+ All Categories
Home > Documents > DCT3416 Quick Start Guide - Customer Support Portal · IEEE 1394 60Hz 4 M X S-VIDEO IF ICAL IF TV...

DCT3416 Quick Start Guide - Customer Support Portal · IEEE 1394 60Hz 4 M X S-VIDEO IF ICAL IF TV...

Date post: 22-May-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN RF IN IR RF OUT HDMI SATA USB ETHERNET IEEE 1394 UNSWITCHED 105 -125V 60Hz 4A MAX 500W MAX S-VIDEO SPDIF OPTICAL SPDIF TV PASS CARD Pb Y Pr CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN RF IN IR RF OUT HDMI SATA USB ETHERNET IEEE 1394 UNSWITCHED 105 -125V 60Hz 4A MAX 500W MAX S-VIDEO SPDIF OPTICAL SPDIF TV PASS CARD VIDEO AUDIO R L Pb Y Pr CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN RF IN IR RF OUT HDMI SATA USB ETHERNET IEEE 1394 UNSWITCHED 105 -125V 60Hz 4A MAX 500W MAX S-VIDEO SPDIF OPTICAL SPDIF TV PASS CARD VIDEO AUDIO R L Pb Y Pr DCT3416 Quick Start Guide Follow the cabling diagram below that best matches your home entertainment configuratio Refer to the DCT3416 User Guide at for safety instructions and other detailed instructions. NOTE: Allow 2 inches of clearance around the DCT3416 for proper ventilation. n. www.motorola.com/videoproducts Connecting to an A/V Receiver - Audio Only Cabling to an HDTV - Audio Only Cabling to an HDTV If you are not using the HDMI combination video/audio connector, the optical digital connector is the preferred audio connection if your entertainment system has it. Digital Coax input is next in the order of optimal performance. Stereo (red and white) connectors are the third choice and will not support Dolby Digital Surround sound. If you are not using the HDMI combination video/audio connector, the optical digital connector is the preferred audio connection if your entertainment system has it. Digital Coax input is next in the order of optimal performance. Stereo (red and white) connectors are the third choice and will not support Dolby Digital Surround sound. - - - - Make sure you connect the coaxial cable securely. Either hand tighten or tighten with a quarter turn of a wrench. Too loose or too tight can cause problems. HDMI is the preferred connection if your HDTV has it. This combines digital video and audio. IEEE1394 is a digital connection for video and audio but does not support the Interactive Program Guide and Viewer menu system. Component Video (Red-Green-Blue) is an analog video connection that supports High-Definition video formats. A/V receiver DIGITAL INPUT TV/MONITOR OUTPUT SPEAKER CONNECTORS COAX VIDEO S-VIDEO R DVD CABLE/TV VIDEO 2 IN OUT VCR AUDIO VIDEO L VIDEO S-VIDEO OPTICAL Either / or Cable in CABLE/ ANTENNA IN OPTICAL SPDIF INPUT AUDIO LEFT DIGITAL INPUT COAX AUDIO RIGHT HDTV Cable in Either / or CABLE/ ANTENNA IN Component Video Input Y Pb Pr HDMI IEEE 1394 HDTV Either / or Cable in RF IN IR RF OUT HDMI SATA USB ETHERNET IEEE 1394 UNSWITCHED 105 -125V 60Hz 4A MAX 500W MAX S-VIDEO SPDIF OPTICAL SPDIF VIDEO AUDIO R L Pb Y Pr TV PASS CARD CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Connectors RF IN RF OUT SPDIF OPTICAL SPDIF VIDEO Pr Pb Y HDMI IEEE 1394 AUDIO L R S-VIDEO Red text denotes: FUTURE USE
Transcript
Page 1: DCT3416 Quick Start Guide - Customer Support Portal · IEEE 1394 60Hz 4 M X S-VIDEO IF ICAL IF TV PASS CARD VIDEO R L Pb Y Pr RF IN IR RF OUT HDMI USB SATA ETHERNET IEEE 1394 UNSWITCHED

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

RF IN

IR

RF OUT

HDMI

SATAUSB

ETHERNET

IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX

S-VIDEO

SPDIF

OPTICALSPDIF TV PASS CARD

VIDEO

AUDIO

R

L Pb

Y

PrCAUTION

RISK OF ELECTRIC SHOCKDO NOT OPEN

RF IN

IR

RF OUT

HDMI

SATAUSB

ETHERNET

IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX

S-VIDEO

SPDIF

OPTICALSPDIF TV PASS CARD

VIDEO

AUDIO

R

L Pb

Y

PrCAUTION

RISK OF ELECTRIC SHOCKDO NOT OPEN

RF IN

IR

RF OUT

HDMI

SATAUSB

ETHERNET

IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX

S-VIDEO

SPDIF

OPTICALSPDIF TV PASS CARD

VIDEO

AUDIO

R

L Pb

Y

Pr

DCT3416 Quick Start GuideFollow the cabling diagram below that best matches your home entertainment configuratioRefer to the DCT3416 User Guide at for safety instructions

and other detailed instructions. NOTE: Allow 2 inches of clearance around the DCT3416 for proper ventilation.

n.www.motorola.com/videoproducts

Connecting to an A/V Receiver - Audio Only

Cabling to an HDTV - Audio OnlyCabling to an HDTV

If you are not using the HDMI combination video/audio connector, the optical digital connector is the preferred audio connection if your entertainment system has it. Digital Coax input is next in the order of optimal performance. Stereo (red and white) connectors are the third choice and will not support Dolby Digital Surround sound.

