ENT 145/3 Material Engineering (2015/2016, Semester 1)

6. EUT 440/3 Engineers in Society (2014/2015, Semester 2)

CURRICULUM VITAE | 2018

7. ENT 145/3 Material Engineering (2014/2015, Semester 1)

8. ENT 142/3 Engineering Dynamics (2013/2014, Semester 2)

9. ENT 347/3 Finite Element Methods (FEM) (2013/2014, Semester 1)

10. ENT 144/2 Machining Skills (2012/2013, Semester 2)

11. ENT 347/3 Finite Element Methods (FEM) (2012/2013, Semester 1)

12. ENT 467/3 Finite Element Analysis (FEA) (2011/2012, Semester 2)

13. ENT 352/3 Computer Aided Engineering Design (2011/2012, Semester 1)

No. of Postgraduate/Undergraduate Students**

PhD MSc FYP

Main Supervisor 2 8 (4*) 36*

Co-supervisor 2* 4 (4*) -

Total 4 (2*) 12 (8*) 36*

*Graduated, **Updated from GAMIS 8th August 2017

Doctor of Philosophy (by research)

1. Main supervisor: Mariam Binti Majid, Fatigue Analysis of Hybrid Joints for Lightweight Vehicle Structure, 2015/2016

(On-going)

2. Main supervisor: Wan Mohd Syafiq Bin Wan Sulong, Mechanical Properties and Fracture of Friction Stir Welded

Aluminium Alloy 5083, 2014/2015 (On-going)

3. Co-supervisor: Izzawati Binti Basirom, Stress Analysis of Implant-Bone Fixation at Different Fracture Angle, 2016/2017

(On-going)

4. Co-supervisor: Mohd Ridzuan Bin Mohd Jamir , Development and Charaterization of Novel Hybrid Napier/Glass Fibre

Reinforced Composites, 2014/2015 (Completed)

5. Co-supervisor: Prenesh Krishnan , Design and Development of a Performance Monitoring System for Composite

Pipes Under Multiaxial Loadings, 2012/2013 (Completed)

Master of Science (by research)

1. Main supervisor: Gurubaran A/L Panerselvan, Fracture toughness of Arcan hybrid adhesive joint: Effect of mixed mode

loading, 2016/2017 (Completed)

2. Main supervisor: Mohd Hafiz Bin Mohd Nasir, Investigation on Mechanical Properties and Fracture Behaviour of

Friction Stir Welded Aluminium Alloy, 2015/2016 (On-going)

3. Main supervisor: Nor Fatin Binti Bahri, Failure Investigation of T-joint Bonded with High Temperatures Adhesive,

2014/2015 (On-going)

4. Main supervisor: Nurul Amira Binti Azmi, Effect of Heat Treatment on Strength of Adhesive Bonding, 2014/2015

(On-going)

5. Main supervisor: Nurul Atikah Binti Datu Derin, Heat Treatment Effect on Strength of Adhesive Joint, 2013/2014

(On-going)

CURRICULUM VITAE | 2018

6. Main supervisor: Nor Bakyah Binti Abu, Effects of Bond Thickness on Interfacial Fracture Toughness of T-Joints in

Fluidization Bed, 2013/2014 (On-going)

7. Main supervisor: Siti Nurhashima Binti Mohd Isa, Humidity Effects On The Mechanical Characterization Of Adhesive

T-Joint In Fluidization Bed, 2013/2014 (Completed)

8. Main supervisor: Izzawati Binti Basirom, Mechanical Characterization Of Adhesive T-Joint In Fluidization Bed At

Elevated Temperatures, 2013/2014 (Completed)

9. Main supervisor: Mohd Faizi Bin Baharudin, Strength and Fracture Toughness of Adhesive Tubular Joint in Automotive

Chassis, 2013/2014 (On-going)

10. Main supervisor: Muhammad Azrie Husainy bin Mohd Jasri, Mechanical Properties and Fracture of Friction Stir Welded

Aluminium Alloy 5083, 2013/2014 (On-going)

11. Main supervisor: Ku Hafizan Bin Ku Bahaudin, Durability & Microwave Non-destructive Evaluation of

Composite/Aluminum Hybrid Joints for Light-weight Automotive Structures, 2012/2013 (On-going)

12. Main supervisor: Nur Athirah Binti Mat Nawi, Closed-form Solutions and Stress Analysis of Adhesively Bonded

Dissimilar Joint, 2012/2013 (Completed)

13. Co- supervisor: Syafiq Farhan Bin Shamsuri, Finite Element Analysis of Aseptic Loosening Mechanism for Revision of

Total Knee Replacement, 2016/2017 (On-going)

