C u s t o m e r O r d e r F o r m
March 2020
2PC-DT-02 Rev 2.0
• Aluminum mainframe and sash frames.
• Outside mounting fin: window recesses 1 7/8” into
opening. Side-load sashes have springs on left side of sash. All sashes are equal size.
• Ordered size can exceed the maximum by 1” in width or height before going to the next pricing tier (i.e. 37” wide costs the same as 36”, but 37 1/
4”
jumps to 42” tier).
• Optional vent quantities: 3-vents or 4-vents. Refer to size chart for minimum and maximum sizes. 3-vents not available over 90” tall.
• Spreader bar is required on actual unit widths that exceed 30” wide. If spreader bar is needed in smaller sizes, request clearly in notes section.
• Call for pricing on any size larger than listed below, oversized windows will not be warranted.
• Over-screening available for easy field adjustment and tightening.
FlexiGlaze film returns to its original state in seconds with no glass to break!
FOUR TRACK OPTIONS
Extra spreader bar in sashes................*Additional charge
Extra sash.....................................................*Additional charge
Uneven sashes............................................*Additional charge
3 OR 4 VENT STACKABLE WINDOW
Inches 24 30 36 42 48 54 60 Options & Deductions
30 3 Vent 3 Vent 3 Vent 3 Vent 3 Vent 3 Vent 3 VentBetter View
ScreenSuper Screen No Screen
36 4 Vent 3 Vent 3 Vent 3 Vent 3 Vent 3 Vent 3 Vent
*Additional Charge
*Additional Charge
*Price Reduction
Applies
42 4 Vent 3 Vent 3 Vent 3 Vent 3 Vent 3 Vent 3 Vent
48 4 Vent 3 Vent 3 Vent 3 Vent 3 Vent 3 Vent 3 Vent
54 4 Vent 4 Vent 4 Vent 3 Vent 3 Vent 3 Vent 3 Vent
60 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent
66 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent
72 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent
78 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent
84 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent
90 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent
96 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent
102 4 Vent 4 Vent 4 Vent 4 Vent 4 Vent Not available
Shaded sizes are 3-vent windows
*For mulled units, there is an additional charge.
Hei
ght
Width
Prices subject to change without notice.Suggested list prices effective: 3/1/2020.
(419) 491-3660
White Tan Clay Bronze Black
FLEXIGLAZE MEMORY VINYL COLORS
FRAME COLORS
SCREEN TYPES
StandardStandard
fiberglass mesh.
Better ViewFiner screen mesh
preserves optical clarity, prevents dirt and debris
from staying on the screen, and remains
cleaner longer.
Super ScreenHeavy duty,
impact-resistant screen.
WINDOWPRICING
Clear LightGray
DarkGray
Bronze
3PC-DT-02 Rev 2.0
White Tan Clay Bronze Black
FRAME COLORS
DOOROPTIONS
PREMIUM CABANA DOOR
Standard size....................................................................*List Price
Custom size....................................................*Additional Charge
Standard Widths: 32”, 34”, 36”
Standard Height: 80”
Optional Threshold recommended- adds 1 1/4” to door height
Includes: Black mortise hardware, lock set, 1 closer and
factory trimmed door screen
Hardware Options:
Brass Handle Set w/Additional Closer..............................*Additional Charge
Satin Silver Handle Set w/Additional Closer..................*Additional Charge
Oil Rubbed Bronze Handle Set w/Add. Closer...............*Additional Charge
*All closers are white or black
*Black mortise handles have a brass thumb turn. Upgraded handles have a color matched thumb turn.
PREMIUM CABANA DOOR OPTIONS
Hardware kit includes black hydraulic closer(s) and zinc-
plated chain kit.
ADDITIONAL CHARGES:
Threshold (adds 1 1/4” to O/A door height)
In-swing door up-charge (requires threshold)
French Door kit (requires two doors)
Extra Closer
Better View Screen
Super Screen
Hardware Warranty: 2 years on operation and finish.
NOTE: In-swing handle sets are black with door closure,
ensuring the closer, bracket and handle all match. If
another handle color is ordered, the bracket and closer
will be black.
(Prices subject to change without notice.)
