CV PM Dr Jamaludin Mohamad Yatim Dec...

1

CURRICULUM VITAE

PERSONAL DETAILS

Name : JAMALUDIN BIN MOHAMAD YATIM Gender : Male Date of Birth : 24 September 1965 Nationality : Malaysian Marital Status : Married Permanent : No 2, Jalan PI 3/7, Taman Pulai Indah, Address 81110 Kangkar Pulai, Johor.

Correspondent : Department of Structure and Material, Address Faculty of Civil Engineering,

Universiti Teknologi Malaysia, 81310 Skudai, Johor Darul Takzim.

Tel : Mobile(019-7749250) : Office(07-5531605): Fax(07-5566157) E-mail : [email protected], [email protected] Website : www.utm.my ID Staff : 5319 Expertise : Civil Engineering (Advanced Materials and Structures) ACADEMIC QUALIFICATIONS Year 2001 : Doctor of Philosophy (Civ. Eng.)(Advanced Materials & Structures) Universiti Teknologi Malaysia Year 1992 : Master of Civ. Eng. (Structures & Materials) Universiti Teknologi Malaysia Year 1988 : Bachelor of Civil Engineering (Hons.) Universiti Teknologi Malaysia AWARD AND HONORS RECEIVED i) University Excellence Awards, Universiti Teknologi Malaysia (1997) ii) University Excellence Awards, Universiti Teknologi Malaysia (2003)

iii) Anugerah Jasa Bakti, Universiti Teknologi Malaysia (2009) iv) Quality Award, Faculty of Civil Engineering, Universiti Teknologi Malaysia (2010) v) Appreciation on Administrative Contribution, Faculty of Civil Engineering, Universiti

Teknologi Malaysia (2005 – 2012)

2

vi) Appreciation on Student Development Contribution by the Student Affairs and Alumni Office, Universiti Teknologi Malaysia (1996 – 2007)

vii) Appreciation on Professional Expert Contribution on establishing Malaysian Standard (MS), SIRIM Bhd, Malaysia (2007 – 2015)

PROFESSIONAL MEMBERSHIP / QUALIFICATIONS / RECOGNITION i) Registered Civil Engineer to the Board of Engineers, Malaysia (BEM) (1989 – present) ii) Member, Malaysian Society for Engineering and Technology (MSET) (2010 – present) iii) Member, Persatuan Industri Komposit Malaysia (PIK) (Membership Ref.: PIK/member/

2016/034) (2016 – present) iv) Member, The Japanese Society for Composite Materials (JSCM) – International

Profesional Body (Membership No: 032-416-4120) (2016 – present) WORKING EXPERIENCE i) Assistant Lecturer ‘A’ (September 1988 – September 1993) ii) Lecturer, DS45 (October 1993 – December 2004) iii) Senior Lecturer, DS52 (January 2005 – June 2006) iv) Associate Professor, DS54 (July 2006 – present) ADMINISTRATIVE EXPERIENCE University Level i) Principal, Student Residential College of Kolej Rahman Putra, UTM (Aug 2003 – June

2007) ii) Principal, Student Residential College of Kolej Tun Razak, UTM (June 1995 – July

1997) iii) Fellow, Student Residential College of Kolej Tun Hussein Onn, UTM (Apr 1994 – May

1995) iv) Member and Researcher, Center for Composite (PUSKOM), UTM (Jan 2007 – present) Faculty Level i) Head of Department, Department of Structure and Material, FKA (October 2008 –

October 2012) ii) Head of Panel, Panel of Structural Analysis Courses (January 2007 – October 2008) iii) Head, Research Group of Advanced Composites and Innovative Structures (ACIS),

UTM (2010 – present) iv) Coordinator, Panel of Structural Analysis Courses (2005 – 2008) v) Academic Advisor, Civil Engineering Undergraduate Students (1995 – present)

3

COMMITTEE (FACULTY/UNIVERSITY/NATIONAL/INTERNATIONAL LEVEL) INTERNATIONAL COMMITTEE i) Chairman, The International Symposium on Advanced Composites in Structural

Engineering and Construction 2018 (ACSEC 2018), Kuala Lumpur, Malaysia (collaboration between UTM and Persatuan Industri Komposit (PIK) Malaysia) (April 2017 – December 2018)

ii) Editorial Board, Jurnal Teknologi (Scopus Index) (2006 – present) iii) Editorial Board, International Journal of Research for Engineering and Technology

(IJRET) (2017 – present) iv) Coordinator, Global Outreach Programme to South Korea (8 December – 16 December

2010) v) Member, The Japanese Society for Composite Materials (JSCM), Tokyo, Japan (March

2016 – present) vi) Member, Technical Committee of the International Structural Dynamic Symposium

(SDS 1989), Kuala Lumpur, Malaysia (1989) vii) Member, Technical Committee of the 2nd International Conference on Frontiers of

Composite Materials 2017 (ICFCM2017), Melbourne, Australia (January 2017 – December 2017)

viii) Member, Technical Committee of the Asia Pacific Structural Engineering and Construction Conference 2009 (APSEC 2009), Langkawi, Malaysia (August 2009)

ix) Reviewer, The 2nd International Conference on Science, Engineering and the Social Sciences (ICSESS 2016), Malaysia (2016)

x) Reviewer, The International Journal of Research for Engineering and Technology (IJRET) (2016 – present)

xi) Reviewer, The International Conference on Sustainable Development (ICoSD 2017), University College of Agroscience Malaysia (UCAM) (July 2017 – December 2017)

xii) Reviewer, Jurnal Teknologi (Scopus Index) (2006 – present) xiii) Member, Committee of Asia Pacific Bridge Model Competition 2003, UTM, Johor,

Malaysia (13 January 2004) NATIONAL COMMITTEE i) Chairman, National Student Development Conference 2006 (NASDEC 2006), Grand

Season Hotel, Kuala Lumpur (8 – 9 August 2006) …….PK/2006/01692 8-9/82006 ii) Chairman, Working Group Committee on Precast Concrete Masonry Units (developing

the Malaysian Standards), SIRIM Berhad (2008-2009) iii) Chairman, Working Group Committee on Concrete Roofing Tiles (developing the

Malaysian Standards), SIRIM Berhad (2010 – 2014)……check the minute 2010, 2012, 2013, 2014

iv) Member, Persatuan Industri Komposit (PIK) Malaysia (April 2016 – present) v) Member, Technical Committee on Bricks and Blocks, SIRIM Berhad (2004 – present)

4

vi) Member, Committee of Pembentukan Kurikulum Matrikulasi Jurusan Teknikal dan Kejuruteraan, Ministry of Education, Malaysia (January 2007 – December 2008)

vii) Member, Working Group Committee on Eco-labelling of Polymer Biocomposites in Construction, SIRIM Berhad (2010 – 2011)

viii) Member, Expert Committee of Buildings Assessment, Kuala Lumpur City Hall (DBKL), Kuala Lumpur (2013 – present)

ix) Member, Panel Assessor of Research Grant Schemes (FRGS/ERGS/PRGS/IRGS/KTP) for Ministry of Higher Education, Malaysia (2009 – present)

x) Member, Committee of Seminar Pengurusan Asrama Peringkat Kebangsaan 1996 (SPARK 1996), organised by Student Affairs Department, UTM (1996)

xi) Pentaksir/Penggubal Soalan Peperiksaan, Matrikulasi Jurusan Teknikal/Kejuruteraan, Bahagian Matrikulasi, Kementerian Pelajaran Malaysia (March – December 2009)

xii) Member, Technical Committee of National Structural Engineering Conference 1988 (NASEC 1988), Kuala Lumpur, UTM (2 November 1988)

xiii) Member, Expert Group on Establishing Document Criteria of Green Cement Labelling, Construction Industry Development Board (CIDB), Kuala Lumpur, Malaysia (April 2011)

UNIVERSITY COMMITTEE i) Member, Student Development Committe, Academic and International Office, UTM

(2008 – 2012) ii) Member, Committee of UTM Alumni, Student Affairs and Alumni Office, UTM (2017 –

present) iii) Chairman, Task Force: Program Pembangunan Pelajar Tahun Satu, Student Affairs and

Alumni Office, UTM (1995) iv) Treasurer and Member of Society Council, Persatuan Kakitangan Akademik (PKA),

UTM (1994 – 1995) v) Academic Fellow, Student Affairs and Alumni Office, UTM (Jan 2009 – Dec 2011) vi) Member, Jawatankuasa Gotong Royong Perdana Universiti, UTM (July 2010) vii) Member, Panel of Evaluator of Research Project, FRGS, Research Alliance

(Construction), Research Management Centre, UTM (2012 – 2013) viii) Member, Committee of How to Get Yourself Employed (HTGYE), UTM (Jan – Dec

2012) ix) Member, Jawatankuasa Pembangunan dan Kelayakan Profesional Universiti, UTM (Jan

2012 – Dec 2013) x) Member, Panel of Evaluation on GUP Research Grants, Construction Research

Alliance, UTM (10 August 2012) xi) Supervisor, International Student Internship – Akash Rathi (IIT, India), UTM (26 Nov –

31 Dec 2012) xii) Supervisor, International Student Internship – Rachit Maheshwari (IIT, India), UTM (10

May – 10 July 2012)

5

xiii) Supervisor, International Student Internship: Non-Graduating Student Programme – Lakshmisha Arekallu Kahenahalli Lingaraju (NIT Karnataka, India), UTM (15 June – 15 July 2016)

xiv) Advisor, Career Fair and Employability Programme for UTM Gradual, Career Development Unit (CDU), UTM (Jan – Dec 2014)

xv) Member, Jawatankuasa Pembangunan Kerjaya Mahasiswa (JPKM), Career Development Unit (CDU), UTM (June – Dec 2014)

xvi) Member, Jawatankuasa Kehormat Institusi Pembangunan Felo, Student Affairs and Alumni Office, UTM (Jan 2005 – Jan 2006)

xvii) Member, Panel of Evaluator, Final Year Undergraduate Project for Architecture Students, Faculty of Build Environment, UTM (16 February 2005)

xviii) Member, Jawatankuasa Induk Minggu Haluan Siswa Universiti, UTM (2005 – 2007) xix) Member, Centre for Composites, Canselori, UTM (Jan – Dec 1998) xx) Member and Instructor, Harvard Business Case Study Pilot Programme, UTM (April –

Dec 2011) xxi) Member, Panel of Audit Evaluator, UTM (Sept 2016 – August 2018) FACULTY COMMITTEE i) Chairman, Committee of Excellent Student Development, FKA (2003 – 2008) ii) Chairman, Committee of Student Development, FKA (2011 – 2013) iii) Chairman, Jawatankuasa Penubuhan Program Baru Sarjana Kejuruteraan Forensik,

FKA (Sept – Dec 2010) iv) Chairman, Department Administrative Committee, Department of Structure and

Material, FKA (Jan – Dec 2010) v) Chairman, Jawatankuasa Khidmat Masyarakat, FKA (Jan – Dec 2010) vi) Chairman, Task Force for Postgraduate, FKA (2015) vii) Chairman, Task Force for Global Player, FKA (2015) viii) Chairman, Task Force for Undergraduate, FKA (2015) ix) Member, Committee of Faculty Quality, FKA (2003 – 2013) x) Member, Committee of ISO 9001:2008, Academic Management, FKA (2002 – 2010) xi) Member, Committee of Service Learning, FKA (Jan – Dec 2010) xii) Member, Committee of Academic, FKA (2003 – 2013) xiii) Member, Committee of Faculty Administration, FKA (2008 – 2012) xiv) Member, Committee of Post-Graduate Programme, FKA (2008 – 2012) xv) Member, Committee of Curriculum and Syllabus, FKA (2008 – 2010) xvi) Member, Committee of Research and Innovation Management, FKA (2016 – present) xvii) Member, Committee of Research, Innovation, Commercialisation and Entrepreneurial

(RICE), FKA (2016 – present)

6

xviii) Programme Advisor, Kolokium Bersama Profesor Pelawat, Prof Dr Christiono Utomo, FKA (July 2010)

xix) Student Activity Advisor, Asian Universities Build and Break Competition 2010, University Tenaga Nasional, Bangi, Selangor, FKA Civil Engineering Student (October 2010)

xx) Panel Evaluator, Undergraduate Final Year Pre-project and Project, FKA (1993 – present)

xxi) Student Activity Advisor, Bridge Competition 2012, FKA Civil Engineering Student, UTM (17 – 19 April 2012)

xxii) Advisor, Committee of Excellent Muslim Student Development, FKA (Jan – Dec 2012) xxiii) Member, Committee of Engineering Accreditational Council (EAC) / Self Assessment

Record (SAR) of Faculty, FKA (Jan – Oct 2012) xxiv) Advisor, Committee of Potential Student Development, FKA (Jan – Dec 2012) xxv) Invigilator, Final Examination for Undergraduate and Postgraduate Programmes, FKA

(1988 – present) xxvi) Advisor for Student Society/Programme, Projek Model Kejuruteraan Awam, FKA (10

