EN

1

1. Control panelRefrigerator compartment2. LED lighting3. Fan 4. Fan cover and antibacterial filter area5. Shelves6. Bottle rack7. Cheese box + Lid8. Multi-flow cold air area9. Sensor cover10. Active 0° compartment (to keep foods

fresher for longer)11. Rating plate with commercial name12. Fruits and vegetables crisper13. Fridge drawer divider14. Door reversibility kit15. Door trays16. Egg tray17. Small items half balcony18. Bottle separator19. Bottle balcony20. Door sealFreezer compartment20. Door seals21. Freezer drawers22. Quick Ice23. Middle drawer: coolest zone best for

freezing fresh food24. Freezer drawer divider25. Shelves

PRODUCT DESCRIPTIONAPPLIANCE

1

3

5 6

9

1112

14

2

21

8

22

10

25

13

7

4

20

17

1516

1819

23

24

DAILY REFERENCE GUIDE

Before using the appliance carefully read the Health and Safety guide.

THANK YOU FOR PURCHASING A WHIRLPOOL PRODUCTTo receive more comprehensive help and support, please register your product at www . whirlpool . eu/ register

WWW

You can download the Safety Instructions and the Use and Care Guide by visiting our website http://docs.whirlpool.eu and following the instructions on the back of this booklet.

2

CONTROL PANEL

2 3

4

5 6 7 8 9

19

1

10 11 12 16 1314-15 17 18

1. FRIDGE TEMPERATURE button/indicator2. FRIDGE TEMPERATURE DISPLAY (°C)3. VACATION MODE BUTTON4. FREEZE CONTROL BUTTON 5. FREEZER TEMPERATURE DISPLAY (°C)6. FREEZER TEMPERATURE button7. ANTIBACTERIAL AIR FILTER alarm indicator8. BLACK-OUT ALARM indicator9. MALFUNCTION ALARM indicator10. ON/STAND-BY button/indicator11. FAST COOL button/indicator12. ACTIVE 0 button/indicator13. 6TH SENSE FRESH CONTROL indicator14. CONNECTION STATE indicator 15. CONNECTIVITY button16. KEY LOCK button/indicator17. FAST FREEZE button/indicator18. STOP ALARM button/indicator19. DOOR OPEN ALARM indicator

This control panel has an innovative technology that will drive you are setting your fridge. When un option or a function is activated the indicator is fully lit on; when a option is available but not selected is partially lit on.

NOTE: when you are setting temperature or interacting with the control panel, all the buttons are switched on. when you are not using the control panel, in order to save energy it will show you only the relevant information (the temperature set, the activated options).

Every time you want to use the control panel and see all the functions, you just need to touch any button to wake up the panel.

EN

3

FIRST TIME USE

HOW TO START THE APPLIANCE

After plugging in the appliance to the mains, press the On/Standby button to switch on. The default value settings are displayed for refrigerator (5 °C) and for Freezer compartment (-18°C).

After starting the appliance, wait at least 4-6 hours before placing food into the fridge and into the freezer compartment.The default (factory) values of the fridge compartment settings light-up.

ACCESSORIES

CONNECTIVITY PRE-REQUISITEWhen the refrigerator is connected to Internet,You can always monitor and operate remotely the appliance. To use this feature You need to own:

– a smart phone running Android 4.3 (or higher) with a 1280x720 (or higher) screen or a tablet or a smart phone running iOS 8 (or higher);

– a wireless router 2.4Ghz WiFi b/g/n connected to internet (verify with your smart device that the signal strength of your home wireless network close to the appliance is good).

– Important in order to use App, You have to : – Check if the room in which your smart appliance is

installed is covered by the signal of your home wireless

network. – Own a IOS device (Ipad/Iphone) or Android

(Smartphone) – Download the free “Live” app from the reference App

store or Google play of your smart device and install it on your device.

– Subscribe (legal terms) to the service to be able to benefit of the features provided through the app.

– Register your refrigerator and connect it to your home wireless network.

Find detailed information on connectivity setup in the App or in the Use & Care guide.

EGG TRAY CHEESE BOX BOTTLE RACK

BOTTLE SEPARATOR FREEZER DRAWER DIVIDER FRIDGE DRAWER DIVIDER

QUICK ICE COMPARTMENT EUTETICS/QUICK ICE TRAYS

4

DAILY USE FUNCTIONS

See Use and Care Guide for more details on functions / see last page for information on how to obtain the Use and Care Guide

ON/STANDBY To put the product in Stand-by, press and hold the On/Stand By button for 3 seconds. All the indicators turn off except On/Standby button.

Press again to reactivate the appliance.

TEMPERATURE SETTING FRIDGE TEMPERATURETo adjust the Fridge Temperature, press the Fridge °C button

. The Fridge Temperature can be adjusted between +2°C and + 8°C, as shown by the Fridge Temperature Display (°C).

FREEZER TEMPERATURETo adjust the Freezer Temperature, press the Freezer °C button

. The Freezer Temperature can be adjusted between -16°C and -24°C, as shown by the Freezer Temperature Display (°C).

