DEALER MANUAL REV 1.0 - 2018
W W W . P R A X I S - W O R K S . C O MS A N T A C R U Z , C A L I F O R N I A
ROAD CRANKS
ZAYANTE CARBON - M30
• Carbon arms | Direct Mount X-Spider 160/104BCD• 165 / 170 / 172.5 / 175 lengths• X-Rings 48/32, 50/34, 52/36, 53/39 | Alloy CR Bolts• DM 1X 38T, 40T, 42T Wave Tech (other sizes coming soon)
• M30 alloy spindle | Requires Praxis M30 BB• 2X = 10/11sp chains | 1X = 10/11/12sp chains• Approximate weight 615g +/- (172.5 with 50/34)• Q-Factor 147mm• Chainline 43.5 for 2X | 45mm for DM1X
PART#DM-ZC-165-XXXXDM-ZC-170-XXXXDM-ZC-1725-XXXXDM-ZC-175-XXXX
Compatible with both mechanical and electronic 10/11sp shifting systems from Shimano, SRAM and Campagnolo.
Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.
ZAYANTE - M30
• Hollow forged arms | Direct Mount 110BCD• 165 / 170 / 172.5 / 175 lengths• 2X Rings 46/36, 48/32, 50/34, 52/36, 53/39 | Alloy CR Bolts• DM 1X 38T, 40T, 42T Wave Tech (other sizes coming soon)
• M30 alloy spindle | Requires Praxis M30 BB• 2X = 10/11sp chains | 1X = 10/11/12sp chains• Approximate weight 712g +/- (172.5 with 50/34)• Q-Factor 147mm• Chainline 43.5 for 2X | 45mm for DM1X
PART#DM-PZ-165-XXXXDM-PZ-170-XXXXDM-PZ-1725-XXXXDM-PZ-175-XXXX
Compatible with both mechanical and electronic 10/11sp shifting systems from Shimano, SRAM and Campagnolo.
Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.
ROAD CRANKS
ALBA - M30
• Solid forged arms | Direct Mount 110BCD• 165 / 170 / 172.5 / 175 lengths• 2X Rings 46/36, 48/32, 50/34, 52/36 | Alloy CR Bolts• DM 1X 38T, 40T, 42T Wave Tech (other sizes coming soon)
• M30 alloy spindle | Requires Praxis M30 BB• 2X = 10/11sp chains | 1X = 10/11/12sp chains• Approximate weight 775g +/- (172.5 with 50/34)• Q-Factor 147mm• Chainline 43.5 for 2X | 45mm for DM1X
PART#DM-A165-XXXXDM-A170-XXXXDM-A1725-XXXXDM-A175-XXXX
Compatible with both mechanical and electronic 10/11sp shifting systems from Shimano, SRAM and Campagnolo.
Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.
ALBA - M24 (OEM ONLY PRODUCT)
• Solid forged arms | 110BCD integrated spider• 165 / 170 / 172.5 / 175 lengths• 2X Rings 48/32 | Steel CR Bolts (Steel inner ring)• 110BCD 1X 38T, 40T, 42T Wave Tech• M24 cromo spindle | Requires Praxis M24 or ‘SRAM GXP’ BB.• 2X = 10/11sp chains | 1X = 10/11/12sp chains• Approximate weight 786g +/- (172.5 with 50/34)• Q-Factor 147mm• Chainline 43.5 for 2X | 45mm for 1X
Compatible with both mechanical and electronic 10/11sp shifting systems from Shimano, SRAM and Campagnolo.
Note : This is an OEM spec only crank, not an aftermarket crank.
MTN CRANKS
LYFT CARBON - M30 THRU
• Carbon arms | 3-Bolt Direct Mount • 170 / 175 lengths• M30 THRU alloy spindle | Requires Praxis M30 THRU BB• Wave Tech DM ring for 49mm or BOOST 52mm chain line included• Works with 10/11/12sp chains• Approximate weight 460g +/- (175mm with 32T)
• Q-Factor 172mm• Praxis DMA ring = 49mm CL | DMB ring = 52mm BOOST CL
PART#L170-XXXXL175-XXXX
Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains
Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.
