Date post: | 26-Mar-2015 |
Category: |
Documents |
Upload: | hunter-brooks |
View: | 214 times |
Download: | 1 times |
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
•Setting up a ‘Typical’ Project Folder
•Setting Up a Project and Using the DBI Project Templates
•How to Use the Project Navigator and Project Browser
•Commands, Profiles, Workspaces
•Overview of the Ribbons and Menus Interface
•Dynamic Blocks
•Printing and Plotting
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
•Setting up a ‘Typical’ Project Folder
H:\ACA2011\Template\Imperial\DBI Project Template_2006_30x42 Project Template
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
•Setting Up a Project and Using the DBI Project Templates
August 18, 2011
August 3, 2009
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
•Setting Up a Project and Using the DBI Project Templates
Project Navigator
Project InformationSelect upper right ‘pencil’ iconPencil icon will show the ‘Project Details’
In this location, enter in all project, consultant, building information, and project data.
All of this information links to the cover sheet and project data sheet.
DBI “How To” Series – Update to DBI Autocad 2006 Template
August 18, 2011
•How to Use the Project Navigator and Project Browser
Constructs and Elements
In order to maintain consistency, Constructs and Elements have been pre-named.
Although, you will notice the naming/abbreviation conventions have not changed, it is encouraged that you always include the floor number.
To add the floor number, right-click the construct and rename it.
DBI “How To” Series – Update to DBI Autocad 2006 Template
August 18, 2011
DBI “How To” Series – Update to DBI Autocad 2006 Template
Views
Details Folder
Typical details for doors, sills, partition types and transitions have been added.
The details are already x-ref’ed into the proper ‘sheets’
August 18, 2011
Views
Legends Folder
Legends have been populated and named
Naming conventions have been changed to coordinate with the new plan views
-Example: lcp = legend construction plan ldlp = legend demo lighting plan
DBI “How To” Series – Update to DBI Autocad 2006 Template
August 18, 2011
Views
Plans Folder
Plans have been not been populated, x-ref’s have been linked. The x-ref will change when you rename.
To ensure you have the correct plans x-ref’ed into your plan view, type x-ref and review.
Naming conventions coordinate with legends
Example: acp = architectural construction plan adlp = architectural demo lighting plan
DBI “How To” Series – Update to DBI Autocad 2006 Template
August 18, 2011
Views
Schedules Folder
Typical schedule layouts have been included in each view
The schedules have been x-ref’ed into the proper sheets
DBI “How To” Series – Update to DBI Autocad 2006 Template
August 18, 2011
Sheets Updates:
30x42 and 24x36 sheet templates have been created
36x48 sheet template will be created soon
New ‘subsets’ can be made to add a space plan, test-fit or different sheet size.
To create a new subset right click the Project name and select ‘new subset’
DBI “How To” Series – Update to DBI Autocad 2006 Template
August 18, 2011
Sheets Updates (con’t)
New sheet naming and numbering conventions have been added.
The first eight ‘General Sheets’ contain linked information as well as x-ref’ed details and schedules
The ‘Architectural Interior' sheets contain the proper x-ref’ed legends and plans
DBI “How To” Series – Update to DBI Autocad 2006 Template
August 18, 2011
DBI “How To” Series – Profiles ,Workspaces and Page Setups
•Commands
August 18, 2011
NEED IMAGE
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
•Commands, Profiles, Workspaces
The ACA2011 DBI template contains a PROFILE called “DBI”.
– To load this profile, type ‘Options’ in the Command line.
– The following dialog box will appear.
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
Select the ‘Profiles’ tab, and then ‘Import…’
•Commands, Profiles, Workspaces
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
Do NOT change the profile name --- leave it as ‘DBI’, and select ‘Apply & Close’
•Commands, Profiles, Workspaces
DBI “How To” Series – Profiles ,Workspaces and Page Setups
Select the ‘Set Current’ button on the right.
You will notice that the menus and toolbars will change.
• If there are other profiles, highlight the other profiles one at a time and select ‘Delete’.
When this is completed, the dialog box should appear as below. Select ‘OK’.
August 18, 2011
•Commands, Profiles, Workspaces
DBI “How To” Series – Profiles ,Workspaces and Page Setups
•Workspace
August 18, 2011
NEED IMAGE
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
•Overview of the Ribbons and Menus Interface
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
•Overview of the Ribbons and Menus Interface
Page Setups within AutoCAD:Right-click on your sheet layout tab and select ‘Page Setup Manager’
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
Page Setups within AutoCAD:All the PageSetups currently defined in this specific DWG will be listed.Scroll down to the bottom of the list and begin purging by selecting each page setup and ‘Delete’ (must use
the ‘Del’ key from the keyboard).
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
From the ‘Look In’ drop-down box, go to;H:\ADT2006\Templates\Imperial\ --- Change ‘Files of Type” to find only .DWT files
---select “DBI Sheet (Imperial Ctb).dwt” --- and ‘Open’
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
There are 50 PageSetups defined –
24 x 36 – Full and Half Size for both B/W and Color Plotters30 x 42 – Full and Half Size for both B/W and Color Plotters36 x 48 – Full and Half Size for both B/W and Color Plotters8-1/2 x 11 – Workroom printers – Portrait and Landscape
Bay printers – Portrait and Landscape11 x 17 – Workroom printers – Portrait and Landscape
Bay printers – Portrait and Landscape
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
To Import - Highlight the appropriate PageSetup(s) and ‘Select ‘OK’ –
September 3, 2009
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
Then, highlight the FULL size PageSetup, and Select ‘Set Current’ –
September 3, 2009
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
Check in the ‘Page Setup’ drop-down box, that your selectedpagesetup is the current (default) setup and select ‘OK’.You do not need to modify any other variable.
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
August 18, 2011
Tool Palettes/Dynamic Blocks
Design Center has been removed
Standard dynamic and typical blocks have been added
Power, lighting, furniture, equipment, annotation, mechanical, windows, doors, and walls are all in the same location.
DBI “How To” Series – Update to DBI Autocad 2006 Template
•Dynamic Blocks
August 18, 2011
DBI “How To” Series –Autocad 2011 (ACA2011) Overview
•Printing and Plotting
August 18, 2011