Domestic® PumpSeries B35TM, HB35, HB17, DB and DB-F2’ NPSH CENTRIFUGAL PUMP
CURVESS-649 – S-654C
TABLE OF CONTENTS3500 RPM PUMPS
MODEL DISCHARGE SUCTION* MAX. IMPELLER PAGE(inches) (PF Flange or PVF/HB NPT) (inches)
613PF/PVF-B, HB-35 2 “A” (21/2) 59/16 S650B614PF/PVF-B, HB-35 21/2 “D” (4) 59/16 S650B616PF/PVF-B 11/2 “A” (2) 49/16 S650B617PF/PVF-B 11/2 “A” (2) 59/16 S650B618PF/PVF-B, HB-35 2 “D” (4) 79/16 S651B620PF/PVF-B, HB-35 11/2 “A” (21/2) 79/16 S651B625PF/PVF-B, HB-35 2 “D” (4) 49/16 S651B626PF/PVF-B 2 “A” (21/2) 49/16 S651B618DB/DB-F 21/2 4 79/16 S653B620DB/DB-F 2 3 79/16 S653B628DB/DB-F 3 4 9 S653B
1750 RPM PUMPS
654HB/17 3 6 81/16 S652B658HB/17 3 6 101/16 S652B659HB/17 3 6 101/16 S652B
* Refer to submittal S421 for detailed dimensions on Style PF suction flangesHB-35 and HB-17 Suction connection is a 125# ASA flangeDB and DB-F suction connections are 125# ASA flanges, discharge connections are250# ASA flange (except 628-400# ASA flange)
PERFORMANCE CURVE CHARACTERISTICS
• Impellers are trimmed to the nearest 1/16" increment to supply required capacity. Responsibility for final impeller sizing remains with Xylem Bell & Gossett.
• Maximum Suction Pressure for pumps is 35 psi. Maximum Water Temperature is 250 °F.
• Horsepower curves do not include motor service factor. Typical motor service factors are as follows:
ODP Enclosure – 1.15 Minimum (up to 1.75 are used when available.) TEFC Enclosure – 1.15 Minimum (up to 1.75 are used when available.) Exp. Proof Enc. – 1.0
• NPSH Required is provided for cold (120°F and below) and hot water (above 120°F) applications. NPSH Required is determined by utilizing a vacuum pump to equalize atmospheric pressure and vapor pressure and then mea- suring the required static head of water for non-cavitating pump operation.
• Pumps available from stock are indicated on the respective performance curve by their part number.
• Pumps supplied for 45 GPM or less may include external orificing to facilitate matching of design conditions and to limit maximum motor loads. The orifice extends the pump discharge by 3 1/2". Pumps for 15 GPM or less will be orificed and the orifice will have a 3/4 NPT discharge. Orificing is at the discretion of B&G.
Curve Chart S650C
Series B Group of 2 Ft. N.P.S.H. CENTRIFUGAL PUMP Performance Curves
MODEL 613PF/PVF-BMODEL 613HB-35
3500 RPM2"x21/2"x59/16"
--- COLD––– HOT
140
120
100
80
60
40
20
00 20 40 60 80 100 120 140 160
CAPACITY IN GALLONS PER MINUTE
TO
TAL
HE
AD
IN F
EE
T
59/16"
59/16"
51/4"
5"
43/4"
1 2 3 4 5 FT. NPSH20
4050
6063 EFF.%
5 HP
3 HP
156.2150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
00 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340
CAPACITY IN GALLONS PER MINUTE
TO
TAL
HE
AD
IN F
EE
T
1 2 3 4 5 FT. NPSH
MODEL 614PF/PVF-BMODEL 614HB-35
3500 RPM21/2"x4"x59/16"
--- COLD––– HOT
5"
59/16"
55/16"
43/4"
41/2"41/4"
EFF.%
7.5 HP
30 40
60
55
5 HP
50
59/16"
Available in5 Hp only
PerformanceCharacteristicCurves
Impellers are trimmed tonearest 1/16" dia. Finalselection for impeller sizing remains with the factory.
NPSH shown across top of curve is in ft. of waterhead.
Horsepower curves do notinclude service factor.
Max. suction pressure 35psig.
Max. water temp. 250°F.
PerformanceCharacteristicCurves
Impellers are trimmed tonearest 1/16" dia. Finalselection for impeller sizing remains with the factory.
NPSH shown across top of curve is in ft. of waterhead.
Horsepower curves do notinclude service factor.
