Page 1
6CT8.3G2-I NT855G5-I NTA855G2-I
140 160 180 200 250 250 320
kVA 140 160 180 200 250 250 320
KWe 112 128 144 160 200 200 256
BHP 192 225 241 272 340 340 417
BHP 174 205 220 245 310 310 380
No. 6 6 6 6 6 6 6
Inline Inline Inline Inline Inline Inline Inline
"V" angle Deg.
Bore mm 114 114 114 114 114 140 140
Stroke mm 135 135 135 135 135 152 152
L 8.3 8.3 8.3 8.3 8.3 14.0 14.0
No. 16.8 : 1 16.8 : 1 16.8 : 1 16.8 : 1 15.35 : 1 14.0 : 1 14.0 : 1
kPa 1253 1474 1580 1763 2226 1319 1616
Anti Clock Anti Clock Anti Clock Anti Clock Anti Clock Anti Clock Anti Clock
Firing order 1-5-3-6-2-4 1-5-3-6-2-4 1-5-3-6-2-4 1-5-3-6-2-4 1-5-3-6-2-4 1-5-3-6-2-4 1-5-3-6-2-4
Aspiration T TA TA TAA TAA T
Piston speed M/Sec. 6.75 6.75 6.75 6.75 6.75 7.60 7.60
rpm 1650 1650 1650 1650 1650 1650 1650
Engine Model
6CTA8.3G1-I
6CTA8.3G2-I
6CTAA8.3G1-I
6CTAA8.3G4
Genset kVA Node (Prime)
Engine : Performance Data
50 Hz Genset Prime Power Rating
50 Hz Genset Prime Power Rating
Standby Power Rating at 1500 RPM
Prime Power Rating at 1500 RPM
No. of Cylinders
Configuration
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Displacement
Compression ratio
BMEP of the engine at rated load
Direction of rotation (from Flywheel end)
TA LTA 1P2L
Overspeed trip setting
Page 2
KWm 17 17 17 17 17 22 33.6
% 88.4% 90.0% 90.6% 91.5% 93.1% 91.3% 89.4%
kPa 10320 10940 11720 13300 13930 11720 12804
rpm 80000 90000 94000 90000 65600 71500
23.9 : 1 24.8 : 1 23.7 : 1 22.6 : 1 25.12 : 1 24.6 : 1 25.0 : 1
mm 1129 1129 1129 1129 1129 1175 1775
mm 711 711 711 711 711 890 890
mm 1171 1171 1171 1171 1171 1475 1475
kg 702 702 702 684 684 1270 1315
kg 766 766 766 760 760 1322 1620
kg 1453 1635
Nm 1356 1356 1356 1356 1356 1356 1356
mm 450 450 450 541 541 704 704
Friction horsepower
Mechanical efficiency
Maximum cylinder pressure @ rated
Turbocharger operating speed
Air Fuel Ratio
Engine : Physical Data
Length (Engine Only) w/o cooling system
Width (Engine Only) w/o cooling system
Height (Engine Only) w/o cooling system
Total dry weight of engine without cooling system
Total wet weight of engine with Radiator
Total wet weight of engine with Heat Exchanger
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Max. allowable static bending moment at the rear face of flywheel housing
Centre of Gravity from rear face of Fly. Hsg.
Page 3
mm 163 163 163 163 163 140 140
1.58 1.58 1.58 1.58 1.58 4.99 4.99
SAE # 2 2 2 2 2 1 1
SAE # SAE 11.5 SAE 11.5 SAE 11.5 SAE 11.5 SAE 11.5 SAE 14 SAE 14
mm 424 424 424 424 424 505 505
mm 73 73 73 73 73 105 105
No. 138 138 138 138 138 118 118
Kg (lb) 508 522 522 572 690
Kg (lb) 750 795 847 835 979
Kg (lb) 609 678 705 785 1502
Kg (lb) -390 -458 -491 -554 -811
Kg (lb) 791 887 918 954 1212
Kg (lb) -457 -537 -575 -649 -234
Centre of Gravity above crankshaft Centerline
Moment of Inertia of rotating components
Kg-m2
Flywheel housing
Flywheel dimension
Flywheel - Diameter
Flywheel - Width
Flywheel - No. of teethStatic & Dynamic Loads
(for standby rating for reference only)
Reaction at Front mounting bolts - 2 Bolts (static)
Not Available
Not Available
Reaction at Rear mounting bolts - 2 Bolts (static)
Not Available
Not Available
Dynamic loading at Front (vertical) - 1 Bolt
Not Available
Not Available
Dynamic loading at Front (horizontal) - 1 Bolt
Not Available
Not Available
Dynamic loading at Rear (vertical) - 1 Bolt
Not Available
Not Available
Dynamic loading at Rear (horizontal) - 1 Bolt
Not Available
Not Available
Cooling System
Radiator Cooling System Data
Page 4
1.35 : 1 1.35 : 1 1.35 : 1 1.35 : 1 1.35 : 1 0.81 : 1 1 : 1
Plastic Plastic Plastic Plastic Plastic Steel Aluminium
mm (inch) 660.4 (26") 660.4 (26") 660.4 (26") 685.8 (27") 900 ( 35") 1016 (40") 1067 (42")
KW 8 8 8 10 10.5 11.3 14.9
m 0.73 x 0.74 0.73 x 0.74 0.73 x 0.74 0.940 x 0.79 1.1 x 0.991
m
mm
liters 24.3 26.6 26.6 30.8 42 80
liters
Deg C 50 50 50 50 50 50 50
l/se(cfm) 5540(11736) 5540(11736)
psi 10 10 10 10 10 7 7
kg 40 40 40 190 255 145 145
kg 54.3 54.3 54.3 208 285 201 265
liters
liters
Fan Drive Ratio (Fan Speed:Engine speed)
Material of FanDiameter of Fan Fan Power Drawn Core Dimensions H x W - JW
1.079 x 1.268
1.175 x 1.219
Core Dimensions H x W x D - A/C (for LTA)
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Overall Dimensions H x W x D
