AMERICAN STANDARDCYGNET CLOSE COUPLED BACK TO WALL TOILET SUITE (BACK INLET)
CLEANING RECOMMENDATIONS
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions and setouts listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.Tech Page Version 1
To see the complete AMERICAN STANDARD range go to www.reece.com.au/bathrooms
Inlet Valve Recommended maximum working pressure 500kpa
Seat Soft Close Quick Release Seat
Rim Configuration Box Rim
Bowl Configuration
Cistern Fixing Bolted directly to pan
Pan Fixing Screwed to the floor using brackets (supplied)and bedded with sealant
SPECIFICATIONSRecommended use Domestic, Hotel & Commercial
Dimensions are nominal measurements only.
Material Pan: Vitreous China Cistern: Vitreous ChinaSeat: Polypropylene
Colour Pan: WhiteCistern: WhiteSeat: White
Weight Pan: 34 kgCistern: 13 kg
Water Inlet Position Back Inlet
Note: Ensureback inletconnectionextends 40mmfrom �nishedwall.
40mm
page 1 of 4
P trap (converts to S Trap using plastic s bendprovided)
190
270
TM
WMKA21023AS 1172
835
140-270
400
680
353
Back inlet hole 415
700
125
381
760
240
We recommend the use of soapy water or approved cleaners.This product should not be cleaned with abrasive materials.Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.
The more stars the more water efficient
WATER RATINGwww.waterrating.gov.au
In accordance with AS/NZS 6400
Licence No. 0050LIXIL (Thailand) Public Company Limited
4.5 L per full flush / 3 L per half flush
3.5 litres average flush
INSTALLATION INSTRUCTIONS
page 2 of 4
Ø10
Ø5
Ø10
Ø22
Unit: mm
700/760
40125
140~159
160~270
140~270
70
CONNECTOR CUTOUT (B)
ROUGHING - IN (A)140-150 mm.151-159 mm.
10 mm.20 mm.
160-170 mm.171-180 mm.181-190 mm.191-200 mm.201-210 mm.
30 mm.40 mm.50 mm.60 mm.70 mm.
211-220 mm. 80 mm.221-230 mm.
~ ~
261-270 mm.
90 mm.
130 mm.
CONNECTOR CUTOUT (B)
ROUGHING - IN (A)
CONNECTOR CUTOUT (B)
ROUGHING - IN (A)
C=116 - (A-160)
190
B
A
190
BC
A
5a 5b
6a
6b
AMERICAN STANDARDCYGNET CLOSE COUPLED BACK TO WALL TOILET SUITE (BACK INLET)
INSTALLATION INSTRUCTIONS
PUSH BUTTON ASSEMBLY AND ADJUSTMENT
page 3 of 4
9 10
1211
13 14
Ø22
190
AMERICAN STANDARDCYGNET CLOSE COUPLED BACK TO WALL TOILET SUITE (BACK INLET)
12
Loosen lock nutTighten lock nut
Adjustment
Lock out
Full flush
Half flush
Ensure button rods are aligned with full & 1/2 flush on outlet valve.
SPARE PARTS
1
3
2
6
45
7
8
9
a
b
FLUSH BUTTON KIT1 - 9504479
2 - 103510 MINI STOP CHROME 15MM
BUFFER KITa - 9505886
b - 9505887 SEAT HINGE KITINCLUDES - FIXING KIT & SOFT CLOSE REPLACMENT KIT
FLEX HOSE WATER (PVC) 1/2"ELB 300MMDUAL FLUSH OUTLET VALVE COMPLETE
4 - 1817018
3 - 107616
5 - 9500475 SIDE/BACK INLET VALVE
TOP FIX CISTERN BOLTS (PAIR)6 - 9504528
7 - 9506467 CC CISTERN TO PAN RUBBER SEALPAN BEND8 - 9503902
9 - 9500851 PAN FIXING BRKT &COVER
AMERICAN STANDARDCYGNET CLOSE COUPLED BACK TO WALL TOILET SUITE (BACK INLET)