December 1990) xxvii) Member, Committee of Academic for Part-Time Programme, FKA (2003) xxviii) Member, Task Force: Meningkatkan Kepelbagaian Sumber Penjanaan Pendapatan,

FKA (Jan – Dec 2017) xxix) Member, Task Force: Research Proposal Workshop By Research Champion, FKA (Jan

– Dec 2017) xxx) Member, Task Force: Exploiting Research Outcomes to Generate Incomes, FKA (Jan –

Dec 2017) xxxi) Member, Task Force: Coaching and Mentoring Research Culture, FKA (Jan – Dec

2017) xxxii) Advisor for Student Society, Persatuan Mahasiswa Kejuruteraan Awam (PEMKA), FKA

(Jan – Dec 2011) xxxiii) Member, Task Force: Public Funding, FKA (Jan – Dec 2017) xxxiv) Member, Task Force: FKA-Alumni, FKA (Jan – Dec 2017) xxxv) Member, Faculty Sports Committee, FKA (Jan – Dec 2003) xxxvi) Member, Panel of Analysis and Design Courses, FKA (Jan – Dec 2003) COMMUNITY SERVICE AND RESPONSIBILITY (CSR) i) Member, Technical Committee for the Construction of Taman Pulai Indah Mosque,

Taman Pulai Indah, Kangkar Pulai, Johor, January 2014 – November 2017 ii) Member, Investigation on Cause of Failure of the 100,000 Gallons Press Steel Water

Tank at Taman Jaya, Skudai, Johor, Majlis Daerah Johor Bahru Tengah (MPJBT), June 1995 – August 1995

7

iii) Member, Investigation on Cause of Failure of the 250,000 Gallons Press Steel Water Tank at Block C, Bukit Cagar Residential Flat, Johor Bahru, Johor, Public Work Department of Johor (JKR Johor), November – December 1993

iv) Member, Strengthening of Reinforced Concrete Bridge By Using Carbon Fibre Reinforced Polymer (CFRP) at Kuala Pilah-Bahau Bridge, Kuala Pilah, Negeri Sembilan, Public Work Department (Bridge Division) of Malaysia, August 1999 – May 2000

v) Member, Committee of Persatuan Ibubapa dan Guru, Sekolah Menengah Islam Hidayah, Johor Bahru, Johor (Jan – Dec 2012)

RESEARCH ACTIVITIES PROJECT LEADER / PRIMARY RESEARCHER FOR EXTERNAL GRANTS i) Project Leader, Kenaf Biocomposites for Construction Materials, Knowledge Transfer

Programme Flagship Grant, KTP (VOT R.J130000.7822.4L505), Ministry of Higher Education Malaysia, Budget approved RM 182,860, August 2013 – July 2015

ii) Project Leader, Research MOU between UTM and Everise Crimson (M) Sdn Bhd, Project: “Bahan Termaju Industri Pembinaan” - Product quality assessment and design, Industry commitment cost: RM100,000, 1 June 2012 – 31 May 2017

iii) Project Leader, Experimental Study on High Density Polyethylene Rice Husk Biocomposites for Structural Systems, Fundamental Research Grant Scheme, FRGS (VOT 78507), Ministry of Higher Education Malaysia, Budget approved RM50,000, November 2009 – October 2010

iv) Project Leader, Characterization and Effects of the Effective Microorganisms (EM) and Industrial Waste (IW) Materials as a Partial Mixture of Concrete, Fundamental Research Grant Scheme, FRGS (VOT 78020), Ministry of Higher Education Malaysia, Budget approved RM40,000, January 2007 – December 2008

v) Project Leader, Characterization of Natural Fiber Polymer Composites for Structural Elements, Initial Research Grant Scheme, IRGS (VOT 78934), Ministry of Higher Education Malaysia, Budget approved RM 10,000, October 2009 – September 2010

PROJECT LEADER / PRIMARY RESEARCHER FOR UNIVERSITY GRANTS i) Project Leader, Characterization of Natural Fiber/Bio-fiber Polymer Composites for

Structures, Research University Grant (GUP Tier 1) (VOT Q.J1300000.7122. 00H83), Budget approved RM 130,000.00, April 2011 – March 2013

ii) Project Leader, Experimental Study on Kenaf Fibre Reinforced Concrete Under Dynamic Loadings, Research University Grant (GUP Tier 1), (VOT Q.J130000.2522. 17H36), Budget approved RM 40,000.00, July 2017 – June 2019

PROJECT MEMBER / RESEARCHER FOR OTHER GRANTS i) Project Member, Behaviour of Beam Strengthened with Carbon Fibre Reinforced

Polymer, FRP Suppliers (JAPAN), Budget approved RM 98,000, IRPA matched the sponsored amount – July 2000 – June 2001 (International Research Grant)

8

ii) Project Member, Development of Innovative Use of Fiber Reinforced Plastic in the Construction Industry, Budget approved RM 659,300, IRPA (VOT 72134), Ministry of Science, Technology and Innovation (MOSTI), May 1999 – June 2002 (Government Grant)

iii) Project Member, Behaviour of Beam Strengthen with Carbon Fiber Reinforced Polymer, Budget approved RM 94,240, IRPA (VOT 72272), Ministry of Science, Technology and Innovation (MOSTI), January 2000 – January 2002 (Government Grant)

iv) Project Member, Experimental Study on Kenaf Bio-Fibrous Concrete Composites Under Sustained Load, Fundamental Research Grant Scheme (VOT R.J130000.7822.4F851), Ministry of Higher Education Malaysia, Budget approved RM74,000, August 2016 – July 2018 (Government Grant)

v) Project Member, The Mechanical Properties and Structural Performance of Hybrid Fibre Reinforced Composite Concrete, Exploratory Research Grant Scheme, ERGS (VOT R.J130000.7288.4L066), Ministry of Higher Education Malaysia, Budget approved RM 100,000, April 2012 – March 2013 (Government Grant)

vi) Project Member, Concrete Aggregate and Alkali-Silicate Reaction, IRPA (VOT 62121), Ministry of Science, Technology and Innovation (MOSTI), Budget approved RM 60,780, January 1991 – December 1995 (Government Grant)

vii) Project Member, The Failure of Newly Built Highways in Malaysia, UPP Short-term Grant, UTM (VOT 61039), Budget approved RM 10,000, January 1989 – January 1991 (University Grant)

viii) Project Member, Kajian Prestasi dan Penyenggaraan Struktur Simpanan Air Di Malaysia, UPP Short-term Grant, UTM (VOT 61624), Budget approved RM 25,000, June 1994 – May 1995 (University Grant)

ix) Project Member, Development of Innovative Use of Fiber Reinforced Plastic in the Construction Industry, RMC Short-term Grant, UTM (VOT 71239), Budget approved RM 64,000.00, January 199 – December 1999 (University Grant)

x) Project Member, Performance of GFRP Plates as Strengthening Material Reinforced Concrete Beams, RMC Short-term Grant, UTM (VOT 71688), Budget approved RM 20,000, January 2001 – June 2002 (University Grant)

xi) Project Member, Characterization of Continuous Bio-fiber Hybrid Composites for Structural Elements, Research University Grant (GUP Tier 2) (VOT Q.J1300000.7108. 03J43), Budget approved RM 40,000, April 2011 – March 2012 (University Grant)

xii) Project Member, Adhesion and Friction on the Interface Shear Strength of Concrete-to-Concrete Bond, Research University Grant (GUP Tier 2) (VOT Q.J1300000.2622. 06J88), Budget approved RM 40,000, April 2011 – March 2012 (University Grant)

xiii) Project Member, Structural and Durability Performance of Steel/CFRP Bonding System under Tropical Climate, Research University Grant (GUP Tier 1) (VOT Q.J1300000. 7122.00H83), Budget approved RM 130,000, April 2011 – March 2013 (University Grant)

xiv) Project Member, Problem-Based Learning in STEM Education to Develop 21st Century Skills and Low Carbon Awareness, Engineering Education, Research University Grant (GUP Tier 1) (VOT Q.J130000.2531.16H50), Budget approved RM 40,000, July 2017 – June 2019 (University Grant)

9

MEMORANDUM OF UNDERSTANDING (MoU) WITH INDUSTRIES i) Project Head, MOU between UTM and Everise Crimson (M) Sdn Bhd, Project Title:

“Kenaf Bio-composites in the Construction Industry” - Product quality assessment and design, Cost of Project: RM100,000 (Industry) + RM182,860.00 (KTP Flagship MOHE Grant). Duration: 1 June 2012 – 31 May 2017

RESEARCH AWARDS i) GOLD AWARD, for the research product of “Kenaf Fibrous Concrete for Earthquake

Resistance Structures” in the International Innovation and Industrial Design Exhibition 2017 (IIID 2017), 9 March 2017, Johor Bahru, Johor, Malaysia (International)

ii) GOLD AWARD, for the research product of “Kenaf Fibrous Pulverized Fly Ash Concrete” in the 6th International Innovation, Invention and Design Competition 2017 (INDES 2017), 6-8 November 2017, Casuarina@Meru, Ipoh, Perak Darul Redzuan, Malaysia (International)

iii) BEST OF THE BEST AWARD, for the research product of “Kenaf Fibrous Pulverized Fly Ash Concrete” in the 6th International Innovation, Invention and Design Competition 2017 (INDES 2017), 6-8 November 2017, Casuarina@Meru, Ipoh, Perak Darul Redzuan, Malaysia (International)

PATENT FILED/COPYRIGHT/DISCLOSURE i) Jamaludin Mohamad Yatim, Muhamad Faizal Jamaludin, Amirah Farhana Mohamad

and Chew Voon Yau, Characterization and Effects of the Effective Microorganisms and Industrial Waste Materials As A Partial Mixture In Concrete, Patent Drafting, 2010 (IP/PT/2010/2179 – Approved)

ii) Jamaludin Mohamad Yatim, Lecture Note For Flexibility Method In Structural Analysis, Copyright, 2017 (IP/CR/2017/0275 – Approved)

iii) Jamaludin Mohamad Yatim, Norazura Mizal Azzmi, Ogunbode Eizekel Babatunde and Azmahani Abdul Aziz, High Performance Kenaf Fibrous Concrete for Various Environment, Copyright, 2017 (IP/CR/2017/0985 – Recommended)

iv) Jamaludin Mohamad Yatim, Ogunbode Eizekel Babatunde, Hazlan Abdul Hamid, Mohd Yunus Ishak and Norazura Mizal Azzmi, Kenaf Biofibrous Concrete Composites for Earthquake Resistance Structure, Copyright, 2017 (IP/CR/2017/0991 – Recommended)

CONSULTATIONS i) Project Head, Technical Investigation and Forensic Engineering, Determine Defects

And Structural Safety Of Building, Lot No. 1064 PN 20276 and Lot 1065 PN 20275 both in Mukim of Bertam, District of Melaka Tengah, State of Melaka, Oct – Dec 2010, Joyous Seasons Sdn Bhd (UTSB Vot 567 – RM 103,186.50)

ii) Member, Designer and Technical Advisor, Designing and Construction Monitoring on Three Units 40,000 Gallons GFRP Water Tanks and Reinforced Concrete Supporting Slabs at Sibu Island Resort, Johor Coorperation, April 1999 – October 2000, Johore Coorporation Sdn Bhd (UTSB Vot 194 – RM 15,000.00)

10

iii) Member, Designer and Technical Advisor, Projek Perundingan Carbon Fibre Reinforced Polymer (CFRP) Sebagai Penguat Jambatan Konkrit di Kuala Pilah, Negeri Sembilan, Jan – May 2000, Funded by the Consortium of FRP suppliers (UTSB Vot 211 – RM 17,600.00)

TEACHING ACTIVITIES Session Sem Subject Code Subject Credit

Hour Total

1988/1989 1 SKA 1112 Mekanik Struktur dan Bahan

2 39

1988/1989 1 DKA 2952 Makmal Struktur 2 45 1988/1989 1 DKA 1051 Makmal Konkrit 1 40 1988/1989 2 SKA 1951 Makmal Konkrit 1 42 1988/1989 2 DKA 2952 Makmal Konkrit 2 38 1989/1990 1 SKA 1112 Mekanik Struktur dan

Bahan 2 45

1989/1990 2 SKA 0072 Statik 2 45 1989/1990 1 SKA 5032 Pra-Projek Tahun Akhir 2 2 1989/1990 2 SKA 5034 Projek Tahun Akir 4 2 1990/1991 1 DKA 0072 Mekanik Statik 2 45 1990/1991 1 SKA 2051 Makmal Struktur dan

Konkrit 1 45

1990/1991 1 SKA 0153 Lukisan Kejuruteraan 3 45 1990/1991 1 SKA 1112 Mekanik Struktur dan

Bahan 2 45

1990/1991 1 SKA 3052 Makmal Konkrit dan Struktur

2 45


1 45

1990/1991 1 SKA 5032 Pra-Projek Tahun Akhir 2 4 1990/1991 2 SKA 1112 Mekanik Struktur dan

Bahan (2 seksyen) 2 90


1 45


2 45

1990/1991 2 SKA 5034 Projek Tahun Akir 4 4 1992/1993 1 DKA 2144 Rekabentuk Struktur II –

