D Surfacing Finishing Tools - ehwadiamondusa.com · Surfacing & Finishing Tools DIAMOND 2014 ......

FOR OPTICS LABS

Surfacing & Finishing Tools

DIAMOND

20142015CATALOG

Since 1975, EHWA® has been able to greatly expand its market

share throughout the world by establishing world renowned

reputation of high quality products, service and expertise in

the industry. EHWA® is deeply committed to supplying

customers with the most, up-to-date, competitive products

and technical information. Our success is measured by the

success of our customers.

EHWA® has become an international benchmark for success

because of our ability to adapt quickly to changing markets

and diverse customer needs, EHWA® is leading the way in

applying the most advanced technology for manufacturing

industrial diamond tools.

The key to our �exibility and strength in the global marketplace

is our many alliances with reliable overseas partners and

customers throughout the world. EHWA® purchases only the

highest quality raw materials, industrial diamond and CBN from

reputable sources. In addition to having a robust supply chain

with major suppliers, EHWA® has successfully teamed up with

high-tech manufacturers in Europe, Japan, and U.S. under

several joint-ventures for the research and development of high

precision diamond tools, rotary dressers, and precision

electroplated diamond tools.

The success of a company depends on its ability to adapt

and compete in the global marketplace. EHWA® is able to

thrive in the age of globalization due to our sustainable global

strategy. EHWA® and our high- quality diamond tools are your

partner for success!

2014 - 2015

CONTENTS

COBURN® TECHNOLOGIES... 5

MEI®.............................. 6-8

OPTRONICS................. 9-10

SANTINELLI®....................... 11

SATISLOH®................... 12-14

SCHNEIDER................ 15-16

ORDER FORM.................. 17

TOOLS OFFERED FOR THE FOLLOWING MACHINE TYPES:

#1

#2

#3

#4

#5

#6

#7

MEI® is a registered trademark of MEI S.r.l.Optronics® is a registered trademark of National Optronics, Inc.Santinelli® is a registered trademark of Santinelli, Int.Satisloh® is a registred trademark of Satisloh AGSchneider® is a registered trademark of Schneider GmbH & Co.KG

At EHWA® our 40 year heritage of building diamond products for industrial applications

has allowed us to develop expertise in all types of Diamond technologies available today:

GRAPHITE

DIAMOND

( HIGH PRESSURE HIGH TEMPERATURE )

=

SYNTHETIC DIAMOND ADVANTAGES VS. NATURAL DIAMOND02

Monocrystalline Diamonds (MCD)

Synthetically produced single crystal diamonds that

replicate Natural Diamonds in structure but consistently yield

higher performance with their enhanced consistency,

with improved machining properties, similar life,

and lower machining costs per unit.

Polycrystalline Diamonds (PCD)

Synthetically produced in varying grades designed

for speci�c applications. EHWA® uses 5 grades

speci�c to the Optical Industry that provide

excellent machining properties and life resulting

in the lowest possible machining costs for the end user.

ADVANTAGES OF PCD - POLYCRYSTALINE DIAMOND CUTTING TOOLS

GoodThermal

Conductivity

Superior Edge

Strength

Less Built Up

Edges

LOWEST COST

PER LENS!

Excellent Wear

Resistance

Good for High Speed Machining

Superior Hardness

03EXAMPLE OF EHWA® FINISHING TEST

Average Number of lenses17,50015,00012,50010,000

7,5005,0002,500

0

15,000

500

Carbide PCD

ADVANTAGES OF EHWA® AS YOUR CUTTING TOOL PARTNERWith multiple grades of substrates o�ered, many years of PCD cutting tool experience, and a large team of skilled engineers, EHWA is uniquely positioned to be your cutting tool solutions provider!

EXAMPLE OF EHWA® PCD SUBSTRATE GRADES USED FOR CUTTING TOOLS

Diamond Value Grain Size Type Grit Size 80-90 0.5 µm Wc Backed Ultra Fine 90 4 µm Wc Backed Fine 90 10 µm Wc Backed Mudium 90 25 µm Wc Backed Coarse 90 30 + 2 µm Wc Backed Multi Modal

Given Polcrystaline Diamond's (PCD) superior hardness to Carbide, cutting tool life is signi�cantly increased over carbide cutting tools used in the same applications. The stengths of PCD are;

GT- 1126200

1126200Call Us

PCD Cutter for IQ CNCLensmaker & IQ SC2 (8mm)

