CUVETTES SPECIFICALLY FOR YOUR MAKE & MODEL
Spectrophotometer cuvettesFluorometer cuvettesCuvette accessoriesTablet dissolution & flow cellsSub-micro volume cuvettesDye laser cellsPlates & discsMicrofluidic chipsFlow channel cells
Gas cellsCustom manufacturingUV/VIS/NIR spectrophotometercalibration standardsFluorescencecalibration standardsEvacuable diesRefractometersand much more...
PRECISION QUARTZ GLASS MANUFACTURING
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TABLE OF CONTENTS
MANUFACTURING INFORMATION (OEMs)ORDERING INFORMATIONCUVETTE TECHNICAL INFORMATIONCUSTOM ITEMS
SPECTROPHOTOMETER CUVETTES
Standard CuvetteCylindrical Cuvettes Micro, Semi-Micro, and Self Masking Cuvettes Sub-Micro CuvettesUltra Micro CuvetteScrew Cap CuvettesFlow Cells/Tablet Dissolution CellsMicro and Self Masking Flow CellsWater Jacketed CuvettesAnaerobic CuvettesTandem (Divided) CuvettesDemountable CuvettesCuvettes with Quartz to Glass GradingCryogenic CuvettesTablet Dissolution Cells
1-11-21-31-41-51-61-71-81-91-101-111-121-131-141-15
7-17-2
8-18-2
9-19-29-3
2-12-22-32-42-52-62-72-82-92-102-112-12
3-13-23-33-43-5
5-15-25-35-45-5
6-16-26-36-46-56-66-7
MICROFLUIDIC CHIPS
Standard Microfluidic ChipsCustom Microfluidic Chips
OTHER ITEMS
Evacuable Dies and AccessoriesCuvette Holders for IR and FTIR InstrumentsGas Cells
FLUOROMETER CUVETTES
Standard Fluorometer CuvettesMicro and Semi-Micro Fluorometer CuvettesSub-Micro Fluorometer CuvettesScrew Cap Fluorometer CuvettesScattering Tube CellsFluorometer Flow CellsFluorometer Micro Flow CellsWater Jacketed Fluorometer CellsAnaerobic Fluorometer CuvettesTandem (Divided) Fluorometer CuvettesQuartz to Glass Grading Fluorometer CuvettesCryogenic Fluorometer Cuvettes
OTHER CUVETTES
Triangle CuvettesLiquid Chromatography & Refractometer Flow CellsDye Laser CellsLaser Absorption CellSpacers
DISPOSABLE/PLASTIC CUVETTES
UV/VIS/NIR Calibration Standards for Spectrophotometers
Photometric Accuracy & Absorbance CalibrationWavelength CalibrationStray Light CalibrationSpectral Bandwidth CalibrationCalibration KitsFluorescence Reference StandardsMicroplate Reader Test Plates
SECTION 1 SECTION 7
SECTION 8
SECTION 9
SECTION 2
SECTION 3
SECTION 4
SECTION 5
SECTION 6
INDEX BY TYPE-------- 3-------------------------- 4
------------- 5-------------------------------------- 6
------------------------------------ 76
ACCESSORIES
Covers, Stoppers, Caps, Special TopsCell MountsCases & Cell RackCuvette WashersMixers/Stirrers
FLOW CHANNEL CELLS
Standard Flow Channel CellCustom Flow Channel Cells
About our cuvettes
Each cuvette is thoroughly inspected through our meticulous quality control system, against the industry’s
highest standards. Rest assured that each cuvette you order has passed this rigorous examination.
Our staff has been supplying reputable researchers and laboratories with standard and specialized
cuvettes for many decades.
When you order from FireflySci, Inc., you are ordering from a well established, highly regarded cuvette
company. Our cuvettes are 100% guaranteed to meet your quality standards in all regards: Transmission,
assembly, matching – everything.
At FireflySci, Inc., quality is number one.
To our customers
We wish to thank you for your support, which clearly indicates
your satisfaction with our products. We hope that this new
catalog, with its many new, exciting products, will be of help in
your professional work.
All our products are guaranteed and are offered at the lowest
possible prices without compromising quality.
As one of the many scientists and professionals who now use our
products, you know that FireflySci, Inc., specializes in the design
and fabrication of the highest quality fire fused cuvettes available
on the market today. Our aim is to provide you, our customers,
with exactly the type of product your work requires.
FireflySci’s scientists, engineers, designers and shop personnel
have many years of experience in designing and fabricating
cuvettes.
If the exact cell your work requires is not included in this catalog,
please contact us. We will also fabricate non-standard cells to
your specific requirements.
Your comments and suggestions are always welcome.
Sincerely yours,
The Staff at FireflySci, Inc.
Information for manufacturers
The FireflySci factory, has since become well known for its high
quality silica glass products, ranging from raw materials to high
precision final products. FireflySci has been recognized as a leader
in the silica industry for its accumulated abilities, established and
innovative technology, and superior quality. We have built reputable
quality assurance systems to meet the high standards of our
customers, and thusly acquired ISO9001 certification, as well as
other domestic quality assurance certifications.
Manufacturers throughout analytical and diagnostic industries,
demanding a reliable and technically aggressive silica glass
company, have turned to FireflySci for their silica glass components.
Technology innovation and superior quality, combined with excellent
service, continues to be the foundation of our philosophy.
Our precision and dedication to quality has allowed us to serve
large, world class instrument manufacturers with high caliber optical
components for decades.
To see what FireflySci, Inc., can do for your company,
please call +1-347-441-4277
3
Contact Us / Customer Service
We can easily be reached for placing orders, requesting quotations, technical inquiries, customer service, and any other comments or questions you might have.
Mailing Address:
1014 E. 21st Street, Suite ABrooklyn, NY 11210 USA
We can be reached via phone during the following hours: Monday through Friday, 9:00am - 5:00pm New York time
Ordering Information
Payment:We accept Visa, MasterCard, and American Express. Please provide number, expiration date, name on card, billing address, and CID number.
We also offer Net 30 Days to established accounts. For an account with us, please send us 4 credit references. We can ship your orders via Net 30 Days once your references have been verified.
Special payment terms apply to international customers. Please inquire.
All prices are FOB/EXW Brooklyn, NY
Shipment, within the USA and Canada:Our standard mode of shipment is UPS Ground (or UPS Standard to Canada). 1 Day, 2 Day, and 3 Day are also available. Collect shipments to a UPS, TNT, or FedEx account are also available. Collect shipments are shipped insured unless otherwise specified. Terms are FOB Brooklyn, New York.
