Curriculum Vitae Prof.Mamdouh Mahmoud Ahmed Eissa Eissa.pdf · Production of silicomanganese alloy...

1 | P a g e

Curriculum VitaePPrrooff..MMaammddoouuhh MMaahhmmoouudd AAhhmmeedd EEiissssaa

Central Metallurgical Research and Development institute, P.O. Box: 87, Helwan, Cairo, Egypt

Phone: 01221227843 E-mail: [email protected]

A. Personal Data:

Nationality: Egyptian Date of Birth: 7th June, 1953 Languages: Arabic, English and French

B. Address:

Institute: Central MetallurgicalResearch and DevelopmentInstitute (CMRDI), P.O. Box: 87,Helwan, Cairo, Egypt. Department: Steel and Ferroalloys Division: Metal Technology

Tel: (202) 27142452 - 27142454 Fax: (202) 27142451 E-mail: [email protected] E-mail: [email protected]

C. Education:

Degree Field University and Faculty DateB.Sc. MetallurgicalEngineering Faculty of Petroleum and MiningEngineering, Suez-Canal University. May 1976M.Sc. Metallurgy Faculty of Engineering, Cairo University. November 1983Ph.D. SteelMetallurgy Faculty of Engineering, Cairo University. January 1989

2 | P a g e

D. Employment History:

Date Organization PositionJune 2013-Until Now CMRDI, Cairo, Egypt Emeritus Professor, Steel TechnologyDepartmentMarch 2012-June 2013 CMRDI, Cairo, Egypt Professor, Head of Metal TechnologyDivisionMarch 2004-March 2012 CMRDI, Cairo, Egypt Professor, Head of Steel TechnologyDepartment, Metal TechnologyDivisionJuly 2003-Feb. 2004 CMRDI, Cairo, Egypt Professor, Head of Steel andFerroalloys Department, ExtractiveMetallurgy DivisionSep. 2001- Feb. 2004 CMRDI, Cairo, Egypt Professor, Deputy Head of ExtractiveMetallurgy DivisionDec. 1999- Aug. 2001 CMRDI, Cairo, Egypt Professor, Steel and Ferroalloys Dept.,Extractive Metallurgy DivisionJune 1994- Nov. 1999 CMRDI, Cairo, Egypt Assistant Professor, Steel andFerroalloys Dept., ExtractiveMetallurgy DivisionJan. 1989- May 1994 CMRDI, Cairo, Egypt Researcher, Steelmaking andFerroalloys Dept.Jan. 1988- Dec. 1988 CMRDI, Cairo, Egypt Preparing Ph.D.April 1986- June 1988 French ResearchInstitute for Iron andSteel (IRSID), Paris,FranceFrench scholarship, carry outresearch work for Ph.D. degree

Nov. 1983- March 1986 CMRDI, Cairo, Egypt Senior Research Assistant,Steelmaking and Ferroalloys Dept.March 1980- Nov. 1983 National ResearchCentre, Cairo, Egypt Metallurgical Engineer, Steelmakingand Ferroalloys Lab., FerrousMetallurgy Unit.Oct. 1976- Feb. 1980 Army Service

3 | P a g e

E. Personal experience

I- General Field of Specialization: MetallurgyII- Fine Specialization: Metallurgy of Steel and Ferroalloys

III- Current research Interest High- strength high-performance steels Ultra-fine grained, high toughness-high strength steel Developed new steel alloys using nanotechnology technique Developed steel alloys for nuclear reactor applications New grade of steel shots and steel grits Modified tool steels Recycling of mill scale waste into valuable materials Low and high carbon microallyed steels Nitrogen containing microalloyed steels High nitrogen steels Modified stainless steels Modified free cutting steels Ultra light weight steel foam New grades of steel shots and steel grits Ultra high strength steels Superior high strength low impact transition temperature steels Quasi crystalline materials Electroslag refining of steels Non metallic inclusions in steels Recycling of iron and steel slags Treatment of low grade Mn-ores Production of silicomanganese alloy from high Mn-slag High carbon and extra low carbon ferroalloys: FeMn, FeSi, FeCr, FeTi, FeSiMg,FeSiMn, FeV, FeNi, FeNiV. Nitriding of ferroalloys in solid state

4 | P a g e

F. Supervision of Scientific ThesisSupervising 18 M.Sc. theses and 17 Ph.D. theses submitted to different faculties at differentuniversities.

1- Ph.D. Thesis

StudentName

Thesis title University Time Status

MohamedYoussefAshour

Effect of steelmaking parameters on thequality of steel produced by LDconverters at the Egyptian Iron and SteelWorks

Faculty of Science,Cairo University

1992 Awarded

Hoda El-Faramawy

Study of the production offerrochromium from Egyptianchromite ores on pilot plant scale


1992 Awarded

MohssenMouriceLamei

The effect of microalloying elements onthe mechanical properties of low carbon-manganese steel


1993 Awarded

TahaMattar

Study the effect of productiontechnology on cleanliness andproperties of tool steel

Faculty of Science,Helwan University

1996 Awarded

AymanFathi

Development of low nickel, cobalt freesteel instead of the costlyconventional high-cobaltmaraging steel


2000 Awarded

AzzaMohamedAhmed

Demanganization and desiliconization ofhigh manganese pig iron to produce slagfor the production of silicon-manganese


2001 Awarded

SaeedNabil Ghali

Effect of nitrogen as alloying element onthe behavior of stainless steel


2006 Awarded

HossamHalfa

Improvement of maraging steels byusing ESR technology

Faculty ofEngineering, CairoUniversity

2007 Awarded

MohamedKamal AbdRabou

Effect of steelmaking deoxidationprocess on the properties ofsulphur containing free cuttingsteel

Faculty of Science,Al - AzharUniversity

2010 Awarded

5 | P a g e

FouadMohamedSayedAhmed

Effect of vanadium and titaniummicroadditions on themechanical and electrochemicalproperties of hot deformed andheat treated steels

Faculty of Science,Helwan University,

2011 Awarded

AhmedAbdel-LatifMohamed

Practical investigation of developedmaterials for nuclear applications

Faculty ofEngineering,Fayoum University

2014. Awarded

Alyabdallahsaeedabdallah

Design of steel alloys for industrial andnuclear applications

Faculty of Science,PhysicsDepartment, AinShams University

2016 Awarded

RaaftMohamedAbd El-WahabFarahat

Effect of slags physico-chemicalproperties on energy consumptionand air pollutants emission inelectric arc furnace


in progress

MohammedSalah FahimAli

Development of High Strength HighToughness Low Alloy Steel forHigh Performance EngineeringApplications

Faculty of Science,ChemistryDepartment, AinShams University

in progress

SamahAhmadMohammadAhmad Al-Shelkamy

Influence of plasma treatment onstainless steels for nuclearapplications

Faculty of Science,Assiut University

in progress

ShaimaaMohamedHafezOsman

Potential applications of locallyproduced steel alloys for nuclearreactors domain


in progress.

NohaMohamedAli Ahmed

Investigation of Ferritic and MartensiticStainless Steels for Nuclear PowerReactors


in progress

6 | P a g e

2- M.SC. Thesis

StudentName

Thesis title University Time Status

Taha Matta Study of dephosphorization anddesulphurization of steel in open-hearth furnaces


1991 Awarded

Hala AbdEl-Maksoud

Study of non-metallic inclusions inoxygen converter steel


1993 Awarded

AhmedTawfik

Effect of vanadium and nitrogen onmechanical properties of lowcarbon steels


1993 Awarded

AymanFathi

Microalloyed high carbon steel Faculty of Science,Helwan University

1994 Awarded

Alaa El-Mohamady

The effect of slags composition on thecleanliness of tool steels


1994 Awarded

AzzaMohamedAhmed

Thermodynamic reactions in multicomponent systems of imported tosteelmaking


1994 Awarded

GamalFarid Aly

Production of high carbonferromanganese using manganeserich slag in the charge

Faculty of Science,MonoufiaUniversity

1997 Awarded

SaeedNabilSaeedGhali

Study of some factors affecting theproduction of ferrosiliconmagnesium alloy


2002 Awarded

HossamAhmedMohamedHalfa

Improvement of high speed tool steel byusing electro-slag remeltingtechnology


2003 Awarded

MohamedKamal El-Fawakhry

Study the effect of physical propertiesand chemical composition ofelectroslag remelting slags on thecleanliness and properties ofmaraging steel

Faculty of Science ,Al-AzharUniversity

2005 Awarded

7 | P a g e

RaaftMohamedAbd El-WahabFarahat

Recycling of mill scale waste insteelmaking process


2010 Awarded

Hossam El-DinAbdallahMorgan

Production of ultra-light weight steelfoam

Faculty of Science,Benha University

2011 Awarded

SehamShahenSaleh Al-Wany

Recycling of mill scale waste forproducing steel alloys

Faculty of Science(Girls), Al-azharUniversity

2015 Awarded

MohamedAbdelkaderMohamed

Effect of direct reduced iron percentagein electric arc furnace charge mixon steelmaking parameters andmechanical properties of lowcarbon steel

Faculty of Science ,Banha University

2016 Awarded

AhmedSaid TagEldin

Investigation of new stainless steelsdeveloped for industrial andnuclear applications

Faculty of Science,PhysicsDepartment, AinShams University

2017 Awarded

HassanBahaa-Eldin

Production of ultrafine grained steel Faculty ofEngineering, CairoUniversity

2018 Awarded

by SayedSaid Sayed

Direct quenching of hot forged steelalloyed with Cr or Cr and Mo,.


in progress

AhmedHamedMahmoudEid

Advanced fine - grained and nano-precipitates steel alloys


in progress.

8 | P a g e

G. Awards and Honors1- Local

Development of Metallurgical Industries Prize, Development Research and TechnologicalPlanning Center, Cairo University, 1996

2- International

1. Carry out research work for Ph.D. degree at French Research Institute for Iron and Steel“IRSID”, Paris, France, April 1986 to June 1988.

2. Short course in ladle metallurgy, and training on the applied research of the use of hot iron,ladle metallurgy of steel, electric arc furnace technology and converter technologyat MEFOS, Lulea, Sweden, Sept. - Nov., 1984.

3. Scientific visit to MEFOS, Lulea, Sweden, Dec. 1991.4. Scientific visit to BAIKOV, Inst. of Metallurgy, Moscow, Russia, Dec. 1991.5. Training course in steelmaking, Japan, Nov. 1996 - Feb. 1997.6. Scientific visit to Miskolc University, Hungary. Oct. 2001 to April 2002.7. Scientific visit to Aachen University and Paderborn University , Germany , June 2003

H. Contribution in Industrial Projects62 final reports for industrial and national projects financed by different sponsors

concerning the field of production of steel and ferroalloys, quality control,improvement of final product, transfer of new technologies, utilization of Egyptianores and local possibilities, development of production aggregates.

1. Evaluation of heat treatment processes of spring steels, August 1981.Sponsor: Spring and Transport Needs Manufacturing Co., Egypt.Position: Member of Research Team.

2. Introduction of oxygen lancing in 5-ton electric-arc furnace, January, 1983.Sponsor: The Egyptian Iron and Steel Co., Egypt.Position: Member of Research Team.

3. Local demand and price level of electrical steel, March 1983.Sponsor: Egyptian Copper Works Co., Alexandria, Egypt.Position: Member of Research Team.

