1 CURRICULUM VITEA Name : Sr. Dr. Sarajul Fikri Mohamed Date of Birth : 5 th November 1977 Nationality : Malaysian Marital Status : Married Corresponding : Department of Quantity Surveying Address Faculty of Built Environment Universiti Teknologi Malaysia 81310 UTM Skudai Johor Tel: +607 5537363 (O) Fax: +607 5566155 E-mail: [email protected]Website: www.fab.utm.my/sarajul ACADEMIC QUALIFICATION Dec 2003 – Dec. 2006 : Ph.D. in Construction Management Loughborough University United Kingdom Oct. 2001 – Oct. 2002 : M.Sc. in Construction Innovation & Management Loughborough University United Kingdom Apr. 1995 – Apr 2000 : Bach. in Quantity Surveying University Teknologi Malaysia AWARDS AND HONORS RECEIVED April 2013 : i) Services Quality Award, Recognition 2012 Universiti Teknologi Malaysia October 2013 : ii) Bio Innovation Award, Silver Medal by Malaysian Biotechnology Corporation. October 2013 : iii) INATEX 2013, Silver Medal of Sustainable Bio Cement organized UTM.
Transcript
1
CURRICULUM VITEA
Name : Sr. Dr. Sarajul Fikri Mohamed
Date of Birth : 5th November 1977
Nationality : Malaysian
Marital Status : Married
Corresponding : Department of Quantity Surveying Address Faculty of Built Environment Universiti Teknologi Malaysia 81310 UTM Skudai Johor Tel: +607 5537363 (O) Fax: +607 5566155 E-mail: [email protected] Website: www.fab.utm.my/sarajul ACADEMIC QUALIFICATION Dec 2003 – Dec. 2006 : Ph.D. in Construction Management Loughborough University United Kingdom Oct. 2001 – Oct. 2002 : M.Sc. in Construction Innovation & Management Loughborough University United Kingdom Apr. 1995 – Apr 2000 : Bach. in Quantity Surveying University Teknologi Malaysia AWARDS AND HONORS RECEIVED
April 2013 : i) Services Quality Award, Recognition 2012 Universiti Teknologi Malaysia October 2013 : ii) Bio Innovation Award, Silver Medal by Malaysian Biotechnology Corporation. October 2013 : iii) INATEX 2013, Silver Medal of Sustainable Bio Cement organized UTM.
2
November 2012 : iv) Best Research Group Grant Procurement Construction Research Alliance UTM. April 2009 : v) Services Quality Award, Recognition 2009
(Study Leave Category), Universiti Teknologi Malaysia October 2001 : vi) Lawrence Chine Memorial Award The Institution of Surveyors Malaysia (ISM)
PROFESSIONAL EXPERIENCE
Nov. 2008 – Date : Senior Lecturer, Department of Quantity Surveying, Universiti Teknologi Malaysia.
Nov. 2000 – Dec 2006 : Lecturer, Department of Quantity Surveying, Universiti
Teknologi Malaysia.
Apr. 2000 – Oct. 2000 : Quantity Surveyor, Baharuddin Ali and Low Sdn Bhd,
Quantity Surveyor and Project Management Consultant,
Kuala Lumpur, Malaysia
JOURNAL AND BOOK EDITOR/EDITORIAL
i) Chief Editor Non Indexed Journal, Proceedings Journal of 15th Annual Symposium
Chinese Research Institute of Construction Management: Advancement of Construction Management and Real Estate, 6-8 August 2010, Johor Bahru, Malaysia. (ISBN No. 978 9670104 003).
ii) Editor Research Book Chapter, Emerging Issues on Sustainable Urban Development, (2012) Johor Bahru, UTM Press. (Approved by Editor / Final Draft).
ADMINISTRATIVE EXPERIENCE 01.06.2015 – now : Head of Department, Department of Quantity Surveying
Faculty of Built Environment, Universiti Teknologi Malaysia. 01.06.2015 – now : Head of Construction Economics & Management Research Group
Faculty of Built Environment, Universiti Teknologi Malaysia. 1.11.2012 – 31.05.2015 : Academic Co-ordinator, Department of Quantity Surveying
Faculty of Built Environment, Universiti Teknologi Malaysia.
3
1.06.2011 – 31.10.2012 : Program Leader, Department of Quantity Surveying Faculty of Built Environment, Universiti Teknologi Malaysia. 1.03.2009 – 28.02.2011 : Head, Finance & Administrative, Iskandar Malaysia-UTM Research Centre (IMREC) PROFESSIONAL MEMBERSHIP AND RECOGNITION
i) Member, Board of Quantity Surveyors Malaysia (Reg No: 2013/MF01554) ii) Member, The Royal Institution of Surveyors Malaysia (Membership No: G9875) iii) Member, The Royal Institution of Chartered Surveyors (RICS) UK iv) Member, The Institute of Value Management Malaysia (IVMM) v) Member, The Chinese Institute of China Research Institute of Construction Management
(CRIOCM) TEACHING EXPERIENCES
Bachelor Degree 1. SBQ1223 Construction Technology I 2. SBQ2314 Construction Measurement I 3. SBQ2324 Construction Measurement II 4. SBQ3314 Construction Measurement III 5. SBQ4324 Information Management 6. SBC3353 Site Management 7. SBQ3514 Legal Studies II 8. SBQ4213 Project Documentation 9. SBEQ4712 Research Methodology 10. SBEQ2322 Cost Planning & Control 11. SBEQ3213 Mechanical & Electrical Works Measurement
RESEARCH PROJECT UNDERTAKEN 01/04/2014 : Project Leader, Whole Life Costing (WLC) For Building Services
Works As Contribution To Sustainable Construction In Malaysia. RM40,000.00 (Vot. No. 07H34).
