CURRICULUM VITAE Michael Lawrence Pinedo Personal Data Birth: Curacao, Netherlands Antilles. Status: Married, three children. Education Ph.D. in Operations Research, University of California, Berkeley June 1978, Department of Industrial Engineering and Operations Research. M.S. in Operations Research, University of California, Berkeley, December 1975, Department of Industrial Engineering and Operations Research. Ir. in Mechanical Engineering (Ir. is equivalent to M.S.), Delft University of Technology, the Netherlands, June 1973. Employment Julius Schlesinger Professor of Operations Management, Stern School of Business, New York University, 2002 - present, New York, NY. Chairperson, Department of Information, Operations and Management Sci- ences, Stern School of Business, New York University, 2005 - 2013, New York, NY. Deputy Chair, Department of Information, Operations and Management Sciences, Stern School of Business, New York University, 2001 - 2005, New York, NY. Chairperson, Department of Operations Management, Stern School of Busi- ness, New York University, 2000 - 2001, New York, NY. 1
Transcript
CURRICULUM VITAE
Michael Lawrence Pinedo
Personal Data
Birth: Curacao, Netherlands Antilles.Status: Married, three children.
Education
Ph.D. in Operations Research, University of California, Berkeley June 1978,Department of Industrial Engineering and Operations Research.
M.S. in Operations Research, University of California, Berkeley, December1975, Department of Industrial Engineering and Operations Research.
Ir. in Mechanical Engineering (Ir. is equivalent to M.S.), Delft Universityof Technology, the Netherlands, June 1973.
Employment
Julius Schlesinger Professor of Operations Management, Stern School ofBusiness, New York University, 2002 - present, New York, NY.
Chairperson, Department of Information, Operations and Management Sci-ences, Stern School of Business, New York University, 2005 - 2013, NewYork, NY.
Deputy Chair, Department of Information, Operations and ManagementSciences, Stern School of Business, New York University, 2001 - 2005, NewYork, NY.
Chairperson, Department of Operations Management, Stern School of Busi-ness, New York University, 2000 - 2001, New York, NY.
1
Research Professor, New York University, Stern School of Business, 1997 -2002, New York, NY.
Visiting Professor, Hong Kong University of Science and Technology, De-partment of Industrial Engineering, June-July, 1997, Hong Kong.
Professor, Columbia University, Department of Industrial Engineering andOperations Research, 1988 - 1997, New York, NY.
Associate Professor, Columbia University, Department of Industrial Engi-neering and Operations Research, 1984 - 1988, New York, NY.
Director, Prudential Insurance Company of America, Real Estate Invest-ment Department, Newark Corporate Office, 1985 - 1986, Newark, NJ.
Assistant Professor, Columbia University, Department of Industrial Engi-neering and Operations Research, 1982 - 1984, New York, NY.
Assistant Professor, Georgia Insitute of Technology, Department of Indus-trial and Systems Engineering, 1980 - 1982, Atlanta, GA.
Investigador I-2, Instituto Venezolano de Investigaciones Cientificas (IVIC),Laboratorio de Sistemas, 1978 - 1980, Caracas, Venezuela.
Visiting Professor, Instituto de Estudios Superiores de Administracion (IESA),1978 - 1980, Caracas, Venezuela.
Design Specialist, Hitachi Zosen, Engine Design Division, Innoshima Ship-yard, August 1973 - November 1973, Innoshima, Japan.
Memberships of Boards and Professional Societies
Member Supervisory Board of Erasmus Research Institute of Management(ERIM), Rotterdam School of Management, 2013-present.Member Advisory Board (Kuratorium), Frankfurt School of Finance andManagement, 2014-present
2
Operations Research Society of America (ORSA), 1980 - 1987, 1992 - presentProduction and Operations Management Society (POMS), 2000 - presentAmerican Risk and Insurance Association (ARIA), 1979 - 1983American Institute of Industrial Engineers (IIE), 1982 - 1988.
IFORS Distinguished Lecturer (Rhodes, Greece, 2004)Fellow INFORMS (inducted 2009).Fellow POMS (inducted 2010).Changjiang Scholar (Ministry of Education of China, 2012)
Patent
US Patent 7590594, M. Gunewardena, W.R. Egan, and M. Pinedo (2009),”Method, Software Program and System for Ranking Relative Risks of aPlurality of Transactions”, Goldman Sachs.
Alcan, Planning and Scheduling Projects, 2003 - 2005.
Bender Management Consultants, System Design and Development Projects,1995 - 1998.
International Paper, Productivity Improvement Projects in Various Con-verting Facilities and Primary Mills, l986 - 1995.
3
Xerox, Productivity Improvement Projects in Assembly Facilities and PrintedCircuit Board Manufacturing Facilities, 1985 - 1992.
Himont, Evaluation of Scheduling Systems Development, 1991.
Siemens, Evaluation of Scheduling Systems Development for SemiconductorManufacturing, 1991.
Merck & Co., Evaluation of Scheduling Systems Development, 1990.
Sperry Corp., Warehouse Layout and Design Project, 1983.
Editorial Activities
Member of Editorial Board, Annals of Operations Research, 2015-presentSenior Editor, MSOM, 2003 - 2014.Department Editor, POM, 2005 - present.Associate Editor, Journal of Operational Risk, 2006 - present.Associate Editor, Management Science, 2003 - 2014.Associate Editor, Naval Research Logistics, 2003 - present.Editor, Journal of Scheduling, 1997 - present.Area Editor, POM, 1998 - 2005.Member of Editorial Board, MSOM, 1996 - 2001.Editor at Large, Interfaces, 1996 - 2004.Associate Editor, Naval Research Logistics, 1983 - 2000.Associate Editor, Telecommunications Systems, 1994 - 1998.Area Editor, Operations Research (Stochastic Processes), 1992 - 1995.Department Editor, IIE Scheduling and Logistics, 1993 - 1997.Associate Editor, Institute of Industrial Engineers, 1989 - 1992.Associate Editor, Operations Research, 1983 - 1992.
