www.jumo.net
Dairy TechnologyInnovative solutions for your success
2 3
Dear Reader,
Dairy products are a permanent part of our everyday life. But only manufacturers know how much the production and pro-cessing of food depends on processes that run reliably and measurement technology that works accurately.
Your reliable partner JUMO is always at your side to help when you have questions and to provide quick solutions whether you want to monitor and record pressure, temperature, conduc-tivity, or pH value in your processes or control and document entire cleaning processes. JUMO can help you to lower pro-duction costs.
So how do we do it? By applying years of experience and pro-fessional expertise. JUMO has been a leading manufacturer of measurement and control systems for more than sixty years and has also been a competent partner for the food industry during that time.
We place special emphasis on regular new development cy-cles, continuous improvement in existing products and cons-tantly making production methods more economical. This is the only way we will achieve the highest level of innovation.
JUMO offers you only the best in dairy technology as well – a wide range of diverse applications and support in implemen-ting HACCP concepts or the IFS standard.
This brochure will give you an overview of JUMO products and systems for the dairy industry. Of course we would also wel-come the opportunity to get together with you to develop in-dividually customized solutions that meet your requirements.
The ultimate result of these solutions is consistently good quality!
Best regards, Christina Hoffmann
P.S.: For detailed information about our products ar-ranged by type and product group number, please visit www.industry.jumo.info.
Dipl.-Ing. Christina HoffmannMarket Segment Manager Pharma and FoodPhone: +49 661 6003-9384 Email: [email protected]
2 3
Contents
Milk Processing 4
Storage 6
Separating 7
Homogenizing 8
Pasteurizing / heat treatment 8
Filling 9
The Yogurt Production Process 10
Evaporation 12
Fermentation 12
Mixing 13
The Cheese Production Process 14
Cheese vat 16
Salting 17
Ripening / storage 17
CIP Cleaning 18
4 5
Milk ProcessingHygiene is essential in dairies. Milk is a sensitive product that requires special protection against contamination. JUMO sensors for hygienic applications sup-port you across the entire milk processing line.
4 5
Milk processingMilk processing involves the basic pro-cesses of storage, separation, homo-genization and pasteurization. These processes also play a major role in yogurt, butter and cheese making. Precedence is therefore given to them on the following pages as the standard processes of dairy technology.
The process of yogurt production is de-scribed as typical for the preparation of fermented products. The use of diffe-rent bacterial cultures, for example, or changing the sequence of the sub-pro-cesses produces semi-solid yogurt or drinking yogurt.
Cheese products are also presented typically for all common varieties of cheese. Not every process is used for every product. Quark and cream cheese require pasteurization, for ex-ample, but these types do not undergo ripening. Again, for other sorts of cheese, such as pasta filata varieties, the cheese curd is subjected to a cook-ing and stretching process to obtain an elastic-textured cheese.
Separating � Temperature � Pressure � Indicator � Controller
Homogenizing � Temperature � Pressure � Controller � Recorder
Pasteurizing / Ultra-high temperature processing / Cooling
� Temperature � Pressure � Controller � Recorder
Filling � Temperature � Pressure � Recorder
Raw milk storage � Temperature � Filling level � Indicator � Controller
Standardizing
Milk processingStorage Separating Homogenizing Pasteurizing / Ultra-high-temperature processing / Cooling Filling
6 7
refore ideally suited for use in hygienically sensitive areas. The compact case has half the overall depth and can also be used when conditions for mounting are restricted.Hygienic process connections and a surface roughness ≤ 0,8 µm guarantee you have the highest process reliability.
Monitoring filling levels with the JUMO dTRANS p20The filling level in storage and sterile tanks in dairies is measu-red by means of hydrostatic pressure. The JUMO dTRANS p20 process pressure transmitter combines maximum precision with easy operation, featuring fast and convenient rotary knobs for making entries. The enclosure and sensors are made of high-quality stainless steel. The pressure transmitter is the-
Storage
JUMO SVS3000Process visualization software Type 700755
JUMO dTRANS p20Process pressure transmitterType 403025
JUMO RTD temperature probeType 902810
JUMO dTRON 304Compact controllerType 703044
6 7
JUMO SVS3000Process visualization software Type 700755
JUMO Dtrans T100 Screw-in RTD temperature probeType 902815
JUMO dTRON 304Compact controllerType 703044 JUMO DELOS SI
Precision pressure transmitterType 405052
Separating
Pressure monitoring in skim milk runoff with the JUMO DELOS SI after separationIt is important to monitor the pressure in the skim milk runoff to ensure consistent standardization. Regardless of any pressure or flow rate fluctuations that may occur after passing through the separator, a constant pressure must be maintained in the skim milk runoff.The JUMO DELOS SI electronic precision pressure transmit-
ter is a true multi-talent, with switching contacts, analog output, and a bright LC display for visualization of the cur-rent process pressure and switching contact states. Use of high-quality stainless steel and front-flush measuring sys-tems without seals make this device ideally suited for use in hygienically sensitive areas.