1113x851x408
1113x851x408
1113x851x408
1272 x 1049 x 302
1451 x 1259 x 656
1575x1105x266
1648x1225x476
Coolant Capacity of Radiator - JW Circuit
Not Available
Coolant Capacity of Radiator - A/C Circuit (for LTA)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Ambient Capability of Radiator
Fan Air Flow across Radiator
5540 (11736)
6756 (14323)
11343 (23976)
10070 (21340)
10070 (21340)
Radiator Cap Pressure
Dry Weight of Radiator
Wet Weight of Radiator
Heat Exchanger Cooling System Data
Heat Exchanger Coolant Capacity - JW Circuit
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Available
Not Available
Heat Exchanger Coolant Capacity - A/C Circuit (for LTA)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Page 5
lpm 240 275
lpm 125
lpm 240 400@ 32 C
1 1
kg 230
kg 265
psi / kscm 50 / 3.5 50 / 3.5
Shell & Tube Shell & Tube
mm 9.5 9.5
psi 150 150
psi / kPa 150 150
mm
mm 50 65
mm --- 40
Min. Raw Water Flow Rate at Main HEX Inlet
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Min. Raw Water Flow Rate at Aftercooler HEX Inlet (for LTA)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Total Raw Water Flow Required (JW + A/C for LTA)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
No. of Passes - JW (& A/C for LTA)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Dry Weight of Heat Exchanger
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Available
Wet Weight of Heat Exchanger
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Available
Raw Water Pressure at HEX Inlet with Tolerance
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Type of HEX (Shell & Tube / Plate etc.)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Diameter of Tubes if Shell & Tube
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Design Pressure of HEX
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Test Pressure
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Connection Flange Details **
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
id - 75mm,13.5 drill 6-holes on 120 BC
dia-60.50 - 4 holes-
rectangular-13 thick
Recomm.Min.Raw Water In/Out Dia of Pipe JW Circuit
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Recomm.Min.Raw Water In/Out Dia of Pipe A/C Circuit
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Page 6
PPM 170 170
PPM 40 40
PPM 100 100
PPM 400 400
- PH value 6.5 to 7.5 6.5 to 7.5
HP 3 3
Deg C 32 32
Deg C 39 - 44 39 - 44
Deg C 7 -11 7 -11
TR 25 35
lit 10 12.3 12.3 10 10 18.9 21
lit 26.5 26.5 26.5 27.5 42 80 95
lit 47.3 40
KW 49 57 68 56 127 105 138
- Calcium/Magnesium hardness (as CaCO3 + MgCO3)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
- Chloride - PPM
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
- Sulphates (as SO4) - PPM
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
- Total dissolved solids - PPM
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Nominal Raw water pump - HP $$
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Raw Water Temperature at Inlet to H.Ex.
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Raw Water Temperature at Oultet of H.Ex.
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Typical delta T of raw water across H.Ex.
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Recommended cooling tower capacity - TR $$
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Coolant system
Coolant capacity (Engine only)
Coolant capacity with Radiator
Coolant capacity with Heat Exchanger(s)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Heat rejection to coolant total
Page 7
lpm 168 168 168 168 168 336 354
kPa (psi) 28 28 28 28(4) 28(4) 34 (5) 41(6)
m 18.3 18.3 18.3 18.3 18.3 18.3 18.3
Deg C 82 82 82 82 82 82 77
Deg C 95 95 95 95 95 93 89
Deg C 100 100 100 100 100 95 95
Deg C 50 50 50 50 50 50 50
lpm 20 20 20 20 20 20 20
minutes 1.2 1.2 1.2 1.5 2.1 5 5
% 5 5 5 5 5 5 5
minutes 25 25 25 25 25 25 25
Deg C 98 98 98 98 98 93 93
- Trip Deg C 103 103 103 103 103 95 95
Ratio 1 : 15 1 : 15 1 : 15 1 : 15
Coolant Water Pump Flow Rate
Max. coolant friction head external to engine
Max. static head of coolant above crank center
Start to Open Temperature - Thermostat
Fully Open Temperature - Thermostat
Maximum allowable top tank temperature
Minimum recomended coolant inlet temp.