Research Grants
National Science Foundation Grant CMMI-0969755 ”Collaborative Proposal:Container Scheduling - Complexity, Algorithms and Heuristics”, (with Co-PI Joseph Leung (New Jersey Institute of Technology)) $ 349,000; June 1,2010 - May 31, 2013.
4
National Science Foundation Grant DMI-0555999 ”Collaborative Proposal:A Framework for Integrating Production Scheduling with Inventory Con-trol”, (with Jiawei Zhang (NYU) and Co-PI Joseph Leung (New JerseyInstitute of Technology)) $ 240,000; June 1, 2006 - May 31, 2009.
National Science Foundation Grant DMI-0245603 ”Collaborative Research:Scheduling Multiple Product Types on Parallel Resources”, (with Co-PIJoseph Leung (New Jersey Institute of Technology)) $ 300,000; June 1, 2003- May 31, 2006.
National Science Foundation Grant DMI-0200406, ”Collaborative Research:Resource and Demand Allocation in Dynamic Environments”, (with Co-PIsXiuli Chao (North Carolina State University) and Sridhar Seshadri (NewYork University)) $ 305,000; August 15, 2002 - July 31, 2005.
National Science Foundation Grant DMII-95-22938, “Generalized Job ShopModels with Multiple Objectives”, $ 210,000; January 1, 1996 - December31, 1998.
U.S. Air Force Rome Laboratory Grant No. F30602-95-1-0032, “InteractiveOptimization in Object Oriented Scheduling Systems”, (with Co-PI XiuliChao (NJIT) $ 253,984; August 1, 1995 - July 30, 1998.
National Science Foundation Grant DDM-92-25062, “Scheduling with Mul-tiple Objectives and Machine Availability Constraints” , $ 195,000; July1993 - July 1996.
National Science Foundation Grant ECS , “Structural Properties and Algo-rithms for Flow Line Scheduling”, $ 120,000; June 1991 - June 1994.
National Science Foundation Grant ECS , “Sequencing of Flexible Assem-bly Systems with Blocking”, $ 270,000; (with S.T. McCormick), June 1987- June 1991.
National Science Foundation Grant CDR-85-11111 Engineering ResearchCenter (Center for Telecommunications Research, (CTR)), (with 18 otherPrincipal Investigators), 1985 - 1995.
National Science Foundation Grant ECS- 83-12237, “Stochastic Scheduling:
5
Precedence Constraints and Variability”, $ 60,000; June 1984 - December1986.
National Science Foundation Grant ECS-81-15344, “Stochastic Scheduling”,$ 44,000; January 1982 - June 1984.
Support from Industry for Doctoral Research
$ 15,000 (2006) International Business Machines.$ 12,000 (1995) International Paper Foundation.$ 30,000 (1994) Paragon Management Systems.$ 13,000 (1994) International Paper Foundation.$ 13,000 (1993) International Paper Foundation.$ 18,000 (1992) Siemens Corporate Research, Inc.$ 10,000 (1992) Philips Laboratories.$ 10,000 (1992) International Paper Foundation.$ 10,000 (1991) International Paper Foundation.$ 10,000 (1990) International Paper Foundation.$ 55,000 (1990) Siemens Corporate Research, Inc.$ 10,000 (1989) International Paper Foundation.$ 20,000 (1989) Philips Laboratories.$ 19,000 (1988) Xerox Foundation.$ 10,000 (1988) International Paper Foundation.$ 19,000 (1987) Xerox Foundation.$ 19,000 (1986) Xerox Foundation.
Ph.D Students
Sung-Hwan Wie, 1984, Korea Institute of Defense Analyses.Elias Rammouz, 1986, American University, Beirout, Lebanon.Cheng-Sheng Chang, 1989, National Tsing-Hua University, Taiwan.Xiuli Chao, 1989, University of Michigan, Ann Arbor.Brian Eck, 1990, Google.Young-Hoon Lee, 1992, Yonsei University, Korea.Dequan Shaw, 1993, GTE Laboratories, Waltham, MA.Ping-Chang (Benjamin) Yen, 1995, Hong-Kong University.Marcos Singer, 1996, Pontificia Universidad Catolica, Chile.Qing Du, 1997, Financial software development firm.Ya Yang, 1998, Duke University.
6
Andrew Feldman, 1999, Bloomberg.Haibing Li, 2005, (PhD. at NJIT) Barclays.Vladimir Krasik, 2007, Barclays.Christos Zacharias, 2014, University of Miami.Yuqian Xu, 2017, University of Illinois-Urbana-Champaign.
Columbia University Industrial Engineering and Operations Re-
search Symposia
Organizer or of 1st IEOR Symposium, 1983, “Routing and Scheduling”
Organizer of 2nd IEOR Symposium, 1984, “Reliability and Quality control”
Organizer of 4th IEOR Symposium, 1986, “Operations Research in Manu-facturing”
Organizer of 5th IEOR Symposium, 1987, “Production Planning and Schedul-ing”
Organizer of 6th IEOR Symposium, 1988, “Operations Research in Telecom-munications”
Organizer of 7th IEOR Symposium, 1989, “Operations Research and Pro-ductivity in Manufacturing”
Organizer of 8th IEOR Symposium, 1990, “Operations Research in Telecom-munications”
Organizer of 9th IEOR Symposium, 1991, “Applied Scheduling: Integrationof Disciplines”.
Coorganizer of ”Global Best Practices in Supply Chain Management: TheCase for the Retail Industries”, 1996.