4. Production technology of free-cutting steels, Sept. 1983.Sponsor: Delta Steel Mill Co., Cairo, Egypt.Position: Member of Research Team.

5. Production technology of spring steels, Jan. 1984.Sponsor: Delta Steel Mill Co., Cairo, Egypt.Position: Member of Research Team.

9 | P a g e

6. Production technology of steel grades for bolts and nuts, March 1984.Sponsor: Delta Steel Mill Co., Cairo, Egypt.Position: Member of Research Team.

7. Evaluation of production technique of cold rolled sheet steel, March 1984.Sponsor: The Egyptian Iron and Steel Co., Egypt.Position: Member of Research Team.

8. Application of oxygen lancing technology in 25-tonne electric-arc furnace, April 1984.Sponsor: Egyptian Copper Works Co., Alexandria, Egypt.Position: Member of Research Team.

9. Optimization of oxygen lancing technology in 12-tonne electric arc furnace, April 1985.Sponsor: The Egyptian Iron and Steel Co., Egypt.Position: Member of Research Team.

10. Production of high strength reinforcing bars, July 1988.Sponsor: The Academy of Science and Technology, Egypt.Position: Member of Research Team.

11. Production of corrosion and heat resisting steels, 1989.Sponsor: Abu Zaabal for Chemical and Fertilizers Co., Egypt.Position: Head of Group.

12. Follow-up of quality control at El-Nasr Steel Pipes and Fittings Co., March 1989.Sponsor: El-Nasr Steel Pipes and Fittings Co., Egypt.Position: Head of Group.

13. Production of ferrotitanium, April 1989.Sponsor: The Academy of Science and Technology, Egypt.Position: Member of Research Team.

14. Production of ferrovanadium from boiler ash, June 1989.Sponsor: The Academy of Science and Technology, Egypt.Position: Member of Research Team.

15. Production of corrosion resistance steels, 1990.Sponsor: El-Nasr Coke and Chemicals Industries Co., Egypt.Position: Head of Group.

16. Implementation of water cooled panels in electric-arc furnaces, 1990.Sponsor: The Egyptian Iron and Steel Co., Egypt.Position: Head of Group.

17. Follow-up of quality control at El-Nasr Steel Pipes and Fittings Co., March 1990.Sponsor: El-Nasr Steel Pipes and Fittings Co., Egypt.Position: Head of Group.

18. Introduction of oxygen blowing technology in 25-tonne EAF of Delta Steel Mill Co., 1990.Sponsor: Delta Steel Mill Co., Egypt.Position: Head of Group.

19. Production of high strength low alloy steels in open-hearth furnaces, 1991.Sponsor: The National Metal Industries Co., Egypt.Position: Head of Group.

20. Study of some technical defects of steel pipes, 1991.Sponsor: El-Nasr Steel Pipes and Fittings Co., Egypt.Position: Head of Group.

21. Production of Ferrochrome, 1992.

10 | P a g e

Sponsor: The Academy of Science and Technology, Egypt.Position: Head of Group.

22. Application of oxygen lancing technology in 35-tonne electric arc-furnaces, July 1992.Sponsor: The National Metal Industries Co., Egypt.Position: Head of Group.

23. Production of high strength steel for prestressed concrete, 1992.Sponsor: The Academy of Science and Technology, Egypt.Position: Head of Group.

24. Production of special steel grades for local needs, 1992.Sponsor: The Academy of Science and Technology, Egypt.Position: Head of Group.

25. Production of high strength reinforcing bars in 35-tonne electric arc furnaces, Dec. 1992.Sponsor: The National Metal Industries Co., Egypt.Position: Head of Group.

26. Production of ferrovanadium from boiler ash, 1992.Sponsor: The Academy of Science and Technology, Egypt.Position: Head of Group.

27. Production of tool steels, 1994.Sponsor: The Academy of Science and Technology, Egypt.Position: Head of Group.

28. Follow-up of quality control and extractive of Zn in El-Nasr Steel Pipes and Fittings Co.,1994.Sponsor: El-Nasr Steel Pipes and Fittings Co., Egypt.Position: Head of Group.

29. Production and quality improvement of 6-tonne electric arc furnace, Nov. 1994.Sponsor: The Egyptian Iron and Steel Co., EgyptPosition: Head of Group.

30. Implementation of water cooled walls in 25-tonne electric arc furnace, 1995.Sponsor: Delta Steel Mill Co., Egypt.Position: Head of Group.

31. Follow-up of quality control at El-Nasr Steel Pipes and Fittings Co., 1995.Sponsor: El-Nasr Steel pipes and Fittings Co.Position: Co-principal Investigator

32. Improvement of steel components in machinery and equipment factories, 1996.Sponsor: Machinery and Equipment Factories, Sugar and Integrated Industries Co.Position: Co-principal Investigator.

33. Evaluation of hot galvanizing process and tools workshop at El-Nasr Steel Fittings Co.,1996.Sponsor: El-Nasr Steel Pipes and Fittings Co.Position: Co-principal Investigator.

34. Improvement of mechanical properties of some structural steels manufactured inmachinery and equipment factories, 1996.Sponsor: Machinery and Equipment Factories, Sugar & Integrated Industries Co.Position: Co-principal Investigator

35. Market and feasibility study for silicon carbide plant, 1997.Sponsor: Sugar and Integrated Industries Co.

11 | P a g e

Position: Head of Group.36. Feasibility study of dedusting in Egyptian Steelmaking Companies, 1997.` Sponsor: The Holding Co. for Metallurgical Industries.

Position: Head of Group.37. Production of silicomanganese from local and imported raw materials for local needs,

1997.Sponsor: The Academy of Science and Technology.Position: Member of Research Team.

38. Improvement of production and performance enhancement in Sinai Manganese Co., 1997.Sponsor: Sinai Manganese Co.Position: Co-principal Investigator.

39. Feasibility and economic study of silicomanganese production, 1998.Sponsor: Mining and Refractories Co.Position: Head of Group.

40. Follow-up of quality control and performance enhancement in El-Nasr Steel Pipes andFittings Co., 1998.Sponsor: El-Nasr Steel Pipes and Fittings Co.Position: Co-principal Investigator.

41. Evaluation of relining and refractory materials of annealing furnace at SEMAFCo., 1999.Sponsor: SEMAF Co.Position: Co-principal Investigator.

42. Production of cored wire for Fe-Ti and Ca-Si ferroalloys, Dec. 1999.Sponsor: The Academy of Science and TechnologyPosition: Co-principal Investigator

43. Follow – up of quality control and performance enhancement in El-Nasr Steel Pipes andFittings Co., 1999.Sponsor: El-Nasr Steel Pipes and Fittings Co.Position: Co-principal Investigator

44. Production of steel shots used in casting cleaning, Feb. 2000.Sponsor: The Academy of Science and Technology, Egypt.Position: Principal Investigator

45. Production of ferrosilicon – magnesium, 2001.Sponsor: The Egyptian Company for FerroalloysPosition: Co-principal Investigator

46. Production of ferromanganese – nitrogen alloy, Oct. 2001.Sponsor: The Academy of Science and Technology, Egypt.Position: Co-principal Investigator

47- Production and performance improvement in ferromanganese Factory, Sinai ManganeseCompany, (2004)

Sponsor: Sinai Manganese CompanyPosition: Principal Investigator

48- Investigation of phase transformation and precipitation reaction at high temperature inmicroalloyed steels, Cooperation research project with the Institute of FerrousMetallurgy, Aachen, Germany

Sponsor: The German Ministry of Scientific Research and Education, (2002-2005)

12 | P a g e

49- Decarburization and nitriding of ferromanganese fine in the solid state, Research projectthrough Egyptian – Bulgarian cooperation program

Sponsor: The Academy of Science and Technology, (2004-2007)Position: Co-principal Investigator

50- Evaluation of materials input for production of high carbon ferromanganese and qualityimprovement of the produced alloy in Sinai Manganese Company, (2006).

Sponsor: Sinai Manganese CompanyPosition: Principal Investigator

51. Development of environmentally friend free lead free-cutting steel, 2010.Sponsor: Research Development and Innovation Programme (RDI), EU-Egypt

Innovation Fund – Grant Scheme2Position: Co-principal Investigator

52. Innovative Low-Nickel Cobalt Free Stainless Steel Instead of the Costl Conventional High-NickelHigh-Cobalt Maraging Steel, 2010.

Sponsor: Research Development and Innovation Programme (RDI), EU-EgyptInnovation Fund – Grant Scheme2

Position: Co-principal Investigator53. Commercialization of Ferromanganese Nitrogen Alloy, 2010.

Sponsor: Research Development and Innovation Programme (RDI), EU-EgyptInnovation Fund – Grant Scheme2

Position: Co-principal Investigator54. Energy Saving in High Carbon Ferromanganese Alloy Production, 2011.

Sponsor: Science and Technological Development Fund, EgyptPosition: Principal Investigator

55. Investigation the interaction metal- gas in the conditions of levitation melting underpressure, 2013Research project through Egyptian – Bulgarian cooperation program.Sponsor: The Academy of Science and TechnologyPosition: Principal Investigator

56. Prefeasibility Study for Selecting the Best Alternatives for Ferroalloys Production at theEgyptian Ferroalloys Company, 2014.Sponsor: Egyptian Ferroalloys CompanyPosition: Co-Principal Investigator

57. Production of Siliconmanganese Alloy at Sinai Manganese CompanySponsor: Sinai Manganese CompanyPosition: Principal Investigator

58. Production of new grade of steel shots and steel grits, 2017.Sponsor: Science and Technological Development Fund "STDF", EgyptPosition: Principal Investigator.

59. Production of Ultra-Fine Grained, High Toughness, High Strength Steel, 2017.Sponsor: Science and Technological Development Fund "STDF", EgyptPosition: Co-Principal Investigator.

60. Technology package for the production of tool steels on semi-industrial and industrialscale in Egypt, 2017.

Sponsor: Science and Technological Development Fund "STDF", EgyptPosition: Consultant

13 | P a g e

61. Production of aluminosilicon from local ores and industrial wastes, 2017.Sponsor: Science and Technological Development Fund "STDF", EgyptPosition: Consultant

62. Excluding Heat Treatment Process in the production of High Manganese Steel, 2017.Sponsor: Science and Technological Development Fund "STDF", EgyptPosition: Consultant

ON-GOING RESEARCH PROJECTS

4 on-going research projects

1. Deepening of Local Manufacturing of Mineral and Metal Products in the Egyptian IndustriesSponsor: The Academy of Science and Technology, EgyptPosition: Principal Investigator of Track

2. Technological alliance for deepening the local manufacturing of mineral resources in Sinai fordeveloping the chemical industry in EgyptSponsor: The Academy of Science and Technology, EgyptPosition: Principal Investigator

3. Metallic interconnects for solid oxide fuel cellsResearch project through Egyptian – Italian cooperation programSponsor: The Academy of Science and Technology, EgyptPosition: Co-Principal Investigator

4. Development of innovative steel and ferrous alloys by nano-modifiers addition techniqueResearch project through Egyptian – Bulgarian cooperation programSponsor: The Academy of Science and Technology, EgyptPosition: Co-Principal Investigator

I. Training Activities:

1- AttendedTraining Abroad:

1. Short course in ladle metallurgy, and training on the applied research of the use ofhot iron, ladle metallurgy of steel, electric arc furnace technology and convertertechnology at MEFOS, Lulea, Sweden, Sept. - Nov., 1984.

