DDC Controller Remote I/O Module Human Machine Controller

PEITAN TECHNOLOGY CO., LTD Mail：peitan@peitan.comWeb ：www.peitan.com TEL：886-2-22183491 FAX：886-2-22185595 ADDRESS：4F,NO.501-18,CHUNG-CHENG,ROAD HSIN-TIEN CITY TAIPEI HSIEN, 231 TAIWAN R.O.C

Introduction : A new line of Modbus based IO modules, Smart module for data acquisition and other applications are available now. These IO modules offer good reliability, low-cost solution for distributed IO applications. They are portable, easy integrated with existing Modbus network, and simple to use for end users. Various types of IO modules are available for different kinds of requirements.

All IO modules have LED indications for visualization of IO status (Digital) and diagnostic analysis. Some smart modules is useful for sequence control, DDC control applications. All IO modules have 3 wire RS485 interface with Modbus RTU Protocol.

S-100m software is used to setup communication of IO modules and checks the IO status in PC for diagnosis purpose. With Modbus RTU protocol, these IO modules configured as slaves will be easy to communicate with Modbus master such as SCADA/PLC/HMI. Features :

Portable Modubs connectivity Simple setup and easy handling Upto 240 Modules on RS485 network Smart modules available for special application. Low-cost IO modules addition to existing PLC system Versatile network topology—Bus, Star and daisy-chain. Different types of IO Modules Ai, Ao, Di, Do, Pi all available Free software for module configuration and trouble shooting IO modules used with the third party software via Modbus RTU protocol Intuitive and user friendly software for data monitoring and control on PC Interface with field devices to provide real-time data for SCADA/PLC/HMI LEDs on every module for digital IO status, communication and power supply

Product Category RS-485 adapter

Description Model

Repeater RS232 RS485 TCP

PT-C485 1 1

PT-IPG 1 1

PT-HUB V 1+ 1

PT-ISO V 1+ 4

Remote IO Module & DDC Controller

Description Model RS-485 Digital

input Digital output

Relay output

Analog input

Analog output

Programmable

PT-801M 1 8 0 0 0 0 N

PT-802M 1 16 0 0 0 0 N

PT-811M 1 8 8 0 0 0 N

PT-812M 1 16 8 0 0 0 N

PT-830M 1 0 24 0 0 0 N

PT-844M 1 4 0 4 0 0 N

PT-601M 1 0 0 0 4 0 N

PT-645M 1 4 4 0 4 0 N

PT-610M 1 0 0 0 0 4 N

PT-703M 1 6 4 0 0 0 Y

PT-1000M4 2 *1 *1 *1 *1 *1 Y

EMS Human-Machine Controller

Description Model

Firmware Display interface Keypad interface Mouse interface Ethernet

PT-EMS800 Elite2100 VGA USB USB 1

PT-EMS800C Intra2100C VGA USB USB 1

Software

Description Model

Monitoring & Control Access Server Client

Elite2100 V

Intra2100S V V

Intra2100C V V

Elite4100 V V

Product Introduction

1. Isolated RS232 to RS485 converter( PT-C485)

PT-C485 specification Description Specification

7

Indicating Status Label Power ON Run

RS485 TXD, RXD

LED Indicators

RS232 CTS, RXD, TXD, RTS

1 transformer-couple isolated three wires (with earth) RS485

Interface

1 RS232

RS485 Line Standby Voltage

. 4V minimum without line terminator,

. 0.22V to 0.4V with 120 ohm terminator

Format N81/N82, 9600bps

Communication

Data loop back NO

Power requirement 11-14V DC, 300mA

Storage Temperature -20 to 70 degree C

Operation Temperature 0 to 50 degree C

Humidity 5% to 95% (non-condensing)

Dimension 132mm(W)*138mm(H)*41mm(D)

Weight 260g

Mounting Din rail or wall mount

2. 1 channel RS485 repeater (PT-HUB)

PT-HUB specification Description Specification

High (ON) 2 to15 V or floating, sink current 10μA (max.) Communication control Input Low (Cut) -0.3 to 0.4V, source current 5 mA (max.)

