CUSTOM AWNINGS & PIT ACCESSORIESCUSTOM AWNINGS & PIT ACCESSORIES

Built by Racers for Racers!Built by Racers for Racers!

Table of ContentsTable of Contents

Our CustomersOur Customers

3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m

2

Since 1983, DMP has provided high-quality, American-made productsto the motorsports industry.

But long before DMP became a preferred partner of race teams world-wide, they have been racers. As a result, DMP possesses a practicalknowledge of the pit area support needs of race teams.

An accomplished bracket racer and now Top Alcohol Dragster com-petitor, Dean Dubbin, founder and President of DMP Awnings,

understands a racer’s never ending pursuit of top quality products at affordable prices. Dean and his team also under-stand that products must be manufactured to each customer’s exact specification, from select materials and built to sur-vive the rigors of the racetrack.

Rest assured that every awning, car cover and trailer/shop accessory is held to the highest quality standard. DMP con-tinually innovates products to help racers be as prepared for competition as possible.

If you have any questions about DMP products or would like to place an order, contact DMP at 320-584-8013 or log onto www.DMPAwnings.com.

Custom Built Awnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Trailer/Shop Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Custom-Made Car Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Brad Penn Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Order/Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Here is a just a small list of our valued customers. Look for them at a race near you!

MOSER ENGINEERING CHARLES CARPENTER ELLIS VIALROGER HENSEN RACING LOW MAD RACING MILLER RACE CARSNEIL AND PARKS RACING ENT. WILD COW RACING BOB CROUSE RACINGHOOSIER RACING TIRES VINNY BARONE RACING SCOTT PALMERMARTY THACKER VIERHELLER RACING ENTERPRISES FAST LIGHTS LEDsMONSTER LIGHTS RADIANT RIDES CURT & LEANNE FREDRICHMARK KRUPA VINCE NANNINI POWERSHIELD COATINGS

Custom-Built AwningsCustom-Built Awnings

3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m

3

DMP awnings are used by racers and manufacturers worldwide.Our easy ordering, easy installation and reliability make us thepreferred choice in the industry. Whether it’s standard race cartrailer, display trailer or hospitality area, DMP can make yourvision a reality.

DMP’s StandardAwnings Feature...• Quick Connects/Disconnects

NOT AN UPGRADE! Completeframework assembles from theground with only one person!

• In-house CNC machining

• Custom made for your application for a perfect fit

• All A-frames are made with larger 1.5” x 2” x .125” aluminum

• Billet brackets and plates (clear anodized)

• Stainless steel mounting hardware

• One-piece zipper included (Not an Upgrade)

• Fabric storage bag (Not an Upgrade)

• Free-standing awnings 12ft -14ft with No Legs. Wider awningsor awnings with support legs available.

• Many colors & fabrics to choose from

Upgrades/Options...• Custom sublimation printing... customize your awning with your

race team or sponsor’s logo.

• Internal air plumbed into framework

• Internal electric plumbed into framework...ideal for fans andadditional pit area lighting

Don’t see it here? Since DMP is a custom builder, additionaloptions can be manufactured to meet your specific need. Call usfor details or to get a quote.

Custom-Built AwningsCustom-Built Awnings

3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m

4

DMP Can HelpShowcase Your RaceTeam or Sponsor...With our design, printing and manufacturing capabilities, DMP canhelp your race team maximize exposure to sponsors. Our customprinting capabilities are ideal for additional sponsorship exposure,manufacturer displays or hospitality tent where a custom image isneeded. Our dye sublimation printing is UV resistant so yourdesign will have minimal fade and will look great for years to come!

From Concept to Completion!

Custom-Built AwningsCustom-Built Awnings

3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m

5

Construction & Installationof Awning...Many people get overwhelmed with the concept of installing thebrackets and the work that goes into using the awning from raceto race. Installing awning brackets is pretty simple. It takes just afew hand tools and a few hours to install the awning brackets andzipper rail. Once installed, most awnings are able to be put up andtaken down in about 30 minutes.

DMP awnings come standard with quick connect/disconnect endsthat allow the entire framework to be installed from the ground. Infact, many of our customers install the entire awning without hav-ing to climb on the roof of the trailer. It’s just five easy steps!

Lay-out framework and use quick connect ends to affix to trailerand supplied pins to connect A-frames.

Install zipper flap along zipper rail. Many teams choose to permanent-ly affix the flap to the trailer to save additional install time.

Attach anchor straps, tighten down and the installationprocess is complete in about 30 minutes!

Connect additional anchor zipper mounts to A-frame poles.

Install awning cover and connect to zipper flap. Coverinstallation can be performed using ladders from theground or from the roof of the trailer.

1

2

3

5

3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m

6Trailer/Shop AccessoriesTrailer/Shop AccessoriesDMP Can Help Outfit YourTrailer and Your Shop!DMP offers a comprehensive line of aluminum products tooutfit your pit area and your shop.

Our high-quality aluminum cabinets, work stations, benchesand other racer-friendly products are lightweight, durable andcan be custom built to your specifications.

Call us today to see how we can help with your trailer & shopaccessories needs.

3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m

7

Brad Penn Racing OilBrad Penn Racing OilDMP carries a full stock of several grades of Brad Penn Oil. Ourpricing is competitive and most orders placed are shipped sameday or can be delivered to select NHRA races. Call for pricingand availability.

BRAD PENN® brand products are truly “MADE IN THE U.S.A.”American Refining Group’s Bradford, PA refinery is the home of“The Green Oil®” that racers, engine builders and enthusiastsalike have all come to know and love! The unique green color andoutstanding performance of our Penn Grade 1 High PerformanceOils set them apart from the competition.

Protect Your Investment!DMP covers your race car/equipment with the finest waterproof, 100% woven nylon with vinyl backing that will notscratch your finish. The 10 oz. per square yard fabric hasbeen field tested for outdoor durability.

DMP’s covers are guaranteed, for workmanship and quality,under normal usage. There are several colors to choose from.Or, if you would like, you could personalize your cover withembroidery. We would be glad to help you with your cover needs.

6 Colors to Choose

Black Red Blue Orange Purple Wine

Covers available for...• Dragsters • Funny Cars• Altereds • Doorcars• Jr. Dragsters • Tool Boxes/Pit Equipment• Golf Carts & More!

Custom Embroidery alsoavailable! Call for details.

Custom-Made CoversCustom-Made Covers

707 N Juniper StRoyalton, Mn 56373

We Got You Covered!We Got You Covered!

Order InformationOrder Information

3 2 0 - 5 8 4 - 8 0 1 3 • w w w . D M P A w n i n g s . c o m

DMP offers three convenient ways to order products.

1. Phone: Call 320-584-8013. Have your order info, including specs, part numbers, etc, as well as payment info ready to take advantage of the best turnaround in the industry.

2. Fax: Fax orders to 320-584-8013. Please include your complete order info and credit card info, includingaccount number, expiration date, security code (last 3 digits on signature panel), billing address andname of cardholder.

3. E-Mail: E-mail orders to info@DMPAwnings.com. DO NOT INCLUDE CREDIT CARD INFO IN YOURE-MAIL. Upon receipt of your order, a DMP representative will contact you for payment info.

All orders are prepaid with a credit card unless other arrangements have been made with an authorized DMP repre-sentative.