4PC-DT-02 Rev 2.0
LIP FRAMEFIXED ONE-LITE
Aluminum Picture SashRectangle or Trapezoid: Windows made to opening sizeSash insert made using lip frame extrusion
ALUMINUM PICTURE SASHSUGGESTED PRICE LIST
MEASURING• Provide the smallest daylight opening sizes for each
opening, both height and width, by measuring in at least two places.
• Standard deductions from rough opening is 1/4”
height and width.
• Be sure there is room for the 7/8” mounting fin at
corners, mullions*, floor, and ceiling.
*Deduct for Mullions where needed. Mullions (2x2) SRF 22 extrusions can be used with (1x2 Expander) SRE-12 to level floors or walls- combined deduction of 2 1/
4”. Clearly note on Order Form.
WindowRough Opening
DoorRough Opening
Dashed line isthe Mounting Fin
W
W
H H
H - 1/4”
W - 1/4”
Trapezoid UI= A+B+CRectangle UI=A+B
WITH FLEXIGLAZE OR TEMPERED GLASS
SIZE LIMITS:
For FlexiGlaze Vinyl: min 6” x 6”, max 52” x 96”.
• For Glass: min 12” x 12”, max 42” x 96”.
• For Trapezoids: min width 12”, max width 72”, min leg height
6”, max short leg height is 34”, max tall leg height 54”.
• For Glass: max of 20 sf. (includes traps, measured width x tall
leg height).
*To join a Lip Frame above or below a Window, add $62 per 2x2 Mull and deduct the 2” in the overall height calculations. The two windows will be ordered separately. Clearly note if this is the case.
Rectangle UI=A+B Trapezoid UI= A+B+C
WITH FIBERGLASS SCREEN
SIZE LIMITS:
• For Screens: min 6” x 6”, max 60” x 96”.
• For Trapezoids: min width 12”, max width 72”, min leg height
6”, max short leg height is 34”, max tall leg height 54”.
Standard colors: White, Tan, Clay, Bronze, Black
(Prices are subject to change without notice.)
A
B
C
A
B
5PC-DT-02 Rev 2.0
WINDOW/DOOR ORDER FORM1445 Holland Rd., Maumee, OH 43537
O: (419) 491-3660 F: (419) 386-2683
CUSTOMER INFORMATION
SHIP TO ADDRESS:
PHONE:
EMAIL:
DATE:
DEALER NUMBER/NAME:
PO# / JOB NAME:
ORDERED BY:
☐ Request for Quote ☐ Order for Production
FRAME COLOR
☐White
☐Tan
☐Clay
☐Bronze
☐Black
FLEXIGLAZE MEMORY VINYL COLOR
☐Clear
☐Light Gray
☐Dark Gray
☐Bronze
SCREEN TYPE
☐Standard
☐Better View
☐Super Screen
Tip to Tip would be Exact Frame Size not including fin with no deductions.
4 Track Vertical Windows
Window # QTY TW - TR Width X Height
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Lip Frame Windows
Window # QTY Width X Height
15
16
17
18
19
20
21
22
23
24
25
26
27
28
4 Track Door - Height measurement needs to be 1/4” shorter than opening
Window # QTY Width x Height Hinges R/L? Swings In/Out?
29
30
31
32
TYPE OF MEASUREMENT
☐ DLO (1/4”) deduction from ordered size
☐ Exact (actual frame size) not including 7/8” fin
SPECIAL NOTES
TW - Twin Unit TR - Trip Unit (Additional charge for Mullion strips)
(*Confirmations will be read as outside looking in.)
Threshold (adds 1.25” to assembly height)☐Mortise Black (Standard)☐Mortise Oil Rubbed Bronze☐Mortise Satin Silver☐
*Mortise handles on standard doors will be centered.
Inswing Handle Kit - Black☐
Circle hinge side fromOUTSIDE looking in.