Shipment, outside the USA and Canada:Our standard mode of shipment depends on the destination country. We source from a number of carriers to find you the least expensive rates and most reliable service. Standard terms are FCA Brooklyn, New York.
Return policy:Customers may return cuvettes for refund, exchange, or credit. Returns due to FireflySci error are completely refundable, including shipping.
If items are being returned due to customer error, refund, exchange, or credit can only be issued upon receipt and inspection of cuvettes. The items must be unused to be accepted.
Used cuvettes can also be returned. In these cases, no refund, exchange, or credit is issued until the cuvette has gone through our QC and cleaning departments, at which time a fee is calculated based on the contamination of the cuvette. In some cases, no refund, exchange, nor credit can be provided, and the cuvettes will be shipped back to you as is. Otherwise, a partial credit is applied.
Due to a low volume of returns, no RMA# Is necessary. Please call ahead before you mail the items back.
4
Cuvette Technical Information
Material Information
All the cuvettes you order are automatically shipped in optically
matched sets. If you want to purchase a new cuvette to match an
older one, please let us know.
Also regarding our materials, the following information is available:
● Black quartz information
● Purity
● Chemical compatibility
● Thermal properties
● Fluorescence, refractive index, and other optical qualities
Light Path, Tolerances, and Other Specifications
Regarding general specifications, please note that each part number
has its own tolerances. We can also provide information regarding
window flatness, polish, and parallelism. Please contact us for this,
as well as additional material data listed above.
Frequently Asked Questions
Q: I have a specific instrument, and I need to make sure the
cuvettes in this catalog are compatible…
A: The cuvettes in this catalog are guaranteed to work in a myriad
of different instruments. Call or email to request a conversion chart
between the part numbers of your instruments’ cuvettes and our
cuvettes.
Q: Is AR coating available?
A. Yes. Please contact us and provide the following information:
1. What P/N do you need coated?
If it is a custom item, please see page 7.
2. What wavelength are you working in?
3. What is your target percentage of transmission?
For example, “98% at 350nm.”
4. What quantity of the above P/N do you need coated?
Q: Do you manufacture cells for Circular Dichroism (CD)?
A: Yes. Please contact us, and let us know if you need a rectangular
or circular cuvettes for your application. We will recommend
certain parts to you, and provide more information regarding our
cuvettes for CD applications.
Q: What is the Z-dimension (Zd) or Center Height?
A: The Z-dimension is the height from the bottom of the cuvette to the center of its sample chamber.
In cases where the cuvette’s polished window is very small (where usually the entire cuvette is black
aside from the aperture window), the Z-dimension of the cuvette should be the same as the height of
the instrument’s light beam.
The Z-dimension is usually 8.5 or 15mm, depending on your instrument’s manufacturer.
Only certain cuvettes depend on the correct Z-dimension to be used.
These cuvettes have Z-dimension (Zd) information provided in their data table.
Usable Range & Matching Tolerances
MATERIAL ABBREVIATION USABLE RANGE MATCHING TOLERANCE
Optical Glass
UV Quartz
IR Quartz
Pyrex Glass
Sapphire
340 - 2,500nm
190 - 2,500nm
220 - 3,500nm
320 - 2,500nm
250 - 5,000nm
1% at 350nm
1% at 220nm
1% at 2,730nm
G
UV
IR
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
5
Cuvette Technical Information
Cleaning and Handling
Cuvettes must be scrupulously clean. Optical surfaces should not be touched as oil smudges are difficult to
remove. Purity of solvents used for sample and cleaning is important. Only distilled water or spectrophotometric
grade solvents should be used to avoid contamination from impure solvents. As soon as possible after use,
cuvettes should be rinsed and soaked in distilled water.
For cleaning, use a mild detergent solution containing no lanolin, oils, or insoluble matter. To remove stubborn
contaminants, cuvettes can be soaked for a few minutes in mild sulfuric acid. Never allow cuvettes to soak in
hot concentrated acids, alkalis, or other agents which may etch the polished optical surfaces. After cleaning
with detergent and/or acid, cuvettes should be thoroughly rinsed with distilled water. Avoid blowing the cuvette
with air to dry them. It is better to speed evaporation by means of suction.
Please see page 33 for cuvette cleaners.
Please contact us if you need any further cleaning information.
Custom Designs
In order to manufacture your custom quartz glass part, we need the following information:
1. Material (Glass, or other (please specify))
2. All relevant dimensions and dimension tolerances.
If you do not provide tolerances, our standard tolerances will be used.*
3. All critical tolerances and critical areas.*
4. Which surfaces to be polished.
5. Please fax or email a sketch. A rough drawing is also fine.
6. Application information.
7. Quantities you need a quotation for.
8. Deadline for quotation and/or manufacturing, if applicable.
*We cannot be responsible for any dimensions not explicitly provided by the customer.