01/12/2014 : Project Leader, Framework For Assessing Whole Life Costing
(WLC) of Solar Energy Technologies In Public Buildings. RM89,000.00 (Vot. No 4F642).
01/04/2014 : Project Member, An Integrated Framework For Massive Open
Online Courses (MOOCs) In UTM. RM20,000.00 (Vot 4J142). 01/04/2014 : Project Member, Exploring the Risk Management Model for
Tender Evaluation of JKR projects. RM20,400.00 (Vot 09J96). 01/07/2014 : Project Member, Kompetensi Khusus Berstruktur Bagi
Pengurusan Kos Penyelenggaraan Bangunan Masjid Di Malaysia. RM20,000.00 (Vot 08H92).
01/04/2014 : Project Member, Developing A Framework For Measuring The
Financial Impact of Obsolescence on Office Buildings In Kuala Lumpur City Centre. RM35,000.00 (Vot 07H69).
16/12/2013 : Project Member, Physicochemical Investigation of Mixed AOT-
TWEEN 85 Reverse Micellar System for Amoxicillin Solubilisation. RM116,000.00 (Vot No 4F385).
01/12/2012 : Project Member, The Adequacy of BQ (Bills of Quantities)
Information in the Current Construction Environment. RM34,000.00 (Vot No 06J90).
01/4/2011 : Project Leader, Sustaining Value For Money In Engineering
Services Through A Standard Method Of Measurement. RM141,000.00 (Vot. No. 02H06).
01/04/2011 : Project Member, The Development of The Maintenance Culture
In Public Buildings. RM111,000.00 (Vot No 02H10). 01/04/2011 : Project Member, The Adoption of Green Supply Chain
Management Initiatives Within The Asia Pacific Region. RM130,000.00 (Vot No 02H41).
5
FUNDAMENTAL RESEARCH GRANT SCHEME (FRGS FUND) 01/12/2014 : Project Leader, Framework For Assessing Whole Life Costing
(WLC) of Solar Energy Technologies In Public Buildings. RM89,000.00 (Vot. No 4F642).
16/12/2013 : Project Member, Physicochemical Investigation of Mixed AOT-
TWEEN 85 Reverse Micellar System for Amoxicillin Solubilisation. RM116,000.00 (Vot No 4F385).
01/04/2011 : Project Member, The Adoption of Green Supply Chain Management Initiatives Within The Asia Pacific Region. RM130,000.00 (Vot No 02H41).
05/01/2011 : Project Leader, A Study on Malaysian Construction Skills Need : Strategies For Sustainable Manpower And Skills. RM48,000.00 (Vot. No. 4F070).
CONTRACT RESEARCH PROJECT AWARDED BY IMREC and GEO SENSE SDN BHD
25/1/2010 : Airsense Project Development: High Resolution Aerial Images of
Iskandar Malaysia. Budget approved RM452, 500 (Vot 69379
UTM.03/11.13 4, Jld 15).
CONTRACT RESEARCH PROJECT AWARDED BY IMREC and MOHE
1/2/2010 : Project Member, Urban Planning Problems and Solutions’ at Parlimen Pasir Gudang. Budget approved RM 38,500 (Vot 69739).
1/2/2010 : Project Member, Improving Public Transport Services in Pasir Gudang. Budget approved RM70,000 (Vot 69739).
PATENT FILED/DISCLOSURE
i) Sarajul Fikri Mohamed - Teaching Material ME Works (UTM.J.14.01/27.13/1JLD57(70)) ii) Sarajul Fikri Mohamed - Copyright Agrement ICC (UTMJ01.12/27.13/1/JLD26(85)) iii) Sarajul Fikri Mohamed - Site KM System (PC/2011/00774)
6
PRODUCT COMMERCIALIZATION
i) Sarajul Fikri Mohamed - Sustainable Biocement (Gross Sale, RM 40,000). ii) Sarajul Fikri Mohamed - MEQS : Mechanical and Electrical Works Cost Estimating and
Cost Control Tools (Gross Sale, RM 20,000). iii) Sarajul Fikri Mohamed - MEQS Invention Disclosure (Gross Sale, RM 20,000). iv) Sarajul Fikri Mohamed - site KM : A Generic KM Tools For Project-Based Organisation
(Spin-off Company, Gross Sale (RM 20,000). POSTGRADUATE SUPERVISION
PhD Student
i) Amuda Yusuf Ganiyu (2011- 2014: Completed)
Framework for Establishing a Standard Method of Measurement for Building Services
Impact of Change Management Capability of Contractors on Cost And Time
Performance of Building Projects n Nigeria.
