TENSION LED SYSTEM
CUT SHEET
DESCRIPTIONThe award-winning Tension LED System offers uniform backlighting for virtually an endless list of diffusers and materials. Regardless of depths and plenum, the TLS with its patented point-to-point substrate free design provides for architectural integration for your lighting designs
FEATURES • Non-ferrous system • High brightness • Uniform Lighting • Heat Sink Technology to maximize life span • Low Power consumption • Energy Saving and Maintanance Free • Tensioning System • Retrofitting • Limitless sizes
UPDATED June, 2020
w w w . t l s - l e d . c o m
dless of depths and plenum, the TLS with sign provides for architectural integration
span
Non-ferrous system
non magnetic parts allow our system to be MRI room friendly.
LIGHT WEIGHTSYSTEM
At 70 grams per square foot, the TLS systemrequires no special reinforcements
SINGLE / DOUBLE SIDED
Our TLS LED boards are available in single or double sided with little difference in cost
UNIFORM LIGHTING ENERGY EFFICIENT
The TLS allows an even light density, avoiding hotspots
CUSTOM SPACING BETWEEN LED BOARDS
Optimize the spacing between boards depending on diffuser material, setback
and lumens output requirements
SUBSTRATE FREESYSTEM
The TLS system offers point-to-point substrate free tensioning up to 500 lbs
TLS ADVANTAGES
1w w w . t l s - l e d . c o m
OBSTACLESINSERTION
Since no mounting substrate is required the TLS can maneuver around any obstacle in place
ACOUSTIC FLOW THROUGH
The TLS Static allows for acoustic flow through of the full frequency spectra, improving on room acoustics
N f t
TLS BOARDS DIMENSIONS
TLS INFO
2w w w . t l s - l e d . c o m
Position 3 +
4/5 SEGMENTED BOARD
3/5 SEGMENTED BOARD
2/5 SEGMENTED BOARD
1/5 SEGMENTED BOARD
FULL BOARD
Position 3 +
Position 1 +
Position 1 +
Position 1 + Position 2 -
Cut 1 Cut 2 Cut 3 Cut 4
Position 6 -
Position 16 -
Position 12 -
Position 10 -
TLS STATIC SPEC CODE GENERATOR
QUANTITYLIGHTINGSOLUTION
SOLUTION
SHAPE WIDTH HEIGHTUNIT CCT APPLICATION MOUNTING MEDIA CONTROL PITCH IP
Rectangle (RE) Inch (IN)
Milimeter (MM)
2700K (27K)3000K (30K)3500K (35K)4000K (40K)5600K (56K)6500K (65K)
Ceiling (CL)Wall (WL)
Surface (SM)Recessed (RE)Suspended (SU)
Media Foil (MF)Media TexLight 170 (ML)
0-10v (0_10)DMX (DMX)Dali (DL)Manual (ML)No Dimming (ND)
Premium (P)Standard (S)Custom (CU)
Indoor (I)Outdoor (O)
QUANTITYLIGHTING SHAPE WIDTH HEIGHTUNIT CCT APPLICATION MOUNTING MEDIA* CONTROL PITCH IPTLS- REST
Fit to Build (FB)
*Only for Fit To Build
Or visit: https://www.tls-led.com/static.php#formCodeGenerator
76
114
96.04
33.
50
63.04
58.40
31.
20
90.40
*All dimensions are in millimeters
3w w w . t l s - l e d . c o m
TLS MASTER DIMMER CONTROLLER / TMD-320
TOP VIEW SIDE VIEW
FRONT VIEW 7
6
94
76.04
TENSION LED SYSTEM
43.04
33.
50
31.
20
58.40
TLS DIMMER REPEATER / TDR-320 TLS REMOTE / TSRT
TOP VIEW SIDE VIEW
FRONT VIEW
TLS CONTROLLERS
33.
50
TLS STATIC PREMIUM INDOOR SINGLE / DOUBLE SIDED
The indoor Tension LED System is a patented and UL certified LED lighting system that provides uniform surface lighting that can cover any size or shape no matter the obstacles in place. Narrow lightweight LED strips placed in a lattice format extend from a positive to a negative 1/16-inch special stainless-steel cable that not only connects to conductive tension-ers but also conducts the electrical current. Thanks to these tensioners, the system can be perfectly tensioned to fit any surfaces with no sagging, hotspots or additional wires. Recommended distance from the LED to the diffuser with TLS Static Premium is 75mm.
