Date post: | 01-Jun-2018 |
Category: |
Documents |
Upload: | ashish-singh |
View: | 222 times |
Download: | 0 times |
of 65
8/9/2019 Date Sheet for Even Sem.
1/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.TECH., FIRST YEAR-II SEMESTER(Common for all branches except Biotechnology & Agriculture Engg.)
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-1(1)
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 9.30 AM to 12.30 PM NAS-203EAS-203
Engg. Mathematics-IIMathematics-II
19-05-2014 Monday GAP
20-05-2014 Tuesday 9.30 AM to 12.30 PM NME-102/ME-202EME-102/EME-202
Engg. MechanicsEngg. Mechanics
21-05-2014 Wednesday GAP
22-05-2014 Thursday 9.30 AM to 12.30 PM NEE-101/NEE-201EEE-101/EEE-201
Basic Electrical Engg.Electrical Engg.
23-05-2014 Friday GAP
24-05-2014 Saturday 9.30 AM to 12.30 PM NEC-101/NEC-201EEC-101/EEC-201 Electronics Engg.Electronics Engg.
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 9.30 AM to 11.30 AM NAS-201EAS-201 Engg. Physics-IIEngg. Physics-II
29-05-2014 Thursday GAP
30-05-2014 Friday 9.30 AM to 12.30 PM
NCS-101/NCS-201
ECS-101/ECS-201
Computer System &Programming in C
Computer Concepts &Programming in ‘C’
31-05-2014 Saturday GAP
01-06-2014 Sunday 9.30 AM to 11.30 AM NME-101/NME-201
EME-101/EME-201
Basic ManufacturingProcess
Manufacturing Process02-06-2014 Monday GAP
03-06-2014 Tuesday 9.30 AM to 12.30 PM
NAS-104/NAS-204
EAS-104/EAS-204
ProfessionalCommunication
ProfessionalCommunication
04-06-2014 Wednesday GAP
05-06-2014 Thursday 9.30 AM to 11.30 AM NAS-105/NAS-205EAS-105/EAS-205 Environment & EcologyEnvironment & Ecology
06-06-2014 Friday GAP
07-06-2014 Saturday 9.30 AM to 12.30 PM NAS-102/NAS-202EAS-102/EAS-202Engg. ChemistryEngg. Chemistry
8/9/2019 Date Sheet for Even Sem.
2/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.TECH., FIRST YEAR-II- SEMESTER
AGRICULTURAL ENGG.
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 9.30 AM to 12.30 PM NAG-204EAG-204 Surveying & LevellingSurveying & Levelling
19-05-2014 Monday GAP
20-05-2014 Tuesday 9.30 AM to 12.30 PM NAG-201EAG-201 Engg. Maths-IIEngg. Maths-II
21-05-2014 Wednesday GAP
22-05-2014 Thursday 9.30 AM to 11.30 AM EAG-205 Workshop Technology
23-05-2014 Friday GAP
24-05-2014 Saturday 9.30 AM to 12.30 PM NAG-202EAG-202 Engg. MechanicsEngg. Mechanics
25-05-2014 Sunday GAP 26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001Human Values &
Professional Ethics
28-05-2014 Wednesday 9.30 AM to 12.30 PM
NAG-203
EAG-203
Thermodynamics &Heat Engines
Thermodynamics &Heat Engines
29-05-2014 Thursday GAP
30-05-2014 Friday 9.30 AM to 11.30 AM EAG-206 Computer Science
31-05-2014 Saturday GAP
01-06-2014 Sunday 9.30 AM to 11.30 AM NME-101/NME-201Basic Manufacturing
Processes
02-06-2014 Monday GAP 03-06-2014 Tuesday GAP
04-06-2014 Wednesday 9.30 AM to 11.30 AM NAG-205Fundamentals of
ComputerProgramming
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-2 (2)
8/9/2019 Date Sheet for Even Sem.
3/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.TECH., BIOTECHNOLOGY., FIRST YEAR-II SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 9.30 AM to 12.30 PM
NAS-203EBT-201
Or NBT-201EBT-202
Engg. Mathematics-IIElementary Mathematics-II
OrRemedial BiologyRemedial Biology
19-05-2014 Monday GAP
20-05-2014 Tuesday 9.30 AM to 12.30 PM NME-102/NME202EME-102/EME-202 Engg. MechanicsEngg. Mechanics
21-05-2014 Wednesday GAP
22-05-2014 Thursday 9.30 AM to 12.30 PM NEE-101/NEE-201EBT-104/EBT-204
Basic Electrical Engg.Introduction toBiotechnology
23-05-2014 Friday GAP
24-05-2014 Saturday 9.30 AM to 12.30 PM NEC-201EBT-103/EBT-203 Electronics Engg.Basic Electrical &Electronics
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 9.30 AM to 11.30 AM NAS-201EAS-201 Engg. Physics-II Engg. Physics-II
29-05-2014 Thursday GAP
30-05-2014 Friday 9.30 AM to 12.30 PM
NCS-101/NCS-201
ECS-101/ECS-201
Computer System &Programming in ‘C’
Computer Concepts &Programming in ‘C’
31-05-2014 Saturday GAP
01-06-2014 Sunday 9.30 AM to 11.30 AM NME-101/NME-201
EME-101/EME-201
Basic ManufacturingProcess
Manufacturing Process 02-06-2014 Monday GAP
03-06-2014 Tuesday 9.30 AM to 12.30 PM
NAS-104/NAS-204
EAS-104/EAS-204
ProfessionalCommunication
ProfessionalCommunication
04-06-2014 Wednesday GAP
05-06-2014 Thursday 9.30 AM to 11.30 AM NAS-105/NAS-205EAS-105/EAS-205Environment & Ecology
Environment Ecology
06-06-2014 Friday GAP
07-06-2014 Saturday 9.30 AM to 12.30 PM NAS-102/NAS-202EAS-102/EAS-202Engg. Chemistry Engg. Chemistry
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-3(3)
8/9/2019 Date Sheet for Even Sem.
4/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. Arch., B. Arch. (Interior Design)., B.Arch. (Building Engg. & Construction Management)
B. ARCH., FIRST YEAR-II SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 9.30 AM to 12.30 PM
NAR-202
AR-202
Construction &Materials-II
Construction &Materials-II
19-05-2014 Monday GAP20-05-2014 Tuesday GAP21-05-2014 Wednesday GAP
22-05-2014 Thursday 9.30 AM to 12.30 PM
NAR-204
AR-204
ArchitecturalDrawing-II
ArchitecturalDrawing-II
23-05-2014 Friday GAP
24-05-2014 Saturday 9.30 AM to 12.30 PM
AR-203
NAR-203
ArchitecturalStructures-IIArchitecturalStructures-II
25-05-2014 Sunday GAP 26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 9.30 AM to 12.30 PM NAR-209Ecology &
Environment
29-05-2014 Thursday GAP
30-05-2014 Friday 9.30 AM to 3.30 PM NAR-201
AR-201Architectural Design-IIArchitectural Design-II
31-05-2014 Saturday GAP
01-06-2014 Sunday 9.30 AM to 12.30 PM NAR-206 Architectural Services-I
02-06-2014 Monday GAP
03-06-2014 Tuesday 9.30 AM to 12.30 PM NAR-207 History of Architecture
-I04-06-2014 Wednesday GAP
05-06-2014 Thursday 9.30 AM to 12.30 PM NAR-205AR-205Arts & Graphics-IIArts & Graphics-II
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0404013-4
(4)
8/9/2019 Date Sheet for Even Sem.