P65Dcuvette washer
page 50
6
7 [email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
Spectrophotometer Cuvettes 1-1 Standard Cuvettes
TYPE 1
TYPE 5
TYPE 11
Standard cuvette with PTFE cover● Two windows polished
Standard cuvette with PTFE cover, rounded corners● Two windows polished
Standard cuvette with quartz cap● Two windows polished
Polished = Optical polishing
L/P = Light Path
1
Outer Dimensions (mm)
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH
LENGTH WIDTH
G UV IR
G UV
G UV IR
CAPACITY(ml)
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
Material & Part Numbers
0.5
1
2
5
10
20
30
40
50
100
10
5
10
40
50
3.0
3.5
4.5
7.5
12.5
22.5
32.5
42.5
52.5
102.5
12.5
7.5
12.5
42.5
52.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
45.5
45.5
45.5
45.5
45.5
45.5
45.5
45.5
45.5
45.5
45.0
55.5
55.5
55.5
55.5
0.5
1.0
2.0
5.0
10.0
20.0
30.0
40.0
50.0
100.0
10.0
5.0
10.0
40.0
50.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
0.220
0.400
0.700
1.700
3.500
7.000
10.500
14.000
17.500
35.000
3.500
1.700
3.500
14.000
17.500
-
1G1
1G2
1G5
1G10
1G20
1G30
1G40
1G50
1G100
1UV0.5
1UV1
1UV2
1UV5
1UV10
1UV20
1UV30
1UV40
1UV50
1UV100
1IR0.5
1IR1
1IR2
1IR5
1IR10
1IR20
1IR30
1IR40
1IR50
1IR100
5UV10
11UV5
11UV10
11UV40
11UV50
11IR5
11IR10
11IR40
11IR50
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
5G10
11G5
11G10
11G40
11G50
[email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
Spectrophotometer Cuvettes1-1 Standard Cuvettes 1
TYPE 21
Standard cuvette with PTFE stopper● Two windows polished
TYPE 31
TYPE 508
TYPE 509
Standard cuvette with quartz stopper● Two windows polished
Tall cuvette with PTFE cover● Two windows polished
Tall cuvette with PTFE cover● Two windows polished
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH G UV IRCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
0.5
1
2
5
10
20
30
40
50
100
3.0
3.5
4.5
7.5
12.5
22.5
32.5
42.5
52.5
102.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
55.5
55.5
55.5
55.5
55.5
55.5
55.5
55.5
55.5
55.5
0.5
1.0
2.0
5.0
10.0
20.0
30.0
40.0
50.0
50.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
0.220
0.400
0.700
1.700
3.500
7.000
10.500
14.000
17.500
35.500
21G1
21G1
21G2
21G5
21G10
21G20
21G30
21G40
21G50
21G50
21UV1
21UV1
21UV2
21UV5
21UV10
21UV20
21UV30
21UV40
21UV50
21UV50
21IR1
21IR1
21IR2
21IR5
21IR10
21IR20
21IR30
21IR40
21IR50
21IR50
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
Outer Dimensions (mm)
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH
LENGTH WIDTH
UV IR
G UV
G UV
CAPACITY(ml)
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
Material & Part Numbers
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
52.0
65.0
100
10.0
10.0
10.0
10.0
10.0
10.0
3.500
5.500
10
31IR10
508UV10
509UV10
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________509G10
508G10
31UV10
9 [email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
TYPE 523
Rectangular absorption cuvette ● Two windows polished
See also Type-37 for a cylindrical cuvette with quartz to glass graded seal tube, page 18.
Spectrophotometer Cuvettes 1-1 Standard Cuvettes
1-2 Cylindrical Cuvettes
1
TYPE 32
TYPE 34
TYPE 35
Cylindrical cuvette with PTFE stopper● Two windows polished
Cylindrical cuvette with 2 PTFE stoppers● Two windows polished
Large diameter cylindrical cuvette with PTFE stopper● Two windows polished
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH GCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
10 13.5 35.0 35.0 10.0 31.5 8.800 523G10_____________________________________________________________________________________________________
Outer Dimensions (mm)
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
L/P(mm)
LENGTH DIAMETER HEIGHT
LENGTH DIAMETER HEIGHT
LENGTH DIAMETER HEIGHT
LENGTH DIAMETER
LENGTH DIAMETER
LENGTH DIAMETER
G UV IR
G UV IR
G UV IR
CAPACITY(ml)
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
Material & Part Numbers
1
2
5
10
20
50
100
200
10
20
50
100
3.5
4.5
7.5
12.5
22.5
52.5
102.5
202.5
12.5
22.5
52.5
102.5
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
50.0
50.0
50.0
50.0
30.0
30.0
30.0
30.0
30.0
35.5
35.5
35.5
58.0
58.0
58.0
58.0
1.0
2.0
5.0
10.0
20.0
50.0
100.0
200.0
10.0
20.0
50.0
100.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
47.0
47.0
47.0
47.0
0.280
0.560
1.400
2.800
5.600
14.000
28.000
56.000
17.000
34.000
85.000
170.000
32UV1
32UV2
32UV5
32UV10
32UV20
34UV50
34UV100
34UV200
35UV10
35UV20
35UV50
35UV100
32IR1
32IR2
32IR5
32IR10
32IR20
34IR50
34IR100
34IR200
35IR10
35IR20
35IR50
35IR100
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
35G10
35G20
35G50
35G100
34G50
34G100
34G200
32G1
32G2
32G5
32G10
32G20
[email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
Spectrophotometer Cuvettes1-2 Cylindrical Cuvettes 1
TYPE 36
Short path length cylindrical cuvette with PTFE stopper● Two windows polished
TYPE 521
TYPE 522
Long cylindrical cuvette with PTFE stopper● Two windows polished
Cylindrical absorption cuvette with quartz cover● Two windows polished
Outer Dimensions (mm)
L/P(mm) LENGTH DIAMETER HEIGHT LENGTH DIAMETER UV IRCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
0.05
0.1
0.2
0.5
1
2
5
23.0
23.0
23.0
23.0
23.0
23.0
23.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
32.0
32.0
32.0
32.0
32.0
32.0
32.0
0.05
0.10
0.20
0.50
1.00
2.00
5.00
13.0
13.0
13.0
13.0
13.0
13.0
13.0
2.150
2.150
2.180
2.220
2.310
2.490
3.020
36UV0.05
36UV0.1
36UV0.2
36UV0.5
36UV1
36UV2
36UV5
36IR0.05
36IR0.1
36IR0.2
36IR0.5
36IR1
36IR2
36IR5
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH DIAMETER HEIGHT
LENGTH DIAMETER HEIGHT
LENGTH DIAMETER
LENGTH DIAMETER
G UV
UV IR
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
100
10
102.5
12.5
10.0
35.0
20.0
31.5
100.00
10.00
8.0
31.0
5.000
7.000
521UV100