APPLICATIONS • Ceiling • Wall Mounted • Freestanding • Column • Retrofit
TLS STATIC PREMIUM INDOOR
TLS STATIC
TLS OPTIONS
4w w w . t l s - l e d . c o m
34"
19mm
14"
44.3
0mm
1538"
390mm
23 8"60
mm
3 8"10
mm
2.953in75mm
22.520in572mm
2.362in60mm
FRONT VIEW
SIDE VIEW
TOP VIEW
[2.953in]75mm
[22.520in]572mm
[2.362in]60mm
TLS STATIC AA PREMIUM INDOOR SINGLE / DOUBLE SIDED
TLS STATT TIC A PREMIUM INDOOR
2.953in75mm
22.520in572mm
2.362in60mm
FRONT VIEW
SIDE VIEW
TOP VIEW
TLS STATIC STANDARD INDOOR SINGLE / DOUBLE SIDED
The indoor Tension LED System is a patented and UL certified LED lighting system that provides uniform surface lighting that can cover any size or shape no matter the obstacles in place. Narrow lightweight LED strips placed in a lattice format extend from a positive to a negative 1/16-inch special stainless-steel cable that not only connects to conductive tension-ers but also conductsthe electrical current. Thanks to these tensioners, the system can be perfectly tensioned to fit any surfaces with no sagging, hotspots or additional wires. Recommended distance from the LED to the diffuser with TLS Static Standard is 145mm.
APPLICATIONS • Ceiling • Wall Mounted • Freestanding • Column • Retrofit
1.
181i
n30
mm
0.748in19mm
4.72
4in
120m
m
0.
394i
n10
mm
15.354in390mm
TLS OPTIONS
5w w w . t l s - l e d . c o m
[2.953in]75mm
[22.520in]572mm
[2.362in]60mm
[1.1
81in
]30
mm
[0.748in]19mm
TLS STATIC STANDARD INDOOR
TLS STATIC
TLS STATICAA STANDARD INDOORTT
STANDARD INDOORTT
TLS STATIC PREMIUM OUTDOOR SINGLE / DOUBLE SIDED
The outdoor Tension LED System is a patented, IP55 rated and UL certi-fied LED lighting system that provides uniform surface lighting. Ideal for outdoor applications, pools, spas or any space with a high dust concentra-tion, the system is more flexible than ever. Narrow lightweight LED strips placed in a lattice format extend from a positiveto a negative 1/16-inch special stainless-steel cable that not only connects to conductive tension-ers but also conducts the electrical current. Thanks to these tensioners, the system can be perfectly tensioned to fit any surfaces with no sagging, hotspots or additional wires. Recommended distance from the LED to the diffuser with TLS Static Premium is 75mm.
APPLICATIONS • Ceiling • Wall Mounted • Freestanding • Column • Retrofit
TLS OPTIONS
6w w w . t l s - l e d . c o m
34"
19mm
14"
44.3
0mm
1538"
390mm
23 8"60
mm
3 8"10
mm
2.953in75mm
22.520in572mm
2.362in60mm
FRONT VIEW
SIDE VIEW
TOP VIEW
[2.953in]75mm
[22.520in]572mm
[2.362in]60mm
TLS STATIC PREMIUM OUTDOOR
TLS STATIC
IP55
TLS OPTO PREMIUM INDOOR SINGLE SIDED
The Tension LED System OPTO is a patented and UL certified LED lighting system that provides uniform surface lighting that can cover any size or shape no matter the obstacles in place. TLS OPTO includes OPTO spread optic lenses to diffuse light at wide angles which expand application pos-sibilities by reducing the distance behind the diffuser (< 32 mm) and thus allowing for very narrow profiles. Narrow lightweight LED strips placed in a lattice format extend from a positive to a negative 1/16 inch special stain-less-steel cable that not only connects to conductive tensioners but also conducts the electrical current. Thanks to these tensioners, the system can perfectly tensioned to fit any surfaces with no sagging, hotspots or additional wires. Recommended distance from the LED to the diffuser with TLS Opto Premium is 40mm.