VACATION MODE This function can be activated to reduce the energy consumption of the appliance during a prolonged period of time. To activate/deactivate press and hold for 3 seconds the Vacation mode button. When the function is enabled, the related symbol will light up.Changing the temperature setpoint will automatically deactivate the function.The freezer compartment works properly.

KEY LOCK To lock/unlock the keys of the Control Panel, press the Key Lock button for 3 seconds: the Key Lock indicator will be displayed for a short time and an acoustical signal will be played.

SMART DISPLAYThis optional function can be used to save energy. When activated, only 6th sense fresh control logo is lit on, other buttons and the displays are switched off to minimize the consumption. To activate/deactivate smart display press together temperature buttons of fridge and freezer by 3 seconds. Remember that this function does not disconnect the appliance from the power supply, but only reduce the power consumed by external displayEvery time you want to use the control panel and see all the functions, you just need to touch any button to wake up the panel.

FREEZE CONTROLFreeze Control is an advanced technology that reduces temperature fluctuations in the whole freezer compartment to minimum, thanks to an innovative air system, totally independent from the fridge. Freeze burns are reduced up to 60% and food preserves its original quality and color.

To activate/deactivate the Freeze Control press the FREEZE CONTROL button (icon) .The function works properly in a defined range of temperature: between ‐22°C and ‐24°C. In case of Fast freezing is engaged, the function “Freeze control” is inhibited until the Fast Freezing function switched off.

6TH SENSE FRESH CONTROLThis function automatically works to ensure the optimal conditions to preserve the stored food. If there are any variations, 6th Sense Fresh Control immediately restores the ideal conditions. Results are outstanding: freshness preserved at best throughout the fridge cavity up to 4 times longer.

FAST COOL Using Fast Cool function it is possible to increase the cooling in the refrigerator compartment. The use of this function is recommended when placing a very high quantity of food in the refrigerator compartment. Press the Fast Cool button to activate Fast Cool function. When activated, the Fast Cool indicator will turn on. The function is automatically disabled after 6 hours, or can be manually disabled by pressing Fast Cool button.

FAST FREEZE The use of this function is recommended when placing a very high quantity of food to be frozen in the freezer compartment. 24 hours before freezing fresh food, press the Freezer button to activate the Fast Freeze function. When activated, the Fast Freeze indicator turns on. After 24 hours place the food to be frozen in the middle freezing zone of freezer compartment. The function is automatically disabled after 48 hours, or can be manually disabled by pressing Fast Freeze button.

EN

5

ACTIVE 0 COMPARTMENT The Active 0 compartment is specifically designed to maintain a low temperature and a suitable humidity level, in order to keep foods fresher for longer (e.g. meat, fish, cold cuts ).Activating and deactivating the compartmentTo activate/deactivate the Active 0 compartment, press the dedicated button on the control panel.

FAN + ANTIBACTERIAL AIR FILTERThe Fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food.If the appliance has the Fan it can be equipped with the antibacterial filter.Remove it from the box placed in the crisper drawer and insert into the fan cover.The replacement procedure is included in the filter box.The air filter symbol is lit on to indicates that it is expired and need to be replaced. The filter expires in 6 months. The User Interface gives a visual feedback, without acoustic alarm. On text display show message “Replace air filter”. After replaced the filter, press Stop Alarm button to reset message on the text display/antibacterial air filter indicator.

REMOTE CONTROLIf Your refrigerator is connected to Internet, it allows You to operate and monitor the appliance remotely using a smart device.To enable Remote Control:• Make sure router is ON• Press connectivity button for 3 seconds until a single

tone is emitted . At this point the connectivity symbol is blinking WPS icon switch ON to indicate that theprocedure has started.

• Press WPS button on Your router• WPS indicator switch ON on user panel inform about the

connection status. WPS timeout has a duration of 2’30”.• After successfully completed process WPS icon switch

OFF,connectivity button solid ON.• The refrigerator is now in Remote Control mode and is

ready to be operatedvia App.• The installation procedure need to be performed one

time.• If the router hasn't WPS button there is an alternative way

to connect the appliance with home wireless net see User & Care.

Use the Whirpool App to control the appliance by remote , so You can :

– check your fridge and activate options also when you are out of home

– manage of food inventory and shopping list, receiving notification about food

– expiring - access additional functions as for instance the smart party mode

– optimize energy consumptions leveraging the best energy tariff

– access further information on best use of your fridge and suggestions for best preservation

– receive feedback about fridge status in case of alarms While using Smart control of appliance all keys on user interface are enable.

For more information about provisioning process follow the app instructions or see the User Care Guide.

QUICK IDENTIFICATION OF CONNECTION STATE ON APPLIANCE’S

Connection button state Connection descriptions

blinks fast Appliance searching connection to router

blinks slowlyAppliance is connected with router but it is not able to connect server (for example ADSL not working)

ON solidAppliance is connected to server and server recognize the appliance

REFRIGERATOR LIGHTThe light system inside the refrigerator compartment uses LEDs light, allowing a better lightning as well as a very low energy consumption.If the LED light system does not work, please contact the Service to replace it.