522IR10
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________522UV10
521G100
11 [email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
TYPE 9M
Self masking semi-micro cuvette with PTFE cover● Two windows polished ● Base thickness is 3mm
TYPE 9B
TYPE 9BM
Variable capacity micro/semi-micro cuvette with PTFE cover● Two windows polished ● Capacity changes based on inside width
● Base thickness is 9mm ● No black masking
Variable capacity self masking micro/semi-micro cuvette with PTFE cover● Two windows polished ● Capacity changes based on inside width ● Base thickness is 9mm
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH G UV IRCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
5
10
20
40
50
100
7.5
12.5
22.5
42.5
52.5
102.5
12.5
12.5
12.5
12.5
12.5
12.5
45.0
45.0
45.0
45.0
45.0
45.0
5.0
10.0
20.0
40.0
50.0
100.0
4.0
4.0
4.0
4.0
4.0
4.0
0.700
1.400
2.800
5.600
7.000
14.000
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH
UV IR
UV IR
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
10
10
10
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
45.0
45.0
45.0
45.0
45.0
45.0
10.0
10.0
10.0
10.0
10.0
10.0
1.0
3.0
5.0
1.0
3.0
5.0
0.4
1.1
1.8
0.4
1.1
1.8
9BIR10X1
9BIR10X3
9BIR10X5
9BMIR10X1
9BMIR10X3
9BMIR10X5
__________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________
9MG5
9MG10
9MG20
9MG40
9MG50
9MG100
9MUV5
9MUV10
9MUV20
9MUV40
9MUV50
9MUV100
9MIR5
9MIR10
9MIR20
9MIR40
9MIR50
9MIR100
9BMUV10X1
9BMUV10X3
9BMUV10X5
9BUV10X1
9BUV10X3
9BUV10X5
TYPE 9
Semi-Micro Cuvette with PTFE cover● Two windows polished ● Base thickness is 3mm
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH G UV IRCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
5
10
20
30
40
50
100
7.5
12.5
22.5
32.5
42.5
52.5
102.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
45.0
45.0
45.0
45.0
45.0
45.0
45.0
5.0
10.0
20.0
30.0
40.0
50.0
100.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
0.700
1.400
2.800
4.200
5.600
7.000
14.000
9UV5
9UV10
9UV20
9UV30
9UV40
9UV50
9UV100
9IR5
9IR10
9IR20
9IR30
9IR40
9IR50
9IR100
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
9G5
9G10
9G20
9G30
9G40
9G50
9G100
Spectrophotometer Cuvettes1 1-3 Micro, Semi-Micro, and Self Masking Cuvettes
[email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
TYPE 29BM
Semi-Micro Cuvette with PTFE cover● Two windows polished
● Base thickness is 9mm
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH UV IRCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
5
10
20
30
40
7.5
12.5
22.5
32.5
42.5
12.5
12.5
12.5
12.5
12.5
49.0
49.0
49.0
49.0
49.0
5.0
10.0
20.0
30.0
40.0
4.0
4.0
4.0
4.0
4.0
0.600
1.200
2.400
3.600
4.800
29BMIR5
29BMIR10
29BMIR20
29BMIR30
29BMIR40
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
TYPE 29
TYPE 29M
Semi-micro cuvette with PTFE stopper● Two windows polished
● Base thickness is 3mm
Self masking semi-micro cuvette with PTFE stopper● Two windows polished
● Base thickness is 3mm
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH
G UV IR
G UV IR
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
5
10
20
30
40
50
5
10
20
40
50
7.5
12.5
22.5
32.5
42.5
52.5
7.5
12.5
22.5
42.5
52.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
49.0
49.0
49.0
49.0
49.0
49.0
49.0
49.0
49.0
49.0
49.0
5.0
10.0
20.0
30.0
40.0
50.0
5.0
10.0
20.0
40.0
50.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
0.700
1.400
2.800
4.200
5.600
7.000
0.700
1.400
2.800
5.600
7.000
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
29G5
29G10
29G20
29G30
29G40
29G50
29MG5
29MG10
29MG20
29MG40
29MG50
29UV5
29UV10
29UV20
29UV30
29UV40
29UV50
29MUV5
29MUV10
29MUV20
29MUV40
29MUV50
29IR5
29IR10
29IR20
29IR30
29IR40
29IR50
29MIR5
29MIR10
29MIR20
29MIR40
29MIR50
29BMUV5
29BMUV10
29BMUV20
29BMUV30
29BMUV40
Spectrophotometer Cuvettes 11-3 Micro, Semi-Micro, and Self Masking Cuvettes
13 [email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
TYPE 8
Multi-Micro Cell Array ● 8-chambered multi-micro array of cells for doing multiple measurements.
● Typically used in Shimadzu machines.
TYPE 16
TYPE 17
TYPE 17M
Multi-Micro Cell Array ● 16-chambered multi-micro array of cells for doing multiple measurements.
Short micro cuvette with PTFE cover● Two windows polished ● Base thickness is 3mm ● Height is 25mm
Self masking short micro cuvette with PTFE cover● Two windows polished ● Base thickness is 3mm ● Height is 25mm
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH UVCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
10mm 12.5mm 74.5mm 9.0mm 10.0 10.0 0.120 8UV10_____________________________________________________________________________________________________
Outer Dimensions (mm)
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH
LENGTH WIDTH
UV
G UV IR
G UV IR
CAPACITY(ml)
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
Material & Part Numbers
5
10
5
10
20
30
40
50
5
10
20
30
40
50
12.5
12.5
7.5
12.5
22.5
32.5
42.5
52.5
7.5
12.5
22.5
32.5
42.5
52.5
74.5
74.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
9.0
9.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
25.0
5.0
10.0
5.0
10.0
20.0
30.0
40.0
50.0
5.0
10.0
20.0
30.0
40.0
50.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0.50
0.100
16UV5
16UV10
0.200
0.400
0.800
1.200
1.600
2.000
0.200
0.400
0.800
1.200
1.600
2.000
17UV5
17UV10
17UV20
17UV30
17UV40
17UV50
17MUV5
17MUV10
17MUV20
17MUV30
17MUV40
17MUV50
17IR5
17IR10
17IR20
17IR30
17IR40
17IR50
17MIR5
17MIR10
17MIR20
17MIR30
17MIR40
17MIR50
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
17G5
17G10
17G20
17G30
17G40
17G50
17MG5
17MG10
17MG20
17MG30
17MG40
17MG50
Spectrophotometer Cuvettes1 1-3 Micro, Semi-Micro, and Self Masking Cuvettes
[email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
TYPE 18B
TYPE 18BM