5/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.H.M.C.T., FIRST YEAR-II-SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 9.30 AM to 11.30 AM NBHM-204HMCT-204
Hotel House Keeping-IIHotel House Keeping-II
19-05-2014 Monday GAP
20-05-2014 Tuesday 9.30 AM to 11.30 AM
NBHM-202
HMCT-202
Food & BeveragesServices-II
Food & BeveragesServices-II
21-05-2014 Wednesday GAP
22-05-2014 Thursday 9.30 AM to 11.30 AM NBHM-205HMCT-205
Computer ApplicationsComputer Applications
23-05-2014 Friday GAP
24-05-2014 Saturday 9.30 AM to 11.30 AM
NBHM-201
HMCT-201
Food Production &Patisserie-II
Food Production &Patisserie-II
25-05-2014 Sunday GAP
26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 9.30 AM to 11.30 AM
NBHM-203
HMCT-203
Front OfficeOperations-IIFront OfficeOperations-II
29-05-2014 Thursday GAP
30-05-2014 Friday 9.30 AM to 12.30 PM NBHM-206HMCT-206
Nutrition Nutrition
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-5
(5)
8/9/2019 Date Sheet for Even Sem.
6/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. PHARM., FIRST YEAR-II-SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 9.30 AM to 12.30 PM
BOP-121
PHARM-122/PHAR-122
Pharmaceutical Chemistry-II(Organic Chemistry)
Pharmaceutical Chemistry-II(Organic Chemistry-I)
19-05-2014 Monday GAP
20-05-2014 Tuesday 9.30 AM to 12.30 PM
BOP-125
PHARM-125
PHAR-125
PharmaceuticalMathematics &
BiostatisticsPharmaceutical
BiostatisticsAdvance Mathematics
21-05-2014 Wednesday GAP
22-05-2014 Thursday 9.30 AM to 12.30 PM
BOP-123
PHARM-123/PHAR-123
Anatomy, Physiology &Pathophysiology-II
Anatomy, Physiology &Pathophysiology-II
23-05-2014 Friday GAP
24-05-2014 Saturday 9.30 AM to 12.30 PM
PHARM-124
PHAR-124
Computer Fundamentals &Programming
Computer Fundamentals &
Programming25-05-2014 Sunday GAP 26-05-2014 Monday GAP
27-05-2013 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &
Professional Ethics
28-05-2014 Wednesday 9.30 AM to 12.30 PM
BOP-122
PHARM-121/PHAR-121
PharmaceuticalChemistry-III(Phy. Chem.)
Physical Chemistry
29-05-2014 Thursday GAP
30-05-2014 Friday 9.30 AM to 12.30 PM BOP-124 Pharmacognosy-I
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0404013-6
(6)
8/9/2019 Date Sheet for Even Sem.
7/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
M.B.A., FIRST YEAR-II-SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 9.30 AM to 12.30 PM NMBA-024MBA-027 Financial ManagementFinancial Management19-05-2014 Monday GAP
20-05-2014 Tuesday 9.30 AM to 12.30 PM NMBA-022MBA-022
Business LawsBusiness Laws
21-05-2014 Wednesday GAP
22-05-2014 Thursday 9.30 AM to 12.30 PM NMBA-025
MBA-024 Operation Research Operations Research
23-05-2014 Friday GAP
24-05-2014 Saturday 9.30 AM to 12.30 PM MBA-021 Business Environment
25-05-2014 Sunday GAP 26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 9.30 AM to 12.30 PM NMBA-028MBA-023Research MethodologyResearch Methodology
29-05-2014 Thursday GAP
30-05-2014 Friday 9.30 AM to 12.30 PM NMBA-028
MBA-028
Managing HumanResources Managing Human
Resources 31-05-2014 Saturday GAP
01-06-2014 Sunday 9.30 AM to 12.30 PM
NMBA-023
MBA-025
Customer RelationshipManagement
Production & OperationsManagement
02-06-2014 Monday GAP
03-06-2014 Tuesday 9.30 AM to 12.30 PM
NMBA-026
MBA-026
Cost & Management
AccountingCost & Management
Accounting04-06-2014 Wednesday GAP
05-06-2014 Thursday 9.30 AM to 12.30 PM NMBA-027 Operations Management
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0404013-7
(7)
8/9/2019 Date Sheet for Even Sem.
8/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
M.C.A., FIRST YEAR-II-SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 9.30 AM to 12.30 PM NMCA-215
MCA-215Computer Organization Computer Organization
19-05-2014 Monday GAP
20-05-2014 Tuesday 9.30 AM to 12.30 PM
NMCA-212
MCA-212
Computer Based Numerical& Statistical Techniques
Computer Based Numerical& Statistical Techniques
21-05-2014 Wednesday GAP
22-05-2014 Thursday 9.30 AM to 12.30 PM NMCA-214
MCA-214
Introduction to AutomataTheory and Languages
Principles of Management
23-05-2014 Friday GAP
24-05-2014 Saturday 9.30 AM to 12.30 PM MCA-211 Environmental Science &Ethics
25-05-2014 Sunday GAP
26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &
Professional Ethics
28-05-2014 Wednesday 9.30 AM to 12.30 PM MCA-213 Data Structures using-C
29-05-2014to
04-06-2014
Thursdayto
Wednesday GAP
05-06-2014 Thursday 9.30 AM to 11.30 AM EAS-105/EAS-205 Environment and Ecology
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-8(8)
8/9/2019 Date Sheet for Even Sem.
9/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
BACHELOR OF FASHION & APPAREL DESIGN (BFAD)
SECOND SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 9.30 AM to 12.30 PM BFAD-202 Computer Application-II
19-05-2014 Monday GAP
20-05-2014 Tuesday 9.30 AM to 12.30 PMBFAD-201 Fibre to Fabric-II
21-05-2014 Wednesday GAP
22-05-2014 Thursday 9.30 AM to 12.30 PM BFAD-203 Elements of Color &Design Theory
23-05-2014 Friday GAP
24-05-2014 Saturday GAP
25-05-2014 Sunday GAP
26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-9
(9)
8/9/2019 Date Sheet for Even Sem.
10/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
Master of Applied Management (MAM)
SECOND SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 9.30 AM to 12.30 PM MAM-201 Managerial andCommunication Skills-I
19-05-2014 Monday GAP
20-05-2014 Tuesday 9.30 AM to 12.30 PM MAM-202 Elements of Economics& Management
21-05-2014 Wednesday GAP
22-05-2014 Thursday 9.30 AM to 12.30 PM MAM-203 Business Statistics
23-05-2014 Friday GAP
24-05-2014 Saturday 9.30 AM to 12.30 PM MAM-204 Financial Accounting
25-05-2014 Sunday GAP
26-05-2014 Monday GAP
27-05-2014 Tuesday GAP
28-05-2014 Wednesday 9.30 AM to 11.30 AM MAM-205 EnvironmentManagement
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-10
(10)
8/9/2019 Date Sheet for Even Sem.
11/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Agriculture Engg.), SECOND YEAR-IV-SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 9.30 AM to 12.30 PM EAG-403 Farm Power
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 11.30 AM EHU-402/EHU-401 Industrial Sociology/Industrial Psychology
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PM EAG-404 Heat & Mass Transfer
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 12.30 PM EAG-401 Electrical Circuits &Machines
24-05-2014 Saturday GAP
25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 11.30 AM EAG-405 Strength of Material
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &
Professional Ethics
28-05-2014 Wednesday GAP
29-05-2014 Thursday 9.30 AM to 12.30 PM EAG-402 Soil Mechanics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-11(11)
8/9/2019 Date Sheet for Even Sem.
12/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Bio Technology.), SECOND YEAR-IV-SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 9.30 AM to 12.30 PM EBT-403 Genetics & Molecular Biology
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 11.30 AM EHU-402/EHU-401
Industrial Sociology/ IndustrialPsychology
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PM EBT-401 Enzyme Engg.