LYFT “HD” CARBON - M30 THRU
• Carbon arms | 3-Bolt Direct Mount | “HD” robust carbon layup• 170 length only • Thicker “HD” M30 THRU spindle | Requires Praxis M30 THRU BB• Wave Tech DM ring for 49mm or BOOST 52mm chain line included• Works with 10/11/12sp chains• Approximate weight 548g +/- (170mm with 32T)
• Q-Factor 172mm• Praxis DMA ring = 49mm CL | DMB ring = 52mm BOOST CL
PART#L170-XXXX HD
Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains
Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.
MTN CRANKS
GIRDER CARBON - M30
• Carbon arms | 3-Bolt Direct Mount • 170 / 175 lengths• M30 alloy spindle | Requires Praxis M30 BB• Wave Tech DM ring for 49mm or BOOST 52mm chain line included• Works with 10/11/12sp chains• Approximate weight 550g +/- (175 with 32T)• Q-Factor 172mm• Praxis DMA ring = 49mm CL | DMB ring = 52mm BOOST CL
PART#GC170-XXXXGC175-XXXX
Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains
Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.
GIRDER - M30
• Hollow forged arms | 3-Bolt Direct Mount • 170 / 175 lengths• M30 alloy spindle | Requires Praxis M30 BB• Wave Tech DM ring for 49mm or BOOST 52mm chain line included• Works with 10/11/12sp chains• Approximate weight 605g +/- (175 with 32T)• Q-Factor 172mm• Praxis DMA ring = 49mm CL | DMB ring = 52mm BOOST CL
PART#PG170-XXXXPG175-XXXX
Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains
Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.
MTN CRANKS
CADET - M24 (OEM ONLY PRODUCT)
• Solid forged arms | 3-Bolt Direct Mount • 170 / 175 lengths• M24 cromo spindle | Requires Praxis M24 or ‘SRAM GXP’ BB.• Wave Tech Cromo DM ring for 49mm or BOOST 52mm chain line• Works with 10/11/12sp chains• Approximate weight 756g +/- (175 with 32T cromo ring)• Q-Factor 172mm• Praxis DMA ring = 49mm CL | DMB ring = 52mm BOOST CL
Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains
Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.
Note : This is an OEM spec only crank, not an aftermarket crank.
CADET - M30
• Solid forged arms | 3-Bolt Direct Mount • 170 / 175 lengths• M30 alloy spindle | Requires Praxis M30 BB• Wave Tech DM ring for 49mm or BOOST 52mm chain line included• Works with 10/11/12sp chains• Approximate weight 636g +/- (175 with 32T)• Q-Factor 172mm• Praxis DMA ring = 49mm CL | DMB ring = 52mm BOOST CL
PART#C170-XXXXC175-XXXX
Compatible with both mechanical and electronic shifting systems from Shimano and SRAM. Wave Tech rings compatible with 10/11/12sp chains
Also compatible with 3-Bolt Direct Mount spider power meters from Power2Max, SRM and older Quarq.
