d3technologies.com

d3 4U v2.5GETTING STARTED

GUIDE

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

Index

• INDEX

• WELCOME

• WHAT’S IN THE BOX?

• ACCESSORIES

• CABLES

• FIRST TIME SETUP

• MULTI-MACHINE SETUP

• d3 SUPPORT & TRAINING

• d3 CONSULTING

• WARRANTY

• RMA REQUEST FORM

P 02

P 03

P 04

P 05

P 06

P 07

P 08

P 09

P 10

P 11

P 13

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

3

WelcomeWelcome to d3.Thank you for your purchase!

Thisdocumentationisprovidedtoguideyouthroughyourfirstsetupandcommonsetupfeaturesofyourd34Uv2.5

Your d3 Media Server was prepared by______________________________ on ___________________________

Your Account Manager is Shannon Harvey

Your Account Manager can be reached at +44 20 7234 9840

If you have any support questions please contact support@d3technologies.comor forquestions regardingaspecificproject contact consulting@d3technologies.com

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

4

Whenyoufirstreceiveyourd3system,werecommendyouinspectit’scontentstoensureyouhaveallthebundledaccessories.

If the items listed here are not included with your system, please contact d3 support at:support@d3technologies.com

Remember, you can always contact us for spares.

What’s in the box?

Front (open)

System (Isometric)

Rear

PWR

Alarm Alarm

HDD

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

5

Accessories

Large Air Filter x1

d3 Mousemat x1

Small Air Filter x1

d3 Brochure x1

USB Keyboard x1USB Mouse x1

USB2 512Gb backup drive x 1

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

6

CablesPower Cable - 13a IEC, Schuko IEC, US IEC x1 (one Included depending on your location)

RME Analogue Breakout x1 Active DP - DVI Adaptors x4

For restocking any items above please contact:

sales@d3technologies.com

+44 (0) 20 7234 9840

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

7

First Time SetupIMPORTANTWhenyoufirstopenthed3Serverbox,werecommendyousetusethisFirstTimeSetupguideandcheckeverythingisworkingproperly. Please note the DOA clause in the attached Warranty at the back of this booklet.

1. Connect a single monitor via the supplied Active DisplayPort to DVI adapter to Video Output 1.

2. Connect a set of speakers to one of the the audio line outputs of the supplied Audio Breakout Cable.

3. Connect the Keyboard and Mouse to two open USB Ports at the rear or on the front of the unit.

4. Connect a Network cable to connect your system to the internet for updates, latest releases, d3 Support and on-line User Guide.

5. Flip the mains power button at the rear of the unit to ON, press the power on button on the front of the unit, and wait for windows operating system to boot up.

6. Double-cllick the d3 icon on your desktop to start d3.

7. Refer to the On-Line User Guide for an in-depth guide to how to use d3.

8. Refer to the enclosed Hardware Guide for further information on your Hardware.

Please contact your Account Manager immediately if there is any visible damage to the packaging, hardware or any issues with yourfirsttimesetupexperience,asthismayaffectyourwarranty.

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

8

Multi-Machine Setup

For further information on Master/Slave setups, please see the d3 User Guide online at: http://www.d3technologies.com/support/user-guide/chapters/master-slave

Therearemanywaystocanconfigureamultid3systeminstallationdepending on your requirements.

However you set things up, when setting up a multi d3 server master/slave network with auto fail-safe understudy backup, the following items are recommended:

Gigabit Network Switch - for fast media management, system control and backup networking.

KVM - for Multi-System control from a single Front of House Worksta-tion.

Video Matrix - for input and output switching of dynamic video system profilepresetsforbackupandflexibleconfiguration.

UPS Battery Backup - for system power backup and to give time for fail-over protection and system restart without loosing active processes.

Please contact d3 Support for further information and advice on Master/Slave setup and further advice on Understudy auto-fail-over setups, if youcannotfinditintheuser-guidelinkbelow.

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

9

d3 Support & TrainingTraining

We want to make sure you put your newly purchased d3 system(s) to best use. As a new customer of d3Technologies, you will receive a free 3-day training course at your premises for those in your company who will be working with the system. Your account manager will be in touch with you to discuss availability. You are also entitled to a one-day refresher course per year in the following two years of your machine’s warranty at one of our scheduled training days.

If you are not a new customer to d3 Technologies, we can schedule new or trained staff in with our structuredtrainings at no cost. Please contact your Account Manager to discuss your requirements.

If you buy multiple machines as one of our rental partners, we can host training at your facilities wherebyyou can invite both staff and third party trainees.