Minimum fill rate
Maximum initial fill time
Min. coolant expansion space - % of system capacity
Maximum allowable deaeration time
High water temp safety limits
- Alarm (optional)
Coolant Additive Concentration
EG+Water+DCA4
EG+Water+DCA4
EG+Water+DCA4
Air Intake System
Page 8
3.7 (15) 3.7 (15) 3.7 (15) 3.7 (15) 3.7 (15) 3.7 (15) 3.7 (15)
6.22 (25) 6.22 (25) 6.22 (25) 6.22 (25) 6.22 (25) 6.22 (25) 6.22 (25)
Microns 15 15 15 15 15 15 15
Deg. C 123 92 94 58 51 124 68
kPa 105 134 146 131 229 116 136
CFM 338 405 417 421 605 594 716
9.6 11.5 11.8 11.9 17.1 16.8 20.3
1 1 1 1 1 1 1
2 2 2 2 2 2 2
Heavy Duty Heavy Duty Heavy Duty Heavy Duty Heavy Duty
gm/cfm 25 25 25 25 25 15 15
99.9 99.9 99.9 99.9 99.7 99.7 99.7
Cummins PT Cummins PT
Filter type Spin-on
Microns 10 10 10 10 10 10 10
PTG Auto PTG Auto
Max. Air intake restriction - with clean element
kPa (in H2O)
Max. Air intake restriction - with dirty element
kPa (in H2O)
Filtration capacity in microns
Intake manifold temperature ** (+/- 10%)
Intake manifold pressure (+/- 10%)
Combustion air inlet flow rate (+/- 5%)
Combustion air inlet flow rate (+/- 5%)
m3 / min
No. of air cleaners per engine
No. of elements per air cleaner
Type of Air Cleaner
Medium Duty
Medium Duty
Minimum dust holding capacity
Air Filter Efficiency
Fuel System
Fuel system type
Motorpal Mi Direct
Injection
Motorpal Mi Direct
Injection
Motorpal Mi Direct
Injection
Motorpal Mi Direct
Injection
Motorpal Mi Direct
Injection
Spin-on, Paper
Spin-on, Paper
Spin-on, Paper
Spin-on, Paper
Paper Element
Paper Element
Fuel Filtration Micron Size
Fuel Pump Type
Motoroal - Inline
Motoroal - Inline
Motoroal - Inline
Motoroal - Inline
Motoroal - Inline
Page 9
kPa (in Hg) 13.5 13.5 13.5 13.5 13.5 (4) (4)
kPa (in Hg) 27 27 27 27 27 (8) (8)
kPa (in Hg) (10) (10) (10) (10) (10) (6) (6)
Hrs. 300 300 300 300 300 300 300
Iph 208 208 208 208 208 216 382
psi 130-150 180-200
Nos. 1 1 1 1 1 1 1
Nos. 1 1 1 1 1 1 1
Hours 300 300 300 300 300 300 300
# (mm) # (9.5) # (9.5) # (9.5) # (9.5) # (9.5) 10 (12.7) 10 (12.7)
# (mm) # (9.5) # (9.5) # (9.5) # (9.5) # (9.5) 8 (10.3) 8 (10.3)
L 23.8 23.8 23.8 23.8 39 38.6 38.6
Fuel supply line restriction (Max. allowable with clean filter)
Fuel supply line restriction (Max. allowable with dirty filter)
Fuel return line restriction (Max. allowable with check valve)
Typical fuel filter change (Check gauge)
Fuel Pump flow (Max.)
Fuel Pump Pressure (Min.)
Not Available
Not Available
Not Available
Not Available
Not Available
Main Fuel Filters - Quantity/engine
Bypass Fuel Filters - Quantity/engine
Typical Fuel Filter Change Period
Minimum Fuel Supply Line Size# Hose (ID in mm)
Minimum Fuel Return Line Size# Hose (ID in mm)
Lub Oil System
Lube oil system capacity (Total with filters)
Page 10
L 15.1 15.1 15.1 15.1 31 28.4 19
L 18.9 18.9 18.9 18.9 35 36 26.5
Deg. 45 45 45 45 45 45 45
Deg. 45 45 45 45 45 45 45
Deg. 45 45 45 45 45 45 45
psi 40 - 60 40 - 60 40 - 60 40 - 60 40 - 60 35-45 35-45
psi 15 15 15 15 15 15 15
g/bhp-hr 0.4 0.4 0.4 0.4 0.4 0.27 0.27
lit / hr 0.08 0.10 0.10 0.12 0.15 0.10 0.12
Deg C 121 121 121 121 121 121 121
Spin-on Spin-on Spin-on Spin-on Spin-on
Nos. 1 1 1 1 1 1 1
Microns 30 30 30 30 30 30 30
Nos. Combo Combo Combo Combo Combo 1 1
Microns 5 5 5 5 5 5
Sump Capacity --- Low Mark Level
Sump Capacity -High Mark Level
Sump angle - Front down
Sump angle - Front-up
Sump angle - side to side
Oil pressure - rated speed (Range)
Oil pressure - low idle (Range)
Lube Oil Consumption (prime power)
Lube Oil Consumption (prime power)
Maximum Oil Temperature
Full flow lub oil filter type
Paper Element
Paper Element
Full flow lub oil filter - Quantity per engine
Full flow filter micron size(Absolute) - Micro mm
