5/2006

Manufacturer andFabricator ofRubber and Plastic Products• Custom Gasket Fabrication

• Molded and Extruded Rubber Parts

• Molded and Fabricated Rubber Stoppers

• Tubing- Rubber and Plasticand Assemblies

• Custom ThermoplasticFabrication

Custom Thermoplastic Fabrication

Other Specialties

Buffalo, New YorkBaton Rouge, Louisiana

Northern Headquarters:137 Arthur Street • Buffalo, NY 14207 USA(716) 877-7400 • Fax (716) 877-0743www.princerp.com • Email: contact@princerp.com

Southern Division:11400 Richcroft Avenue • Baton Rouge, LA 70814 USA(225) 272-1653 • Fax (225) 272-1938

Industrial Plastics Canada LTDFort Erie, Canada

Thermoplastic FabricationWe Met the Challenge of What It Takes to Engineer CloseTolerance Custom-Built Thermoplastic Parts and Assemblies.

• 70 Years of Fabrication Experience• Precision Fabrication Equipment• Qualified, Technical Fabricators• Dedicated Customer Services Staff• In Process Quality Control Program• Prototyping before Production Run

Plastic Fabrication ProductsPrefabricated Piping Systems,Tanks, Trays, Hoods, Sinks, and Ducting.Custom Components, Filter Parts, Formed Parts,Machined Fittings, Machined Parts,Thermoformed Piping From 1/8” to 6” Diameter,Thermoplastic OEM Parts.

Fabrication Methods and ProcessesCNC Overhead Router, Radial Arm Drill and Tap,

Drill Press, Thermal Sheet Bending, Fusion Plate Welder, Adjustable Table BandSaw, Air Shear, Two Post Hydraulic Press, Traveling Head Press, Pipe Threaded,Thermoformed Welding Equipment, Internal and External Threading Equipment.

Other Specialties• Bonding Cements - for various Rubber

and Plastics• Air and Fume Ducting, Rubber and Plastic• Special Chemical and Industrial Hose• Matting and Bumpers• UHMW “Wear” Products• Specialty Valves• Flange and Valve Covers for Maintenance Protection• Expansion Joints of Rubber and FluoroplasticFabrication ProcessesPrince Fabricates from three locations across NorthAmerica, These facilities have production specificcapability, but all locations inventory Prince“Panacea”®®®®® materials and standard commercialmaterials. Our shops maintain In-Process QualityControl Inspection Procedures for all parts produced.

Industrial PlasticsCanada LTD625 Industrial DriveFort Erie, OntarioL2A 5M6 CANADA(905) 871-0412Fax (905) 871-6494IPCL@princerp.com

www.IndustrialPlasticsCanada.com

(716) 877-7400 • Fax (716) 877-0743 • www.princerp.com • Email: contact@princerp.com (716) 877-7400 • Fax (716) 877-0743 • www.princerp.com • Email: contact@princerp.com

Gasket Fabrication Custom and Standard Materials Rubber Stoppers and Stopper GasketsStandard and Custom Fabrications

Molded and Extruded Rubber PartsRubber and Plastic Tubing and Hose

Fabrication and Assemblies

For gasketing applications utilized worldwide, we havedeveloped many Prince “Panacea”® SpecialtyCompounds. One of the most recent developmentsis the armoring of Elastomers with high temperatureFluoroplastics. This ability has created a material withsuperior corrosion resistance and increased longevity.

Prince is challenged every day with tough to handleapplications primarily in the Chemical Industry. Ourtechnical personnel and highly trained and experiencedShop Technicians can meet your challenges.