2. Training course in steelmaking, Japan, Nov. 1996 - Feb. 1997.

14 | P a g e

2- Design and conductedOrganizing and sharing in 34 training programmes in the field of steelmaking and

ferroalloys for the engineers, steelmakers and technicians in steelmaking, ferroalloysand related companies as well as students of engineering and science faculties

1. Training program for engineers and steelmakers in spare parts shop, Iron and Steel Co.,1983.

2. Training program for engineers and steelmakers in Thomas Shop, Iron and Steel Co., 1984.

3. Training program for engineers of ferromanganese plant, Sinai Manganese Co., Sept. 1991.

4. Training program for engineers and steelmakers in the National Metal Industries Co., July-August, 1992.

5. Training program for engineers and steelmakers in Machinery and Equipment Factories,Sugar and Integrated Industries Co., July-August 1996.

6. Training course in Steel Metallurgy and Ferroalloys for Syrian engineers at the Arab Ironand Steel Union, April 1998.

7. Training course in Steelmaking for engineers from Saudi Iron and Steel Co. "HADEED" atthe Arab Iron and Steel Union, Cairo.

8. Training course in "Ironmaking & Steelmaking and Ferroalloys" for the students ofApplied Chemistry Department, Faculty of Science, Ain Shams University, 2004.


10. Training course in "Iron making & Steelmaking and Ferroalloys" for the students ofApplied Chemistry Department, Faculty of Science, Ain Shams University, 2006.


12. Training course in "Production, Evaluation and Application of Steel Alloys ", for engineersfrom Kader Factory, Arabian Manufacturing Affairs, 13 – 24 January, 2008.


14. Training course in "Microstructure Observation, Testing and Evaluation of Steel Alloysand Special Steels", for engineers from Kader Factory, Arabian Manufacturing Affairs, 18– 22 January, 2009.


16. Training course in "Heat Treatment of ferrous Metals and Alloys", Organized by Academyof Since and Technology, 12 – 16 July, 2009.

17. Training program for engineers in Military Factory 100, in "Recent Technologies inSteelmaking Processes", Organized by Arabian Manufacturing Affairs, December 2009 -January 2010.

15 | P a g e

18. Training course in "Microstructure Observation of Steel ", for engineers from MilitaryFactories and Arabian Manufacturing Affairs, 17 – 21 January, 2010.

19. Training course in "Heat Treatment of Steel ", for engineers from Military Factories andArabian Manufacturing Affairs, 14 – 18 March, 2010.

20. Training course in "Microstructure Observation, Testing and Evaluation of Steel Alloys ",for engineers from Military Factories and Arabian Manufacturing Affairs, December,2010.

21. Training program in "Production of Ferroalloys and Silicomanganese" for engineers,Chemists and technicians of ferromanganese plant, Sinai Manganese Co., held in AboZenema, October, 2011.

22. Applied Training in "Production of Silicomanganese" for production engineers offerromanganese plant, Sinai Manganese Co., held in Pilot Plant of Steel and Ferroalloys,CMRDI, November, 2011.

23. Training program in "Analysis of Silicomanganese" for Chemists and technicians ofAnalysis Lab, Sinai Manganese Co., held in Steel and Ferroalloys Department, CMRDI,November, 2011.

24. Training course in "Microstructure Observation and NMI Detection", for engineers fromEBICO Co, December, 2012.

25. Training course in "Steelmaking Technologies and Material Balance Calculations", forengineer from Saudi Steel Co, December 2012 - January 2013.

26. Training course in "Heat Treatment Processes ", for engineers and technicians fromMilitary Factories, 8 – 19 December, 2013.

27. Training course in "EAF and ladle slag in steel making process" for Engineers andChemists, Al-Ezz Dekhela Steel Co (EZDK), Alexandria, February 2014.

28. Training course in "Applied Metallographic tests for steel products", for Engineers andChemists, Al-Ezz Dekhela Steel Co(EZDK), Alexandria,11-15 May 2014.

29. Training course in "Heat Treatment of Metals ", for engineers and technicians fromMilitary Factories, 7 – 18 December, 2014.

30. Training course in "Heat Treatment of Metals ", for technicians from Military Factories,6.9 – 1.10, 2015.

31. Training course in " In the Field of Ironmaking and Steelmaking", for engineer fromK.S.A, 23-27.4.2017.

32. Training course in "Surface Treatment of Steel", for engineers from Military Factories, 3 –14 December, 2017.

33. Training course in "Heat Treatment of Steels", for engineers from Military Factories, 14–25 January, 2018.

34. Training course for African Engineers, 18– 29 March, 2018

16 | P a g e

J. Fellowship and scholarship:1. Channel Scholarship to Carry out research work for Ph.D. degree at French Research Institute

for Iron and Steel “IRSID”, Paris, France, April 1986 to June 1988.2. MEFOS, Lulea, Sweden, Dec. 1991.3. BAIKOV, Inst. of Metallurgy, Moscow, Russia, Dec. 1991.4. Japan, Nov. 1996 - Feb. 1997.5. Miskolc University, Hungary. Oct. 2001 to April 2002.6. Aachen University and Paderborn University , Germany , June 2003

K. Professional Society Affiliations (Member)

1.Engineering syndicate2. Egyptian Association for Industrial Development3. Egyptian Foundry Society4. Egyptian Heat Treatment Society (EHTS)

L. Reviewer for Scientific Journals:

1.Abstract and Applied Analysis2. International Journal of Physical Sciences3. International Research Journal of Materials Engineering4. Ironmaking & Steelmaking5. Journal of Materials Science and Chemical Engineering (MSCE)6. Journal of Metallurgical Engineering (ME)7. Materialia8. Mineralogia9. Silicon10. World Journal of Engineering and Physical Sciences

M. International conferences:Included in NN. List of Publications

192 published work in International Conferences and Scientific Journals covering theitems of Metallurgy of Steel and Ferroalloys including production, treatment andtesting of final products

17 | P a g e

1. Mamdouh Eissa, MSc Thesis entitled: "The effect of blowing relatively cold pig iron inconverter on its technological parameters", Faculty of Engineering, Cairo University,(1983).

2. M.F.Mekkawy, K.A.R.El-Fawakhry, M.L. Mishreky and Mamdouh Eissa, "The effect ofblowing relatively cold pig iron", Bull. NRC, 9, (1984), 473-479.

3. K.A.M.El-Fawakhry, M.L. Mishreky, S.A.El-Ghazaly, T.El-Bitar and Mamdouh Eissa,"A contribution of oxygen lancing in electric-arc furnaces", Jubilwumi KohaszatiKonferencia, Miskole, Hungray, Nov. 4-6, (1985).

4. New technology for production of ferrotitanium from ilmenite ore, Patent No. 365/87,Academy of Scientific Research and Technology, (1987).

5. New grades of high strength low alloy construction steel, Patent No. 366/87, Academyof Scientific Research and Technology, (1987).

6. Mamdouh Eissa, PhD Thesis entitled: "The effect of microalloying additions and hotrolling condition on the mechanical properties of high strength low alloy steels",Faculty of Engineering, Cairo University, (1988).

7. A.Baraka, K.El-Fawakhry, M.L. Mishreky, Mamdouh Eissa and M.M.Lamei, "Effectof titanium as microalloying element on the mechanical properties of high strengthlow alloy steel", 2nd Inter. Conf. on Mining and Metallurgical Engineering, Suez CanalUniversity, March 20-22, (1989), 580-588.

8. K.A.El-Fawakhry, M.L. Mishreky, A.R.Ebaid, Mamdouh Eissa and T.M.Matter,"Behaviour of sulphur in basic open-hearth furnaces", Middle East SulphurSymposium, Cairo, Egypt, Feb. 12-16, (1990), 79-91.

9. K.El-Fawakhry, M.L. Mishreky and Mamdouh Eissa, "Secondary hardening ofvanadium and titanium microalloyed steels", Scandinavian Journal of Metallurgy, 19,(1990), 33-38. Neue Hutte, 35,9, (1990), 343-348.

http://www.scopus.com/inward/record.url?eid=2-s2.0-0025228155&partnerID=MN8TOARS

10. M.F.Mekkawy, K.El-Fawakhry, M.L. Mishreky and Mamdouh Eissa, "Effect ofrolling schedule on mechanical properties and structure of V- and Ti-microalloyedsteels", Scandinavian Journal of Metallurgy, 19, (1990), 82-84.http://www.scopus.com/inward/record.url?eid=2-s2.0-0025256722&partnerID=MN8TOARS

11. K.A.M.El-Fawakhry, M.L. Mishreky , Mamdouh Eissa, T.A.El-Bitar and H.S.El-Faramawy, "Investigation of a new technology for production of ferrotitanium",Scandinavian Journal of Metallurgy, 19, 4, (1990), 187-190.

http://www.scopus.com/inward/record.url?eid=2-s2.0-0025252752&partnerID=MN8TOARS

12. M.F.Mekkawy, K.El-Fawakhry, M.L. Mishreky and Mamdouh Eissa, "Effect ofreheating temperature on microstructure and strength of V- and Ti-microalloyedsteels", Scandinavian Journal of Metallurgy, 19, 5, (1990), 236-245.http://www.scopus.com/inward/record.url?eid=2-s2.0-0025530875&partnerID=MN8TOARS

13. M.F.Mekkawy, K.El-Fawakhry, M.L. Mishreky and Mamdouh Eissa, "Effect offinish-rolling temperature on microstructure and strength of V- and Ti-microalloyed steels", Scandinavian Journal of Metallurgy, 19, 5, (1990), 246-256.http://www.scopus.com/inward/record.url?eid=2-s2.0-

18 | P a g e

0025530874&partnerID=MN8TOARS14. M.F.Mekkawy, K.El-Fawakhry, M.L. Mishreky and Mamdouh Eissa, "Direct

quenching of low manganese steels microalloyed with vanadium or titanium",Transactions of the Iron and Steel Society (ISS), Iron and Steelmaker, 17,10, (1990), 75-83.http://www.scopus.com/inward/record.url?eid=2-s2.0-0025782168&partnerID=MN8TOARS

15. .F.Mekkawy, K.El-Fawakhry, M.L. Mishreky and Mamdouh Eissa, "Effect ofinterrupted accelerated cooling on mechanical properties and structure of V- andTi-microalloyed steel bars", Materials Science and Technology, January (1991), Vol.7, 28-36.http://www.scopus.com/inward/record.url?eid=2-s2.0-0025792289&partnerID=MN8TOARS

16. .F.Mekkawy, K.El-Fawakhry, M.L. Mishreky and Mamdouh Eissa, "Characterizationof precipitates in vanadium and titanium microalloyed steels", Iron and SteelInstitute of Japan (ISIJ) International, Vol. 31, No. 9, (1991), 1020-1025.http://www.scopus.com/inward/record.url?eid=2-s2.0-0025798392&partnerID=MN8TOARS

17. K.A.El-Fawakhry, M.L. Mishreky , Mamdouh Eissa, A.R.Ebaid and T.M.Matter,"Dephosphorization of steel in open-hearth process", The third Mining, Petroleumand Metallurgy Conference, MPM, The Faculty of Engineering, Cairo Univ., February2-4, (1992), Giza, Egypt, Vol. 3, Part 2, 152-160.