If you are not using the HDMI combination video/audio connector, the optical digital connector is the preferred audio connection if your entertainment system has it. Digital Coax input is next in the order of optimal performance. Stereo (red and white) connectors are the third choice and will not support Dolby Digital Surround sound.

-

-

-

-

Make sure you connect the coaxial cable securely. Either hand tighten ortighten with a quarter turn of a wrench. Too loose or too tight can cause problems.

HDMI is the preferred connection if your HDTV has it. This combines digita lvideo and audio.

IEEE1394 is a digital connection for video and audio but does not support theInteractive Program Guide and Viewer menu system.Component Video (Red-Green-Blue) is an analog video connection thatsupports High-Definition video formats.

A/V receiver

DIGITAL INPUT

TV/MONITOROUTPUT

SPEAKERCONNECTORS

COAX

VIDEO S-VIDEO

R

DVD

CABLE/TV

VIDEO 2

IN

OUT

VCR

AUDIO VIDEOL VIDEO S-VIDEO

OPTICAL

Either / orCable in

CABLE/ANTENNA IN

OPTICALSPDIF

INPUT

AUDIO LEFT

DIGITAL INPUTCOAX

AUDIO RIGHT

HDTV

Cable in

Either / or

CABLE/ANTENNA IN

ComponentVideo Input

Y

Pb

Pr

HDMI

IEEE 1394

HDTV

Either / or

Cable in

RF IN

IR

RF OUT

HDMI

SATAUSB

ETHERNET

IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX

S-VIDEO

SPDIF

OPTICALSPDIF

VIDEO

AUDIO

R

L Pb

Y

Pr

TV PASS CARD

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

Connectors

RF IN

RF OUT

SPDIF

OPTICAL SPDIF

VIDEO

Pr

Pb

Y

HDMI

IEEE 1394

AUDIOL

R

S-VIDEO

Red text denotes: FUTURE USE

Page 2: DCT3416 Quick Start Guide - Customer Support Portal · IEEE 1394 60Hz 4 M X S-VIDEO IF ICAL IF TV PASS CARD VIDEO R L Pb Y Pr RF IN IR RF OUT HDMI USB SATA ETHERNET IEEE 1394 UNSWITCHED

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

RF IN

IR

RF OUT

HDMI

SATAUSB

ETHERNET

IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX

S-VIDEO

SPDIF

OPTICALSPDIF TV PASS CARD

VIDEO

AUDIO

R

L Pb

Y

PrCAUTION

RISK OF ELECTRIC SHOCKDO NOT OPEN

RF IN

IR

RF OUT

HDMI

SATAUSB

ETHERNET

IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX

S-VIDEO

SPDIF

OPTICALSPDIF TV PASS CARD

VIDEO

AUDIO

R

L Pb

Y

PrCAUTION

RISK OF ELECTRIC SHOCKDO NOT OPEN

RF IN

IR

RF OUT

HDMI

SATAUSB

ETHERNET

IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX

S-VIDEO

SPDIF

OPTICALSPDIF TV PASS CARD

VIDEO

AUDIO

R

L Pb

Y

Pr

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. All other product or service names are the property of their respective owners. © Motorola, Inc. 2007 538759-001-a2/07 MGBI

DCT3416 Quick Start Guide

Connecting a Stereo TV*

HDTV and Digital Surround Sound are not supported in this configuration.

HDTV and Digital Surround Sound are not supported in this configuration.The preferred standard-definition video connection is S-Video. The yellow composite video connector is the next preferred connection. Neither of these video connections support High-Definition TV. Red and white stereo connectors do not support Dolby Digital surround sound.

DIGITAL INPUT

TV/MONITOROUTPUT

SPEAKERCONNECTORS

COAX

VIDEO S-VIDEO

R

DVD

CABLE/TV

VIDEO 2

IN

OUT

VCR

AUDIO VIDEOL VIDEO S-VIDEO

OPTICAL

A/V receiver

CABLE/ANTENNA IN

INPUT

S-VIDEO

VIDEO

AUDIO LEFT

AUDIO RIGHT

To TV

CABLE/ANTENNA IN

INPUT

AUDIO

LR

VIDEO

OUTPUT

AUDIO

LR

VIDEO

Stereo VCR Stereo TV

To TV

CABLE/ANTENNA IN

INPUT

AUDIO

LR

VIDEO

OUTPUT

AUDIO

LR

VIDEO

CABLE/ANTENNA IN

INPUT

Stereo TVStereo VCR

S-VIDEO

VIDEO

AUDIO LEFT

AUDIO RIGHT

CABLE/ANTENNA IN

INPUT

S-VIDEO

VIDEO

AUDIO LEFT

AUDIO RIGHT

Stereo TV Either / or

Cable in

Connecting an A/V Receiver, TV, and VCR**

Connecting a Stereo TVand a Stereo VCR

RF IN

IR

RF OUT

HDMI

SATAUSB

ETHERNET

IEEE 1394 UNSWITCHED105 -125V60Hz4A MAX500W MAX

S-VIDEO

SPDIF

OPTICALSPDIF

VIDEO

AUDIO

R

L Pb

Y

Pr

TV PASS CARD

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

Connectors

RF IN

RF OUT

SPDIF

OPTICAL SPDIF

VIDEO

Pr

Pb

Y

HDMI

IEEE 1394

AUDIOL

R

S-VIDEO

** To play Dolby Digital 5.1 sound through the receiver, connect the DCT3416 to the receiver using the DIGITAL AUDIO COAX or DIGITAL AUDIO OPTICAL connections. Audio R and L connectors do not carry Dolby Digital 5.1. sound.

*When connecting the video path, never connect stereo video and S-video at the same time.

Red text denotes: FUTURE USE


Recommended