1 CURRICULUM VITAE MARK A. LATTA, D.M.D., M.S., F.A.C.D. ADDRESS Creighton University School of Dentistry 2500 California Plaza Omaha, Nebraska 68178 (402) 280-5061 EDUCATION AND TRAINING Degree M.S. University of Maryland Oral Biology Baltimore College of Dental Surgery Baltimore, Maryland 1991-1995 D.M.D. University of Pennsylvania School of Dental Medicine Philadelphia, Pennsylvania 1979-1983 General Practice Residency in Dentistry York Hospital Department of Dentistry York, Pennsylvania 1983-1984 (Certificate) A.B. Lafayette College Chemistry Easton, Pennsylvania 1974-1978
Transcript
1
CURRICULUM VITAE
MARK A. LATTA, D.M.D., M.S., F.A.C.D.
ADDRESS Creighton University School of Dentistry 2500 California Plaza Omaha, Nebraska 68178 (402) 280-5061 EDUCATION AND TRAINING Degree M.S. University of Maryland Oral Biology Baltimore College of Dental Surgery Baltimore, Maryland 1991-1995 D.M.D. University of Pennsylvania School of Dental Medicine Philadelphia, Pennsylvania 1979-1983 General Practice Residency in Dentistry York Hospital Department of Dentistry York, Pennsylvania 1983-1984 (Certificate) A.B. Lafayette College Chemistry Easton, Pennsylvania 1974-1978
Mark A. Latta, D.M.D.,M.S.
1
PROFESSIONAL EXPERIENCE
Creighton University School of Dentistry Omaha, Nebraska 2011-Present Dean 2003-Present Professor, General Dentistry 1998-2011 Associate Dean for Research 1996-1998 Assistant Dean for Research and Continuing Education 1995-1996 Director of Research 1995-2009 Director, Center for Oral Health Research 1995-2003 Associate Professor, General Dentistry Currently dean of School of Dentistry. Led successful CODA accreditation with no recommendations in 2012. Exceeded budget in each year as dean while enhancing student outcome measurements. Created a unique visiting industrial scholar program—the only one of its kind in US dental schools. Completed 18 month Ignatian Colleagues Program (ICP) June 2012-January 2014. Previously was chief research administrator for the School of Dentistry. Initiated and was the founding Director of the Masters in Oral Biology program. Responsible for development and funding of a vibrant research program and facilitating faculty collaboration in research. Has executed over 190 laboratory and 40 clinical research projects and generated over $2,500,000 of extramural funding leading to a “commendation” from the 1998 American Dental Association accreditation site visit team. Successful at attracting funding from 15 different corporate sponsors. Published over 200 abstracts and more than 60 manuscripts and is on the editorial board of Operative Dentistry. 1993 - 1995 Director, Research and Development Dentsply International, Trubyte Division York, Pennsylvania Overall management responsibility for new product development related to removable prosthodontics for the Trubyte laboratory division of Dentsply International. Specific areas of development: castable ceramics, polymers for denture teeth and denture bases, and visible light cured prosthodontic and restorative materials. Responsible for both clinical and technical research and development. Involved in developing overall strategies to meet divisional goals from a technical viewpoint. Significant contact with outside agencies such as the ADA and FDA as related to product development as well as professional relations. Full budget responsibility for technical and clinical R&D, and educational services, managing a staff of over 20 people including chemists, engineers, dental technicians and dentists. Also responsible for technical services and education functions related to removable prosthodontics including curriculum development for, and presentation of, didactic and hands-on classes.
Mark A. Latta, D.M.D.,M.S.
2
PROFESSIONAL EXPERIENCE (Continued) 1990 - 1993 Director, Clinical Research Dentsply International, Trubyte Division York, Pennsylvania Specific responsibility for verifying the safety and efficacy of new products by negotiating, implementing and monitoring research protocols for primate and human testing. Responsible for the preparation of product instructions when related to clinical use. Direct project management duties for development programs of direct-clinical use products. General responsibility for providing input into all phases of new product development, marketing, advertising and professional relations in support of the goals of the Division. Provided professional input in evaluating outside inventions brought to Dentsply for commercialization. Budget responsibility for professional research activities including clinical research protocols. 1989 - 1990 Associate Director, Professional Research Dentsply International, Trubyte Division York, Pennsylvania Support position providing clinical input into all phases of new product development. Assisted in development of clinical protocols, and answered customer inquiries. 1988 - 1989 Clinical Research Associate Dentsply International, Trubyte Division York, Pennsylvania Assistant to Director of Professional Research in providing the clinical perspective to the product development process. Primary tasks related to patient treatment to provide feedback for new product development or to support advertising and marketing. 1986 - 1988 Dental Director York Health Corporation York, Pennsylvania Administrative and clinical director of dental services in a public health care facility. Responsible for budgeting, staff evaluation, quality assurance and risk management activities. Clinical responsibility for providing all phases of general dental care including an in-patient hospital practice providing intravenous sedation and OR general anesthesia for medically compromised and mentally and physically handicapped patients. Author of clinical protocols for in-patient dental management of cancer patients. Teaching preceptor for general practice residents and 4th year dental externs from the University of Pennsylvania in training at the York Hospital Dental Center.
Mark A. Latta, D.M.D.,M.S.
3
PROFESSIONAL EXPERIENCE (Continued) 1985 - 1988 Private General Dentistry Practice (Part-Time) 800 Edgewood Road York, Pennsylvania Part-time private practice general dental practice including hospital dentistry. 1984 - 1986 Staff Dentist York Health Corporation York, Pennsylvania Provider of clinical services in fulfillment of a scholarship obligation to the National Health Service Corps. 1982 - 1983 Student Preclinical Instructor Department of Restorative Dentistry University of Pennsylvania School of Dental Medicine 1978 - 1979 Process Chemist J. T. Baker Chemical Company Phillipsburg, New Jersey 1977 - 1978 Research Analytical Chemist - Extern American Can Company, Princeton Research Lab Princeton, New Jersey PROFESSIONAL LICENSURE Pennsylvania No. DS-023765-L October 10, 1983 DEA License No. AL-2375485 Nebraska No. 6013 July 15, 1995 National Board Dental Examination June 21, 1983 HOSPITAL APPOINTMENTS York Hospital York, Pennsylvania Active Staff: 1984 - 1995 Chief, Division of Prosthodontics: 1989 – 1992
Mark A. Latta, D.M.D.,M.S.