Bypass lub oil filter type
Cartridge Paper
Cartridge Paper
Cartridge Paper
Cartridge Paper
Not Applicable
Paper Element
Paper Element
Bypass filter - Quantity per engine
Bypass filter micron size (Absolute)
Not Applicable
Page 11
Open Open Open Open Open Open Open
Plate Plate Plate Plate Plate Shell & Tube Shell & Tube
API CH 4 API CH 4 API CH 4 API CH 4 API CH 4
Hours 300 300 300 300 300 300 300
Hours 300 300 300 300 300 300 300
Hours 300 300 300 300 300 300 300
V DC 24 24 24 24 24 24 24
No. 1 1 1 1 1 1 1
KW 4 4 4 4 4 7.5 7.5
amps. 45 45 45 45 45 45 30
amp.hr. 180 180 180 180 180 180 180
- Make Lucas - TVS Lucas - TVS Lucas - TVS Lucas - TVS Lucas - TVS Lucas - TVS Lucas
SA 23 SA 23 SA 23 SA 23 SA 23 AC5 AC5
amps 30 30 30 30 30 24 29
2 : 1 2 : 1 2 : 1 2 : 1 2 : 1 2 : 1
- Make Lucas - TVS Lucas - TVS Lucas - TVS Lucas - TVS Lucas - TVS Lucas - TVS Lucas - TVS
7 M 14 7 M 14 7 M 14 7 M 14 7 M 14 SM-130-PE SM-130-PE
Nos. 1 1 1 1 1 1 1
- Volts V DC 24 24 24 24 24 24 24
Crankcase ventilation type
Oil cooler type
Recommended lube oil grade
15 W 40 CF 4
15 W 40 CF 4
Lube Oil Change Interval
Lube Oil Filter Change Interval
Bypass Filter Change Interval
Starting System
System Voltage
No. of starter motors provided
Rating of Starter Motor
Battery charging alternator capacity
Battery Capacity
Battery charging alternator
- Model / Type
- Amperes @ rated speed
- Drive ratio - Alt : Eng spd.( alternator speed)
2.36 : 1 / 3545
Electrical Starter
- Model / Type
- Quantity per engine
Page 12
KW 4 4 4 4 4 7.5 7.5
138 138 138 138 138 118 118
12 12 12 12 12 11 11
rpm 150 150 150 150 150 150 150
ohm 0.002 0.002 0.002 0.002 0.002 0.002 0.002
50 50 50 50 50 50 50
- Make
NA NA
1 1
455 445
0.226 0.226
kPa 620 - 1035 620 - 1035
mm Hg 76 76 76 76 76 76 76
mm 101 101 101 101 125 125 125
Dry Dry
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt.
- KW rating
No. of teeth on flywheel ring gear
No. of teeth of starter motor
Min.cranking speed req'd for unaided start temp.- rpm
Max. allowable resistance of cranking circuit - Ohm
Battery lead size - mm2 mm2
Air starter (optional)
Not Available
Not Available
Not Available
Not Available
Not Available
Ingersoll - Rand
Ingersoll - Rand
- Model / Type
Not Available
Not Available
Not Available
Not Available
Not Available
- Quantity per engine
Not Available
Not Available
Not Available
Not Available
Not Available
Air receiver capacity (at 827KPa) - liters (for 6 starts ?)
Not Available
Not Available
Not Available
Not Available
Not Available
Free air quantity per start - m3/sec
m3/sec Not Available
Not Available
Not Available
Not Available
Not Available
Recommended Starting air pressure - kPa (Kg/cm^2)
Not Available
Not Available
Not Available
Not Available
Not Available
Exhaust system
Max.allowable back pressure
Minimum Exhaust pipe size
Exhaust manifold type
Dry Pulsetuned
Dry Pulsetuned
Dry Pulsetuned
Dry Pulsetuned
Dry Pulsetuned
Type of Silencer
Page 13
kg Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt.
mm Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt.
mm Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt.
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt.
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt.
mm Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt.
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt.
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt.
28.1 32.1 32.8 36.4 48.0 45.6 53.7
26.5 30.5 31.6 33.4 44.7 43.6 50.5
21.9 24.7 26.3 26.5 35.5 35.6 40.7
17.0 18.2 19.5 19.3 25.4 28.9 31.3
12.7 12.9 13.4 13.1 16.0 20.7 21.6
Deg C 628 579 586 629 546 563 513
Deg C 591 561 569 598 523 543 502
Deg C 496 497 511 525 474 483 468
Weight of silencer - Kg