Interfaces 2 transformer-couple isolated three wires (with earth) RS485

Turn Direction Time 60 ns maximum

Direction Hold time 1.5 ms Typical

Disconnect Time 12 μsecond maximum after control Input low

Communication

Connection Time 100 μsecond maximum after control Input high

Power requirement 9-14 DC 90mA

Operation Temperature 0 to 50 degree C

Storage Temperature -20 to 70 degree C

Humidity 5% to 95% (non-condensing)

Dimension 120mm W X 125 mm D X 26 mm H

Weight 249 g

Mounting Din rail or wall mount

3. 4 channel RS485 repeater (PT-ISO)

PT-ISO specification Description Specification

High (ON) 2 to15 V or floating, sink current 10μA (max.) Communication control Input Low (Cut) -0.3 to 0.4V, source current 5 mA (max.) LED indicators 17

. 15 for five RS485 RXD, TXD and Fault

. One for power DC IN

. One for Control input CTRL1

Interface 5 transformer-couple isolated three wires (with earth) RS485

Turn Direction Time

60 ns maximum

Direction Hold time

1.5 ms Typical

Disconnect Time

12 μsecond maximum after control Input low

Communication

Connection Time

100 μsecond maximum after control Input high

Loop impedance to isolate 45 Ohm maximum

Line fault set up time 2 second

Line fault recover time 1 mS

Power requirement 10 to 14 V DC, 500 mA + power distributor output

Power distributor output Four, each 500mA maximum

Fuse of each Power distributor 750mA

Operation Temperature 0 to 50 ℃

Storage Temperature -20 to 70 ℃

Humidity 5% to 95% (non-condensing)

Dimension 120mm W X 134 mm D X 41 mm H

Weight 279 g

Mounting Din rail or wall mount

4. Analog input Module (PT-601M)

PT-601M specification Description Specification CPU 89C52, 18.432MHz Permanent memory size EPROM: 8K Bytes, EEPROM: 512 Bytes Watch-dog 1.5 Sec

No. of AI 4 single ended Signal Range 0 /1 to +5 V, or 0/4 to +20 mA Resolution 12-bit binary Accuracy +-0.5% of range Linearity +LSB Repeatability +LSB Max Input Voltage +6.5V Input Impedance .500K for voltage type .250 for current type

Analog Inputs

Current/Voltage One select jumper for each AI, Jumper on for current Digital outputs (PT641M, PT645M 4 open collector Digital Inputs( PT645M PT-605M 4 dry contact input

15 Indicated status Label Power RUN RS485 RXD,TXD Analog input High/Low AI1,AI2, AI3, AI4 Digital Input DI1, DI2, DI3, DI4

LED indicators

Digital output DO1, DO2, DO3, DO4 Interface One transformer-couple isolated three wires (with Format N81/N82, 9600 Baud, MODBUS RTU

Communication

Turn direction time 2.0-5mS from last bit of query command Power requirement 11-14V DC, 250mA Storage Temperature -20 to 70 degree C Operation Temperature 0 to 50 degree C Humidity 5% to 95% (non-condensing) Dimension 132mm W X 138mm H X 41mm D Weight 275g Mounting Din rail or wall mount

5. Analog output module (PT-610M)

PT-610M specification Description Specification CPU 89C52, 18.432MHz Permanent memory size EPROM: 8K Bytes, EEPROM: 128 Bytes Watch-dog 1.5 Sec

No. of AO 4 single ended Signal Range 0 /1 to +5 V, or 0/4 to +20 mA Resolution 12-bit binary Accuracy . +-0.5% of full scale for current mode. Output Impedance . 250 Ohms maximum for voltage output Burden . 480 Ohm maximum for current output at 12V power Output Load ＞20K(Voltage mode) Max Output Current 2 mA in voltage mode Output Overload Protection against short circuit condition not exceed Response Time 200msec maximum for a resistive load from 0 to Full

Analog Output

Current/Voltage One select jumper for each AO, Jumper on for Voltage 3 Indicated status Label Power RUN

LED indicators

RS485 RXD,TXD Interface One transformer-couple isolated three wires (with Format N81/N82, 9600bps, MODBUS RTU

Communication

Turn direction time 2.0-5mS from last bit of query command Power requirement 12V DC, 250mA Storage Temperature -20 to 70 degree C Operation Temperature 0 to 50 degree C Humidity 5% to 95% (non-condensing) Dimension 132mm W X 138mm H X 41mm D Weight 275g Mounting Din rail or wall mount

6. Digital input module (PT-801M)

PT-801M specification Description Specification CPU 89C51

Permanent memory size EPROM: 4K Bytes, EEPROM: 128 Bytes

Watch-dog 2 Sec

Digital Inputs 8 dry contact or TTL signal input Accept signal frequency < 7.5Hz Loop impedance less than 150 Ohm