7
Stern School of Business O.M. Symposia
Coorganizer of 2nd Stern O.M. Symposium, 1998, “Operations and Produc-tivity in Financial Services”
Coorganizer of 3rd Stern O.M. Symposium, 1999, “Distribution Channelsin Insurance and Financial Services”
Organizer of Stern CIIO-OM Symposium, 2000, ”Direct to Customer: NewDistribution Models”
Software Development
“Liquid Packaging Scheduling System (LPSS)”, (with L. Adler, N. Fraimanand T-P. Wu). Development Period: 1985-1987. Approximately 25,000lines Turbo-Pascal. Platform: IBM-compatible PC. User’s Manual 60 pages.Currently in Operation in Three Factories.
“Bagpak Production Scheduling System (BPSS)”, (with L. Adler, N.Fraiman, R. Kern, T-P. Wu). Development Period 1986-1989. Approxi-mately 30,000 Lines Turbo-Pascal. Platform: IBM-compatible PC. User’sManual 55 pages. Currently in Operation in Two Factories.
“PREP: A Scheduling Preprocessor”, (with K. Bhaskaran and P. Ca-iazzi), Development Period:1989 - 1990. Approximately 5000 Lines C. Plat-form: SUN workstation, UNIX, Sunview.
“Columbia University Production and Inventory Decision-making (CU-PID)”, (with R. Samroengraja). Development Period: 1988-present. Cur-rently 12,000 Lines Turbo-Pascal. Platform: IBM-compatible PC.
“Columbia University Interactive Scheduling Editor (CUISE 2.0)” (withR. Samroengraja and P.C. Yen). Development Period: 1989-present. Cur-rently 40,000 lines C and C++. Platform: SUN Sparcstation, Unix, Motif.
”LEKIN” (with X. Chao and A. Feldman). Development Period: 1997-2000. Educational software system for use in senior level and graduatecourses in production planning and scheduling. The system is currently be-ing used at approximately 60 universities worldwide.
8
Software Licensing Agreement
Columbia University has granted Paragon Management Systems in 1995a nonexclusive software license agreement for the CUISE 2.0 software pack-age. License fee is $ 20,000 up front and between $ 4,000 and $ 7,000 foreach copy installed.
Paragon Management Systems has made CUISE 2.0 operational in fa-cilities of Guilford Fabrics (North Carolina) in 1995.
Books
“Scheduling: Theory, Algorithms and Systems”, 1995, 378 pages, Prentice-Hall, NJ.
”Scheduling: Theory, Algorithms and Systems (2nd Edition, Extendedand Revised)”, 2002, 586 pages, Prentice-Hall, NJ.
”Scheduling: Theory, Algorithms and Systems (3rd Edition, Extendedand Revised)”, 2008, 671 pages, Springer.
”Scheduling: Theory, Algorithms and Systems (4th Edition, Extendedand Revised)”, 2012, 686 pages, Springer.
”Scheduling: Theory, Algorithms and Systems (5th Edition, Revised)”,2016, 670 pages, Springer.
“Operations Scheduling with Applications in Manufacturing and ser-vices” (with X. Chao), 1998, 312 pages, Mcgraw-Hill/Irwin.
”Planning and Scheduling in Manufacturing and Services”, 2005, 504pages, Springer.
”Planning and Scheduling in Manufacturing and Services (2nd Edition,Extended and Revised)”, 2009, 536 pages, Springer.
“Queueing Networks: Customers, Signals and Product Form Solutions”(with X. Chao and M. Miyazawa), 1999, 443 pages, J. Wiley, UK.
9
”Creating Value in Financial Services: Strategies, Operations and Tech-nologies” (Co-editor with E. Melnick, P. Nayyar, and S. Seshadri), January2000, Kluwer Academic Press.
”Operational Control in Asset Management: Processes and Costs”, (Ed-itor), January 2010, 219 pages, Palgrave McMillan.
”Global Asset Management - Strategies, Risks, Processes, and Technolo-gies”, (Co-editor with I. Walter), September 2013, Palgrave McMillan.
”Operations in Financial Services - Processes, Technologies, and Risks”,(with Y. Xu), 2017 (forthcoming), NOW Publishers, Inc., Boston.
Chapters in Handbooks and Reference Books
“Scheduling”, Chapter 80 in Handbook in Industrial Engineering, G.Salvendy, editor, 1992, John Wiley, NY.
“Dispatching” (with K. Bhaskaran), Chapter 83 in Handbook in Indus-trial Engineering, G. Salvendy, editor, 1992, John Wiley, NY.
“Scheduling in Flexible Assembly Systems”, Chapter 18 in ReferenceBook on Intelligent Design and Manufacturing, A. Kusiak editor, 1992, JohnWiley, NY.
“Design Issues with regard to Scheduling Systems in Manufacturing”(with R. Samroengraja and B. Yen), Chapter 6 in Computer-Aided Manu-facturing / Computer-Integrated Manufacturing, Vol. 60 in Control and Dy-namic Systems series, C. Leondes editor, 1994, Academic Press, San Diego.
”The Chao/Pinedo Model”, (with Xiuli Chao), Section 3.3 in ComputerNetworks and Systems: Queueing Theory and Performance Evaluation (2ndedition), T. Robertazzi author, 1994, Springer Verlag, NY.
”Heuristic Methods: Applications to Facility Layout, Routing and Schedul-ing”, (with D. Simchi-Levi), Chapter 9 in Mathematical Programming forIndustrial Engineers, M. Avriel and B. Golany (Eds.), 1996, Marcel DekkerInc., New York, NY.
10
“Current Trends in Deterministic Scheduling”, (with C.-Y. Lee and L.Lei), Chapter 1 in volume of Annals of Operations Research on Determin-istic Scheduling, C.Y. Lee and L. Lei (Eds.), 1997, Baltzer, Basel.
”Capacity”, (with S. Seshadri), in The Technology Management Hand-book, R.C. Dorf (Ed.), (1998) , CRC Press LLC, Boca Raton.