Milk processingStorage Separating Homogenizing Pasteurizing / Heat treatment Filling
8 9
Pasteurizing / heat treatmentMonitoring temperature with the JUMO LOGOSCREEN ntThe JUMO LOGOSCREEN nt is ideally suited for recording the temperature during pasteurization. The instrument meets the guidelines laid down by the Heating Committee with regard to mea-surement, control and safety equipment for milk heating systems. (EU regula-tion EC Nos. 852 / 2004 and 853 / 2004). Equally impressive is the high enclosure protection provided by the JUMO LOGO-SCREEN nt stainless steel case.
HomogenizingPressure control with the JUMO IMAGO 500Accurate pressure control and monito-ring during homogenization guarantees that this process is always performed efficiently enough to achieve the desired result. In cream production, for example, homogenization sets the viscosity. Using JUMO IMAGO 500 process and program controller to control the pressure varia-ble during this part of production is the easiest solution. This makes it possible to connect several homogenizers imme-diately.
JUMO IMAGO 500Multi-channel process and program controllerType 703590
JUMO LOGOSCREEN ntPaperless recorder
with stainless steel frontType 706581
JUMO dTRANS p30Pressure transmitterType 404366
Membrane pressure separa-tor for homogenizers
JUMO DELOS SI Precision
pressure transmitterType 405052
JUMO dTRON 304Compact controllerType 703044
JUMO RTD temperature probe
for food use Type 902810
JUMO LOGOSCREEN ntPaperless recorder
with stainless steel frontType 706581
8 9
Recording filling conditions with JUMO LOGOSCREEN ntAseptic operation is most often the rule for filling systems in a dairy. This means that the measurement technology in use there must maintain the highest stan-dards of hygiene.Production in aseptic filling systems uses the HTST principle (High Tempe-rature / Short Time). This means that precise control must be accompanied by reliable recording to guarantee the traceability of the aseptic filling process. JUMO LOGOSCREEN nt can record all the parameters. Should the system stop, the integrated web server function immediately generates and sends an email.The JUMO LOGOSCREEN nt meets the hygiene requirements of the food indus-try and at the same time it is resistant to aggressive cleaning agents.
Filling
JUMO LOGOSCREEN ntPaperless recorder with stainless steel frontType 706581
JUMO dTRON 304Compact controller
Type 703044
JUMO RTD temperature probefor food use Type 902810
JUMO DELOS SI Precision pressure transmitterType 405052
Milk processingStorage Separating Homogenizing Pasteurizing / Heat treatment Filling
10 11
The Yogurt Production ProcessYoghurt production is a sensitive process. The quality of the final product depends on the temperature. Reliable sensors from JUMO help you produce a high-value premium product.
10 11
Preheating � Temperature � Pressure � Controller � Indicator � Recorder
Yogurt productionYogurt production is used as an example of production for all fermented products. The yoghurt type defines the standardi-zed fat content of the processed milk. It does not matter whether you are ma-king semi-solid yogurt, stirred yogurt, drinking yogurt or another fermented product such as sour cream, creme frai-che, kefir, buttermilk or sour milk, the core process is the same. The milk is adjusted to the required fat content for the desired end product. After homogenization and pasteuriza-tion the bacterial culture specific to the particular product is added to the milk and incubated. Once products reach the optimum pH value they are cooled, a fruit mixture is added if required and then filling takes place. This is usually under aseptic con-ditions to avoid recontamination.
Note:The following pages only show the pro-cesses that have not been described in “Milk Processing”.
Evaporation � Temperature � Filling level � Indicator � Controller
Homogenizing � Temperature � Pressure � Controller � Recorder
Fermentation � Temperature � Filling level � pH value � Controller � Recorder
Pasteurisieren � Temperatur � Druck � Regler � Registriergerät
Cooling � Temperature � Pressure � Controller � Recorder
Mixing with fruit preparation
� Temperature � Filling level � Controller
Filling � Temperature � Pressure � Recorder
The yogurt production processPreheating Evaporation Homogenizing Pasteurizing Fermentation Cooling Mixing Filling
Culture
12 13
EvaporationMonitoring the increase in dry matter by temperature The fat content and dry matter of the milk used in yogurt production are standardized. Standardizing the dry matter improves the yogurt gel. There are various ways to perform this stan-dardization. The most common way is to increase the dry matter of the milk by evaporation in a vacuum chamber. This process is monitored by means of the temperature at inflow. The degree of evaporation is determined by the di-stance covered by the heated milk in the evaporator.
