DAEN LITEPoint Machine Monitoring
Smartmotors.org
Streamline maintenance
Improve availability
Predict breakdowns
smartmotors.org
Modern monitoring must include notonly the capacity to receive data oncritical points of the process orservice chain, but also the possibilityto predict potential problems.
It is within this context that the PointMachine Monitoring solution hasbeen designed, offering an scalablesolution. Installed in the interlocking,DAEN LITE is the Lite version of thePoint Machine Monitoring Solution.
It is indicated for point machines withless sensitivity to availability, such aswarehouses or garages, or for pointmachines with low criticality in thenetwork.
It also represents an option if DAENcannot be installed inside the PointMachine due to a lack of space.
Point Machine Monitoring System
Web based access for real time 24/7 monitoring condition based
maintenance.
Instant alarm reporting with artificial intelligence breakdown
diagnosis.
Mission
From the electrical side, Lite version offers the same features as the Full version
DAEN Lite monitors allrequired electricalparameters to effectivelyevaluate the performanceof the Point Machine.
smartmotors.org
Benefits
Monitored parameters
Highest sample frequency (up to 20KHz) allows calculating MCSA and
spectral analysis, used to detect a wide variety of
internal breakdowns
Thanks to the high sample frequency (up to 20KHz) it evaluate the trueRMS current signal, and the full operation current and voltage signals.
MCSA and spectral analysis
RMS current
Dataregistering
• Current• Voltage• Control voltage• Wave form• Power• Reactive power
RMS Current
RMS C 1 N RMS C 1 D
smartmotors.org
Capabilities
Access to all the data collected andgeneration of useful and intuitivecharts.
• You can generate comparisoncharts in order to detect andanalyze important correlations.
• You can superimpose alarmlimits to visualize data in acontext of good performance.
• The system calculates dailyaverage data, useful fordetecting slow trend typefailures.
• The system performs chartingstatistical data related to thewhole system. Some examples:alarms per line, alarms by PMtype, efficiency, etc.
“It’s a very interesting, useful and intuitive application, which has helped us to
avoid breakdowns with important impact to passengers, as well to reduce
significantly the maintenance costs” Superstructure Maintenace Service.
Barcelona Metro
Data proccessing and representation
Data access and analytic tool Loss of isolation
Average Current Reverse Normal
Physical obstruction
RMS Current Current maneuver Period average
Data is evaluated in order to generatereports through threshold alarms, trendsand failure patterns.
TFclient is a WEB based interface accessiblethrough any web browser with networkconnection to the TFsim server.
Designed under “dashboard” concept allowsuser customization of the informationdisplayed from a large variety offunctionalities.
Report example
Real time information
Last movement information
Alarms
Internal messages
Artificial intelligence for failure prediction and identification
Control blade gap monitoring
Data charts tools
smartmotors.org
TFclient visualization interface
TFclient
smartmotors.org
TFclient
24/7 web based multi platformFront-end.
ECON communications transceiver
Link between the server andmonitoring devices on the CANnet, gathers, process andtransmit information throughEthernet, 3G, 4G or wifinetwork.
DAEN
Point machine monitoringdevice FULL VERSION
CDX
Artificial vision device forcontrol gap inspection andfailure prediction.
TFsim is upgradable for other monitoring products such as track circuit monitoring, track widthand displacement, depot point machines, derailers, etc.
System architecture
Upgradable system
TFrep
CAN enhanced protocol HUBand repeater able to send andrepeat data up to 600 metersdistance.
DAEN Lite
Point machine monitoringdevice – Lite version
smartmotors.org
● Breakdown diagnosis through AI
The system is equipped with an artificialintelligence system able to categorize alist of alerts and assign to them a specificpathology.
Not only generates alerts, but it alsopredicts the cause and, when possible,suggests how to correct the source of theproblem that is generating the alerts.
In addition, the data acquisitionhardware itself is endowed withintelligence capable of detecting a faultand generates extensive data of theproblem. This data is sent to the serverfor further analysis.
● Hot swappable, compact and modular
Is scalable to any infrastructure size.
It incorporates on-board data storage somonitored information is not lost in thecase of unavailability of the Server.
It can be remotely configured andprogrammed.
● Customizable and user friendly
TFsim system is multi-user. Each usercustomize the screens as they own needs.
The application is organized in widgetsthat contain information. Each user,depending on their profile, can configurethe widgets they need to better handlesuch a volume of information. Is user-friendly because allows each user toconfigure the application exactly the waythey want it.
● Applicable to a wide range of motors
Same data logger can monitor a widerange of point machine types, including:one or three phase AC and DC engineswithout distinction of electro-mechanic orelectro-hydraulic Point Machines.
Automatically monitors requiredparameters for each type of PMdepending on the configuration.
● Non intrusive and easy to install
Electrical parameters are monitored withan isolated and high impedance circuit toguarantee no interference with thesystem’s operation.
● Compliance
• EN 61373, RoHS 2002/95/C
• ERAEE 2002/96/CE, EN 9100
• EN 45545-5:2013
• EN50121-4, EN61010-1
Advanced features
smartmotors.org
PowerOperation voltage 8 – 40 Vdc
Power Consumption 100mA@12Vdc
Communication
Protocol Fault Tolerance CAN Bus (ISO 11898-3)
Number of wires needed 2
Baudrate 50-125 kbps
Electrical Char.
Isolation Voltage 1400 Vpeak
Input Impedance (Voltage measurement)
>1.5MOhms
Precision 1%
Physical Char.
Operating Temperature Industrial Range(-40ºC to +85ºC)
Mounting 35mm DIN rail
MTBF 105 hours
Enclosure IP 20
Width 22.5 mm
Height 113.6 mm
Depth 105.7 mm
Weight 300 g
Features
Sampling Frequency 2 KHz to 20KHz
Operation Data logging time 10s (MAX)
Minimum Time between operation detection
0.01s
Memory Up to 4 Movements Stored
Visual Indicators Actual position and Operation Leds.
Complementary information
DAEN LITEPoint Machine Monitoring
smartmotors.org
Thinking Forward XXI SLDegà Bahí 62, 08026 BarcelonaSpain
The information in this document containsgeneral descriptions of the technical optionsavailable, which do not always have to bepresent in individual cases. The requiredfeatures should therefore be specified in eachindividual case at the time of closing thecontract.