4
ACADEMIC BACKGROUND Academic Appointments Creighton University School of Dentistry Promoted to Professor of General Dentistry, 2003 Tenure Conferred March 21, 2001 Associate Professor, Department of General Dentistry, 2000-2003 Associate Professor, Department of Comprehensive Dental Care 1995-2000 Creighton University College of Arts and Science Professor of Chemistry-secondary appointment granted 2014
University of Pennsylvania, School of Dental Medicine Clinical Associate Professor, Department of Oral Medicine 1986-1995 Nihon University College of Dentistry, Tokyo Japan Visiting Professor of Operative Dentistry 2013-present
Administrative Appointments Creighton University School of Dentistry
Dean 2011-present Director- Master’s Degree Program in Oral Biology 2010-2011 Associate Dean for Research 2000-2011 Associate Dean for Research and Continuing Education 1998-1999 Assistant Dean for Research and Continuing Education 1996-1998 Director-Center for Oral Health Research 1995-2011 Director of Research 1995-1996 Teaching Responsibilities Creighton University School of Dentistry GDD 314, 414 General Dentistry Clinic 2000-2011 CPD 335 Evidence Based Dentistry- Course Director 1999-2011 CDC 414 Comprehensive Dental Care Clinic 1995-2000 GDS 135 Dental Materials II- lecturer 1995-Present GDO 313 Operative Dentistry Lecture- lecturer 1995-Present
Mark A. Latta, D.M.D.,M.S.
5
ACADEMIC BACKGROUND/SERVICE (Continued)
University Service
Creighton University Chair, Law Dean Search Committee, 2014 Senior Co-leader, Strategic Planning Bridges Initiatives, 2013-present Co-leader Institute for Inter-professional Health Strategic Initiative, 2013-present Contributor, Online Ministry-reflections, 2013-present
University Strategic Planning Committee, 2011-2013 Search Committee Vice President for Health Sciences, 2008-2009
Ad-hoc committee on Improving Clinical Research Infrastructure, 2003-2004 Ethical Conduct in Research Planning Committee, 2002-2009
University Research Council, 2001-2011 Nominating Committee for Health Sciences Vice President, 2001
University Committee on Finance, 1996-1998 Administrative Review Committee, Health Sciences, 1996
Health Science Schools Research Advisory Committee, 1995-2012 Search Committee Director of Technology Transfer 1995
Creighton University School of Dentistry AD-hoc Committee on Staff Re-organization, 2009-2010 Strategic Pathways Initiative Steering Committee, 2005-2006 Technology Strategic Planning Committee 2002-Present Chair, Search Committee Chair, General Dentistry Department 2000 Steering Committee, Accreditation, 1997-1998 and 2004-2005 Chair, Search Committee for the Oscar Belzer Endowed Chair in Dentistry, 1997 Executive Faculty Committee, 1995-Present Dean’s Advisory Group, 1995-Present School of Dentistry Alumni Advisory Board, 1995-present Research Committee, Chair, 1995-2011
Strategic Planning Committee, 1995-2001 PROFESSIONAL SERVICE National Committees/Service
Group Program Chair, Dental Materials Group International Association of Dental Research, 2014. Council on Dental Accreditation Site Visit Consultant- Chairperson-2013-present President Dental Materials Group, International Association for Dental Research, 2010-2011 President-elect Dental Materials Group, International Association for Dental Research, 2009-2010
Mark A. Latta, D.M.D.,M.S.
6
ACADEMIC BACKGROUND/SERVICE (Continued)
American Dental Association Evidence-Based Dentistry Champion Program, 2009-2010 Group Program Chair, Clinical Trials section, Dental Materials Group American Association of Dental Research, 2008. International Association for Dental Research, Treasurer, Dental Materials Group, 2004-2007. General Group Program Chair, Dental Materials Group, International Association of Dental Research, 2002. Group Program Chair, General Section, Dental Materials Group American Association of Dental Research, 1998. Group Program Chair, Adhesion Section, Dental Materials Group American Association of Dental Research, 1997. Group Program Chair, Adhesives and Bonding Section, Dental Materials Group International Association of Dental Research, 1996 Editorial Board, Operative Dentistry, 1996-Present Reviewer, Journal of Prosthodontics, Basic Science Section, 1995-2001 ISO/TC 106 International Standards US Delegate for Denture Base and Denture Teeth, Ottawa, Canada, October 10-14, 1994. American Association of Dental Research - Institutional Sponsor Representative, 1994 American Dental Association - American National Standards Institute, Subcommittee on Resin Denture Teeth MD 156.15 (Member) 1993- 1994 American Dental Association - American National Standards Institute, Subcommittee on Denture Base MD 156.12 (Observer Member) 1991- 1993 American Dental Association - American National Standards Institute, Subcommittee on Disposable Prophy Angles MD 156.85 (Chair) 1990-1994 American Dental Association - American National Standards Institute, Subcommittee on Dental Ceramics MD 156 (Observer) 1990-1994
State and Local Committees/Service
Omaha District Dental Society Director, 2010 Omaha District Dental Society, Nominating Committee, 2002 York County Dental Society, York, Pennsylvania - Executive Committee, 1986-1994 York County Dental Society, York, Pennsylvania - President, 1991 York County Dental Society, York, Pennsylvania - President Elect, 1990 York County Dental Society, York, Pennsylvania - Vice President, 1989 York County Dental Society, York, Pennsylvania - Secretary, 1986-1988 Professional Consultant for Infection Control Management, S.E. Lancaster Community Health Center, Lancaster Pennsylvania, 1986-1989 Committee on Dental Management of HTLV-III Infected Patients, York City Health Department, York, Pennsylvania, 1985-1988
Mark A. Latta, D.M.D.,M.S.
7
MEMBERSHIP IN PROFESSIONAL ORGANIZATIONS International College of Dentists, 2004-Present American College of Dentists, 1996-Present Nebraska Dental Association 1996-Present Omaha District Dental Society 1995-Present American Prosthodontic Society, 1990-2000 American Association for Dental Research, 1989-Present International Association for Dental Research, 1989-Present Chicago Dental Society, Associate Member, 1989-1996 California Dental Society, Associate Member, 1989-1993 Academy of General Dentistry, 1988-1999 American Dental Association, 1984-Present Pennsylvania Dental Association, 1984-1995 York County Dental Society, 1984-1995 American Association of Hospital Dentists, 1984-1989 SCHOLARSHIPS, HONORS AND AWARDS Fellow, International College of Dentists, 2004 OKU Honorary Dental Fraternity Elected April, 2000 Fellow, American College of Dentists, 1996 Fellowship, American Association of Hospital Dentistry, 1986 Honors in Oral Medicine, University of Pennsylvania, School of Dental Medicine, 1983 National Health Service Corps, Health Professional Scholarship, 1979-1983 Merit Award, Society of Applied Spectroscopy, Lafayette College, 1978 COMMUNITY SERVICE Elkhorn Community Theater, Secretary Board of Directors, 2006-2012 Congé Committee - Duchesne Academy, 2003, 2004 Special Smiles Volunteer, 2000-2002 St. Wenceslaus Parish Stewardship Committee, Secretary, 1998-Present St. Wenceslaus Athletic Club Girls Basketball Coach, 1999-2002. School Advisory Committee, St. Stephen the Martyr School, 1997 Committee for Computer Education, St. Joseph’s Elementary School, 1994 Medically Speaking, Cable Television Program, New Advances in Dental Materials, November 16, 1991 Strategic Planning Committee, Department of Dentistry, York Hospital, York, Pennsylvania, 1990-1991 Quality Assurance Committee, Department of Dentistry, York Hospital, York Pennsylvania, 1986-1992 Cancer Committee, York Hospital, York, Pennsylvania, 1985-1991
Mark A. Latta, D.M.D.,M.S.