18. Mamdouh Eissa, M.Y.Ashour, M.A.Abdalla and K.El-Fawakhry, "Effect of siliconcontent of hot metal on the productivity and attack on the lining of LD converter",Neue Hutte, 36, 11/12, (1991), 407-411.

19. Mamdouh Eissa, M.Y.Ashour, H.Abd El-Maksoud, M.A.Abdalla and K.El-Fawakhry,"Dephosphorization and desulphurization of low carbon steels in LD converters",AMSE Transactions, Vol. 10, No. 2, (1992), 1-15.

20. K..El-Fawakhry, M.L. Mishreky , Mamdouh Eissa and H.El-Faramawy, "Utilization ofEgyptian chromite ore concentrate in the production of ferrochromium", TheSecond Symposium on Mineralogy of Iron and Ferroalloys, National Committee ofMineralogy, Cairo, 19 Sept. (1992).

21. K.A.El-Fawakhry, M.L. Mishreky and Mamdouh Eissa, "Contribution of oxygenlancing and water cooled panels in electric-arc furnaces", Metallurgy' 92,"Modernization of Iron and Steel Industry and New Processes of Steel Production",Cracow, 14-16 October, (1992).

22. Mamdouh Eissa, K.A.El-Fawakhry, M.L. Mishreky and O.I.H.Abd ElKarim ,"Production of titanium microalloyed reinforcing steel bars in open hearthfurnaces", AMSE Transactions, Vol. 34, No. 1, (1993), 1-15.

23. K.A.El-Fawakhry, M.L. Mishreky and Mamdouh Eissa, "Improvement of steelmakingprocess in electric arc furnaces by oxygen lancing and water cooled panels",Modeling, Measurement and Control, C. AMSE Press, Vol. 34, No. 1, (1993), 33-41.

24. Mamdouh Eissa, "Behaviour of manganese in oxygen blowing of mediummanganese pig iron", Modeling, Measurement and Control, C. AMSE Press, Vol. 39,No. 1, (1993), 37-47.http://www.scopus.com/inward/record.url?eid=2-s2.0-

19 | P a g e

0027884608&partnerID=MN8TOARS25. K.A.El-Fawakhry, M.L. Mishreky Mamdouh Eissa and O.I.H.Abd ElKarim ,

"Assessment of oxygen lancing technique in electric arc furnace", The FirstInternational Conference of Industrial Furnaces and Supplements, Arab Iron and SteelUnion, Cairo, 14-15/4/(1993), 1.5, 1-10.

26. Mamdouh Eissa, M.Y.Ashour, K.El-Fawakhry, M.A.Abdalla and H.Abd El-Maksoud,"Origin and characteristic of nonmetallic inclusions in low carbon steel producedin LD converter", International Conference on Continuous Casting of Steel inDeveloping Countries (CCC'93), The Chinese Society for Metals, September 14-18,(1993), Beijing, China, 301-307.

27. K.A.R.El-Fawakhry, M.L. Mishreky, Mamdouh Eissa , O.I.H.Abdul Karim and H.S.El-Faramawy, "Production of high carbon ferrochromium from Egyptian chromiteore", Jordanian Chemical Engineering Conference 1, October 18-20, (1993), Amman,Jordan, Vol. II, 55-75.

28. K.A.R.El-Fawakhry, M.L. Mishreky, Mamdouh Eissa , O.I.H.Abdul Karim and H.S.El-Faramawy, "Utilization of Egyptian chromite ores in the production of extra lowcarbon ferrochromium", Jordanian Chemical Engineering Conference I, October 18-20, (1993), Amman, Jordan, Vol. II, 114-142.

29. Mamdouh Eissa, K.El-Fawakhry, W.Tayor, H.El-Faramawy and A.Ahmed, "FerrousOxide Activity in FeO-TiO2-CaO-MnO System", Scandinavian Journal of Metallurgy,Vol. 24, (1995), 168-175.http://www.scopus.com/inward/record.url?eid=2-s2.0-0029350247&partnerID=MN8TOARS

30. Mamdouh Eissa, K.El-Fawakhry, H.El-Faramawy and A.Fathy, "Production of ultrahigh strength wire rod steels by vanadium microalloying", Steel Research, Vol. 67,No. 3, (1996), 100-105.http://www.scopus.com/inward/record.url?eid=2-s2.0-0030105048&partnerID=MN8TOARS

31. Mamdouh Eissa, K.El-Fawakhry, W.Tayor, H.El-Faramawy and A.Ahmed, "FerrousOxide Activity in FeO-TiO2-CaO-Al2O3 System", Iron and Steel Institute of Japan(ISIJ) International, Vol. 36, No. 5, (1996), 512-516.http://www.scopus.com/inward/record.url?eid=2-s2.0-0030373558&partnerID=MN8TOARS

32. Mamdouh Eissa, K.El-Fawakhry, H.El-Faramawy and A. Fathy,"Vanadium- microalloyed high carbon steel", Transactions of Iron

and Steel Society (ISS), Iron and Steelmaker, Dec. (1996), 73-81.http://www.scopus.com/inward/record.url?eid=2-s2.0-2242442715&partnerID=MN8TOARS

33. M.Hegazy and Mamdouh Eissa, "Influence of microalloying on the corrosionresistance of steel in saturated calcium hydroxide", Metallurgical and MaterialsTransactions A, Vol. 27A, June (1996), 1701-1707.http://www.scopus.com/inward/record.url?eid=2-s2.0-0030165717&partnerID=MN8TOARS

34. F.M.Mohamed, H.El-Faramawy, Mamdouh Eissa, O.A.Mohamed and M.Shalabi, "Useof cement as a binder material in pelletization of chromate ore concentrates",Zeszyty Nankowe Politechniki Slashiej, (1996), 1349, 391-404.

20 | P a g e

35. Mamdouh Eissa, "Effect of slag foaming and lime injection in electric arc furnaceon steel quality", 1996 Electric Furnace Conference Proceedings, (1996), 123-128.

36. Mamdouh Eissa, K.El-Fawakhry,M.H.Ahmed, M.A.El-Zommor and M.M.Lamei,"Development of superior high strength low impact transition temperature steelsmicroalloyed with vanadium and nitrogen", Journal of Materials Science andTechnology, Vol. 5, No. 1, (1997), 3-19.

37. Mamdouh Eissa, K.El-Fawakhry, M.L.Mishreky, Abdul Hamid Hussein and A.Tawfik,"Low carbon manganese steels microalloyed with vanadium and nitrogen", SteelResearch, Vol. 69, No. 8, (1998), 334-342.http://www.scopus.com/inward/record.url?eid=2-s2.0-0032131178&partnerID=MN8TOARS

38. Mamdouh Eissa, H.El-Faramawy and G.Farid, "Production of high carbonferromanganese using manganese rich slag in the charge", Steel Research , Vol. 69,No.9, (1998), 273-280.http://www.scopus.com/inward/record.url?eid=2-s2.0-0032155318&partnerID=MN

39. Mamdouh Eissa, K.El-Fawakhry, M.L.Mishreky, H.El-Faramawy and T.Mattar,"Implementation of water cooled systems in small and medium electric arcfurnaces in Egypt", AISU 2nd International Symposium on “Electric Furnace”, Oct. 18-20, (1998).

40. K.El-Fawakhry, M.L.Mishreky and Mamdouh Eissa, "Acceleration of meltingunsorted scrap in EAF", AISU 2nd International Symposium on “Electric Furnace”,Oct. 18-20, (1998).

41. K.El-Fawakhry, Mamdouh Eissa and M.L.Mishreky, "Production of high strengthsteel for prestressed concrete using microalloying technology", AISU 2nd

International Symposium on “Electric Furnace”, Oct. 18-20, (1998).42. Mamdouh Eissa, K.El-Fawakhry, M.L.Mishreky, H.El-Faramawy and

T.Mattar, "Efficiency of water cooled systems in small and mediumelectric arc furnaces", The 56th Electric Furnace Conference, (1998), 79-86.

43. Mamdouh Eissa and Alaa El-Mohammadi, "Effect of physical properties of slag onsulphur removal mechanism during ESR process", Steel Research, Vol.69, No.10/11, (1998), 413-417.http://www.scopus.com/inward/record.url?eid=2-s2.0-1542466586&partnerID=MN8TOARS

44. Mamdouh Eissa, "Influence of base composition on the strength of vanadium-microalloyed steel bars", Steel Research, Vol.69, No.10/11, (1998), 438-445.http://www.scopus.com/inward/record.url?eid=2-s2.0-0000882845&partnerID=MN8T

45. Mamdouh Eissa, "Parameters affecting on manganese oxidation in top blown basicoxygen converter", Steel Research, Vol. 70, No.1, (1999), 9-14.

46. Mamdouh Eissa, T.Mattar and K.El-Fawakhry, "Nitrogen behavior during electro-slagremelting of tool steel", Proceedings of the 5th International Conference on Tooling “Tool Steels in the Next Century”, Sept. 29th – Oct. 1st (1999), University of Leoben,Leoben, Austria, Ed. F. Jeglistch, R. Ebner, H. Leitner, 275-284.

47. Taha Mattar, Hoda El Faramawy, Ayman Fathy, Mamdouh Eissa and Kamal ElFawakhry; “Optimization of desulphurization of tool steels during EAF and ESRprocesses”, Metal2001, Ostrava, Czech Republic, May 15th -17th,(2001).

21 | P a g e

48. Mamdouh Eissa, Hoda El-Faramawy, Taha Mattar, Ayman Fathy and Kamal El-Fawakhry; "Development of new grades of steel shots for casting cleaning" ,SteelResearch, V 73, Feb.( 2002), pp. 69-76.http://www.scopus.com/inward/record.url?eid=2-s2.0-0036475115&partnerID=MN8TOARS

49. Mamdouh Eissa and Taha Mattar; "Mechanical properties relationships in V- and Ti-microalloyed steels", Steel Research, V 73 (2002) No 9, pp. 403- 408.http://www.scopus.com/inward/record.url?eid=2-s2.0-0032648173&partnerID=MN8TOARS

50. Taha Mattar, Hoda El-Faramawy, Ayman fathy, Mamdouh Eissa and Kamal El-Fawakhry; "Effect of EAF and ESR technologies on the behavior of alloyingelements in tool steels", 6ITC, 6th International Tooling Conference, 10th -13th

September (2002), Karlstad, Sweden, pp. 345-354.51. Hoda El-Faramawy, Taha Mattar, Ayman Fathy, Mamdouh Eissa and Saied Ghali,

"Ferrosilicon magnesium production", Scandinavian Journal of Metallurgy SJM,(2003), 32, pp. 37-46.

DOI: 10.1034/j.1600-0692.2003.10600.x

52. Hoda El-Faramawy, Ayman Fathy, Emad Ewais, Mamdouh Eissa and Azza M. Ahmed;“Manganese distribution between FeO-MnO-SiO2CaO-MgO-Al2O3 slags andmolten iron”, Steel Research 74, (2003), No. 4, pp. 195-200.

53. Mamdouh Eissa, “Microalloyed Steel”, High Strength and Special Steels (H3S),Egyptian German Workshop, CMRDI, Cairo, Egypt, 28-30 Sep. (2003), pp. 61- 74.