Amali 4 45

1992/1993 2 DKA 2144 Rekabentuk Struktur II – Amali

4 38

1993/1994 1 SKA 5032 Pra-Projek Tahun Akhir 2 3 1993/1994 1 SKA 3113 Teori Struktur II 3 40 1993/1994 1 DKA 2952 Makmal Konkrit dan

Struktur 2 40

1993/1994 2 SAW 2153 Lukisan Kejuruteraan 3 36

11

1993/1994 2 SKA 3113 Teori Sturktur II 3 44 1993/1994 2 DKA 2952 Makmal Struktur 2 44 1993/1994 2 SKA 5034 Projek Tahun Akir 4 3 1994/1995 1 SKA 4113 Teori Struktur III 3 44 1994/1995 1 SKA 3113 Teori Sturktur II 3 42 1994/1995 1 STA 4013 Analisis Struktur 3 44 1994/1995 1 DKA 2144 Rekabentuk Struktur II –

Amali 4 44

1994/1995 1 DKA 2952 Makmal Struktur 2 38 1994/1995 1 SKA 5032 Pra-Projek Tahun Akhir 2 2 1994/1995 2 SKA 3143 Rekabentuk Struktur II –

Kuliah&Amali 3 42

1994/1995 2 SKA 5034 Projek Tahun Akir 4 2 1994/1995 2 DAW 3143 Rekabentuk Struktur II –

Kuliah&Amali 3 38

1995/1996 1 DAW 3143 Rekabentuk Struktur II – Kuliah&Amali

3 40

1995/1996 1 SAW 4052 Makmal Konkrit 2 40 1995/1996 1 SKA 5032 Pra-Projek Tahun Akhir 2 1 1995/1996 2 DAW 3143 Rekabentuk Struktur II –

Kuliah&Amali 3 41

1995/1996 2 SKA 5034 Projek Tahun Akhir 2 1 1995/1996 2 SAW 4052 Makmal Konkrit 2 38 1996/1997 1 SKA 5032 Pra-Projek Tahun Akhir 2 3 1996/1997 1 DAW 2114 Teori Struktur

(2 seksyen) 4 84

1996/1997 2 SKA 5034 Projek Tahun Akhir 2 3 1996/1997 2 DAW 2114 Teori Struktur 4 41 1997/1998 1 SAW 3213 Teori Struktur I 3 40 1997/1998 1 DAW 3952 Makmal Struktur 2 40 1998/1999 1 SAW 5032 Pra-Projek Tahun Akhir 2 1 1998/1999 2 SAW 5034 Projek Tahun Akhir 2 1 1999/2000 1 SAW 5032 Pra-Projek Tahun Akhir 2 2 1999/2000 2 SAW 5034 Projek Tahun Akhir 2 2 2001/2002 2 SAM 2213 Mechanic of Structures

and Materials (2 sections)

3 79

2001/2002 2 SAM 4032 Pre-Project Final Year 2 2 2002/2003 1 SAM 4034 Project Final Year 2 2 2002/2003 1 SAM 3045 Industrial Training 5 16 2002/2003 1 SAM 3223 Theory of Structures

(2 sections) 3 84

2002/2003 1 SPK 2312 Mekanik Struktur 2 40 2002/2003 1 SAM 4032 Pre-Project Final Year 2 4 2002/2003 2 SAM 3223 Theory of Structures 3 44

12

2002/2003 2 SPK 2222 Teori Struktur 2 36 2002/2003 2 SAM 4032 Pre-Project Final Year 2 1 2002/2003 2 SAM 4034 Project Final Year 4 4 2003/2004 1 MAB 1023 Analysis and Design of

Structural System (2 sections)

3 40

2003/2004 1 SAM 4034 Final Year Project 4 1 2003/2004 2 SAM 3223 Theory of Structures 3 45 2003/2004 2 SAM 5064 Final Year Project 4 1 2004/2005 1 SAM 4213 Structural Analysis 3 40 2004/2005 1 SZW 4213 Structural Analysis 3 20 2004/2005 1 SAM 5062 Pre-Project Final Year 2 9 2004/2005 1 SAM 5022 Civil Engineering

System and Design 2 72

2004/2005 2 SAM 4213 Structural Analysis 3 40 2004/2005 2 SAM 4062 Makmal Struktur 2 52 2004/2005 2 SAM 5064 Final Year Project 4 9 2005/2006 1 SAM 4213 Structural Analysis 3 50 2005/2006 1 SAM 5062 Pre-Project Final Year 2 8 2005/2006 1 MAB 1023 Analysis and Design of

Structural System 3 24

2005/2006 1 SAB 1042 Makmal Struktur 2 52 2005/2006 2 SAM 4213 Structural Analysis 3 54 2005/2006 2 SAM 4062 Makmal Konkrit 2 51 2005/2006 2 SAM 5064 Final Year Project 4 8 2006/2007 1 SAB 4022 Pre-Project Final Year 2 4 2006/2007 2 SAM 5062 Research Methodology

and Pre-Project 2 125

2006/2007 2 SAM 5064 Final Year Project 4 4 2006/2007 2 SAM 4213 Structural Analysis 3 56 2007/2008 1 SAB 4022 Pre-Project Final Year 2 7 2007/2008 2 SAB 4223 Structural Analysis

(2 sections) 3 87

2007/2008 2 SAB 4034 Final Year Project 4 7 2008/2009 1 SAB 4022 Pre-Project Final Year 2 2 2008/2009 2 MAE 0013 Masters Pre-Project 3 3 2008/2009 2 SAB 4034 Final Year Project 4 2 2008/2009 2 SAB 4223 Structural Analysis 3 49 2009/2010 1 SAB 4223 Structural Analysis 3 50 2009/2010 1 MAE 0024 Masters Project 3 3 2009/2010 2 SAB 4022 Pre-Project Final Year 2 3 2009/2010 2 SAB 4223 Structural Analysis 3 56 2010/2011 1 SAB 4034 Final Year Project 4 3 2010/2011 1 SAB 4022 Research Methodology

and Pre-Project 2 180

13

(Section 1, 2 and 3) 2010/2011 1 SAB 4113 Project Management –

Case Method (Harvard Bussiness School)

3 30

2010/2011 1 SAB 4223 Structural Analysis 3 65 2010/2011 2 SAB 4223 Structural Analysis 3 65 2011/2012 1 SAB 4223 Structural Analysis 3 53 2011/2012 2 SAB 4022 Research Methodology

and Pre-Project 2 4

2011/2012 2 SAB 4223 Structural Analysis 3 44 2011/2012 2 MAE 1013 Advanced Structural

Analysis ( 2 sections)

3 54

2012/2013 1 SAB 4223 Structural Analysis 3 43 2012/2013 1 MAE 1013 Advanced Structural

Analysis 3 2

2012/2013 1 SAB 4022 Research Methodology and Pre-Project

2 1

2012/2013 1 SAB 4034 Final Year Project 4 4 2012/2013 1 MAM 0013 Master Pre-Project 3 4 2012/2013 1 MAE 0024 Master Project 3 1 2012/2013 2 MAE 1013 Advanced Structural

Analysis (2 sections) 3 60

2012/2013 2 SAB 4223 Structural Analysis 3 52 2013/2014 2 SKAA 3012 Makmal Kejuruteraan

Awam 2 2 44

2013/2014 2 MAE 1013 Advanced Structural Analysis

3 12

2013/2014 2 SAB 4223 Structural Analysis 3 60 2014/2015 1 SKAA 4223 Structural Analysis 3 41 2014/2015 1 MKAE 1013 Advanced Structural

Analysis (Section 3) 3 20

2014/2015 1 SAB 4223 Structural Analysis 3 2 2014/2015 1 SKAA 2012 Makmal Kejuruteraan

Awam I 2 32

2014/2015 1 MKAE 1013 Advanced Structural Analysis (Section 1)

3 16

2014/2015 2 SKAA 3012 Makmal Kejuruteraan Awam II

2 46

2014/2015 2 SKAA 4223 Structural Analysis 3 39 2014/2015 2 SKAA 2012 Makmal Kejuruteraan

Awam I 2 48

2014/2015 2 MKAE 1013 Advanced Structural Analysis (2 Section)

3 26

2015/2016 1 SKAA 4223 Structural Analysis 3 40 2015/2016 1 SKAA 2012 Makmal Kejuruteraan

Awam I 2 45

14


3 31

2015/2016 1 SKAA 4022 Pre-Project Final Year 2 3 2015/2016 2 SKAA 4223 Structural Analysis 3 35 2015/2016 2 SKAA 2012 Makmal Kejuruteraan

Awam I 2 42


3 16

2015/2016 2 SKAA 4034 Final Year Project 4 3 2016/2017 1 SKAA 4223 Structural Analysis 3 20 2016/2017 1 MKAE 1013 Advanced Structural

Analysis (2 Section) 3 38

2016/2017 1 SKAA 4022 Pre-Project Final Year 2 2 2016/2017 2 SKAA 3012 Makmal Kejuruteraan

Awam II 2 44

2016/2017 2 SKAA 4223 Structural Analysis 3 46 2016/2017 2 MKAE 1013 Advanced Structural

Analysis 3 1

2016/2017 2 SKAA 4034 Final Year Project 4 2 TOTAL 382

SUPERVISION PhD Student

Year No. Name Status Title Roles of Supervision

2010 1. Reza Mahjoub Vagheeh Dasht

Graduated (December

2013) - Graduate On Time (GOT)

Characterization of continuous Kenaf Hybrid Composites for Structural Elements

Main Supervisor

2010 2. Meisam Razavi Graduated (June 2016)

Performance of Natural Fiber Polymer Composites Under the Tropical Climate

Main Supervisor

2012 3. Lam Tian Fook Graduated (April 2017)

Kenaf Fibrous Concrete for Reinforced Concrete Elements

Main Supervisor

2013 4. Masoud Razavi Graduated (January

2017)

Performance of Kenaf Fibrous Concrete under Dynamic Loadings

Main Supervisor

2014 5. Hossein Mohammadhosseini

Graduated (July 2017) - Graduate On Time (GOT)

Strength, Durability and Microstructural Analysis of Concrete incorporating Waste Carpet Fiber and Palm Oil Fuel Ash

Main Supervisor

15

2014 6. Ogunbode Ezekiel Babatunde

Graduated (October


Long Term Performance of Kenaf Fibrous Concrete due to Mechanical Loads

Main Supervisor

2015 7. Norazura Binti Mizal Azzmi

Ongoing (2015-2018)

Hygrothermal Performance of Kenaf Fibre Insulated Concrete Wall

Main Supervisor

2016 8. Adole Micheal Adole

Ongoing (2016-2019)

Characterization of Kenaf-Saw Dust Sandwich Polymeric Composites for Load-Bearing Elements

Main Supervisor

2004 9. Fathoni Usman Graduated (September

2008)

Neural Network Model Development for Service Life Prediction of Building Components

Co-Supervisor

2011 10. Mehran Gholami Graduated (February

2015)

Performance of Steel Section Strengthened with CFRP Plates under Tropical Climate

Co-Supervisor

2011 11. Nor Hafizah Binti Salleh

Ongoing (2011-2017)

Flexural Behaviour of GFRP Beams Strengthened with CFRP Plates

Co-Supervisor

Masters Student (Research) Year No. Name Status Title Type Roles of

Supervision 2010 1. Nur Hafizah

Binti Abdul Khalid

Graduated (April 2012) - Graduate On Time (GOT)

Characterizations of Kenaf Fiber Reinforced Polymer Composites for Structural Elements

Research Main Supervisor

2011 2. Mohammad Khalajmasoumi

Graduated (January


Computational Modelling of Hard Polyethylene Precast Panel for Temporary Supporting of Tunnel

Research Co-Supervisor

2015 3. Muhammad Zahied Bin Mohd Noor

Ongoing 2015 - 2017

Performance of Connections of GFRP Composites Pipes for Petroleum


16

Fluids under Corrosive Environment

2017 4. Syahirah Binti Mohd Noor

Ongoing 2017 - 2019

Characterization of Kenaf-Steel Hybrid Fibres Polymer Composites


Masters Student (Taught-Course Master Project) Year No. Name Status Title Type Roles of

Supervision 2008 1. Liew Shan

Chin Graduated (November

2008)

Characterization of Natural Fiber Polymer Composites for Structural Application

Master Project - Taught Course

Main Supervisor

2009 2. Loo Chang Soon

Graduated (May 2009)

The Performance of Rice Husk-High Density Polyethylene (HDPE) Biocomposite Decking Structure under Bending Load

Master Project - Taught Course

Main Supervisor

2009 3. Noorazwa Binti Zulkarnain

Graduated (November

2009)

The Use of Biocomposites to Retrofit Concrete Columns

Master Project -Taught Course

Main Supervisor

2009 4. Mohamad Hizam Shah Bin Rusmi

Graduated (November

2009)

The Use of FRP Pultruded Section for Simple Truss Model


Main Supervisor

2013 5. Reza Ansari Graduated (June 2013)

Construction Aspect for Sustainable Bridges


Main Supervisor

2013 6. Masoud Razavi

Graduated (July 2013)