ROAD / TT / CX RINGS
ROAD RINGS
• X-RINGS 160/104BCD – 48/32, 50/34, 52/36 and 53/39• BUZZ RINGS 110BCD – 46/36, 48/32, 50/34, 52/36 | 130BCD – 53/39• Cold Forged | LevaTime® shifting technology | 7075 T6 Aluminum• Buzz rings for 5-arm AND 4-arm w/hidden 5th• Buzz rings include a long and a short replaceable threaded chain catch pin• Work with 10/11sp chains • Great for use with Di2, EPS, or eTap shifting systems
X-RING RING PART#X5339-4004 53/39 160/104BCD X-RING BLKX5236-4004 52/36 160/104BCD X-RING BLKX5034-4004 50/34 160/104BCD X-RING BLKX4832-4004 48/32 160/104BCD X-RING BLK
BUZZ RING PART#5339-4004 53/39 130BCD BUZZ BLK5236-4004 52/36 110BCD BUZZ BLK5034-4004 50/34 110BCD BUZZ BLK4832-4004 48/32 110BCD BUZZ BLK (Only installs on Praxis road cranks)4636-4004 46/36 110BCD CX BLK
All Praxis road sets are compatible with 10/11sp mechanical and electronic shifting systems from Shimano, Campagnolo and SRAM. “Buzz” ring set
TT RINGS
• 130BCD – 54/42 56/42• LevaTime® shifting technology• Machined mfg. | Hard Anodized 7075-T6 Aluminum• Work with 10/11sp chains • Great for use with Di2, EPS, or eTap shifting systems• 56/42 includes a long and a short replaceable threaded chain catch pin as
it’s made for either 5-arm AND 4-arm cranks w/hidden 5th (like SRAM Exogram)
• 54/42 is prior generation for traditional 5-Arm crank
PART#5642-0001 56/42 130BCD TT BLK5442-0001 54/42 130BCD TT BLK
All Praxis road sets are compatible with 10/11sp mechanical and electronic shifting systems from Shimano, Campagnolo and SRAM.
“56/42” ring set
“54/42” ring set
“X-Ring” set
MTN DM RINGS
1X Wave Tech - MTN Direct Mount
• 30 - 36T | 3-Bolt Direct Mount | 7075-T6• Two chainlines offered : DM-A or DM-B• Wave™ Tech tooth profile• 10/11/12sp Shimano/KMC/SRAM• Machined manufacturing with hard black anodizing for durability• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano
Shadow or SRAM Type 2• In rough terrain, or just for security, we still recommend use of an upper guide
PART#30-4001DMA 30T DM-A32-4001DMA 32T DM-A34-4001DMA 34T DM-A36-4001DMA 36T DM-A
30-4001DMB 30T DM-B32-4001DMB 32T DM-B34-4001DMB 34T DM-B36-4001DMB 36T DM-B
All Praxis 1X Wave Tech are compatible with 10/11/12sp chains
**NOTE - IF INSTALLING ON SRAM CRANK, SEE GUIDE ON BACK PAGE
ROAD / GRAVEL / CX RINGS
1X Wave Tech - 110BCD
• 38T, 40T, 42T | 110BCD | 7075-T6• Wave™ Tech tooth profile• 10/11/12sp Shimano/KMC/SRAM• Stamped and machined manufacturing with hard black anodizing for durability• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano
Shadow or SRAM Type 2• In rough terrain, or just for security, we still recommend use of an upper guide
PART#38-0110 38T 110BCD BLK40-0110 40T 110BCD BLK42-0110 42T 110BCD BLK
All Praxis 1X Wave Tech are compatible with 10/11/12sp chains
1X Wave Tech - Road Direct Mount
• 38T, 40T, 42T | 3-Bolt Direct Mount | 7075-T6• Wave™ Tech tooth profile• 10/11/12sp Shimano/KMC/SRAM• Stamped and machined manufacturing with hard black anodizing for durability• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano
Shadow or SRAM Type 2• In rough terrain, or just for security, we still recommend use of an upper guide• 45mm chainline
PART#38-0001 38T DIRECT MOUNT BLK40-0001 40T DIRECT MOUNT BLK42-0001 42T DIRECT MOUNT BLK
All Praxis 1X Wave Tech are compatible with 10/11/12sp chains
MTN RINGS
1X Wave Tech - 104BCD
• 104 BCD | 30, 32, 34, 36T| 7075-T6• Wave™ Tech tooth profile• 10/11/12sp Shimano/KMC/SRAM• Machined manufacturing with hard black anodizing for durability• 30T NOTE: is threaded and needs M8 bolt with min 7.5mm length threads• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano
Shadow or SRAM Type 2• In rough terrain, or just for security, we still recommend use of an upper guide
PART#30-2001 30T 104BCD BLK32-2001 32T 104BCD BLK34-2001 34T 104BCD BLK36-2001 36T 104BCD BLK
All Praxis 1X Wave Tech are compatible with 10/11/12sp chains