Support

Product support is free with d3 as long as your machine is under warranty (3 years). d3 Designer comeswith a free support package of a year, after which you can subscribe to a yearly care package.

If you need us here’s how to get in touch:

1. Website-PleaseifpossiblechecktheonlineUserGuideandknowledgebasefirstbeforeproceedingtostep two. www.d3technologies.com/support.

2. E-mail-Ifyoucantfindwhatyouneedonthewebsitepleaseemailusatanytime,ourteamofsupportengineers will usually get back to you within 24 hours. Use the online form on the URL above or mail support@d3technologies.com.

3. Phone - If it’s really urgent call us. We’re here for you! +44 20 7234 9841

Software Upgrades

As long as your machines are under warranty, you will get free software upgrades. d3 Designer comes with a year of free software upgrade, further software upgrades will be part of the care package you can subscribe to after the firstyear.Allsoftwareupgradesandadditionalnoteswillbesentviaemailasdownloadablelinks-sopleasealwaysmake sure we have your current contact information.

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

10

d3 Consultingd3Technologieshassignificantexperienceinthedevelopmentofsomeoftheworldsmostdemandingproductions.Weareheretohelpyougetthebestoutofd3,fromstarttofinish.

For standard software and project questions we offer free technical support and on-line training.

In addition d3 Consulting can provide a custom package of fee based services including:

Feasibility Studies

System Design

Project Development

Project Support

Technical Management

System Provision

Code Customisation

Interaction Development

On-Site Technical Operation and Support.

To discuss your projects requirements with the d3 Consulting team please email:

consulting@d3technologies.com

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

11

WarrantyStandard Warranty

d3Technologiesprovidesa36monthreturntobasewarrantyasstandard.ExtendedWarrantiesarealsoavailableforallprod-ucts on application.

d3 Technologies provides free helpdesk technical support to its Customers by telephone or email for the lifetime of the product. Thestandardwarrantyperiodmaybeextendedand/orenhancedtoprovideonsitesupportifrequired.Achargeableoutofwarranty repair service is also available for older products. Please contact your Account Manager for further information.

Warranty Conditions

Subjecttotheconditionssetoutbelowd3Technologieswarrantsthattheproductswillcorrespondwiththeirspecificationatthe time of delivery and will be free from defects in materials and build for the period of 36 months from delivery. Any work will be performed and completed in accordance with d3 Technologies’s quality standards which ensures good and reasonable standards of workmanship. d3 Technologies Warranties do not cover and are not issued in relation to any Third Party Software. Warrantyreplacementitemsandotherspareswillbefreefromdefectsinmaterialsormanufactureforaperiodofsix(6)monthsfrom delivery or the balance of the Product warranty whichever is longer.

The above warranty is given by d3 Technologies subject to the following conditions:

1. d3 Technologies shall be under no liability in respect of any defect in the Products or failure to undertake the Work arisingfromanydrawing,designorspecificationsuppliedbytheCustomer

2. d3 Technologies shall be under no liability in respect of any defect arising from fair wear and tear, willful damage, neg-ligence, abnormal working conditions, failure to follow the Company’s instructions (whether oral or in writing), misuse or alteration or repair of the Products or of the subject matter of the Work without the Company’s approval, or mishandling orfailuretofollowadequateESDprecautions,orwhereaspecificwarninglabelisfitted:ifProductisopenedand/orthe“warranty void if seal broken” label is broken or removed.

3. d3 Technologies shall be under no liability under the above warranty or any other warranty, condition or guarantee if the total price for the Products or the Work has not been paid by the due date for payment

Dead On Arrival (DOA)

For any product that is found to be defective under the terms of the Warranty within 14 days of delivery, d3 Technologies will treat such a product as a “dead on arrival” and at its sole discretion either:

1.Sendanewreplacementpartifthedefectistrivialandsimpletofit(e.g.hotswappowermodule,fanordisk).

2. Send an engineer to site to repair the unit.

3.Collecttheunitfromthedeliveryaddress,repairorreplaceit,andreturntheunitatd3Technologiesexpense.

RMA Procedure / Returns Policy

d3TechnologiesoperatesaproceduretoefficientlymanagethereturnandrepairoffaultypartsorproductsthroughTechnicalSupport.

Products returned to d3 Technologies will be diagnosed, and repaired or replaced under warranty, usually within a few work-ing days of receipt, assuming spare parts are in stock. In some cases It may be necessary to return faulty items to their original manufacturer for repair which can involve additional delay. Where an RMA number has been issued by our Technical Support within30daysofpurchaseandtheitemhasbeenconfirmedfaulty,areplacementmaybesuppliedatd3Technologies’sdiscre-tion.