Overall length of silencer - mm
Outer diameter of silencer - mm
Max. silencer (new) restriction
kPa (mm Hg)
Quantity of silencers per engine
Outer diameter of silencer - mm
Max. silencer (new) restriction
kPa (mm Hg)
Quantity of silencers per engine
Exhaust gas flow : Stand by load
m3/min
Exhaust gas flow : 100 % load
m3/min
Exhaust gas flow : 75 % load
m3/min
Exhaust gas flow : 50 % load
m3/min
Exhaust gas flow : 25 % load
m3/min
Exhaust gas stack temperature : Stand by load
Exhaust gas stack temperature : 100 % load
Exhaust gas stack temperature : 75 % load
Page 14
Deg C 386 415 429 429 420 403 421
Deg C 267 300 312 298 322 295 329
KW 122 137 144 155 190 197 217
Electronic
A1 A1 A1 A1 A1 A1 Class A1 Class
% < 0.8 < 0.8 < 0.8 < 0.8 < 0.8 + / - 0.25 + / - 0.25
% 5 5 5 5 5 0-6 0-6
< 10 % < 10 % < 10 % < 10 % < 10 % A1 Class A1 Class
cycles / sec < 0.8 % < 0.8 % < 0.8 % < 0.8 % < 0.8 % 1 / 75 1 / 75
3815418 3815418 3815418 3817018 3816059 4072955
4084666
3814719 3814719 3814719 3815967 3815960 4071554 4055088
Exhaust gas stack temperature : 50 % load
Exhaust gas stack temperature : 25 % load
Heat rejecton to exhaust
Governing System
Type of governor
All Speed Mech
All Speed Mech
All Speed Mech
All Speed Mech
Cummins PTG (auto)
Cummins PTG (auto)
Class of Governor
Steady State Speed Band of regulation
Droop (resolution 0.5%)
Temporary and permanent variation
Cyclic variation (see Steady State Speed Band)
Installation Data
Installation Drawing No. (Radiator Cooled)
4072665/ 4084439
Installation Drawing No. (H.E. Cooled)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Available
Base Frame Drawing No. (Radiator Cooled)
Base Frame Drawing No. (H.E. Cooled)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Available
Not Available
Page 15
g/kWm-hr 0.28 0.24 0.24 0.27 0.22 0.19 0.21
g/kWm-hr 8.00 8.68 8.58 8.10 5.19 7.55 6.67
g/kWm-hr 0.79 0.68 0.69 0.83 0.83 1.49 1.9
g/kWm-hr 0.26 0.62 0.48 0.44 0.38 0.28 0.28
1/m 0.28 0.28 0.67 0.27 0.19 0.21
gms/bhp-hr
gms/bhp-hr
BTU/lbm 18300 18300 18300 18300 18300 18300 18300
0.920 0.926 0.927 0.935 0.93 0.93 0.94
0.920 0.926 0.927 0.935 0.93 0.93 0.94
0.928 0.932 0.934 0.940 0.938 0.938 0.9462
0.8 0.8 0.8 0.8 0.8 0.8 0.8
Emissions Data (5 mode D2 cycle)
Particulate Matter (PM)
Nitrogen Oxides (NOx)
Carbon Monoxide (CO)
Hydrocarbons (HC)
Smoke Absorption Coefficient
Not Available
Specific Fuel Consumption
Specific Fuel consumption at prime rating
Specific Fuel consumption at 75% of prime rating
Assumptions/Std Values
Fuel Lower Heat Value
Alternator Eff. Standby rating
Alternator Eff. Prime rating
Alternator Eff. 75% of prime rating
Power Factor
Page 16
NTA14G3 KTA19G9 VTA28G5-I KTA38G2-I KTA38G5 KTA50G3 KTA50G8-I QSK60G3 QSK60G4
380 500 625 750 1010 1250 1500 1875 2000
380 500 625 750 1010 1250 1500 1875 2000
304 400 500 600 808 1000 1200 1500 1600
498 661 826 979 1298 1617 1854 2381 2551
450 600 750 890 1180 1470 1735 2165 2319
6 6 12 12 12 16 16 16 16
Inline Inline Vee Vee Vee Vee Vee Vee Vee
40 60 60 60 60 60 60
140 159 140 159 159 159 159 159 159
152 159 152 159 159 159 159 190 190
14.0 18.9 28.0 37.8 37.8 50.3 50.3 60.2 60.2
17.0 : 1 13.9 : 1 13.5 : 1 15.5 : 1 13.9 : 1 13.9 : 1 14.9 : 1 14.5 : 1 14.5 : 1
1931 1896 1599 1405 1862 1743 1998 2145 2298
Anti Clock Anti Clock Anti Clock Anti Clock Anti Clock Anti Clock Anti Clock Anti Clock Anti Clock
1-5-3-6-2-4 1-5-3-6-2-4
TA TA
7.60 7.95 7.60 7.95 7.95 7.95 7.95 9.50 9.50
1650 1650 1650 1650 1650 1650 1650 1650 1650
Not Applicable
Not Applicable
1L-6R-2L-5R-4L-3R-6L-1R-5L-2R-3L-4R
1R-6L-5R-2L-3R-4L-6R-1L-2R-5L-4R-3L
1R-6L-5R-2L-3R-4L-6R-1L-2R-5L-4R-3L
1R-1L-3R-3L-2R-2L-5R-4L-8R-8L-6R-6L-
7R-7L-4R-5L
1R-1L-3R-3L-2R-2L-5R-4L-8R-8L-6R-6L-