Performance of Kenaf Fiber Reinforced Concrete


Main Supervisor

POSTGRADUATE EXAMINATION / VIVA UTM STUDENTS/VIVA (CHAIRMAN)

i) Tan Cher Siang (PhD), (1 October 2009)

17

ii) Mohammadamin Azimi (PhD), UTM (11 January 2012) iii) Libriati Binti Zardasti (M.Phil), UTM (6 December 2010) iv) Navid Ranjbar (M.Phil), UTM (16 February 2012) v) Suhaimi Shaedon (M.Phil), UTM (4 July 2012) vi) Norazah binti Arjuna (M.Phil), UTM (2015) vii) Lee Shu Chi (M.Phil), UTM (2015) viii) Kamilah Binti Mohd Said (M.Phil), UTM (2015)

PhD EXTERNAL EXAMINER

i) Nauwal Hj Suki, Flexural Resistance of RC Beams With Near Surface Mounted CFRP Plate Under Tropical Climate Effects, UiTM (9 August 2017)

MSc EXTERNAL EXAMINER

i) Mohd Yuasrizam Musa, Steel Fibres as Flexural Cracks Inhibitors in Concrete Beam under Static Loading, UiTM (22 January 2015)

PhD INTERNAL EXAMINER

i) Mahdi Rafieeizonooz, Leachability, Mechanical Properties and Durability Performance of Concrete Containing Coal Bottom Ash and Fly Ash, UTM (7 November 2016)

ii) Mohd Yunus bin Ishak, Shear Behaviour of Reinforced Concrete Beams Strengthened with Bonded Carbon Fiber Fabric, UTM (23 April 2012)

iii) Mostafa Samadikouchaksaraei, Properties of Mortar Containing Homogeneous Ceramic Tile Waste, UTM (19 December 2016)

iv) Hatami Somaieh, Non-Linear Behaviour of Reinforced Concrete Shear Walls With Octagonal Openings, UTM (19 October 2015)

v) Oritola Sikiru Folahan, Properties and Flexural Performance of Iron ORE Tilings Concrete, UTM (3 August 2017)

PANEL EVALUATOR OF PHD / M.PHIL / MASTER PROJECTS

i) Chairman of Panel Evaluator, PhD Project (Marwan Fadhil Abid), School of Postgraduate Studies, UTM (12 January 2012)

ii) Chairman of Panel Evaluator, PhD Project (Norhafizah Salleh), School of Postgraduate Studies, UTM (11 January 2012)

iii) Member of Panel Evaluator, PhD Project (Nurul Izzah Mokhtar), School of Postgraduate Studies, UTM (10 January 2012)

iv) Member of Panel Evaluator, PhD Project (Sujatullah), School of Postgraduate Studies, UTM (16 March 2014)

18

v) Member of Panel Evaluator, PhD Project (Abdeliazim), School of Postgraduate Studies, UTM (3 April 2017)

vi) Chairman of Panel Evaluator, M.Phil Project (Javid Mahlouji), School of Postgraduate Studies, UTM (19 December 2012)

vii) Member of Panel Evaluator, M.Phil Project (Hazimah Sarlan), School of Postgraduate Studies, UTM (23 April 2012)

viii) Member of Panel Evaluator, Master Project (Muhammad Salman Nazar), School of Postgraduate Studies, UTM (18 December 2012)

ix) Member of Panel Evaluator, Master Project (Mudathir Omer Adam), School of Postgraduate Studies, UTM (18 December 2012)

x) Member of Panel Evaluator, Master Project (Seyedeh Sara Mir Yousefi Ata), School of Postgraduate Studies, UTM (19 December 2012)

xi) Member of Panel Evaluator, Master Project (Siti Nurul Asma’ Mohd Nashruddin), School of Postgraduate Studies, UTM (19 December 2012)

PUBLICATIONS JOURNAL ISI Journal: 1. Hossein Mohammadhosseini and Jamaludin Mohamad Yatim, Microstructure and residual

properties of green concrete composites incorporating waste carpet fibers and palm oil fuel ash at elevated temperatures, Journal of Cleaner Production, Vol. 144, (2017), pp 8-21, (http://dx.doi.org/10.1016/j.jclepro.2016.12.168) (IF: 4.959) (Quartile: Q1)

2. Hossein Mohammadhosseini, A.S.M. Abdul Awal, Jamaludin B. Mohd Yatim, The Impact Resistance and Mechanical Properties of Concrete Reinforced with Waste Polypropylene Carpet Fibres, Journal of Construction and Building Materials, Vol. 143, (2017), pp 147–157, (http://dx.doi.org/ 10.1016/j.conbuildmat.2017.03.109)(IF: 2.421) (Quartile: Q1)

3. Hossein Mohammadhosseini, Jamaludin Mohamad Yatim, Abdul Rahman Mohd Sam and A.S.M. Abdul Awal, Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash, Journal of Cleaner Production, Vol. 144, (2017), pp 448-458, (http://dx.doi.org/10.1016/j.jclepro.2016.12.151) (IF: 4.959) (Quartile: Q1)

4. Reza Mahjoub, Jamaludin Mohamad Yatim, Abdul Rahman Mohd Sam, Sayed Hamid Hashemi, Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications, Journal of Construction and Building Materials, Elsevier, Vol. 55, (2014), pp 103-113. (IF: 2.293) (Quartile: Q1)

5. Reza Mahjoub, Jamaludin Mohamad Yatim, Abdul Rahman Mohd Sam, Mehdi Raftari, Characteristics of Continuous Unidirectional Kenaf Fiber Reinforced Epoxy Composites, Journal of Materials and Design, Elsevier, Vol. 64, (2014), pp 640-649. (IF: 2.994) (Quartile: Q1)

6. Mehran Gholami, Abdul Rahman Mohd Sam, Jamaludin Mohamad Yatim, Mahmood Md Tahir, A review on steel/CFRP strengthening systems focusing environmental performance, Journal of Construction and Building Materials, Elsevier, Vol. 47, (2013), pp 301–310. (IF: 2.293) (Quartile: Q1)

19

7. Reza Mahjoub, Jamaludin Mohamad Yatim and Abd Rahman Md Sam, A Review of Structural Performance of Oil Palm Empty Fruit Bunch Fiber in Polymer Composites, Journal of Advances in Materials Science and Engineering, Hindawi Publishing Corporation, Vol. 2013, Article ID 415359, (2013), pp 9. http://dx.doi.org/10.1155/2013/ 415359 (ISI: Impact factor 0.5).

8. Mehran Gholami, Abdul Rahman Mohd Sam, Jamaludin Mohamad Yatim, Assessment of Bridge Management System in Iran, Journal Procedia Engineering, Elsevier Ltd., Vol. 54 (2013), pp 573 – 583. (ISI: Impact Factor 2.812)

9. Azmahani Abdul Aziz, Sharipah Norbaini Syed Sheikh, Khairiyah Mohd Yusof, Amirmudin Udin and Jamaludin Mohamad Yatim, Developing a Structural Model of Assessing Students’ Knowledge-Attitudes towards Sustainability, Journal Procedia – Social and Behavioral Sciences, Elsevier, Vol 56, (2012), pp 513-522. (ISI: Impact Factor 0.386)

10. Azmahani A. Aziz, Khairiyah M. Yusof and Jamaludin M. Yatim, Evaluation on the Effectiveness of Learning Outcomes from Students’ Perspectives, Journal Procedia – Social and Behavioral Sciences, Elsevier, Vol 56, (2012), pp 22-30. (ISI: Impact Factor 0.386)

11. Hafizah N.A.K, Bhutta M.A.R, Jamaludin M.Y., Warid M.H., Ismail M., Rahman M.S., Yunus I., Azman M., Kenaf Fiber Reinforced Polymer Composites for Strengthening RC Beams, Journal Of Advanced Concrete Technology, Vol. 12 (June 2014), pp 167-177. (ISI: Impact Factor 0.554)

12. Azmahani Abdul Aziz, Khairiyah Mohd Yusof, Amirmudin Udin, Jamaludin Mohamad Yatim, Development of Students’ Knowledge-Behavioural Changes in Relation to Sustainability through a Case Study, Journal of Procedia – Social and Behavioral Sciences, Elsevier Publisher, Vol. 102, pp 568 – 576, (2013). (ISI: Impact Factor 0.386)

SCOPUS Journal: 1. Khalajmasoumi, M., Ibrahim, I.S., and Mohd Yatim, J., Nonlinear Mechanical Analysis of

Polymer Precast Panel for Temporary Support of Tunnels, Journal of Advanced Materials Research, Vols. 488-489, Trans Tech Publications, Switzerland, 2012, pp. 547-551, (http://www.scientific.net). (Scopus)

2. Khalajmasoumi, M., Koloor, S.S.R., Arefnia, A., Ibrahim, I.S., and Mohd Yatim, J., Explicit Dynamic Simulation of High Density Polyethylene Beam under Flexural Loading Condition, Journal of Applied Mechanics and Materials, Vols. 229-231, Trans Tech Publications, Switzerland, 2012, pp. 2150-2154 (http://www.scientific.net). (Scopus)

3. Khalajmasoumi, M., Koloor, S.S.R., Arefnia, A., Ibrahim, I.S., and Mohd Yatim, J., Finite Element Analysis of Curvature Precast Polymer Panel for Temporary Support of Tunnels, Journal of Applied Mechanics and Materials, Vols. 229-231, Trans Tech Publications, Switzerland, (2012), pp. 771-777 (http://www.scientific.net) (Scopus)

4. Khalajmasoumi, M., Koloor, S.S.R., Arefnia, A., Ibrahim, I.S., and Mohd Yatim, J., Hyperelastic Analysis of High Density Polyethylene under Monotonic Compressive Load, Journal of Applied Mechanics and Materials, Vols. 229-231, Trans Tech Publications, Switzerland, (2012), pp. 309-313 (ISSN: 1662-7482) (DOI:10.4028/ www.scientific.net/AMM.229-231.309)(Scopus)

20

5. Ogunbode Ezekiel Babatunde, Jamaludin Mohamad Yatim, Mohd Yunus Ishak, Razavi Masoud and Razavi Meisam, Potential of Kenaf Fibre in Bio-Composite Production: A Review, Jurnal Teknologi, Vol. 77: 12, (2015), pp 23-30, (eISSN 2180-3722) (www.Jurnalteknologi.utm.my) (Scopus)

6. Mahjoub, R., Yatim J.M., Mohd Sam A., Zulkarnain N.A., Raftari M., The use of Kenaf fiber reinforced polymer to confine the concrete cylinder, Materials Today: Proceedings 3, pp 459-463, (2016) (Scopus)

7. Hossein Mohammadhosseini and Jamaludin Mohamad Yatim, Evaluation of the Effective Mechanical Properties of Concrete Composites Using Industrial Waste Carpet Fiber, INAE Letter, DOI 10.1007/s41403-017-0016-x, Springer, Singapore, 2017. (ISSN: 2366-326X (Print) 2366-3278 (Online)) (Scopus)

8. E. B. Ogunbode, M. Y. Jamaludin, M. Y. Ishak, D. M. Abeku and M. Razavi, Long term behaviour of fibrous concrete composite (FCC): A conspectus, Journal of Advanced Review on Scientific Research, Vol 33, Issue 1, (2017), pp 1-12, Penerbit Akademia Baru (ISSN: 2289-7887) (Scopus)

9. Hafizah, N. A. K., Hussin, M. W., Jamaludin, M. Y., Bhutta, M. A. R., Ismail, M., Azman, M., Tensile Behaviour of Kenaf Fiber Reinforced Polymer Composites, Jurnal Teknologi (Sciences and Engineering), Vol. 69: 3, (2014), pp 11-15, (eISSN 2180-3722) (www.Jurnalteknologi.utm.my) (Scopus)

10. Norhafizah Salleh, Abdul Rahman Mohd Sam, and Jamaludin Mohamad Yatim, Flexural Behaviour of Reinforced Concrete Beam with Glass Fiber Reinforced Polymer (GFRP) Bar Strengthened with Carbon Fiber Reinforced Polymer (CFRP) Plate, Journal of Advanced Materials Research, Vol 1051, (2014), pp 748-751 (DOI: 10.4028/ www.scientific.net/AMR.1051.748) (ISSN: 1662-8985) (Scopus)

11. Azmahani Abdul-Aziz, Khairiyah Mohd-Yusof, Amirmudin Udin, Jamaludin Mohamad Yatim, Wan-Haslina Hassan, Inculcating Awareness of Sustainable Development in First Year Engineering Students - A Comparative Study of Pedagogical Approaches, Proceedings of the Research in Engineering Education Symposium (REES 2013), 2013, Julai 2013, Putrajaya, Kuala Lumpur, pp 379-387, (Code 102682)(ISBN: 978-162993136-4)(Scopus)

