Art.No. 56.710.5055.6EAN 4015573906433Order unit 50 pieces

Approvals

Technical data

GeneralNominal cross section 10 mm²Colour BlueNumber of levels 1Number of clamp positions per level 3Width/grid dimension 10 mmInsulating housing PA666Inflammability class of insulation material acc. with UL94 V0Explosion-tested version "Ex e" NoMounting method DIN rail (top hat rail)/G-railTerminal blocks for electrical installations Yes

Technical dataRated current 57 ARated voltage 800 VRated impulse voltage 8 kVPollution degree 3Closing plate required YesType of insulation material ThermoplasticLength 98 mm

Connection DataConnection type 1 Tension clamp connectionConnection type 2 Tension clamp connection

Datasheet

Art.No. 56.710.5055.6

Feed-through terminal WKFN 10 D1/2/35 BLUE

Feed-through DIN rail terminal block with spring clamp connection for mounting on TS 35, nominal cross section 10 mm², width 10 mm, color blue

Page: 1 of 4

Minimum cross section solid 1.5 mm²Maximum cross section solid 10 mm²Minimum cross section fine stranded 0.2 mm²Maximum cross section fine stranded 10 mm²Minimum cross section stranded 16 mm²Maximum cross section stranded 16 mm²Wire strip length 15 mm

Technical Data UL/CSACross section UL 16-6 AWGVoltage UL 600 VCurrent factory wiring 60 ACurrent field wiring 60 ACross section CSA 16-6 AWGVoltage CSA 600 VCurrent CSA 65 A

ClassificationECLASS 8.1 27141120: Feed-through terminal blockETIM 5.0 EC000897: Feed-through terminal blockETIM 4.0 EC000897: Feed-through terminal blockETIM 3.0 EC000897: Feed-through terminal block

AccessoriesArt.No.: Type: Description04.343.6453.8 Warning cover ADF10/4 GELB Cover with warning symbol for DIN rail terminal blocks

type WKF ...07.313.1055.0 End plate APFN 10 D1/2/35 End plate for DIN rail terminal blocks APFN 10 D1/2/3507.313.1055.6 End plate APFN 10 D1/2/35 BLUE End plate for DIN rail terminal blocks APFN D1/2/35

BLUE07.313.1055.7 End plate APFN 10 D1/2/35 GREEN End plate for DIN rail terminal blocks APFN D1/2/35

GREEN07.313.1155.0 Partition TWFN 10 D1/2/35 Partition for DIN rail terminal blocks type TWFN 10

D1/2/3507.313.1155.6 Partition TWFN 10 D1/2/35 BLUE Partition for DIN rail terminal blocks type TWFN 10

D1/2/35 BLUE98.300.0000.0 Mounting rail 35x27x7,5EN60715 2000MM Mounting rail TS 35, unslotted, size 7,5 mm, length 2

m, material steel. galv. zinc-plated and dichromated98.300.1000.0 Mounting rail 35x27x7,5EN60715 2000MM Mounting rail TS 35, slotted, size 7,5 mm, length 2 m,

material steel. galv. zinc-plated and dichromated98.300.1900.0 Mounting rail 35x27x7,5EN60715 2000MM Mounting rail TS 35, slotted, size 7,5 mm, length 2 m,

material steel. galv. zinc-plated and dichromated98.360.0000.0 Mounting rail 35x24x15 EN60715 2000MM Mounting rail TS 35, unslotted, size 15 mm, length 2

m, material steel. galv. zinc-plated and dichromated98.360.0004.0 Mounting rail 35x24x15 EN60715 2000MM Mounting rail TS 35, unslotted, size 15 mm, length 2

m, material steel, hot galvanized98.370.0000.0 Mounting rail 35x27x15(EN60715)2000MM Mounting rail TS 35, unslotted, size 15 mm, length 2

m, material steel. galv. zinc-plated and dichromated98.370.1000.0 Mounting rail 35x27x15(EN60715)2000MM Mounting rail TS 35, slotted, size 15 mm, length 2 m,

material steel. galv. zinc-plated and dichromated98.380.0000.0 Mounting rail 35x24x15 EN60715 2000MM Mounting rail TS 35, unslotted, size 15 mm, length 2

m, material E copperZ5.522.7453.0 End bracket 9708 / S35 End clamp for mounting rail TS 35Z5.522.7553.0 End bracket 9208 / S15 End clamp for mounting rail TS 15Z5.522.8553.0 End bracket 9708 / 2 S 35 End clamp for mounting rail TS 35Z5.523.5653.0 End bracket WE 2 / U End clamp for mounting rail TS 35 and TS 32Z5.523.5753.0 End bracket WE 1 / U End clamp for mounting rail TS 35 and TS 32

Page: 2 of 4

Z5.523.9353.0 End bracket WEF 1 / 35 End clamp, schraubenlos for mounting rail TS 35Z5.553.2921.0 Test plug ST 2 / 2.3 RED Test plug 2,3 mm color redZ7.283.8227.0 Jumper bar IVB WKF 10- 2 Cross connector, insulated for DIN rail terminal blocks

type WKF..., 2 -pole

Page: 3 of 4

Drawings

Page: 4 of 4