7R-7L-4R-5L
1R-1L-3R-3L-2R-2L-5R-4L-8R-8L-6R-6L-
7R-7L-4R-5L
1R-1L-3R-3L-2R-2L-5R-4L-8R-8L-6R-6L-
7R-7L-4R-5L
TA LTA 1P2L
TA LTA 1P2L
TA LTA 1P2L
TA / LTA 1P2L
TA LTA 2P2L
TA LTA 2P2L
TA LTA 2P2L
Page 17
33.6 33.6 33.6 33.6 33.6 33.6 33.6 33.6 33.6
90.9% 93.0% 94.3% 95.2% 96.3% 97.0% 97.5% 98.0% 98.1%
15568 15750 14920 13460 16640 16361 17871 17890
76450 64100 92200 79500 61700 63500 67800 92000 73000
24.4 : 1 26.3 : 1 26.5 : 1 27.6 : 1 25.7 : 1 23.8 : 1 26.2 : 1 29.2 : 1 27.9 : 1
1655 1970 2240 2000 2265 2978 2978 2780 2780
900 1092 1265 1620 1400 2080 2080 1591 1591
1313 1510 1820 2360 1658 1780 1780 1960 1960
1311 1855 2990 3723 4300 5360 5360 7185 7185
1770 2555 3354 4910 6000 6862 7205 9904 9904
1560 2427 3550 4450 5340 6402 6430 8245 8245
1356 1356 1356 6100 6100 6100 6100 10350 10350
548.5 721 856 988 980 1206 1206 1001 1001
Not Available
Page 18
152 229 356 279 279 279 279 219 219
4.99 8.4 10.8 9.75 10.4 12.7 12.7 15.77 15.77
1 0 0 0 0 0 0 0 0
SAE 14 SAE 14 SAE 14 SAE 14 SAE 14 SAE 18 SAE 18 SAE 18/21 SAE 18/21
505 584 573 584 584 584 584 692 692
105 127 116 89 89 105 105 164 164
118 142 142 142 142 142 142 168 168
527 (2129) (2498) (2863) (2863) (3975) (3975)
1250 (2224) (2572) (3119) (3119) (3914) (3914)
1420 (580) (714) (897) (1051) (1320) (1455)
-893 (640) (1096) (1378) (1614) (1294) (1427)
1347 (580) (777) (977) (1145) (1319) (1454)
-98 (640) (850) (1069) (1252) (1263) (1392)
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Compact Rad
Compact Rad
Page 19
0.77 : 1 1:1.066 0.75:1 0.90 : 1 0.5 : 1 0.6 : 1 0.7 : 1 0.59 : 1 0.59 : 1
Aluminium Plastic Steel Aluminium Plastic Aluminium Aluminium Aluminium Aluminium
1067 (42) 1067(42") 1219 (48") 1219 (48") 1651 (65") 1651 (65") 1524 (60") 1905 (75") 1905 (75")
7.1 14.7 20.7 21.2 25.5 23 36 45 45
1.58x 1.48 1.12x1.40 1.9 x 1.65 1.9 x 1.8 2.1 x 2.0 2.2 x 1.95
1.9 x 1.8 2.2 x 1.95
56 98 125 300 305 345 210 246 246
24 135 148 148
50 50 50 50 45 50 50 50 50
10 14 14 7 7 7 16 15 15
321 574 239 1243 1060 1300 1970 1970
377 700 364 960 1400 1200 1645 2364 2364
36 212 103 31 31 31 41 41
36 31 31 31 77 77
1.575 x 1.360
2.334 x 2.444
2.334 x 2.444
Not Available
1.22x1.40x0.051
Not Available
Not Available
Not Available
2.334 x 2.444
2.334 x 2.444
1798 x 1476 x 503
1600x1581x937
1971x1447x973
2360x1648x635
2345.5x2130x1328
2626x2235x1200
2516x2000x855
2480x2494x855
2480x2494x855
Not Available
Not Applicable
Not Applicable
Not Applicable
Not Applicable
10385(22015)
14322 (30364)
18290 (38780)
22655 (48000)
23855 (50546)
27375 (58000)
28400 (60176)
32285(68411)
32285(68411)
Not Available
Not Available
Not Available
Not Applicable
Not Applicable
Page 20
383 540 @ 32 C 625 @ 32 C 900 @ 32 C
148 N/A N/A Incl in above 416 @ 32 C Incl in above Incl in above Incl in above
300 531 @ 32 C 540 @ 32 C 625 @ 32 C 900 @ 32 C
1 1 1 1 1 1 1 1 1
185 405 300 300 565 565 565 920 920
191 535 400 400 740 740 740 1310 1310
50 / 3.5 50 / 3.5 50 / 3.5 50 / 3.5 50 / 3.5 50 / 3.5 50 / 3.5 50 / 3.5 50 / 3.5
PHE Shell & Tube Shell & Tube Shell & Tube Shell & Tube Shell & Tube Shell & Tube Shell & Tube Shell & Tube
--- 9.5 9.5 9.5 18.0 15.9 18.0 18 18
150 150 150 87 150 87 72 72
150 150 150 130 150 130 109 109
65 75 75 100 100 125 125 125 125
40 100 125 125 125 125
Not Available
1100 @ 32 C
1300 @ 32 C
1760 @ 32 C
1760 @ 32 C
Not Available
1516 @ 32 C
1300 @ 32 C
1760 @ 32 C
1760 @ 32 C
Not Available
Not Available
id - 75mm,13.5 drill 6-holes on 120 BC
id - 75mm,13.5 drill 6-holes on 120 BC
id - 75mm,13.5 drill 6-holes on 120 BC
id - 75mm,13.5 drill 6-holes on 120 BC
id 102mm, 13.5 drill-6
holes on 146 pcd
id 102mm, 13.5 drill-6
holes on 146 pcd
id 102mm, 13.5 drill-6
holes on 146 pcd