Prince “Panacea”® SpecialtyCompounds for the Chemical Industry• 6962 and 6760 Special EPDM• 5170 Special Pure Gum• Tygon® – R3400, PP340, PP363 Vinyls• PT-70 Special PTFE Protected EPDM• Fluoropolymer Protected Elastomers• PTG-White PTFE Fluoroplastic Beaded• 1475 TFE-P Tetrafluoroethylene Elastomer• PT-101 Expanded PTFE• 13-75B Viton CompoundMaterial specification sheets are available upon request.Experienced personnel can help advise on how to solvesealing problems

Gasketing Types• Vulcanized• Large Gasket Types• Adhesive Backed• Heat Spliced• Enveloped• Machined• Armored Fluoroplastic• Segmented• Molded and Extruded

Commercial MaterialsNatural Rubber, Silicon, Viton,Butyl, Nitrile, Neoprene, EPDM,SBR, Expanded PTFE,Polyethylene, Polypropylene,“Asbestos Substitute”, SpiralWound Products

Custom and Standard Rubber Molded PartsWe manufacture and Fabricate Standard Molded Parts, Custom Molded Parts andMachine Fabricated Parts. We mold Grommets, Bumpers, Plugs, Stops etc., within acomplete spectrum of elastomers. Prince can handle your needs from the conceptand drawing stages to prototypes and production runs. We mold in a size range ofless that 1/8” to large molded parts. These parts can be produced to standardcommercial tolerances or tighter tolerances if required.

Custom and Standard ExtrusionsCords “U” Channels, Square, Rectangle, Bulb, etc. are produced daily. We canassist you in determining what is the best Material, Hardness, and Tolerances

for your application. If developing a custom extrusion isrequired we will assist to insure your parts meet all thenecessary requirements.

MaterialsCommercial Elastomers, Specialty Compounds, HighlyEngineered Elastomers, Dual Durometer, Dual Molding.

Secondary FabricationsDrilling, Splicing, Punching, Grinding, Adhesive Backed.

Chemical Resistance Challenges and AchievementsWe have developed numerous ways to Armor or protect Elastomeric parts with a Fluoropolymer protection. Wecan also mold or extrude parts utilizing two compounds. These unique options provide additional protectionfrom Chemical Attack. These options may also increase the longevity as well as reduce cost overall.Small Rubber Parts Catalog — A Complete Catalog Listing of Standard Molded Shapes and Extrusion Profiles is available upon request.

StoppersPrince supplies the Laboratory, Pharmaceutical,Chemical and Industrial Markets with StandardMolded and Custom Fabricated Stoppers. We moldstandard size Stoppers with 1 and 2 Holes as wellas Machine Fabricate. Custom Molding isalways an option.

Standard SizesRange - from 000 - to size 16.

MaterialsStandard Black SBR Rubber, Pure Gum and GreenNeoprene, Silicone and EPDM. Other custommaterials and Prince “Panacea”® SpecialtyCompounds are available for molding.

Custom Drilling and FabricationWe have many hole drill sizes to Custom drill anysize stopper to your requirements. We also Machine Fabricatespecial size Stoppers and Stopper Gaskets or other MachineFabricated Rubber Parts needed.Rubber Stopper Brochure — is available upon request with a complete listing ofavailable Dimensions, Tolerances and Specification of Materials.Price List available.

Tubing and Tubing AssembleWe supply High Performance and Standard Plastic and Rubber Tubing as wellas Custom Extruded Rigid and Flexible Rubber and Plastic Tubing. Our ShopFabrication capabilities enables our customers the ease and ability to designtheir parts as needed and have Prince Produce, Fabri-cate and Assemble the part to print.

Fabrication CapabilitiesAssembly, Thermoforming, Cut to Length, Slitting,Coiling, Straight Cuts, Socket and Bell Ends, HeatSplicing, Special Braiding. Tube Fittings available.

Materials — PlasticsCertified Tygon®®®®® Tubing Distributor, Prince’s Custom“Panacea”®®®®® Brand Tubings, PVC, Latex, Santoprene®®®®®,PVDF, Teflon®®®®®, PTFE, FEP, Nylon, Polyethylene,Polyurethane.

Materials — RubberPure Gum, Neoprene, Nitrile, EPDM, SBR, Silicone, Viton®®®®®,Prince “Panacea”® Specialty Compounds.

