+ All Categories
Home > Documents > Curved Bridge Instructions · 2020. 9. 18. · Curved Bridge Instructions: Cut Plate into 3...

Curved Bridge Instructions · 2020. 9. 18. · Curved Bridge Instructions: Cut Plate into 3...

Date post: 04-Feb-2021
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
1
Curved Bridge Instructions: Cut Plate into 3 sections with a metal saw as shown below. Install keeping round holes in the middle.
Transcript
  • Curved Bridge Instructions:Cut Plate into 3 sections with a metal saw as shown below.

    Install keeping round holes in the middle.

Recommended