id 102mm, 13.5 drill-6
holes on 146 pcd
id 102mm, 13.5 drill-6
holes on 146 pcd
Not Available
Not Applicable
Not Applicable
Page 21
170 170 170 170 170 170 170 170 170
40 40 40 40 40 40 40 40 40
100 100 100 100 100 100 100 100 100
400 400 400 400 400 400 400 400 400
6.5 to 7.5 6.5 to 7.5 6.5 to 7.5 6.5 to 7.5 6.5 to 7.5 6.5 to 7.5 6.5 to 7.5 6.5 to 7.5 6.5 to 7.5
3 5 5 7.5 7.5 7.5 7.5 10 10
32 32 32 32 32 32 32 32 32
39 - 44 39 - 44 39 - 44 39 - 44 39 - 44 39 - 44 39 - 44 39 - 44 39 - 44
7 -11 7 -11 7 -11 7 -11 7 -11 7 -11 7 -11 7 -11 7 -11
35 60 60 70 100 125 150 200 200
20.8 30 80 118 124 161 165 157 157
76 160 250 300 260 440
45 125 212 230 199 310 320 550 550
129 249 301 387 442 563 744 824 885
Not Available
Not Available
Not Available
Page 22
294 546 654 1062 1062 1512 1512 1440 1440
41(6) 55(8) 55(8) 48(7) 48(7) 69(10) 67(10) 35(5) 35(5)
18.3 18.3 18.3 18.3 18.3 18.3 18.3 18.3 18.3
82 82 77 77 82 77 82 82 82
94 93 89 89 93 89 93 93 93
100 100 100 95 95 95 95 100 100
50 50 50 50 50 50 50 50 50
18.66 20 20 20 20 20 20 20 20
3.2 5 5 5 5 5 5 5 5
5 5 5 5 5 5 5 5 5
25 25 25 25 25 25 25 25 25
93 93 93 93 93 93 97 100 100
95 95 95 95 95 101.5 104 104
1 : 15 1 : 15 1 : 15 1 : 15 1 : 15 1 : 15 1 : 15 1 : 15 1 : 15
Page 23
3.7 (15) 3.7 (15) 3.7 (15) 3.7 (15) 3.7 (15) 3.7 (15) 3.7 (15) (381 mm) (381 mm)
6.22 (25) 6.22 (25) 6.22 (25) 6.22 (25) 6.22 (25) 6.22 (25) 6.22 (25) (381 mm) (381 mm)
15 15 15 15 15 15 15 15 15
68 67 98 88 48 73 62.3 47.8 52
162 193.0 175 154 172 171 226.6 233.7 250
837 1142 1554 1933 2363 2881 3374 4439 4792
23.7 32.3 44.0 54.7 66.9 81.6 95.5 125.7 135.7
1 1 2 2 2 2 2 2 2
2 2 2 2 2 2 1 1 1
15 15 15 15 15 15 15 15 15
99.7 99.7 99.7 99.7 99.7 99.7 99.7 99.7 99.7
Cummins PT Cummins PT Cummins PT Cummins PT Cummins PT
Spin-on Spin-on
10 10 10 10 10 10 10 10 10
PTG Auto PTG Auto PTG Auto PTG Auto PTG Auto PTG Auto PTG Auto Gear Gear
Medium Duty
Medium Duty
Medium Duty
Medium Duty
Medium Duty
Medium Duty
Medium Duty
Medium Duty
Medium Duty
PTG Linear Actuator
PTG Electronic
Govr
Cummins HPI PT
Cummins HPI PT
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Page 24
(4) (4) (4) (4) 102 mm 102 mm 102 mm 102 mm 102 mm
(4) (8) (8) (8) 202 mm 203 mm 202 mm 203 mm 203 mm
(6) (6.5) (6.5) (6.5) 165 mm 165 mm 102 mm 229 mm 229 mm
300 300 300 300 300 300 300 500 500
310 220 337 428 625 570
NA 126-146 126-140 128-148 160-174 110-130 125-145
1 2 2 2 2 2 2 3+4 3+4
1 2 2 2 2 2 2 4 4
300 300 300 300 300 300 300 500 500
10 (12.7) 10 (12.7) 10 (12.7) 16 (22.2) 16 (22.2) 16 (22.2) 16 (22.2) 16 (22.2) 16 (22.2)
8 (10.3) 8 (10.3) 10 (12.7) 10 (12.7) 10 (12.7) 10 (12.7) 10 (12.7) 10 (12.7) 10 (12.7)
38.6 55 95 118 145 177 177 400 400
Not Available
Not Available
Not Available
Not Available
Not Available
Page 25
28.4 33 60.5 87 87 121 148 231 231
36 43 68 114 114 151 178 261 261
45 30 30 30 30 30
45 30 35 30 30 30
45 30 35 - 30 30
35 - 45 50-70 50-90 50 50-70 50-70 50-70 59-70 59-70
15 20 20 30 20 20 20 20 20
0.18 0.18 0.36 0.18 0.18 0.18 0.18 0.18 0.18
0.10 0.13 0.32 0.19 0.25 0.31 0.37 0.46 0.49
121 121 116 121 121 121 121 121 121
Spin-on Spin-on Spin-on
2 2 3 4 4 4 4 4 4
30 30 30 30 30 30 30 30 30
Combo 1 1 2 2 2 2 2 2
5 5 5 5 5 5 5 5 5
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Paper Element
Page 26
Open Open Open Open Open Open Open Open Open
Shell & Tube Plate Shell & Tube Plate Plate Plate Plate Plate Plate
API CH 4
300 300 300 300 300 300 300 500 500
300 300 300 300 300 300 300 500 500
300 300 300 300 300 300 300 500 500
24 24 24 24 24 24 24 24 24
1 1 1 2 2 2 2 2 2
9 9 9 9 9 9 9 9 9
45 45 45 45 45 45 45 55 55
180 180 180 360 360 360 360 360 360
Lucas Lucas Lucas Lucas Lucas Lucas Lucas Prestolite Prestolite