12. Samir A. Al-Gailani, Abu Bakar Mohammad, Redhwan Q. Shaddad, Mohd Y. Jamaludin, Single and Multiple Transceiver Simulation Modules for Free-Space Optical channel in Tropical Malaysian Weather, IEEE Business Engineering and Industrial Applications Colloquium (BEIAC), Langkawi, Malaysia, 7-9 April 2013 (Date Added to IEEE Xplore: 18 July 2013), Publisher IEEE, (DOI: 10.1109/BEIAC.2013.6560203)(eISBN: 978-1-4673-5968-9)(Print ISBN: 978-1-4673-5967-2) (Scopus)

13. Mohammad Ismail, Bala Muhammad, Jamaluddin Mohd Yatim, Ainul Haezah Noruzman and Yong Woo Soon, Behavior of Concrete with Polymer Additive at Fresh and Hardened States, Journal Procedia Engineering, Elsevier Ltd., Vol. 14 (2011), pp 2230 – 2237 (ISSN: 1877-7058)(DOI:10.1016/j.proeng.2011.07.281)(Scopus)

14. Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Fathoni Usman, Evaluation of Building Performance Using Artificial Neural Network: Study on Service Life Planning in Achieving Sustainability, Civil-Comp Proceedings, Vol 82, The Eight International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, Hotel Villa Pamphili, Rome, Italy, 30 August – 2

21

September 2005 (Code 102646)(ISSN:17593433)(ISBN:1905088051;978-190508805-8)(Scopus)

15. Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Fathoni Usman, Towards Better Housing Management: Service life Planning in Achieving Sustainability for Affordable Housing, Civil-Comp Proceedings, The Tenth International Conference on Civil, Structural and Environmental Engineering Computing, Hotel Villa Pamphili, Rome, Italy, 30 August – 2 September 2005 (Code 86774) (ISBN:1905088000; 978-190508800-3) (Scopus)

NON-INDEXED Journal: 1. Jamaludin Mohamad Yatim, Siti Hamisah Tapsir, Zainai Mohamed, Environmental Effects

On Mechanical Properties Of Glass/ Polyester Composites: State Of The Art Review, Journal Institution of Engineers, Malaysia, (2001)

2. Jamaludin Mohamad Yatim, Shukur Abu Hassan, Azraii Kassim and Kamal Azam Bani Hashim, Projek Pembinaan Tangki Penyimpanan Air GFRP Muatan 40,000 Gelen (3 Unit) Di Sibu Island Resort, Mersing, Journal Mekanikal, UTM, Malaysia, (1998)

3. Jamaludin Mohamad Yatim dan Hassanan Md Nor, Keretakan Jalanraya Konkrit Di Malaysia, Journal Kejuruteraan Awam, UTM, Malaysia, (1991)

4. Jamaludin Mohamad Yatim, Siti Hamisah Tapsir, Abd Rahman Md Sam and Shukur Abu Hassan, The Use of Fiber Reinforced Polymer (FRP) in the Construction Industry, Civil Engineering Bulletin, Malaysia, (2000)

5. Jamaludin Mohamad Yatim and Siti Hamisah Tapsir, Environmental Effects on Mechanical Properties of Pultruded Sections, Civil Engineering Journal, Faculty of Civil Engineering, (1999)

6. Jamaludin Mohamad Yatim, Siti Hamisah Tapsir, Abd Rahman Md Sam and Shukur Abu Hassan, The Use of Fiber Reinforced Polymer (FRP) in the Construction Industry, Civil Engineering Journal, (1999)

7. Ng See King, Siti Hamisah Tapsir, Abd Rahman Mohd Sam, Maisarah Ali, Shukur Abu Hassan, Jamaludin Mohamad Yatim and I. J. Azmi, Flexural Performance of Reinforced Concrete Beam Strengthened with Carbon Fibre Reinforced Polymer, IEM Journal, (2002)

8. Norhafizah Salleh, Abdul Rahman Mohd Sam, and Jamaludin Mohamad Yatim, Flexural Behavior of GFRP RC Beam Strengthened with Carbon Fiber Reinforced Polymer (CFRP) Plate: Cracking Behavior, Journal of Applied Mechanics and Materials, Vol 752-753, (2015), pp 610-616.

9. Tian Fook Lam and Jamaludin Mohamad Yatim, Mechanical properties of kenaf fiber reinforced concrete with different fiber content and fiber length, Journal of Asian Concrete Federation, Vol. 1, No. 1, pp. 11-21, (2015), (ISSN 2465-7964 / eISSN 2465-7972) (http://dx.doi.org/10.18702/acf.2015.09.1.11)

10. Tian Fook Lam and Jamaludin Mohamad Yatim, An Experimental Study on the Effect of Alkali Treatment on Properties of Kenaf Fiber for Reinforced Concrete Elements, International Journal of Research in Engineering and Technology, Vol. 04 Issue: 08, (2015), (eISSN: 2319-1163 / pISSN: 2321-7308) (http://www.ijret.org)

11. Ogunbode Ezekiel Babatunde, Jamaludin Mohamad Yatim, Ishak Mohd Yunus, Hazlan Abdul Hamid, Azmahani Abdul Aziz and Masoud Razavi, Compressive Creep of Kenaf

22

Bio-Fibrous Concrete Composite Under One Dimensional Stressing, Malaysian Journal of Civil Engineering, Vol. 28, Special Issue No.3, 2016, pp 279-289. (ISSN: 1823-7843) (http://www.civil.utm.my)

12. Mohammad Ismail, Rosli Mohamad Zin, Mohamad Elghelani Ismail, Jamaludin Mohamad Yatim, Wahid Omar, Awareness Among Professionals in Malaysian Construction Industries on Reinforcement Corrosion Prevention and Protection, Malaysian Journal of Civil Engineering, Vol. 20, No. 2, 2011 (http://www.civil.utm.my)

H-INDEX i) H-Index Scopus = 5 ii) H-Index Pure UTM = 5 iii) H-Index Google Scholars = 8 PROCEEDINGS/CONFERENCE 1) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Zainai Mohamed, Durability of

Fiber Reinforced Polymer Composites for Infrastructures in Tropical Region: Physical Studies, Reinforced Plastics Asia 2000 Conference, The Mandarin Oriental, Kuala Lumpur, 21-22 September 2000. (International)

2) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Zainai Mohamed, Behaviour of Pultruded GFRP Composites Under Tensile and Compressive Loading, 5th Asia Pacific Structural Engineering And Construction Conference, Hyatt Hotel, Johor Bahru, Johor, Malaysia, 26-28 August 2003. (International)

3) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Zainai Mohamed, Behaviour of Pultruded GFRP Under Tensile and Compressive Loading, The 5th Asia Pacific Structural Engineering and Construction Conference 2003 (APSEC 2003), 2-4 September 2003, Johor Bahru, Johor, Malaysia.

4) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Zainai Mohamed, Effects of Tropical Weather on the Compression Properties of Pultruded GFRP Composites, The 6th Asia Pacific Structural Engineering and Construction Conference 2006 (APSEC 2006), 15-17 August 2006, Kuala Lumpur, Malaysia.

5) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Zainai Mohamed, Durability of Fiber Reinforced Polymer Composites for Infrastructures in tropical Regions: Physical Studies, Reinforced Plastic Asia 2000 (RP Asia 2000), Kuala Lumpur, 20-22 Sept 2000.

6) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Fathoni Usman, Evaluation of Building Performance Using Artificial Neural Network: Study on Service Life Planning in Achieving Sustainability, The Eight International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, Hotel Villa Pamphili, Rome, Italy, 30 August – 2 September 2005. (International)

7) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Fathoni Usman, Towards Better Housing Management: Service life Planning in Achieving Sustainability for Affordable Housing, The Tenth International Conference on Civil, Structural and Environmental Engineering Computing, Hotel Villa Pamphili, Rome, Italy, 30 August – 2 September 2005. (International)

23

8) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Fathoni Usman, An Artificial Neural Network Approach in Service Life Prediction of Building Components in Malaysia Based on Local Environment and Building Servicd Load, Fourth International Conference on Construction in the 21st Century (CITC-IV), Accelerating Innovation in Engineering, Management and Technology, Gold Coast, Australia, 11 – 13 July 2007. (International)

9) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir, Ng See King (JKR), Maisarah Ali (JKR) and Shukur Abu Hassan, Carbon Fiber Reinforced Polymer (CFRP) System For External Strengthening Of Concrete Bridge Girder, Conference on Construction Technology (CONTEC – 2001), Nexus Resort, Karambunai, Kota Kinabalu, Sabah, 11-13 October 2001. (International)

10) Jamaludin Mohamad Yatim, Azlan Abd Rahman and Abdullah Zawawi Awang, Aspek-aspek yang Diberi Penekanan Di dalam Pembinaan dan Penyenggaraan Struktur Simpanan Air, Seminar Penyelidikan Kejuruteraan Awam (SEPKA ’95), UTM, Kuala Lumpur, 15 August 1995. (National)

11) Jamaludin Mohamad Yatim, Nordin Othman and Ramli Ibrahim, Program Pembangunan Pelajar Di Kolej Kediaman: Tinjauan Di Universiti Teknologi Malaysia, Seminar Pengurusan Asrama Peringkat Kebangsaan (SPARK) 1996, Dewan Jemaah, UTM, Skudai, Johor, 18 May 1996. (National)

12) Jamaludin Mohamad Yatim, The Applications Of Advanced Composite Materials In The Construction Industry, Seminar Kejuruteraan Awam, SEMKA 2003, Faculty of Civil Engineering, UTM, Skudai, 17 August 2003. (National)

13) Jamaludin Mohamad Yatim and Ho Shu Feng, Effects Of Fibre Orientations On Single-Lap Bolted Joint Of Pultruded GFRP Plates Under Tensile Loading, Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), Hotel Sofitel, Senai, Johor, Malaysia, 5-6 July 2005. (National)

14) Jamaludin Mohamad Yatim and Azmahani Abdul Aziz, Properties Of Pultruded GFRP Composites For Structures: Experimental Study, Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), Hotel Sofitel, Senai, Johor, Malaysia, 5-6 July 2005. (National)

15) Jamaludin Mohamad Yatim, Fatimah Mohd Noor dan Azmahani Abdul Aziz, Program Peningkatan Prestasi Akademik Pelajar Di Fakulti Kejuruteraan Awam, Conference on Engineering Education (CEE 2004), Renaissance Hotel, Kuala Lumpur, Malaysia, 14-15 December 2004. (National)

16) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir, Zainai Mohamed, Effects of Tropical Weather on the Compression Properties of Pultruded GFRP Composites, 6th Asia-Pacific Structural Engineering and Construction Conference, Sri Pacific Hotel, Kuala Lumpur, Malaysia, 5-6 September 2006. (International)

17) Jamaludin Mohamad Yatim, Baharin Mesir, Azmahani Abdul Aziz dan Mohd Hidayat Jamal, Gaya Hidup Pelajar Cemerlang Dalam Persekitaran Kampus, National Student Development Conference (NASDEC) 2006, Grand Season Hotel, Kuala Lumpur, Malaysia, 8-9 August 2006. (National)

18) Jamaludin Mohamad Yatim, Baharin Mesir dan Azmahani Abdul Aziz, Kajian Peningkatan Prestasi Akademik Pelajar Melalui Program Kecemerlangan, National Student Development Conference (NASDEC) 2006, Grand Season Hotel, Kuala Lumpur, Malaysia, 8-9 August 2006. (National)

24

19) Jamaludin Mohamad Yatim, Mohamad Ismail, Wan Aizan Wan Abd Rahman and Chew Voon Yaw, Performance of Concrete Containing Effective Microorganisms (EM) Under Various Enironments, The 7th Asia Pacific Structural Engineering and Construction Conference (APSEC 2009), Awana Porto Malai, Langkawi, Kedah, Malaysia, 4-6 August 2009. (International)

20) Jamaludin Mohamad Yatim and Nur Hafizah Abdul Khalid, Tensile Behaviour of the treated and Untreated Kenaf Fibers, 2010 National Post Graduate Seminar (NAPAS 10)), Grand Blue Wave Hotel, Shah Alam, Selangor, Malaysia, 6-7 July 2010. (National)

21) Jamaludin Mohamad Yatim, Azmahani Abdul Aziz and Khairiyah Mohd Yusof, Evaluation on the Effectiveness of the Learning Outcomes from Student’s Perspectives, Regional Conference on Engineering Education & Research on Higher Education (RCEE&RHed 2010), River View Hotel, Kucing, Sarawak, Malaysia, 7-9 June 2010. (International)

22) Jamaludin Mohamad Yatim, Nur Hafizah Abdul Khalid, External Strengthening Of Reinforced Beams Using Kenaf Fiber Biocomposites Plates, Proceeding Of The National Postgraduates Seminar 2011, UITM Shah Alam, Selangor, 14-15 June 2011. (National)

23) Jamaludin Mohamad Yatim, Nur Hafizah Abdul Khalid, Reza Mahjoub, Biocomposites For The Construction Materials And Structures, Seminar on ‘Embracing Green Technology In Construction-Way Forward’, CIDB Negeri Sarawak, Kuching, Sarawak, 26 April 2011. (National)