54. Hoda El-Faramawy, Taha Mattar, Mamdouh Eissa, Kamal El-Fawakhry and AzzaAhmed, "Demanganization of high manganese pig iron to produce high manganeseslag", Ironmaking & Steelmaking, 1, February (2004), vol. 31, iss 1, pp. 23- 30.DOI: 10.1179/030192304225012123

55. Hoda El-Faramawy, Taha Mattar, Ayman Fathy, Mamdouh Eissa and Azza Ahmed,"Silicon manganese production from manganese rich slag", Ironmaking &Steelmaking 1, February (2004), vol. 31, iss 1, pp. 31- 36.DOI: 10.1179/030192304225012132

56. Mamdouh Eissa, Aymen Fathy, Azza Ahmed, Alla El- Mohammady and Kamal El-Fawakhry, " Factors affecting siliconmanganese production using manganese richslag in the charge" , Tenth International Ferroalloys Conference "INFACON X 2004",1-4 February (2004), Cape Town, South Africa, pp.245-253.

57. Ayman Fathy, Hoda El-Faramawy, Taha Mattar, Mamdouh Eissa and Wolfgang Bleck,“Phase Transformation in new low nickel cobalt free maraging steels”, 13th

International Metallurgical& Materials Conference Metal2004, Hardec and Moravici,Czech Republic, 18-20 May (2004), Symposium C article 211, pp. 1-13.

58. Taha Mattar, Hoda El-Faramawy, Ayman Fathy, Mamdouh Eissa, Kamal El-Fawakhry, "Improving the cleanliness of tool steel by ESR", Steel Grips 2 , (2004), No. 4, pp.287-290.

59. Taha Mattar, Azza Mohamed Ahmed, Mamdouh Eissa, Mahmoud Farag El-Demerdashand Hossam Halfa," Nitrogen behaviour during ESR of conventional and new gradeof AISI M41 high speed steel", High Nitrogen Steel Conference" HNS2004", Ostend,Belgium, Steel Grips, 19-22 September (2004), pp. 363-370.

22 | P a g e

60. Ayman Fathy, Hoda El-Faramawy, Azza Ahmed and Mamdouh Eissa, "Effect of alloying elements and age hardening on the peak hardness precipitation inlow nickel cobalt free maraging steel", Steel Grips 2 , (2004), No. 6, pp.433-440.

61. Azza Ahmed, Ayman Fathy, Hoda El-Faramawy and Mamdouh Eissa, "Effect of slagproperties on non-metallic inclusions during ESR of nitrogen alloyed andconventional AISI M41 high speed steel", TIMS Bulletin, Vol.86, July (2005), pp.46-60.

62. Mamdouh Eissa, Ayman Fathy, Azza Mohamed Ahmed, Taha Mattar and Ismail Saad ,"Treatment of high manganese hot metal for further processing in oxygenconverter" , Proceedings of 5th European Oxygen Steelmaking Conference "EOSC2006", 26-28 June (2006), Aachen, Germany, pp. 23-37.

63. Mamdouh Eissa , Taha Mattar, Ayman Fathy, Mohamed Kamal and FaheimNassar,"Effect of physical properties and chemical composition of ESR on thecleanliness and properties of a new grade of maraging steel", 45th AnnualConference of Metallurgist of CIM, October 1-4, (2006), Montreal, Quebec, Canada,Proceedings of the International Symposium in "Advanced Steels", Edited by J, Szpunarand H. Li, pp. 39-50.

64. Azza Ahmed, Taha Mattar, Ayman Fathy, Hoda El-Faramawy and MamdouhEissa,"Solid state nitriding of high and medium carbon ferromanganese", CanadianMetallurgical Quarterly, Vol. 45, No.4, (2006), pp. 493-297.http://www.scopus.com/inward/record.url?eid=2-s2.0-33750425360&partnerID=MN

65. Ayman Fathy, Azza Ahmed, Hoda El-Faramawy, and Mamdouh Eissa, "Behaviour ofprecipitates and inclusions during ESR of nitrogen alloyed and conventional AISIM41 high speed steel", Steel Grips, 4 (2006) No. 4, pp. 298-304.

66. Ayman Fathy, Azza Ahmed, Alaa El-Mohammady, Mamdouh Eissa and Kamal El-Fawakhry, "Factors affecting silicomanganese production using manganese richslag in the charge", Steel Research International, 78(2007), No. 1, pp. 24-30.http://www.scopus.com/inward/record.url?eid=2-s2.0-33846854865&partnerID=MN8TOARS

67. Mamdouh Eissa and Saeed Ghaly, "Development of high nitrogen austenitic stainlesssteel by melting under high pressure technique", German – Egyptian Workshop on"Materials Based Manufacturing Technologies", May 7th -9th (2007), CMRDI, Helwan,Cairo, Egypt.

68. Mamdouh Eissa, "Contribution of Steel Technology Department in Steel andFerroalloys R&D", 12th International Conference on Aerospace Science and AviationTechnology "ASAT", 29 – 31 May (2007), Military Technical College, Kobry El-Kobba,Cairo, Egypt.

69. Taha Mattar, Ayman Fathy, Mamdouh Eissa, Fahim Nassar and Mohamed Kamal, "Roleof refining process in improving the properties of new developed grades ofmaraging steels", Proceedings of 7th International Conference in "Clean Steel", 4-6June (2007), Balatonfured, Hungary, pp. 498-507.

70. Kamal El-Fawakhry, Ahmed El-Sheikh, Mamdouh Eissa and Hossam Halfa:"Effect of nonmetallic inclusions on the mechanical properties of 12 Ni- 5Cr- 3 Mo- X Ti free cobalt maraging steel", Metals Processing andManufacturing Conference, MPM 2007, 19-22 Nov. (2007), Cairo, Egypt.

23 | P a g e

71. Hoda El-Faramawy, Mamdouh Eissa, Ahmed Zaky, Faheim Nassar andMohamed El-Fawakhry, "Development of unleaded free cutting steels",Metals Processing and Manufacturing Conference, MPM 2007, 19-22 Nov.(2007), Cairo, Egypt.

72. Azza Ahmed, Mamdouh Eissa, Kamal El-Fawakhry and Hoda El-Faramawy,"Effect of Al2O3 and MnO additions in the titanate slag systems on theFeO activity and titanium equilibrium distribution" , Metals Processing andManufacturing Conference, MPM 2007, 19-22 Nov. (2007), Cairo, Egypt.

73. Mamdouh Eissa and H.El-Faramawy, "Production of ferroalloys from Egyptian ores",The First International Forum on Economics of Mineral Resources in the Arab WorldFocusing on Processing, Manufacturing and Export, 1 – 3 January (2008), Cairo, Egypt.

74. Taha Mattar, Kamal El-Fawakhry, Hossam Halfa and Mamdouh Eissa, "Effect ofnitrogen alloying on sulphur behaviour during ESR of AISI M41 steel", SteelResearch International, 79 (2008), No.9, pp.691 – 697. DOI: 10.2374/SRI07SP077-79-2008-691

75. Mamdouh Eissa, Kamal El-Fawakhry and Saeed Ghali, "Advanced Stainless SteelsContaining up to 0.5% Nitrogen", The 47th Conference of Metallurgists "COM 2008",Symposium on "Recent Development in Advanced High Strength Steels Processing",August 24-27, (2008), Winnipeg, Manitoba, Canada.

76. Saeed Ghali, Hoda El-Faramawy and Mamdouh Eissa, "A Model for Prediction of MgContent in FeSiMg Alloy Produced by Reduction of Magnesium Oxide", Mineral toMaterial Conference, M2M08, 15-18 Dec.,(2008), Cairo, Egypt.

77. Mamdouh Eissa, Kamal El-Fawakhry and Michal Mishreky, "Energy Saving in EAFSteelmaking Process", First International Conference of Energy Engineering "ICEE-1", Dec. 29-31, (2008), Aswan, Egypt.

78. Ayman Fathy, Hossam Halfa, Mohammed Kamal, Mamdouh Eissa and Kamal El-Fawakhry, "The effect of strong deoxidation on properties and morphology of theformed NMI of resulphurised steel", The 1st International Joint Conference onMaterials Science, Nanotechnology and Health Technology -MNH 09- FutureChallenges, National Research Centre (NRC), January 4 – 6, (2009).

79. Hossam Halfa, Ayman Fathy, Mohammed Kamal, Mamdouh Eissa and Kamal El-Fawakhry, "Enhancing of mechanical properties of new and developed Ti-containing free cobalt low nickel maraging steel produced by electroslag refiningtechnology", The 10th International Conference on Chemistry and Its Role inDevelopment "10ICCRD', Mansoura-Sharm El-Sheikh, March 16–20, (2009).

80. Mamdouh Eissa, Hoda El-Faramawy, Ayman Fathy, Kamal El-Fawakhry, MohamedKamal and Faheim Nassar, "Modification of non-metallic inclusions in free cuttingsteel by calcium addition", 11th International Conference on Mining, Petroleum andMetallurgical Engineering "MPM11", 15 – 19 March, (2009), Sharm El-Sheikh.

81. Saeed Ghali, Mamdouh Eissa and Taha Mattar ,"New grades of austenitic stainlesssteel with high nitrogen content", 10-th International Conference on High NitrogenSteels "HNS 2009", 6 – 9 July, (2009), Moscow, Russia.

82. Mamdouh Eissa, "Ready-to-imlement research projects in the field of steelmaking",Proceeding of the First Scientific Conference for Marketing the Applied UniversityResearch, "Academic Research for the Service of Industry", 7 – 8 October, (2009),pp.383-388, Menoufiya University.

24 | P a g e

83. Hossam Halfa, Mamdouh Eissa and Ayman Fathy, "Innovative grades of ultra-highstrength high ductility martensitic steel ", Proceeding of the First ScientificConference for Marketing the Applied University Research, "Academic Research for theService of Industry", 7 – 8 October, (2009), pp.325-335, Menoufiya University.

84. Raaft Farahat, Mamdouh Eissa, Gamal Megahed, Ayman Fathy and Amin Baraka,"Recycling of mill scale waste in electric arc furnace ", Proceeding of the FirstScientific Conference for Marketing the Applied University Research, "AcademicResearch for the Service of Industry", 7 – 8 October, (2009), pp.391-399, MenoufiyaUniversity.

85. Saeed Ghali, Mamdouh Eissa and Kamal El-Fawakhry ,"Nitrogen solubility instainless steels", International Conference on the Advances in Theory of Ironmakingand Steelmaking , 9-11 December, (2009), Bangalore, India.

86. Saeed Ghali, Mamdouh Eissa, Hoda EI-Faramawy, Taha Mattar and Ayman Fathy,"Influence of heat treatment on mechanical properties of stainless steels", 1st

Mediterranean Conference on Heat Treatment & Surface Engineering,"Heat Treatmentand Surface Engineering in the Manufacture of Metallic Engineering Components",December 1 – 3, (2009), Sharm El-Sheikh, Egypt.

87. Hossam Halfa, Mamdouh Eissa, Kamal El-Fawakhry and Taha Matter, " Effect ofNiobium and Nitrogen Addition on Secondary Hardening Temperature of SuperHard AISI M41 High Speed Tool Steel", 1st Mediterranean Conference on HeatTreatment & Surface Engineering, "Heat Treatment and Surface Engineering in theManufacture of Metallic Engineering Components", December 1 – 3, (2009), Sharm El-Sheikh, Egypt.

88. Raaft Farahat, Mamdouh Eissa, Gamal Megahed and Amin Baraka, " Reduction of millscale generated by steel processing", Steel Grips, 8 (2010), pp.88-92.