SA23 SA23 SA23 SA23 SA23 SA23 SA23 AS123 AS123
35 35 35 35 35 35 35 35 35
2.33 / 3500 2.33 / 3500 2.33 / 3500 2.33 / 3500
Prestolite Prestolite
50MT 50MT 50MT 50MT 50MT 50MT 50MT NA NA
1 1 1 2 2 2 2 2 2
24 24 24 24 24 24 24 24 24
15 W 40 CF 4
15 W 40 CF 4
15 W 40 CF 4
15 W 40 CF 4
15 W 40 CF 4
15 W 40 CF 4
15 W 40 CF 4
15 W 40 CF 4
2.36 : 1 / 3546
2.56 : 1 / 3850
2.68 : 1 / 4020
Not Available
Not Available
Delco - Remy
Delco - Remy
Delco - Remy
Delco - Remy
Delco - Remy
Delco - Remy
Delco - Remy
Page 27
9 9 9 9 9 9 9 9 9
118 142 142 142 142 142 142 168 168
11 11 11 11 11 11 11 11 11
150 150 150 150 150 150 150 200 200
0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002
50 70 70 70 70 70 70 90 90
ST 650 ST 650
1 1 1 1 1 1 1
1023 776 776 1022 1022
0.528 0.528 0.528 0.528 0.528
620-1035 620-1035 620-1035 620 - 1035 620 - 1035
76 76 76 76 76 76 51 51 51
125 200 2 x 125 2 x 200 2 x 250 2 x 250 2 x 250 2 x 325 2 x 325
Dry Dry Dry Dry Dry Dry Dry Dry Dry
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. Residential Residential Residential Residential Residential
Not Available
Not Available
Ingersoll - Rand
Ingersoll - Rand
Ingersoll - Rand
Ingersoll - Rand
Ingersoll - Rand
Ingersoll - Rand
Ingersoll - Rand
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Not Available
Page 28
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. 168.33 168.33 168.33 500 500
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. 2210 2210 2210 2527 2527
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. 663.45 663.45 663.45 762 762
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt.
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. 2 2 2 2 2
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. 663.45 663.45 663.45 762 762
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. NA NA NA NA NA
Contact Mkt. Contact Mkt. Contact Mkt. Contact Mkt. 2 2 2 2 2
63.1 84.6 113.1 139.0 175.2 229.0 266.2 323.6 336.3
58.6 78.3 103.2 129.7 160.5 208.2 234.4 297.2 311.1
48.3 64.3 86.4 108.3 133.1 167.4 194.1 235.0 243.7
36.3 50.4 69.1 86.6 104.0 126.3 152.8 175.7 177.0
24.2 38.6 48.4 63.1 67.1 77.4 95.6 109.5 107.8
545 505 488 484 490 534 499 472 447
527 489 451 476 500 529 481 442 429
503 464 419 443 451 524 451 397 399
Not Available
Not Available
Not Available
Not Available
Not Available
Page 29
462 438 383 399 408 518 416 380 379
368 369 322 333 309 510 318 330 315
258 334 415 507 676 842 928 1087 1197
HPI PT HPI PT
A1 Class A1 Class A1 Class A1 Class A1 Class A1 Class A1 Class A1 Class A1 Class
+ / - 0.25 + / - 0.25 + / - 0.25 + / - 0.25 + / - 0.25 + / - 0.25 + / - 0.25 + / - 0.25 + / - 0.25
0-6 0-6 0-6 0 0 0 0 0-10 0-10
A1 Class A1 Class A1 Class A1 Class A1 Class A1 Class A1 Class A1 Class A1 Class
1 / 75 1 / 75 1 / 75 1 / 75 1 / 75 1 / 75 1 / 75 1 / 75 1 / 75
4104892 4072654 4072653 4055752 4105685 4105685
4912931 4072473 4072652 4072650
4084980 4104192 4104193 4055753 4105684 4105684
4084980 4104191 4104194 4056035
Cummins PTG (auto)
Cummins PTG (auto)
Cummins PTG (auto)
Cummins PTG (auto)
Cummins PTG (auto)
Cummins PTG (auto)
Cummins PTG (auto)
4912315 (SB)
4912663 (SB)
4104188 (DB)
4072659 (DB)
4072657 (DB)
4104187 (DB)
4072450(SAE00)
4072450(SAE00)
4912099 (SB)
4912662 (SB)
4072269 (DB)
4104186 (DB)
4072643 (DB)
4072269 (DB)
4072270(SAE00)
4072270(SAE00)
Page 30
0.18 0.24 0.24 0.20
8.28 7.35 7.56 7.24
0.67 1.52 1.17 0.66
0.21 0.26 0.29 0.24
0.13 0.16 0.20 0.13
18300 18300 18300 18300 18300 18300 18300 18300 18300
0.939 0.948 0.954 0.946 0.954 0.955 0.9526 0.9526 0.966
0.939 0.948 0.954 0.946 0.954 0.955 0.9626 0.966 0.966
0.945 0.953 0.9566 0.95 0.958 0.959 0.965 0.97 0.97
0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