8
RESEARCH ACTIVITIES Major Areas of Research Interest Dental Materials Removable Prosthodontics Methods Development for Physical Testing of Dental Materials Esthetic Restorative Dentistry Health Services Research
US Patent Number: 5,502,087 Dental Composition, Prosthesis and Method for Making Dental Prosthesis.. Tateosian LH, Shaffer, SE Latta MA.
US Patent Number: 5,554,665 Method and Dispenser for Making Dental Prosthesis Tateosian LH, Shaffer, SE Latta MA
US Patent Number 8,735,463 “Self-Healing Dental Composites and Related Methods.” Gross SM, Latta MA.
Patents Pending
US Provisional Serial No. 62/055,127. “Bondable Microcapsules and Surface Functionalized Fillers.” Gross SM, Latta, MA, McHale B. Filed 2014.
Mark A. Latta, D.M.D.,M.S.
9
RESEARCH ACTIVITIES (Continued)
USPTO 20130011453 “Buffered Microencapsulated Compositions and Methods.” Gross SM, Latta, MA, McHale B. Filed 2012. USPTO 20110082232 “Self Healing Dental Composites and Related Methods.” Gross SM, Latta MA. Filed 2010.
USPTO 20110071234 “Self Healing Dental Composites and Related Methods.” Gross SM, Latta MA. Filed 2010. USPTO 20100272764 “Microencapsulated Compositions and Methods for Tissue Mineralization.” Gross SM, Latta MA, McHale B. Filed 2009.
Grant Support
Latta, M.A. and Barkmeier W.W. (Principal Investigators) Localized wear of six restorative resins. Dentsply/DeTrey ($9,000) (April 1, 2014-September 5, 2014). Latta, M.A. and Barkmeier W.W. (Principal Investigators) Visiting Industrial Fellowship Program. Shofu Dental Company. ($125,000) October 1, 2013- September 30, 2014 Latta, M.A. (Principal Investigator) Shear Bond Strength of Multiple Dental Adhesive Formulations. Dentsply/DeTrey ($225,000) (September 1, 2012-August 1, 2014). Latta, M.A. (Principal Investigator) Localized wear and Generalized Wear prototype restorative resins. Dentsply/DeTrey ($175,000) (September 1, 2011-March 1, 2014). Latta, M.A. and Barkmeier W.W. (Principal Investigators) Localized wear of six restorative resins. 3M/ESPE ($13,000) (September 1, 2010-February1, 2011). Latta, M.A., (Principal Investigator) DiLorenzo, S., Cavel, W.T., Murdock, C.M., & Naughton, W., Barkmeier, W.W. (Co-Investigators). The Evaluation of Novamin containing prophy paste for the reduction of tooth hypersensitivity after dental prophylaxis. . Dentsply/Professional ($48,500) February 1, 2010-January 30, 2011. Latta, M.A. & Barkmeier W.W., (Principal Investigators) Shear Bond Strength to Dentin and Enamel of AdheSE One F. Ivoclar/Vivadent ($4,200) November 1, 2009-March 1, 2010.
Mark A. Latta, D.M.D.,M.S.
10
RESEARCH ACTIVITIES (Continued) Grants (Continued)
Galt, KA. (Principal Investigator) Norris J., Bradbury C., Bramble J.D., Crawford S., Drindcij A. Latta, M.A. Creighton Research Infrastructure Program to Achieve Sustainability Project. Agency for Healthcare Research and Quality (AHRQ) ($1,478,623) October 2009-2012. Latta, M.A., (Principal Investigator) DiLorenzo, S., Cavel, W.T., Murdock, C.M., & Naughton, W., Barkmeier, W.W. (Co-Investigators). Clinical Evaluation of a Self-Adhesive Restorative Material in Class V Cavities. Dentsply/Caulk($42,500) September 1, 2009-April-2012.
Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W., Barkmeier, W.W. (Co-Investigators). Clinical Evaluation of a Giomer Restorative material in Class V Cavities. Shofu ($62,500) July 1, 2009-April 1-2013. Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W., Barkmeier, W.W. (Co-Investigators). Clinical Evaluation of a New Self-etching Adhesive in Class V Cavities. Dentsply/Caulk ($35,500) October 15, 2008-May 1, 2010. Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W., Barkmeier, W.W. (Co-Investigators). Clinical Evaluation of a AdHese One version 2 in Class V Cavities. Ivoclar/Vivadent. ($41,500) September 30, 2008-February 20, 2011. Latta, M.A. & Barkmeier W.W., (Principal Investigators) Shear Bond Strength to Dentin and Enamel of a new self-etching adhesive system Kerr Dental ($1,200) September 20-30 2008. Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W., Barkmeier, W.W. (Co-Investigators). Clinical Evaluation of a Self-Adhesive Restorative Material. Pentron Clinical Technologies ($41,500) August 30, 2008-March 1, 2010. Latta, M.A. and Barkmeier W.W. (Principal Investigators) Localized wear of two nano composite resin. 3M/ESPE ($3,600) (June 1, 2008-September 1, 2008). Latta, M.A. & Barkmeier W.W., (Principal Investigators) Evaluating resin cement adhesion to zirconia with adhesion promoters. Shofu Dental ($10,200) April 1, 2008- October 15, 2008.
Mark A. Latta, D.M.D.,M.S.
11
RESEARCH ACTIVITIES (Continued) Grants (Continued)
Ayers F.J. (Director), Latta, M.A., Gould K (key contributors). ‘Jesuit Dental School Collaborative’: Pipeline, Profession and Practice: Community Based Dental Education Robert Wood Johnson Foundation ($200,000) March 1, 2008- June 30, 2010. Latta, M.A. and Barkmeier W.W. (Principal Investigators) A Blinded Round Robin test of the Localized and Generalized wear of nine restorative materials. Ivoclar/Vivadent. ($10,000) (September 30, 2007-May 30, 2008).
Latta, M.A. and Barkmeier W.W. (Principal Investigators) Localized and Generalized wear of three indirect resin systems. Dentsply/Prosthetics, ($12,000) (May 1-September 30, 2007). Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W. (Co-Investigators). Clinical Evaluation of a Single Component Adhesive in Class V Cavities. Shofu Dental. ($68,000) (May 1, 2007- May 25, 2010) Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W. (Co-Investigators). Clinical Evaluation of a Paint-on-Polish material. Dentsply/Caulk. ($58,000) (March 20, 2007- May 25, 2010) Latta, M.A. & Barkmeier W.W., (Principal Investigators) Shear Bond Strength to Dentin and Enamel of Self Etching Adhesive Materials. Shofu Dental ($7,200) December 1, 2006- February 1 2007. Augustine S.C., (Principal Investigator) Latta, M.A., Rule, A., Raynovich, W. (Co-Investigators). Development, delivery and assessment of a course for student pharmacists in terrorist threat, surveillance and emergency response training. Heath Future Foundation ($10,000) July 1, 2006- June 30, 2007. Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W., Barkmeier, W.W. (Co-Investigators). Clinical Evaluation of a New Self-etching Adhesive in Class V Cavities. Ivoclar/Vivadent. ($35,500) April 30, 2006-June 30-2008.
Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W. (Co-Investigators). Clinical Evaluation of a Self-Etching Adhesive in Class V Cavities. GC America ($30,500) (April 1, 2006- May 30, 2008).
Mark A. Latta, D.M.D.,M.S.
12
RESEARCH ACTIVITIES (Continued) Grants (Continued)
Latta, M.A. & Barkmeier W.W., (Principal Investigators) Shear Bond Strength to Dentin and Enamel of Self Etching Adhesive Materials After Thermocycling. Shofu Dental ($7,200) January 1, 2006- April 1 2007. Latta, M.A. & Barkmeier W.W., (Principal Investigators) Shear Bond Strength to Dentin and Enamel of Modified Glass Ionomer Restorative Materials. 3M/ESPE ($10,800) December 1, 2005- March 1 2006. Latta, M.A. & Barkmeier W.W., (Principal Investigators) Laboratory Evaluation of the Localized Wear of Resin Modified Glass Ionomer Restorative Materials. 3M/ESPE ($6,800) December 1, 2005- March 1 2006. Galt, K.A. (Principal Investigator) Latta, M.A., Rule, A., Augustine S.C., Raynovich, W. (Co-Investigators). Bioterrorism/Public Health Curricular Enhancement. Health Resources and Services Administration. ($129,000). (October 1, 2005- September 30, 2008) Latta, M.A., & Barkmeier, W.W., (Principal Investigators) Laboratory Evaluation of a tertiary Butanol solvent based adhesive. Technique Dentsply/DeTrey ($4,500) September 30, 2005- March 10, 2006. Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W. (Co-Investigators). Clinical Evaluation of a Composite Resin Posterior Restorative. Dentsply/Caulk. ($58,000) (May 1, 2005- May 25, 2008).
Latta, M.A. & Barkmeier W.W., (Principal Investigators) Laboratory Evaluation of the Localized Wear of Selected Nano-filled Composite Resins. 3M/ESPE ($9,800) May 1 2005- September 15, 2005.
Latta, M.A. & Barkmeier, W.W. (Principal Investigators) Selected Physical Characteristics of Glass Fiber Endodontic Posts. Pentron Clinical Technologies ($14,800) May1, 2005- October 30 -2005. Latta, M.A. & Barkmeier, W.W. (Principal Investigators) Morphologic and Chemical Characterization Of The Interface Between Restorative Materials and Enamel and Dentin Using Micro-Raman Spectroscopy. Health Future Foundation ($148,000) July 1, 2004- June 30 -2005. Latta, M.A., & Barkmeier, W.W., (Principal Investigators) Laboratory Evaluation of Layering and Repair Using the ‘C.E.B.L.’ Technique Dentsply/DeTrey ($10,500) May 30, 2004- February 10, 2005
Mark A. Latta, D.M.D.,M.S.
13
RESEARCH ACTIVITIES (Continued) Grants (Continued)
Latta, M.A. & Barkmeier W.W., (Principal Investigators) Laboratory Evaluation of the Localized Wear of Three Hybrid Composite Resins. Dentsply/Caulk ($3,600) May 1 2004- June 15, 2004. Latta, M.A. (Principal Investigator), Cavel, W.T., Naughton, W.T., DiLorenzo, S. Barkmeier, W.W. Clinical Evaluation of Three Impression Material Systems. Hereaus Kulzer ($23,000) May 2004-September 2005. Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W., Barkmeier, W.W. (Co-Investigators). Clinical Evaluation of a New Composite Resin for Class V Cavities. Ivoclar/Vivadent. ($30,500) (November 18, 2003- November 30, 2005). Latta, M.A. & Barkmeier W.W., (Principal Investigators) Laboratory Evaluation of a New Self-Adhesive Cement System. Ivoclar/Vivadent ($10,000) November 1, 2003- January 15, 2004. Latta, M.A. (Principal Investigator) Laboratory Evaluation of the shear bond strength of Rexillium to Dentin Using a New Cement System. Ivoclar/Vivadent ($2,400). June 1, 2003- July 15, 2003. Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W. (Co-Investigators). Clinical Evaluation of an Experimental Low Shrink Composite Resin in Posterior Teeth. Dentsply/Caulk. ($56,500) (May 1, 2003- May 25, 2005). Latta, M.A., (Principal Investigator) Laboratory Evaluation of the Degree of Double bond in Resins Using Halogen and LED Devices. Dentsply/DeTrey ($13,000). (April 30, 2003-October 1, 2003). Latta, M.A., (Principal Investigator) Laboratory Evaluation of the degree of conversion of Prime & Bond NT Adhesive Using a Halogen Light compared to an Experimental LED light. Dentsply/Caulk ($1,600). (April 1, 2003-May 1, 2003). Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W. (Co-Investigators). Clinical Evaluation of the Xeno III Adhesive System. Dentsply/Caulk. ($29,500) (October 25, 2002- May 25, 2004). Latta, M.A., Barkmeier, W.W. (Principal Investigators) Laboratory Evaluation of Localized Wear of Enamel Opposed by Selected Ceramics ($9,600). (October 1, 2002-January 20, 2003).
Mark A. Latta, D.M.D.,M.S.
14
RESEARCH ACTIVITIES (Continued) Grants (Continued)
Latta, M.A. (Principal Investigator) Localized wear of prototype composite resin formulas. Dentsply/DeTrey. ($3,300). August 1-21, 2002. LB 692 Tobacco Settlement Funds- recruitment award for NIH funded researcher. $20,000, renewed for July 2002-July 2003. Latta, M.A.., Barkmeier, W.W. (Principal Investigators) Laboratory Evaluation of the shear bond strength of composite resin to dentin and enamel of a new “self-etching adhesive system. Ivoclar/Vivadent- $4,800 (July 30, 2002- August 20, 2002).
Latta, M.A., Barkmeier, W.W. (Principal Investigators) Laboratory Evaluation of
Localized Wear of A Prototype Composite and Selected Commercial Composite Resins. 3M/ESPE. ($9,600). (July 1 2002-September 30, 2002). Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W. (Co-Investigators). Clinical Evaluation of a Flowable Composite Resin. Dentsply/Caulk. ($40,500) (September 21, 2001- September 23, 2003). Latta, M.A., (Principal Investigator) DiLorenzio, S., Cavel, W.T., Murdock, C.M., & Naughton, W. (Co-Investigators). Clinical Evaluation of a Self-Etching Adhesive. Dentsply/Caulk. ($29,500) (September 21, 2001- September 23, 2003). Latta, M.A., (Principal Investigator) Romito, L. & Heubner G. (Co-investigators). Attainable levels of Nitrous Oxide in Dental Offices That Have Implemented the ADA’s Exposure Control Recommendations, American Dental Association Health Foundation. $75,000 (August 1, 2001- April 1, 2003).