1X Wave Tech - 94BCD
• 94 BCD | 30T | 7075-T6• Wave™ Tech tooth profile• 10/11/12sp Shimano/KMC/SRAM• Machined manufacturing with hard black anodizing for durability• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano
Shadow or SRAM Type 2• In very rough terrain, or just for pure security, we still recommend use of
an upper guide
PART#30-2094 30T 94BCD BLK
All Praxis 1X Wave Tech are compatible with 10/11/12sp chains
CHAINGUIDES
• ISCG’05 | HIGH DM | BRAZE-ON• Alloy Booms | Inject mold guide heads• ISCG’05 offers a ‘tall’ or ‘short’ version | Short 26T-32T Tall 26T-38T• Braze-On - For Road/CX use with sizes 38T-46T (frame Braze-on can limit)• 4mm Allen wrench adjusts the vertical, lateral, and guide head angle
PART#ISCG-2632 ISCG Short GuideISCG-2638 ISCG Tall GuideCG-HDM2638 High Direct Mount GuideCG-Braze Braze-on Guide
10sp Wide Range Cassette
• 10sp MTB 11-13-15-17-19-21-24-28-34-40• 11-28 are steel and 34-40 are hard anodized 7075-T6 Al• For 10spd Shimano/SRAM Mid or Long cage MTB derailleurs only• For 1X10 or 2×10 MTB drivetrains only (adjust chain length accordingly)• Weight 322g +/-• Created as a no sacrifice, no compromise ‘Wide-Range’ 10sp MTB
cassette that you can use an unmodified 10sp rear derailleur with. 11-40 gearing allows this all while using your existing 10sp wheels. No modifications, No adaptors
PART#CS-1140
SHIMANO & SRAM — Must be MID or LONG cage 10sp rear derailleur. Always use new 10sp chain of your choice, and set the length depending on if you are riding 1X or 2X drivetrain. Chain length is also a preference for your personal setup. Adjust the rear derailleur B-Tension screw down so the upper pulley clears the 40T cog.
GUIDES / CASSETTE
Braze-On
High DM
ISCG’05
C32 WHEEL & RIM
• WHEEL SET - TRAIL / All Mountain | 27.5″ or 29″• CARBON RIM | 32mm Int. Width | 38mm Ext. Width• 3mm offset Asymmetrical spoke bed for even spoke tension• BOOST | DT350 Front 15×110/DTSwiss 350 Rear 148×12. • Shimano Freehub or XD Driver | DT Star Ratchet mechanism• Tubeless ready with bead lock | Rim strip, valve stem included.• Easy to mount tubeless tires with floor pump• J-Bend spokes / External Alloy nipples for easy service• Pressure-Do not exceed tire manufacturer’s recommended pressure.• Approx Weight- 29″ set: 1766g | 27.5″ set: 1758g (with rim strips/valve)
• RIM ONLY - TRAIL / All Mountain | 32 Hole | 27.5″ or 29″• Approx Weight – 27.5″ : 424g 29″ : 475g
PART#WL-C32-29SH BOOST SETWL-C32-29XD BOOST SETWL-C32-27SH BOOST SETWL-C32-27XD BOOST SETC32-29 RIMC32-27 RIM
WHEELS / RIMS
AL32 WHEEL & RIM
• WHEEL SET - TRAIL / All Mountain | 27.5″ or 29″• ALLOY RIM | 32mm Int. Width | 38mm Ext. Width• 3mm offset Asymmetrical spoke bed for even spoke tension• BOOST | DT370 Front 15×110 /DTSwiss 370 Rear 148×12. • Shimano Freehub or XD Driver | DT Pawl mechanism• Tubeless ready with bead lock | Rim strip, valve stem included.• Easy to mount tubeless tires with floor pump• J-Bend spokes / External Alloy nipples for easy service• Pressure-Do not exceed tire manufacturer’s recommended pressure.• Approx Weight- 29″ set: 1914g | 27.5″ set: 1830g (with rim strips & valve)
• RIM ONLY - TRAIL / All Mountain | 32 Hole | 27.5″ or 29″• Approx Weight 29″ : 518g | 27.5″ : 490g
PART#WL-AL32-29SH BOOST SETWL-AL32-29XD BOOST SETWL-AL32-27SH BOOST SETWL-AL32-27XD BOOST SETAL32-29 RIMAL32-27 RIM
19mm
RC21 WHEEL & RIM
• WHEEL SET - CX / Gravel / Road | 700C | DISC ONLY• CARBON RIM | 21mm Int. Width | 27mm Ext. Width• Praxis by DTSwiss 350 Front and Rear 32H • Shimano Freehub or XD Driver | DT Star Ratchet mechanism• Front 15mm Thru Axle | Rear 142/12mm Thru Axle• Tubeless ready with bead lock | Rim strip, valve stem included.• Easy to mount tubeless tires with floor pump• J-Bend spokes / External Alloy nipples for easy service• 1524g pair w/out Thru-axles • Pressure-Do not exceed tire manufacturer’s recommended pressure.
