MAKING MODERN LIVING POSSIBLE

Solenoid valves 2/2-way servo-operated type EV220B 15-50

Technical leaflet

Technical leaflet Contents

Solenoid valves 2/2 way servo-operated type EV220B 15-50 EV220B 15-50B Normally Closed (NC) Page Introduction.............................................................................................................................................................................3 Features.....................................................................................................................................................................................3 Approvals..................................................................................................................................................................................3 Technical data.........................................................................................................................................................................4 Function...................................................................................................................................................................................4 Ordering....................................................................................................................................................................................5 EV220B 15-50B Normally Open (NO) Function....................................................................................................................................................................................6 Ordering...................................................................................................................................................................................6 EV220B 15-50BD for slightly aggressive liquids and gases Normally Closed (NC) Features.....................................................................................................................................................................................7 Technical data.........................................................................................................................................................................7 Ordering....................................................................................................................................................................................7 EV220B 15-50SS Normally Closed (NC) Features.....................................................................................................................................................................................8 Technical data.........................................................................................................................................................................8 Ordering....................................................................................................................................................................................9 Coil options..............................................................................................................................................................................9 Dimensions and weight....................................................................................................................................................10 -Accessories Manual override unit..........................................................................................................................................................11 Isolating diaphragm kit.....................................................................................................................................................11 Equalizing orifice.................................................................................................................................................................11 -Spare parts Spare parts kit NC................................................................................................................................................................1 Spare parts kit NO...............................................................................................................................................................1

IC.PD.00.D5.0 / 50B343

Danfoss A/S (AC-AKC / frz), 0 - 008

Technical leaflet Introduction

Solenoid valves 2/2 way servo-operated type EV220B 15-50

EV0B 15-50 is a universal indirect servooperated / way solenoid valve program.Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of applications can be covered. EV0B 15-50 valves are supplied complete or as separate components i.e valve body and coil, can be ordered separatly.

Features For robust industrial application For water, steam, oil, compressed air and gases Flow range for water: . to 160 m/h Differential pressure: Up to 16 bar Viscosity: Up to 50 cSt Ambient temperature: Up to +80C Media temperature from 30C to +140C Coil enclosure: Up to IP 67 Thread connections: From G to G Water hammer damped Built in filter for protection of pilot system Adjustable closing time available (see page 11) Also available with NPT thread. Please contact Danfoss.

Approvals

EPDM versions in Normally Closed (NC) valves are WRAS approved.ATTESTATION DE CONFORMITE SANITAIRE, ACS Body material B = Brass with EPDM seal material EV0B 15B EV0B 0B EV0B 5B EV0B 3B EV0B 40B EV0B 50B Body material SS = Stainless steel with EPDM seal material EV0B 15SS EV0B 0SS EV0B 5SS EV0B 3SS EV0B 40SS EV0B 50SS

Pressure Equipment Dirictive (PED) 97/3/EC Versions with UL approval can be supplied to order.

PASTWOWY ZAKAD HIGIENY, PZHBody material B = Brass with EPDM seal material EV0B 15B EV0B 0B EV0B 5B EV0B 3B EV0B 40B EV0B 50B Body material SS = Stainless Body material BD = steel with EPDM seal material Dezincification resistant brass with EPDM seal material EV0B 15SS EV0B 0SS EV0B 5SS EV0B 3SS EV0B 40SS EV0B 50SS EV0B 15BD EV0B 0BD EV0B 5BD EV0B 3BD EV0B 40BD EV0B 50BD

Danfoss A/S (AC-AKC / frz), 0 - 008

IC.PD.00.D5.0 / 50B343

3

Technical leaflet

Solenoid valves 2/2 way servo-operated type EV220B 15-50

Technical data

Main type Installation Pressure range Max. test pressure Time to open 1) Time to close 1) Ambient temperature

EV0B 15B EV0B 0B EV0B 5B EV0B 3B EV0B 40B Optional, but vertical solenoid system is recommended. EPDM/NBR: 0.3 - 16 bar 0.3 - 10 bar for liquids on NO versions FKM: 0.3 - 10 bar 5 bar 40 ms 40 ms 300 ms 1000 ms 1500 ms 350 ms 1000 ms 1000 ms 500 ms 4000 ms Type: BA 9 W ac/15 W dc Up to + 40oC Up to + 80oC Type: BB 10W ac/18 W dc Type: BE 10 W ac/18 W dc (IP67) Up to + 80oC Type: BG 1 Wac/0 W dc Up to + 80oC Type: BO 10 W ac/10 W dc Up to + 40oC Type:BP 16 W dc Up to + 55oC