Latta, MA (Principal Investigator) & Barkmeier, W.W. (Co-investigator) Factors affecting the micro-strain of composite resin restorative dental materials. Health Future Foundation ($93,311.00) and Dentsply/Caulk ($57,000) total- $150,311.00. (July 1, 2001- June 30, 2002). Shear Bond Strength of Composite resin to Dentin and Enamel using self-etchin and conventional adhesive systems. Prinicpal Investigator. Dentsply/DeTrey. $4,800. November-December 2000.
Latta, M.A., Barkmeier, W.W. (Principal Investigators) Shear Bond Strength of composite resin to dentin and enamel using self-etching and conventional adhesive systems. Dentsply/DeTrey- $4,800.00 (October 7, 2000- November 30, 2000)
A Physical Property Evaluation of Four Compression Molded Denture Base Resins. Principal Investigator. Dentsply/Trubyte. $6,180. August –December 2000.
Mark A. Latta, D.M.D.,M.S.
15
RESEARCH ACTIVITIES (Continued) Grants (Continued)
A Simulated Clinical Evaluation of Megalloy Spherical Alloy Using Two Capsule Design. Principal Investigator. Dentsply/Caulk. $8,500. July- November 2000. Latta, M.A., (Principal Investigator) Naughton, W., Romito, L., & Higginbotham, D. (Co-investigators). Simulated Clinical Evaluation of Megalloy Spherical Alloy. Dentsply/Caulk- $8,250.00. (July 19, 2000- October 15, 2000). Latta, M.A.., Barkmeier, W.W. (Principal Investigators) Laboratory Evaluation of the shear bond strength of composite resin to dentin of a new “self-etching adhesive system. Dentsply/Caulk- $1,200.00 (June 6, 2000- July 7, 2000) Clinical Evaluation of a New Denture Base Material. Co-investigator. Dentsply/Trubyte. $38,600. March 2000- June 2002. Degree of conversion of selected light cured restoratives with the BluLaze™ Curing Unit. Principal Investigator. Premier Laser Inc. $2,500. January-February 2000. Correlation of Barcol Hardness and Degree of Double Bond Conversion. Principal Investigator. Dentsply/Caulk. $2,250. December, 1999-February 2000. Comparative study of enamel caries-like lesion following laser irradiation APF and visible light treatment. Co-investigator. Dental/Medical Diagnostic Systems Inc., $2,900. July-September 1999. Localized wear of R-30 composite resin, Dentsply/Caulk, Principal Investigator, $1,000 May 1999. Localized wear of 4 composite resins against enamel, 3M Dental Products, Principal Investigator, $4,000, May-July 1999. A Laboratory Evaluation of the Adhesive Properties of KBN for Porcelain Repair, Kuraray Co. Ltd., Principal Investigator, $3,300, March 1999-July, 1999. Clinical Evaluation of the Experimental Composite for Class III, V and Class II Restorations, Dentsply International/Caulk Division, Principal Investigator, $27,950, December 1998- March 2001.
Clinical Evaluation of an Experimental Composite for Class II Restorations, 3M Dental Products Division, Principal Investigator, $54,950, November 1998- March 2003.
RESEARCH ACTIVITIES
Mark A. Latta, D.M.D.,M.S.
16
(Continued) Grants (Continued)
Clinical Evaluation of Super Maxxim Indirect Inlay Material, Dentsply International/Ceramco Division, Principal Investigator, $26,950, October 1998- May 2001. In-vitro comparison of the abrasiveness of selected dentifrices against tooth structure and restorative dental materials, Unilever Inc. Principal Investigator, $26,000, October 1998-August 1999. Clinical Evaluation of a Compomer Luting Cement, Dentsply International/Caulk Division, Principal Investigator, $7,300, May 1998-November 1998. A Laboratory Evaluation of the KBN Adhesive System, Kuraray Co. Ltd. Principal Investigator, $4,660, March -August 1998. A Laboratory Evaluation of PN-200, A Fluoride Releasing Adhesive Cement, Kuraray Co. Ltd. Principal Investigator, $11,480, March -August 1998. Clinical Evaluation of the K-0100 Primer with Prime & Bond 2.1 in Class V Cavities, Dentsply International/DeTrey Division, Principal Investigator, $17,184, March 1998- March 2001. Clinical Evaluation of the Experimental Compomer K-95 for Class I and Class II Restorations, Dentsply International/DeTrey Division, Principal Investigator, $27,950, March 1998- March 2001. A Clinical Evaluation of A Hydrophillic Impression Material System, Dentsply International/ Caulk, Principal Investigator, $19,400, January- April 1998. A Clinical Evaluation of a New Compomer Material for Class V Restorations, 3M Company, Principal Investigator $24,400, May 1997-July 2000. A Clinical Evaluation of Three Impression Material Systems, Dentsply International/Caulk, Principal Investigator $19,420, April-May 1997. A Laboratory Evaluation of the Solid Bond Adhesive System, Heraeus Kulzer Dental Products Division, Principal Investigator, $6,370, April 1997
Clinical Evaluation of a New Compomer Material for Class V Restorations. ESPE Inc., Principal Investigator, $15,780, February 1997-February 2000.
RESEARCH ACTIVITIES
Mark A. Latta, D.M.D.,M.S.
17
(Continued) Grants (Continued)
Clinical Evaluation of a Silicone Based Soft Denture Liner, Dentsply/Trubyte, Co-investigator, $14,580, February 1997-February 1999. Clinical Evaluation of Dyract AP the Prime and Bond 2.1 Adhesive System in Class V lesions, Dentsply International/DeTrey Division, Principal Investigator, $6,700.00, September 1996-September 1998.
Laboratory Study of the Adhesive Properties of Prototype Metal Bonding Primer, Kuraray Co. Ltd., Principal Investigator, $11,120, September 1996- January 1997 Laboratory Study of the Shear Bond Strength of Clearfil AP-X to enamel using a Variety of Enamel Conditioning Techniques, Kuraray Co. Ltd., Principal Investigator, $3,840, August 1996-January 1997. Laboratory Study of the Adhesive Properties of KB-1300 to Various Dental Substrates Kuraray Co. Ltd., Principal Investigator, $9,120, August 1996-January 1997 A Laboratory Evaluation of the Microleakage of an Experimental Adhesive System, 3M Dental Products, Principal Investigator, $1,800, August 1996.
A Laboratory Evaluation of the Shear Bond Strength of Z-100 Composite To Enamel and Dentin Using an Experimental Adhesive System, 3M Dental Products, Principal Investigator, $1,920, August 1996.
Dental Technology Assessment Center, Health Future Foundation Program Award, Principal Investigator, $315,000, June 1996-June 2000. Clinical Evaluation of the Prime and Bond 2.1 Adhesive System, Dentsply International/Caulk Division, Principal Investigator, $ 40,500.00, June 1996-September 1999.
Clinical Evaluation of Dyract Cem and Prime and Bond 2.1 for Luting Spectrum TPH Inlays, Dentsply International/DeTrey Division, Principal Investigator $20,922 June 1996-September 1997.