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 12.30 PM
EOE-041
EOE-042EOE-043EOE-044EOE-045EOE-046EOE-047EOE-048
SCIENCE BASED OPEN ELECTIVESIntroduction to Soft Computing (Neural
Networks, Fuzzy Logic and GeneticAlgorithm) Nano SciencesLaser Systems and ApplicationsSpace SciencePolymer Science & Technology
Nuclear ScienceMaterial ScienceDiscrete Mathematics
EAS-402 Statistical Techniques24-05-2014 Saturday GAP 25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 12.30 PM EBT-402 Immunology
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values & ProfessionalEthics
28-05-2014 Wednesday GAP
29-05-2014 Thursday 9.30 AM to 12.30 PM EBT-404 Bioinformatics-I
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-12 (12)
8/9/2019 Date Sheet for Even Sem.
13/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Carpet & Textile Tech.), SECOND YEAR-IV-SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 9.30 AM to 12.30 PM ECT-401 Yarn Manufacture-I
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 11.30 AM EHU-402/EHU-401 Industrial Sociology/Industrial Psychology
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PM ECT-402 Fabric Manufacture-II
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 12.30 PM
EOE-041
EOE-042EOE-043EOE-044EOE-045EOE-046EOE-047EOE-048
SCIENCE BASED OPEN ELECTIVESIntroduction to Soft Computing (Neural
Networks, Fuzzy Logic and GeneticAlgorithm) Nano SciencesLaser Systems and ApplicationsSpace SciencePolymer Science & Technology
Nuclear ScienceMaterial ScienceDiscrete Mathematics
EAS-401 Mathematics-III
24-05-2014 Saturday GAP 25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 12.30 PM ECT-403 Textile Testing
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday GAP
29-05-2014 Thursday 9.30 AM to 12.30 PM ECT-404 Textile Chemistry-I
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-13
(13)
8/9/2019 Date Sheet for Even Sem.
14/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.) - 2013-2014
B. TECH. (Chemical & Related Branches.), SECOND YEAR-IV-SEMESTER
(Chemical Engg., Food Technology)
Date Day Timing Paper Code Subject
1 2 3 45
17-05-2014 Saturday9.30 AM to 11.30 AM ECH-404 Chemical Technology-I
9.30 AM to 12.30 PM EFT-401 Basic Food Microbiology
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 11.30 AM EHU-402/EHU-401 Industrial Sociology/Industrial Psychology
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PM ECH-402 Heat Transfer
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 12.30 PM
EOE-041
EOE-042EOE-043EOE-044EOE-045EOE-046EOE-047EOE-048
SCIENCE BASED OPEN ELECTIVESIntroduction to Soft Computing (Neural
Networks, Fuzzy Logic and GeneticAlgorithm) Nano SciencesLaser Systems and ApplicationsSpace SciencePolymer Science & Technology
Nuclear ScienceMaterial ScienceDiscrete Mathematics
EAS-401 Mathematics-III24-05-2014 Saturday GAP 25-05-2014 Sunday GAP
26-05-2014 Monday9.30 AM to 12.30 PM ECH-403 Chemical Reaction Engg.-I
9.30 AM to 11.30 AM EFT-402 Food Additives
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values & Professional Ethics
28-05-2014 Wednesday GAP
29-05-2014 Thursday 9.30 AM to 12.30 PM ECH-401/EPL-012
Chemical Engg. Thermodynamics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-14(14)
8/9/2019 Date Sheet for Even Sem.
15/65
8/9/2019 Date Sheet for Even Sem.
16/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Computer Sc. & Related Branches.), SECOND YEAR-IV-SEMESTER
(Computer Sc. & Engg., Computer Sc., Computer Engg. & Information Technology, Information Technology
Computer Engg., Information Science.)
Date Day Timing Paper Code Subject1 2 3 4 5
17-05-2014 Saturday 9.30 AM to 12.30 PMEEC-406
EIT-402
Introduction to Microprocesso
Software Engg.
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 11.30 AM EHU-402/EHU-401Industrial Sociology /Industrial Psychology
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PM
ECS-403
EIT-401
Theory of Automata &
Formal Language Web Technology
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 12.30 PM
EOE-041
EOE-042EOE-043EOE-044EOE-045EOE-046EOE-047EOE-048
SCIENCE BASED OPEN ELECTIVESIntroduction to Soft Computing (Neural
Networks, Fuzzy Logic and GeneticAlgorithm) Nano SciencesLaser Systems and ApplicationsSpace SciencePolymer Science & Technology
Nuclear ScienceMaterial ScienceDiscrete Mathematics
EAS-401 Mathematics-III24-05-2014 Saturday GAP 25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 12.30 PM ECS-401 Computer Organization
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values & ProfessionalEthics
28-05-2014 Wednesday GAP
29-05-2014 Thursday 9.30 AM to 12.30 PM ECS-402 Data Base ManagementSystem
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-16 (16)
8/9/2019 Date Sheet for Even Sem.
17/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Electrical & Related Branches.), SECOND YEAR-IV-SEMESTER
(Electrical Engg., Electrical & Electronics)
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 9.30 AM to 11.30 AM EEE-403 Electrical & ElectronicsEngg. Materials
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 11.30 AM EHU-402/EHU-401 Industrial Sociology/Industrial Psychology
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PM EEE-401 Electromechanical EnergyConversion-I
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 12.30 PM
EOE-041
EOE-042EOE-043EOE-044EOE-045EOE-046EOE-047EOE-048
SCIENCE BASED OPEN ELECTIVESIntroduction to Soft Computing (Neural
Networks, Fuzzy Logic and GeneticAlgorithm) Nano SciencesLaser Systems and ApplicationsSpace SciencePolymer Science & Technology
Nuclear ScienceMaterial ScienceDiscrete Mathematics
EAS-401 Mathematics-III24-05-2014 Saturday GAP 25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 12.30 PM EEE-404 Microprocessors
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday GAP
29-05-2014 Thursday 9.30 AM to 12.30 PM EEE-402 Network Analysis &Synthesis
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-17
(17)
8/9/2019 Date Sheet for Even Sem.
18/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Electronics & Related Branches.), SECOND YEAR-IV-SEMESTER(Electronics, Electronics & Communication, Electronics & Telecommunication,
Electronics & Inst., Electronics Inst. & Control, Applied Electronics & Inst.,Instrumentation & Control, Instrumentation)
(Also for B. Tech., Biomedical Engg. for Session-2009-10 &Onward)
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 9.30 AM to 12.30 PM
EBM-401
EEC-402
EIC-401
Human Anatomy &Physiology
Computer Architecture& Organization
Transducer & Sensors
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 11.30 AM EHU-402/EHU-401 Industrial Sociology/Industrial Psychology
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PM EEC-403Electronics
Instrumentation &Measurements
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 12.30 PM
EOE-041
EOE-042EOE-043EOE-044EOE-045EOE-046EOE-047EOE-048
SCIENCE BASED OPEN ELECTIVESIntroduction to Soft Computing (Neural
Networks, Fuzzy Logic and GeneticAlgorithm) Nano SciencesLaser Systems and ApplicationsSpace SciencePolymer Science & Technology
Nuclear ScienceMaterial ScienceDiscrete Mathematics
EAS-401 Mathematics-III24-05-2014 Saturday GAP 25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 12.30 PM EEC-401 Electronic Circuits
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &
Professional Ethics
28-05-2014 Wednesday GAP
29-05-2014 Thursday 9.30 AM to 12.30 PM EEC-404 Signals & Systems
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-18 (18)
8/9/2019 Date Sheet for Even Sem.
19/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Mech. Engg. & Related Branches.), SECOND YEAR-IV-SEMESTER
(Mechanical Engineering, Production Engg. Industrial & Production Engg., Mechanical & Industrial Engg.
Manufacturing Technology, Marine Engg., Aeronautical Engg., Automobile Engg., Plastic Engg.)