EV0B 50B

5000 ms 10000 ms

Medium temperature

Viscosity Materials

EPDM: -30 - + 10oC and +140oC / 4 bar ( low pressure steam) FKM: 0 - +100oC and +60oC for water NBR: -10 - +90oC max. 50 cSt Valve body: Brass................... W.no. .040 Armature: Stainless Steel, W.no. 1.4105/AISI 430 FR Armature tube:Stainless Steel, W.no. 1.4306/AISI 304 L Armature stop: Stainless Steel, W.no. 1.4105/AISI 430 FR Springs Stainless Steel, W.no. 1.4310/AISI 301 O-rings: EPDM, FKM or NBR Valve plate: EPDM, FKM or NBR Diaphragm: EPDM, FKM or NBR

) The times are indicative and apply to water. The exact times will depend on the pressure conditions. Closing times can be changed by replacement of the equalising orifice.1

Function NC

Coil voltage disconnected (closed): When the voltage is disconnected, the valve plate (3) is pressed down against the pilot orifice (4) by the armature spring (). The pressure across the diaphragm (5) is built up via the equalising orifice (7). The diaphragm closes the main orifice (6) as soon as the pressure across the diaphragm is equivalent to the inlet pressure. The valve will be closed for as long as the voltage to the coil is disconnected. Coil voltage connected (open): When voltage is applied to the coil (1), the pilot orifice (4) is opened. As the pilot orifice is larger than the equalising orifice (7), the pressure across the diaphragm (5) drops and therefore it is lifted clear of the main orifice (6). The valve is now open for unimpeded flow and will be open for as long as the minimum differential pressure across the valve is maintained, and for as long as there is voltage to the coil.

1.Coil 2.Armature spring 3.Valve plate 4.Pilot orifice 5.Diaphragm 6.Main orifice 7.Equalising orifice

4

IC.PD.00.D5.0 / 50B343

Danfoss A/S (AC-AKC / frz), 0 - 008

Technical leaflet Ordering NC

Solenoid valves 2/2 way servo-operated type EV220B 15-50

Connection ISO8/1

Seal material EPDM1) NBR) FKM3) EPDM1) NBR) FKM3) EPDM1) NBR) FKM3) EPDM1) NBR) FKM3) EPDM1) NBR) FKM3) EPDM1) NBR) FKM3)

kv value [m3/h]

Media temp. Min. [oC] -30 -10 0 -30 -10 0 -30 -10 0 -30 -10 0 -30 -10 0 -30 -10 0 Max. [oC] +104) +90 +1005) +104) +90 +1005) +104) +90 +1005) +104) +90 +1005) +104) +90 +1005) +104) +90 +1005)

Type designation Main type EV0B 15B EV0B 15B EV0B 15B EV0B 0B EV0B 0B EV0B 0B EV0B 5B EV0B 5B EV0B 5B EV0B 3B EV0B 3B EV0B 3B EV0B 40B EV0B 40B EV0B 40B EV0B 50B EV0B 50B EV0B 50B Specification G 1E NC000 G 1N NC000 G 1F NC000 G 34E NC000 G 34N NC000 G 34F NC000 G 1E NC000 G 1N NC000 G 1F NC000 G 114E NC000 G 114N NC000 G 114F NC000 G 11E NC000 G 11N NC000 G 11F NC000 G E NC000 G N NC000 G F NC000

Pressure range all coil types Min. Max.6) [bar] 0.3 [bar] 16 16 10 16 16 10 16 16 10 16 16 10 16 16 10 16 16 10

Code no. without coil

G

4

032U7115 032U7170 032U7116 032U7120 032U7171 032U7121 032U7125 032U7172 032U7126 032U7132 032U7173 032U7133 032U7140 032U7174 032U7141 032U7150 032U7175 032U7151

G

8

0.3

G1

11

0.3

G1

18

0.3

G1

4

0.3

G

40

0.3

)EPDM is suitable for water and steam (steam max. +140 C / 4 bar). )NBR is suitable for oil, water and air 3)FKM is suitable for oil and air. For water at max. +60 C 4)Low pressure steam, 4 bar:Max. +140C1

BA ac/dc and BB/BE dc coils: Max. +100C BO and BP coils: Max. +90C 5)For water: Max. +60C BO and BP coils: Max. +90C 6)For higher differential pressure than stated, please contact Danfoss.

