D SECTION RUBBER FENDER

Nanjing Deers Industrial CO.,LTD

Nanjing Deers Industrial CO.,LTD• http://www.ChinaRubberFender.com/product/semi-cylindrical-fender.html

Description:

D section rubber fender can be pre-curved drilled, chamfered and cut to specific lengths to aid application and installation . The D section rubber fender is produced through and we have a range of standard sizes.They also offer the excellent physical characteristics needed to handle the high loading which occurs both on initial contact, and throughout the service cycle

Deers Industrial CO.,LTD• http://www.ChinaRubberFender.com/product/semi-cylindrical-fender.html

Application:

Nanjing Deers Industrial CO.,LTD• http://www.ChinaRubberFender.com/product/semi-cylindrical-fender.html

•

•

•

•

•

Features:

Nanjing Deers Industrial CO.,LTD• http://www.ChinaRubberFender.com/product/semi-cylindrical-fender.html

•Low weight•to the smaller bottom width.•easy installation & maintenance.•Applicable for frame docks due•Cheap and economic.

Pictures:

Nanjing Deers Industrial CO.,LTD• http://www.ChinaRubberFender.com/product/semi-cylindrical-fender.html

Specification:

Nanjing Deers Industrial CO.,LTD• http://www.ChinaRubberFender.com/product/semi-cylindrical-fender.html