Bottom raised micro cuvette with PTFE cover● Two windows polished ● Base thickness is 9mm ● No black masking
Bottom raised self masking micro cuvette with PTFE cover● Two windows polished ● Base thickness is 9mm
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH
UV IR
UV IR
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
5
10
20
40
50
5
10
20
7.5
12.5
22.5
42.5
52.5
7.5
12.5
22.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
5.0
10.0
20.0
40.0
50.0
5.0
10.0
20.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0.280
0.560
1.120
2.240
2.800
0.280
0.560
1.120
18BIR5
18BIR10
18BIR20
18BIR40
18BIR50
18BMIR5
18BMIR10
18BMIR20
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
TYPE 18
TYPE 18M
Micro cuvette with PTFE cover● Two windows polished ● Base thickness is 3mm
Self masking micro-cuvette with PTFE cover● Two windows polished ● Base thickness is 3mm
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH
G UV IR
G UV IR
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
5
10
20
30
40
50
100
5
10
20
40
50
7.5
12.5
22.5
32.5
42.5
52.5
102.5
7.5
12.5
22.5
42.5
52.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
5.0
10.0
20.0
30.0
40.0
50.0
100.0
5.0
10.0
20.0
40.0
50.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0.350
0.700
1.400
2.100
2.800
3.500
7.000
0.350
0.700
1.400
2.800
3.500
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
18G5
18G10
18G20
18G30
18G40
18G50
18G100
18MG5
18MG10
18MG20
18MG40
18MG50
18UV5
18UV10
18UV20
18UV30
18UV40
18UV50
18UV100
18MUV5
18MUV10
18MUV20
18MUV40
18MUV50
18IR5
18IR10
18IR20
18IR30
18IR40
18IR50
18IR100
18MIR5
18MIR10
18MIR20
18MIR40
18MIR50
18BUV5
18BUV10
18BUV20
18BUV40
18BUV50
18BMUV5
18BMUV10
18BMUV20
Spectrophotometer Cuvettes 11-3 Micro, Semi-Micro, and Self Masking Cuvettes
15 [email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
TYPE 30
Micro cuvette with PTFE stopper● Two windows polished ● Base thickness is 3mm
TYPE 30M
TYPE 30BM
TYPE 520M
Self masking micro cuvette with PTFE stopper● Two windows polished ● Base thickness is 3mm
Bottom raised self masking micro cuvette with PTFE stopper● Two windows polished ● Base thickness is 9mm
Short self masking micro cuvette with PTFE stopper● Two windows polished ● Base thickness is 3mm
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH G UV IRCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
1
2
5
10
30
40
50
3.5
4.5
7.5
12.5
32.5
42.5
52.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
49.0
49.0
49.0
49.0
49.0
49.0
49.0
1.0
2.0
5.0
10.0
30.0
40.0
50.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0.070
0.140
0.350
0.700
2.100
2.800
3.500
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
Outer Dimensions (mm)
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH
LENGTH WIDTH
G UV IR
UV IR
UV IR
CAPACITY(ml)
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
Material & Part Numbers
5
10
20
40
5
10
20
5
10
20
7.5
12.5
22.5
42.5
7.5
12.5
22.5
7.5
12.5
22.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
49.0
49.0
49.0
49.0
49.0
49.0
49.0
29.0
29.0
29.0
5.0
10.0
20.0
40.0
5.0
10.0
20.0
5.0
10.0
20.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0.350
0.700
1.400
2.800
0.300
0.600
1.200
0.200
0.400
0.800
30MUV5
30MUV10
30MUV20
30MUV40
30MIR5
30MIR10
30MIR20
30MIR40
30BMIR5
30BMIR10
30BMIR20
520MIR5
520MIR10
520MIR20
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
30G1
30G2
30G5
30G10
30G30
30G40
30G50
30UV1
30UV2
30UV5
30UV10
30UV30
30UV40
30UV50
30IR1
30IR2
30IR5
30IR10
30IR30
30IR40
30IR50
30BMUV5
30BMUV10
30BMUV20
520MUV5
520MUV10
520MUV20
30MG5
30MG10
30MG20
30MG40
Spectrophotometer Cuvettes1 1-3 Micro, Semi-Micro, and Self Masking Cuvettes
[email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
1-5 Ultra Micro Cuvette
Spectrophotometer Cuvettes 11-4 Sub-Micro Cuvettes
Micro Focus CellUltra-micro low volume cell with a 1.9µl capacity
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH UVCAPACITY
(μl)ZD
(mm)
Chamber Dimensions (mm) Material &Part Numbers
1 12.5 12.5 45.0 1.0 1.98.5- 20.0_____________________________________________________________________________________________________MFC-1
INCLUDED IN THE KIT IS THE FOLLOWING:
• A 12.5x12.5mm micro focus adapter that fits into any spectrophotometer. • Cleaning swabs.
• A UV Quartz micro tray to inject a sample in. • Instructions.
• Spacers to adjust the micro focus adapter to the proper Z-Dimension in your spectrophotometer.
HERE IS A BASIC GUIDE TO USING THE MICRO FOCUS CELL CONVERSION KIT:
1. To use the conversion kit all you have to do is check the Z-dimension of your machine.
The Z-Dimension of the Micro Focus adapter is 8.5 mm so if you have a machine with an 8.5 or 20mm z-dimension
you’ll need to use the appropriate spacer.
2. Next insert the Micro Focus Adapter into the spectrophotometer. Pull out the UV Quartz micro chamber.
The micro chamber is a 1 mm lightpath cuvette that holds a sample of 1.9µl.
3. Inject your sample into the quartz chamber and insert this into the Micro Focus Adapter.
4. Run your experiment.
5. Celebrate how easy that was to do and how much money you saved.
APPLICATIONS FOR THE MICRO FOCUS CELL:
• DNA Measurement
• RNA Measurement
• DNA Quantification
• Nucleic Acid Analysis
• Protein Concentration
• All small volume applications (0.3-1.9µl)
• Only the Micro Focus Cell can offer these guarantees:
• Quick: Load and empty your sample into the cell without
even removing it from the machine.
This equals consistent alignment through multiple tests.
• Guaranteed to work in your spectrophotometer (any Z
dimension/center height is compatible) Leak proof design.
Our job is design and manufacture the most innovative and
quality cuvettes. Your job is to use them and change the
world: 0.1µl at a time. Let us know how else we can help.