”Creating Value in Financial Services” (with E. Melnick, P. Nayyar, andS. Seshadri), Chapter 1 in Creating Value in Financial Services: Strategies,Operations and Technologies, E. Melnick, P. Nayyar, M. Pinedo and S. Se-shadri (Eds.), 2000, Kluwer Academic Press.
”Design and Analysis of Call Centers in Financial Services” (with S. Se-shadri and G. Shanthikumar), Chapter 18 in Creating Value in FinancialServices: Strategies, Operations and Technologies, E. Melnick, P. Nayyar,M. Pinedo and S. Seshadri (Eds.), 2000, Kluwer Academic Press.
”Dispatching and Scheduling”, (with S. Seshadri), in Handbook of In-dustrial Engineering, 3rd Edition, G. Salvendy, editor, 2002, John Wiley,NY.
”Operational Due Diligence in Cross-Border Mergers and Acquisitions”,(with L. Arrington, N. Fraiman, and C. Paris), Chapter in Due Diligence inCross-Border Mergers and Acquisitions, A. Rosenbloom (Ed.), 2002, BloombergPress.
”Scheduling”, (with S. Seshadri), Entry in the McGraw-Hill Encyclopae-dia of Science and Technology, 2002, McGraw-Hill.
”Scheduling: Optimization and Heuristics” (with C.Y. Lee), in Handbookof Applied Optimization, P. Pardalos and M. Resende (Eds.), 2002, OxfordUniversity Press, New York.
”On-Line Deterministic Scheduling, Stochastic Scheduling, Off-Line De-terministic Scheduling: A Comparative Overview” Chapter 38 in Handbookof Scheduling, J. Leung (Ed.), 2004.
”Order Scheduling Models: An Overview” (with J. Leung and H. Li),in Multidisciplinary Scheduling: Theory and Applications, Kendall, Burke,
11
Petrovic and Gendreau (Eds.), pp. 37-53, Springer, 2005.
”Coordination Issues in Supply Chain Planning and Scheduling” (withS. Kreipl and J. Dickersbach), Chapter 8 in Handbook of Production Schedul-ing, J. Herrmann (Ed.), Springer, 2006.
”Total Quality Management and Operational Risk in the Service Indus-tries” (with M. Cruz), Chapter 7 in TutORials in Operations Research, Z.-L.Chen and S. Raghavan (Eds.), INFORMS publication, 2008.
”The Interrelationships between Processes, Costs, and Risks in AssetManagement”, Chapter 18 in Global Asset Management, M.L. Pinedo andI. Walter (Eds.), Palgrave McMillan, 2013.
Chapters in Refereed Conference Proceedings
“Stochastic Shop Scheduling: A Survey” (with L. Schrage), in Determin-istic and Stochastic Scheduling, M.A.H. Dempster et al. (eds.), D. ReidelPublishing Co., Dordrecht, (1982), pp. 181-196.
“On the Computational Complexity of Stochastic Scheduling Problems”,in Deterministic and Stochastic Scheduling, M.A.H. Dempster et al. (eds.)D. Reidel Publishing Co., Dordrecht, (1982), pp. 355-365.
“On the Optimal Order of Stations in Tandem Queues”, in AppliedProbability Computer Science: the Interface, R. Disney and T. Ott (eds.),Birkhauser, Boston, (1982), pp. 307-325.
“On Optimal Policies in Stochastic Shop Scheduling”, in Annals of Op-erations Research, Volume 1, P. Hammer (ed), (1984), pp. 305-329.
“Analysis of an Assembly Line with Limited Buffers”, (with S.T. Mc-Cormick and B. Wolf), in Proceedings of the Second Conference on FlexibleManufacturing Systems: Operations Research Models and Applications, K.Stecke and R. Suri (eds.), Elsevier Science Publishers, Amsterdam, (1986),pp. 499-509.
“An Expert System for Scheduling in a Liquid Packaging Plant”, (withL. Adler and N. Fraiman), in Proceedings of the Third International Confer-
12
ence on Expert Systems and the Leading Edge in Production and OperationsManagement , Karwan, K.R. and Sweigert, J.R. (eds.), (1989), pp. 505-519.
“A Note on Queues with Bernoulli Routing”, (with C-S. Chang and X.Chao), in Proceedings of the 29-th IEEE Conference on Decision and Con-trol, (1990).
“Stochastic Convexity for Multi-Dimensional Processes”, (with C-S. Changand X. Chao), in Proceedings of the 29-th IEEE Conference on Decision andControl, (1990).
“Dispatching Issues in Job Shop Scheduling” (with K. Hadavi, W-L. Hsu,D. Levy) in Proceedings of the Joint US/German Conference on New Direc-tions for Operations Research in Manufacturing, Springer Verlag, (1992).
“Scheduling: Theory, Algorithms and Systems Development” (with K.Hadavi) in Proceedings of the 20th Annual Meeting of the Deutsche Gesellschaftfur Operations Research, Springer Verlag, (1992), pp. 35-43.
“On the Design and Development of Scheduling Systems” (with B. P.-C.Yen) in Proceedings of the Fourth International Conference on ComputerIntegrated Manufacturing and Automation Technology , IEEE Computer So-ciety Press, (1995), pp. 197-205.
”Monotonicity of Loss Probabilities in Acyclic Queueing Networks” (withS. Seshadri) in Proceedings of the 6th International Conference on Telecom-munication Systems, (1998), pp. 208-215.
”Heuristics for Planning and Scheduling in Practice”, Proceedings of the2002 GECCO Conference, New York, (2002).
”Ordering Scheduling Models with Applications in Practice”, in Proceed-ings of the First MultiDisciplinary International Conference on Scheduling:Theory and Applications (MISTA I), Nottingham, (2003), pp. 2-10.
”Inventory Control and Scheduling with Facilities in Parallel” (with V.Krasik, J. Leung and J. Zhang), in Proceedings of the Second Multidisci-plinary Conference on Scheduling: Theory and Applications (MISTA II),pp. 740-743, New York, July 2005.