89. Mamdouh Eissa, Kamal El- Fawakhry, Michel Mishreky and Hoda EI-Faramawy, "Thealuminothermic production of extra low carbon ferrochromium from low gradechromite ore", INFACON XII, June 6-9, (2010) , Helsinki, Finland, pp.431-438.

90. Saeed Ghali, Kamal El-Fawakhry, Mamdouh Eissa and Michel Mishreky, "Kinetic ofnitriding process of ferromanganese alloy", INFACON XII, June 6-9, (2010),Helsinki, Finland, pp.611-617.http://www.scopus.com/inward/record.url?eid=2-s2.0-84866085641&partnerID=MN8TOARS

91. Hossam Halfa, Ayman Fathy, Taha Matter, and Mamdouh Eissa, "Effect of secondaryrefining process and molybdenum content on the mechanical properties of 0.65 Ticobalt free maraging steel", The 2nd International Conference SUPER-HIGHSTRENGTH STEELS "SHSS" - Peschiera del Garda (Verona) - Italy, 17-20 October(2010).

92. Hossam Halfa, Ayman Fathy, Mohamed Kamal, Mamdouh Eissa and Kamal El-Fawahkry, "Enhancement of mechanical properties of developed Ti-containing Co-free low-Ni maraging steel by ESR", STEEL GRIPS 8 (2010),pp.278-284.

93. Mamdouh Eissa,"Production of Ferroalloys - Role of Scientific Research", Journal ofIndustry and Future, 60, (2010), pp.10-11.

94. Mamdouh Eissa,"Production of Ferroalloys - Utilization of Egyptian ores andindustrial wastes in production of ferroalloys", Journal of Industry and Future, 61,(2010), pp.10-12.

25 | P a g e

95. Mamdouh Eissa, Ahmed Abd El-Aziz, Saeed Ghaly, Hossam Halfa and Shady Saber, "Effect of microalloying additions on the microstructure and mechanical propertiesof low carbon steel", Journal of Iron and Steel Research International, (2011), 18(Supplement 1-1), pp.246-251.

96. Saeed Ghali, Fathy Baiomy, Mamdouh Eissa, “Investigation the effect of nitrogen onoxidation behavior of stainless steel”, 7th European Conference on Stainless Steels -Science and Market - Como - Italy, 21-23 September (2011).http://www.scopus.com/inward/record.url?eid=2-s2.0-84909608159&partnerID=MN8TOARS

97. Azza Ahmed, Saeed Ghali, Mamdouh Eissa and Salah El-badry, “Influence of partialreplacement of nickel by nitrogen on microstructure and mechanical properties ofaustenitic stainless steel", Journal of Metallurgy, Volume 2011 (2011), pp.1-6.

98. Mamdouh Eissa , Madeha Hegazy, Ayman Fathy, Gamal El-Mahdy and Fouad Sayed,“Effect of titanium and vanadium microadditions on the mechanical properties andmicrostructure of hot deformed steels”, TIMS Bulletin, Vol.98, July (2011),pp.50-69.

99. Madeha Hegazy, Mamdouh Eissa, Gamal El-Mahdy, Ayman Fathy and Fouad Sayed,“IInnfflluueennccee ooff mmiiccrrooaallllooyyiinngg eelleemmeennttss aaddddiittiioonn oonn tthhee ccoorrrroossiioonn rreessiissttaannccee ooffrreeiinnffoorrcceedd ccaarrbboonn sstteeeell iinn aa ssiimmuullaatteedd ccoonnccrreettee eennvviirroonnmmeenntt””,, Egyptian Journal ofChemistry, 54, No.3, (2011), pp.389-409..http://www.scopus.com/inward/record.url?eid=2-s2.0-84875589873&partnerID=MN8TOARS

100. Hossam Halfa, Mamdouh Eissa , Kamal El-FawaKhry and Taha Mattar, “Effect ofNitrogen and Niobium on the Structure and Secondary Hardening of Super HardHigh Speed Tool Steel", Steel Research International, Vol.83, Issue 1, January (2012),pp.32-42.DOI: 10.1002/srin.201100094

101. Mamdouh Eissa, Hoda El-Faramawy , Azza Ahmed, Saeed Ghali and HossamHalfa, "Parameters affecting on the production of high carbonferromanganese in closed submerged arc furnace", The Journal of Mineralsand Materials Characterization and Engineering,Vol.11, No.1, (2012), pp.1-20.

102. Mamdouh Eissa and Hoda EI-Faramawy, "Carbothermic smelting of high carbonferrochromium alloy from low- and high-grade chromite ores", Ironmaking andSteelmaking, Vol.39, No.1, (2012), pp.31-37. DOI: 10.1179/1743281211Y.0000000047

103. Mamdouh Eissa, Hoda El-Farmawy and Mohamed Kamal, “Influence of calciumtreatment on non-metallic inclusion morphology and mechanical properties of Pb-free resulphurized machinable steel”, Steel Grips 10 (2012), pp.274-279.

104. Mamdouh Eissa, Saeed Ghali, Azza Ahmed and Hoda EI-Faramawy, "Optimumcondition for smelting high carbon ferromanganese", Ironmaking and Steelmaking,Vol.39, No.6, (2012), pp.419-430.DOI: 10.1179/1743281211Y.0000000062

105. Saeed Ghali, Mamdouh Eissa and Hoda El-Faramawy, “Validation of FeSiMgalloy production model for the experimental process”, Journal of Metallurgy,Vol.2012 (2012) ID 176968, 6 pages.

110066.. Ayman Fathy, Hossam Halfa, Mohamed Kamal, Mamdouh Eissa and Kamal El-Fawahkry, "The effect of strong deoxidation on the properties and morphology ofNMI formed in resulphurizing steels", Steel Grips, 10, (2012), pp.284-288.

26 | P a g e

107. Mamdouh Eissa, Madeha Hegazy, Ayman Fathy, Gamal El-Mahdy and Fouad Sayed,"Economically attractive high strength steel bars using single microaddition oftitanium or vanadium", Asia Steel International Conference 2012 (Asia Steel 2012) ,Sept. 23- 27, (2012), Beijing , China .

110088.. Hossam Halfa and Mamdouh Eissa, "Innovative Method for Producing FunctionallyGradient Steel for High Corrosion Resistance Application", Metal 2012, 23- 25. 5.(2012), Brno, Czech Republic, EU..

109. Mamdouh Eissa,"Production of steel shots used in cleaning castings, processing ofmetallic surfaces and cutting of granite stones - An invitation to invest in a vitalproject ", Journal of Industry and Future, 69, December (2012), pp.18-19.

110. Hossam Halfa, Taha Mattar and Mamdouh Eissa, "Precipitation Behavior of Modifiedas Cast High Nitrogen Super Hard High-Speed Tool Steel", Steel ResearchInternational, Vol.83, Issue 11, November (2012), pp.1071-1078.DOI: 10.1002/srin.201100228

111. G. A. El-Mahdy, M. M. Hegazy, Mamdouh Eissa, A. M. Fathy, F. M. Sayed, N. El-Manakhly and Hamad –Al-Lohedan, “Influence of Heat and Laser Treatments on theCorrodibility of the Reinforced Carbon Steel”, Int. J. Electrochem. Sci., 7 (2012),pp.6677 – 6692.http://www.scopus.com/inward/record.url?eid=2-s2.0-84865067223&partnerID=M

112. G. A. El-Mahdy, Ayman M Atta, M. M. Hegazy, Mamdouh Eissa, A. M. Fathy, F. M.Sayed A.K.F. Dyab and Hamad –Al-Lohedan, “Microscopic Studies on The CorrosionResistance of Reinforced Carbon Steel”, Int. J. Electrochem. Sci., 7 (2012), pp.8597 –8611.http://www.scopus.com/inward/record.url?eid=2-s2.0-84872861929&partnerID=MN8TOARS

113. Saeed N. Ghali, Hoda S. El-Faramawy, Mamdouh M. Eissa, “Influence of BoronAdditions on Mechanical Properties of Carbon Steel”, Journal of Minerals andMaterials Characterization and Engineering "JMMCE”, Vol.11, October (2012), pp.995-999

114. Mamdouh Eissa, Hoda EI-Faramawy,Taha Mattar, Ayman Fathi, Azza Ahmed, SaeedNabil, Mohammed Kamal, “A new grade of steel shots for casting cleaning andsurface preparation”, ARABCAST 2012, 16-19 November, (2012), Sharm El-Sheikh,Egypt.

115. Mohamed Kamal, Mamdouh Eissa, Hoda El-Farmway, “Effect of Si-Al and Cadeoxixizers on the properties of free lead free-cutting steel”, ARABCAST 2012, 16-19 November, (2012), Sharm El-Sheikh, Egypt.

116. Hoda S. El-Faramawy, Saeed N. Ghali, Mamdouh M. Eissa, " Effect of TitaniumAddition on Behavior of Medium Carbon Steel", Journal of Minerals and MaterialsCharacterization and Engineering, (2012), 11, pp.1108-1112.

117. Saeed N. Ghali, Mamdouh M. Eissa, Micheal L. Mishreky,”Activation energy ofnitriding medium carbon ferromanganese alloy”, Journal of Iron and Steel Research,International, Vol.20, Issue 1, January (2013), pp.58-78.DOI: 10.1016/S1006-706X(13)60045-X

118. Mamdouh Eissa," Scientific Research for the Service of Steelmaking Industry",Journal of Industry and Future, 70, March (2013), pp.12-13.

119. S.Ghali, Mamdouh Eissa, Hoda El-Faramawy, M.Mishreky, T.Mattar, "New grades of

27 | P a g e

stainless Steel", International Conference on Advances in Refractories and Clean SteelMaking (ARCS), 6, (2013), Ranchi, India.

120. Mamdouh Eissa and Azza Ahmed, "Utilization of mill scale waste toproduce high purity iron", International Conference on "Science andTechnology of Ironmaking and Steelmaking" (STIS 2013), 16-18 December,(2013), Jamshedur, India.

121. Saeed Nabil Ghali, Mamdouh Eissa, Hoda El-Faramawy, Azza Ahmed, TahaMattar and Michael Mishreky, "Production and Application of Advanced HighNitrogen Steel", International Conference on "Science and Technology ofIronmaking and Steelmaking" (STIS 2013), 16-18 December, (2013),Jamshedur, India.

122. H.Halfa, M. Eissa, A.Fathy, "ELECTROSLAG REMELTED ULTRA-HIGHSTRENGTH HIGH DUCTILITY MARTENSITIC STEEL", Metal 2013, 1517.5.(2013), Brno, Czech Republic, EU

123. Mohamed. K. El-Fawkhry, Ayman. M. Fathy, and Mamdouh Eissa, “Effect of Ca-Simodifiers on the carbide precipitation of as cast Hadfield steel”, Steel ResearchInternational,Vol.84, 5, (2014), pp.885-890. DOI: 10.1002/srin.201300068

124. Azza Ahmed, Saeed Ghali, Mohamed K. El-Fawakhry, Hoda El-Faramawy andMamdouh Eissa, "Silicomanganese production utilizing local manganeseores and manganese rich slag", Ironmaking and Steelmaking, 41, 4, (2014),pp.310-320.DOI: 10.1179/1743281213Y.0000000173

125. M.K.El-Fawkhry, A.M.Fathy, Mamdouh Eissa, H.S El-Farmway, “Eliminatingheat treatment of Hadfield steel in stress abrasion wear applications”,International Journal of Metal Casting (IJMC), Vol.8, Issue 1, (2014), pp.29-36.http://www.scopus.com/inward/record.url?eid=2-s2.0-84893107621&partnerID=MN8TOARS

126. Mamdouh Eissa, "Ready-to-Implement Research Projects In the Field ofSteelmaking and Ferroalloys Industries", International Conference on IndustryAcademia Collaboration "IAC 2014", 3-5 March (2014), Fairmont Heliopolis, Cairo,Egypt.