iii) Noor Azeyah Binti Khiyon (2013-2016 : On going)
Life Cycle Costing Of Mechanical And Electrical Services For Private Finance
Initiatives Projects In Malaysia.
iv) Siti Mazzuana Binti Shamsuddin (2012-2015: On going)
Drivers and Challenges of Industrialised Building System (IBS) in Sustainable
Construction
v) Slyvia Mong (2015-2018 - On going)
Sustainable Performance of Facilities by Local Authority in Malaysia
MSc. Student
i) Shazwani Ahmad Zaki (2011-2013 : Completed)
Enhancing Skills Requirement of The Human Resource for Malaysian Construction
Industry.
7
ii) Suhaila binti Remeli (2011-2013 : Completed)
Intergrating Quantity Surveyor’s Knowledge into Building Services Works in Malaysia.
iii) Suzana C Alih (2010-2014 : Completed)
Level of Awareness of Corporate Social Responsibility (CSR) in Contracting Firms.
iii) M. Rashidul Islam (2016-2018 : On going)
Integrating Sustainable Facilities Management Model at the Early Stage of Building
Design in Malaysia
PUBLICATIONS Journal
International Journal
i) Khiyon, N. A. & Mohamed, S. F. (2015). Life Cycle Costing of Mechanical and Electrical Services for Private Finance Initiatives Projects in Malaysia. International Journal of Tomography & Simulation, Volume 53 (Issue 3).
ii) Arowosegbe, A. A., Mohamed, S. F. (2015). Cost Performance and Change Management Capability Level of Contractors: A Relational Quantitative Study (Accepted), Journal of Advance Science Letters.
iii) Arowosegbe, A. A., Mohamed, S. F. (2015). Towards Change Management Capability Assessment Model for Contractors in Building Projects, Middle East Journal of Scientific Research, 23 (7), 1327 – 1333.
iv) Arowosegbe, A. A., Mohamed, S. F. (2015). A Systematic Change Management
Capability Maturity Assessment framework for Contracting Organizations. American Scientific Research Journal for Engineering, Technology and Sciences 13 (1), 88 – 96.
v) Arowosegbe, A. A., Mohamed, S. F. (2015). Change management Capability Maturity
Framework: A Toolkit for Time Overrun Reduction in Building Projects. Jurnal Teknologi (Under processing).
vi) Arowosegbe, A. A., Mohamed, S. F. (2015). Impact Assessment of Change Management
Capability Maturity Level of Contractors’ on time performance of Building Projects in Nigeria. (Under processing with IICIST 2015).
8
vii) Noor Azeyah Khiyon & Sarajul Fikri Mohamed (2014). Life Cycle Costing of Mechanical and Electrical Services for Private Finance Initiatives Projects in Malaysia. International Journal of Tomography & Statistics, ISSN: 2319-3336
viii) Amuda Yusuf, G and Mohamed, S F (2014) ‘Perceived benefits of adopting standard –
Based pricing mechanism for mechanical and electrical services installations’, Australasian Journal of Construction Economics and Building, 14 (2) 104-110.
ix) Ganiyu, A.Y., Mohamed, S.F., Yusof, Z.M. & Misnan, M.S. (2013). Role of Building
Services Quantity Surveyors in Managing Cost of Green Buildings. Advanced Materials Research. Vol 689 pp 71-74. ISSN 1022-6680 (Indexed in SCOPUS).
x) Ganiyu, A.Y., Mohamed, S.F., Remeli, S. (2013) Factors Inhibiting the Adoption of a
Uniform Pricing Mechanism for Building Services. International Journal of Engineering Business Management. Vol 5 No 3 pp 1-10. ISSN 1847-9790 (Indexed in SCOPUS).
xi) Mohamed, S.F. & Ganiyu, A.Y. (2012) Perceived Benefits of Adopting Standard Based
Pricing Mechanism for Building Services: Lessons From Building Fabrics and Finishes. Archives Des Sciences. Vol. 65, No 9. Sept 2012 pp 339-356. ISSN 1661-464X (IF Journal: 0.474).
xii) Mohamed, S.F., Ganiyu, A.Y., Yusof, Z.M. & Misnan, M.S. (2012). Framework for
Enhancing Cost Management of Building Services. Procedia Social and Behavioral Sciences. Vol 65 pp 704-710. ISSN 1877-0428 (Indexed in SCOPUS).
xiii) Mohamed, S.F. and Anumba, C.J. (2006) The Potential for Improving Site Management
Practices Through Knowledge Management. Construction Innovation. Vol. 6, Issue 4. pp 232-249.
xiv) Zaki, S. A., Mohamed, S. F., & Yusof, Z. M. (2012). Construction Skilled Labour Shortage
: The Challenges in Malaysia Construction Sector. OIDA International Journal of Sustainable Development. Volume 04, No. 05, pp. 99-108. Malaysia: Ontario International Development Agency, Canada. ISSN 1923-6654 (print), ISSN 1923-6662 (online).