14. Co- supervisor: Wan Shahrizal Bin Wan Nadhari, The Behaviour of Multidirectional Wound Glass Fibre Reinforced Epoxy

(GRE) under Biaxial Fatigue Test, 2014/2015 (On-going)

15. Co- supervisor: Mohd Nizam Bin Yob, Crashworthiness of an Energy Absorbing Structure, 2013/2014 (On-going)

16. Co- supervisor: Fahmi Bin Idris, Low Impact Response of A Novel Napier Grass Fibre Composite, 2013/2014 (On-going)

17. Co- supervisor: Fartini Binti Mohd Suhut, Thermo-mechanical Properties if Napier Filled Polyester Composites,

2013/2014 (Completed)

18. Co- supervisor: Muhammad Haameem Bin Jameel Ahamed, Mechanical Properties Characterization Of A Novel Napier

Grass Fibre Reinforced Epoxy Composites Laminates, 2013/2014 (Completed)

19. Co- supervisor: Hawa Binti Ahmad, Effects Of Aging On Ultimate Elastic Wall Stress (UEWS) Test Of Glass Fibre

Reinforced Epoxy (GFRE) Pipes Subjected To Impact Loading, 2013/2014 (Completed)

20. Co- supervisor: Masniezam Bin Ahmad, An Energy Absorption Characterization of Improved Thin-walled Tube Under

Dynamic Impact Loading, 2011/2012 (Completed)

6. AWARDS

Academic

1. UniMAP Young Scientist 2017

2. Anugerah Kecemerlangan Penyelidikan (Research Award) 2015

3. Anugerah Perkhidmatan Cemerlang (Excellent Awards) 2014

4. Anugerah Kecemerlangan Penyelidikan (Research Award) 2014

Exhibition

No. Year Exhibition Product Award

CURRICULUM VITAE | 2018

1. 2015 MTE An Aroma Adhesive Bronze

2. 2014 INNOFEST New adhesive from Recycle Polystyrene Gold

3. 2014 INNOFEST Portable Friction Stir Welding Machine Gold

4. 2014 ITEX An Automatic Portable Pressure Testing Rig to Determine the

Performance of The GRE Composite Pipes Under Various Stress

Ratios (C0-)

Silver

5. 2014 ITEX Compact Flexural Fatigue Testing Machine Silver

6. 2014 i-ENVEX Compact Friction Stir Welding Machine Gold

7. 2014 i-ENVEX New Adhesive from Recycled Polystyrene Bronze

8. 2013 MTE New Adhesive from Recycled Polystyrene Silver

9. 2013 UniMAP Expo Prototype of Compact Micro-flexural Fatigue Testing Machine Gold

10. 2013 UniMAP Expo New Adhesive from Recycle Polystyrene Gold

11. 2013 MTE i-Harvester: Cost Effective and No More Back Pain, an Initiative

to Ensure Food Security by Ease and Efficiency (Co-)

Silver

12. 2013 i-ENVEX Prototype of Compact Micro-flexural Testing Machine Bronze

13. 2012 MTE Intelligent Irrigation and Flood Management System Using

renewable Hybrid Powered and Wireless Control System (Co-)

Bronze

14. 2012 UniMAP Expo Prototype of Compact Micro-flexural Testing Machine Silver

7. INTERNATIONAL/UNIVERSITY/FACULTY/SCHOOL COMMITTEES

No. Year Institution Item Responsibility

1. 2017 UMP MSc thesis: Nurul Hidayah Binti Othman, Effect of shoulder to

pin ratio on mechanical and microstructural properties of

friction stir welded magnesium alloy

External Examiner

2. 2017 UTHM Manuscript, Solid Mechanics (Step-by-step Solutions) External Examiner

3. 2017 UniMAP International Conference on Applications and Design in

Mechanical Engineering (ICADME 2017)

Co-Chair

4. 2017 UniMAP Integrated Design Project (IDP) Day 2017, School of Mechatronic

Engineering

Jury

5. 2017 KKTM Kolej Kemahiran Tinggi Balik Pulau, January – June 2017 External Verifier

6. 2017 UniMAP Bachelor Engineering Technology (Mechanical : Material

Process)

Internal Auditor

7. 2016 Univ. of

Tsukuba

Tsukuba Global Science Week 2016, Japan Malaysia

Representative

8. 2016 KKTM Kolej Kemahiran Tinggi Balik Pulau, July – December 2016 External Verifier

9. 2016 UTHM MSc thesis: Norhaslinda Binti Hj Abdullah, Axial Energy

Absoption Performances Of Woven Kenaf Fiber Reinforced

Polyester Cylindrical Composites Tubes

External Examiner

10. 2016 UniMAP Integrated Design Project (IDP) Day 2016, School of Jury

CURRICULUM VITAE | 2018

Mechatronic Engineering

11. 2016 UniMAP MSc thesis: Siti Nazirah Binti Zamri, Crushing Behaviours of Glass

