1 of 8 freespiritfabrics.com makeitcoats.com Curvy Barn Raising Log Cabin Quilt Collection: Peppermint Rose by Verna Mosquera Technique: Strip Piecing Skill Level: Experienced Beginner Crafting Time: Longer Term* Finished Size: Finished Project Size: 72’’ x 72’’ (182.88cm x 182.88cm) Finished Block Size: 12’’ (30.48cm) *Crafting time based on Experienced Beginner skill level Featuring Peppermint Rose by Verna Mosquera Equally impressive for the holidays or for accenting spring décor, this beautiful quilt uses only one block pattern showcased in three poignant fabric combinations. Turn and twist to create this impressive wreath design. Version 1.0
Transcript
1 of 8freespiritfabrics.com makeitcoats.com
Curvy Barn Raising Log Cabin Quilt
Collection: Peppermint Rose by Verna Mosquera
Technique: Strip Piecing
Skill Level: Experienced Beginner
Crafting Time: Longer Term*
Finished Size: Finished Project Size: 72’’ x 72’’ (182.88cm x 182.88cm)Finished Block Size: 12’’ (30.48cm)
*Crafting time based on Experienced Beginner skill level
Featuring Peppermint Rose by Verna Mosquera
Equally impressive for the holidays or for accenting spring décor, this beautiful quilt uses only one block pattern showcased in three poignant fabric combinations. Turn and twist to create this impressive wreath design.
CuttingWOF = Width of Fabric Note: Label the cut fabric pieces with the fabric and piece number for easier assembly.
Fabric A, cut:(60) 11⁄2” x WOF (3.81cm x WOF); sub-cut (36) 121⁄2” x 11⁄2” (31.75cm x 3.81cm) Piece 15 (36) 111⁄2’’ x 11⁄2’’ (29.21cm x 3.81cm) Piece 14 (36) 91⁄2’’ x 11⁄2’’ (24.13 x 3.81cm) Piece 11 (36) 81⁄2’’ x 11⁄2’’ (21.59cm x 3.81cm) Piece 10(36) 61⁄2’’ x 11⁄2’’ (16.51cm x 3.81cm) Piece 7(36) 51⁄2’’ x 11⁄2’’ (13.97cm x 3.81cm) Piece 6(36) 31⁄2’’ x 11⁄2’’ (8.89cm x 3.81cm) Piece 3 (36) 21⁄2’’ x 11⁄2’’ (6.35cm x 3.81cm) Piece 2
Fabrics B, D, and L, cut from each:(5) 21⁄2” x WOF (6.35cm x WOF); sub-cut (12) 81⁄2 x 21⁄2” (21.59cm x 6.35cm) Piece 9(12) 61⁄2’’ x 21⁄2’’ (16.51cm x 6.35cm) Piece 8
Fabrics C, G, and H, cut from each:(7) 21⁄2” x WOF (6.35cm x WOF); sub-cut (12) 111⁄2 x 21⁄2” (29.21cm x 6.35cm) Piece 13 (12) 91⁄2’’ x 21⁄2’’ (24.13cm x 6.35cm) Piece 12
Fabrics E, H, and K, cut from each:(3) 21⁄2” x WOF (6.35cm x WOF); sub-cut(12) 51⁄2 x 21⁄2” (13.97cm x 6.35cm) Piece 5 (12) 31⁄2’’ x 21⁄2’’ (8.89cm x 6.35cm) Piece 4
Fabric F, cut:298’’ (756.92cm) total of 21⁄2’’ (6.5cm) bias, for binding
Fabric I, cut:(2) 21⁄2” x WOF (6.35cm x WOF); sub-cut(24) 21⁄2” x 21⁄2” (6.35cm x 6.35cm) Piece 1
Fabric J, cut:(2) 21⁄2” x WOF (6.35cm x WOF); sub-cut(12) 21⁄2” x 21⁄2” (6.35cm x 6.35cm) Piece 1
SewingNote: Use a 1⁄4” (.64cm) seam allowance throughout. Sew all pieces with right sides together and raw edges even using matching thread.
Block A 1. For each block use (1) each of
Fabric A, Pieces 2, 3, 6, 7, 10, 11, 14, and 15 Fabric C, Pieces 12 and 13 Fabric E, Pieces 4 and 5 Fabric J, Piece 1 Fabric L, Pieces 8 and 9
2. Stitch a Piece 2 to the right side of Piece 1. Add a Piece 3 to the top of the Piece 1-2 Unit (Fig. 1 on page 4).
3. Add the remaining pieces to the 1-2-3 Unit in numerical order, working counterclockwise to complete the block (Fig. 1 on page 4).
4. Make a total of (12) Block A.
Block B 5. For each block use (1) each of
Fabric A, Pieces 2, 3, 6, 7, 10, 11, 14, and 15 Fabric D, Pieces 8 and 9 Fabric G, Pieces 12 and 13 Fabric H, Pieces 4 and 5 Fabric I, Piece 1
6. Repeat Steps 2 and 3 to make a total of (12) Block B (Fig. 2 on page 5).
Block C 7. For each block use (1) each of
Fabric A, Pieces 2, 3, 6, 7, 10, 11, 14 and 15 Fabric B, Pieces 8 and 9 Fabric H, Pieces 12 and 13 Fabric I, Piece 1 Fabric K, Pieces 4 and 5
8. Repeat Steps 2 and 3 to make a total of (12) Block C (Fig. 3 on page 6).
Quilt Top Assembly9. Lay out the completed blocks in (6) rows of (6) blocks
each noting position and orientation of Blocks A, B and C in the Block Layout diagram.
10. Sew the blocks together in each row, then sew the rows together in order, following the Quilt Layout on page 8, matching adjacent seams. The quilt top should measure 721⁄2’’ x 721⁄2’’ (184.15cm x 184.15cm).
Finishing11. Layer the backing wrong side up, batting, and quilt
top right side up. Baste the layers together and quilt as desired. Trim excess batting and backing even with the top.
12. Sew together the Fabric F bias strips using diagonal seams. Press seams open, then press the binding in half lengthwise with wrong sides together.
13. Leaving an 8” (20.32cm) tail of binding, sew the binding to top of quilt through all layers matching all raw edges. Miter corners. Stop approximately 12” (30.48cm) from where you started. Lay both loose ends of binding flat along quilt edge. Where these two loose ends meet, fold them back on themselves and press to form a crease. Using this crease as your stitching line, sew the two open ends of the binding together right sides together. Trim seam to 1⁄4” (.64cm) and press open. Finish sewing binding to quilt.
14. Turn the binding to back of quilt and hand-stitch in place.