TYPE 701M
Sub-micro self masking cuvette with PTFE threaded stopper● Two windows polished
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH HEIGHT UVCAPACITY
(μl)ZD
(mm)
Chamber Dimensions (mm) Material &Part Numbers
10
10
10
10
10
10
10
10
10
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
10
10
10
10
10
10
10
10
10
10
10
10
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
1.0
1.0
2.5
2.5
5.0
5.0
8.0
8.0
8.0
8.0
8.0
8.0
10
10
10
50
50
50
100
100
100
160
160
160
8.5
15.0
20.0
8.5
15.0
20.0
8.5
15.0
20.0
8.5
15.0
20.0
_______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
701MUV10.10A
701MUV10.10B
701MUV10.10C
701MUV10.50A
701MUV10.50B
701MUV10.50C
701MUV10.100A
701MUV10.100B
701MUV10.100C
701MUV10.160A
701MUV10.160B
701MUV10.160C
17 [email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
TYPE 46
Variable capacity micro/semi-micro cuvette with screw cap● Two windows polished ● Each cap contains a PTFE septa seal
● Height includes threading, but not screw cap ● Suitable for anaerobic work
● Cuvette comes with both open and closed screw caps ● Base thickness is 3mm
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH UVCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
10
10
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
55.0
55.0
55.0
55.0
55.0
10.0
10.0
10.0
10.0
10.0
1.0
2.0
3.0
4.0
5.0
0.350
0.700
1.050
1.400
1.750
46UV10X1
46UV10X2
46UV10X3
46UV10X4
46UV10X5
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
TYPE 41
TYPE 34S
Standard cuvette with screw cap● Two windows polished ● Each cap contains a PTFE septa seal
● Height includes threading, but not screw cap ● Suitable for anaerobic work
● Cuvette comes with both open and closed screw caps
Large Cylindrical Polarimeter Cell with Screw Caps ● Includes 2 SC2 open screw caps and two SC1 closed screw caps
SCREW CAP OD: 16mm
SEPTA: Diameter: 11mm
Thickness: 3.5mm
THREADING ID: 8mm
THREADING OD: 12mm
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH HEIGHT DIAMETER
LENGTH WIDTH
DIAMETER LENGTH
G UV
UV
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
1
2
5
10
50
100
50
100
3.5
4.5
7.5
12.5
52.5
102.5
52.5
102.5
12.5
12.5
12.5
12.5
12.5
12.5
35.5
35.5
55.0
55.0
55.0
55.0
55.0
55.0
22.0
22.0
1.0
2.0
5.0
10.0
50.0
100.0
19.0
19.0
10.0
10.0
10.0
10.0
10.0
10.0
50.0
100.0
0.400
0.700
1.700
3.500
17.500
35.000
14.000
28.000
-
-
41G5
41G10
41G50
41G100
41UV1
41UV2
41UV5
41UV10
41UV50
41UV100
34SUV50
34SUV100
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
SCREW CAP OD: 16mm
SEPTA: Diameter: 11mm
Thickness: 3.5mm
THREADING ID: 8mm
THREADING OD: 12mm
Spectrophotometer Cuvettes 1-6 Screw Cap Cuvettes1
[email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
Spectrophotometer Cuvettes 11-7 Flow Cells/TD (Tablet Dissolution) Cells
TYPE 44
TYPE 45
TYPE 58
TYPE 48
Flow cell with detachable inlet/outlet tubes, 1.6ml● Two windows polished ● Inlet/outlet tubes: OD4 x ID2mm
● Height is without tubes ● Tubes are made of quartz
Flow cell with detachable inlet/outlet tubes, 2.8ml● Two windows polished ● Inlet/outlet tubes: OD4 x ID2mm
● Height is without tubes ● Tubes are made of quartz
Flow-through cell with top tubes● Two windows polished ● Inlet/outlet tubes: OD4 x ID2 x L10mm
● Height is without tubes ● Tubes are made of quartz
Flow-through cuvette with side tubes● Two windows polished ● Inlet/outlet tubes: OD5 x ID3 x L15mm
● Length is without tubes ● Tubes are made of quartz
Outer Dimensions (mm)
Outer Dimensions (mm)
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
UV IR
UV IR
UV IR
UV IR
CAPACITY(ml)
CAPACITY(ml)
CAPACITY(ml)
CAPACITY(ml)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
Material & Part Numbers
Material & Part Numbers
10
10
10
0.05
0.1
0.5
1
2
5
10
12.5
12.5
12.5
2.6
2.6
3.0
3.5
4.5
7.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
50.0
50.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
10.0
10.0
10.0
0.05
0.1
0.5
1.0
2.0
5.0
10.0
4.0
7.0
7.0
9.0
9.0
9.0
9.0
9.0
9.0
9.0
40.0
40.0
36.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
1.600
2.800
2.520
0.015
0.030
0.150
0.300
0.600
1.500
3.000
44IR10
45IR10
58IR10
48IR0.05
48IR0.1
48IR0.5
48IR1
48IR2
48IR5
48IR10
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
44UV10
45UV10
58UV10
48UV0.05
48UV0.1
48UV0.5
48UV1
48UV2
48UV5
48UV10
19 [email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
Spectrophotometer Cuvettes 1-7 Flow Cells/TD (Tablet Dissolution) Cells1
TYPE 501
Flow-through cell with top and bottom tubes● Two windows polished ● Inlet/outlet tubes: OD5 x ID3 x L10mm
● Height is without tubes ● Tubes are made of quartz
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH HEIGHT UV IRCAPACITY
(ml)
Chamber Dimensions (mm) Material & Part Numbers
5
10
12.5
12.5
12.5
12.5
65.0
45.0
5.0
10.0
10.0
10.0
35.0
33.0
1.850
3.300
501IR5
501UV10_____________________________________________________________________________________________________501UV5
501UV10
1-8 Micro & Self Masking Flow Cells
TYPE 74
TYPE 513M
TYPE 59M
Micro flow through cell, 2mm L/P● Two windows polished ● PTFE inlet/outlet tubes: OD2 x ID1mm
● Height is without tubes
Micro flow through cell, 2mm L/P● Two windows polished ● PTFE inlet/outlet tubes: OD4 x ID2mm
● Height is without tubes
Self masking micro flow cell● Two windows polished ● Inlet/outlet tubes: OD3 x ID1.5 x L8mm
● Height is without tubes ● Tubes are made of quartz
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH HEIGHT UV IRCAPACITY
(ml)
Chamber Dimensions (mm) Material & Part Numbers
2 3.0 3.0 7.6 2.0 2.0 7.6 0.030 74IR2_____________________________________________________________________________________________________74UV2
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH HEIGHT
UV IR
UV IR
CAPACITY(ml)
CAPACITY(ml)
ZD(mm)
ZD(mm)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Material &Part Numbers
Material &Part Numbers
10
10
12.5
12.5
12.5
12.5
38.0
45.0
10.0
10.0
3.0
11.04.0
0.070
0.440
8.5
15.0
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
513MUV10
59MUV10
513MIR10
59MIR10
[email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