24) Jamaludin Mohamad Yatim, Nur Hafizah Abdul Khalid, Wan Aizan Wan Abdul Rahman, Temperature Effects On Tensile Properties Of Kenaf Bast Fiber, Proceeding Of 10th International Annual Symposium (UMTAS 2011), Permai Hotel Kuala Terengganu, Kuala Terengganu. (National)

25) Mohammad Khalajmasoumi, Jamaludin Mohamad Yatim and Izni Syahrizal Ibrahim, Study On The Mechanical Properties Of Polymetric Composites Materials In Structures, Proceeding Of The 1st Iranian Students Scientific Conference In Malaysia, Universiti Putra Malaysia, Serdang. 9-10 April 2011. (National)

26) Tan Cheng Siong, Jamaludin Mohamad Yatim and Izni Syahrizal Ibrahim, Effective Microorganisms for Concrete (EMC) Admixture – Its Effects to the Mechanical Properties of Concrete, AWAM International Conference in Civil Engineering (AICCE’12), Geohazard Information Zonation (GIZ’12), Park Royal Penang Resort, 28th– 30th August 2012 (also include in conference proceedings). (International)

27) Jamaludin Mohamad Yatim, Abd Rahman Mohd Sam and Mehran Gholami, A Survey on Strengthening Steel Bridges Using CFRP Strips, AWAM International Conference in Civil Engineering (AICCE’12), University Science of Malaysia, 27-30 August 2012. (International)

28) Jamaludin Mohamad Yatim, Kenaf Potential as Malaysia’s Third Biggest Crop: Market Development and Opportunities, EU-Asia Biomass Best Practices and Business Partnering Conference 2012, Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia, 7-10 May 2012, (also include in conference proceedings). (International)

29) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir, Shukur Abu Hassan and Abd Rahman Md Sam, Behaviour of Reinforced Concrete Beams Strengthened with CFRP

25

Fabrics, Civil Engineering National Conference 2001 Univ. Sains Malaysia, Gemini Cruise, 5-8 February 2002. (National)

30) Jamaludin Mohamad Yatim and Siti Hamisah Tapsir, The Use of Fiber Reinforced Polymer (FRP) Materials in the Constuction Industry in Malaysia, Reinforced Plastic Asia 2000 (RP Asia 2000) Conference, Mandarin Hotel, Kuala Lumpur, Sept 2000. (International)

31) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir, Ng See King (JKR), Maisarah Ali (JKR) and Shukur Abu Hassan, Carbon Fiber Reinforced Polymer (CFRP) System For External Strengthening Of Concrete Bridge Girder, Kuala Lumpur, September 2000. (National)

32) Jamaludin Mohamad Yatim and Siti Hamisah Tapsir, Environmental Effects on Mechanical Properties of Glass Fibers/Polyester Composites: State-of-the-Art Review, Composites in Asia: Strategies for the Millennium, Mandarin Hotel, Kuala Lumpur, September 2000. (International)

33) Mehran Gholami, Abdul Rahman Mohd Sam and Jamaludin Mohamad Yatim, Strategies for Implementation of Bridge Management System (BMS) in Iran, The 2nd International Conference on Rehabilitation and Maintenance in Civil Engineering, 2012, (also include in conference proceedings). (International)

34) Siti Hamisah Tapsir, Shukur Abu Hassan, Abd Rahman Mohd Sam and Jamaludin Mohamad Yatim, Behaviour of Concrete Beam strengthened with CFRP Flexible Sheets, Proceedings of the Conference on Construction Technology CONTEC-2001, Kota Kinabalu, Sabah, Malaysia, 11-13 October 2001, pp. 161-168. (International)

35) Siti Hamisah Tapsir, Abd Rahman Mohd Sam, Jamaludin Mohamad Yatim, Shukur Abu Hassan and Y. L. Lee, Flexural Properties of Reinforced Concrete Beams Strengthened with Unidirectional CFRP Laminate System, National Seminar on Advanced Materials Development in Malaysia – 2001, Johor Bahru, Malaysia, 15-16th May 2001. (National)

36) Siti Hamisah Tapsir, Abd Rahman Mohd Sam, Jamaludin Mohamad Yatim, Shukur Abu Hassan and C. C. Lee, Shear Properties of Reinforced Concrete Beams Strengthened with Carbon Fibre Reinforced Polymer, National Seminar on Advanced Materials Development in Malaysia – 2001, Johor Bahru, Malaysia, 15-16th May 2001. (National)

37) Zaiton Haron, Shahrin Mohammad, Abdul Rahman Mohd Sam, Mushairry Mustaffar and Jamaludin Mohamad Yatim, The Implementation of an Open-Ended Experiment in the Civil Engineering Laboratory, The 6th International Forum on Engineering Education 2012 (IFEE 2012), Grand Seasons Hotel, Kuala Lumpur, 20th -22nd November 2012 (also include in conference proceedings). (International)

38) Azmahani Abdul Aziz, Khairiyah Mohd Yusof, Amirmudin Udin and Jamaludin Mohamad Yatim, Development of Students’ Knowledge-Behavioural Changes in Relation to Sustainability through a Case Study, The 6th International Forum on Engineering Education 2012 (IFEE 2012), Grand Seasons Hotel, Kuala Lumpur, 20th -22nd November 2012 (also include in conference proceedings). (International)

39) Azmahani Abdul Aziz, Sharipah Norbaini Syed Sheikh, Khairiyah Mohd Yusof, Amirmudin Udin and Jamaludin Mohamad Yatim, Developing a Structural Model of Assessing Students’ Knowledge-Attitudes towards Sustainability, International Conference on Teaching and Learning in Higher Education (ICTLHE 2012) in

26

conjunction with RCEE & RHED 2012, Klana Resort, Seremban, Negeri Sembilan, Malaysia, 10-12 April 2012 (also include in conference proceedings). (International)

40) Azmahani Abdul-Aziz, Khairiyah Mohd-Yusof, Amirmudin Udin, Jamaludin Mohamad Yatim, Wan-Haslina Hassan, Inculcating Awareness of Sustainable Development in First Year Engineering Students - A Comparative Study of Pedagogical Approaches, Proceedings of the Research in Engineering Education Symposium 2013, Julai 2013, Putrajaya, Kuala Lumpur. (International)

41) Azmahani Abdul-Aziz, Khairiyah Mohd-Yusof, Amirmudin Udin, Jamaludin Mohamad Yatim, A Longitudinal Study on the Impact of Cooperative Problem-Based Learning in Inculcating Sustainable Development, The 4th International Research Symposium on Problem-Based Learning (IRSPBL) 2013, Julai 2013, Putrajaya, Kuala Lumpur. (International)

42) Azmahani Abdul-Aziz, Khairiyah Mohd-Yusof, Amirmudin Udin, Adibah Abdul-Latif and Jamaludin Mohamad Yatim, Inculcating Sustainable Development among Engineering Students, Part 2: Assessing the Impact on Knowledge and Behaviour Change, International Conference of Engineering Education for Sustainable Development, Cambridge, UK, September 22 – 25, 2013. (International)

43) Nur Hafizah, A.K., Jamaludin, M.Y., Bhutta, M.A.R., Husin, M.W., Mohammad Ismail and Azman, M., Tensile Properties of Kenaf Fiber Reinforced Polymer Composites, 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013), 16-17 April 2013, UTM Skudai, Johor. (International)

44) A.R. Mohd Sam, W. Omar, A.L. Saleh, J. Mohd.Yatim and I. Mohd.Yusoff, Sustainable Horse Stable Design and Construction in Tropical Climate – UTM Experience, GEOCON 2013, Kuala Lumpur, Malaysia. (International)

45) Mehran Gholami, Abdul Rahman Mohd Sam, Jamaludin Mohamad Yatim and Bahram Marabi, Effect of Environmental Factors on Steel Structures Strengthened with Carbon Fiber Reinforced Polymer, 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013), 16-17 April 2013, UTM Skudai, Johor. (International)

46) Abdul Rahman Mohd.Sam, Mohd Hisbany Mohd Hashim, Mohd Yunus Ishak, Jamaludin Mohamad Yatim and Shukur Abu Hassan, Performance of Carbon Fibre Reinforced Polymer-Concrete Bonding System in Tropical, International Conference of Engineering, Information Technology, and Science, 2014 (ICEITS 2014) IOI Hotel & Golf Resort, Bandar Sunway, Malaysia, 4 – 5 December 2014.

47) Lam Tian Fook and Jamaludin Mohamad Yatim, The Effects of Fiber Content and Fiber Length on the Mechanical Properties of Kenaf Fibrous Concrete, The 6th International Conference of Asian Concrete Federation, 21-24 September 2014, Seoul, Korea.

48) Lam Tian Fook and Jamaludin Mohamad Yatim, Studying the Effects of Alkali Treatment on the Properties of Kenaf Fiber for Reinforced Concrete Elements, The International Conference of IPN-IWNEST, Langkawi, Malaysia, June 5-6, 2015.

49) Mahjoub, R., Yatim J.M., Mohd Sam A., Zulkarnain N.A., Raftari M., The use of Kenaf fiber reinforced polymer to confine the concrete cylinder, International Conference on Advances in Functional Materials 2015 (AFM 2015), 29 June – 3 July 2015, Stony Brook University, NY State, USA.

27

50) Jamaludin Mohamad Yatim, Abdul Rahman Mohd.Sam, Mehran Gholami and Shukur Abu Hassan, Performance of Carbon Fibre Reinforced Polymer Plate Bonding System Under Various Environmental Conditions, Proceeding of the 9th Asia Pacific Strcutural Engineering and Construction Conference (APSEC 2015) and the 8th Asean Civil Engineering Conference (ACEC 2015), 3-5 Novermber 2015, Menara Razak, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia.

51) Ogunbode Ezekiel Babatunde, Jamaludin Mohamad Yatim, Ishak Mohd Yunus and Masoud Razavi, Creep Performance of Kenaf Biofibrous Concrete Composite Under Uniaxial Compression, The 11th International Civil Engineering Postgraduate Conference - The 1st International Symposium on Expertise of Engineering Design (SEPKA-ISEED’16), 26-27 September 2016, Malaysia (ISBN 978-983-44826-9-5)

52) Hossein MohammadHosseini and Jamaludin Mohamad Yatim, Enhancement of Mechanical and Microstructure Properties of Concrete Containing Waste Carpet Fibers and Palm Oil Fuel Ash, International Conference on Science, Engineering, Management and Social Science (ICSEMSS 2016), 6-7 October 2016, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

53) Norhafizah Salleh, NoorAzlina Abdul Hamid, Abdul Rahman Mohd Sam, Jamaludin Mohamad Yatim, Rendy Thamrin, Nur hafizah A.Khalid, Masni A.Majid, Zalipah Jamellodin, Finite Element Simulation of GFRP Reinforced Concrete Beam Externally Strengthened With CFRP Plates, International Symposium on Civil and Environmental Engineering (ISCEE 2016), 5-6 December 2016, Novotel Melaka, Malaysia.

54) Norhafizah Salleh, Abdul Rahman Mohd Sam, Jamaludin Mohamad Yatim, Nur hafizah A.Khalid, NoorAzlina Abdul Hamid, Zalipah Jamellodin, Masni A.Majid, Effect of CFRP Plate Length on Flexural Behavior of GFRP Reinforced Concrete Beam Strengthening, the 2nd International Conference on Science, Technology and Social Sciences 2016 (ICSESS2016), 29May-1June 2016, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

55) Jamaludin Mohamad Yatim, Ogunbode Ezekiel Babatunde, Hazim bin Affendi, Hazlan Abdul Hamid, Azmahani Abdul Aziz and Mohd Yunus Ishak, Interfacial Bond Strength Analysis between Kenaf Fibrous Concrete Composite and Plain Concrete, The 2nd Composite Materials and Manufacturing Symposium (CMMS 2016), 13-14 November 2016, Kuala Lumpur, Malaysia.

56) Jamaludin Mohamad Yatim, Ogunbode Ezekiel Babatunde, Meisam Razavi, Hazlan Abdul Hamid, Azmahani Abdul Aziz and Mohd Yunus Ishak, The durability Performance of Kenaf Fibre reinforced polymer composites (KFRP), The 2nd Composite Materials and Manufacturing Symposium (CMMS 2016), 13-14 November 2016, Kuala Lumpur, Malaysia.

57) Ogunbode Ezekiel Babatunde, Jamaludin Mohamad Yatim, Mohd Yunus Ishak, Hazlan Abdul Hamid and Azmahani Abdul Aziz, Demeanour of Cracked Kenaf Bio Fibrous Concrete Composite under Sustained Load, International Conference on Science, Engineering, Management and Social Science (ICSEMSS 2016), 6-7 October 2016, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

58) Jamaludin Mohamad Yatim, Ogunbode Ezekiel Babatunde, Meisam Razavi, Mohd Yunus Ishak and Masoud Razavi, Review on Creep of Plain and Fibrous Concrete, the 2nd International Conference on Science, Technology and Social Sciences 2016 (ICSESS2016), 29May-1June 2016, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

28

59) Meisam Razavi, Jamaludin Mohamad Yatim, Ogunbode Ezekiel Babatunde, Masoud Razavi and Nurazura Mizal Azzmi, Compressive Properties of Kenaf/Vinylester Composite with Different Fiber Volume Content, the 2nd International Conference on Science, Technology and Social Sciences 2016 (ICSESS2016), 29May-1June 2016, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

60) Jamaludin Mohamad Yatim, Ogunbode Ezekiel Babatunde, Meisam Razavi, Mohd Yunus Ishak and Nurazura Mizal Azzmi, Preliminary Investigation of Kenaf Bio Fibrous Concrete Composites, the 2nd International Conference on Science, Technology and Social Sciences 2016 (ICSESS2016), 29May–1June 2016, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

61) Norazura Mizal Azzmi and Jamaludin Mohamad Yatim, Kenaf Fibrous Concrete: Mechanical Properties with Different Fiber Volume Fraction, International Conference on Construction and Building Engineering (ICONBUILD 2017), 15–16 August 2017, Palembang, Indonesia.