13
”Scheduling Orders in Dedicated and Flexible Machine Environments”(with J. Leung and H. Li), in Proceedings of the Second MultidisciplinaryConference on Scheduling: Theory and Applications (MISTA II), pp. 471-484, New York, July 2005.
”Competitive Agent Scheduling with Controllable Processing Times”,(with J. Leung and G. Wan), in Proceedings of the Third MultidisciplinaryConference on Scheduling: Theory and Applications (MISTA III), pp. 514-522, Paris, August 2007.
Publications in Refereed Journals
“Scheduling Stochastic Tasks on Two Parallel Processors” (with G. Weiss),Naval Research Logistics Quarterly, (1979), Vol. 26, No. 3, pp. 527-536.
“Scheduling Tasks with Exponential Service Times on Parallel Proces-sors” (with G. Weiss), Journal of Applied Probability 1980, Vol. 17, No. 1,pp. 187-202.
“Scheduling Spares in a Two Component Parallel System”, Journal ofApplied Probability (1980), Vol 17, No. 3, pp. 1052-1032.
“Scheduling Jobs under Nonhomogeneous Poisson Shocks” (with S. Ross),Management Science (1980), Vol. 26, No. 12, pp. 1250-1258.
“Stochastic Models for Seismic Risk Evaluation” (with D. Shpilberg),Journal of Risk and Insurance, Vol. 48, No. 1, pp. 46 - 58.
“Minimizing Makespan with Bi-modal Processing Time Distributions”,Management Science, (1981), Vol. 27, No. 5, pp. 582 -587.
“A Note on the Two Machine Job Shop with Exponential ProcessingTimes”, Naval Research Logistics Quarterly (1981), Vol. 28, No. 4, pp.693-696.
“A Comparison between Independent and Dependent Service Times inTandem Queues” (with R. Wolff), Operations Research, (1982), Vol. 30,No. 2, pp. 464-479.
14
“Minimizing the Makespan in a Stochastic Flow Shops”, OperationsResearch, (1982), Vol. 30, No. 1, pp. 148-162.
“Minimizing the makespan in Stochastic Open Shops” (with S. Ross),Advances in Applied Probability, (1982), Vol. 14, No. 4, pp. 898-911.
“Stochastic Scheduling with Release dates and Due Dates” OperationsResearch, (1983), Vol. 31, No. 3, pp. 559-572.
“Scheduling Jobs with Exponentially Distributed processing Times onTwo Machines with resource Constraints”, (with G. Weiss), ManagementScience, (1984), pp. 883-889.
“On Flow Time and Due Dates in Stochastic Scheduling”, EuropeanJournal of Operational Research, (1984), pp. 81-85.
“Inequalities and Bounds for Stochastic Shops”, (with R. Weber), SIAMJournal of Applied Mathematics, (1984), Vol. 44, No. 4, pp. 869-879.
“ Scheduling Jobs with Exponentially distributed Processing Times sub-ject to Precedence Constraints on Two Parallel machines “, (with G. Weiss),Operations research, (1985), pp. 1381-1389.
“A Note on Stochastic Shop Models in which Jobs have the same Pro-cessing Requirements on each Machine”, Management Science, (1985), pp.840-847.
“Inequalities and Bounds for the Scheduling of Stochastic Jobs on Paral-lel Machines”, (with Z. Schechner), Journal of Applied Probability, (1985),pp. 739-744.
“On Minimizing the Expected Makespan and Flow Time in m MachineFlow Shops with Blocking”, (with S.H. Wie), Mathematics of OperationsResearch, (1986), pp. 336-343.
“Inequalities for Stochastic Flow Shops and Job Shops”, (with S.H. Wie),Stochastic Processes and Data Analysis, (1986), pp. 61-71.
15
“The Effects of the Variance on Nonpreemptive Scheduling on ParallelMachines”, (with G. Weiss), Operations Research, (1987), pp. 884-891.
“Single Machine Scheduling with Breakdown and Repair”, (with E. Ram-mouz), Probability in the Engineering and Informational Sciences, (1988),pp. 41-49.
“On the Interchangeability of Tandem Queues with Blocking”, (withX. Chao and K. Sigman), Probability in the Engineering and InformationalSciences, (1989), Vol. 3, pp. 223-236.
“Sequencing in an Assembly Line with Blocking to Minimize Cycle Time”,(with S.T. McCormick, B. Wolf and S. Shenker), Operations Research, (1989),Vol. 37, No. 6, pp. 425 - 436.
“Bounds and Inequalities for Single Server Loss Systems”, (with C-S.Chang), Queueing Systems: Theory and Applications, (1990), pp.
“Integration of Discrete Time Correlated Markov Processes in a TDMSystem: Structural Results”, (with C-S. Chang and X. Chao), Probabilityin the Engineering and Informational Sciences, (1990), Vol. 4, pp. 29 - 56.
“On Two Servers in Tandem with no Intermediate Buffer and PoissonBatch Arrivals”, (with X. Chao), Stochastic Models, (1990), Vol. 6, pp.735-749.
“Scheduling Stochastic Jobs with Due Dates on Parallel Machines”,(with H. Emmons), European Journal of Operational Research, (1990), pp.49-55.
“On the Transient Behaviour of an Assembly Line with Blocking”, (withS.T. McCormick, B. Wolf and S. Shenker), International Journal of FlexibleManufacturing Systems, (1990), Vol. 3, pp. 27-44.
“Monotonicity Results for Queues with Doubly Stochastic Poisson Ar-rivals: Ross’s Conjecture”, (with C-S. Chang and X. Chao), Advances inApplied Probability, (1991). pp. 210-228.
“Stochastic Convexity for Multi-Dimensional Processes and its Applica-
16
tions” (with C-S. Chang and X. Chao), IEEE Transactions on AutomaticControl, Special Issue on Multi-Dimensional Queueing Systems, (1991), pp.1347-1356.