Important: The refrigerator compartment light switches on when the refrigerator door is opened. If the door is kept open for more then 10 minutes the light will be automatically switched off.

FAN + ANTIBACTERIAL FILTERThe Fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. If the appliance has the Fan it can be equipped with the antibacterial filter.Remove it from the box placed in the crisper drawer and insert into the fan cover.The replacement procedure is included in the filter box.

6

QUICK ICEHOW TO MAKE ICE CUBESPut the empty ice cube trays into the freezer 24 hours before using the Quick Ice feature to cool them down. To achieve the best performance of the Quick Ice trays it is recommended to keep them permanently in the freezer and maintain temperature setting at -18°C or colder.Remove a Quick Ice tray by pulling it towards you.

Remove the cover and fill the tray with potable water (maximum level = 2/3 of the overall capacity of the tray).

Insert the cover back into the tray and insert it back into the dedicated slots in the top freezer drawer. Take care not to spill water.

Wait at least 30 minutes until the ice cubes are formed (this time can be slightly longer if the trays are used immediately after the first use).

EN

7

ALARM TABLE

ALARM TYPE Signal Cause Cure

Door open alarm

The acoustical alarm is activated and the Alarm Indicator blinks.

The Fridge or Freezer door has remained open for more than 2 minutes.

Close the door or press the Stop Alarm to mute the acoustical alarm.

Temperature alarm

The freezer Temperature display blinks (°C) and the Alarm Indicator remains on.

The inside temperature is not adequate

Press the Stop Alarm button ; the acoustical alarm stops, the Temperature Display (°C) blinks and the Alarm Indicator remains on until a temperature < -10°C is reached.

Antibacterial air filter alarm

The Antibacterial filter alarm indicator lit on

Finished the validity of Antibacterial air filter.

Replace the Antibacterial air filter, press the Alarm button to reset it.

Long black-out alarm

The Black Out Alarm icon remains on, the Alarm indicator

blinks and the Temperature display (°C) blinks, showing the maximum temperature reached during blackout.

Prolonged power failure, able to cause the inside temperature to increase to 0°C.

Press the Stop Alarm button ; the acoustical alarm stops.

Malfunction The letter “F” blinks on the display (°C).

Product malfunction. Contact the After-sales Service.

SOME OF THE FUNCTIONAL SOUNDS YOU MIGHT HEAR

A hissing sound when switching on the appliance for the first time or after a long pause.

A gurgling sound when refrigerant fluid enters into the pipes.

BRRR sound is from the compressor running.

Buzzing sound when water valve or fan start working.

A cracking sound when compressor starts.

The CLICK is from the thermostat which adjusts how often the compressor is running.

8

HOW TO STORE FOOD AND BEVERAGE Legend

TEMPERATE ZONESuggested for the storage of tropical fruit, cans, drinks, eggs, sauces, pickles, butter, jam

COOL ZONESuggested for storage of cheese, milk, dairy food, delicatessen, yogurt

COOLEST ZONESuggested for the storage of fish, meat, cold cuts. When Active 0° function is deactivated, this drawer can be used to store also other type of food, as well as winter fruit, dessert.

FRUIT & VEGETABLE DRAWER

FREEZING ZONE DRAWER (MAX COOL ZONE) Suggested to freeze fresh/cooked food.

FREEZER DRAWERS

Note: The Grey tone of the legend doesn’t match with the color of drawers

FRIDGE COMPARTMENT

Use recyclable plastic, metal, aluminum and glass containers and cling film to wrap foods.

Always use closed containers for liquids and for food that may give off or be tainted by odor or flavor transfer or cover them.

If you have a little quantity of food to store in the refrigerator, we recommend to use the shelves above the crisper for fruits and vegetables since this is the coolest area of the compartment.

Foods which give off a large amount ethylene gas and those that are sensitive to this gas, such as fruit, vegetables and salad, should always be separated or wrapped so as not to reduce the storage life; for example do not store tomatoes together with kiwi fruits or cabbage.

To avoid bottles falling over, you can use the bottle holder (available on selected models).

Do not store food too close together to enable sufficient air circulation.

FREEZER COMPARTMENT

The freezer is the ideal storage location for store frozen food, make ice cubes and freeze fresh food in the freezer compartment.The maximum number of kilograms of fresh food that can be frozen within a 24-hour period is indicated on the rating plate (…kg/24h).If you have a little quantity of food to store in the freezer, we recommend to use the coldest areas of your freezer compartment, corresponding to the middle area.

011

4 0 0 0 1 0 8 7 2 8 3 5Printed in Italy

PRODUCT FICHEWWW The product fiche with energy data of this

appliance can be downloaded from Whirlpool website http : / / docs . whirlpool . eu

HOW TO OBTAIN THE USE AND CARE GUIDE> WWW Download the Use and Care Guide from our website http://docs.whirlpool.eu (you can use this QR Code), specifying the product’s commercial code.> Alternatively, contact our Client After-sales Service.

CONTACTING OUR AFTER-SALES SERVICEYou can find our contact details in the warranty manual. When contacting our Client After-sales Service, please state the codes provided on your product's identification plate.