The procedure is documented below.

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

12

Warranty Cont.RMA Warranty Repair and Support Procedures

The standard warranty is a return to factory repair or replacement service.

ForProductscoveredunderthestandardorextendedwarranty,d3Technologiesprovidestechnicalsupportfreeofchargedur-ingnormalofficehoursorasprovidedunderanextendedwarrantyservice.Technicalsupportisavailableoutsideofwarrantyonanhourlybasis.TheproceduretofollowifaProductexhibitsaproblemisasdetailedbelow:

1. Call d3 Technologies’s Technical Support during normal working hours, raise a support ticket through our online ticket support system or send an email. Contact details are available at www.d3technologies.com/support

2. d3 Technologies will provide a unique Ticket reference number for progress tracking purposes that can be tracked through the d3 Technologies website.

3.d3Technologies’sTechnicalSupportwillworkwiththeCustomertoidentifyandconfirmthatthereportedproblemisaresult of a failure in the Product with diagnosis of cause if possible. If it is determined that the Product is not at fault then the call/Support Ticket will be closed.

4. If the problem is diagnosed as a hardware fault with the Product, d3 Technologies will issue a Returns Material Au-thorisation number (RMA) which will be emailed to the Customer, authorising the return of the Product under warranty for repair.

5. d3 Technologies may agree to supply an advance replacement component to the Customer or its nominated main-tainer.Thenormalhardwarewarrantyis36(ThirtySix)monthsreturntofactory.Ifanadvancereplacementcomponentissupplied an invoice will be raised for the replacement part. Provided that the faulty item in then returned to d3 Technolo-gies within 14 days of the replacement item being despatched, a credit will be applied against that invoice.

6. If a fault report is required, notice should be given at the time of the RMA.

7.TheRMAnumbermustbeincludedinthereturnpaperworkandmustbeclearlymarkedontheoutsideoftheboxcontaining the faulty item and returned to d3 Technologies.

8. Items to be returned to d3 Technologies Limited must be in the original packaging or in alternative suitable protective packaging. d3 Technologies accepts no liability for any damage incurred by inadequate packaging or poor handling. For Data Storage Systems with removable hard disk drives the hard drives in their carriers MUST be removed from the server and shipped SEPARATELY in the original specially designed disk packaging. d3 Technologies will not be held responsible for the loss of any data. Customer must ensure that all data is backed up before returning a unit. Appropriate manuals, cables etc must accompany returned items. Shipment and insurance back to d3 Technologies is the responsibility of the Customer and any damage to the unit caused by return shipping or mishandling is not covered by warranty and will be a chargeable repair.

9. The Products should be shipped to d3 Technologies’s repair facility at its main manufacturing location as detailed on the RMA form. d3 Technologies is not liable for any items not supplied by d3 Technologies and returned as part of an RMA.

10. d3 Technologies will repair or replace the unit under warranty and ship it back to the Customer at d3 Technologies expense.

d3technologies.com Unit D, 127-129 Great Suffolk Street, London SE1 1PP, UK. +44 (0)20 7234 9840

13

RMA Request FormPlease fill out this form as complete and as clearly as possible:

Item Description

Customer signature

Once you have fully read, understood and agree with the rules above please sign below:

Please read carefully, complete fully, print then sign and email scanned copy to support@d3technologies.com

Date

FOR d3 USE ONLY

RMA Number

Authorized by

Customer Name/code:

Customer Address:

Phone Number:

Email address:

FaxNumber:

Repair/Replacement(Please tick where appropriate)

All returns are subject to d3 Technologies terms and conditions, available on demand from support@d3technologies.com. Productsreturnedwithexpiredwarrantiesaresubjecttostandardrepair/replacementpricessetforthbyd3Technologies.TheRMAnumberisvalidforonly30daysfromthedateissued.AnewRMAnumberisrequiredifperiodexceeds30days.The RMA number is valid only for items originally listed in the request forms. The items are tested only for the problems listed in the RMA form, so please describe the problem clearly. “Dead on Arrival” must be reported within 14 days of receipt of product. Any physical damage or re-work done to the product or defacing labels on parts & components voids warranty. Please be sure to include all accessories including software and hardware in its original condition/packing where appropriate. Please print RMA number legibly on top of the package. Packages w/o RMA number will not be accepted. All shortcomings, discrepancies, short-shipment etc. should be brought to the notice of d3 within a period of 2 days from the date of the receipt; d3 will not be responsible, or liable thereafter in respect of this RMA.

Missing Parts Upgrade

Detailed Problem Description:

Serial InvoiceQty