Dazzling Plus Size – Instructions PS104Dazzling Plus Size – Instructions Cont. PS104 (All seams...

Dazzling Plus Size – Instructions PS104 (All seams & serged edges are normal ¼ width)

Floor Length Gown with Sash

• Make darts in the bodice front. • Press dart open. • Make darts in bodice back sections. • Sew back sections to the bodice front at the side seams. • Prepare the bodice lining the same as above. • With right sides together, sew bodice lining to the bodice at the

upper edge and left back opening. • Clip seam, turn and press. • Finish raw edges of the right back opening with a zigzag stitch or

serger. • Baste lining and bodice together close to the lower edge. • Sew the back sections of the skirt to the front at the side seams. • Finish lower edge of the skirt with a narrow hem. • Reinforce the front “V” by stitching between the dots. Clip to the

stitching at the center front. • Gather the upper edge of the skirt. • Pull gather to fit bodice. • With right sides together pin the bodice to the skirt. Stitch in place. • Sew center seam of sash sections together. • Fold sash in half, stitch along edges, leaving an opening for turning. • Turn sash right side out and press. • Sew back seam from the hem to the dot. Press. • Gown should close with the left opening over right. • Sew snaps in place to secure.

Knee Length Dress with Long Sleeves

• Make darts in the bodice front. • Press dart open. • Make darts in the back bodice sections. • Sew back sections to the bodice front at the side seams. • Prepare the bodice lining the same as above. • With right sides together, sew bodice lining to the bodice at the

upper edge and left back opening. • Clip seam, turn and press. • Finish raw edges of the right back opening with a zigzag stitch or

serger.

Copywrite 2007©DesignsbyJude

Copyright 2008©DesignsbyJude, Tamara Casey Copyright 2008©DesignsbyJude, Tam

ara Casey Copyright 2008©DesignsbyJude, Tamara Casey





Dazzling Plus Size – Instructions Cont. PS104 (All seams & serged edges are normal ¼ width)

Knee Length Dress with Long Sleeves Continued

• Baste lining and bodice together close to the lower edge. • Finish the lower edge of each sleeve with a narrow hem. • Gather the lower edge of the upper sleeve. • With right sides together, pin lower sleeve edge to the upper sleeve. • Stitch in place. • Make casing on the upper edge of the sleeve by turning the raw

edge under 3/8”. Press, then stitch casing in place. • Run elastic through the casing. Pull to fit from the dolls arm pit over

her shoulder. Tack in place at each end. • Reinforce the front “V” of the skirt by basting between the dots. • Gather the upper edge of the skirt. • Pull up bobbin threads and adjust the gathers to fit the bodice. • With right sides together, pin the bodice to the skirt and sew in

place. • Sew back seam from the hem to the dot. Press. • Gown should close with the left opening over right. • Sew snaps in place to secure.

Short Sleeve Variation

• Fold the sleeve band in half. • Gather the lower edge of the upper sleeve. • Pin the sleeve band to the upper sleeve with right sides together. • Stitch in place. • Create a casing on the upper portion of the sleeve by folding the

raw edge over by 3/8”. • Sew casing in place to secure. • Run elastic through the casing. • Tack ends in place, fitting the opening to the dolls arm and allowing

enough stretch to rest on her shoulder. • Hand sew the casing openings closed. • Both sleeve types can be hand sewn to the dress or left unattached

for a variety of looks.

Thank you for your purchase. I hope you have fun creating a variety of

adorable outfits for your favorite Ellowyne.

E-Mail: [email protected], Ebay I.D. : DesignsbyJude (I am not affiliated with Tonner or Wilde Imagination)

Copywrite 2007©DesignsbyJude







mailto:[email protected]

























Date post:	26-Feb-2021
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Dazzling Plus Size – Instructions PS104Dazzling Plus Size – Instructions Cont. PS104 (All seams...

Documents