Extra Closer☐
☐ ☐Trimmed Screen
(Nominal Upcharge) Over-screened
6PC-DT-02 Rev 2.0
SCREEN COMPONENTS ORDER FORM1445 Holland Rd., Maumee, OH 43537
O: (419) 491-3660 F: (419) 386-2683
Part Number Illustration & Description Colors Size Quantity Unit
SRF-22
White
EA
Clay
Tan
Bronze
Black
SRC-22
White
EA
Clay
Tan
Bronze
Black
SRF-12
White
EA
Clay
Tan
Bronze
Black
SRE-12
White
EA
Clay
Tan
Bronze
Black
A-712
White
EA
Clay
Tan
Bronze
Black
FC-6
FC-22
White
EA
Clay
Tan
Bronze
Black
WS-15R Black ROLL
SEE FOLLOWING PAGE FOR SCREEN OPTIONS (Prices subject to change without notice.)
SHIP TO ADDRESS:
PHONE:
EMAIL:
DATE:
DEALER NUMBER/NAME:
PO# / JOB NAME:
ORDERED BY:
2” x 2” extruded frame
2” x 2” extruded outside corner
1” x 2” extruded frame
1” x 2” expander
Combination lip frame
Mullion F Clip
Foam tape
Notes:
*Lineals are sold in stock lengths. Can be cut to desired length for a 10% premium.
7PC-DT-02 Rev 2.0
SCREEN OPTIONS ORDER FORM1445 Holland Rd., Maumee, OH 43537
O: (419) 491-3660 F: (419) 386-2683
SHIP TO ADDRESS:
PHONE:
EMAIL:
DATE:
DEALER NUMBER/NAME:
PO# / JOB NAME:
ORDERED BY:
Notes:
Part Number
Illustration & Description Quantity LN. FTBulk
Quantity# ROLLS
FS
Any Length 100’/RL
Any Length 100’/RL
Any Length 100’/RL
Any Length 100’/RL
Any Length 100’/RL
Any Length 100’/RL
FSBV-48FSBV-60FSBV-72
Any Length 100’/RL
Any Length 100’/RL
Any Length 100’/RL
FSSUP-48FSSUP-60
Any Length 100’/RL
Any Length 100’/RL
SP-160SP-1754T-SPV
.160 Screen Spline - Black
.175 Screen Spline - BlackV-Spline (For 4-Track Vinyl Windows)
Any Length 1500’
Any Length 1500’
Any Length 8’
(Charcoal)(Gray) *Special Order*
160 - Windows175 - Walls
FIBERGLASS SCREEN
48”SUPER SCREEN
Heavy duty, impact-resistant screen.
160 - Spline 60”
36”
42”
48”
54”
60”
72”
48”
60”
72”
30% Smaller holes than standard.011 thickness
175 - Spline
BETTER VIEW
Part Number
Illustration & Description Colors Size LN. FT. UNIT
VFILM-CLVFILM-GRVFILM-BZ
FlexiGlaze Memory Vinyl
Clear
54” SQ FTLight Gray
Dark Gray
Bronze
K7N Nylon 2” x 1/8” EANylon Screen Roller
for fiberglass screen
(Prices subject to change without notice.)
8PC-DT-02 Rev 2.0
Part Number Illustration & Description Colors Size Quantity
HTS-58HTS-1
White
Clay
Tan
Bronze
Black
SDS-34
White
Clay
Tan
Bronze
Black
LAG-1LAG-2
MillMill
1/4” x 1 1/
4”
HD-1 Mill
TH-36TH-42TH-84
Mill
36”
42”
84”
NCB-1White
Black
SC-2
White
Each TubeClayTan
BronzeBlack
PAINT
WhiteClayTan
BronzeBlack
VINCLEAN ---------------------- 15oz
ALUMLUBE ---------------------- 15oz
HARDWARE & FASTENERS ORDER FORM1445 Holland Rd., Maumee, OH 43537
O: (419) 491-3660 F: (419) 386-2683
SHIP TO ADDRESS:
PHONE:
EMAIL:
DATE:
DEALER NUMBER/NAME:
PO# / JOB NAME:
ORDERED BY:
Notes:
(Prices subject to change without notice.)
Hex-Head Tek Screw(Self-tapping)
Square Head Tek Screw(Self-tapping)
LAG (Awning & Canopy)LAG (Patio cover mounting)
Drive Anchor
Aluminum Threshold
Nylon Closer Bracket
Silicone (12 tubes in case)
Touch-Up Paint
Vinyl Cleaner
Alum-a-lube