62) Azmahani Abdul Aziz, Khairiyah Mohd Yusof, Aziatulniza Sadikin, Amirmudin Udin and Jamaludin Mohamad Yatim, Effective use of Problems in Learning Environments for Attaining Environmental Sustainability Outcomes, International Conference - The World Engineering Education Forum (WEEF) 2017, 13-16 November 2017, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia.

BOOK CHAPTERS i) Jamaludin Mohamad Yatim, Abd Rahman Md Sam and Mohd Warid Hussin, Advanced

Composite Materials: Properties and Applications, Universiti Teknologi Malaysia (ISBN No.: 978-983-52-0569-9), 2008.

CHAPTERS IN BOOK i) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Ho Shu Feng, Effects of Fibre

Orientations on Single-Lap Bolted Joint of Pultruded GFRP Plates under Tensile Loading, Advanced Composite Materials: Properties and Applications, Penerbit, Universiti Teknologi Malaysia (ISBN No.: 978-983-52-0569-9), 2008.

ii) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Zainai Mohamed, Environmental Effects on Mechanical Properties of GFRP Composites: An Overview, Advanced Composite Materials: Properties and Applications, Universiti Teknologi Malaysia (ISBN No.: 978-983-52-0569-9), 2008.

iii) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Zainai Mohamed, Behaviour of Pultruded GFRP Composites Under Tensile and Compressive Loading, Advanced Composite Materials: Properties and Applications, Universiti Teknologi Malaysia (ISBN No.: 978-983-52-0569-9), 2008.

iv) Jamaludin Mohamad Yatim and Azmahani Abdul Aziz, Properties of Pultruded GFRP Composites for Structures: Experimental Study in Advanced Composite Materials: Properties and Applications, Penerbit Universiti Teknologi Malaysia (ISBN No.: 978-983-52-0569-9), 2008.

v) Azmahani Abdul-Aziz, Khairiyah Mohd-Yusof, Amirmudin Udin, Jamaludin Mohamad Yatim, A Longitudinal Study on the Impact of Cooperative Problem-Based Learning in

29

Inculcating Sustainable Development, PBL Across Cultures, Aalborg University Press, Denmark, 2013.

MONOGRAPHS i) Jamaludin Mohamad Yatim and Nur Hidayah Abdul Hassan, “Durability Of Polymer

Composite Materials For Structures”, Penerbit Universiti Teknologi Malaysia, (ISBN No.: 978-967-353-597-2), 2008.

ii) Jamaludin Mohamad Yatim and Liew Shan Chin, “Analysis And Design Of Glass Fibre Reinforced Polymer (Gfrp) Portal Frame”, Penerbit Universiti Teknologi Malaysia, (ISBN No.: 978-967-353-605-4), 2008.

iii) Jamaludin Mohamad Yatim and Mohd Firdaus Haji Mat Ali, “Kesan Mikroorganisma Efektif (EM) Ke Atas Pretasi Konkrit”, Penerbit Universiti Teknologi Malaysia, (ISBN No.: 978-967-353-743-3), 2008.

iv) Jamaludin Mohamad Yatim and Nor Azlina Abdul Manaf, “Kelakuan Beban Pesongan Struktur Kekuda Komposit Gfrp- Teori Dan Eksperimen”, Penerbit Universiti Teknologi Malaysia, (ISBN No.: 978-967-353-744-0), 2008.

v) Jamaludin Mohamad Yatim and Fauzi Bin Toed, “Analisis Punca-Punca Kegagalan Struktur Di Malaysia”, Penerbit Universiti Teknologi Malaysia (ISBN No.: 978-967-353-751-8), 2008.

vi) Jamaludin Mohamad Yatim and Nortilawati Osman, “Kesan Sisa Buangan Polimer Ke Atas Sifat-Sifat Konkrit”, Penerbit Universiti Teknologi Malaysia (ISBN No.: 978-967-354-072-3), 2008.

vii) Jamaludin Mohamad Yatim and Lim Fei Fei, “Analysis And Design Of Gfrp Truss”, Penerbit Universiti Teknologi Malaysia (ISBN No.: 978-967-354-049-5), 2008.

STANDARDS/CODE OF PRACTICES i) Jamaludin Mohamad Yatim and members in the Technical Committee on Bricks and

Blocks, “Malaysian Standard, MS 2280:2010, “Aggregate for Mortar – Specification”, Standard/Code of Practice, Department of Standards Malaysia and SIRIM Bhd (ICS: 91.100.15), 2010.

ii) Jamaludin Mohamad Yatim and members in the Technical Committee on Bricks and Blocks, “Malaysian Standard, MS 2281:2010, “Clay and Calcium Silicate Bricks of Special Shapes and Sizes – Recommendations”, Standard/Code of Practice, Department of Standards Malaysia and SIRIM Bhd (ICS: 91.100.15), 2010.

iii) Jamaludin Mohamad Yatim and members in the Technical Committee on Bricks and Blocks, “Malaysian Standard, MS 2282-3:2010, “Masonry Unit – Specification – Part 3: Aggregate Concrete Masonry Units (Dense and Light – Weight Aggregates) (Second Revision)”, Standard/Code of Practice, Department of Standards Malaysia and SIRIM Bhd (ICS: 91.100.30), 2010.

iv) Jamaludin Mohamad Yatim and members in the Working Group Committee on Precast Concrete Masonry Units, “Malaysian Standard, MS 2402:2011, “Precast Concrete Masonry Units – Guide for Specifying Precast Concrete Masonry Units”, Standard/Code of Practice, Department of Standards Malaysia and SIRIM Bhd (ICS: 91.100.30), 2011.

30

v) Jamaludin Mohamad Yatim and members in the Working Group Committee on Eco-labelling of Biocomposites in Construction, “Malaysian Standard, MS 2456:2012, “Eco-Labelling Criteria for Biofibre Polymer Composites – Construction Applications”, Standard/Code of Practice, Department of Standards Malaysia and SIRIM Bhd (ICS: 13.020.50), 2012.

vi) Jamaludin Mohamad Yatim and members in the Technical Committee on Bricks and Blocks, “Malaysian Standard, MS 2529:2013, “Flexibility Sheets for Waterproofing – Bitumen Damp Proof Courses – Definitions and Characteristics”, Standard/Code of Practice, Department of Standards Malaysia and SIRIM Bhd (ICS: 91.100.50), 2013.

vii) Jamaludin Mohamad Yatim and members in the Technical Committee on Bricks and Blocks, “Malaysian Standard, MS 2282-6:2013, “Masonry Units – Specification – Part 6: Natural Stone Masonry Units”, Standard/Code of Practice, Department of Standards Malaysia and SIRIM Bhd (ICS: 91.100.15), 2013.

viii) Jamaludin Mohamad Yatim and members in the Working Group Committee on Concrete Roofing Tiles, “Malaysian Standard, MS 2596-1:2014, “Concrete Roofing Tiles and Fittings for Roof Covering and Wall Cladding – Part 1: Specification (First Revision)”, Standard/Code of Practice, Department of Standards Malaysia and SIRIM Bhd (ICS: 91.100.30), 2014.

ix) Jamaludin Mohamad Yatim and members in the Working Group Committee on Concrete Roofing Tiles, “Malaysian Standard, MS 2596-2:2014, “Concrete Roofing Tiles and Fittings for Roof Covering and Wall Cladding – Part 2: Test Methods (First revision)”, Standard/Code of Practice, Department of Standards Malaysia and SIRIM Bhd (ICS: 91.100.30), 2014.

x) Jamaludin Mohamad Yatim and members in the Working Group Committee on Concrete Roofing Tiles, “Malaysian Standard, MS 2596-3:2014, “Concrete Roofing Tiles and Fittings for Roof Covering and Wall Cladding – Part 3: Installation for Roof Covering (First revision)”, Standard/Code of Practice, Department of Standards Malaysia and SIRIM Bhd (ICS: 91.100.30), 2014.

TRANSLATED BOOK i) Jamaludin Mohamad Yatim and group members, “Structures Laboratory Guidance Book

– Teaching Modul (Experimental Work)”, Faculty of Civil Engineering, UTM, June 2003. EXPERT REPORT i) Jamaludin Mohamad Yatim, Experimental Study on High Density Polyethylene Rice

Husk Biocomposites for Structural Systems, Technical/Research Report (FRGS VOT 78507), Ministry of Higher Education, page 163, Dec 2012.

ii) Jamaludin Mohamad Yatim, Properties of Kenaf Fibers Polymer Composites for Structures, Technical/Research Report (IRGS VOT 78934), Research Management Center, Universiti Teknologi Malaysia, page 102, Oct 2010.

iii) Jamaludin Mohamad Yatim, Characterization and Effects on the Effective Micro-organism (EM) and Industrial Waste (IW) Materials as a Partial Mixture in Concrete, Technical/Research Report (FRGS VOT 78020), Ministry of Higher Education, page 150, Feb 2009.

31

iv) Jamaludin Mohamad Yatim, Characterization of Natural Fiber/Bio-fiber Polymer Composites for Structures, Technical/Research Report, Research University Grant (GUP Tier 1) (VOT Q.J1300000.7122. 00H83), RMC UTM, April 2013.

v) Jamaludin Mohamad Yatim, Kenaf Biocomposites for Construction Materials, Technical/Research Report, collaborated with local industry (Everise Crimson (M) Sdn Bhd), MOHE – Knowledge Transfer Programme Flagship (VOT R.J130000.7822.4L505) – August 2015.

vi) Jamaludin Mohamad Yatim and Shukur Abu Hassan, PUSKOM Berjaya Bina Tangki Air GFRP Di Pulau Sibu, Skudai Post, Universiti Teknologi Malaysia, page 9, March 2000.

vii) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Shukur Abu Hassan, UTM dan JKR Pelopori Teknik Penguatan Jambatan Konkrit Guna CFRP Pertama Di Malaysia, Skudai Post, Universiti Teknologi Malaysia, page 9, July 2000.

viii) Jamaludin Mohamad Yatim, Gentian Kenaf Ganti Keluli Untuk Binaan, Article in Berita Harian (Edisi Johor), page 1, June 2012.

ix) Jamaludin Mohamad Yatim, Kenaf Dijadikan Bahan Binaan”, Article in Berita Harian (Varsiti Inovasi), Bil 137, 30 June 2012.

THESIS i) Jamaludin Mohamad Yatim, Performance of Pultruded GFRP Composites under

Tropical Climate, Ph.D. Thesis, Universiti Teknologi Malaysia, Johor, Malaysia (2002) ii) Jamaludin Mohamad Yatim, The Study on Concrete Softening: Theory and Experiment,

Master Project/Thesis, Universiti Teknologi Malaysia, Johor, Malaysia (1993).