Fibre Reinforced Epoxy Composites Pipes

Internal Examiner

12. 2015 UniMAP Talk on Route to Become A Chartered Engineer Speaker

13. 2015 UniMAP MSc thesis: Ahmad Faizal Bin Annuar, Fundamental Study of

Fracture Mechanics Analysis of Multiple Edge Cracks using

Multiple Sharp Cuts

Internal Examiner

14. 2015 UniMAP International Conference on Applications and Design in

Mechanical Engineering (ICADME 2015)

Co-Chair

15. 2014 KKTM Kolej Kemahiran Tinggi Balik Pulau , July-Dec 2014 External Verifier

16. 2013 UniMAP The 2nd International Conference on Sustainable Materials

Engineering (ICoSM2013)

Session Chair

17. 2013 UniMAP PhD thesis: Riyadh Azzawi Badr, Study the Effect of Surface

Roughness on the Friction Coefficient and Wear between the

Surfaces Sliding

Internal Examiner

18. 2012 UniMAP International Conference on Applications and Design in

Mechanical Engineering (ICADME 2012)

Session Chair

19. 2011-2013 Polytechnic

Dept

Sistem Penaksiran Program KPT External Examiner

20. 2011 Polytechnic

Dept

Pemasangan dan Penilaian Soalan Peperiksaan Akhir Bagi

Jabatan Kejuruteraan Mekanikal Tahap 1, Tahap 2 & Tahap 3

Politeknik

External Examiner

8. TRAININGS/WORKSHOPS

No. Year Item Date

1. 2017 LEP2.0 Strategic Collaboration with Relevant Japanese Organizations to

Promote/Enhance/Further Development the Medical Devices Industry

24 Oct –

8 Nov 2017

2. 2016 Talk On Route To Become A Chartered Engineer (C.Eng) & Coaching On How To

Convert Chartered Engineer (C.Eng) To Professional Engineer (P.Eng) Bem For

Academician

7 Dec 2016

3. 2015 Workshop on High Impact Article Writing 9 Jan 2015

4. 2014 Talk on Route to Become A Chartered Engineer 13 Nov 2014

5. 2014 BEM Mandatory Course – Codes of Ethics 28-29 April 2014

6. 2014 Workshop On Outcome Based Education (OBE) 14 April 2014

7. 2013 BEM Mandatory Course – Safety and Health at Works 22&23 Oct 2013

8. 2013 BEM Mandatory Course – Engineering Management Practice 8&9 July 2013

9. 2013 Workshop On Enhancing Engineering Education@Unimap 29 July 2013

10. 2012 Workshop on Quality Academic for Engineering Programme Towards 2013

Accreditation Visit

27 & 28 Aug 2012

11. 2012 Half Day Forum on The Code of Ethics For Engineer In The Teaching Profession 10 Apr 2012

CURRICULUM VITAE | 2018

12. 2012 Introduction to ANSYS Workbench Mechanical and ANSYS Fluent 8 – 16 Feb 2012

13. 2012 Catia V5 Basic Training 25 Jan – 3 Feb 2012

14. 2011 Enterprising UniMAP: “Business Coaching & Mentoring For Successful

Commercialisation”

20 Dec 2011

15. 2011 Kursus Kepimpinan Inovatif dan Transformasi Pensyarah Muda, AKEPT 15 – 17 Nov 2011

9. INDUSTRIAL COLLABORATIONS/CONSULTATIONS

1. Sponsored Research Technopreneur at UniMAP Sdn Bhd, “Enhancement of Engine Performance by Studying the

Effect of Ca Profiles and Intake Design using 1-D Simulation Analysis”, 1 Nov 2017 – 31 Oct 2020. RM 72,000.

2. Railway Assets Corporation (RAC), Kajang Sentral Business Park, “Fatigue Crack Investigation of UIC 54 Rail Profile

for High Speed Railways”, 25 Jan 2017 – present.

3. Pusat Latihan Teknologi Tinggi (ADTEC) Kulim, “”WEDM process on Titanium Alloy using Taguchi method”, 1 Sep

2015 – 31 Dec 2016.

4. Advanced Materials Research Centre (AMREC), SIRIM Kulim High Tech, “A novel Napier grass fibre reinforced

polyester composites”, 18 Feb 2014 – present.

5. Petronas Fertilizer Kedah Sdn Bhd (PFK), Gurun, “Adhesive bonding of urea granulator fluidization bed”, June 2012

– Dec 2016.

6. Syarikat Motosikal dan Enjin Nasional Sdn. Bhd (Modenas), Gurun, “Strength of Adhesive Single Joint in Chassis of

Racing Sports Car”, Jan 2012 – Jan 2013.