xv) Ganiyu, A.Y. & Mohamed, S.F. (2012) Identification of the Potentials and Barriers of
Adopting Standard Method of Measurement for Mechanical and Electrical Services in Malaysia, OIDA International Journal of Sustainable Development. Vol. 3, No. 1, pp. 47-56. Malaysia: Ontario International Development Agency, Canada. ISSN 1923-6654 (print), ISSN 1923-6662 (online).
in Malaysia from Multiple Economic Impacts Measures, OIDA International Journal of Sustainable Development. Vol. 4, No.8, pp. 65-70. Malaysia: Ontario International Development Agency. ISSN 1923-6654 (print), ISSN 1923-6662 (online).
9
BOOK CHAPTERS
1. Amuda Yusuf, G. Mohamed, S.F., Yusof, Z,M, Misnan, M.S. (2014): Towards Developing Building Services Standard Method of Measurement in Malaysia in Recent Trends in Social and Behaviour Sciences Gaol,F.L;Kadry,Seifedine;Taylor,Marie and Li P S 77 82 London UK CRC Press:Taylor & Francis Group.
2. Amuda Yusuf, G. Mohamed, S.F., (2014): Standard for Uniformity in Building Engineering Services Price Forecast, in IAENG Transactions on Engineering Sciences Sio - long Ao, Alan Hoi - Shou Chan, Hideki Katagiri & Li Xu 183-192 London,UK CRC Press:Taylor & Francis Group
REFEREED CONFERENCES International Conference Proceedings (Indexed and Non Indexed)
i) Arowosegbe, A. A., Mohamed, S. F. (2015). Developing Change Management Capability Maturity Framework for Assessing and Improving Contracting Organization’s Cost Performance in Building Projects, in Proceedings of 9th Asia Pacific Structural Engineering and Construction Conference and 8th Asean Civil Engineering Conference, 3 – 5 November, 2015, Universiti Teknologi Malaysia. Kuala Lumpur (UTMKL), Malaysia.
ii) Arowosegbe, A. A., Mohamed, S. F. (2015). Developing Change Management Capability Maturity Framework for Assessing and Improving Contracting Organization’s Time Performance in Building Projects in Proceedings of International Joint-Conference SENVAR- iNTA - AVAN 2015 24th – 26th November, 2015 Universiti Teknologi Malaysia. Johor Bahru, Malaysia.
iii) Arowosegbe, A. A., Mohamed, S. F. (2015). Understanding and Improving Change Management Capability: Assessment Model for Contractors in Building Projects, in Proceedings of 3rd International Science Postgraduate Conference, 24th – 26th February 2015 Universiti Teknologi Malaysia. Johor Bahru, Malaysia.
iv) Arowosegbe, A. A., Mohamed, S. F. (2015). Impact Assessment of Change Management Capability Maturity Level of Contractors’ on Time Performance of Building Projects in Nigeria, in proceedings of 1st ICRIL- International Conference on Innovation in Science and Technology, 20th April, 2015, Kuala Lumpur Malaysia.
v) Noor Azeyah Khiyon & Sarajul Fikri Mohamed (2014). Towards a Framework of LCC of M&E services for PFI projects in Malaysia. Proceedings, 5th International Graduate Conference on Engineering, Science and Humanity (IGCESH2014), Johor, Malaysia, 19-21 August 2014. pp 448-449
vi) Arowosegbe Ajayi & Sarajul Fikri Mohamed (2014). Cost Performance and Change Management Capability Level of Contractors. A Relational Quantitative Study
10
Proceedings, International Conference on Business, Management, Tourism and Hospitality (BIZMATOUR2015), Melaka, Malaysia, 12-14 May 2015.
vii) Noor Azeyah Khiyon & Sarajul Fikri Mohamed (2014). Towards a Framework of LCC of M&E Services for PFI Projects in Malaysia. Proceedings, 5th International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), Johor, Malaysia, 19-21 August 2014. pp 448-449.
viii) Amuda Yusuf, G. Mohamed, S.F. (2014). An Investigation into the desired Attributes of Building Services Standard Method of Measurement in Malaysia, Proceedings of CIB 107, Lagos Nigeria.
ix) Sarajul Fikri Bin Mohamed (2014), An Investigation Into The Desired Attributes Of
Building Services Standard Method Of Measurement In Malaysia, CIB W107: Construction In Developing Countries And Its Contribution To Sustainable Development.
x) Sarajul Fikri Bin Mohamed (2014), Towards A Framework Of Life Cycle Costing of M&E
Services For PFI Projects In Malaysia, 5th International Graduate Conference On Engineering, Science And Humanity (IGCESH,2014).