PLENARY LECTURE / KEYNOTE ADDRESS / INVITED / GUEST SPEAKER i) Guest Speaker, Title “The Applications Of Advanced Composite Materials In The

Construction Industry, Seminar Kejuruteraan Awam (SEMKA 2003), Faculty of Civil Engineering, UTM, Skudai, Johor, Malaysia (17 August 2003)

ii) Keynote Address, Title: “Student Development Programmes”, National Student Development Conference (NASDEC) 2006, Grand Season Hotel, Kuala Lumpur, Malaysia (8 – 9 August 2006)

iii) Speaker, Title: “Behaviour of Pultruded GFRP Under Tensile and Compressive Loading”, The 5th Asia Pacific Structural Engineering and Construction Conference (APSEC 2003), Hyatt Hotel, Johor Bahru, Johor, Malaysia (International) (26 – 28 August 2003)

iv) Speaker, Title: “Evaluation of Building Performance Using Artificial Neural Network: Study on Service Life Planning in Achieving Sustainability, The Eight International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, Hotel Villa Pamphili, Rome, Italy, (International) (30 August – 2 September 2005)

v) Invited Speaker, Panel Forum on “Kecemerlangan Mahasiswa” at Kolej Tun Razak, Academic and International Office, UTM, Skudai, Johor (Sept 2009)

vi) Invited Speaker, Title “Biocomposites For The Construction Materials And Structures”, Workshop on ‘Embracing Green Technology In Construction-Way Forward’,

32

Construction Industry Development Board (CIDB), Grand Margherita Hotel, Kuching, Sarawak (26 April 2011)

vii) Keynote Address, Title: “Development of Malaysian Standard, MS 2596:2014; Concrete Roofing Tiles and Fittings for Roof Covering and Wall Cladding”, Seminar on MS 2596:2014 - Concrete Roofing Tiles and Fittings for Roof Covering and Wall Cladding, Organised by SIRIM Bhd, Concorde Hotel, Shah Alam, Selangor (9 June 2015)

viii) Invited Speaker, Title “Malaysian Standard, MS 2596-1:2014, “Concrete Roofing Tiles and Fittings for Roof Covering and Wall Cladding – Part 1: Specification (First Revision)”, Seminar on MS 2596:2014, SIRIM Bhd, Concorde Hotel, Shah Alam, Selangor (9 June 2015)

ix) Invited Speaker, Title “Malaysian Standard, MS 2596-2:2014, “Concrete Roofing Tiles and Fittings for Roof Covering and Wall Cladding – Part 2: Test Methods (First revision)”, Seminar on MS 2596:2014, SIRIM Bhd, Concorde Hotel, Shah Alam, Selangor (9 June 2015)

x) Invited Speaker, Title “Malaysian Standard, MS 2596-3:2014, “Concrete Roofing Tiles and Fittings for Roof Covering and Wall Cladding – Part 3: Installation for Roof Covering (First revision)”, Seminar on MS 2596:2014, SIRIM Bhd, Concorde Hotel, Shah Alam, Selangor (9 June 2015)

xi) Plenary Speaker, Panel Forum on Malaysian Standard, MS 2596-3:2014, “Concrete Roofing Tiles and Fittings for Roof Covering and Wall Cladding”, Seminar on MS 2596:2014, SIRIM Bhd, Concorde Hotel, Shah Alam, Selangor (9 June 2015)

xii) Plenary Speaker, Panel Forum on “Dialog: Ke mana Halatuju Kenaf?”, National Kenaf and Tobacco Board, Seri Pacific Hotel, Jalan Putra, Kuala Lumpur (30 August 2012)

xiii) Invited Speaker, Title: “First Year Experience and Campus Live”, Special Lecture to First Year Undergraduate Student, FKA, UTM (4 September 2012)

xiv) Invited Speaker, Title: “Civil Engineering and the Future”, Special Lecture to Express UTM-MARA Undergraduate Student, UTM (8 January 2005)

xv) Invited Speaker, Short Course on Research Methodology for Postgraduate Programme, FKA (12 August 2009)

xvi) Speaker, Title: “Durability of Fiber Reinforced Polymer Composites for Infrastructures in tropical Regions: Physical Studies”, Reinforced Plastic Asia 2000 (RP Asia 2000), Kuala Lumpur (International) (20 – 22 Sept 2000)

REFEREED CONFERENCES i) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Zainai Mohamed, Durability of

Fiber Reinforced Polymer Composites for Infrastructures in Tropical Region: Physical Studies, Reinforced Plastics Asia 2000 Conference, The Mandarin Oriental, Kuala Lumpur, 21-22 September 2000. (International)

ii) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Zainai Mohamed, Behaviour of Pultruded GFRP Composites Under Tensile and Compressive Loading, 5th Asia Pacific Structural Engineering And Construction Conference, Hyatt Hotel, Johor Bahru, Johor, Malaysia, 26-28 August 2003. (International)

iii) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Fathoni Usman, Evaluation of Building Performance Using Artificial Neural Network: Study on Service Life Planning

33

in Achieving Sustainability, The Eight International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, Hotel Villa Pamphili, Rome, Italy, 30 August – 2 September 2005. (International)

iv) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Fathoni Usman, Towards Better Housing Management: Service life Planning in Achieving Sustainability for Affordable Housing, The Tenth International Conference on Civil, Structural and Environmental Engineering Computing, Hotel Villa Pamphili, Rome, Italy, 30 August – 2 September 2005. (International)

v) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Fathoni Usman, An Artificial Neural Network Approach in Service Life Prediction of Building Components in Malaysia Based on Local Environment and Building Servicd Load, Fourth International Conference on Construction in the 21st Century (CITC-IV), Accelerating Innovation in Engineering, Management and Technology, Gold Coast, Australia, 11 – 13 July 2007. (International)

vi) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir, Zainai Mohamed, Effects of Tropical Weather on the Compression Properties of Pultruded GFRP Composites, 6th Asia-Pacific Structural Engineering and Construction Conference, Sri Pacific Hotel, Kuala Lumpur, Malaysia, 5-6 September 2006. (International)

vii) Jamaludin Mohamad Yatim, Mohamad Ismail, Wan Aizan Wan Abd Rahman and Chew Voon Yaw, Performance of Concrete Containing Effective Microorganisms (EM) Under Various Enironments, The 7th Asia Pacific Structural Engineering and Construction Conference (APSEC 2009), Awana Porto Malai, Langkawi, Kedah, Malaysia, 4-6 August 2009. (International)

viii) Jamaludin Mohamad Yatim, Kenaf Potential as Malaysia’s Third Biggest Crop: Market Development and Opportunities, EU-Asia Biomass Best Practices and Business Partnering Conference 2012, Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia, 7-10 May 2012, (also include in conference proceedings). (International)

ix) Lam Tian Fook and Jamaludin Mohamad Yatim, The Effects of Fiber Content and Fiber Length on the Mechanical Properties of Kenaf Fibrous Concrete, The 6th International Conference of Asian Concrete Federation, 21-24 September 2014, Seoul, Korea.

x) Azmahani Abdul-Aziz, Khairiyah Mohd-Yusof, Amirmudin Udin, Adibah Abdul-Latif and Jamaludin Mohamad Yatim, Inculcating Sustainable Development among Engineering Students, Part 2: Assessing the Impact on Knowledge and Behaviour Change, International Conference of Engineering Education for Sustainable Development, Cambridge, UK, September 22 – 25, 2013. (International)

xi) Mahjoub, R., Yatim J.M., Mohd Sam A., Zulkarnain N.A., Raftari M., The use of Kenaf fiber reinforced polymer to confine the concrete cylinder, International Conference on Advances in Functional Materials 2015 (AFM 2015), 29 June – 3 July 2015, Stony Brook University, NY State, USA.

xii) Jamaludin Mohamad Yatim, Abdul Rahman Mohd.Sam, Mehran Gholami and Shukur Abu Hassan, Performance of Carbon Fibre Reinforced Polymer Plate Bonding System Under Various Environmental Conditions, Proceeding of the 9th Asia Pacific Strcutural Engineering and Construction Conference (APSEC 2015), 3-5 Novermber 2015, Menara Razak, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia.

xiii) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Zainai Mohamed, Behaviour of

34

Pultruded GFRP Under Tensile and Compressive Loading, The 5th Asia Pacific Structural Engineering and Construction Conference 2003 (APSEC 2003), 2-4 September 2003, Johor Bahru, Johor, Malaysia.

xiv) Jamaludin Mohamad Yatim, Siti Hamisah Tapsir and Zainai Mohamed, Effects of Tropical Weather on the Compression Properties of Pultruded GFRP Composites, The 6th Asia Pacific Structural Engineering and Construction Conference 2006 (APSEC 2006), 15-17 August 2006, Kuala Lumpur, Malaysia.

SEMINARS / WORKSHOP / COURSES 1) Course on Lecturer Teaching Skill, Training Unit UTM, UTM Skudai, Johor, 1989. 2) ISO 9002 Workshop, Faculty of Civil Engineering, UTM, Guoman Resort, Negeri

Sembilan, 2003. 3) Kursus Pembinaan Struktur dan Pengawasan Untuk Pegawai Profesional, Institut

Kerja Raya Malaysia (IKRAM), IKRAM Training Centre, Kajang, Selangor, 1995. 4) Course on Fibres Reinforced Composites Technology (Introduction and Advance),

SIRIM Berhad, SIRIM Training Hall, Shah Alam, Selangor, 1996. 5) Course on ISO 9002:2002 (Pengurusan Akademik), Faculty of Civil Engineering, UTM,

Seminar Room, UTM Johor Bahru, December 2002. 6) Problem Based Learning Workshop, Centre for Teaching and Learning (CTL), UTM, at

Dewan Jamuan, UTM, Skudai, 20 May 2003. 7) Course on Penilaian Tahap Kecekapan (PTK TK4), Registrar Office, UTM Johor

Bahru, 8 – 23 December 2003. 8) Workshop on Generic Skills and Attribute of UTM Graduates, Academic Secretariat

Office of UTM, Renaissance Hotel, Melaka, 17 – 20 March 2004. 9) Course on Pengumpulan Data Projek Penyelidikan Perumahan Termampu –

Pendekatan Kos Kitaran Hayat Rekabentuk Perumahan di Malaysia – Phase II, RMC UTM, UTM City Campus, Kuala Lumpur, 30 – 31 July 2002.

10) Workshop on Mengemaskini Tatacara Tatatertib Pelajar UTM, Office of Student Affairs UTM, City Bayview Hotel, Melaka, 17 – 19 July 2003.

11) Workshop on Teaching Portfolio, organised by Faculty of Civil Engineering UTM at Riviera Bay Resort, Malacca, 9 – 10 May 2003.

12) Kursus Kemahiran Kaunseling Pelajar dan Pembimbing Rakan Sebaya, Office of Student Affairs UTM, Jemaah/Senate Hall, UTM Johor Bahru, 23 – 24 April 1995.

13) Academic Staff Motivation Camp, Faculty of Civil Engineering UTM, Kolej Uniti, Pasir Panjang, Negeri Sembilan, 9 – 11 April 2002.

14) Workshop on Terjemahan Buku Panduan Makmal II (English Version), Faculty of Civil Engineering UTM, Computer Laboratory D02, 6 – 7 May 2003.

15) Induction Course on Safety and Health for Construction Workers (Green Card), CIDB Southern Branch, UTM Skudai, 22 May 2003.

16) Bengkel Peranan Kolej Kediaman Dalam Pemajuan Prestasi Mahasiswa 2004, Department of Student Affairs, Universiti Malaysia Sabah and MAPUM, Hyatt Regency Kinabalu, Sabah, 11-14 February 2004.

35

17) Course on The Introduction to Technology Entrepreneurship and Enterprise Development, UTM, Jasmin Seminar Room, CEPP, UTM Skudai, 20-22 July 2004.

18) Course on Penilaian Tahap Kecekapan (PTK TK5), Registrar Office UTM, Ibnu Sina Institute, UTM Skudai, 15 – 23 Disember 2005.

19) Kursus Asas Keselamatan Kebakaran, UTM and Jabatan Bomba dan Penyelamat, Pusat Latihan Bomba dan Penyelamat, Bandar Penawar, Kota Tinggi, Johor, 6 – 8 May 2005.

20) Workshop on Academician's Route to Chartered via ICE, Faculty of Civil Engineering, UTM, Skudai, Johor, 15 February 2015.

21) Basic E-Learning@UTM Course, Computer Laboratory of CTL, Centre For Teaching and Learning, UTM, Johor Bahru, Johor, 30 August 2015.

22) Workshop on Strategic Planning of Centre For Composites (CFC), Telok Gorek Bay Resort, Tanjung Resang, Mersing, Johor, 18-20 January 2015.

23) The Course on Seismic Design of Structures in Accordance to Eurocode 8, IEM Southern Branch and Board of Engineer Malaysia, The Grand Peragon Hotel, Johor Bahru, Johor, 6-7 November 2015.

24) Course on Service Learning, Workshop room, Centre for Teaching and Learning (CTL), UTM Johor Bahru, 11 April 2016.

25) Course on Internal Academic Auditor, Centre for Academic Leadership and Centre for Quality and Risk Management, UTM, Ballroom Training Centre, UTM Johor Bahru, 27-28 June 2016.

26) Kursus Audit Premis, Centre for Quality and Risk Management, UTM, Bilik Jamuan, Aras 2, Dewan Sultan Iskandar, UTM Johor Bahru, 3 November 2016.

27) Workshop on CDIO Learning Innovation, Centre for Teaching and Learning (CTL), PBL Room 1 & 2, Block M46, Faculty of Civil Engineering, UTM, 20 Ogos 2014.

28) Course on Code of Ethics/Regulations, IEM Southern Branch and Board of Engineer Malaysia, CTL Hall, UTM Johor Bahru, 25-26 August 2014.

29) Course on Health, Safety and Environment (HSE), IEM Southern Branch and Board of Engineer Malaysia, CTL Hall, UTM Johor Bahru, 18-19 August 2014.

30) Course on Teknologi Web 2.0 bagi Tujuan Pengajaran dan Pembelajaran, Centre for Teaching and Learning (CTL), Computer Laboratory 1, CTL, 5 December 2012.

Sincerely yours, ASSOCIATE PROFESSOR DR JAMALUDIN BIN MOHAMAD YATIM, Department of Structures and Materials, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81110 Johor Bahru, Johor, MALAYSIA

Date post:	11-Mar-2019
Category:	Documents
Upload:	hatuong
View:	247 times
Download:	0 times

CV PM Dr Jamaludin Mohamad Yatim Dec...

Documents