A Laboratory Evaluation of Dyract Cem and Prime and Bond 2.1 for Luting Spectrum TPH Inlays and Ceramic Crowns, $4,320, June 1996-June 1997. Laboratory Evaluation of the Shear Bond Strength of Composite Resin to Dentin using TenureQuik with fluoride and Prime and Bond, Den-Mat Inc. Principal Investigator, $1,040 June 1996.
RESEARCH ACTIVITIES
Mark A. Latta, D.M.D.,M.S.
18
(Continued) Grants (Continued)
Clinical Evaluation of Light Cured Dyract Cem and Prime and Bond 2.1 for Luting Spectrum TPH Inlays, Dentsply International/DeTrey Division, Principal Investigator $24,922 June 1996-September 1997. Laboratory Evaluation of the Shear Bond Strength of Composite Resin to Dentin Using Permaquik Adhesive and Prime and Bond, Ultradent Products Inc., Principal Investigator, $960, May 1996. Laboratory Evaluation of the Microleakage of a Prototype Adhesive System. ESPE America, Principal Investigator, $5,520.00 January-May 1996.
Laboratory Study of the Shear Bond Strength of Rexillium III to Desensitized Dentin, Kuraray Co. Ltd., Principal Investigator, $1,920, November 1995-January, 1996. Laboratory Study of the Microleakage of Provisional Crowns Cemented to Desensitized Dentin, Kuraray Co. Ltd., Principal Investigator, $5,760, November 1995-January 1996.
Clinical Evaluation of a New All-Ceramic Crown Material, Ceramco Division of Dentsply International, Principal Investigator, $40,968, October 1995-December 2000. Laboratory Evaluation of the Shear Bond Strength of Composite Resin to Dentin and Enamel Using Permaquik Adhesive, Ultradent Products Inc., Principal Investigator, $1,920, October 1995-November 1995.
Laboratory Evaluation of Surface Treatments for Bonding a Resin Cement to a New Glass-Ceramic Restorative Material, Ceramco Division of Dentsply International, Principal Investigator, $5,760, September 1995-October 1995.
Clinical Evaluation of a New Adhesive System, Bisco Inc. Co-investigator, $21,768 September 1995-September 1998.
Laboratory Evaluation of the Shear Bond Strength of Composite Resin to Dentin and Enamel Using Experimental Primer/Adhesive Materials, Caulk Division of Dentsply International, Principal Investigator, $5,760, July 1995-December 1995.
RESEARCH ACTIVITIES
Mark A. Latta, D.M.D.,M.S.
19
(Continued)
Thesis
Latta, M.A. The Effectiveness of Using Low Tg Oligomers to toughen Urethane Dimethacrylate Denture Base Resins. University of Maryland Baltimore College of Dental Surgery, 1995.
Publications Sherma, J., Latta, M.A. Reversed-phase thin-layer chromatography of chloroplast pigments on chemically treated C18 plates. Journal of Chromatography, (1978) 154:73-75. Latta, M.A., Tateosian, L.H. Comparison of Two Light Cured Reline Systems. Journal of Clinical Dentistry, (1989) 4: 116-120. Latta, M.A. The Continuing Ceramic Evolution: Dicor Plus and Dicor Castable Ceramic. Esthetic Dentistry Update, (1990) 1; 2: 26-30. Barkmeier, W.W., Latta, M.A. Shear Bond Strength of Dicor using Resin Adhesives and Light Activated Cement. Journal of Esthetic Dentistry, (1991) 3;2: 95-99. Barkmeier, W.W., Jabro, M.H., Latta, M.A. Scanning Electron Microscopic Analysis of the Local Effects of a Periodontal Scaling Gel on Selected Surfaces. Journal of Clinical Dentistry, (1992) 3:39-42. Jabro M.H., Barkmeier W.W., Latta M.A.: A clinical evaluation of the Effects of a Periodontal Scaling Gel. Journal of Clinical Dentistry, (1992) 3:43-46. Latta, M.A. Fabrication of Visible Light Cured Provisional Restorations. Esthetic Dentistry Update, (1992) 3;5: 123-125. Barnes, D.M., Blank, L.W., Gingell, J.C., Latta, M.A. Clinical Evaluation of Castable Ceramic Veneers. Journal of Esthetic Dentistry, (1992) 4:(supplement) 21-25.
Douglas, W.H., DeLong, R., Pintado, M.R., Latta, M.A. Wear Rates of Artificial Denture Teeth Opposed by Natural Dentition. Journal of Clinical Dentistry, (1993) 4;2: 43-47. Latta, M.A., Barkmeier, W.W. Bond Strength of a Resin Cement to a post-cured Composite Inlay Material. Journal of Prosthetic Dentistry. (1994) 72:189-93.
RESEARCH ACTIVITIES
Mark A. Latta, D.M.D.,M.S.
20
(Continued) Publications (Continued)
Barnes, D. M., Latta, M. A. Modern All-Ceramic Restorative Materials for Crowns: A Review. Esthetic Dentistry Update, (1994) 5;5: 111-114.
Kelsey, W.P, Cavel, W.T., Blankenau, R.J., Barkmeier, W.W., Wilwerding, T.M., Latta, M.A. 4-year clinical study of castable ceramic crowns. American Journal of Dentistry 8:259-262 (1995).
Schvaneveldt, S.L., Rozmajzl, W.F., Barkmeier, W.W., Latta, M.A. Shear bond Strength of an Adhesive Cured under Nitrogen. American Journal of Dentistry 9:4, 157-160 (1996).
Mandras, R.S., Thurmond, J.W. Latta, M.A., Matranga, L.F., Kildee, J.M., Barkmeier, W.W., Three Year Clinical Evaluation of the Clearfil liner Bond System. Operative Dentistry 22:6, 266-270. (1997).
Kelsey, W.P., Latta, M.A. and Blankenau, R.J. Effect of provisional restorations on dentin bond strengths of resin cements. American Journal of Dentistry, 11:67-70 (1998). Barkmeier, W.W., Hamesfahr, P.D. and Latta, M.A. Bond Strength of Composite to Enamel and Dentin Using Prime and Bond 2.1. Operative Dentistry 24:1, 51-56 (1999). Ellis, R.W., Latta, M.A., Westerman, G.H. Effect of air abrasion and acid etching on sealant retention: an in vitro study. Pediatic Dentistry 21:316-319 (1999). Kelsey,W.P., Latta, M.A., Shaddy, R.S., Stanislav, C.M. Physical Properties of Three Packable Resin-Composite Materials. Operative Dentistry 25:331-335 (2000). Kelsey, W.P., Latta, M.A., Stanislav, C.M., Shaddy, R.S. Comparison of composite resin-to-porcelain bond strength with three adhesives. Journal of the Academy of General Dentistry 48(4):418-421 (2000). Latta, M.A., Barkmeier, W.W., Approaches for intra-oral repair of Ceramic Restorations. Compendium of Continuing Education in Dentistry. 21(8),635-646 (2000).
RESEARCH ACTIVITIES
Mark A. Latta, D.M.D.,M.S.