11

Indicated status Label Power RUN

RS485 RXD,TXD

LED indicators

Input signal DI1 to DI8

Interface One transformer-couple isolated three wires (with earth) RS485

Format N81/N82, 9600bps, MODBUS RTU

Communication

Turn direction time 2.0 mS from last bit of query command

Power requirement DC 12V +- 12%, 100mA

Storage Temperature -20 to 70 degree C

Operation Temperature 0 to 50 degree C

Humidity 5% to 95% (non-condensing)

Dimension 132mm W X 138mm H X 41mm D

Weight 280g

Mounting Din rail or wall mount

7. Digital input module (PT-802M)

PT-802M specification Description Specification CPU 89C51

Permanent memory size EPROM: 4K Bytes, EEPROM: 128 Bytes

Watch-dog 2 Sec

Digital Inputs 16 dry contact or TTL signal input Accept signal frequency < 7.5Hz Loop impedance less than 150 Ohm

19

Indicated status Label Power RUN

RS485 RXD,TXD

LED indicators

Input signal DI1 to DI16

Interface One transformer-couple isolated three wires (with earth) RS485

Format N81/N82, 9600bps, MODBUS RTU

Communication

Turn direction time 2.0 mS from last bit of query command

Power requirement DC 12V +- 12%, 100mA

Storage Temperature -20 to 70 degree C

Operation Temperature 0 to 50 degree C

Humidity 5% to 95% (non-condensing)

Dimension 132mm W X 138mm H X 41mm D

Weight 280g

Mounting Din rail or wall mount

8. Digital input and output module (PT-811M)

PT-811M specification Description Specification CPU 89C51 Permanent memory size EPROM: 4K Bytes, EEPROM: 128 Bytes Watch-dog 2 Sec Digital Inputs 8 dry contact or TTL signal input

Quantity 8 Open Collect output Voltage Range 0 to 12V Voltage of Low 0.4V at Sink current 40 mA (max)

Digital Outputs

Voltage of High 12V DC max. 19 Indicated status Label Power RUN RS485 RXD,TXD Input signal DI1 to DI8

LED indicators

Output Signal DO1 to DO8 Interface One transformer-couple isolated three wires (with Format N81/N82, 9600bps, MODBUS RTU

Communication

Turn direction time 2.0 mS from last bit of query command Power requirement DC 12V +- 12%, 350mA Storage Temperature -20 to 70 degree C Operation Temperature 0 to 50 degree C Humidity 5% to 95% (non-condensing) Dimension 132mm W X 138mm H X 41mm D Weight 280g Mounting Din rail or wall mount

9. Digital input and output module (PT-812M)

PT-812M specification Description Specification CPU 89C51 Permanent memory size EPROM: 4K Bytes, EEPROM: 128 Bytes Watch-dog 2 Sec Digital Inputs 16 dry contact or TTL signal input

Quantity 8 Open Collect output Voltage Range 0 to 12V Voltage of Low 0.4V at Sink current 40 mA (max)

Digital Outputs

Voltage of High 12V DC max. 27 Indicated status Label Power RUN RS485 RXD,TXD Input signal DI1 to DI16

LED indicators

Output Signal DO1 to DO8 Interface 1 transformer-couple isolated three wires (with earth) Format N81/N82, 9600bps, MODBUS RTU

Communication

Turn direction time 2.0 mS from last bit of query command Power requirement DC 12V +- 12%, 350mA Storage Temperature -20 to 70 degree C Operation Temperature 0 to 50 degree C Humidity 5% to 95% (non-condensing) Dimension 132mm W X 138mm H X 41mm D Weight 280g Mounting Din rail or wall mount

10. Digital output module (PT-830M)

PT-830M, PT830MCC, PT830MCA specification Description Specification

CPU 89C51

Permanent memory size EPROM: 4K Bytes, EEPROM: 128 Bytes

Watch-dog 2 Sec

Digital Outputs PT830M PT830MCC PT830MCA

Quantity 24 Open Collect 24 Open Collect 24 Open Collect

Voltage Range 0 to 12V 0 to 30V 0 to (DCIN – 1)V

Active state Low Low High

Voltage of Low 0.4V 40 mA max. 4V 150mA max. Floating

Digital Outputs

Voltage of High Floating Floating (DCIN – 1)V,

27

Indicated status Label

Power RUN

RS485 RXD,TXD

LED indicators

Output Signal DO1 to DO24

Interface 1 transformer-couple isolated three wires (with earth)

Format N81/N82, 9600bps, MODBUS RTU

Communication

Turn direction time 2.0 mS from last bit of query command

Power requirement(DCIN) DC 12V +- 12%, 820mA

Storage Temperature -20 to 70 degree C

Operation Temperature 0 to 50 degree C

Humidity 5% to 95% (non-condensing)

