1
:RODUCT SHOWCASE DC POWER SUPPLY The new LT Series DC power supply from Dynatronix, Inc. is designed for reel-to*reel line and other PLC- driven processes. Three basic DC power supplies are equipped with two 10-turn potentiometers for Voltage, current, or crossover regulation and two digital meters for voltage and cur- rent read-back~ The only available option is an analog interface board for PLC control. The LT Series power sup- plies are available in 12-, 24-, or 48- volt configurations, with current rat- ings from 10 to 300 amps. These models measure 7 in. X 17 in. X 22 in. Also available are 10-, 500-, or 1,000- amp models, which measure 10.5 in. X 17 in. X 22 in. The LT Series power supplies are packaged in attractive 316 stainless steel so they will stand up to the harsh environments often found in plating shops. For more infor- mation, visit www.dynatronix.com. Circle 156 on reader information card Barrels Filters Baskets Filter Presses Blowers Fittings Boilers Fixtures Chillers : Forklifts Coils Heaters Compressors Hoists Lab Equipment Meters Mixers Ovens Plating Lines Powder Lines Pumps Rectifiers Skimmers Tanks Valves Ventilation Washers Waste Treatment More equipment, cheaper prices. At your fingertips every hour, of every day. Just point and click. Phone: 1.(828) 278-2103 Fax: 1.(704) 973-9750 |nfo@ftntshingmal~ket.com www.finishingmarket.com "Einishing for the future" www~u~,com, Circle 061 on reader information card or go to www.metalfinishing.com/advertisers DC. PULSE, AND PULSE-REVERSE RECTIFIERS American Plating Power, LLC offers state-of-the-art power supplies for general metal finishing industries and the printed circuit board industry. Models include DC, pulse, and pulse-reverse rectifiers utilizing switched mode, thyristor, tap switch, and variable transformer technol- ogy. Power supply systems can be air-, water-, or oil-cooled, depending on application and requirements. For more informa- tion, visit www.usplating.com. Circle 157 on reader information card January 2007 55