xi) Amuda Yusuf, G. Mohamed, S.F. Ibrahim A.D and Olowa, T.O.O (2013): The Challenges of Developing BiM – Based Measurement Standard in Malaysia, The Nigerian Institute of Quantity Surveyors, ISBN: 978-934-446 – 8
xii) Amuda Yusuf, G. Mohamed, S.F., Yusof, Z,M, Misnan, M.S (2013) Practitioners opinion on current practices in building services contract price forecasting in Malaysia, SHUSER 2013- (IEEE/Scopus)
xiii) Amuda, Y.G., Mohamed, S.F., Yusof, Z.M. & Misnan M.S. (2013) Adoption of Standard Based Pricing Method for the Procurement of Mechanical and Electrical Engineering Services in Malaysia. Proceedings, World Congress on Engineering (WCE 2013), London, U.K. ISBN No: 978-988-19251-0-7) (Indexed in SCOPUS).
xiv) Sarajul Fikri Mohamed, Mohd Saidin Misnan, Zakaria Mohd Yusof, and Norazam
Othman (2012). Mosque Buildings Maintenance Costs In Malaysia, Proceedings of the 3rd International Conference on Construction Industry (ICCI 2012), Padang, Sumatera Barat, Indonesia, 10-11 April 2012. pp 162-169. ISSN 2252-7729.
xv) Sarajul Fikri Mohamed, Mohd Saidin Misnan, Zakaria Mohd Yusof, Syamsul Hendra
Mahmud & Suhaila Remeli (2012). Towards A Framework To Integrate Quantity Surveyors’ Knowledge Into Building Services Works, Proceedings of the 3rd International Conference on Construction Industry (ICCI 2012), Padang, Sumatera Barat, Indonesia, 10-11 April 2012. p.p 211-219. ISSN 2252-7729.
11
xvi) Mohd Saidin Misnan, Sarajul Fikri Mohamed, Zakaria Mohd Yusof, and Norazam Othman (2012). Government Staffs Readiness On The Implementing Of The Government Asset Management Policy. Proceedings of the 3rd International Conference on Construction Industry (ICCI 2012), Padang, Sumatera Barat, Indonesia, 10-11 April 2012. pp 125-138. ISSN 2252-7729.
xvii) Mohd Saidin Misnan, Sarajul Fikri Mohamed, Zakaria Mohd Yusof, and Norazam
Othman (2012). Safety Cost in Construction Project. Proceedings of The 3rd International Conference on Construction Industry (ICCI 2012), Padang, Sumatera Barat, Indonesia, 10-11 April 2012. pp 226-241. ISSN 2252-7729.
xviii) Zakaria Mohd Yusof, Mohd Saidin Misnan, Sarajul Fikri Mohamed, and Norazam
Othman (2012). Human Resources Management in Malaysian Construction Industry, Proceedings of the 3rd International Conference on Construction Industry (ICCI 2012), Padang, Sumatera Barat, Indonesia, 10-11 April 2012. pp 179-184. . ISSN 2252-7729.
xix) Norazam Othman Mohd Saidin Misnan, Sarajul Fikri Mohamed, and Zakaria Mohd
Yusof (2012). Implementing And Legislating Green Building Criterias (GBI) In Malaysia’s Construction Industry, Proceedings of the 3rd International Conference on Construction Industry (ICCI 2012), Padang, Sumatera Barat, Indonesia, 10-11 April 2012. pp 377-384. ISSN 2252-7729.
xx) Zaki, S.A., Mohamed, S.F. and Yusof, Z.M. (2012) Attracting and Retaining Skilled
Construction Workforce in Malaysian Construction Firms. Proceedings, World Academy of Science, Engineering and Technology (WASET), Kuala Lumpur Malaysia. p.p 1691-1697. ISSN No. 2010.376X (SCOPUS).
xxi) Amuda, Y.G., Mohamed, S.F. and Yusof, Z.M. (2012) Examination of Pre-Tender
Budgeting Techniques For Mechanical and Electrical Services in Malaysia. Proceedings, World Academy of Science, Engineering and Technology (WASET), Kuala Lumpur Malaysia. p.p 1290-1298. ISSN No. 2010.376X (SCOPUS).
xxii) Amuda-Yusuf, G. Mohamed, S.F. (2012), Appraisal of the Current Method Of Measuring Mechanical and Electrical Services in Malaysia, Proceedings of Quantity Surveying International Convention & Malam Anugerah LJBM,25 -26 September 2012,Renaissance Hotel, Kuala Lumpur, Malaysia (Professional conference).
xxiii) Mohamed, S.F., Yusof, Z.M., Misnan, M.S. & Anumba C.J. (2011) Towards A
Framework For Developing Knowledge Management Tool For Project Based Orgnanisation. Proceedings, CIBW107 Innovation and Sustainable Construction in Developing Countries,Hanoi, Vietnam 01st-03rd November. p.p. 307-312. ISBN 978-979-98278-3-8. 1156-2011/CXB/01-119/XBXD.
xxiv) Yusof, Z.M., Mohamed, S.F., Misnan, M.S. & Fatt, C.Y. (2011) Enhancing The Usage of
Malaysian Standard Method of Measurement for Civil Engineering Works, Proceedings, CIBW107 Innovation and Sustainable Construction in Developing Countries,Hanoi,
12
Vietnam 01st-03rd November. p.p. 313-318 ISBN 978-979-98278-3-8. 1156-2011/CXB/01-119/XBXD.