Dimension 132mm W X 138mm H X 41mm D

Weight 280g

Mounting Din rail or wall mount

Note 1: Apply separate power supply for load of digital output if load current is larger than 40mA

11.Relay output converter (PT-908M)

PT-908 specification

a、 Conjunction with PT-811M, PT-812M, PT-830M digital output

b、 Relay capacitor： AC 220V/1A，DC 50V/6A resistive load

c、 Relay On Time： 3ms

d、 Relay Off Time： 5ms

e、 Power consumption： 12V DC，350 mA(Max)

f、 Size： 132 x 125 x 42 mm

12. Digital input and relay output module (PT-844M)

PT-844M specification Description Specification CPU 89C51

Permanent memory size EPROM: 4K Bytes, EEPROM: 128 Bytes

Watch-dog 2 Sec

Digital Inputs 4 dry contact or TTL signal input Accept signal frequency < 7.5Hz Loop impedance less than 150 Ohm

Quantity 4 RO

Contact Capacity AC 110/220V 0.2A, DC 12V,2A

Relay Outputs

Active state Relay close

11

Indicated status Label

Power RUN

RS485 RXD,TXD

Input signal IN1 to IN4

LED indicators

Output Signal RLY to RLY4

Interface 1 transformer-couple isolated three wires (with earth) RS485

Format N81/N82, 9600bps, MODBUS RTU

Communication

Turn direction time 2.0 mS from last bit of query command

Power requirement DC 12V +- 12%, 350mA

Storage Temperature -20 to 70 degree C

Operation Temperature 0 to 50 degree C

Humidity 5% to 95% (non-condensing)

Dimension 132mm W X 138mm H X 41mm D

Weight 280g

Mounting Din rail or wall mount

13. pulse accumulator controller (PT-304M, PT-308M)

PT-304M, PT-308M specification Description Specification

CPU 89C51

Permanent memory size EPROM: 4K Bytes, EEPROM: 256 Bytes

Maximum value of Counter 65,535

Maximum value of counter

accumulator

4,294,967,295 (optional)

Memory type of counter Permanent memory

Watch-dog 2 Sec

Counter Inputs 4 (8 for PT-308M) Dry contact or TTL signal input

Accept signal frequency < 25Hz

Loop impedance less than 150 Ohm

Counter stop control input 4 (8 for PT-308M) Dry contact or TTL signal input

Accept signal frequency < 25Hz

Loop impedance less than 150 Ohm

19

Indicated status Label

Power RUN

RS485 RXD,TXD

Counter Input IN1 to IN8

LED indicators

Control input IN9 to IN16 (note 1)

Interface 1 transformer-couple isolated three wires (with earth) RS485

Format N81/N82, 9600bps, MODBUS RTU

Communi

cation

Turn direction time 2.0 mS from last bit of query command

Power requirement DC 12V +- 12%, 350mA

Storage Temperature -20 to 70 degree C

Operation Temperature 0 to 50 degree C

Humidity 5% to 95% (non-condensing)

Dimension 132mm W X 138mm H X 41mm D

Weight 280g

Mounting Din rail or wall mount

note 1: The #1 one counter (IN1) will stop if #1 counter control input (IN9) was inactive, and so on.

14. Sequential on/off controller (PT-703M)

PT-703M specification Description Specification CPU 89C51 Permanent memory size EPROM: 4K Bytes, EEPROM: 128 Bytes Watch-dog 2 Sec Digital Inputs 6 dry contact, 2 for manual Start and stop,

Quantity 4 Open Collect output Voltage Range 0 to 12V Voltage of Low 0.4V at Sink current 40 mA (max)

Digital Outputs

Voltage of High 12V DC max. Sequencer time pitch 5 to 1800 seconds, Programmable Expand connection In cascade Starter Manual start or remote start by communication

13 Indicated status Label Power RUN RS485 RXD,TXD Input signal DI1 to DI6

LED indicators

Output Signal DO1 to DO4 Interface 1 transformer-couple isolated three wires (with earth) Format N81/N82, 9600bps, MODBUS RTU

Communication

Turn direction time 2.0 mS from last bit of query command Power requirement DC 12V +- 12%, 300mA Storage Temperature -20 to 70 degree C Operation Temperature 0 to 50 degree C Humidity 5% to 95% (non-condensing) Dimension 132mm W X 138mm H X 41mm D Weight 270g Mounting Din rail or wall mount

15. EMS DDC controller (PT-1000M4)

a、 Standalone, programmable by menu-driven setting and down load directly .

