+ All Categories
Home > Documents > Datasheet_Magnetic

Datasheet_Magnetic

Date post: 22-Mar-2016
Category:
Upload: z-waver
View: 213 times
Download: 0 times
Share this document with a friend
Description:
 
Popular Tags:
1
It has never been easier to integrate magnetic door locks and door strike plates in your building control, thus making it possible to monitor and control your door at any time. The access control is simply connected to the Z- wave enabler, and you wired solution has become wireless. The enabler contains a Z-wave radio and power for operating the door lock or the door strike plate. The battery lifetime is approximately 2 years. The working temperature is as low as -40 degrees Celsius, making it suitable for any office building, hotel, public building or others were you use standard magnetic door locks. The enabler can be used both for new installations and for retrofit. It is simply placed behind the existing doorframe. The enabler is controlled from the Poly-Pad, the WEB or your smartphone. But can easily be integrated with third party programs, e.g. work calendars or bookingsystems for admini- strating to who and when access is granted. Moreover it has never been easier to make the heat, lightning etc. work smoothly together with your access control. The installation is very easy and is quickly done. Z-wave is the wireless protocol used for the Poly-Lock, all data sent to the lock is off course encrypted. Demo videos are found on our homepage. Prices for wholesales and distribution are send upon request. Z-wave enabler for magnetic door lock and door strike plates Making it possible to make existing wireless Tel: +45 2084 9222 [email protected] www.poly-control.com
Transcript
Page 1: Datasheet_Magnetic

It has never been easier to integrate magnetic door locks and door strike plates in your building control, thus making it possible to monitor and control your door at any time.

The access control is simply connected to the Z- wave enabler, and you wired solution has become wireless.

The enabler contains a Z-wave radio and power for operating the door lock or the door strike plate. The battery lifetime is approximately 2 years.

The working temperature is as low as -40 degrees Celsius, making it suitable for any office building, hotel, public building or others were you use standard magnetic door locks.

The enabler can be used both for new installations and for retrofit. It is simply placed behind the existing doorframe.

The enabler is controlled from the Poly-Pad, the WEB or your smartphone. But can easily be integrated with third party programs, e.g. work calendars or bookingsystems for admini-strating to who and when access is granted.

Moreover it has never been easier to make the heat, lightning etc. work smoothly together with your access control.

The installation is very easy and is quickly done.

Z-wave is the wireless protocol used for the Poly-Lock, all data sent to the lock is off course encrypted.

Demo videos are found on our homepage. Prices for wholesales and distribution are send upon request.

Z-wave enabler for magnetic door lock and door strike plates

Making it possible to make existing wireless

Tel: +45 2084 9222 [email protected] www.poly-control.com