13
Porcelain Tiles
Porcelain Tiles
Features:
█ Vitrified Tiles with 2-3mm thickness of mirror polished top layer.
█ Design is not printed but comes from body color within the top layer after polishing.
█ MoH (Measurement of Hardness) is more than glazed vitrified tiles. Hence, durability is better than polished glazed vitrified tiles (PGVT).
█ There is no chance of visible wear and tear.
█ Perfectly crafted for high traffic areas – airports, hotels, shopping malls and apartments etc.
█ It provides natural marble look.
6 MATRIX-1
HIGHLYDURABLE
HIGH-GLOSSFINISH
2-3MM THICKTOP LAYER
6 MATRIX-2
HIGHLYDURABLE
HIGH-GLOSSFINISH
2-3MM THICKTOP LAYER
6 MATRIX-3
HIGHLYDURABLE
HIGH-GLOSSFINISH
2-3MM THICKTOP LAYER
6 MATRIX-5
HIGHLYDURABLE
HIGH-GLOSSFINISH
2-3MM THICKTOP LAYER
6 MATRIX-6
HIGHLYDURABLE
HIGH-GLOSSFINISH
2-3MM THICKTOP LAYER
6 MATRIX-7
HIGHLYDURABLE
HIGH-GLOSSFINISH
2-3MM THICKTOP LAYER
6 PULATI-1
HIGHLYDURABLE
HIGH-GLOSSFINISH
2-3MM THICKTOP LAYER
6 PULATI-2
HIGHLYDURABLE
HIGH-GLOSSFINISH
2-3MM THICKTOP LAYER
6 MATRIX-1 6 MATRIX-2
6 MATRIX-3
6 MATRIX-6
6 MATRIX-5
6 MATRIX-7
6 PULATI-1 6 PULATI-2
60cm x 60cm 60cm x 60cm
Hotline: 08000016609
STANDARD AS PER BDSISO 13006 : 2006 GROUP BIa
VALUESDECLARED BY
AKIJ CERAMICSTEST METHODCHARACTERISTICSR. NO.
REGULATORY PROPERTIESA.1
2
3
4
5
6
7
DEVIATION IN LENGTH & WIDTH
DEVIATION IN THICKNESS
STRAIGHTNESS OF SIDES
RECTANGULARITY
SURFACE FLATNESS
COLOR DIFFERENCES
GLOSSINESS
±0.5%
±5.0%
±0.5%
±0.5%
±0.5%
UNALTERED
AS PER MANUFACTURER
±0.1%
±4.0%
±0.1%
±0.2%
±0.2%
NO CHANGE
MIN 90%
ISO-10545-2
ISO-10545-2
ISO-10545-2
ISO-10545-2
ISO-10545-2
ISO-10545-2
GLOSS METER
MASSIVE MECHANICAL PROPERTIESC.1
2
3
FLEXURAL MODULUS OF RUPTURE
FLEXURAL BREAKING STRENGTH
IMPACT RESISTANCE
MIN 35 N/mm²
MIN 1300 N
AS PER MANUFACTURER
MIN 40N/mm²
MIN 2000 N
MIN 0.55
ISO-10545-4
ISO-10545-4
ISO-10545-5
STRUCTURAL PROPERTIESB.1
2
WATER ABSORPTION
APPARENT DENSITY
≤ 0.5%
> 2.0gm/cc
< 0.1%
>2.28 gm/cc
ISO-10545-3
DIN 51082
1
2
CHEMICAL RESISTANCE
STAIN RESISTANCE
NO DAMAGE
RESISTANT
NO DAMAGE
RESISTANT
ISO-10545-13
ISO-10545-14
CHEMICAL PROPERTIESF.
1 SLIP RESISTANCE (FRICTION COEFFICIENT) >0.40 >0.42 ISO-10545-17
SAFETY PROPERTIESF.
1
2
3
4
FROST RESISTANCE
THERMAL SHOCK RESISTANCE
MOISTURE EXPANSION
THERMAL EXPANSION
NO DAMAGE
NO DAMAGE
NIL
MAX 9.0 x 10¯6
NO DAMAGE
NO DAMAGE
NIL
MAX 6.5 x 10-6
ISO-10545-12
ISO-10545-9
ISO-10545-10
ISO-10545-8
THERMO HYGROMETRIC PROPERTIESE.
SURFACE MECHANICAL PROPERTIESD.1
2
DEEP ABRASION RESISTANCE
MOH'S HARDNESS
MAX 175 mm³
MIN 6
MAX 150 mm³
6 MIN
ISO-10545-6
EN101
TECHNICAL SPECIFICATION
Akij House, 198 Bir Uttam Mir Shawkat Sarak(Gulshan Link Road), Tejgaon, Dhaka-1208, Bangladesh
For More: +880 1755621492-3
Corporate Office
Mozaffar Tower, 55 Bir Uttam C.R. Dutta Road(Old 41 Paribagh, Sonargaon Road), Banglamotor,
Dhaka-1000, BangladeshCell: +88 01777717583
3rd floor, Navana Zohura Square22 Mymensingh Road, Banglamotor,
Ramna, Dhaka. Mobile: +88 01713998704
Dhaka
1 Shahjalal Uposhohor, Block DCell: +88 01777717586
Sylhet
Mukkhopur, Trishal, Mymensingh, BangladeshFactory
Exclusive Experience Centre