Occupational Health And Safety (OHS) Culture Model In Construction Industry. Proceeding The 4th Environmental Technology and Management Conference: “Present and Future Challenges in Environmental Sustainability”, Indonesia, 2011. (ETMC 2011), ITB, Bandung, Indonesia, 3-4 Nov. 2011. ISBN 978-979-98278-3-8. pp-1723-1743.
xxvi) Mohamed, S.F., Yusof, Yusof, Z.M. & Zaki, S.A (2011) Construction Skilled Labour
Shortage – The Challenges in Malaysian Construction Sector,, Proceedings, International Conference on Sustainable Development, Putrajaya Malaysia, 05th – 07th December.
xxvii) Mohamed, S.F. & Ganiyu, A.Y. (2011) Identification of the Potentials and Barriers of
Adopting Standard Method of Measurement for Mechanical and Electrical Services in Malaysia, Proceedings, International Conference on Sustainable Development, Putrajaya Malaysia, 05th – 07th December.
xxviii) Mohamed, S.F. & Rais, N.F(2011) The Potential of Implementing Rain Water
Harvesting From Multiple Economic Impact, Proceedings, International Conference on Sustainable Development, Putrajaya Malaysia, 05th – 07th December.
xxix) Misnan, M.S., Mohamed, S.F. Yusof, Z.M. & Othman, N. (2011) Government Staffs
Readiness on Implementing The Government Asset Maintenance Policy. Proceedings, International Conference on Facilities Management, Procurement Systens and Public Private Partnership. 22-25 Jauary 2012, UNITEN Bangi, Malaysia.
xxx) Misnan, M.S., Mohamed, S.F. Yusof, Z.M. & Othman, N. (2011). Government Staffs
Readiness On Implementing The Government Asset Maintenance Management Policy.Proceeding The CIBW070, W92, TG72, International Conference on Facilities Management, Procurement Systems and Public Prtivate Partnership: Cape Town, 22-25 Jan. 2012.
xxxi) Mohamed, S.F., Yusof, Z.M. & Misnan, M.S. (2010) Innovative Tool For Construction Site
Management Practices , Proceedings, 15th Annual Symposium Chinese Research Institute of Construction Management (CRIOCM), Johor Bahru, Malaysia 07th-08 August.
xxxii) Misnan, M.S., Mohamed, S.F., Yusof, Z.M. & Bakri A. (2010) Improving Construction
Industry Safety Standard Through Audit: SHASSIC Assessment Tools For Safety Proceedings, 15th Annual Symposium Chinese Research Institute of Construction Management (CRIOCM), Johor Bahru, Malaysia 07th-08 August.
xxxiii) Mohamed, S.F. and Anumba, C.J. (2006) The Need for An Effective Knowledge
Management Framework for Construction Site Management, Proceedings, 6th International Postgraduate Research Conference, TU-Delft, The Netherlands 6th-7th April, p.p.720-729.
13
xxxiv) Mohamed, S.F. and Anumba, C.J. (2005) Opportunities for Improving Site Management Practices Through Knowledge Management, Proceedings, CIB W102 Meeting and International Conference on Information and Knowledge Management in a Global Economy, 19th –20th May, Instituto Superior Technico, Lisbon, p.p. 465-474.
xxxv) Mohamed, S.F. and Anumba, C.J. (2005) Towards a Framework for Integrating
Knowledge Management Processes into Site Management Practices, Proceedings, 20th ARCOM Annual Conference. Heriot-Watt University, 1-3rd September. p.p. 45-54.
xxxvi) Mohamed, S.F. and Zaibon, S.B. (2004) Artificial Intelligence Support For Knowledge
Management in Construction. Proceedings, Knowledge Management International Conference and Exhibition (KMICE 2004), Faculty of Information Technology, Universiti Utara Malaysia. p.p. 395-403.
Construction: The Challenges And Implementation Strategies In Malaysian Construction Industry. Proceedings, National Conference on Information and Communication Technology, Kulliyah of Information and Communication Technology, International Islamic University Malaysia, 21st -22nd October.
xxxviii) Mohamed, S.F., Yusof, Z.M. and Mahmood, W.Y. (2003) Knowledge Management For
Construction Industry: The Challenges, Barriers And Implementation Strategies. Proceedings, 2nd General Meeting and Conference of Management in Construction Researchers Association, University Technology of MARA, Malaysia 8th-10th October.
xxxix) Yusof, Z.M. and Mohamed, S.F. (2003) The Impact of Information Technology
Development – The Challenges and Implementation Strategies In Quantity Surveying Profession In Malaysia.Proceedings, Geoinformation and Surveying Conference, Crown Plaza, Kuching, Sarawak, Malaysia, 9th-10th April.
TEACHING PUBLICATION
i) Sarajul Fikri Mohamed (Project Leader) Teaching Module - Project Estimating And Cost Control For Engineers. National Level for The Institution of Engineers (IEM) Malaysia. 10-11 December 2014.