Date Day Timing Paper Code Subject1 2 3 4 5
17-05-2014 Saturday 9.30 AM to 11.30 AM EME-403 Measurement and Metrology
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 11.30 AM EHU-402/EHU-401 Industrial Sociology/Industrial Psychology
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PMEEE-409
EPL-401
Electrical Machines &Automatic Control
Principles of Polymerization
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 12.30 PM
EOE-041
EOE-042EOE-043EOE-044EOE-045EOE-046EOE-047
EOE-048
SCIENCE BASED OPEN ELECTIVESIntroduction to Soft Computing (Neural
Networks, Fuzzy Logic and GeneticAlgorithm) Nano SciencesLaser Systems and ApplicationsSpace SciencePolymer Science & Technology
Nuclear ScienceMaterial Science
Discrete MathematicsEAS-401 Mathematics-III24-05-2014 Saturday GAP 25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 12.30 PMEME-401
ECY-401
Applied Thermodynamics
Industrial Chemistry
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday GAP
29-05-2014 Thursday 9.30 AM to 12.30 PM
EME-402
EME-405
Manufacturing Science-I
Manufacturing Technology
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-19 (19)
8/9/2019 Date Sheet for Even Sem.
20/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Textile Group), SECOND YEAR-IV. SEMESTER
(Textile Chemistry, Textile Engg, Textile Technology & MMFT)
Date Day Timing Paper Code Subject1 2 3 4 5
17-05-2014 Saturday 9.30 AM to 12.30 PMETEF-404
EC-403
Colour & Design
Technology of Dyeing-I
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 11.30 AM EHU-402/EHU-401 Industrial Sociology/Industrial Psychology
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PMETEF-403
EC-404
Wet Processing of Textile-II
Physical Chemistry of Dyeing
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 12.30 PM
EOE-041
EOE-042EOE-043EOE-044EOE-045EOE-046EOE-047EOE-048
SCIENCE BASED OPEN ELECTIVESIntroduction to Soft Computing (Neural
Networks, Fuzzy Logic and GeneticAlgorithm) Nano SciencesLaser Systems and ApplicationsSpace SciencePolymer Science & Technology
Nuclear ScienceMaterial ScienceDiscrete Mathematics
EAS-401 Mathematics-III24-05-2014 Saturday GAP 25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 12.30 PM
ETE-401EC-402
EF-402
Yarn Manufacture-IITechnology of Bleaching &
MercerizationPrinciple of Chemical Engg.
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday GAP
29-05-2014 Thursday 9.30 AM to 12.30 PM
ETE-402
EC-401
EF-401
Fabric Manufacture-II
Principles of Fabric
Yarn Technology
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-20 (20)
8/9/2019 Date Sheet for Even Sem.
21/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEMESTER) 2013-2014
Bachelor of Hotel Management & Catering Technology (BHMCT)- IV SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 9.30 AM to 11.30 AM NBHM-403 Front Office Operations
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 11.30 AM NBHM-404 Hotel House Keeping-IV
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PM NBHM-406 Hotel Laws
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 11.30 AM NBHM-402 Food & Beverage Services-IV
24-05-2014 Saturday GAP 25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 11.30 AM NBHM-401 Bakery & Confectionery
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values & ProfessionalEthics
28-05-2014 Wednesday GAP
29-05-2014 Thursday 9.30 AM to 12.30 PM NBHM-405 Hotel Engineering
Controller of ExaminationNB : In the case of change in syllabus for any subject student should demand the appropriate Question Paper.
D-0904014-21
(21)
8/9/2019 Date Sheet for Even Sem.
22/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. Arch., B. Arch. (Interior Design)., B.Arch. (Building Engg. & Construction Management)B.ARCH.,SECOND YEAR-IV- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 45
17-05-2014 Saturday 9.30 AM to 12.30 PM AR-403 Architectural Structures-IV
18-05-2014 Sunday GAP
19-05-2014&
20-05-2014
Monday&
Tuesday9.30 AM to 3.30 PM AR-401
Architectural Design-IV(6 Hours each day, Totalduration of paper is 12
hours)
21-05-2014 Wednesday GAP
22-05-2014 Thursday GAP23-05-2014 Friday GAP24-05-2014 Saturday GAP 25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 12.30 PM AR-405 Climatology
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday
29-05-2014 Thursday 9.30 AM to 12.30 PM AR-406 Building Services (WaterSupply)
30-05-2014 Friday GAP
31-05-2014 Saturday 9.30 AM to 12.30 PM AR-402 Construction & Materials-IV
01-06-2014 Sunday GAP
02-06-2014 Monday 9.30 AM to 12.30 PM AR-404 History of Architecture-II
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-22
(22)
8/9/2019 Date Sheet for Even Sem.
23/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. PHARM., SECOND YEAR-IV-SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 9.30 AM to 12.30 PMPHARM-244
PHAR-244
Pharmaceutical Analysis-II
Pharmaceutical Analysis-II
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 12.30 PM
PHARM-241/
PHAR-241
Pharmaceutics-II(Unit Operation-II)
Pharmaceutics-IV (UnitOperation-II Including Engg.
Drawing)20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PM PHARM-243/PHAR-243
Pharmacognosy-II
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 12.30 PM
PHARM-245
PHAR-245
Anatomy, Physiology andPathophysiology-IV
Anatomy, Physiology and
Pathophysiology-IV24-05-2014 Saturday GAP
25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 12.30 PMPHARM-242/
PHAR-242Pharmaceutical Microbiology
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001Human Values &
Professional Ethics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-23(23)
8/9/2019 Date Sheet for Even Sem.
24/65
GAUTAM BUDDH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
M.B.A., SECOND YEAR-IV-SEMESTER
Date Day Timing Paper Code Subject1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PM MBA-042 Corporate Governance, Values &Ethics
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM MBA-041 Entrepreneurship Development
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM MBA-IB-03 Export Management &Documentation
22-05-2014 Thursday 2.30 PM to 5.30 PM MBA-MK-03 Sales & Distribution Management
23-05-2014 Friday 2.30 PM to 5.30 PM MBA-MK-04 Retail Management
24-05-2014 Saturday GAP 25-05-2014 Sunday GAP
26-05-2014 Monday 2.30 PM to 5.30 PM MBA-FM-03 Management of Financial Institutions& Services
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values & Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM MBA-FM-04 Tax Planning & Financial Reporting
29-05-2014 Thursday 2.30 PM to 5.30 PM MBA-IT-03 Data Communication & Network
30-05-2014 Friday 2.30 PM to 5.30 PM MBA-IT-04 Electronic Commerce
31-05-2014 Saturday 2.30 PM to 5.30 PM MBA-HR-03 Team Building & Leadership
01-06-2014 Sunday 2.30 PM to 5.30 PM MBA-HR-04 Negotiation & Counseling
02-06-2014 Monday 2.30 PM to 5.30 PM MBA-IB-04 International Logistics Management
03-06-2014 Tuesday 2.30 PM to 5.30 PMMBA-OP-01MBA-OP-02MBA-OP-03MBA-OP-04
OPEN SPECIALIZATIONInsurance & Risk Management
Hospitality ManagementProject ManagementRural Management
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-24
(24)
8/9/2019 Date Sheet for Even Sem.
25/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
M.C.A., SECOND YEAR-IV-SEMESTER
Date Day Timing Paper Code Subject1 2 3 4 5
17-05-2014 Saturday9.30 AM to 12.30 PM MCA-411 Management Information System
18-05-2014 Sunday GAP
19-05-2014 Monday 9.30 AM to 12.30 PM
MCAE-11 Compiler Design
MCAE-12 Client Server Computing
MCAE-13 Data Warehousing & Mining
MCAE-14
MCAE-15
MCAE-16
Cryptography & NetworkSecurity
Theory of Automatic & FormalLanguages
Distributed System20-05-2014 Tuesday GAP
21-05-2014 Wednesday 9.30 AM to 12.30 PM MCA-414 Computer Network
22-05-2014 Thursday GAP
23-05-2014 Friday 9.30 AM to 12.30 PM MCA-413 Fundamentals of E-Commerce
24-05-2014 Saturday GAP
25-05-2014 Sunday GAP
26-05-2014 Monday 9.30 AM to 12.30 PM MCA-412 Object Oriented Systems
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values & Professional
Ethics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-25 (25)
8/9/2019 Date Sheet for Even Sem.
