Date post: | 15-Mar-2016 |
Category: |
Documents |
Upload: | bhavin-vora |
View: | 223 times |
Download: | 0 times |
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
POLYMERBAZAR: Daily Mail Alert (20/7/2010, Tuesday)
Sr.No. Last Domestic Price Revision W.E.F. 15/7/2010
Polymers Up /Down Revision (RS/.KG)
1 Poly Propylene No Change
TQ No Change
MA/RAFFIA No Change
2 Poly Ethylene
All other H.D.P.E DOWN Rs.1/kG
H.D.P.E injection DOWN Rs.2/kG
H.D.P.E. film DOWN Rs.1/kG
L.L.D.P.E. DOWN Rs.2.5/kG
L.D.P.E DOWN Re.1/kG
H.M. Film DOWN Rs.1/kG
3 Poly Vinyl Chloride NO Change
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
Today's (20/7/2010, Tuesday) International Polymer - Price (USD/MT.)
Grade (Application) Spot Rate(USD/M.T.) Trend Applicable Amt.In Rs./Kg , After calculating Last
week
Poly Propylene:P.P $ From $ To Port Import Duty,(1 $=Rs.47)* Report $
Raffia (Homo Polymer) $ 1200 To $ 1210 Down CFR,China Rs. 72372 To 72950 -15
Injection moulding , (Homo
polymer,11 M.F.I.) $ 1165 To $ 1175 Down CFR,China Rs. 70349 To 70927 -20
Film (Tubular quench-T.Q.) ,
(Homo polymer) $ 1190 To $ 1200 Down CFR,China Rs. 71794 To 72372 -20
B.O.P.P. $ 1270 To $ 1280 Down CFR,China Rs. 76419 To 76997 -15
Impact Co-Polymer (I.C.P or P.P.C.P.)
$ 1260 To $ 1270 Down CFR,China Rs. 75841 To 76419 -15
Random Co-Polymer ,(R.C.P.)
$ 1290 To $ 1300 Down CFR,China Rs. 77575 To 78153 -25
Grade (Application) Spot Rate(USD/M.T.) Trend Applicable Amt.In Rs./Kg , After calculating Last
week
High Density Poly Ethylene: H.D.P.E.
$ From $ To Port Import Duty,(1 $=Rs.47)* Report $
Raffia $ 1090 To $ 1100 Down CFR,Shanghai Rs. 66013 To 66591 -10
Film $ 1090 To $ 1100 Down CIF,Singapore Rs. 66013 To 66591 -20
Injection moulding ( 18 M.F.I.)
$ 1050 To $ 1060 Down CIF,Malaysia Rs. 63701 To 64279 -20
Blow moulding $ 1130 To $ 1140 Down CIF,Vietnam Rs. 68325 To 68903 -20
HM Pipe (P.E.-80 ) $ 1110 To $ 1120 Down CFR,Shanghai Rs. 67169 To 67747 -20
HM Film $ 1100 To $ 1110 Down CFR,Shanghai Rs. 66591 To 67169 -25
HM Blow $ 1090 To $ 1100 Down CFR,Shanghai Rs. 66013 To 66591 -25
Grade (Application) Spot Rate(USD/M.T.) Trend Applicable Amt.In Rs./Kg , After calculating Last
week
Linear Low Density Poly Ethylene:L.L.D.P.E.
$ From $ To Port Import Duty,(1 $=Rs.47)* Report $
Film (1 , M.F.I.) $ 1150 To $ 1160 Down CFR,Sanghai Rs. 69482 To 70060 -40
Roto moulding $ 1140 To $ 1150 Down CFR,Sanghai Rs. 68903 To 69482 -40
Injection moulding (High M.F.I.)
$ 1160 To $ 1170 Down CFR,Sanghai Rs. 70060 To 70638 -40
Lamination $ 1165 To $ 1175 Down CFR,Sanghai Rs. 70349 To 70927 -40
Grade (Application) Spot Rate(USD/M.T.) Trend Applicable Amt.In Rs./Kg , After calculating Last
week
Low Density Poly Ethylene:L.D.P.E.