(716) 877-7400 • Fax (716) 877-0743 • www.princerp.com • Email: contact@princerp.com (716) 877-7400 • Fax (716) 877-0743 • www.princerp.com • Email: contact@princerp.com

Gasket Fabrication Custom and Standard Materials Rubber Stoppers and Stopper GasketsStandard and Custom Fabrications

Molded and Extruded Rubber PartsRubber and Plastic Tubing and Hose

Fabrication and Assemblies

For gasketing applications utilized worldwide, we havedeveloped many Prince “Panacea”® SpecialtyCompounds. One of the most recent developmentsis the armoring of Elastomers with high temperatureFluoroplastics. This ability has created a material withsuperior corrosion resistance and increased longevity.

Prince is challenged every day with tough to handleapplications primarily in the Chemical Industry. Ourtechnical personnel and highly trained and experiencedShop Technicians can meet your challenges.

Prince “Panacea”® SpecialtyCompounds for the Chemical Industry• 6962 and 6760 Special EPDM• 5170 Special Pure Gum• Tygon® – R3400, PP340, PP363 Vinyls• PT-70 Special PTFE Protected EPDM• Fluoropolymer Protected Elastomers• PTG-White PTFE Fluoroplastic Beaded• 1475 TFE-P Tetrafluoroethylene Elastomer• PT-101 Expanded PTFE• 13-75B Viton CompoundMaterial specification sheets are available upon request.Experienced personnel can help advise on how to solvesealing problems

Gasketing Types• Vulcanized• Large Gasket Types• Adhesive Backed• Heat Spliced• Enveloped• Machined• Armored Fluoroplastic• Segmented• Molded and Extruded

Commercial MaterialsNatural Rubber, Silicon, Viton,Butyl, Nitrile, Neoprene, EPDM,SBR, Expanded PTFE,Polyethylene, Polypropylene,“Asbestos Substitute”, SpiralWound Products

Custom and Standard Rubber Molded PartsWe manufacture and Fabricate Standard Molded Parts, Custom Molded Parts andMachine Fabricated Parts. We mold Grommets, Bumpers, Plugs, Stops etc., within acomplete spectrum of elastomers. Prince can handle your needs from the conceptand drawing stages to prototypes and production runs. We mold in a size range ofless that 1/8” to large molded parts. These parts can be produced to standardcommercial tolerances or tighter tolerances if required.

Custom and Standard ExtrusionsCords “U” Channels, Square, Rectangle, Bulb, etc. are produced daily. We canassist you in determining what is the best Material, Hardness, and Tolerances

for your application. If developing a custom extrusion isrequired we will assist to insure your parts meet all thenecessary requirements.

MaterialsCommercial Elastomers, Specialty Compounds, HighlyEngineered Elastomers, Dual Durometer, Dual Molding.

Secondary FabricationsDrilling, Splicing, Punching, Grinding, Adhesive Backed.

Chemical Resistance Challenges and AchievementsWe have developed numerous ways to Armor or protect Elastomeric parts with a Fluoropolymer protection. Wecan also mold or extrude parts utilizing two compounds. These unique options provide additional protectionfrom Chemical Attack. These options may also increase the longevity as well as reduce cost overall.Small Rubber Parts Catalog — A Complete Catalog Listing of Standard Molded Shapes and Extrusion Profiles is available upon request.

StoppersPrince supplies the Laboratory, Pharmaceutical,Chemical and Industrial Markets with StandardMolded and Custom Fabricated Stoppers. We moldstandard size Stoppers with 1 and 2 Holes as wellas Machine Fabricate. Custom Molding isalways an option.

Standard SizesRange - from 000 - to size 16.

MaterialsStandard Black SBR Rubber, Pure Gum and GreenNeoprene, Silicone and EPDM. Other custommaterials and Prince “Panacea”® SpecialtyCompounds are available for molding.