Danfoss A/S (AC-AKC / frz), 0 - 008

IC.PD.00.D5.0 / 50B343

5

Technical leaflet

Solenoid valves 2/2 way servo-operated type EV220B 15-50

Function NO

Coil voltage disconnected (open): When the voltage to the coil () is disconnected, the pilot orifice (4) is open. As the pilot orifice is larger than the equalising orifice (7), the pressure across the diaphragm (5) drops and therefore it is lifted clear of the main orifice (6). The valve will be open for as long as the minimum differential pressure across the valve is maintained, and for as long as the voltage to the coil is disconnected. Coil voltage connected (closed): When voltage is applied to the coil, the valve plate (3) is pressed down against the pilot orifice (4). The pressure across the diaphragm (5) is built up via the equalising orifice (7). The diaphragm closes the main orifice (6) as soon as the pressure across the diaphragm is equivalent to the inlet pressure. The valve will be closed for as long as there is voltage to the coil.

1.Armature 5.Diaphragm 2.Coil 6.Main orifice 3.Valve plate 7. Equalising orifice 4.Pilot orifice

Ordering NO

Connection ISO8/1

Seal material

kv value [m3/h]

Media temp. Min. [oC] -30 -10 0 -30 -10 0 -30 -10 0 -30 -10 0 -30 -10 0 -30 -10 0 Max. [oC] +104) +90 +1005) +104) +90 +1005) +104) +90 +1005) +104) +90 +1005) +104) +90 +1005) +104) +90 +1005)

Type designation Main type EV0B 15B EV0B 15B EV0B 15B EV0B 0B EV0B 0B EV0B 0B EV0B 5B EV0B 5B EV0B 5B EV0B 3B EV0B 3B EV0B 3B EV0B 40B EV0B 40B EV0B 40B EV0B 50B EV0B 50B EV0B 50B Specification G 1E NO000 G 1N NO000 G 1F NO000 G 34E NO000 G 34N NO000 G 34F NO000 G 1E NO000 G 1N NO000 G 1F NO000 G 114E NO000 G 114N NO000 G 114F NO000 G 11E NO000 G 11N NO000 G 11F NO000 G E NO000 G N NO000 G F NO000

Pressure range all coil types Min. [bar] 0.3 Max.6) [bar]7) 16 16 10 16 16 10 16 16 10 16 16 10 10 10 10 10 10 10

Code no. without coil 032U7117 032U7180 032U7118 032U7122 032U7181 032U7123 032U7127 032U7182 032U7128 032U7134 032U7183 032U7135 032U7142 032U7184 032U7143 032U7152 032U7185 032U7153

G

EPDM1) NBR) FKM3) EPDM1) NBR) FKM3) EPDM1) NBR) FKM3) EPDM1) NBR) FKM3) EPDM1) NBR) FKM3) EPDM1) NBR) FKM3)

4

G

8

0.3

G1

11

0.3

G1

18

0.3

G1

4

0.3

G

40

0.3

)EPDM is suitable for water and steam (steam max. +140 C / 4 bar). )NBR is suitable for oil, water and air 3)FKM is suitable for oil and air. For water at max. +60 C 4)Low pressure steam, 4 bar: Max. +140C1

BA ac/dc and BB/BE dc coils: Max. +100C BO and BP coils: Max. +90C5

)For water: Max. +60C

BO and BP coils: Max. +90C6 7

)For higher differential pressure than stated, please contact Danfoss. )Only 10 bars on liquids

6

IC.PD.00.D5.0 / 50B343

Danfoss A/S (AC-AKC / frz), 0 - 008

Technical leaflet Features

Solenoid valves 2/2 way servo-operated type EV220B 15-50

EV220BD for slightly aggressive liquids and gases. For robust industrial application For neutral and slightly aggressive liquids and gases. Contact Danfoss if you are in doubt about the valves suitability for the medium in question. Differential pressure: Up to 16 bar Viscosity: Up to 50 cSt Ambient temperature: Up to +80C Media temperature: from 30 to +140C Coil enclosure: Up to IP 67 Thread connections: From G to G Water hammer damped Built in filter for protection of pilot system

Technical data

Main type Installation Pressure range Max. test pressure Time to open 1) Time to close 1) Ambient temperture