APPLICATIONS • Ceiling • Wall Mounted • Freestanding • Column • Retrofit
TLS OPTIONS
7
FRONT VIEW
SIDE VIEW
TOP VIEW
15.088in383.24mm
0.75
5in
19.1
8mm
2.36
2in
60m
mFRONT VIEW
1.19
7in
30.4
0mm
0.748in19mm
22.520in572mm
2.953in75mm
2.362in60mm
TLS OPTO PREMIUM INDOOR
TLS OPTO
S OPTO PREMIUM INDOOR SINGLE SI
that provides uniformatter thees
MIUM INDOOR
PS 1
2-24
V DC
(up
to 3
20W
)
TLS System (up to 280W)
TLS Master Dimmer (TMD-320)
TLS Dimmer Repeater (TDR-320)
Power
0-10V Input (option)
to next TLS Dimmer Repeater (TDR-320)
TLS Master Dimmer(TMD-320)
TLS Dimmer Repeater(TDR-320)
*One TLS Master Dimmer (TMD-320) can connect to multiple columns up to 280W
TENSION LED SYSTEM
PS 1
2-24
V DC
(up
to 3
20W
)
Power
TE
NS
ION
LE
D S
YS
TE
M
TLS Remote(TSRT)
DIMMING OPTIONS DIAGRAM
TLS DIAGRAM
8w w w . t l s - l e d . c o m
9w w w . t l s - l e d . c o m
CCT RANGE OPTIONS
2700K 3000K 3500K 4000K 5600K 6500K
TLS SPECIFICATIONS
LIMITLESS SIZES
*Customizable upon request
Example for 618 x 1280 mm box with premium configuration at 3000K
• Lumens: 6615 • Voltage: 24 V • CRI: 83
Tested in accordance of IESNA publication LM-79-80
LAMPTOTAL FLUX
HLG-100-24ABOX
TYPES OF CURVEBEAM ANGLE
1 LM6615 LM67.32 W
618 x 1 x 1280C
120˚
PHOTOMETRIC
Lamp = 1 LMTotal Flux = 6615 LMHLG-100-24A = 67.32 W
Box 618 x 1 x 1280 mm
DESCRIPTION VALUE
Lamp = 1 LMTotal Flux = 6615 LMHLG-100-24A = 67.32 W
Box 618 x 1 x 1280 mm
10w w w . t l s - l e d . c o m
TECHNICAL SPECIFICATIONS
LIGHTING
TLS BOARDS
COLOR TEMPERATURE
INGRESS PROTECTION
LUMENS / SQFT
CRI
EFFICIENCY
LIFE SPAN
OPERATING TEMPERATURE
BEAM ANGLE
SINGLE SIDED, DOUBLE SIDED, 5/5, 4/5, 3/5, 2/5 AND 1/5 SEGMENTED
2700K, 3000K, 3500K, 4000K, 5600K, 6500K (OTHER CCT UPON REQUEST)
IP22 (INDOOR), IP55 (OUTDOOR)
720 LM (SS PREMIUM), 1440 LM (DS PREMIUM)
> 83 (HIGHER CRI CAN BE ORDERED)
98 LM/W
(STATIC) > 80000 HOURS, (OPTO) > 60000 HOURS
-30 ˚C TO 80 ˚C
120˚ (TLS STATIC), 175˚ (TLS OPTO)
CERTIFICATION
CETIFICATION
60 MM
75 MM (PREMIUM), 120MM (STANDARD), CUSTOM UPON REQUEST
60 MM (PREMIUM), 120MM (STANDARD), CUSTOM UPON REQUEST
571 MM (FULL BOARD), 467 MM (4/5), 345.5 MM (3/5), 225.5 MM (2/5), 105 MM (1/5)
70 GR/SQFT
LIMITLESS
DIMENSIONS & OTHER INFO
HORIZONTAL DISTANCE BETWEEN LEDs
RECOMMENDED DISTANCE BETWEEN LED TO DIFFUSER
VERTICAL DISTANCE BETWEEN LED BOARDS
LED BOARD SIZE
WEIGHT
SIZE LIMITATION
ALUMINIUM “U“ CHANNEL PROFILE
SS: FLS 2125, FLS 1114, FLS 1110-B-F, FLS 1112 / DS: FLD 1028, FLD 1115
YES
CLEAR ANODIZE OR ANY RAL (OTHER COLORS UPON REQUEST)
YES
WALL, CEILING, COLUMN, FREESTANDING OR HANGING
HARDWARE
RETROFIT
FRAME OPTIONS
CUSTOM SIZES
FINISH
COLLAPSIBLE
APPLICATION
TLS SPECIFICATIONS
ELECTRICAL
DRIVER MODELS
INPUT VOLTAGE
OUTPUT VOLTAGE
AC CABLE
BOARD POWER CONSUMPTION
APPROXIMATE SURFACE POWER CONSUMPTION
MRI ROOM APPROVED
HLG-60-24A, HLG-100-24A, HLG-150-24A, HLG-240-24A, HLG-320-24A
90-305 V AC, 47-63 HZ
21-24 V DC
HARD WIRE / PLUG
3 W (SS - 10 LED), 6 W (DS - 20 LED)
7 W / SQFT (SS PREMIUM), 14 W / SQFT (DS PREMIUM)
NON FERROUS SYSTEM