Spectrophotometer Cuvettes1-8 Micro & Self Masking Flow Cells 1
TYPE 500M
Fully masked ultra-micro flow cell with cylindrical chamber● Two windows polished ● Inlet/outlet tubes: OD2 x ID1 x L5mm
● Height is without inlet/outlet tubes
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH UV IRCAPACITY
(ml)ZD
(mm)
Chamber Dimensions (mm) Material &Part Numbers
10 12.5 12.5 38.0 10.0 3.0 0.0708.5_____________________________________________________________________________________________________500MUV10 500MIR10
1-9 Water Jacketed Cuvettes
TYPE 50
TYPE 51H
TYPE 51V
Water jacketed cylindrical cuvette with PTFE stopper● Two windows polished ● Tubes to water jacket: OD5 x ID3 x L25mm
● Height is without inlet/outlet tubes
Water jacketed cuvette with horizontal tubes● Two windows polished ● Tubes to water jacket: OD4 x ID2 x L12.5mm
● Width is without tubes
Water jacketed cuvette with vertical tubes● Two windows polished ● Tubes to water jacket: OD4 x ID2 x L12.5mm
● Height is without tubes
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH UV IRCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
5
10
50
7.5
12.5
52.5
23.0
23.0
23.0
32.0
32.0
32.0
5.0
10.0
50.0
13.0
13.0
13.0
0.660
1.320
6.600
50IR5
50IR10
50IR50
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
50UV5
50UV10
50UV50
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
UV IR
UV IR
CAPACITY(ml)
CAPACITY(ml)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
10
10
12.5
12.5
12.5
12.5
50.0
50.0
10.0
10.0
4.0
4.0
45.0
45.0
1.500
1.500
51HIR10
51VIR10
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
51HUV10
51VUV10
21 [email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
Spectrophotometer Cuvettes 1-9 Water Jacketed Cuvettes1
TYPE 53
TYPE 54
Water jacketed cuvette with PTFE stopper, 2.4ml● Two windows polished ● Tubes to water jacket: OD4 x ID2 x L12.5mm
● Width is without tubes ● Height is without stopper
Water jacketed cuvette with PTFE stopper, 1.2ml● Two windows polished ● Tubes to water jacket: OD4 x ID2 x L10mm
● Length is without tubes ● Height is without stopper
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
UV IR
UV IR
CAPACITY(ml)
CAPACITY(ml)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
10
10
12.5
12.5
12.5
12.5
50.0
48.0
10.0
10.0
4.0
4.0
42.0
36.0
1.400
1.200
53IR10
54IR10
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
53UV10
54UV10
1-10 Anaerobic Cuvettes
TYPE 26
TYPE 28
Short anaerobic cuvette with glass pouch● Two windows polished ● Overall height is approximately 65mm
● Height is without glass pouch
Standard anaerobic cuvette with glass pouch● Two windows polished ● Overall height is approximately 125mm
● Height is without glass pouch
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
UV IR
UV IR
CAPACITY(ml)
CAPACITY(ml)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
2
5
10
2
5
10
4.5
7.5
12.5
4.5
7.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
45.0
45.0
45.0
84.0
84.0
84.0
2.0
5.0
10.0
2.0
5.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
30.5
30.5
30.5
44.0
44.0
44.0
0.500
1.250
2.500
0.700
1.750
3.500
26IR2
26IR5
26IR10
28IR2
28IR5
28IR10
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
26UV2
26UV5
26UV10
28UV2
28UV5
28UV10
[email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
Spectrophotometer Cuvettes1-10 Anaerobic Cuvettes 1
TYPE 71
Bubble forming anaerobic cuvette with glass pouch● Two windows polished ● Overall height is approximately 102mm
● Height is without glass pouch
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH HEIGHT UV IRCAPACITY
(ml)
Chamber Dimensions (mm) Material & Part Numbers
10 12.5 12.5 76.5 10 10 45.0 3.500 71IR10_____________________________________________________________________________________________________71UV10
1-11 Tandem (Divided) Cuvettes
1-12 Demountable Cuvettes
TYPE 25A
Tandem cuvette● Two windows & partition polished
● Height of partition is approximately 37mm
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH UV IRCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
10 12.5 12.5 45.0 2x4.5 10 2 x 1.300_____________________________________________________________________________________________________25AUV10 25AIR10
TYPE 19
U-demountable cuvette with removable window● Two windows polished
Outer Dimensions (mm)
L/P(mm) LENGTH WIDTH HEIGHT LENGTH WIDTH HEIGHT UV IRCAPACITY
(ml)
Chamber Dimensions (mm) Material & Part Numbers
0.05
0.1
0.2
0.5
1
2
2.55
2.6
2.7
3.0
3.5
4.5
12.5
12.5
12.5
12.5
12.5
12.5
45.0
45.0
45.0
45.0
45.0
45.0
0.05
0.1
0.2
0.5
1.0
2.0
10.0
10.0
10.0
10.0
10.0
10.0
41.5
41.5
41.5
41.5
41.5
41.5
0.020
0.040
0.080
0.200
0.400
0.720
19IR0.05
19IR0.1
19IR0.2
19IR0.5
19IR1
19IR2
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
19UV0.05
19UV0.1
19UV0.2
19UV0.5
19UV1
19UV2
*A20 cell mount not included. See page 48
23 [email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
TYPE 20
TYPE 42
TYPE 49
O-demountable cuvette with removable window● Two windows polished
Demountable Disc Circular Dichroism Cuvette● Two windows optically polished
● Disc-shaped demountable spectrophotometer cuvette with removable window
O-demountable cuvette with removable window● Two windows polished ● Inlet/outlet tubes: OD5 x ID3 x L15mm
● Tubes are made of quartz ● Outside length does not include tubes
Outer Dimensions (mm)
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
WIDTH
LENGTH WIDTH HEIGHT
UV IR
UV
UV IR
CAPACITY(ml)
CAPACITY(ml)
CAPACITY(ml)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
Material & Part Numbers
0.05
0.1
0.2
0.5
1
2
0.1
0.2
0.5
1
2
0.1
0.2
0.5
1
2
2.55
2.6
2.7
3.0
3.5
4.5
2.6
2.7
3.0
3.5
4.5
2.6
2.7
3.0
3.5
4.5
12.5
12.5
12.5
12.5
12.5
12.5
22.0
22.0
22.0
22.0
22.0
12.5
12.5
12.5
12.5
12.5
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
0.05
0.1
0.2
0.5
1.0
2.0
0.1
0.2
0.5
1.0
2.0
10.0
10.0
10.0
10.0
10.0
10.0
16
16
16
16
16
9.0
9.0
9.0
9.0
9.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
38.0
0.018
0.036
0.072
0.180
0.360
0.720
0.02
0.04
0.08
0.16
0.32
0.030
0.060
0.150
0.300
0.600
20IR0.05