$ From $ To Port Import Duty,(1 $=Rs.47)* Report $
General Purpose / Film grade $ 1345 to $ 1355 Down FCA,Sanghai Rs. 80754 To 81333 -15
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
Heavy Duty $ 1365 to $ 1375 Down FCA,Sanghai Rs. 81911 To 82489 -15
Lamination / Extrusion $ 1345 to $ 1355 Down FCA,Sanghai Rs. 80754 To 81333 -15
Injection Moulding $ 1325 to $ 1335 Down FCA,Sanghai Rs. 79598 To 80176 -15
Milk Pouch $ 1315 to $ 1325 Down FCA,Sanghai Rs. 79020 To 79598 -15
Grade (Application) Spot Rate(USD/M.T.) Trend Applicable Amt.In Rs./Kg , After calculating Last
week
Poly Vinyl Chloride :P.V.C. $ From $ To Port Import Duty,(1 $=Rs.47)* Report $
Suspension (Pipe / Extrusion) ,"
K' Value 67 $ 910 to $ 920 Down CFR China Rs. 55607 To 56185 -10
Injection Moulding,"K" Value 57
$ 900 to $ 910 Down CFR China Rs. 55029 To 55607 -10
Carbide based P.V.C.(Make chinese)
$ 905 to $ 915 Down CFR China Rs. 55318 To 55896 -10
Grade (Application) Spot Rate(USD/M.T.) Trend Applicable Amt.In Rs./Kg , After calculating Last
week
Poly Styrene:P.S. $ From $ To Port Import Duty,(1 $=Rs.47)* Report $
GPPS $ 1210 to $ 1220 Down CFR China Rs. 72950 To 73528 -20
HIPS $ 1280 to $ 1290 Down CFR China Rs. 76997 To 77575 -20
Grade (Application) Spot Rate(USD/M.T.) Trend Applicable Amt.In Rs./Kg , After calculating Last
week
A.B.S (Acrilonitrile Butadiene Styrene)
$ From $ To Port Import Duty,(1 $=Rs.47)* Report $
ABS $ 1810 to $ 1820 Down CFR China Rs. 107636 To 108214 -20
Grade (Application) Spot Rate(USD/M.T.) Trend Applicable Amt.In Rs./Kg , After calculating Last
week
P.E.T (Polyethylene terephthalate) $ From $ To Port Import Duty,(1 $=Rs.47)* Report $
P.E.T $ 1250 to $ 1260 Down CFR China Rs. 75263 To 75841 -25
Note:
1.) Care has been taken for Polymer rate & accuracy part is concerned. This rate gives a general idea & over View of International Rate of diff.polymers.There are chances of having rate difference depending upon qty.,port,origin & payment terms.
2.) Data given here above has been collected from reliable sources & published in good faith only.We don’t take any responsibility for the decision taken basis on any part of this report.
3.) Calculation of imposed duty in respective polymer has been taken in general, pl. consider Anti-dumping duty to any sp. polymer, port or make if it is applicable.
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
Today’s (20/7/2010, Tuesday) Domestic Polymer – Price (Rs/Kg)
P.P. Availability Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
Raffia Normal 74.75 73.75 76.3 75.75 75 75.25 77.25
H100EY* Little Tight 75 74 76.5 76 75.25 75.5 77.5
H110MA Normal 74 73 75.5 75 74.25 74.5 76.5
AM120N Normal 73.5 72.5 75 74.5 73.75 74 76
110MG Normal 73.5 72.5 75 74.5 73.75 74 76
MI3530 Tight 90 89 91.5 91 90.25 90.5 92.5
RCP SRN 100 NC Tight 97 96 98.5 98 97.25 97.5 99.5
RCP SRN 20 NC Tight 100 99 102 101 100.3 100.5 102.5
IOCL-PP Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
1110 Normal 73.5 72.5 73.3 74.5 73.75 74 72.5
H.D.P.E. Raffia Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
E 52 Tight 77 76 78.5 78 77.25 77.5 79.5
W 50 / W 52 Tight 77.5 76.5 79 78.5 77.75 78 80
T 9 Tight 74.5 73.5 76 75.5 74.75 75 77
H.D.P.E. Inj. Mldg Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
50 MA 180 Tight to normal 73 72 74.5 74 73.25 73.5 75.5
M 60200 Tight to normal 72.5 71.5 74 73.5 72.75 73 75
M 5018L Tight to normal 73 72 74.5 74 73.25 73.5 75.5
I 50 A 180 Tight to normal 72 71 73.5 73 72.25 72.5 74.5
H.D.P.E. H.M. Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
5400 Very Tight 68.5 67.5 70 69.5 68.75 69 71
GAIL 55 Tight 68 67 69.5 69 68.25 68.5 70.5
52 GF Tight 67.5 66.5 69 68.5 67.75 68 70
F46/T9 Tight 66 65 67.5 67 66.25 66.5 68.5
H.D.P.E. BLOW Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
B52 Normal 68.5 67.5 70 69.5 68.75 69 71
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
B 6401 Normal 68.75 67.75 70.3 69.75 69 69.25 71.25
B56/54GB Little tight 68.5 67.5 70 69.5 68.75 69 71
LLDPE FILM Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
LL F19 Tight 77 76 78.5 78 77.25 77.5 79.5
71601 Tight 76.75 75.75 78.3 77.75 77 77.25 79.25
E 19010 Tight 76 75 77.5 77 76.25 76.5 78.5
LLDPE ROTO Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
73204 Tight 78.75 77.75 80.3 79.75 79 79.25 81.25
36RA Very Tight 78.5 77.5 80 79.5 78.75 79 81
