+ All Categories
Home > Documents > DATA SHEET Cobra EXM2 Monitor - fire-end.com

DATA SHEET Cobra EXM2 Monitor - fire-end.com

Date post: 27-Mar-2022
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
3
1-574-295-8330 www.elkhartbrass.com DATA SHEET Cobra EXM2 Monitor Model 7200X2 Efficient, high-flow, electric remote controlled water monitor (water cannon) for fire apparatus, industrial pumper, and aerial vehicles. Utilizing the new EXM2 operating platform, the 7200X2 Series features built- in Wi-Fi for simple programming and setup. The EXM2 controls, both wired and wireless, provide improved performance and operator control. The EXM2 platform continues to incorporate heavy duty swivel joints and thrust rods for unprecedented durability. Several base options are available for use with the Cobra EXM2 including a 3" flange, DN80-PN16 flange, 4" flange, 3" female NPT, and 3" female BSPT. The discharge may be ordered with either a 2.5" NHT or BSPP thread. The Cobra EXM2 comes standard with permanent magnet DC gear motors but may be upgraded to high power motors. Both motor options are sealed to NEMA 4. Mechanical Features § 1250 GPM (5000 LPM) Flow § Motors and control components sealed to NEMA 4 § Axially aligned thrust bearings for extreme durability § Absolute position sensors for precise control § Manual override control in event of power failure § Teflon impregnated, hard anodized aluminum alloy waterway § Extreme torque motors Control Features § 12 or 24VDC Compatible § Wired or wireless control options § CANBUS J1939 compatible § Programmable STOW, DEPLOY and OSCILLATION § Programmable travel limits and keep out zones § Programmable travel speeds § Integrated water valve control Cobra EXM2 Position Display 7051X2 Panel Mount Controler 7010X2 Joystick Controller 7030X2 Wireless Handheld Controller/Gateway 7015X2 Unibody Vave with E14X Actuator
Transcript

1-574-295-8330 www.elkhartbrass.com

DATA SHEET Cobra™ EXM2 MonitorModel 7200X2

Efficient, high-flow, electric remote controlled water monitor (water cannon) for fire apparatus, industrial pumper, and aerial vehicles.

Utilizing the new EXM2 operating platform, the 7200X2 Series features built-in Wi-Fi for simple programming and setup. The EXM2 controls, both wired and wireless, provide improved performance and operator control. The EXM2 platform continues to incorporate heavy duty swivel joints and thrust rods for unprecedented durability.

Several base options are available for use with the Cobra EXM2 including a 3" flange, DN80-PN16 flange, 4" flange, 3" female NPT, and 3" female BSPT. The discharge may be ordered with either a 2.5" NHT or BSPP thread. The Cobra EXM2 comes standard with permanent magnet DC gear motors but may be upgraded to high power motors. Both motor options are sealed to NEMA 4.

Mechanical Features § 1250 GPM (5000 LPM) Flow

§ Motors and control components sealed to NEMA 4

§ Axially aligned thrust bearings for extreme durability

§ Absolute position sensors for precise control

§ Manual override control in event of power failure

§ Teflon impregnated, hard anodized aluminum alloy waterway

§ Extreme torque motors

Control Features § 12 or 24VDC Compatible

§ Wired or wireless control options

§ CANBUS J1939 compatible

§ Programmable STOW, DEPLOY and OSCILLATION

§ Programmable travel limits and keep out zones

§ Programmable travel speeds

§ Integrated water valve control

Cobra™ EXM2

Position Display7051X2

Panel Mount Controler7010X2

Joystick Controller7030X2

Wireless Handheld Controller/Gateway

7015X2

Unibody Vave with E14X Actuator

1-574-295-8330 www.elkhartbrass.com

DATA SHEET Cobra EXM2 MonitorSpecificationsModel: 7200X2SD/7200X2HD

Max Flow: 1250 GPM (5000 LPM)

Max Pressure: 500 PSI (34.5 bar) Limited Duty

Inlet: 3"-150# Flg, 4"-150# Flg, 3" NPT, 3" BSPT, & DN80-PN16"

Outlet: 2.5" Male NHT & BSPP

Travel: Vertical: -45° to +120° (165°) w/ Extended Travel Horizontal: L175 to R175 (350°)

Voltage: 12 or 24 VDC compatible

Control: CANbus J1939

Communication: 915 MHz RF - FCC & IC 868 MHz RF - CE

Material/Finish: Teflon impregnated, hard anodized Elk-O-Lite®

Swing Radius: 6" (152mm) 180°, 8" (203mm) 360°

Stow Height: 16" (406mm)

Weight: 31 lbs (14 kg)

11.89" (301.9mm)

27.51" (698.74mm)

20.12" (511.01mm)

13.99" (355.33mm)

1-574-295-8330 www.elkhartbrass.com

DATA SHEET Cobra EXM2 Monitor7200X2 Cobra EXM2 Monitor Pressure Drop3.0" Inlet and 2.5" Outlet

X-Stream® Series Master Stream NozzlesThe SM1000E & SM1250E are two electrically actuated master stream nozzles for use with the Cobra EXM2 monitor. The X-Stream series nozzles automatically adjust to maintain an effective stream and maximum reach at variable or reduced flows. Electric actuators are completely sealed and allow precise pattern control from straight stream to wide fog.

Electric Nozzle SpecificationsModel Inlet Pressure PSI (BAR) Flow Range - GPM (LPM)

SM-1000E 2.5" 75 (5.2) 350-1000 (1400-4000)

SM-1250E 2.5" 75 (5.2) 350-1250 (1400-5000)

SM-1000E SM-1250E

Flow Rate (GPM)

Total Pressure Drop Friction Loss

Pres

sure

(PSI

)

60

70

50

40

30

20

10

00 200 400 600 800 1000 1200 1400 1600

07-27-20


Recommended