FermentationMonitoring of fermentation / incubationOnce the relevant yogurt culture has been added to the milk, incubation fol-lows. The end of the incubation phase is often controlled by the pH value. As soon as the pH value reaches 4.2 to 4.5, the yogurt must be cooled from the in-cubation temperature to between 15 °C to 22 °C so that acidification is stopped. JUMO tecLine pH electrodes in a hygi-enic process fitting can safely monitor this process.
JUMO dTRON 304Compact controllerType 703044
JUMO SVS3000Process visualization software Type 700755
JUMO ecoTRANS Lf03Transmitter for conductivityType 202732
JUMO RTD temperature probeType 902810
JUMO DELOS SIPressure transmitterType 405052
JUMO tecLine Lf-VA Conductivity measuring cellType 202924
JUMO LOGOSCREEN ntPaperless recorder with stainless steel front Type 706581
JUMO DELOS SI Pressure transmitter Type 405052
Culture
JUMO RTD temperature probeType 902810
JUMO tecLine pHpH combination electrode Type 201020
JUMO dTRANS pH 02Transmitter / controller seriesType 202551
JUMO process fittingType 202825
JUMO dTRON 308 QCompact controllerType 703043
12 13
Mixing the yogurt with the fruit preparation The fruit preparation is mixed into the finished yogurt before filling takes place. As there is a high risk of recontamina-tion associated with this process, the fruit preparation must be heat-treated enough beforehand to kill all the vege-tative micro-organisms without impai-ring the taste and texture of the fruit preparation.
It is crucial to monitor the pH value of the different fruit preparations as a pH value that is too low afterwards can have a negative effect on fermentation.
Mixing
JUMO SVS3000Process visualization software Type 700755
JUMO dTRON 304Compact controllerType 703044
JUMO Dtrans T100Screw-in RTD temperature probeType 902815
JUMO dTRANS p20Pressure transmitterType 403025
JUMO tecLine pHpH combination electrode Type 201020
JUMO dTRANS pH 02Transmitter / controller seriesType 202551
JUMO process fittingType 202825
JUMO tecLine pHpH combination electrode Type 201020
The yogurt production processPreheating Evaporation Homogenizing Pasteurizing Fermentation Cooling Mixing Mixing
14 15
The Cheese Production ProcessTwo measurement variables that play an important role in cheese production are temperature and pH value. With solutions from JUMO you can control and monitor your production process flawlessly.
14 15
Cheese production The simplified cheese production process depicted here is used as an example of all common cheese va-rieties (whether hard cheese, cheese slices, soft cheese, cream cheese or quark). Of course, the production pro-cesses do vary. With quark and cream cheese, for example, there is no ri-pening.
Once the milk is delivered, if it cannot be processed immediately, it is first thermi-zed. Thermization slows down bacterial growth, thus allowing for a longer pro-cessing time. Depending on which cheese is being made, before curdling, the milk is stan-dardized, pasteurized and even so-metimes, for special semi-soft cheese slice varieties, partly homogenized. In the cheese making machine curdling is achieved by relevant bacterial cultures or rennet. The cheese curd is then cut up with a so-called cheese harp to make it easier for the whey to escape. After the whey has escaped the cheese curd is shaped, pressed, salted and stored for ripening.
Note:The following pages only show the pro-cesses that have not been described in “Milk Processing”.
Thermization � Temperature � Pressure � Controller
Storage � Temperature � Filling level � Indicator � Controller
Cheese vat � Temperature � pH value � Controller
Pasteurizing � Temperature � Pressure � Controller � Recorder
Separating � Temperature � Pressure � Controller
Shaping / pressing � Pressure
Salting � Temperature � Conductivity � pH value � Controller
Ripening / storage � Temperature � Relative humidity � Controller � Recorder
Rennet and culture
Whey
The cheese production processThermization Storage Pasteurizing Separating Cheese making machine Shaping / pressing Salting Ripening / storage
16 17
Cheese vatpH value and temperature control in the cheese vat The pH value and temperature in the cheese vat have to be controlled and recorded. The two measurement varia-bles are parameters for the later quality of the cheese and determine the steps of the process that are to follow. For ex-ample, the duration of the stirring period depends on the required level of acidity. The temperature / time diagram is de-termined by the method of heating and the variety of cheese. The combination of a hygienic temperature probe and the JUMO dTRON compact controller allows fast temperature recording and optimi-zed control. This also makes it possible to save energy, as unnecessarily long switching and heating periods are avoi-ded.