COBURN® TECHNOLOGIES

® ® ®

®04

MEI®

®05

GT-F01015-MD-R-DX

MEI® MEI® MEI®

F01015-MD-R-DX F01041-MD-R-DX

TC-EMX RoughingTool 3mm Right

PCD-EMX BevelingTool 45/60o Right

PCD-EMXRight Shank

GT-F01041-MD-R-DX GT-F01072-PCD-DX

F01072-PCD-DX

® ® ®

MEI®

®06

® ® ®

MEI®

®06TC-EMF1 Roughing Tool

4 mm + Safety BevelTC-DRS1

1.0 mm Carbide

GT-F01062-MD-R-DX

F01007-MD-DX F01062-MD-R-DX

GT-F01007-MD-DX

Machine

Part Number

Description

Manufacturer Part Number

Machine

Part Number

Description


* ( All cutters are availablein either right or left hand)

Machine

Part Number

Description


®® ®®

®® Machine

Part Number

Description


®®

07 MEI®

®

o

F01071-PCD-DX

GT-F01071-PCD-DX GT-F01060-DX-GR3

OPTRONICSALL PARTS MADE FOR OPTRONICS

Optronics

GT-PCD-04-1001

PCD-TSX(114o - 6.65 C/L)

PCD-TSX(Hi Wrap 1 30/54o)

Satisloh # 92-008-00

PCD-TSX (Hi Wrap 2 40/44o)

Satisloh # 92-007-893

Call Us

Part Number

Description


Machine

08

Optronics

93342

GT-93342

Machine

Part Number

Description


Optronics

93344

GT-93344

Machine

Part Number

Description


OPTRONICSALL PARTS MADE FOR OPTRONICS09

Optronics

GT-93761

PCD-EMXPolycrystalline DiamondCutter (Two Flute Cutter)

93761

Part Number

Description


Machine Optronics

Call Us

GT-MD-04-1011

MD-1EE6Y(Polish Wheel Taper)

20.5 mm Diameter

Machine

Part Number

Description


Optronics

GT-MD-04-1012

Call Us

MD-1EE6Y(Polish Wheel Bevel)

20.5 mm Diameter

Machine

Part Number

Description


OPTRONICSALL PARTS MADE FOR OPTRONICS

Optronics

GT-PCD-04-1001

PCD-TSX(114o - 6.65 C/L)

PCD-TSX(Hi Wrap 1 30/54o)

Satisloh # 92-008-00

PCD-TSX (Hi Wrap 2 40/44o)

Satisloh # 92-007-893

Call Us

Part Number

Description


Machine

08

Optronics

93342

GT-93342

Machine

Part Number

Description


Optronics

93344

GT-93344

Machine

Part Number

Description


OPTRONICSALL PARTS MADE FOR OPTRONICS09

Optronics

GT-93761

PCD-EMXPolycrystalline DiamondCutter (Two Flute Cutter)

93761

Part Number

Description


Machine Optronics

Call Us

GT-MD-04-1011

MD-1EE6Y(Polish Wheel Taper)

20.5 mm Diameter

Machine

Part Number

Description


Optronics

GT-MD-04-1012

Call Us

MD-1EE6Y(Polish Wheel Bevel)

20.5 mm Diameter

Machine

Part Number

Description


ALL PARTS MADE FOR SANTINELLI®10 SANTINELLI®

Santinelli® Santinelli®

40291-M007

GT-40291-M007

BSL-460375-1RS Rougher 60 grit (Right)

Machine

Part Number

Description


40291-M002 (Left)40291-M004 (Right)

GT-40291-M002GT-40291-M004

MD-1EE6Y LS/RSMD-1EE6Y LS 112o Straight D400

MD-1EE6Y RS 112o Straight D4000

Machine

Part Number

Description


40291-M031 (Right)40291-M032 (Left)

GT-40291-M031GT-40291-M032

MD-1EE6Y 35o BevelRS D400 / LS D3000

Machine

Part Number

Description


40291-M003 (Right)40291-M005 (Left)

GT-40291-M003GT-40291-M005


Machine

Part Number

Description



ALL PARTS MADE FOR SANTINELLI®10 SANTINELLI®


40291-M007

GT-40291-M007

BSL-460375-1RS Rougher 60 grit (Right)

Machine

Part Number

Description


40291-M002 (Left)40291-M004 (Right)

GT-40291-M002GT-40291-M004

MD-1EE6Y LS/RSMD-1EE6Y LS 112o Straight D400

MD-1EE6Y RS 112o Straight D4000

Machine

Part Number

Description


40291-M031 (Right)40291-M032 (Left)