127. Mohamed Abd Elkader, Ayman Fathy, Mamdouh Eissa, Sayed Shama, Gamal Megahedand Abdelazeem El-Sharkawy, "Effect of direct-reduced iron percentage in EAFmetallic charge on steel making parameters and mechanical properties of lowcarbon steel", International Conference on Industry Academia Collaboration "IAC2014", 3-5 March (2014), Fairmont Heliopolis, Cairo, Egypt.

128. M.K.El-Fawakhry, A.Shash, Mamdouh Eissa, Sh. Ali, T.Mattar, "Application ofnanotechnology in developing metals industry: role of nanoinculant / nanomodifiersin improving steel properties", Nanomaterials Synthesis, Fabrication and Applications,(Nanotech Challenges 2014), 14-17 April (2014), Cairo, Egypt.

129. Ayman Fathy and Mamdouh Eissa, "Nano-Size Precipitates and IntermetallicCompounds in Vanadium - Titanium Microalloyed and Modified Low NickelCobalt Free Maraging Steels", Nanomaterials Synthesis, Fabrication and Applications,(Nanotech Challenges 2014), 14-17 April (2014), Cairo, Egypt

130. Azza Ahmed, Mohamed.K.El -Fawkhry, Hossam Halfa, Hoda Farmway, andMamdouh Eissa, “Parameters affecting energy consumption for producing

28 | P a g e

high carbon ferromanganese in a closed submerged arc furnace”, Journalof Iron and Steel, International, 21, 7, (2014), pp.666-672.DOI: 10.1016/S1006-706X(14)60103-5

131. S.Ghali, Mamdouh Eissa, H.El-Faramawy, “Simulation of austenitic stainlesssteel oxidation containing nitrogen at temperature range 500°C-800°C”,International Journal of Statistics and mathematics, vol1, 3, August (2014),pp.24-32.

132. Mamdouh Eissa, Azza ahmed, Mohamed K. El-fawakhry, Rabab Abo-Shohba,Seham Shahein, “Recycling of mill scale waste produced from basic oxygenconverter process into stainless steel alloy”, The 7th European OxygenSteelmaking conference, Trinec, Czech Republic, 9-11 September (2014).

133. M.Abd ElKader, A.Fathy, G.Megahed, Mamdouh Eissa, S.Shama and A.Ell-Sharkawy, “Influence of direct-reduced iron in charge mix on EAF operationperformance”, 12th International conference on Mining, Petroleum andMetallurgical Engineering "MPM12", Suez University, 20-22 October (2014).

134. S.Ghali, M.Kamal, Mamdouh Eissa and H.El-Faramawy, “Nitrogen steel”, 12thInternational conference on Mining, Petroleum and Metallurgical Engineering"MPM12", Suez University, 20-22 October (2014).

135. S.Ghali, Mamdouh Eissa and H.El-Faramawy, “High nitrogen high carbonlow manganese stainless steel”, Steel Grips, (2014), pp.18-24.

136. Mamdouh Eissa, Micheal L. Mishreky, "Utilization of Baharya high manganese ironore", Journal of Industry and Future, 76, September (2014), pp.20-22.

137. Mamdouh Eissa, Azza Ahmed, and Mohamed El-Fawkhry, "Conversion of Mill ScaleWaste into Valuable Products via Carbothermic Reduction", Journal of Metallurgy,Volume 2015 (2015), Article ID 926028, 9 pages,http://dx.doi.org/10.1155/2015/926028.

138. Mohamed Kamal El Fawkhry, Ayman Mohamed Fathy and MamdouhMahmoud Eissa, "New Energy Saving Technology for Producing Hadfield Steelto High Gouging Applications", steel research international, Volume 86, Issue3, March (2015), pp.223–230. DOI: 10.1002/srin.201300388.

139. Mamdouh Eissa, Micheal L. Mishreky, "Water cooling of electric arc furnacesapplied in steelmaking as an alternative to refractories", Journal of Industry andFuture, 78, March (2015), pp.14-15.

140. Mamdouh Mahmoud Eissa, Maged Mahmoud Kassab, Samir Uoshaa El-Kameesy, Ahamed Abdel-Latif Mohamed, "Investigation of a Modified Cobalt-Free Alloy for Nuclear Application", Journal of Materials Science and ChemicalEngineering, Vol.3, No.9, September (2015), pp.52-56.DOI: 10.4236/msce.2015.39007.

141. M. M. Kassab, S. U. El-Kameesy, M. M. Eissa, A. Abdel-Latif M, "A Study ofNeutron and Gamma-Ray Interaction Properties with Cobalt-Free HighlyChromium Maraging Steel", Journal of Modern Physics, Vol.6 No.11, September(2015), pp.1526-1532.DOI: 10.4236/jmp.2015.611156.

142. M. A. Elkader, A. M. Fathy, G. M. Megahed, M. M. Eissa, S.A. Shama and A. M. El-Sharkawy "Influence of direct-reduced iron percentage in EAF charge mix on EAFoperation parameters", Steel Grips, (2015), pp.13-22.

29 | P a g e

143. M.K. El-Fawkhry, M. Eissa, A. Fathy, T. Mattar, "Development of maraging steel withretained austenite in martensite matrix", Materials Today: Proceedings 2S ( 2015 )S711 – S714.doi: 10.1016/j.matpr.2015.07.381.

144. R. Farahat, M. Eissa, G. Megahed and A. Baraka, "Utilization of Mill Scale in ElectricArc Furnace to Improve Material Yield", International Conference on IndustryAcademia Collaboration "IAC 2015", 7-9 April (2015), Cairo, Egypt.

145. Mamdouh Eissa, "Conversion of steel industry waste into valuable products",

Journal of Industry and Future, 79, June (2015), pp.16-17.

146. Ayman Fathy, Hossam halfa, Mohamed K Elfawakhry, Mamdouh Eissa and TahaMattar, "Effect of steel composition and slag properties on the efficiency of ESR inclean steel production", 9th International Conference on Clean Steel, 8 - 10 September(2015), Budapest, Hungary.

147. M. Eissa, A.Ahmed, M.K.El-Fawakhry, R.Abo-Shohba, S.Shahein, "Conversion of millscale waste into valuable iron-chromium alloy using alumino-thermic and alumino-silico-thermic processes", 18th. International Symposium on Self-Propagating HighTemperature Synthesis "SHS XIII", October 12th to 16th, (2015), Antalya, Turkey.

148. Mamdouh Eissa, "Scientific research in steelmaking and ferroalloys industry",Journal of Industry and Future, 80, September (2015), pp.10-12.

149. Azza Ahmed, Mohamed K. El-Fawakhry, Mamdouh Eissa and Taha Mattar, "Thermalcompatibility of chromium steel as metallic interconnects for solid oxide fuel cells",Journal of Basic and Applied Research Internatinal, Vol. 14, Issue 2, (2015), pp.90-100.

150. S. Ghali , M. Eissa and H. El-Faramawy, "Activation energy of nitriding 0.23%Cferromanganese", 14th International Ferroalloys Congress "INFACON XIV", May 31-June 4, 2015, Kiev, Ukraine, pp.511-517.

151. A. Ahmed, M.K. El-Fawakhry, Mamdouh Eissa and S.Shahein, "Direct chromiumalloying by smelting reduction of mill scale and low grade chromite ore",Ironmaking & Steelmaking, 42, 9, 10, (2015), pp.648-655.DOI: 10.1179/1743281215Y.0000000008

152. Mamdouh Eissa, S. Ghali and A. Ahmed, "Analysis of hot rolling variablescontributions on grain refinement and mechanical properties of V- and Ti-microalloyed steels", Journal of Basic Applied Research Internatinal, 15, 2, (2015),pp.115-130.

153. M. M. Eissa, S. U. El-kameesy, S. A. El-Fiki, R. M. El Shazly, S. N. Ghali, A.R. El-Sersy, Aly Saeed, "The attenuation capability of selected steel alloys for nuclearreactor applications", Journal of Advances in Physics, Vol.11, No.3, December 07,(2015), pp.3139-3145.

154. Mamdouh Eissa, A. Ahmed, M. K. EL-Fawakhry, L. A. Kamal and S. Shahein,"Valuable Iron-Chromium Alloy Starting From Mill Scale Waste Using SelfPropagation Technique", Journal of Basic and Applied Research International,Vol. 16, Issue 1, (2016), pp. 44-56.

155. Mohamed K Elfawakhry, Ayman Fathy, Mamdouh Eissa and Taha Mattar, "Effect ofsteel composition and slag properties on NMI in clean steel production", MATECWeb of Conferences 39, 02002 (2016), pp.1-5.http://dx.doi.org/10.1051/matecconf/20163902002

30 | P a g e

156. Mohamed Abd Elkader, Ayman Fathy, Mamdouh Eissa, Sayed Shama, "Effect ofDirect Reduced Iron Proportion in Metallic Charge on Technological Parametersof EAF Steelmaking Process", International Journal of Science and Research (IJSR),Volume 5, Issue 2, February (2016), pp.2016-2024.

157. Mohamed El-Fawakhry, Emad Mubarak, Islam Salem Mamdouh Eissa and Taha Mattar,"Technology package for hot work tool steel production by nanotechnology", The8th International Conference on Nanotechnology in Construction (NTC 2016), 12-16March (2016), Sharm El-Sheikh, Egypt.

158. S.Ghali and M.Eissa, "Influence of different parameters on compression strength offoam steel produced by slip reaction foam sintering", Ironmaking & Steelmaking,(2016),http://dx.doi.org/10.1080/03019233.2016.1242929

159. M.M.Eissa , S.U.El-kameesy, , S.A.El-Fiki, S.N.Ghali, R.M.El Shazly, Aly Saeed,"Attenuation capability of low activation-modified high manganese austeniticstainless steel for fusion reactor system", Fusion Engineering and Deaign, 112 (2016),pp.130-135.DOI: 10.1016/j.fusengdes.2016.08.002

160. M.M. Eissa, S.U. El-Kameesy, M.M. Kassab, A. Abdel-Latif, “Study on neutron andgamma-ray interaction properties with cobalt-free martensite steel”, The NuclearMaterials Conference “NuMat2016”, 7-10 November, (2016), Montpellier, France.

161. S.Ghali, F.Baiomy, Mamdouh Eissa, H.El-Faramawy and T.Mattar “Activation Energyof Oxidation Process of Developed High Nitrogen Stainless Steel”, The5th International Conference (33rd Annual) on Corrosion Mitigation and SurfaceProtection Technologies, 12-15 December (2016), Steigenberger Hotel - Luxor, Egypt.