b、 Non-pc base, Low power consumption, no need fan or heat sink.

c、 Down connect 32 pcs remote module and supervise 512 IO point.

d、 Monitor alarm, Inquiry device status, Remote device Control.

e、 Inquiry environment value – temperature, humidity, voltage, pressure.

f、 Display alarm message when event trigger.

g、 Made 4 different alarm sound depend on alarm priority.

h、 Driven Mimic Panel when alarm trigger.

i、 Save latest 100 alarm records.

j、 Weekly schedule control.

k、 Build-in human interface --16*1 LCD, 4*4 Membrane Keypad & Speaker.

l、 Built-in battery back-up real time clock (RTC).

PT-1000M4 specification

Description Specification CPU 77E58 or ARM7( PT-1000MT)

EPROM 32 Bytes

FRAM 32KB

Backup RAM 128K to 512K Bytes

Memory

EEPROM 256 bytes

RTC (Real Time Clock) Battery backup

Display One row, 16 character, back light

Keyboard Membrane, 16 keys

Speaker Internal 1/4W

Peripheral CPLD

Watch-dog 2 Sec

3

Indicated status Label

Power RUN

LED indicators

RS485 RXD,TXD

Interface 2 transformer-couple isolated three wires (with earth) RS485 or RS485 x 1, Ethernet x 1

Format N81/N82, 9600bps, MODBUS RTU

Communication

Turn direction time 2.0 mS from last bit of query command

Power requirement DC 12V +- 12%, 250mA (PC-1000M4) DC 12V +- 12%, 800mA (PT-1000MT)

Storage Temperature -20 to 70 degree C

Operation Temperature 0 to 50 degree C

Humidity 5% to 95% (non-condensing)

Dimension 260mm(L) x 193mm(w) x 75mm(D)

Weight 270g

Mounting wall mount

16. EMS Human-Machine controller (PT-EMS800)

PT-EMS800 is a embedded EMS client or workstation, build-in EMS software. When it be defined a client (PT-EMS800C), It can easily accept real time message from EMS server. Only need pug in Ethernet port.

When it be defined a workstation, It integrate HMI and Main controller function. It can endure worse environment than P.C, because it’s low power consumption, no moving parts, small size and embedded design. PT-EMS800 workstation can conjunction with PEITAN all remote IO module and DDC controller, Execute security management, environment monitoring and control function. PT-EMS800 specification CPU 32 bits, 800MHZ

Main memory SRAM 256MB

Flash Memory 1GB

O.S XP Embedded

VGA 1,280 x 1,024

Serial RS-232 x 1

LAN 10/100 M Ethernet

Peripheral USB 2.0 x 2

Keyboard PS/2

Mouse PS/2

Parallel Printer port x 1

Size 170 x 124 x 55 mm

Weight 0.92kg

Power 5V ~ 5.25V @4A

Operating temperature 0~60OC

Operating Humidity 0~90%, non-condensing.

17. EMS Software (Elite2100) The Elite2100 is intuitive and user friendly security management, environment monitoring

and control software. It is used conjunction with DDC controller and remote IO module.

Windows XP/2000. Graphic Man-Machine Interface. Supervise 253 DDC controller, 129,536 IO points. 2 serial and 253 IP communication channel. Customers map, icon, device category and alarm voice. Analog level monitoring. Time internal event monitoring. Alarm popup map of event. Alarm trigger event voice. Alarm trigger 1 or more output setting. Inquiry event history by date, time, alarm priority and device name. Inquiry real time device status by category and map. Day schedule security or device control. On-screen device control by device category and map. 3 different management architecture –

Single P.C supervise --- Elite 2100 Server/ client supervise— Intra2100S/ Intra2100C. Web-control interface – web 2100.

Option Integrated digital video--- Live video verification, e-map live video. Weekly schedule device control.

18. EMS integrated ACS software( Elite4100) The Elite4100 is fully integrated Access Control, Security Management, Environment

Monitoring and Control Software. It has not only Elite2100 function but following features.

Supervise 1,024 doors, 3,584 I/O points.(expandable) Real time access controller status display. Real time access controller parameter setting. Elevator floor control setting. Real time card transaction and people picture display. 12 time zone per door site. 1 year holiday per door site. Anti pass back setting. Time and attendance report. Remote open door lock. Inquire card transition by date, time, staff id, card id, door id. Day and month access transaction .txt file for 3’rd party software. Legal card trigger device control.

Option Integrated digital video--- Live video verification, e-map live video. Weekly schedule device control. On-line guard tour.