GT-40291-M031GT-40291-M032


Machine

Part Number

Description


40291-M003 (Right)40291-M005 (Left)

GT-40291-M003GT-40291-M005


Machine

Part Number

Description



SATISLOH® PARTS MADE FOR SATISLOH®11

92-000-929

GT-92-000-929

PCD-Insert 11mm(PCD cutter bits 11 mm)

Satisloh® V-ProMachine

Part Number

Description


Satisloh® VFT

GT-92-009-118

92-009-118

PCD-CTX 12 Tooth CutterHead (12 blade PCD disc)

Machine

Part Number

Description


Satisloh® VFT

GT-92-007-626

92-007-626

Monocrystalline Insert(Turning tip MCD R 2 mm)

Part Number

Description


MachineMachine

Part Number

Description


92-007-611

GT-92-007-611

PCD-GX(Turning tip PCD R 2 mm)

Satisloh® VFT Machine

Part Number

Description


Call Us

GT-PCD-06-3012

Monocrystalline Insert

Satisloh®

12 SATISLOH® PARTS MADE FOR SATISLOH® 13

Satisloh® ES

GT-MD-06-1017

Call Us

MD-1EE6Y(60D - 18T - 1.5X - 30H112o V - Groove D400)

Machine

Part Number

Description


Part Number

Description


Machine Satisloh® ES

GT-MD-06-1018

Call Us 92-005-736 Pin Bevel

MD-1EE6Y(60D - 18T - 1.5X - 30H

112o V - Groove D2400)

Satisloh® ES

GT-92-005-736Pin Bevel

MD-1EE6Y60D - 3.3T - 30H

30o Bevel

Machine

Part Number

Description


SATISLOH® PARTS MADE FOR SATISLOH®

13

Satisloh® ES

GT-MD-06-1017

Call Us

MD-1EE6Y(60D - 18T - 1.5X - 30H112o V - Groove D400)

Machine

Part Number

Description


Part Number

Description


Machine Satisloh® ES

GT-MD-06-1018

Call Us 92-005-736 Pin Bevel

MD-1EE6Y(60D - 18T - 1.5X - 30H

112o V - Groove D2400)

Satisloh® ES

GT-92-005-736Pin Bevel

MD-1EE6Y60D - 3.3T - 30H

30o Bevel

Machine

Part Number

Description


SATISLOH® PARTS MADE FOR SATISLOH®

SCHNEIDERPARTS MADE FOR SCHNEIDER14

120º Insert 90º Insert

Call Us Call Us

GT-DB-07-2004

90o IncludedAngle Monocrystalline

Insert

Machine

Part Number

Description


Schneider

GT-DB-07-2005Insert 16 mm Round

PCD 16 mm Insert

Machine

Part Number

Description


SchneiderSchneider

GT-DB-07-2003

Call Us


Insert

Machine

Part Number

Description



Schneider

GT-PCD-07-1001

Call Us

PCD-CTX HSC-32E 12 Tooth Roughing Cutter

Machine

Part Number

Description


Part Number

Description


Machine Schneider

GT-PCD-07-1002

Call Us

PCD-CTX HSC-32C 12 Tooth Roughing Cutter


120º Insert 90º Insert

Call Us Call Us

GT-DB-07-2004


Insert

Machine

Part Number

Description


Schneider

GT-DB-07-2005Insert 16 mm Round

PCD 16 mm Insert

Machine

Part Number

Description


SchneiderSchneider

GT-DB-07-2003

Call Us


Insert

Machine

Part Number

Description



Schneider

GT-PCD-07-1001

Call Us

PCD-CTX HSC-32E 12 Tooth Roughing Cutter

Machine

Part Number

Description


Part Number

Description


Machine Schneider

GT-PCD-07-1002

Call Us

PCD-CTX HSC-32C 12 Tooth Roughing Cutter

FAX- (949) 250 0409 PHONE- (877) 266 - 2322

EMAIL- [email protected]

CUSTOMER TOOL ORDER FORM16Contact Name

E-mail Address

Company Name

Address

City

Part Number

Special Designs Available upon Request

State, Zip

Operation

Machine Model

FinishingSurfacing

©2014 EHWA ALL RIGHTS RESERVED

DISTRIBUTED BY:

Date post:	24-May-2018
Category:	Documents
Upload:	phamliem
View:	222 times
Download:	1 times

D Surfacing Finishing Tools - ehwadiamondusa.com · Surfacing & Finishing Tools DIAMOND 2014 ......

Documents