20IR0.1
20IR0.2
20IR0.5
20IR1
20IR2
49IR0.1
49IR0.2
49IR0.5
49IR1
49IR2
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
20UV0.05
20UV0.1
20UV0.2
20UV0.5
20UV1
20UV2
42UV0.1
42UV0.2
42UV0.5
42UV1
42UV2
49UV0.1
49UV0.2
49UV0.5
49UV1
49UV2
Spectrophotometer Cuvettes 1-12 Demountable Cuvettes1
*A20 cell mount not included. See page 48
*A20 cell mount not included. See page 48
[email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
Spectrophotometer Cuvettes1-13 Cuvettes with Quartz to Glass Grading 1
TYPE 61
TYPE 504
TYPE 505
Standard cuvette with graded seal tube● Two windows polished ● Quartz to glass graded seal tube: OD8 x ID6mm
● Overall height is approximately 125mm
Gas absorption cuvette with graded seal tube● Two windows polished ● Quartz to glass graded seal tube: OD8 x ID6mm
● Overall height is approximately 84mm
Semi-micro cuvette with graded seal tube● Two windows polished ● Quartz to glass graded seal tube: OD8 x ID6mm
● Base thickness is 3mm ● Overall height is approximately 125mm
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH
UV IR
UV IR
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
0.5
1
2
5
10
10
3.0
3.5
4.5
7.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
45.0
45.0
45.0
45.0
45.0
45.0
0.5
1.0
2.0
5.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
4.0
0.200
0.400
0.700
1.700
3.500
1.400
61IR0.5
61IR1
61IR2
61IR5
61IR10
505IR10
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
61UV0.5
61UV1
61UV2
61UV5
61UV10
505UV10
Outer Dimensions (mm)
L/P(mm) LENGTH DIAMETER LENGTH DIAMETER UV IRCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
74 80.0 22.0 74.0 19.0 21.000 504IR74_____________________________________________________________________________________________________504UV74
Outer Dimensions (mm)
L/P(mm) LENGTH DIAMETER LENGTH DIAMETER G UV IRCAPACITY
(ml)
Inside Dimensions (mm) Material & Part Numbers
1
2
5
10
20
50
100
3.5
4.5
7.5
12.5
22.5
52.5
102.5
22.0
22.0
22.0
22.0
22.0
22.0
22.0
1.0
2.0
5.0
10.0
20.0
50.0
100.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
0.280
0.570
1.420
2.830
5.670
14.000
28.000
37UV1
37UV2
37UV5
37UV10
37UV20
37UV50
37UV100
37IR1
37IR2
37IR5
37IR10
37IR20
37IR50
37IR100
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
37G1
37G2
37G5
37G10
37G20
37G50
37G100
TYPE 37
Micro cylindrical cuvette with graded seal tube● Two windows polished ● Quartz or glass to glass graded seal tube: OD5 x ID3mm
● Overall height is approximately 92mm
25 [email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
Spectrophotometer Cuvettes 1-14 Cryogenic Cuvettes1
TYPE 64
TYPE 65
Cryogenic cuvette with PTFE cover● Two windows polished ● All joints are excessively fused to round corners
● Minimum working area of windows is 4mm wide
Cryogenic cuvette with PTFE stopper● Two windows polished ● All joints are excessively fused to round corners
● Minimum working area of windows is 4mm wide
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH
LENGTH WIDTH
UV IR
UV IR
CAPACITY(ml)
CAPACITY(ml)
Inside Dimensions (mm)
Inside Dimensions (mm)
Material & Part Numbers
Material & Part Numbers
10
2
10
12.5
4.5
12.5
12.5
12.5
12.5
45.0
45.0
45.0
10.0
2.0
10.0
10.0
10.0
10.0
3.500
0.700
3.500
64IR10
65IR2
65IR10
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
64UV10
65UV2
65UV10
1-15 Tablet Dissolution Cells
TYPE 601
TYPE 602
Tablet Dissolution Cells 10 - 100μl● Two windows polished ● With M6 threaded connectors and PTFE tubing
● In metal housing ● All black quartz; Size of polished area is 2 x 5mm
Tablet Dissolution Cells 160μl● Two windows polished ● With M6 threaded connectors and PTFE tubing
● In metal housing ● All black quartz; Size of polished area is 2 x 8mm
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
UV
UV
CAPACITY(ml)
CAPACITY(ml)
ZD(mm)
ZD(mm)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Material &Part Numbers
Material &Part Numbers
1
1
2
2
5
5
10
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
1.0
1.0
2.0
2.0
5.0
5.0
10.0
10.0
10.0
10.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
8.0
8.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
10
10
20
20
50
50
100
100
160
160
8.5
15.0
8.5
15.0
8.5
15.0
8.5
15.0
8.5
15.0
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
601UV1A
601UV1B
601UV2A
601UV2B
601UV5A
601UV5B
601UV10A
601UV10B
602UV10A
602UV10B
[email protected] 1-347-441-4277© 2016 FIREFLYSCI, INC
Spectrophotometer Cuvettes1-15 Tablet Dissolution Cells 1
TYPE 604
TYPE 606
TYPE 605
Tablet Dissolution Cells 5 ~ 100mm Light Paths● Two windows polished ● All black quartz; Size of polished area is 3.5 x 11mm
● Tubes are made of quartz, no threading
Tablet Dissolution Cells 195 & 390μl● Two windows polished ● With M6 threaded connectors and PTFE tubing
● In metal housing ● All black quartz; Size of polished area is 3.5 x 11mm
Tablet Dissolution Cells 62 & 124μl● Two windows polished ● With M6 threaded connectors and PTFE tubing
● In metal housing ● All black quartz; Size of polished area is 3.5 x 17.5mm
Outer Dimensions (mm)
Outer Dimensions (mm)
Outer Dimensions (mm)
L/P(mm)
L/P(mm)
L/P(mm)
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
LENGTH WIDTH HEIGHT
UV
UV
UV
CAPACITY(μl)
CAPACITY(μl)
CAPACITY(μl)
ZD(mm)
ZD(mm)
ZD(mm)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Chamber Dimensions (mm)
Material &Part Numbers
Material &Part Numbers
Material &Part Numbers
50
100
5
5
10
10
0.1
0.1
0.1
0.2
0.2
0.2
0.5
0.5
0.5
1
1
1
2
2
2
52.5
102.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
50.0
100.0
5.0
5.0
10.0
10.0
0.1
0.1
0.1
0.2
0.2
0.2
0.5
0.5
0.5
1.0
1.0
1.0
2.0
2.0
2.0
11.0
11.0
11.0
11.0
11.0
11.0
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
195
390
195
195
390
390
5
5
5
12
12
12
25
25
25
62
62
62
124
124
124
8.5
8.5
8.5
15.0
8.5
15.0
8.5
15
20
8.5
15
20
8.5
15
20
8.5
15
20
8.5
15
20
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
604UV50A
604UV100A
606UV5A
606UV5B
606UV10A
606UV10B
605UV0.1A
605UV0.1B
605UV0.1C
605UV0.2A
605UV0.2B
605UV0.2C
605UV0.5A
605UV0.5B
605UV0.5C
605UV1A
605UV1B
605UV1C
605UV2A
605UV2B
605UV2C