L.L.D.P.E lamination Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
E24065 Very Tight 77 76 78.5 78 77.25 77.5 79.5
L.D.P.E. Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
24FS040 Very Tight 95 94 96.5 96 95.25 95.5 97.5
16MA400 Very Tight 97 96 98.5 98 97.25 97.5 99.5
1070/1035 Very Tight 103 102 105 104 103.3 103.5 105.5
LLDPE INJ.MLDG Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
M26500 Tight 86 85 87.5 87 86.25 86.5 88.5
PVC Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
6701 Normal 57 56 58.5 58 57.25 57.5 59.5
5701 Normal 59 58 60.5 60 59.25 59.5 61.5
Imported mat. LL Film (1 M.F.I) Ahmedabad Bombay Delhi Banglore Pune Indore Kolkata
118 W 75 74 76.5 76 75.25 75.5 77
1001 Normal 75.5 74.5 77 76.5 75.75 76 77.5
HM film
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
Titan Normal 67 66 68.5 68 67.25 67.5 69
SABIC Normal 67.5 66.5 69 68.5 67.75 68 69.5
MOBIL Normal 66.5 65.5 68 67.5 66.75 67 68.5
MHPC Normal 67.25 66.25 68.8 68.25 67.5 67.75 69.25
LDPE –lamination
HANWAH Normal 100 99 102 101 100.3 100.5 102
TITAN Normal 101.5 100.5 103 102.5 101.8 102 103.5
Market News (World wide): BPF‟s Business Conditions Survey signals industry confidence in recession recovery
Tue, 20 July 2010
The results of the British Plastics Federation‟s (BPF) Business Conditions Survey 2010 have signalled industry
confidence in post recession recovery with 73% of all respondents forecasting an increase in UK Sales Turnover in the
next twelve months.
Conducted by the BPF annually, the Business Conditions Survey is completed by the BPF‟s company members who
represent various sectors in the plastic industry and aims to capture key information around industry trends and issues.
The survey looks at areas such as turnover, staffing, finance, capital investment and industry regulation issues. The UK
plastics industry supplies into all strategic sectors of the economy and is a barometer for the state of industry.
This year‟s findings have shown a positive outlook for the UK plastics industry with many companies expecting
business profits to rise considerably in the next few months. Of the 73% of businesses expecting an increase in UK
sales turnover, 24% are expecting a 2-5% increase, 29% a 6-10% increase and 20% an 11% and over.
The move towards workforce expansion is further evidence of recession recovery, with a staggering 46% of companies
expecting to increase staff and only 5% stating that they would reduce staff in the next twelve months. This is a
substantial change from the Business Conditions Survey June 2009 in which 59% of respondents planned to reduce
staff.
Despite the positive outlook for most sectors, the Construction and Building products sector appears to have been
badly hit by the effects of the recession with most predicting no increase in UK sales turnover. 5% of respondents cited
Raw material price increases as a factor and also public spending cutbacks.
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
“The survey clearly shows increasing confidence in the plastics industry that a recovery is taking place. But
construction products are still rather depressed and there are concerns over raw material price increases and the effect
of Government cut backs on private sector customers”, said Peter Davis, Director General of the BPF.
The survey results show a healthy level of planned Capital Investment with 61% of respondents planning Capital
Investments over the next twelve months. There is a particularly strong emphasis on this from Moulders, Recyclers,
Additives and Masterbatch. While 34% of respondents have stated that an „upgrade‟ and „expansion‟ are the reasons
for capital investment, 22% of respondents highlighted Energy Efficiency as a key driver.
“It‟s particularly encouraging that over 60% of companies are planning Capital Investments over the next twelve
months. This is essential to remain competitive and efficient. It‟s good to see that many of the investments are to
secure greater energy efficiency. This is important in meeting the energy reduction targets in the BPF Climate Change
Agreement, “said Davis.
According to respondents, a growing area of concern is the number of costly, burdensome and unnecessary regulations.
At the top of the list 57% of respondents cited Health and Safety regulations as „time wasting‟ and „senseless set of
rules and policies‟.