Sarajul Fikri Mohamed (Project Member), Teaching Module - Site Management For Engineers. Sponsored from UTSB and CIDB (Vot 246).
ii) Sarajul Fikri Mohamed (Project Member),Teaching Module - Site Planning, Controlling
and Monitoring. Sponsored from UTSB and CIDB (Vot 246). iii) Sarajul Fikri Mohamed (Project Member),Teaching Module - Project Management in
Construction. Sponsored from UTSB and CIDB (Vot 246). iv) Sarajul Fikri Mohamed (Project Member),Teaching Module - Site Waste Managament.
Sponsored from UTSB and CIDB (Vot 246).
14
v) Sarajul Fikri Mohamed (Project Member),Teaching Module - Cost Estimating For Earth
Works & Drainage Works. Sponsored from Kementerian Kerjaraya Malaysia/Pusat Khidmat Kontraktor(Vot 246).
vi) Sarajul Fikri Mohamed (Project Member),Teaching Module - Project Estimating For
Road Works and Road Furnitures. Sponsored from Kementerian Kerjaraya Malaysia/Pusat Khidmat Kontraktor(Vot 246).
CONSULTANCY WORKS
i) Team Member, Seminar Pengurusan Bangunan Berstrata Kepada Badan Pengurusan (JMB/MC) for Majlis Perbandaran Kota Bharu (MPKB).State Level. 4-5 June 2014.
ii) Team Member, Kursus Asas Kontraktor Binaan Bangunan for State Government of Sarawak. State Level. 10-14 March 2014.
iii) Team Member, Kursus Pembinaan Jeti Dan Jambatan Dan Penyediaan Sebut Harga for State Government of Sarawak.. Statee Level. 11 November-13 December 2014.
iv) Team Leader, Appointment As Subject Matter Expert (SME) For I-Lecture Video Development for Open University Malaysia (OUM). National Level. 16 June -29 August 2014.
v) Team Leader, Seminar on Project Estimating And Cost Control For Engineers. National level for The Institution of Engineers (IEM) Malaysia. 10-11 December 2014.
vi) Team Leader, Project Estimation And Cost Advice For MNA Engineering Sdn Bhd. University Level 1 June - 22 August 2014.
vii) Team Leader, Kursus Peranggaran Kos Dan Penyediaan Tender. University level. 20-21 October 2014.
viii) Team Member, Course on Project Cost Management For Engineers. National level. 26-27 December 2013.
ix) Team Member, Kursus Asas Kontraktor Binaan. State level. 16-20 December 2013.
x) Team Leader, Seminar on Construction Measurement Techniques For Engineers. National level for The Institution of Engineers (IEM) Malaysia 25-26 July 2013.
xi) Team Member, Professional Diploma in Construction. National level. 14-23 April 2013.
xii) Team Member, Pembangunan Dokumen MQA untuk Program Diploma Eksekutif Pembinaan UTM SPACE. University level, 22-23 July 2013.
xiii) Team Member, Project Accounting and Cost Control. State level. 9-10 July 2012.
15
xiv) Construction Measurement Techniques For Engineers. 25-26 July 2012. The Institution Of Engineers Malaysia, RM6,000 Vot 246.
xv) Project Estimating and Cost Control For Young Engineers. 21-22 November 2012. The Institution Of Engineers Malaysia, RM6,000 Vot 246.
xvi) Project Estimating and Cost Control For Engineers. 29-30 June 2012. The Institution Of Engineers Malaysia, RM6,000 Vot 246.
xvii) Facilitator for Green Technology and Building Maintenance Workshop for JKR Negeri Sembilan.. 17 December 2012. JKR Negeri Sembilan.
xviii) Kursus Pemantuan, Pengurusan dan Pengawalan Tapak Bina. 12-13 April 2010. UTSB, Penaja: Lembaga Pembangunan Industri Pembinaan (CIDB) Malaysia, RM8,000.00 Vot 246.
xix) Program Peningkatan Kualiti Kontraktor Negeri Terengganu: Kursus Jalan dan Perabot Jalan, 21-23 Julai 2009. SPACE, Penaja: Pusat Khidmat Kontraktor (PKK) Terengganu, RM12,000.00. Vot 246.
xx) Program Peningkatan Kualiti Kontraktor Negeri Terengganu: Kursus Pembinaan Jeti dan Jambatan, 11-13 Ogos 2009, SPACE, Penaja: Pusat Khidmat Kontraktor (PKK) Terengganu,, RM12,000.00. Vot 246.
xxi) Program Peningkatan Kualiti Kontraktor Negeri Sarawak: Kursus Pembinaan Jeti dan Jambatan, 20-22 Mei 2009, UTSB, Penaja: Setiausaha Kewangan Negeri Sarawak, RM12,000.00. Vot 246.
xxii) Program Peningkatan Kualiti Kontraktor Negeri Terengganu: Kursus Jalan dan Perabot Jalan, 13-15 Oktober 2009. SPACE, Penaja: Pusat Khidmat Kontraktor (PKK) Terengganu, RM12,000.00. Vot 246
xxiii) Program Peningkatan Kualiti Kontraktor Negeri Terengganu: Kursus Pembinaan Jeti dan Jambatan, 17-19 Oktober 2009, SPACE, Penaja: Pusat Khidmat Kontraktor (PKK) Terengganu,, RM12,000.00. Vot 246.