Custom Drilling and FabricationWe have many hole drill sizes to Custom drill anysize stopper to your requirements. We also Machine Fabricatespecial size Stoppers and Stopper Gaskets or other MachineFabricated Rubber Parts needed.Rubber Stopper Brochure — is available upon request with a complete listing ofavailable Dimensions, Tolerances and Specification of Materials.Price List available.

Tubing and Tubing AssembleWe supply High Performance and Standard Plastic and Rubber Tubing as wellas Custom Extruded Rigid and Flexible Rubber and Plastic Tubing. Our ShopFabrication capabilities enables our customers the ease and ability to designtheir parts as needed and have Prince Produce, Fabri-cate and Assemble the part to print.

Fabrication CapabilitiesAssembly, Thermoforming, Cut to Length, Slitting,Coiling, Straight Cuts, Socket and Bell Ends, HeatSplicing, Special Braiding. Tube Fittings available.

Materials — PlasticsCertified Tygon®®®®® Tubing Distributor, Prince’s Custom“Panacea”®®®®® Brand Tubings, PVC, Latex, Santoprene®®®®®,PVDF, Teflon®®®®®, PTFE, FEP, Nylon, Polyethylene,Polyurethane.

Materials — RubberPure Gum, Neoprene, Nitrile, EPDM, SBR, Silicone, Viton®®®®®,Prince “Panacea”® Specialty Compounds.

5/2006

Manufacturer andFabricator ofRubber and Plastic Products• Custom Gasket Fabrication

• Molded and Extruded Rubber Parts

• Molded and Fabricated Rubber Stoppers

• Tubing- Rubber and Plasticand Assemblies

• Custom ThermoplasticFabrication

Custom Thermoplastic Fabrication

Other Specialties

Buffalo, New YorkBaton Rouge, Louisiana

Northern Headquarters:137 Arthur Street • Buffalo, NY 14207 USA(716) 877-7400 • Fax (716) 877-0743www.princerp.com • Email: contact@princerp.com

Southern Division:11400 Richcroft Avenue • Baton Rouge, LA 70814 USA(225) 272-1653 • Fax (225) 272-1938

Industrial Plastics Canada LTDFort Erie, Canada

Thermoplastic FabricationWe Met the Challenge of What It Takes to Engineer CloseTolerance Custom-Built Thermoplastic Parts and Assemblies.

• 70 Years of Fabrication Experience• Precision Fabrication Equipment• Qualified, Technical Fabricators• Dedicated Customer Services Staff• In Process Quality Control Program• Prototyping before Production Run

Plastic Fabrication ProductsPrefabricated Piping Systems,Tanks, Trays, Hoods, Sinks, and Ducting.Custom Components, Filter Parts, Formed Parts,Machined Fittings, Machined Parts,Thermoformed Piping From 1/8” to 6” Diameter,Thermoplastic OEM Parts.

Fabrication Methods and ProcessesCNC Overhead Router, Radial Arm Drill and Tap,

Drill Press, Thermal Sheet Bending, Fusion Plate Welder, Adjustable Table BandSaw, Air Shear, Two Post Hydraulic Press, Traveling Head Press, Pipe Threaded,Thermoformed Welding Equipment, Internal and External Threading Equipment.

Other Specialties• Bonding Cements - for various Rubber

and Plastics• Air and Fume Ducting, Rubber and Plastic• Special Chemical and Industrial Hose• Matting and Bumpers• UHMW “Wear” Products• Specialty Valves• Flange and Valve Covers for Maintenance Protection• Expansion Joints of Rubber and FluoroplasticFabrication ProcessesPrince Fabricates from three locations across NorthAmerica, These facilities have production specificcapability, but all locations inventory Prince“Panacea”®®®®® materials and standard commercialmaterials. Our shops maintain In-Process QualityControl Inspection Procedures for all parts produced.

Industrial PlasticsCanada LTD625 Industrial DriveFort Erie, OntarioL2A 5M6 CANADA(905) 871-0412Fax (905) 871-6494IPCL@princerp.com

www.IndustrialPlasticsCanada.com