“Scheduling Two Classes of Exponential Jobs on Parallel Processors:Structural Results and Worst Case Analysis”, (with C-S. Chang and R.Nelson), Advances in Applied Probability, (1992) pp. 925-944.
“On the Optimality of the LEPT rule and the cµ Rule for Machinesin Parallel” (with C-S. Chang, X. Chao and R. Weber), Journal of AppliedProbability, (1992), pp. 667-681.
“On Optimal Permutation Scheduling in Stochastic Proportionate FlowShops” (with D. Shaw and X. Chao), Probability in the Engineering andInformational Sciences, (1992), pp. 513-523.
“On Reversibility of Tandem Queues with Blocking” (with X. Chao),Naval Research Logistics, (1992), pp. pp. 957-974.
“BPSS: A Scheduling System for the Packaging Industry” (with L. Adler,N. Fraiman, R. Kern, E. Kobacker, J.C. Plotnicoff, T-P. Wu), OperationsResearch, (1993), pp. 641-648.
“On Generalized Queueing Networks with Positive and Negative Ar-rivals” (with X. Chao), Probability in the Engineering and InformationalSciences, (1993), pp. 301-334.
”Integration of Disciplines for Applied Scheduling” (with W-L. Hsu, K.McKay and P.-S. Ow), Production Planning and Control, (1993), pp. 416-421.
“Minimizing the Makespan subject to Flow Time Optimality on ParallelMachines” (with B. Eck), Operations Research, (1993), pp. 797-800.
“Guidelines for Reporting Computational Results in IIE Transactions”,(with C.-Y. Lee, J. Bard, W. Wilhelm), IIE Transactions: IIE Research,1993, pp. 121-123.
“Scheduling n Independent Jobs on m Uniform Machines with both Flow
17
Time and Makespan Objectives: A Parametric Analysis” (with S. T. Mc-Cormick), ORSA Journal of Computing, (1995), pp. 63-77.
”A Convexity Property of a Markov Modulated Queueing Loss System”(with C. Du), Probability in the Engineering and Informational Sciences,(1995), pp. 193-199.
”On Networks of Queues with Signals and History Dependent Routing”(with X. Chao), Probability in the Engineering and Informational Sciences,(1995), pp. 341-354.
“A Note on Minimizing the Expected Makespan in Flow Shops subjectto Breakdowns” (with C. Du), Naval Research Logistics, (1995), pp. 1251-1262.
“A Queueing Network with Batch Services and Signals” (with X. Chao).Operations Research Letters, (1995), pp. 237-242.
“A Queueing Network with Batch Services and Product Form Solution”(with X. Chao and D. Shaw). Journal of Applied Probability, (1996), 858-869.
“A Heuristic to Minimize Total Weighted Tardiness with Sequence De-pendent Setups” (with K. Bhaskaran and Y-H. Lee). IIE Scheduling andLogistics, (1997), 45-72.
“A Priority Index Rule for the Minimization of the Sum of the WeightedTardinesses on Parallel Machines” (with Y-H. Lee). European Journal ofOperational Research, (1997), Vol. 100, pp. 464-474.
”On the Design and Development of Object-Oriented Scheduling Sys-tems” (with B. P.-C. Yen), Annals of Operations Research, (1997), Vol. 70,pp. 359-378.
”Commentary on an Exposition of Multiple Constraint Scheduling as Im-plemented in the Goal System”, Production and Operations Management,(1997) Vol. 6, pp. 25-28.
“A Computational Study of Branch and Bound Techniques for Mini-
18
mizing the Total Weighted Tardiness in Job Shops” (with M. Singer) IIEScheduling and Logistics, (1998) Vol. 30, pp. 109-118.
”Bounds on the Mean Delay in Multiclass Queueing Networks underShortfall Based Priority Rules”, (with S. Seshadri) Probability in the Engi-neering and Informational Sciences, (1998), Vol. 12, pp. 329-350.
“Scheduling in a Proportionate Flow Shop” (with N. Shakhlevich andH. Hoogeveen), Journal of Scheduling (1998), Vol. 1. pp. 157-168.
”Optimal Allocation of Resources in a Job Shop Environment”, (with S.Seshadri), IIE Transactions in on Operations Engineering (1999), Vol. 31,pp. 1-12.
“A Shifting Bottleneck Heuristic for Minimizing the Total Weighted Tar-diness in Job Shops” (with M. Singer) Naval Research Logistics, (1999) Vol.46, pp. 1-18.
“Heuristics for Minimizing the Total Weighted Tardiness in Flexible FlowShops” (with S. Kreipl and Y. Yang) Journal of Scheduling, (2000) Vol. 3,pp. 89-108.
”A Practice-Focused Agenda for Production Scheduling Research”, (withK. Mckay and S. Webster) Production and Operations Management, (2002),Vol. 11, pp. 249-258.
”Minimizing Total Completion Time on Parallel Machines with Dead-line Constraints”, (with J. Leung), SIAM Journal of Computing, (2003),Vol. 32, pp. 1370-1388.
”Scheduling Jobs on Parallel Machines that are Subject to Breakdowns”,(with J. Leung), Naval Research Logistics, (2004), Vol. 51, pp. 60-71.
”An Overview of Planning and Scheduling Issues in Supply Chains”(with Stephan Kreipl), Production and Operations Management, (2004), Vol.13, pp. 77-92.
”Open Shops with Jobs Overlap - Revisited”, (with J. Leung, H. Li, and
19
C. Sriskandarajah) European Journal of Operational Research, (2005), Vol.163, pp. 569-571.
”Order Scheduling in an Environment with Dedicated Resources in Par-allel”, (with J. Leung and H. Li), Journal of Scheduling, (2005) Vol. 8, pp.355-386.