Max. suction pressure 35psig.
Max. water temp. 250°F.
Series B Group of 2 Ft. N.P.S.H. CENTRIFUGAL PUMP Performance Curves
MODEL 616PF/PVF-B3500 RPM
11/2"x2"x49/16"
100
90
80
70
60
50
40
30
20
10
0
40
32
24
16
8
00 10 20 30 40 50 60 70 80 90
COLD NPSH REQ.
HOT NPSH REQ.
CAPACITY IN GALLONS PER MINUTE
TO
TAL
HE
AD
IN F
EE
T
DIA49/16
41/4
4
33/4
31/2
31/4
1 1/2HP1HP
3/4HP
1/2HP
30%40%
50%55%
60%65%
69%70%
70%69%
60%
PerformanceCharacteristicCurves
Impellers are trimmed tonearest 1/16" dia. Finalselection for impeller sizing remains with the factory.
NPSH shown across top of curve is in ft. of waterhead.
Horsepower curves do notinclude service factor.
Max. suction pressure 35psig.
Max. water temp. 250°F.
MODEL 617PF/PVF-B3500 RPM
11/2"x2x59/16" --- COLD
––– HOT
140
130
120
110
100
90
80
70
60
50
40
30
20
10
00 10 20 30 40 50 60 70 80
CAPACITY IN GALLONS PER MINUTE
TO
TAL
HE
AD
IN F
EE
T
1 2 3 4 5 FT. NPSH
4550
EFF.%40
20 30
2 HP
11/2 HP
3 HP
1 HP
59/16"
59/16"
51/4"
5"
43/4"
41/2"
41/4"
PerformanceCharacteristicCurves
Impellers are trimmed tonearest 1/16" dia. Finalselection for impeller sizing remains with the factory.
NPSH shown across top of curve is in ft. of waterhead.
Horsepower curves do notinclude service factor.
Max. suction pressure 35psig.
Max. water temp. 250°F.
Series B Group of 2 Ft. N.P.S.H. CENTRIFUGAL PUMP Performance Curves
MODEL 625PF/PVF-BMODEL 625HB-35
(HB-35 5HP ONLY)3500 RPM2"x4x49/16"
--- COLD ––– HOT
140
130
120
110
100
90
80
70
60
50
40
30
20
10
00 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
CAPACITY IN GALLONS PER MINUTE
TO
TAL
HE
AD
IN F
EE
T
1 2 3 4 5 FT. NPSH
55
50 EFF.%
402010 30
41/2 HP
3 HP
49/16"
49/16"
41/4"
4"
3"
33/4"
31/2"
31/4"
PerformanceCharacteristicCurves
Impellers are trimmed tonearest 1/16" dia. Finalselection for impeller sizing remains with the factory.
NPSH shown across top of curve is in ft. of waterhead.
Horsepower curves do notinclude service factor.
Max. suction pressure 35psig.
Max. water temp. 250°F.
MODEL 626PF/PVF-B3500 RPM
2"x21/2"x49/16" --- COLD
––– HOT
130
120
110
100
90
80
70
60
50
40
30
20
10
00 20 40 60 80 100 120 140 160
CAPACITY IN GALLONS PER MINUTE
TO
TAL
HE
AD
IN F
EE
T
1 2 3 4 5 FT. NPSH
49/16"
49/16"
41/4"
4"
3"
33/4"
31/4"
31/2"
23/4" 2 HP
11/2 HP
3 HP
1 HP
6050
EFF.%
4020
55
PerformanceCharacteristicCurves
Impellers are trimmed tonearest 1/16" dia. Finalselection for impeller sizing remains with the factory.
NPSH shown across top of curve is in ft. of waterhead.
Horsepower curves do notinclude service factor.
Max. suction pressure 35psig.
Max. water temp. 250°F.
Curve Chart S652C
Series B Group of 2 Ft. N.P.S.H. CENTRIFUGAL PUMP Performance Curves
MODEL 654HB-171750 RPM
3"x6"x81/16" --- COLD
––– HOT100
90
80
70
60
50
40
30
20
10
00 50 100 150 200 250 300 350 400
CAPACITY IN GALLONS PER MINUTE
TO
TAL
HE
AD
IN F
EE
T
1 2 3 4 5 FT. NPSH
81/16"81/16"
71/2"
7"
5"
61/2"
51/2"
6"
5 HP7 HP
3 HP
3050
EFF.%
4020
55
MODEL 658HB-171750 RPM
3"x6"x101/16" --- COLD
––– HOT
130
120
110
100
90
80
70
60
50
40
30
20
10
00 100 200 300 400 500 600
CAPACITY IN GALLONS PER MINUTE
TO
TAL
HE
AD
IN F
EE
T
1 2 3 4 5 FT. NPSH
10 HP71/2 HP
15 HP
6070
EFF.%
4020
75
7075
101/16"101/16"
91/2"
9"
8"
81/2"
Available in5 Hp only
PerformanceCharacteristicCurves
Impellers are trimmed tonearest 1/16" dia. Finalselection for impeller sizing remains with the factory.