EV0B 15BD EV0B 0BD EV0B 5BD EV0B 3BD EV0B 40BD EV0B 50BD Optional, but vertical solenoid system is recommended. EPDM: 0.3 - 16 bar 5 bar 40 ms 40 ms 300 ms 1000 ms 1500 ms 5000 ms 350 ms 1000 ms 1000 ms 500 ms 4000 ms 10000 ms Type: BA 9 W ac/15 W dc Up to + 40oC Type: BB 10W ac/18 W dc Up to + 80oC Type: BE 10 W ac/18 W dc (IP67) Up to + 80oC Type: BG 1 Wac/0 W dc Up to + 80oC Type: BO 10 W ac/10 W dc Up to + 40oC Type:BP 16 W dc Up to + 55oC

Medium temperature EPDM: -30 - + 10oC and +140oC / 4 bar ( low pressure steam) Viscosity Materials max. 50 cSt Valve body: Dezincification resistant brass CuZn36PbAs/CZ13 Armature: Stainless Steel,.............................. W.no. 1.4105/AISI 430 FR Armature tube: Stainless Steel,.............................. W.no. 1.4306/AISI 304 L Armature stop: Stainless Steel,.............................. W.no. 1.4105/AISI 430 FR Springs Stainless Steel,.............................. W.no. 1.4310/AISI 301 Orifices: Stainless Steel,.............................. W.no. 1.4404/AISI 316L Valve seat: Stainless Steel,.............................. W.no. 1.4404/AISI 316L O-rings: EPDM Valve plate: EPDM Diaphragm: EPDM

) The times are indicative and apply to water. The exact times will depend on the pressure conditions. Closing times can be changed by replacement of the equalising orifice.1

OrderingConection ISO 8/1 G G G1 G1 G1 G1

Seal material

kvvalue [m3/h] 4 8 11 18 4 40

Media temp. Min. [oC] -30 -30 -30 -30 -30 -30 Max. [oC] +10) +10) +10) +10) +10) +10)

Type designation

Pressure range all coil typesMin. [bar] 0.3 0.3 0.3 0.3 0.3 0.3 Max.3) [bar] 16 16 16 16 16 16

Code no. without coil Approved by WRAS 032U5815 032U5820 032U5825 032U5832 032U5840 032U5850

Maintype EV0B 15BD EV0B 0BD EV0B 5BD EV0B 3BD EV0B 40BD EV0B 50BD

Specification G 1E NC000 G 34E NC000 G 1E NC000 G 114E NC000 G 11E NC000 G E NC000

EPDM1) EPDM1) EPDM1) EPDM1) EPDM1) EPDM1)

)EPDM is suitable for water and steam (steam max. +140 C / 4 bar). ) Low pressure steam, 4 bar: Max. +140C

BA ac/dc and BB/BE dc coils: Max. +100C BO and BP coils: Max. +90C 3) For higher differential pressure than started, please contact Danfoss. Danfoss A/S (AC-AKC / frz), 0 - 008

IC.PD.00.D5.0 / 50B343

7

Technical leaflet Features

Solenoid valves 2/2 way servo-operated type EV220B 15-50 EV220B Stainless Steel For robust industrial application For neutral and aggressive liquids and gases. Contact Danfoss if you are in doubt about the valves suitability for the medium in question. Differential pressure: Up to 16 bar Viscosity: Up to 50 cSt Ambient temperature: Up to +80oC Media temperature: from 30 to +140oC Coil enclosure: Up to IP 67 Thread connections: From G 1/ to G Water hammer damped Built in filter for protection of pilot system

Technical data

Main type Installation Pressure range

Max. test pressure Time to open 1) 1500 ms Time to close 1) 4000 ms oC Ambient temperature Type: BA 9 W ac/15 W dc Up to + 40 Type: BB 10W ac/18 W dc Up to + 80oC Type: BE 10 W ac/18 W dc (IP67) Up to + 80oC Type: BG 1 Wac/0 W dc Up to + 80oC Type: BO 10 W ac/10 W dc Up to + 40oC Type:BP 16 W dc Up to + 55oC Medium temperature EPDM: -30 - + 10oC and +140oC / 4 bar ( low pressure steam) FKM: 0 - +100oC and 60oC for water Viscosity Materials max. 50 cSt Valve body: Stainless Steel, W.no. 1.4581/AISI 318 Armature: Stainless Steel, W.no. 1.4105/AISI 430 FR Armature tube: Stainless Steel, W.no. 1.4306/AISI 304 L Armature stop: Stainless Steel, W.no. 1.4105/AISI 430 FR Springs: Stainless Steel, W.no. 1.4310/AISI 301 Orifices: Stainless Steel, W.no. 1.4404/AISI316L O-rings: EPDM or FKM Valve plate: EPDM or FKM Diaphragm: EPDM or FKM