JUMO LOGOSCREEN ntPaperless recorder with stainless steel frontType 706581
JUMO dTRON 304Compact controllerType 703044
Rennet and culture JUMO dTRANS pH 02
Transmitter / controller seriesType 202551
JUMO RTD temperature probeType 902810
Thermization Storage Pasteurizing Separating Cheese making machine Shaping / pressing Salting Ripening / Storage
Whey
Cheese curd ISFET pH electrodeNon-glass sensor Type 201050
16 17
JUMO dTRANS pH 02Transmitter / controller seriesType 202551
Monitoring salt concentration in the salt bath via conductivity with the JUMO CTI-750Measuring salt concentration in the salt bath via conductivity with the JUMO CTI-750. There are several reasons for sal-ting the cheese loaf, the most important being to achieve the right product con-sistency. During this process sodium from the salt is deposited in the cheese, which consistently changes the concen-tration of salt in the brine. The process must be monitored. This can be done with the JUMO CTI-750 inductive con-ductivity transmitter. The temperature is measured at the same time, as the dura-tion of the cheese loaf in the brine also depends on this process variable.
Salting
Ripening / storageMonitoring temperature and moisture during ripening Different storage conditions are required for different cheese varieties. The important measurement variables during ripening are temperature, relative humidity and time.To ensure optimum and reproducible ripening those measurement variables must be continually monitored and re-corded.
JUMO indoor, outdoor and duct RTD temperature probeType 902520 / 13
JUMO dTRON 304Compact controller Type 703044
JUMO LOGOSCREEN ntPaperless recorder with stainless steel front Type 706581
JUMO CTI-750 inductive conductivity transmitterType 202756
JUMO RTD temperature probeType 902810
JUMO AQUIS 500 pHTransmitter Type 202560
JUMO tecLine pHpH-Einstab- messkette Typ 201020
JUMO process fittingType 202825
JUMO dTRON 304Compact controllerType 703044
The cheese production processThermization Storage Pasteurizing Separating Cheese making machine Shaping / pressing Salting Ripening / Storage
18 19
Cleaning in Place (CIP)Hygienic and perfectly cleaned plants are the basis of any good process. This is ensured by CIP (Cleaning in Place) cleaning. JUMO also offers top-quality, reliable systems and solution for you in this area.
18 19
Measure – control – display – record New possibilities with JUMO AQUIS touch SThe JUMO AQUIS touch S is a modular multi-channel mea-suring device that allows for new approaches in CIP clea-ning. For example, you can measure, control, display locally and record the concentration adjustment of acidic and lye solutions, the filling level of the two tanks and the flow velo-city – all with one device. Normally up to four analog analysis sensors and as many as ten parameters can be measured and managed simultaneously. In addition to numerous alarm, limit value or time-control-led switching functions, up to four higher-order loops can be defined simultaneously in the JUMO AQUIS touch S.
Protect resources – reduce maintenance costWhichever system you choose, the modular multi-channel device JUMO AQUIS touch S or the proven inductive conduc-tivity transmitter JUMO CTI-750, you have made an excellent investment. Both systems have impressive advantages. For example, the JUMO CTI-750 is the ideal solution if you are working with a PLC in the background. On the other hand, the JUMO AQUIS touch S works as a standalone solution. The low-main-tenance sensor and highly accurate, inductive measurement of conductivity help preserve resources and cut down on the maintenance overhead of your system.
JUMO MIDFlow transmitterType 406010
JUMO AQUIS 500Transmitter / Controller Type 202560
JUMO AQUIS touch SModular multi-channel measuring device for liquid analysis Type 202581
JUMO CTI-750Inductive conductivity transmitterType 202756
ISFET-pH-electrode Non-glass-sensorType 201050
JUMO tecLine Ci Hygienic inductive conductivity and temperature sensorType 202941
JUMO dTRANS p30Pressure transmitter Type 404366
JUMO CTI-750Inductive conductivity transmitterType 202756
Fresh water
Acid Rinsing water
Lye
from the plant
to the plant
waste water
Cleaning in place (CIP)
20 MFwww.jumo.netwww.jumo.net
PR 0
0061
EN
/005
3423
5/20
14-0
3-17
/V1