“Our companies have listed a litany of time wasting regulations. We shall forward this to the De – Regulation Minister
Mark Prisk MP. The new Government is keen to hear suggestions from business on what regulations to dump or
simplify,” said Davis.
Source: Plastinfo
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
Last week’s Global Polymer Report
Sr.No. Week 2nd,July 2010 (14/7/2010)
Polymers Up /Down Revision (USD /MT) 1 Poly Propylene Down 15
TQ Down 20
MA/RAFFIA Down 15
2 Poly Ethylene
H.D.P.E Raffia Down 20
H.D.P.E injection & blow Down 20
H.D.P.E. film Down 20
L.L.D.P.E. Down 40
L.D.P.E Down 10
H.M. Film Down 20
3 Poly Vinyl Chloride Down 10
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
Purchase opinion:
Domestic company has revised price down ward again WEF 15/7/2010, which has demoralise the market.
As of now HDPE & HM-HDPE to the lowest bottom ,or at lowest range ,we are of the opinion that traders &
manufacturer can start purchasing same either for immediate sale or for the purpose of inventory.
LDPE is also under short supply since long. In these grades, purchaser need not require to wait to avail
material at company price list rate. Details of last rate revision are available on very 1st page of this sheet.
Over all Purchase is advisable in PP/HDPE/HM-HDPE.
As for casted on last Monday, Last Global Polymer Report was also down by $ 20 -$ 30 in all polymers. As per
our study ethylene monomer at international level is being offered @$ 800-$ 825.There are chances that
ethylene monomer may touch $ 750-780 looking to continuous down fall in ethylene prices & recent Control of
US sanctions on Iranian Petrochemicals companies. This may lead all major global Poly ethelene mfgrs to
decrease their offer rate to match market competition.
"Iranian origin polymers facing difficulties after sanctions Iranian origin polymers are currently facing
difficulties in global markets stemming from tighter US sanctions."
As per us, still it’s a time to wait & watch before starting purchase of PE. At any moment of time trend may
take "U" turn towards stability or Increment. It all depends upon nos. of Diff. factors like exchange rate, Mat.
Availability, Monomer's rate, demand in finish goods etc. Procurement of material should be in accordance
with mfgrs monthly production capability, it should not increase 50% of total capacity.
Our services:
(1.) Daily Polymer Price E-mail (in RS./KG & in USD/MT)
(2.) Daily data sharing of New Joined Members with full details
(3.) Specific sale & purchase offer by Free & Paid Members
(Includes Virgin Raw mat.,2nd hand & fresh M/c,Project ,Plant & much more...)
(4.) Advt. of (Masterbatch, Pigment,M/c mfgr,Re-processed,Printing Ink ,etc)
We have uploaded polymer Purchse Opinion (this week)
Site has been uploaded with latest company Price list,Latest International & Domestic Polymer Prices.
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
Today's Available Material:
PP: Raffia, H 100 EY,H 110 MA: Ready SRM 100 NC,MI 3530: Stock nil, next lot is expected soon SRN 20 NC: Stock nil ,next lot is expected in short time. HPL PP=1110 Inj. moulding : Ready HDPE: --------- Inj. mldg :Gail I50A180,HPL 5818,M60200 :Ready Blow mldg.: Gail B 52: Ready HM-HDPE: Imported MHPC, Gail F 55, HM 5400, Libya(Imported):Ready LLDPE: ----- Film:F19010 :Ready Roto: Material is Ready. inj.mldg; M26500: Ready Imported LL: Ready LDPE: ---- General Purpose: 24 FS 040: Ready. Inj.mldg:16 MA 400: Ready Lamination: LA 1070, Titan 801YY, Hanwah : 955: Ready (We offer material available with us at the time of mailing this list, grade availability & qty. may vary depending upon time to time. Pl. confirms your requirement at the earliest, as We will serve till mat. is available with us)
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
TODAY'S NEW JOINED MEMBER DETAILS:
About Me
Importer of Bopp Film
Company name:
Abhishek Mukim
Office / Factory Address;
Mumbai
Contact person name
Abhishek
Contact nos.(Mobile)
9820260024
Email address:
If You are D.C.A. or Dealer of any Principle Company, We have a Special Page Alloted to Company Source,Pl.get
register there:
n/a
Details of Company Source in Your Area: (Dealer or Consignment Stockiest or DCA of Principle Company)
n/a
Activity in details (Manufacturers / Trader of ) :
Importer of BOPP Film
Each Polymer Material Consumption/Month :
Importer of BOPP Film
Material Purchase (Market will Approach in accordance this data) :
Importer of BOPP Film
Material Sale (Market will Approach in accordance this data):
Importer of BOPP Film
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
How did you come to know :
website
Your other refrences in Plastics & Polymers:(On behalf of you we will approach them)
n/a
How do you rate this Website as an effort to serve General Plastics Industries:
Good
What else as an information do you expect from us:
n/a
Do you get our (POLYMERBAZAR) Polymer's S.M.S. on your mobile?If not.you can send single S.M.S. JOIN
SAMYAK from ur cell to 9219592195
ok
To Get Daily Polymer SMS (INR/KG) Pl.SMS JOIN POLYMERDAILY to 9219592195
i want to subscribe to daily sms
To Get Weekly Polymer SMS(INR/KG) Pl. SMS JOIN POLYMERWEEKLY to 9219592195
ok
If you are a Trader / Plastics mfgr.,we can put Polymer price data(Open market) provided by you of your area:
Importer of BOPP Film , supplying to in and around mumbai
We Intend to make Plastics & Polymers Group,(Association )at INDIA level.To fight against Anti-Polymers activities
& make Genuine demand.Can we have your support?;
yes
Any specific remarks:
Anyone requiring BOPP film container, contact me on 9820260024
Can We forward Your mentioned data in Our "POLYMERBAZAR" Group?