26/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Agriculture Engg.), THIRD YEAR-VI-SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 4.30 PM EAG-602 EPBM & Food Quality
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM EAG-603 Ground Water, Well &Pump Engg.
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 4.30 PM EAG-604 Soil & WaterConservation Engg.
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 5.30 PM EAG-605 Tractor System &Control
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 5.30 PM EAG-601 Dairy & Food Engg.
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-26
(26)
8/9/2019 Date Sheet for Even Sem.
27/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Bio Medical Engg.), THIRD YEAR-VI-SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM EBM-602 Microcontroller & Bio-medical Application
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM EBM-603 Bio-Medical SignalProcessing
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 4.30 PM EBM-604 Bio-Material
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 4.30 PMEBM-012
EEC-013
Bioelectricity
Advance SemiconductorDevices
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 5.30 PM EBM-601 Physiological ControlSystem& Simulation
Modeling
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-27
(27)
8/9/2019 Date Sheet for Even Sem.
28/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Bio-Technology.), THIRD YEAR- VI -SEMESTER
Date Day Timing Paper Code Subject
1 2 3 45
18-05-2014 Sunday 2.30 PM to 5.30 PM EBT-602 Food Biotechnology
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM ECH-606 Heat & Mass Transfer
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PM EBT-011EBT-012
Departmental Elective-I
Animal BiotechnologyPlant Biotechnology
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 4.30 PM EBT-021EBT-022
Departmental Elective-II
Enzyme & Protein Engg.Biophysics
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 5.30 PM EBT-601Fermentation
Biotechnology
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-28 (28)
8/9/2019 Date Sheet for Even Sem.
29/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Carpet & Textile Technology.), THIRD YEAR- VI -SEMESTER
Date Day Timing Paper Code Subject
1 2 3 45
18-05-2014 Sunday 2.30 PM to 5.30 PM ECT-608 Fabric Manufacture-III
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 4.30 PM ECT-609 Carpet Testing
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PM EACT-601
EHTT-602ETDT-603
Departmental Elective-IChemical Processing of
CarpetHome Textile-IBasic Drawing
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 5.30 PM EACT-604EHTT-605
ETDT-606
Departmental Elective-IICarpet Manufacture-IISewing & Embraidery
Technique
History of Design25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 4.30 PM ECT-607 Carpet Yarn. Manufacture-II
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-29(29)
8/9/2019 Date Sheet for Even Sem.
30/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Chemical Engg.), THIRD YEAR- VI -SEMESTER
(CHEMICAL ENGG. & FOOD TECHNOLOGY)
Date Day Timing Paper Code Subject
1 2 3 45
18-05-2014 Sunday
2.30 PM to 5.30 PM ECH-602 Process Dynamics & Control
2.30 PM to 4.30 PM ECH-607 Chemical Reaction Engg.
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 4.30 PMECH-603
EFT-601
Process Equipment Design
Food Preservations & ProcessingPrinciples
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PM
EFT-602
ECH-011ECH-012ECH-013
Fruits, Vegetables & PlantationProducts
Departmental Elective-IEnergy Resources & Utilization
Energy ManagementEnergy Efficiency & Energy
Conservation
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 4.30 PM
ECH-608
ECH-021
ECH-022ECH-023ECH-024
Introduction to Modeling &Simulation
Departmental Elective-IIOptimization Technique in
Chemical EngineeringComputational Fluid Dynamics
Statistical Design of ExperimentsProcess Flow Sheet Simulation
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values & ProfessionalEthics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday2.30 PM to 5.30 PM ECH-601 Mass Transfer Operations-II
2.30 PM to 5.30 PM ECH-609 Mass Transfer Operation
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-30 (30)
8/9/2019 Date Sheet for Even Sem.
31/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Civil Engg.), THIRD YEAR- VI -SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 4.30 PM ECE-603
Transportation Engg.-2
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM ECE-602 Environmental Engg.-2
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 4.30 PM
ECE-011
ECE-012
ECE-013
ECE-014
Departmental Elective-I
Advanced Foundation Design
Matrix Analysis of Structures
Environmental Management for
Industries
Principles of Town Planning ans
Architecture
23-05-2014 Friday GAP
24-05-2014 Saturday2.30 PM to 5.30 PM
ECE-021
ECE-022
ECE-023
ECE-024
Departmental Elective-II
Advanced Concrete Design
Earth and Earth Retaining Structures
Transportation System and Planning
Rural Water Supply and Sanitation
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values & ProfessionalEthics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Friday GAP
30-05-2014 Saturday 2.30 PM to 5.30 PM ECE-601 Design of Concrete Structure-2
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-31 (31)
8/9/2019 Date Sheet for Even Sem.
32/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Computer Sc. & Engg.), THIRD YEAR- VI -SEMESTER
Date Day Timing Paper Code Subject
1 2 3 45
18-05-2014 Sunday 2.30 PM to 5.30 PM ECS-602 Software Engg.
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM ECS-603 Compiler Design
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 4.30 PM ECS-604 Web. Technology
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 5.30 PM ECS-601 Computer Network
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 4.30 PM EIT-505 Information Security &Cyber Laws
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-32
(32)
8/9/2019 Date Sheet for Even Sem.
33/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Electrical Engg.), THIRD YEAR- VI -SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM EEE-602 Power Electronics
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM EEC-608 Communication Engg.
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PM
ECS-019
EEE-011EEN-011
EEE-012
Departmental Elective-IDatabase Management
System, Data Mining andWarehousing
Digital Control SystemFundamentals of Digital
Signal ProcessingSpecial Electrical Machines
23-05-2014 Friday GAP
24-05-2014 Saturday2.30 PM to 4.30 PM
EEE-021EEE-022
EEE-023
ECS-029
Departmental Elective-IIHigh Voltage EngineeringIntelligent Instrumentation
Conventional and CAD ofElectrical MachinesCryptography & Network
Security
25-05-2014 Sunday GAP 26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 5.30 PM EEE-601 Power System Analysis
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-33 (33)
8/9/2019 Date Sheet for Even Sem.
34/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Electrical & Electronics Engg.), THIRD YEAR- VI -SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM EEE-602 Power Electronics
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM EEC-609 Analog & DigitalCommunication
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PM
ECS-019
EEE-011EEN-011
EEE-012
Departmental Elective-IData Base Management
System, Data Mining andWarehousing
Digital Control SystemFundamental of Digital
Signal ProcessingSpecial Electrical Machines
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 4.30 PM EEC-027EEC-028EEC-029EEN-021
Departmental Elective-IIVLSI Design
Wireless CommunicationAntena & Wave Propagation
Mechatronics25-05-2014 Sunday GAP26-05-2013 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 5.30 PM EEE-601 Power System Analysis
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-34(34)
8/9/2019 Date Sheet for Even Sem.
35/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Electronics & Releted Branches.), THIRD YEAR- VI -SEMESTER
(Electronics, Electronics & Communication Engg., Electronics &
Telecommunication Engineering)
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM EEC-602 Digital SignalProcessing
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM EEC-603 Microwave Engg.
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 4.30 PM EEC-604 Introduction to ElectricDrives
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 4.30 PM
EEC-011EEC-012EEC-013
EEC-014
Departmental Elective-IAnalog Signal Processing
Data StructuresAdvance Semiconductor
DevicesMicro Controller &Embedded System
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 5.30 PM EEC-601 Digital Communication
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-35
(35)
8/9/2019 Date Sheet for Even Sem.