21
(Continued) Publications (Continued)
Barkmeier, W.W., Latta, M.A. Laboratory Evaluation of a metal priming agent for adhesive bonding. Quintessence International 31:749-752 (2000).
Barkmeier, W.W., Latta, M.A., Wilwerding, T.M., Blake S.M. Wear Assessment of High Density and Conventional Composite Restorative Materials. Operative Dentistry 26:152-156 (2001).
Latta, M.A., Barkmeier W.W., Wilwerding, T.M., Blake S.M., Localized Wear of Compomer Restorative Materials. American Journal of Dentistry 14: 238-240 (2001).
Latta, M.A. Assessment of factors affecting models of dental education. Operative Dentistry ; Supplement 6: 67-74 (2001). Brodin P, Bennett I, Appleton J, Bonta Y, Feher E, Fiehn NE, Greenspan D, Hjorting-Hansen E, Latta M, O’Connell B, Sidlauskas A, Skaleric U. Ensuring Research Productivity in the future faculty. European Journal of Dental Education Oct; 6 Supplement 3: 97-106 (2002) Westerman G.H., Ellis, R.W., Latta, M.A. & Powell G.L. An In vitro Study of Enamel Surface Microhardness Following Argon Laser Irradiation and Acidulated Phoshate Fluoride Treatment. Pediatric Dentistry 25:497-500 (2003) Shaddy R.S., Latta, M.A., Goren M. The Effect of Salivary Contamination on Adhesive Shear Bond Strength. Journal of Practical Hygiene. 12(5): 27-28 (2003) Hagge M.S., DiLorenzo S.C., Lindemuth J.S., Latta, M.A., Smith J.W. Use of Yellow Food Wrap to Retard Composite resin Polymerization. Journal of Esthetic and Restorative Dentistry 15: 370-376 (2003)
Janda, R., Roulet, J-F., Kaminsky, M, Steffen, G., Latta, M.A. Colour Stabilty of resin matrix restorative materials as a function of light activation. European Journal of Oral Sciences. 112:280-285, (2004) Barkmeier, W.W., Latta, M.A., Erickson, R.L. Lambrechts, P. Comparison of Laboratory and Clinical Wear Rates of Resin Composites. Quintessence International; 35:269-274 (2004)
Kelsey, W.P., Latta, M.A., Barkmeier, W.W. Hammesfahr. P.H. & Jefferies, S.R. An accelerated in-vitro model for adhesive testing: a pilot study. American Journal of Dentistry. 17:323-326 (2004)
RESEARCH ACTIVITIES
Mark A. Latta, D.M.D.,M.S.
22
(Continued) Publications (Continued)
Naughton, W.T., Latta, M.A. Bond strength of composite to dentin using self-etching adhesive systems. Quintessence International. 36(4): 41-44. (2005) Kelsey, W.P, Latta, M.A. Vargas, M.A., Carrol. L.R. & Armstrong S.R. Microtensile bond strength of total-etch adhesives to the enamel walls of Class V cavities. American Journal of Dentistry 18:37-40. (2005)
Blank, J.T., Latta, M.A. Composite Resin Layering and Placement Techniques: Case Presentation and Scientific Evaluation. Practical Periodontics and Esthetic Dentistry 17(6): A-F (2005). Latta, M.A., Kelsey, W.P. Murdock, C.M. Effects of the Adhesive Liner and Provisional Cement on Bond Strength of nickel/chrome/beryllium alloy cemented to Dentin. Quintessence International 36:817-823 (2005).
Janda, R., Roulet, J.-F., Steffin, M., Latta, M., Rüttermann, St.: Colour stability of resin based filling materials after aging when cured with plasma or halogen light. European Journal of Oral Sciences 113:251-257 (2005).
Meng T.R., Latta M.A. Physical Properties of Four Acrylic Denture Base
Resins. Journal of Contemporary Dental Practice November (6)4:093-100 (2005).
Janda, R., Roulet, J.-F., Latta, M., Rüttermann, St.: The Effects of thermocycling
on the flexural strength and flexural modulus of modern resin-based filling materials. Dental Materials 2006; 22(12): 1103-1108. Latta M.A., Kelsey W.P III, Kelsey W.P.V. Effect of Polymerization Mode of Adhesive and Cement on Shear Bond Strength to Dentin. American Journal of Dentistry 2006; 19:96-100. Kimmes NS, Olson TL, Shaddy RS, Latta MA. Effect of ViscoStat and ViscoStat Plus on composite shear bond strength in the presence and absence of blood. J Adhes Dent. 2006 Dec;8(6):363-6. Latta, M.A. Shear Bond Strength and Physicochemical Interactions of XP Bond. Journal of Adhesive Dentistry 2007; 9 supplement 2: 1-4.
Janda, R., Roulet, J.-F., Latta, M.,Kaminsky, M. St.: Effect of exponential polymerization on color stability of resin-based filling materials. Dental Materials 2007; 23: 696-704.
RESEARCH ACTIVITIES
Mark A. Latta, D.M.D.,M.S.
23
(Continued) Publications (Continued)
Janda, R., Roulet, J.-F., Latta, M.,Rutterman S. Water sorption and solubility of contemporary resin based filling materials. J Biomed Mater Res B Appl Biomater. 2007; 82(2): 545-551
Janda R. Roulet JF, Latta M, Damerau G. Spark Erosion as a metal-resin bonding system. Dent Mater 2007; 23(2) 193-197.
Simulation of Resin Composites and Relationship to Clinical Wear. Oper Dent, 2008; 33(2): 173-178.
Latta, M.A. Clinical Perspectives on Current Dental Adhesives. Comp Cont Dent
Ed, 2008 ( in press) Kelsey WP III, Latta M.A., Kelsey W.P. A comparison of the retention of three
endodontic dowel treatments following different surface treatments. J Prosthodont. 2008; 17(4):269-73.
Barkmeier W.W.,, Erickson R.L., Latta M.A. Fatigue limits of enamel bonds with moist and dry techniques. Dent Mater. 2009;25(12):1527-31.
Barkmeier W.W., Erickson R.L., Kimmes N.S., Latta M.A., Wilwerding T.M. The role of etching in bonding to enamel: a comparison of self-etching and etch-and-rinse adhesive systems. Dent Mater. 2009;25(11):1459-67.
Barkmeier W.W., Latta M.A., Erickson R.L., Wilwerding T.M. Effect of enamel etching time on roughness and bond strength. Oper Dent. 2009;34(2):217-22.
Latta M .A., Naughton W.T., Scanlon C.F, Bond strength of composite to dentin and enamel using self-etching adhesive systems. Gen Dent. 2009;57(3):257-9.
Kimmes, N.S., Barkmeier, W.W., Erickson R.L., Latta, M.A. Adhesive Bond Strengths to Enamel and Dentin Using Recommended and Extended Treatment Times. Oper Dent 2010; 35(1):112-19.
Wertzburger, B.E., Steere, J.T., Pfeifer, R.M., Nensel, M.A., Latta, M.A., Gross, S.M. Physical Characterization of a Self-Healing Dental Restorative Material. J Applied Polymer Sci 2010; 118: 428-434. Heintze S.D., Barkmeier, W.W., Latta. M.A. Rousson, V. Round robin test: Wear of nine dental restorative materials in six different wear simulators-Supplement to the round robin test of 2005. Dent Mater 2011; 27: e1-e9.