162. S. U. El-kameesy, M. M. Eissa, S. A. El-Fiki, R. M. El Shazly, S.N. Ghali, and A. Saeed,"A Phenomenological Study on the Gamma Rays Attenuation Properties ofDeveloped Steel Alloys", Arab Journal of Nuclear Science and Applications, 50 (1), (1-9), (2017).

163. S. Ghali, H. El-Faramawy, M. Eissa, and A. Ahmed, "Influence Parameters onNitriding Process of Ferromanganese Alloy", Advances in Materials Science andEngineering, Volume 2017, Article ID 6398072, 13 pages,https://doi.org/10.1155/2017/6398072

164. Taha Mattar, Mamdouh Eissa and Saeed Ghali, "Special Steels in Egypt MarketNeeds and Local Production", Arab Steel Summit 2017, 24- 26 October (2017),Casablanca- Morocco.

165. M.Eissa, H.El-Faramawy, T.Mattar, A.Ahmed ,S.Ghali, M.Elewa, "Conversion of millscale waste into high purity pig iron suitable for ductile cast iron production",EGYCAST 2017, 27- 30 October (2017) Sharm El-Shiekh – Egypt.

166. M.Eissa, H.El-Faramawy, T.Mattar, A.Ahmed, S.Ghali, M.El-Fawkhry, "Production ofsteel shots and steel grits for castings cleaning and surfaces preparation",EGYCAST 2017, 27- 30 October (2017), Sharm El-Shiekh – Egypt.

167. M.Eissa, H.El-Faramawy, T.Mattar, A.Ahmed ,S.Ghali, M.El-Fawkhry, "CMRDIcontribution in maximizing the utilization of local mineral ores and industrial wastein the production of ferroalloys", EGYCAST 2017, 27- 30 October (2017), Sharm El-Shiekh – Egypt.

168. M.Eissa, G.Hendawy, M.A.Yehia, T.Mattar, A.Ahmed ,S.Ghali, M.Oraby, A.Farghly,

31 | P a g e

"Utilization of Egyptian Low Grade Manganese Ore to Produce Silicomanganeseand Pig Iron at Sinai Manganese Company", EGYCAST 2017, 27- 30 October(2017), Sharm El-Shiekh – Egypt.

169. M. K. El Fawkhry, M.M. Eissa, "New as-cast high manganese steel with excludingheat treatment process", EGYCAST 2017, 27- 30 October (2017), Sharm El-Shiekh –Egypt.

170. Mamdouh Eissa, Gamal Megahed, Mohamed S. El-Deab, Ayman Fathy, SohaA. Abdel – Gawad. Raafat Farahat, "Experimental determination of MgOsaturation level in EAF slag", EGYCAST 2017, 27- 30 October (2017), Sharm El-Shiekh – Egypt.

171. Islam Salem, M. Elfawakhry , Mamdouh Eissa , Abdelhakim Kandil and Taha Mattar,"Development of innovative steel and ferrous alloys by Nano modifiers",EGYCAST 2017, 27- 30 October (2017), Sharm El-Shiekh – Egypt.

172. Mamdouh Eissa, Saeed Ghali, Azza Ahmed, "Energy saving in production ofhigh carbon ferromanganese", Accepted for The 4th International Conferenceon Energy Engineering (ICEE-4), 26-28 December, (2017), Aswan, Egypt.

173. Aly Saeed, M. M. Eissa, S. U. El-Khameesy, "Modified Cobalt Free Ultra-HighStrength Maraging Steel Alloys for Nuclear Reactor Pressure Vessel",Accepted for The 4th International Conference on Energy Engineering (ICEE-4),26-28 December, (2017), Aswan, Egypt.

174. F.M.El-Hossary, S.U.El-kameesy, M.M.Eissa, Al-Zahraa A.Abd Elmula, AlySaeed, Samah .A .Al-Shelkamy, "Effect of Plasma Surface Treatment on AISI316LStainless Steel for In-Core Applications of Nuclear Reactors",Accepted for The 4th International Conference on Energy Engineering (ICEE-4),26-28 December, (2017), Aswan, Egypt.

175. M.K. El Fawkhry, M. M. Eissa, "New energy saving technology for producinghigh manganese steel for stress abrasion wear applications", Accepted forThe 4th International Conference on Energy Engineering (ICEE-4), 26-28December, (2017), Aswan, Egypt.

176. Mamdouh Eissa, Gamal Megahed, Mohamed S.El-Deabm, Ayman Fathy,Soha A. Abdel - Gawad, Raafat Farahat, "Effect of slag chemistry on energyconsumption in EAF" , Accepted for The 4th International Conference onEnergy Engineering (ICEE-4), 26-28 December, (2017), Aswan, Egypt.

177. Mamdouh Eissa, "High-strength, lightweight steel...Ideal solution for safer,fuel-efficient and less polluting vehicles", Journal of Industry and Future, 87,September (2017), pp.8-9.

178. Mohammed Ali, Mamdouh Eissa, Hoda El faramawy, Fathy El Shahhat, DavidPorter, Jukka Kömi and Taha Mattar, "Electroslag Refining of CrNiMoWMnVUltrahigh Strength Steel", Journal of Minerals and Materials Characterizationand Engineering (JMMCE), (2017), 5, pp.385-407.https://doi.org/10.4236/jmmce.2017.56032

179. I.M. Ghayad, M. Eissa, S. Nabil, M.K. Abd-Rabouh, Azza M. Ahmad, S.Mamdouh and N. Nassif, "Influence of partial or total replacementof molybdenum by tungsten on the corrosion resistance of AISI 316 in seawater", 6th International Conference (34th annual) on "Corrosion Mitigation andSurface Protection Technologies", 11-14 December (2017), Sharm El-Sheikh -

32 | P a g e

Egypt.180. Saeed Ghali, Mamdouh Eissa, Michael Mishreky, "Some Features of the

Influence of Titanium and Nitrogen Addition to NiCrMoV Steel", Journal ofMinerals and Materials Characterization and Engineering, (2018), 6, 203-217.http://www.scirp.org/journal/jmmce

181. S.Ghali, and M.Eissa, "Influence of different parameters on compressionstrength of foam steel produced by slip reaction foam sintering",Ironmaking and Steelmaking , Volume 45, Issue 1, (2018), Pages 90-97.https://doi.org/10.1080/03019233.2016.1242929

182. M.Ghayad, M.Eissa, S.Nabil, M.K.Abd-Rabouh, Azza M.Ahmed, S.Mamdouhand N.Nassif; "Effect of Substitution of Molybdenum by Tungstenon the Corrosion Resistance of AISI 316 Stainless Steel in SeaWater", International Conference on Materials Science and Engineering:Recent Advances and Challenges, ICMSE-RAC 2018, March I 1-13th, (2018),Alexandria, New Borg El-Arab City, E-JUST, Egypt.

183. Mohammed Ali, David Porter, Jukka Kami, Mamdouh Eissa, Hoda ElFaramawy, M.F.El-Shahat and Taha Mattar, "Effect of Electroslag Refining onCleanness, Microstructure and Mechanical Properties of a NewlyDeveloped CrNiMoWMnV Ultrahigh-Strength Steel", InternationalConference on Materials Science and Engineering: Recent Advances andChallenges, ICMSE-RAC 2018, March I 1-13th, (2018), Alexandria, New BorgEl-Arab City, E-JUST, Egypt.

184. Mamdouh Eissa, Taha Mattar, Ahmed Hamed, Abdelhakim Kandil,Omnia Ali, ''Development high strength-high toughness low carbon steelusing combined V-Ti-micro-alloying and different thermos-mechanicaltreatments", International Conference on Materials Science and Engineering:Recent Advances and Challenges, ICMSE-RAC 2018, March I 1-13th, (2018),Alexandria, New Borg El-Arab City, E-JUST, Egypt.

185. Aly Saeed, M.M.Eissa, S.U.El-Kameesy, "Microstructure, Hardness andAttenuation Properties of Devolved Stainless Steel Alloys for In-Core ofNuclear Reactor", International Conference on Materials Science andEngineering: Recent Advances and Challenges, ICMSE-RAC 2018, March I 1-13th, (2018), Alexandria, New Borg El-Arab City, E-JUST, Egypt.

186. M.M.Eissa, F.M.El-Hossary, S.U.El-Kamessy, Aly Saeed, Al-Zahraa A. AbdElmula, Samah A.Al-Shelkamy, "Mechanical and gamma ray attenuationproperties of N316L steel treated by rf plasma as a nuclear material",Accepted for publication in "The Arab Journal of Nuclear Sciences andApplications", 2018.

187. Shaimaa Hafez, M.M. Eissa, S.U. El-Kameesy, R.M. Elshazly, M.K. El Fawkhry,and Aly Saeed, “MODIFIED BORON-TITANIUM AUSTENITIC STAINLESS-STEEL ALLOYS FOR POWER REACTORS.” International Journal ofEngineering Technologies and Management Research, 5 (6), (2018). 87-95.DOI:10.5281/zenodo.1313100.

188. Mohammed Ali, David Porter. Jukka Komi. Mamdouh Eissa. Hoda ElFaramawy and Tahaa Mattar, ''The Effect of Electroslag Refining onUltrahigh-Strength Steels, Part Ӏ - Cleanness'', Submitted for publication in

33 | P a g e

Journal of Materials Engineering and Performance, (2018).189. Mohammed Ali, David Porter. Jukka Komi, Mamdouh Eissa. Hoda El

Faramawy and Tahaa Mattar, ''The Effect of Electroslag Refining onUltrahigh-Strength Steels, Part II - Microstructure and MechanicalProperties'', Submitted for publication in Journal of Materials Engineering andPerformance, (2018).

190. Raafat Farahat, Mamdouh Eissa, Mohamed S. El-Deab, G.M.Megahed, SohaA. Abdel – Gawad, Ayman Fathy, ''Effect of EAF slag temperature andcomposition on its electrical conductivity'', Submitted for publication in theISIJ International, (2018).

191. S. U. El-Kameesy, F. M. El-Hossary, M. M. Eissa, A. A. Abd El-Moula, Samah A.Al-Shelkamy and Aly Saeed, ''Radiation shielding, mechanical andtribological properties of treated AISI304L using H2/N2 rf plasma'',Accepted for the “First International Conference on Particles, Materials andEnergy: Advanced Medical and Industrial Applications (FICPME- 2018)”,December 2-6, (2018), Luxor.

192. Mamdouh Eissa, Hoda El-Faramawy, Azza Ahmed, Saeed Ghali, MamdouhElewa , Taha Mattar, ''Conversion of mill scale waste into high purity pigiron suitable for ductile cast iron production'', Accepted for 8th InternationalCongress on Science and Technology of Ironmaking - ICSTI 2018" September25-28, (2018), Schloss Schönbrunn/Vienna

P. Other Activities

a) Participation in Committees Promotion Committee - Central Metallurgical Research and DevelopmentInstitute Promotion Committee - Engineering Faculties-Metallurgy Ferrous Standardization Committee, Egyptian Organization ForStandardization & Quality (EOS) Egyptian Iron and Steel Company Development Committee

b) Others

Teaching a course entitled "Iron & Steelmaking and Ferroalloys" for the students of AppliedChemistry Department, Faculty of Science, Ain Shams University, 2003- 2009

Date post:	20-Mar-2020
Category:	Documents
Upload:	others
View:	13 times
Download:	0 times

Curriculum Vitae Prof.Mamdouh Mahmoud Ahmed Eissa Eissa.pdf · Production of silicomanganese alloy...

Documents