36/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Information Tech.), THIRD YEAR-VI-SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM EIT-601 Software ProjectManagement
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 4.30 PM EIT-602 ERP
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 4.30 PM ECS-505 Graph Theory
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 5.30 PM ECS-601 Computer Network
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001Human Values &
Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 5.30 PM EIT-061EIT-062EIT-063
Departmental Elective-ISoftware Quality EnggSoftware Testing
Software Reliability
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-36
(36)
8/9/2019 Date Sheet for Even Sem.
37/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Instrumentation & Control Group), THIRD YEAR-VI-SEMESTER
(Instrumentation & Control Engg., Applied Electronics & Instrumentation, Electronics
& Instrumentation, Electronics Instrumentation & Control, Instrumentation Engg.)
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM EEC-602Digital Signal
Processing
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM EEC-607 Communication Engg.
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PM EIC-601 Microcontroller
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 4.30 PM EIC-011
EEC-012EIC-012EIC-013
Departmental Elective-IOpto Electronics
Data StructuresIntelligent Instrumentation
Microwave Engg. &Measurement
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 4.30 PM EIC-602 Electrical Machines
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-37(37)
8/9/2019 Date Sheet for Even Sem.
38/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Mechanical Engg. & Related Branches.), THIRD YEAR-VI-SEMESTER
(Mech. Engg., Production Engg., Industrial & Production Engg., Mechanical & Industrial Engg.,
Manufacturing Technology, Marine Engg. Aeronautical Engg., Automobile Engg., Plastic Engg.,)
Date Day Timing Paper Code Subject1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 4.30 PM
EME-603 Theory of Machines-II
EAU-602
EPL-602
Automotive Fuels & Lubricants
Plastics Processing-II
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 4.30 PM
EMT-602
EAE-601
EAU-603
EPL-603
Production Plaming & Control
Aircraft Instruments
Design of Automotive Components
Additives & Compounding
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PM
EME-011
EME-012
EAU-011
EME-013
EAU-013
EME-014
EAE-011
EPL-011
epartmental Elective-I
Fluid Machinery
Unconventional Manufacturing Processes
Automotive Chassis and Suspension
Product Development & Design
Robotics & Automation
Reliability Engineering
Propulsion-I
Plastic Packaging & Foam.
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 4.30 PM
EME-021
EME-022
EAU-022
EME-023
EAU-023
EME-024
EPL-025
EAE-021
Departmental Elective-II Non-Conventional Energy Resources&UtilizationAdvanced Welding Technology
Automotive Electrical and Autotronics
Optimization Techniques in Engineering
Product Design and Assembly Automation
Mechanical Vibrations
Fiber Technology
Aerodynamics-I25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM
AUC-001 Human Values & Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM
EHU-601 Industrial Management
29-05-2014 Thursday GAP
Continued to Page-39 D-0904014-38 (38)
8/9/2019 Date Sheet for Even Sem.
39/65
Continue from Page-38
30-05-2014 Friday 2.30 PM to 5.30 PM EME-602
EPL-601
EMT-601
Machine Design-II
Plastic Material-II
Pneumatics & Hydraulics
31-05-2014 Saturday GAP
01-06-2014 Sunday 2.30 PM to 5.30 PM EPI-601 Principles of Machine Tool Design
02-06-2014 Monday GAP
03-06-2014 Tuesday 9.30 AM to 12.30 PM
EPL-012/ ECH-401 Chemical Engg. Thermodynamics
04-06-2014 Wednesday GAP
05-06-2014 Thursday 2.30 PM to 5.30 PM EME-604 Refrigeration & Air Conditioning
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-39
(39)
8/9/2019 Date Sheet for Even Sem.
40/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. TECH. (Textile Group.), THIRD YEAR-VI-SEMESTER(Textile Chemistry, Textile Engg. Textile Technology, MMFT)
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM ETCEF-602/ EC-011/ETCEF-603
Structure & Properties of Fibre
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 4.30 PMETE-603EC-603EF-602
Yarn Manufacture-IVTechnology of Printing-I
Fabric Technology-II
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PMETE-604
EC-604/EF-012
Fabric Manufacture-IV
Technology of Finishing-I
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 5.30 PM ETEF-011/EC-602 Coating of Textiles
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM
AUC-001 Human Values & ProfessionalEthics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 5.30 PM ETCE-012/EF-604/EC-012
Post Spinning Operation
31-05-2014 Saturday GAP
01-06-2014 Sunday 2.30 PM to 4.30 PM
ETCEF-601 Textile Testing-II
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-40 (40)
8/9/2019 Date Sheet for Even Sem.
41/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. Arch., B. Arch. (Interior Design)., B.Arch. (Building Engg. & Construction Management)THIRD YEAR- VI -SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM AR-603 ArchitecturalStructures-VI
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM AR-602Construction &
Materials-VI
21-05-2014 Wednesday GAP
22-05-2014&
23-05-2014
Thursday&
Friday9.30 AM to 3.30 PM AR-601
Architectural Design-
VI (6 hours each day,Total duration of paperis 12 hours
24-05-2014to
26-05-2014
Saturdayto
MondayGAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014to
31-05-2014
Wednesdayto
SaturdayGAP
01-06-2014 Sunday 2.30 PM to 5.30 PM AR-604 Theory of Design
02-06-2014 Monday GAP
03-06-2013 Tuesday 2.30 PM to 5.30 PM AR-605 Specification &Estimation
04-06-2014 Wednesday GAP
05-06-2014 Thursday 2.30 PM to 5.30 PM AR-606 Building Services (ME)
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-41 (41)
8/9/2019 Date Sheet for Even Sem.
42/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.H.M.C.T., THIRD YEAR-VI- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM NBHM-601 Indian Heritage
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM NBHM-602 Tourism & HotelEconomics
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PM NBHM-603 Research Methodology
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 5.30 PM NBHM-604 Financial Management
25-05-2014 Sunday GAP 26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM NBHM-605EnvironmentManagement
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 5.30 PM NBHM-606 Human ResourceManagement
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-42 (42)
8/9/2019 Date Sheet for Even Sem.
43/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.PHARM., THIRD YEAR-VI- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM
PHARM-361
PHAR-361
Pharmaceutical Chem-VI(Medicinal Chemistry-II)
Pharmaceutical Chem-VI(Medicinal Chemistry-II)
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PMPHARM-364/
PHAR-364 Pharmacognosy-III
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PMPHARM-366/
PHAR-366Environment &
Ecology
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 5.30 PM PHARM-362/
PHAR-362
Pharmaceutics-VII(PharmaceuticalTechnology-II)
25-05-2014 Sunday GAP
26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM PHARM-365/PHAR-365
ProfessionalCommunication-II
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 5.30 PM PHARM-363/PHAR-363
Pharmacology-II
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-43
(43)
8/9/2019 Date Sheet for Even Sem.
44/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
BACHER OF FASHION & APPAREL DESIGN
VI - SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM BFAD-601 Production Process
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM BFAD-602 Entrepreneurship andDevelopment
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PM\
BFAD-603 Surface Ornamentation
23-05-2014 Friday GAP24-05-2014 Saturday GAP25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-44
(44)
8/9/2019 Date Sheet for Even Sem.