RESEARCH ACTIVITIES
Mark A. Latta, D.M.D.,M.S.
24
(Continued) Publications (Continued)
Tamura Y, Tsubota K, Otsuka E, Endo H, Takubo C, Miyazaki M, Latta MA. Dentin bonding: influence of bonded surface area and crosshead speed on bond strength. Dent Mater 2011;30(2):206-1.
Gemalmaz D, Pameijer CH, Latta M, Kuybulu F, Alcan T. In vivo disintegration of four different luting agents. Int J Dent. 2012;831-38. Davidson MT, Greving TA, McHale WA, Latta MA, Gross SM. Ion permeable
microcapsules for the release of biologically available ions for remineralization. J Biomed Mater Res A. 2012;100(3):665-72. Barkmeier WW, Erickson RI, Latta MA, Wilwerding TM. Wear rates of resin composites. Oper Dent. 2013 Mar-Apr;38(2):226-33. Sumino N, Tsubota K, Takamizawa T, Shiratsuchi K, Miyazaki M, Latta MA. Comparison of the wear and flexural characteristics of flowable resin composites for posterior lesions. Acta Odontol Scand. 2013 May-Jul;71(3-4):820-7. Falbo MM, Elassal P, Greving TA, McHale WA, Latta MA, Gross SM. The control of phosphate ion release from ion permeable microcapsules formulated into rosin varnish and resin glaze. Dent Mater. 2013 Jul;29(7):804-13.
Books, Book Chapters Falbo,M, Greving, TA,Schmidt, MQ, Davidson, MT, McHale, WA, Latta,MA, Gross SM.. “Ion Permeable Microcapsules: The Effect of Counterions, Temperature and Concentration.” Invited Book Chapter for the ACS Symposium Book Series: Polymer for Personal Care Products. (2013) Latta, M.A., Naughton, W.T. Bonding and Curing Considerations for Small and Hidden Caries. In: Dental Clinics of North America 49: 889-904 (2005). Latta, M.A., Janda, R, Groten, M. “Clinical Investigations of Medical Devices In Dentistry” Quintessence Publishing Co. Inc. Chicago IL. USA. (2004). Latta, M.A. and Barkmeier, W.W. Dental Adhesives in Contemporary Restorative Dentistry. In: Dental Clinics of North America, 42:567-577 (1998).
Mark A. Latta, D.M.D.,M.S.
25
RESEARCH ACTIVITIES Abstracts More than 200 research abstracts have been presented at regional, national and international meetings. A complete list is available on request. PROFESSIONAL PRESENTATIONS
More than 175 professional presentations have been given in national and international forums. This includes abstracts, invited lectures, lecture and hands-on continuing education courses and keynote addresses. A full list is available on request. Selected highlights from the last five years are listed below: Lecture: Modern Concepts in Adhesive Restorative Dentistry Tokyo Medical and Dental College May 24, 2009 Tokyo, Japan Lecture: Modern Concepts in Adhesive Restorative Dentistry Tokyo Medical and Dental College May 24, 2009 Lecture: Modern Concepts in Adhesive Restorative Dentistry Nihon University May 26, 2009 Tokyo, Japan Lecture: Modern Concepts in Adhesive Restorative Dentistry:
Commercial Challenges Shofu Dental Corporation May 27, 2009 Kyoto, Japan Continuing Education: New Adhesives, resin restoratives and curing devices Colorado Academy of Cosmetic Dentistry Denver, Colorado February 18, 2010 PROFESSIONAL PRESENTATIONS
Mark A. Latta, D.M.D.,M.S.
26
(Continued) Abstract: Fatigue Limits of Enamel Bonds Using Single and Multi-
Step Adhesives American Association of Dental Research Annual Session Washington, D.C. March 3, 2010 Continuing Education: Miracles and Myths of High Strength Ceramic
Restorations Creighton Spring Dental Assembly Omaha Nebraska April 22, 2010 Continuing Education: New Adhesives, resin restoratives and curing devices. Nebraska Dental Association annual meeting Lincoln, Nebraska April 24, 2010 Continuing Education: New Adhesives, resin restoratives and curing devices. Society of Native American Dentists annual meeting Omaha, Nebraska May 20, 2010 Invited Lecture: Etiology and Treatment of Class V lesions Shofu International Symposium 2010 Barcelona, Spain July 13, 2010 Abstract: Effect of Residual Moisture on Dentin Bond Strength International Association of Dental Research Annual Session Barcleona, Spain July 14, 2010 PROFESSIONAL PRESENTATIONS
Mark A. Latta, D.M.D.,M.S.
27
(Continued) Continuing Education: Miracles and myths of restorative materials. California Dental Association Fall Meeting San Francisco, California September 10, 2010 Invited Lecture: University/Corporate Interactions in Research Dentsply Summit- Educators Conference Denver, Colorado September 27, 2010 Continuing Education: Modern restorative material solutions for clinical
dilemmas. New York University New York, New York December 1, 2010 Abstract: In-vitro Wear of Glass Ionomer Restorative Systems International Association of Dental Research Annual Session San Diego, California March 18, 2011 Continuing Education: Miracles and myths of restorative materials. Ohio Academy of Orafacial Therapy Cleveland Ohio March 16, 2012 Abstract: Phosphate Ion Release From Ion-permeable
Microcapsules in Varnish Formulations American Association of Dental Research Annual Session Tampa, Florida March 23, 2012 PROFESSIONAL PRESENTATIONS
Mark A. Latta, D.M.D.,M.S.
28
(Continued) Invited Lecture: SPRG Technology in Restorative Dentistry Asian Academy of Cosmetic Dentistry Sapporo, Japan July 10, 2012 Invited Lecture: Modern Dental Adhesives in Restorative Dentistry Nihon University Department of Operative Dentistry Tokyo, Japan July 8, 2012 Continuing Education: When does state-of-the-art become standard of care? Greater Kansas City Dental Society Kansas City, Missouri February 7, 2013 Continuing Education: Miracles and Myths of Restorative Materials and Curing
Devices Canadian Dental Society-Pacific Dental Conference Vancouver, Canada March 7, 2013 Abstract: Clinical Evaluation of 2Restorative Systems in Class V
Cavities International Association of Dental Research Annual Session Seattle, Washington March 21, 2013 Continuing Education: Linking research and clinical practice in restorative
dentistry American Academy of Cosmetic Dentistry Seattle, Washington April 25, 2013 PROFESSIONAL PRESENTATIONS
Mark A. Latta, D.M.D.,M.S.
29
(Continued) Abstract: Effect of Dentin Moisture on Bonding of “Universal”
adhesives American/Canadain Association of Dental Research Annual Session Charlotte, North Caroline\a March 21, 2014 Continuing Education: When does state-of-the-art become standard of care? Pacific Northwest Dental Conference Seattle, Washington June 17, 2014