”Scheduling Orders for Multiple Product Types with Due Date RelatedObjectives” (with J. Leung and H. Li), European Journal of OperationalResearch, (2006) Vol. 168, pp. 370-389.
”Minimizing Total Completion Time on Uniform Machines with Dead-line Constraints”, (with T. Gonzalez and J. Leung), ACM Transactions onAlgorithms (2006), Vol. 2, pp. 95-115.
”Approximation Algorithms for Minimizing Total Weighted CompletionTime of Orders on Identical Machines in Parallel”, (with J. Leung and H.Li), Naval Research Logistics (2006), Vol. 53, pp. 243-260.
”Minimizing Total Weighted Completion Time when Scheduling Ordersin a Flexible Environment with Uniform Machines” (with J. Leung, H. Li,and J. Zhang), Information Processing Letters (2007), Vol. 103, pp. 119-129.
”Scheduling Orders for Multiple Product Types to Minimize Total WeightedCompletion Time”, (with J. Leung and H. Li), Discrete Applied Mathematics,(2007), Vol. 155, pp. 945-970.
”Stochastic Batch Scheduling and the Smallest Variance First Rule”.Prob. in the Engineering and Informational Sciences, (2007), Vol. 21, pp.579-595.
”Scheduling Imprecise Computation Tasks on Uniform Processors” (withJ. Leung and G. Wan), Information Processing Letters, (2007), Vol. 104, pp.45-52.
”Scheduling Orders on either Dedicated or Flexible Machines in Parallelin Order to Minimize Total Weighted Completion Time”, (with J. Leung
20
and H. Li), Annals of Operations Research, (2008), Vol. 159, pp. 107-123.
”Scheduling Multiple Products on Parallel Machines with Setup Costs”,(with V. Krasik, J. Leung, and J. Zhang), Naval Research Logistics, (2008),Vol. 55, pp. 654-669.
”Operations in the Service Industries: Introduction to the Special Issue”,(with U. Apte and C. Maglaras), Production and Operations Management,(2008), Vol. 17, pp. 235-237.
”Robotic Cells with Parallel Machines and Multiple Dual Gripper Robots:A Comparative Overview”, (with N. Geismar and C. Sriskandarajah), IIETransactions, (2008), Vol. 40, pp. 1211-1227.
”Optimal Capacity in a Coordinated Supply Chain” (with X. Chao andS. Seshadri), Naval Research Logistics, (2008), Vol. 55, pp. 130-141.
”Multiple Part-Type Production in Robotic Cells: The Equivalence ofTwo Real-World Models”, (with M. Dawande and C. Sriskandarajah), Manu-facturing and Services Operations Management, (2009), Vol. 11, pp. 210-228.
”A Note on ”An Approximation Algorithm for the Load-Balanced Semi-Matching Problem in Weighted Bipartite Graphs”,”, (with K. Lee and J.Leung), in Information Processing Letters, (2009), Vol. 109, pp. 608-610.
”Approximation Algorithms for Multi-Agent Scheduling to Minimize To-tal Weighted Completion Time,” (with K. Lee, B.-C. Choi, and J. Leung),in Information Processing Letters, (2009), Vol. 109, pp. 913-917.
”Online Scheduling on Two Uniform Machines subject to Eligibility Con-straints”, (with K. Lee and J. Leung), in Theoretical Computer Science,(2009), Vol. 410, pp. 3975-3981.
”A Note on Graph Balancing Problems with Restrictions”, (with K. Leeand J. Leung), Information Processing Letters, (2009), Vol. 110, pp. 24-29.
”Competitive Agent Scheduling and its Applications” (with J. Leung
21
and G. Wan), Operations Research, (2010), Vol. 58, pp. 458-469.
”Throughput Optimization in Dual-Gripper Interval Robotic Cells”, (withM. Dawande, N. Geismar, C. Sriskandarajah), IIE Transactions, (2010), Vol.42, pp. 1-15.
”Robotic Cells with Stochastic Processing Times”, (with N. Geismar),IIE Transactions, (2010), Vol. 42, pp. 897-914.
”Optimal Control of a Mean Reverting Inventory”, (with A. Cadenillasand P. Lakner), Operations Research, (2010), Vol. 58, pp. 1697-1710.
”A Decomposition Scheme for Single Stage Scheduling Problems”, (withS. Bock), Journal of Scheduling, (2010), Vol. 13, pp. 203-212
”Complexity of a Scheduling Problem with Controllable Processing Times”,(with B.-C. Choi and J. Leung), Operations Research Letters, (2010), Vol.38, pp. 123-126.
”Scheduling Two Agents with Controllable Processing Times”, (with G.Wan, S.R. Vakati, and J. Leung), European Journal of Operational Research,(2010), Vol. 205, pp. 528-539.
”Flow Shops with Machine Maintenance: Ordered and ProportionateCases”, (with B.-C. Choi, K. Lee and J. Leung), European Journal of Opera-tional Research, (2010), Vol. 207, pp. 97-104.
”Complexity of Single Machine Scheduling subject to Inventory Con-straints”, (with D. Briskorn, B.-C Choi, K. Lee and J. Leung), EuropeanJournal of Operational Research, (2010), Vol. 207, pp. 605-619.
”Makespan Minimization in Online Scheduling with Machine Eligiblity”,(with K. Lee and J. Leung), 4OR, (2010), Vol. 8, pp. 331-364.
”A Note on Makespan Minimization in Proportionate Flow Shops”, (withB.-C. Choi and J. Leung) Information Processing Letters, (2010), Vol. 111,pp. 77-81.
22
”Operations in Financial Services - An Overview”, Production and Opera-tions Management, (with E.D. Hatzakis and S.K. Nair), (2010), Vol. 19, pp.633-664.
”Economic Lot Scheduling with Resources in Parallel” (with C. Haksoz),International Journal of Production Research, (2011), Vol. 49, pp. 2625-2641.