45/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOWSCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. Tech. (Environmental Engg.) THIRD YEAR-VI- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
18-05-2014 Sunday 2.30 PM to 5.30 PM EEV-601 Wastewater Engineering
19-05-2014 Monday GAP
20-05-2014 Tuesday 2.30 PM to 5.30 PM EEV-602 Estimation and ProjectManagement
21-05-2014 Wednesday GAP
22-05-2014 Thursday 2.30 PM to 5.30 PM EEV-603 Environmental ImpactAssessment and Audit
23-05-2014 Friday GAP
24-05-2014 Saturday 2.30 PM to 4.30 PM EEV-11
EEV-012
EEV-013
Departmental Elective-IEarth and Environment
Ecological and BiologicalPrinciples and Processes
Environmental Economics25-05-2014 Sunday GAP 26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
28-05-2014 Wednesday 2.30 PM to 5.30 PM EHU-601 Industrial Management
29-05-2014 Thursday GAP
30-05-2014 Friday 2.30 PM to 4.30 PM
EEV-21
EEV-022
EEV-023
Departmental Elective-II
Science and Policy of ClimateChangeEnvironmental Policy &
LegislationEnvironmental Economics
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-45
(45)
8/9/2019 Date Sheet for Even Sem.
46/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Agricultural Engineering.), FOURTH YEAR-VIII- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 45
17-05-2014 Saturday 2.30 PM to 5.30 PM
EOE-081
EOE-083EOE-084EOE-085
OPEN ELECTIVE-II Non-Conventional Energy
ResourcesProduct Development
Automation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM EAG-801 Drying & Storage Engg.
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM EAG-802 Agricultural Structures &Environmental Control
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PM
EAG-033
EAG-032
EAG-035
ELECTIVE-III
Micro Irrigation System &Design
Remote Sensing and GISApplication
Food PackagingTechnology
EAG-038 Tractor Design Principles
24-05-2014 Saturday GAP
25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-09-04014-46
(46)
8/9/2019 Date Sheet for Even Sem.
47/65
8/9/2019 Date Sheet for Even Sem.
48/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Bio-Technology.), FOURTH YEAR-VIII- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 45
17-05-2014 Saturday 2.30 PM to 5.30 PM
EOE-081
EOE-083EOE-084EOE-085
OPEN ELECTIVE-II Non-Conventional Energy
ResourcesProduct Development
Automation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30PM EBT-051
EBT-052
DEPARTMENTAL ELECTIVE-V
Biotechnology in Health Care
Nanobiotechnology
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM EBT-801
ELECTIVE-V
Environmental Biotechnology
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PMEBT-061
EBT-062
DEPARTMENTAL ELECTIVE-VI
Biomedical Instrumentation
Genomics & Protomics
24-05-2014 Saturday GAP25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0404013-48
(48)
8/9/2019 Date Sheet for Even Sem.
49/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Carpet & Textile Technology.), FOURTH YEAR-VIII- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PM
EOE-081
EOE-083EOE-084EOE-085
OPEN ELECTIVE-II Non-Conventional Energy
ResourcesProduct Development
Automation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM
EACT-801
EHTT-802
ETDT-803
DEPARTMENTAL ELECTIVE-VEmerging Technology
Quality Control for Home Textiles
Design Management
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM ECT-807 Advance Fabric Manufacturing
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PM
EACT-804
EHTT-805
ETDT-806
DEPARTMENTAL ELECTIVE-VI
Advances in Carpet Manufacturing
Advances in Home Textiles
Advances in Textile DesigningTechnology
24-05-2014 Saturday GAP25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2013 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &
Professional Ethics
Controller of Examination
N.B.: In the case of Change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-49 (49)
8/9/2019 Date Sheet for Even Sem.
50/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Chemical Engineering.), FOURTH YEAR-VIII- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 45
17-05-2014 Saturday 2.30 PM to 5.30 PM
EOE-081
EOE-083EOE-084EOE-085
OPEN ELECTIVE-II Non-Conventional Energy
ResourcesProduct Development
Automation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM
ECH-051
ECH-052
ECH-053
ECH-054
DEPARTMENTAL ELECTIVE-VAdvance Separation Technology
Design of Piping Systems
Fluidization Engineering
Multiphase Reactor Design
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM ECH-801 Transport Phenomena
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PM
ECH-061
ECH-062
ECH-063
DEPARTMENTAL ELECTIVE-VIFertilizer Technology
Petroleum Refining Technology
Petrochemical Technology
24-05-2014 Saturday GAP25-05-2014 Sunday GAP
26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-50(50)
8/9/2019 Date Sheet for Even Sem.
51/65
8/9/2019 Date Sheet for Even Sem.
52/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Civil Engineering., Environmental Engg.), FOURTH YEAR-VIII- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PM
EOE-081
EOE-083EOE-084EOE-085
OPEN ELECTIVE-II Non-Conventional Energy
ResourcesProduct Development
Automation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM
EEV-051
ECE-051ECE-052
ECE-053ECE-054
DEPARTMENTAL ELECTIVE-VSustainable Agriculture Building and
SanitationComputer Aided Design
Analysis and Design of HydraulicStructures
Water Resources SystemsMachine Foundation Design
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM
ECE-801
EEV-801
Construction Technology &Management
Design of Waste Water System
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PM
ECE-061 DEPARTMENTAL ELECTIVE-VIGround Improvement Techniques
ECE-062 River EngineeringECE-063 Ground Water ManagementECE-064 Earthquake Resistant Design of
Structures
EEV-061 Water Power Engineering
24-05-2014 Saturday GAP25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-52(52)
8/9/2019 Date Sheet for Even Sem.
53/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Computer Sc. & Engineering.), FOURTH YEAR-VIII- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PM
EOE-081
EOE-083EOE-084EOE-085
OPEN ELECTIVE-II Non-Conventional Energy
ResourcesProduct Development
Automation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM
ECS-081
ECS-082
ECS-083
ECS-084
CS- ELECTIVE-IIIReal Time System
Software Project Management
Embedded System
Cryptography & NetworkSecurity
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM ECS-801 Artificial Intelligence
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PM
ECS-085ECS-086
ECS-087
ECS-088
CS-ELECTIVE-IV Neural Networks
Natural Language Processing
Mobile Computing
Soft Computing24-05-2014 Saturday GAP25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-53 (53)
8/9/2019 Date Sheet for Even Sem.
54/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Electrical Engg.), FOURTH YEAR-VIII- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PM
EOE-081
EOE-083EOE-084EOE-085
OPEN ELECTIVE-II Non-Conventional EnergyResources
Product DevelopmentAutomation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM
EEE-051
EEE-052
EEE-053
EEE-054
DEPARTMENTAL ELECTIVE-VBio Instrumentation
Advanced Control System
Reliability Engineering
Energy Efficiency & Conservation
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM EEE-801 Utilization of Electrical Energy &Traction
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PM
EEE-061
EEE-062
EEE-063
DEPARTMENTAL ELECTIVE-VIPower Quality
SCADA & Energy ManagementSystem
Power Converters Applications
24-05-2014 Saturday GAP25-05-2014 Sunday GAP
26-05-2014 Monday 2.30 PM to 5.30 PM EEC-069-A/EIT-082 Multimedia System
27-05-2014 Tuesday 9.30 AM to 11.30 AM
AUC-001 Human Values & ProfessionalEthics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-54(54)
8/9/2019 Date Sheet for Even Sem.
55/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Electrical & Electronics Engg.), FOURTH YEAR-VIII- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PMEOE-081EOE-083EOE-084EOE-085
OPEN ELECTIVE-II Non-Conventional Energy ResourcesProduct Development
Automation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM
EEE-051
EEE-052
EEE-053
EEE-054
DEPARTMENTAL ELECTIVE-VBio Instrumentation
Advanced Control System
Reliability Engineering
Energy Efficiency & Conservation
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM EEC-809 Data Communication Networks
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PM
EEC-066
EEC-067
EEC-068
EEC-069-B
DEPARTMENTAL ELECTIVE-VIMicrowave & Radar
Speech Processing
Image Processing
Satellite Communication
24-05-2014 Saturday GAP25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-55(55)
8/9/2019 Date Sheet for Even Sem.
