HYBRID dCSS MULTISWITCH SCD416/1 4 CABLES 1TAP SCD416/1 TYPE CASCADABLE IF-SAT FREQUENCY RANGE MHz 250... 2400 OUTPUT FREQUENCY RANGE MHz 950... 2150 N° INPUTS / OUTPUTS 4 / 4 N° TAP 1 IF-SAT INPUT RANGE WITH LNB QUATTRO dBµV 60... 100 IF-SAT INPUT RANGE WITH LNB WIDE BAND dBµV 70... 100 IF-SAT A.C.G. RANGE dBµV 60... 90 SCR/dCSS OUTPUT LEVEL (per transponder) dBµV 85 LEGACY OUTPUT LEVEL (per transponder) dBµV 78 THROUGH LOSS IF-SAT dB ≤ 1 LEGACY SWITCHING 13/18 22KHZ O.L. LNB WIDE BAND FREQUENCY GHZ 10.41 SCR USER BAND Vs FREQUENCY ALLOCATIONS MHz COMPLIES WITH EN 50494 COMPLIES WITH EN 50607 UB1= 1210 UB1= 1210 UB2= 1420 UB2= 1420 UB3= 1680 UB3= 1680 UB4= 2040 UB4= 2040 UB5= 985 UB5= 985 UB6= 1050 UB6= 1050 UB7= 1115 UB7= 1115 UB8= 1275 UB8= 1275 UB9= 1340 UB10= 1485 UB11= 1550 UB12= 1615 UB13= 1745 UB14= 1810 UB15= 1875 UB16= 1940 CROSS-POL. ISOLATION dB > 30 INPUTS - OUTPUTS ISOLATION dB > 30 PHASE NOISE dBc/Hz -90 @ DELTA F=1KHz RETURN LOSS dB > 12 LNB POWER LINE Vertical Low Band MAXIMUM CURRENT DRAIN @ 13V (16 SLOTS) mA 310 MAXIMUM LNB POWER mA 500 DIMENSIONS mm 94x87x34 1 tap up to 16 tuners Programmable through the PSCD-01 Programmer Remote power supply from decoder Selectable LNB Quattro/ Wide Band mode IF-SAT with Automatic Control Gain SCR/dCSS/Legacy Automatic selection Diagnostic/Status Led dCSS Technology Multiswitch COMPLIES WITH EN 50607 / EN 50494 WARRANTY WARRANTY YEARS
Transcript
HYBRID dCSS MULTISWITCH
SCD416/1
4 CABLES 1TAP SCD416/1
TYPE CASCADABLE
IF-SAT FREQUENCY RANGE MHz 250... 2400
OUTPUT FREQUENCY RANGE MHz 950... 2150
N° INPUTS / OUTPUTS 4 / 4
N° TAP 1
IF-SAT INPUT RANGE WITH LNB QUATTRO dBµV 60... 100
IF-SAT INPUT RANGE WITH LNB WIDE BAND dBµV 70... 100
IF-SAT A.C.G. RANGE dBµV 60... 90
SCR/dCSS OUTPUT LEVEL (per transponder) dBµV 85
LEGACY OUTPUT LEVEL (per transponder) dBµV 78
THROUGH LOSS IF-SAT dB ≤ 1
LEGACY SWITCHING 13/18 22KHZ
O.L. LNB WIDE BAND FREQUENCY GHZ 10.41
SCR USER BAND Vs FREQUENCY ALLOCATIONS MHz COMPLIES WITH EN 50494 COMPLIES WITH EN 50607
1 tap up to 16 tuners Programmable through the PSCD-01 Programmer Remote power supply from decoder Selectable LNB Quattro/ Wide Band mode IF-SAT with Automatic Control Gain SCR/dCSS/Legacy Automatic selection Diagnostic/Status Led
dCSS Technology Multiswitch
COMPLIES WITH EN 50607 / EN 50494
WARRANTYWARRANTY YEARS
HYBRID dCSS MULTISWITCH
SCD416/2
WARRANTYWARRANTY YEARS
4 CABLES 2 TAPS SCD416/2
TYPE CASCADABLE
IF-SAT FREQUENCY RANGE MHz 250... 2400
OUTPUT FREQUENCY RANGE MHz 950... 2150
N° INPUTS / OUTPUTS 4 / 4
N° TAP 2
IF-SAT INPUT RANGE WITH LNB QUATTRO dBµV 60... 100
IF-SAT INPUT RANGE WITH LNB WIDE BAND dBµV 70... 100
IF-SAT A.C.G. RANGE dBµV 60... 90
SCR/dCSS OUTPUT LEVEL (per transponder) dBµV 85
LEGACY OUTPUT LEVEL (per transponder) dBµV 78
THROUGH LOSS IF-SAT dB ≤ 1
LEGACY SWITCHING 13/18 22KHZ
O.L. LNB WIDE BAND FREQUENCY GHZ 10.41
SCR USER BAND Vs FREQUENCY ALLOCATIONS MHz COMPLIES WITH EN 50494 COMPLIES WITH EN 50607
2 taps up to 32 tuners Programmable through the PSCD-01 Programmer Remote power supply from decoder Selectable LNB Quattro/ Wide Band mode IF-SAT with Automatic Control Gain SCR/dCSS/Legacy Automatic selection Diagnostic/Status Led
dCSS Technology Multiswitch
COMPLIES WITH EN 50607 / EN 50494
HYBRID dCSS MULTISWITCH
With the LNB Wide Band you only need 4 coaxial cables for a distribution with two SAT. The SCD416/1 multiswitch and the LNB Wide Band are powered directly by the connected decoders.
With the LNB Wide Band you only need 2 coaxial cables for a distribution with one SAT. The SCD416/2 multiswitch and the LNB Wide Band are powered directly by the connected decoders.
With the LNB Wide Band you only need 4 coaxial cables for a distribution with two SAT. The SCD416/2 multiswitch and the LNB Wide Band are powered directly by the connected decoders.
LNB Power Path
QUATTROLNB
WIDE BAND
LNB Selector
V H
LNBWB1
Decoder SCR
SCD416/2
MySky HD
V H
LNBWB1
V H
LNBWB1
A B
DecoderSCR
SCD416/2
MySky HD
V H
LNBWB1
V H
LNBWB1
A B
SCD416/1 Decoder SCR
HYBRID dCSS MULTISWITCH
LNB Selector
QUATTROLNB
WIDE BAND
Distribution with multiswitches of the SCD416 with the head amplifier ASX/20 which amplifies and equalizes the IF-SAT backbone signals and powers the LNB. IF there is more than one SCR decoder on the same tap, you can use the S2 and S4 smart splitters.