EV0B 15SS EV0B 0SS EV0B 5SS EV0B 3SS Optional, but vertical solenoid system is recommended. EPDM : 0.3 - 16 bar FKM: 0.3 - 10 bar 5 bar 40 ms 40 ms 300 ms 1000 ms 350 ms 1000 ms 1000 ms 500 ms

EV0B 40SS

EV0B50SS

5000 ms 10000 ms

) The times are indicative and apply to water. The exact times will depend on the pressure conditions. Closing times can be changed by replacement of the equalising orifice.1

8

IC.PD.00.D5.0 / 50B343

Danfoss A/S (AC-AKC / frz), 0 - 008

Technical leaflet Ordering

Solenoid valves 2/2 way servo-operated type EV220B 15-50

Conection ISO 8/1

Seal material

kvvalue Min. [oC]

Media temp. Max. [oC] +103) +1004) +103) +1004) +103) +1004) +103) +1004) +103) +1004) +103) +1004)

Type designation

Pressure range all coil types Min. [bar] 0.3 0.3 0.3 0.3 0.3 0.3 Max.5) [bar] 16 10 16 10 16 10 16 10 16 10 16 10

Code no. without coil

Maintype EV0B 15SS EV0B 15SS EV0B 0SS EV0B 0SS EV0B 5SS EV0B 5SS EV0B 3SS EV0B 3SS EV0B 40SS EV0B 40SS EV0B 50SS EV0B 50SS

Specification G 1E NC000 G 1F NC000 G 34E NC000 G 34F NC000 G 1E NC000 G 1F NC000 G 114E NC000 G 114F NC000 G 11E NC000 G 11F NC000 G E NC000 G F NC000

G G G1 G1 G1 G

EPDM1) FKM) EPDM1) FKM) EPDM1) FKM) EPDM1) FKM) EPDM1) FKM) EPDM1) FKM)

4 8 11 18 4 40

-30 0 -30 0 -30 0 -30 0 -30 0 -30 0

032U8500 032U8506 032U8501 032U8507 032U8502 032U8508 032U8503 032U8509 032U8504 032U8510 032U8505 032U8511

1) EPDM is suitable for water and steam (steam max. +140 C / 4 bar). )FKM is suitable for oil and air. For water at max. +60 C 3) Low pressure steam, 4 bar:Max. +140C BA ac/dc and BB/BE dc coils: Max. +100C BO and BP coils: Max. +90C 4) For water: Max. +60C BO and BP coils: Max. +90C 5) For higher differential pressure than stated, please contact Danfoss.

Coil optionsDanfoss also offers hum-free coils for noise sensative applications and EEx m II T4 coils for use in explosion risk areas - please see coil data sheet IC.PD.600.A

Type: BA 9 W ac 15 W dc

Type: BB 10 W ac 18 W dc

Type: BE (IP67) 10 W ac 18 W dc

Type: BG 1 W ac 0 W dc

Ordering Coils

See separate data sheet for coils IC.PD.600.A

Danfoss A/S (AC-AKC / frz), 0 - 008

IC.PD.00.D5.0 / 50B343

9

Technical leaflet Dimensions and weight

Solenoid valves 2/2 way servo-operated type EV220B 15-50

Type EV0B 15 EV0B 0 EV0B 5 EV0B 3 EV0B 40 EV0B 50

L [mm] 80.0 90.0 109.0 10.0 130.0 16.0

B [mm] 5.0 58.0 70.0 8.0 95.0 113.0

B1[mm] Coil type BA 3 3 3 3 3 3 BP 45 45 45 45 45 45 BB/BE 46 46 46 46 46 46 BG/BO 68 68 68 68 68 68

H1 [mm] 15.0 18.0 .0 7.0 3.0 37.0

H [mm] 99.0 103.0 113.0 10.0 19.0 135.0

Weight without coil [Kg] 0.8 1.0 1.4 .0 3. 4.3

10

IC.PD.00.D5.0 / 50B343

Danfoss A/S (AC-AKC / frz), 0 - 008

Technical leaflet Accessories Manuel override unit

Solenoid valves 2/2 way servo-operated type EV220B 15-50 Used for manual override in event of power failure. Note: Valve height is increased by 16 mm.Material Brass Stainless steel Code no. 032U0150 032U0149