NPSH shown across top of curve is in ft. of waterhead.
Horsepower curves do notinclude service factor.
Max. suction pressure 35psig.
Max. water temp. 250°F.
PerformanceCharacteristicCurves
Impellers are trimmed tonearest 1/16" dia. Finalselection for impeller sizing remains with the factory.
NPSH shown across top of curve is in ft. of waterhead.
Horsepower curves do notinclude service factor.
Max. suction pressure 35psig.
Max. water temp. 250°F.
Series B Group of 2 Ft. N.P.S.H. CENTRIFUGAL PUMP Performance Curves
MODEL 659HB-171750 RPM
3"x6"x101/16" --- COLD
––– HOT
130
120
110
100
90
80
70
60
50
40
30
20
10
00 50 100 150 200 250 300 350 400
CAPACITY IN GALLONS PER MINUTE
TO
TAL
HE
AD
IN F
EE
T
1 2 3 4 5 FT. NPSH
5 HP
71/2 HP
10 HP
65
50
EFF.%
4020
60101/16"101/16"
91/2"
9"
8"
81/2"
71/2"
PerformanceCharacteristicCurves
Impellers are trimmed tonearest 1/16" dia. Finalselection for impeller sizing remains with the factory.
NPSH shown across top of curve is in ft. of waterhead.
Horsepower curves do notinclude service factor.
Max. suction pressure 35psig.
Max. water temp. 250°F.
Curve Chart S653C
MODEL 620DB/DBF3500 RPM
2"x3"x79/16"
550
500
450
400
350
300
250
200
150
100
50
0
30
25
20
15
10
5
0
COLD NPSH REQ.
0 20 40 60 80 100 120 140
CAPACITY IN GALLONS PER MINUTE
TO
TAL
HE
AD
IN F
EE
T
DIA.
HOT NPSH REQ.
30%35%
40%46%
44%46%
42%44%
48%
48%
49%
49%49.5%
20%
10 HP
15 HP
20 HP
30%
35%
40%
42%
7 1/2 HP
79/16"
61/2"
7"
6"
51/2"
5"
Available in5 Hp only
PerformanceCharacteristicCurves
Impellers are trimmed tonearest 1/16" dia. Finalselection for impeller sizing remains with the factory.
NPSH shown across top of curve is in ft. of waterhead.
Horsepower curves do notinclude service factor.
Max. suction pressure 35psig.
Max. water temp. 250°F.
MODEL 618DB/DBF3500 RPM
21/2"x4"x79/16"79/16"
61/2"
51/2"
6"
7"
550
500
450
400
350
300
250
200
150
100
50
0 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280
TO
TAL
HE
AD
IN
FE
ET
0
5
10
15
20
25
30
CAPACITY IN GALLONS PER MINUTE
PerformanceCharacteristicCurves
Impellers are trimmed tonearest 1/16" dia. Finalselection for impeller sizing remains with the factory.
NPSH shown across top of curve is in ft. of waterhead.
Horsepower curves do notinclude service factor.
Max. suction pressure 35psig.
Max. water temp. 250°F.
Series B Group of 2 Ft. N.P.S.H. CENTRIFUGAL PUMP Performance Curves
Xylem Inc. 8200 N. Austin Avenue Morton Grove, Illinois 60053 Phone: (847) 966-3700 Fax: (847) 965-8379www.bellgossett.com
Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. © 2015 Xylem Inc. S-649 – S-654C June 2015
1) The tissue in plants that brings water upward from the roots;2) a leading global water technology company.
We’re a global team unified in a common purpose: creating innovative solutions to meet our world’s water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water efficiently, in their homes, buildings, factories and farms. In more than 150 countries, we have strong, long-standing relationships with customers who know us for our powerful combination of leading product brands and applications expertise, backed by a legacy of innovation.
For more information on how Xylem can help you, go to www.xyleminc.com
Xylem