PROFESSIONAL SERVICES
i) Examiner for QS Intermediate Examination. Financial Management.Royal Institution of Surveyors Malaysia (RISM). 19 March – 19 July 2015.
ii) Invited Lecturer at Fakultas Teknik Sipil Dan Perencanaan, Universitas Bung Hatta Padang West Sumatera Indonesia. International Level. 03-06 March 2015.
iii) Deputy Chairman for PhD Examination of Quantity Surveying, Faculty Level. 13 February 2014
ii) Internal Examiner Master Thesis In Quantity Surveying (Research), Faculty Level. 15 Mei- 16 June 2014.
16
iii) Academic Facilitator, Department of Quantity Surveying, FAB UTM. University Level. 19 October - 31 December 2014
iv) Invited Speakers at Fakultas Teknik Sipil Dan Perencanaan, Universitas Bung Hatta Padang West Sumatera Indonesia. International Level. 23-25 April 2014.
v) Reviewer For Journal Paper Entitled A Framework For Promoting Sustainable Construction In Malaysia for Journal of Construction in Developing Countries. International Level. 15 June-15 July 2014.
vi) Facilitator, Course on Project Estimating & Cost Control For Engineers. International Level. 10-11 December 2014.
vii) Examiner Panel, The Institution of Surveyors Malaysia. International Level. 7 August- 30 September 2014.
vii) Reviewer For Journal Paper Entitled Knowledge Management Practices In Quantity Surveying Practices In Lagis And Abuja Nigeria. International Level. 1 April - 21 Mei 2014.
viii) Subject Matter Expert (SME), Perintis Pembangun Projek Massive Open Online Course (MOOCs) UTM. University Level. 30 December 2014.
ix) Committee for Information Technology Panel, Department of Quantity Surveying. Faculty Level. 1 January- 31 December 2013.
x) Committee for Undergraduate Research Project. Faculty Level. 1 January-31 December 2013.
xi) Examiner Panel for Intermediate Competency Test, The Institution Of Surveyors Malaysia. National Level. 17-31 July 2014.
xii) Examiner Panel for Intermediate Competency Test, The Institution Of Surveyors Malaysia.National Level. 17 December 2013 - 31 January 2014.
xiii) Member Equilavency Committe, Department of Quantity Surveying. Faculty Level. 1 January-31 December 2013.
xiv) Invited Lecturer to Universitas Bung Hatta Padang West Sumatera Indonesia. MoU Activity Between UTM-UBH. International Level. 4 November 2013.
vi) Facilitator for Kursus Pembangunan Kontraktor Binaan Negeri Sarawak. State Level. 16-20 Disember 2013.
xxii) Examination Panel, The Institution of Surveyors Malaysia (ISM). National Level. 2 January - 29 February 2012.
xxiii) Examination Panel, The Institution of Surveyors Malaysia (ISM). National Level. 20 November - 31 December 2012.
17
xxv) Committee Members, FAB Marketing Unit. Faculty Level. 2 January- 27 September 2012.
xxvi) Committee Members , Penggubal Peperiksaan Khas Juruteknik Ke Penolong Jurutera J29. University Level. 16 October - 20 December 2012.
xxvii) Programme Leader, Department of Quantity Surveying. Faculty Level. 1 June-30 December 2011.
xxviii) Committee Members, 3rd International Conference in Construction Industry Organized by Universitas Bung Hatta in Collaboration with UTM. International Level. 25 October-12 April 2011.
xxx) Committee Members, FAB Facilities Team. Faculty Level. 1 June- 31 Mei 2011.
xxxv) Chairman, 15th International CRIOCM Symposium on 'Construction Management and Real Estate'. International level. 1January- 8 August 2010.
xxxvi) Head of Finance and Administration. Iskandar Malaysia-UTM IMREC. University level. 1 January-31 December 2012.
xxxvii) Reviewer Journal of Techno Social. International level. 19 January-1 February 2010.
xxxviii) Reviewer, Journal of Techno Social. International level. 20-30 April 2010.
xxxix) Committee Members, The Chinese Research Institute of Construction Management (CRIOCM). International level.7-8 August 2010.
xxxx) Invited Speaker, Program Peningkatan Kualiti Kontraktor Negeri Terangganu. National level. 20-22 November 2010.
18
REFEREES
1. Professor Chimay J Anumba Department Head and Professor of Architectural Engineering The Pennsylvania State University 104 Engineering Unit A University Park, PA 16802, USA. Phone: 814-865-6394 Fax: 814-863-4789 Email: [email protected]
2. Professor Dr Roslan Amirudin Dean Faculty of Built Environment Universiti Teknologi Malaysia 81300 Johor Bahru, Johor, Malaysia