56/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Electronics & Related Branches.), FOURTH YEAR-VIII- SEMESTER
(Electronics Engg., Electronics & Communication Engg, Electronics & Telecommunication Engg.)
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PM
EOE-081
EOE-083EOE-084EOE-085
OPEN ELECTIVE-II Non-Conventional Energy
ResourcesProduct Development
Automation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM EEC-802 Electronics Switching
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM EEC-801 Wireless & MobileCommunication
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PM
EEC-031
EEC-032
EEC-033
EEC-034
EEC-035
DEPARTMENTAL ELECTIVE-IIIOptical Network
Digital System Design UsingVHDL
Speech Processing
Integrated Circuit Technology
Introduction to RADAR Systems
24-05-2014 Saturday GAP25-05-2014 Sunday GAP
26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-56
(56)
8/9/2019 Date Sheet for Even Sem.
57/65
8/9/2019 Date Sheet for Even Sem.
58/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Instrumentation & Control Group.), FOURTH YEAR-VIII- SEMESTER
(Instrumentation & Control Engg., Electronics & Instrumentation Engg. , Applied Electronics & Instrumentation
Engg.)
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PMEOE-081
EOE-083EOE-084EOE-085
OPEN ELECTIVE-II Non-Conventional Energy
ResourcesProduct Development
Automation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM EIC-802 Biomedical Instrumentation
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM EIC-801 Optimal Control Systems
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PM
EIC-031
EIC-032
EIC-033
EIC-034
EEC-032
DEPARTMENTAL ELECTIVE-IIIComputerized Process Control
Bio-medical Signal Processing
Analytical Instrumentation
Micro and Smart Systems
Digital System Design using VHDL
24-05-2014 Saturday GAP25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-58(58)
8/9/2019 Date Sheet for Even Sem.
59/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Mechanical Engg. Group.), FOURTH YEAR-VIII- SEMESTER
(Mech. Engg., Production Engg., Industrial Production Engg., Mechanical & Industrial Engg. Manufacturing
Technology, Marine Engg. Aeronautical Engg., Automobile Engg.)
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PM
EOE-081EOE-083EOE-084EOE-085
OPEN ELECTIVE-II
Non-Conventional Energy ResourcesProduct Development
Automation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM
EPL-051/EME-051
EPL-052/EME-052
EME-053
EME-054
EME-055
EME-056
EAE-051
EAU-052
EAU-053
EAE-052
EPL-055
TMM-802
DEPARTMENTAL ELECTIVE-V
Operators Research
Maintenance Engineering &
Management
Design of Thermal Systems
Advanced Synthesis of Mechanisms
Six Sigma Methods & Applications
Concepts of Modern Physics
Aerodynamics Design & Testing
Alternative Energy Sources for
Automobile
Vehicle Dynamics
Structural Designs Testing
Polymer Composites
Ship Operation & Management
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM
EME-801EPI-801EMT-801EAE-801
EAU-801
EPL-801
TMM-801
Power Plant Engg.Quality ControlAdvanced Manufacturing SystemAircraft Rules & Regulations
Trouble Shooting, Servicing &Maintenance of AutomobileIndustrial Safety and HazardManagementMarine Control Engg. & Automation
22-05-2014 Thursday GAP
Continued to Page-60
D-0904014-59 mtu
(59)
8/9/2019 Date Sheet for Even Sem.
60/65
Continue from Page-59
23-05-2014 Friday 2.30 PM to 5.30 PM
EPL-061/EME-061
EME-062
EME-063
EME-064
EME-065/EPL-065
EME-066
EAE-063
EAU-061
EAU-063
EPL-066
DEPARTMENTAL ELECTIVE-VI
Finite Element Method
Non-Destructive Testing
Advanced Materials Technology
Production & Operations Management
Energy Management
Fundamentals of Bio Medical Engineering
Rockets & Missiles
Computer Simulation of IC Engines
Hydraulic and Pneumatic Systems
Surface Coating Technology
TMM-021
ELECTIVE-II
Marine Electronics & Electrical
Technology
24-05-2014 Saturday GAP
25-05-2014 Sunday GAP
26-05-2014 Monday 2.30 PM to 5.30 PM TMM-031
ELECTIVE-III
STCW Convention, SO, ISM, Fore andMarpol
27-05-2014 Tuesday 9.30 AM to 11.30 AM
AUC-001 Human Values &Professional Ethics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-60
(60)
8/9/2019 Date Sheet for Even Sem.
61/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.Tech. (Textile Technology, Textile Chemistry. Textile Engg. Man Made Fibre Technology.)
FOURTH YEAR-VIII- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PM EOE-081EOE-083EOE-084EOE-085
OPEN ELECTIVE-II
Non-Conventional Energy ResourcesProduct Development
Automation & RoboticsIndustrial Automation-II
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM ETEF-032
DEPARTMENTAL ELECTIVE-III
Theory of Textile Structure
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM
ET-801
EC-802
EE-801
Advance Weaving Technology
Development in wet Processing
Principles & Designs of Weaving m/cs
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PM ETEF-041
EC-801
DEPARTMENTAL ELECTIVE-IV
Process Control in Spinning
Technology of Printing
24-05-2014 Saturday GAP
25-05-2014 Sunday GAP
26-05-2014 Monday 2.30 PM to 5.30 PMEF-801/EC-032/EF-802
High Performance Fibres
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values & ProfessionalEthics
Controller of Examination
N.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-61(61)
8/9/2019 Date Sheet for Even Sem.
62/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
BACHELOR OF FASHION & APPAREL DESIGN
VIII- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PM BFAD-801 Design Process
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PM BFAD-802 Historic Textiles
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM BFAD-803 Home Textiles
22-05-2014 Thursday GAP23-05-2014 Friday GAP24-05-2014 Saturday GAP25-05-2014 Sunday GAP26-05-2014 Monday GAP
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of Examination
D-0404013-62(62)
8/9/2019 Date Sheet for Even Sem.
63/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B.PHARM., FOURTH YEAR-VIII- SEMESTER
Date Day Timing Paper Code Subject
1 2 3 4 5
17-05-2014 Saturday 2.30 PM to 5.30 PM
PHARM-485(1)to
PHARM-485(7)/PHAR-485(1)
toPHAR-485(7)
ELECTIVE(1) Standardization of
Herbal Drugs(2) Drug Design(3) Clinical Pharmacy &
Drug Iteractions(4) Pharmaceutical
Marketing(5) Pharmaceutical
Packaging(6) Novel Drug Delivery
Systems(7) GMP, Quality
Assurance & Validation
18-05-2014 Sunday GAP
19-05-2014 Monday 2.30 PM to 5.30 PMPHARM-481/
PHAR481PharmaceuticalBiotechnology
20-05-2014 Tuesday GAP
21-05-2014 Wednesday 2.30 PM to 5.30 PM PHARM-482/PHAR/482 Natural Products
22-05-2014 Thursday GAP
23-05-2014 Friday 2.30 PM to 5.30 PMPHARM-483/
PHAR-483 PharmaceuticalIndustrial Management
24-05-2014 Saturday GAP25-05-2014 Sunday GAP
26-05-2014 Monday 2.30 PM to 5.30 PMPHARM-484/
PHAR-484 Hospital Pharmacy
27-05-2014 Tuesday 9.30 AM to 11.30 AM AUC-001 Human Values &Professional Ethics
Controller of ExaminationN.B.: In the case of change in syllabus for any subject, student should demand the appropriate Question Paper.
D-0904014-63
(63)
8/9/2019 Date Sheet for Even Sem.
64/65
UTTAR PRADESH TECHNICAL UNIVERSITY, LUCKNOW
SCHEDULE FOR THEORY EXAMINATION (EVEN SEM.)- 2013-2014
B. Arch., B. Arch. (Interior Design)., B. Arch. (Building Engg.