yes
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
Organised By: BHAVIN VORA
SAMYAK ENTERPRISE,
AHMEDABAD.
+91 94260 14056
+91 93745 24365
+91 99253 96965
+91 079 266 44 357 / 266 01 603
http://polymerbazar.webs.com/
Email:[email protected]
WE RECOMMAND (ADVERTISEMENT AREA):
.-------------------------------------------------------------
MOULD MANUFACTURERE:
M/S NIDHI MOULD
61,Shri Ram industrial estate,
Nr. Soni ni chawl Odhav,Ahmedabad.
(Mfgrs & Exporters of Injection moulds & dies)
Mr.Praful k. Patel
+91 079 2563 0319
+91 98250 60914
E-mail : [email protected]
--------------------------------------------
Website : www.nidhiplastindia.com
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
ROTATIONAL MOULDING M/C MFGR:
SHREE MOMAI ROTOCAST CONTAINERS (P) LTD
PARTICIPANT OF PLEXPO-10 (JAN 9 th to12 th,2010 ),
(A grand event in Plastics Industries, Organised by G.S.P.M.A.,, 39 th Annual Seminar.Ahmedabad. )
We are thankful to all,who visited us in PLEXPO-10.
Contact Person: Mr.Ramchandran Iyer (Director)
Contact no: +91 9825310071
+91 9426005742
: +91 9825310071
+91 2668263440
: +91 2668263358
(ISO 9001:2000 COMPANY)
Address: SHREEMOMAI ROTO CAST CONTAINERS PVT LTD
C-1 /821 -GIDC WAGHODIA, VADODARA
GUJARAT - INDIA -391760
EMAIL : [email protected]
URL : http://www.shreemomai.com
MFG.:
(1) MANUFACTURER & EXPORTERS OF ALL TYPE ROTATIONAL MOULDING MACHINERY
(2) THREE ARM , FOUR ARM , TWO ARM BIAXIAL MACHINE WITH PLC CONTROL OR WITHOUT
(3) SHUTTEL MACHINE WITH MULTY ARM TWO / FOUR , ROCK N ROLL
MACHINE PULVERIZER 100 KG/HR, 200 KG/HR , 300 KG/HR , ALL TYPE MOLDS IN M.S. & S.S.
**************************************************************************************************************************
The Single Platform For Indian Plastics News & Business
(M)+91 93745 24365,+91 94260 14056**E-mail:[email protected]
http://www.polymerbazar.webs.com
To Avail Free S.M.S of International Polymer Price Movement & Domestic Polymer Price
Revision, Send JOIN SAMYAK to 9219592195
Web site:www.polymerbazar.webs.com
We are also available on twitter:www.twitter.com/polymerbazar
REPROCESS RAW MATERIAL FROM:
(Here we can put ur business card & contact nos.)
RECYCLED & SEMI VIRGINE PLASTICS MAT.FROM:
(Here we can put ur business card & contact nos.)
MASTER-BATCH OF:
(Here we can put ur business card & contact nos.)
FILLER FROM:
(Here we can put ur business card & contact nos.)
PIGMENTS OF : (Here we can put ur business card & contact nos.)
PLASTICS PROCESSING MACHINE OF: (Here we can put ur business card & contact nos.)
PRINTING INK OF: (Here we can put ur business card & contact nos.)