Isolating diaphragm kit

The isolating diaphragm design ensures that no fluid enters the armature area, which gives the following advantages: The valve is resistant to aggressive fluids, impurities in the fluid and to calcarous and scale deposits. The kit consists of assembled isolating unit, O-ring, 4 screws, locking button and nut for the coil. The kit can be used on all EV0B DN 15-50 and EV10B DN 1.5-3 valves.Seal material EPDM1) FKM) Code no. 042U1009 042U1010

1)EPDM is suitable for water. )FKM is suitable for oil and air. For water at max.+60oC

Equalizing orifice

The kit comprises an equalizing orifice including O-ring and gasket. The valves closing time can be changed by installing an equalizing orifice of a size which deviates from the standard valve:

-A shorter closing time is obtained with a larger orifice (the shorter closing time, the greater risk of water hammering) -A longer closing time is obtained with a smaller orifice.Code no. Brass 032U0082 032U0083 032U0084 032U0085 032U0086 032U0087 032U0681 032U0682 032U0683 DZR brass4) / Stainless steel 032U6310 032U6313 032U6311 032U6314 032U6312 032U6315 -

Orifice 0.5 0.5

Seal material EPDM 1) FKM) EPDM 1) FKM) EPDM 1) FKM) NBR3) EPDM 1) FKM)

Standard in EV0B 15 EV0B 0 EV0B 15 EV0B 0 EV0B 5 EV0B 3 EV0B 40 EV0B 5 EV0B 3 EV0B 50 EV0B 40 EV0B 50 -

0.8

1) Approved by WRAS. Approved by Attestation de Conformite Sanitaire (ACS) EPDM is suitable for water and steam (steam max. +140oC / 4 bar) ) FKM is suitable for oil and air. For water at max. +60oC. 3) NBR is suitable for oil, water and air. 4) Dezincification resistant brass.

1. 1. 1.4 Adjustable Adjustable Adjustable

Danfoss A/S (AC-AKC / frz), 0 - 008

IC.PD.00.D5.0 / 50B343

11

Technical leaflet Spare parts Spare parts kit (NC)

Solenoid valves 2/2 way servo-operated type EV220B 15-50

The kit comprises a locking button and nut for the coil, armature with valve plate and spring, O-ring for the armature tube, spring and diaphragm, two O-rings for the pilot system, and an O-ring and gasket for the equalising orifice.Brass versions Type EV0B 15 EV0B 0 Seal material EPDM 1) FKM ) NBR 3) EPDM 1) FKM ) NBR 3) EPDM 1) FKM ) NBR 3) EPDM 1) FKM ) NBR 3) EPDM 1) FKM ) NBR 3) EPDM 1) FKM ) NBR 3) Code no. 032U1071 032U1072 032U6013 032U1073 032U1074 032U6014 032U1075 032U1076 032U6015 032U1077 032U1078 032U6016 032U1079 032U1080 032U6017 032U1081 032U1082 032U6018

EV0B 5

EV0B 3

EV0B 40

EV0B 50

DZR brass 4) and stainless steel versions Type EV0B 15 EV0B 0 EV0B 5 EV0B 3 EV0B 40 EV0B 501

Seal material EPDM 1) FKM ) EPDM 1) FKM ) EPDM 1) FKM ) EPDM 1) FKM ) EPDM 1) FKM ) EPDM 1) FKM )

Code no. 032U6320 032U6326 032U6321 032U6327 032U6322 032U6328 032U6323 032U6329 032U6324 032U6330 032U6325 032U6331

) Approved by WRAS. Approved by Attestation de Conformite Sanitaire (ACS) EPDM is suitable for water and steam (steam max. +140C / 4 bar). )FKM is suitable for oil and air. For water at max. +60C 3 )NBR is suitable for oil, water and air 4 )Dezincification resistant brass

Spare parts kit (NO)

The kit comprises a locking button and nut for the coil, Armature unit assembly, O-ring for the armature unit.Type Seal material EPDM1) EV0B 15-50 FKM ) NBR3)1

Code no. 032U0296 032U0295 032U0299

)EPDM is suitable for water and steam (steam max. +140C / 4 bar). )FKM is suitable for oil and air. For water at max. +60C 3 )NBR is suitable for oil, water and air.

1

IC.PD.00.D5.0 / 50B343

Danfoss A/S (AC-AKC / frz), 0 - 008