”Robust Scheduling on a Single Machine using Time Buffers”, (with D.Briskorn and J. Leung), IIE Transactions, (2011), Vol. 43, pp. 383-398.
”Minimizing Makespan in an Ordered Flow Shop with Machine-DependentProcessing Times”, (with B.-C. Choi and J. Leung), Journal of CombinatorialOptimization, (2011), Vol. 22, pp. 797-818.
”Scheduling Jobs with Equal Processing Times subject to Machine El-igibility Constraints”, (with K. Lee and J. Leung), Journal of Scheduling,(2011), Vol. 14, pp. 27-38.
”Coordination Mechanisms with Hybrid Local Policy”, (with K. Lee andJ. Leung). Discrete Optimization, (2011), Vol. 8, pp. 513-524.
”Container Scheduling: Complexity and Algorithms”, (with B.-C. Choi,K. Lee, J. Leung, and D. Briskorn), Production and Operations Management,(2012), Vol. 21, pp. 115-129.
”Coordination Mechanisms for Parallel Machine Scheduling Problems”,(with K. Lee and J. Leung), European Journal of Operational Research,(2012), Vol. 220, pp. 305-313.
”Minimizing Total Weighted Delivery Time in Container Transporta-tion Scheduling”, (with B.-C. Choi, K. Lee, J. Leung, and D. Briskorn),Naval Research Logistics, (2012), Vol. 59, pp. 266-277.
”Production Scheduling with History-Dependent Setup Times”, (withK. Lee and L. Lei), Naval Research Logistics, (2012), Vol. 59, pp. 58-68.
”Bi-Criteria Scheduling with Machine Assignment Costs”, (with J. Le-ung, and K. Lee), International Journal of Production Economics, (2012),
23
Vol. 139, pp. 321-329.
”Optimal Production Scheduling when Demand Depends on BusinessCycle”, (with A. Cadenillas and P. Lakner), Operations Research, (2013),Vol. 61, pp. 1046-1062.
”Makespan Minimization in Online Scheduling with Machine Eligibil-ity,” (with K. Lee, and J. Leung), Annals of Operations Research, (2013),Vol. 204, pp. 189-222.
”Operations Scheduling with Multiple Resources and TransportationConsiderations”, (with K. Lee, L. Lei, and S. Wang), International Journal ofProduction Research, (2013), Vol. 51, pp. 7071-7090.
”An Application of the ”Least Flexible Job First” Rule in Schedulingand Queueing” (with J. Reed), Operations Research Letters, (2013), Vol.41, pp. 618-621.
”Appointment Scheduling with No-Shows and Overbooking” (with C.Zacharias), Production and Operations Management, (2014), Vol. 23, pp.788-901.
”Fast Approximation Algorithms for Bi-Criteria Scheduling with Ma-chine Assignment Costs” (with K. Lee, J. Y.-T. Leung, Z.H. Jia, W. Li, andB.M.T. Lin), European Journal of Operational Research, (2014), Vol. 238,pp. 54-64.
”Two Dimensional Load Balancing”, (with K. Lee and J. Y.-T. Leung),Operations Research Letters, (2014), Vol. 42, pp. 539-544.
”Approximations to Optimal Sequences in Single-Gripper and Dual-Gripper Robotic Cells in a Circular Layouts”, (with K. S. Jung, N. Geismar,and C. Sriskandarajah), IIE Transactions, (2015), Vol. 47, pp. 1-19.
”Scheduling in the Service Industries - An Overview”, (with C. Zachariasand N. Zhu), Journal of Systems Science and Systems Engineering, (2015),Vol. 24, pp. 1-48.
”An Improved Binary Search Algorithm for the Multiple-Choice Knap-
24
sack Problem” (with C. He, J. Y.-T. Leung and K. Lee), RAIRO-OperationsResearch, (2016), Vol. 50, pp. 995-1001.
”Improved Algorithms for Single Machine Scheduling with Release Datesand Rejection” (with C. He, J. Y.-T. Leung and K. Lee), 4OR, (2016), Vol.14, pp. 41-55.
”Scheduling a Single Machine with Parallel Batching to Minimize Makespanand Total Rejection Cost” (with C. He, J. Y.-T. Leung and K. Lee), DiscreteApplied Mathematics, (2016), Vol. 204, pp. 150-163.
”Personnel Scheduling and Supplies Provisioning in Emergency ReliefOperations” (with L. Lei, L. Qi, S. Wang, and J. Yang), Annals of OperationsResearch, (2015), Vol. 235, pp. 487-515.
”Operational Risk in Financial Services: A Review and New ResearchOpportunities” (with Y. Xu and M. Xue), Production and Operations Management,(2017), Vol. 26, pp. 426-445.
”Managing Customer Arrivals in Service Systems with Multiple Servers”,(with C. Zacharias), Manufacturing and Services Operations Management,(2017), forthcoming.
”Budget Allocations in Operational Risk Management”, (with Y. Xu andJ. Zhang), Probability in the Engineering and Informational Science, (2017),fortcoming.
Submitted
”Scheduling Robotic Cells: An Extension to Dual Gripper Cells” (withK.-S. Jung, N. Geismar, C. Sriskandarajah).
”A Composite Dispatching Rule for Parallel Machine Scheduling withMachine Eligibility Constraints”, (with H. Su and G. Wan).
”Scheduling Operating Rooms with Elective and Emergency Surgeries”,(with K.-S. Sung, C. Sriskandarajah, and V. Tiwari).
25
”Operational Risk Management: Coordinating Capital Investment andFirm Value”, (with Y. Xu and L. Zhu).
”Performance Analysis of Overtaking Maneuvers at Bus Stops with Tan-dem Berths”, (with B. Bian, N. Zhu, and S. Ma).
”Online Scheduling of Ordered Flow Shops”, (with K. Lee and F. Zheng).