• RIM ONLY - CX / Gravel / Road | 700C | DISC ONLY• Approx Weight – 374g
PART#WL-RC21-700SHIM SETWL-RC21-700XD SETRC21 RIM
WHEELS / RIMS
M30 - BSA ENGLISH THREADED• For Praxis M30 spindle cranks installing on a BSA/Eng. threaded frame• 68mm Road version / 68/73mm MTB setup• 30mm Drive bearing / 28mm NonDrive bearing | cartridge bearings• Wave washer on drive-side for bearing preload• Ceramic version is Grade 5 / ABEC 5 rating• Forged & machined heat-treated AL Cups• Praxis M30 BB tools required for installation – Sold separately
“M30” BOTTOM BRACKETS
M30 - BB86 | BB90 | BB92• For Praxis M30 spindle cranks installing on: BB86 ROAD/BMX | BB90/BB92 MTN• 30mm Drive bearing / 28mm NonDrive bearing | Steel cartridge bearings• Wave washer on drive-side for bearing preload• Unique design in which the bearing outer race is also the outer press fit surface
M30 - T47 THREADED (External Bearing)• For Praxis M30 spindle cranks installing on a T47 threaded 68/73mm frame• 68mm Road version / 68/73mm MTB setup• 30mm Drive bearing / 28mm NonDrive bearing | cartridge bearings• Wave washer on drive-side for bearing preload• Ceramic version is Grade 5 / ABEC 5 rating• Forged & machined heat-treated AL Cups• Praxis M30 BB tools required for installation – Sold separately
M30 - 386EVO• For Praxis M30 spindle cranks installing on 386EVO road bikes• 30mm Drive bearing / 28mm NonDrive bearing | Steel cartridge bearings• Wave washer on drive-side for bearing preload• Ceramic version is Grade 5 / ABEC 5 rating• Inject molded cups for press fit 386EVO
M30 - BB30 & PF30• New updated design with rubber expanding collet.• For Praxis M30 spindle cranks installing on a BB30 or PF30 frame• 68mm Road version / 73mm MTB setup (68mm cannot be used for MTN!)• 30mm Drive bearing / 28mm NonDrive bearing | cartridge bearings• Wave washer on drive-side for bearing preload• Ceramic version is Grade 5 / ABEC 5 rating• Forged & machined heat-treated AL Cups• Praxis M30 BB tools required for installation – Sold separately
M30 - BBRight • New updated design with rubber expanding collet.• For Praxis M30 spindle cranks installing on a BBRight frame• 30mm Drive bearing / 28mm NonDrive bearing | cartridge bearings• Wave washer on drive-side for bearing preload• Ceramic version is Grade 5 / ABEC 5 rating• Forged & machined heat-treated AL Cups• Praxis M30 BB tools required for installation – Sold separately
PART#68-0201B M30 BSA68-5201B M30 BSA Ceramic
PART#86-4001B M30 BB86/90/92
PART#47-0000 M30 T47
PART#86-6000 M30 386EVO86-5000 M30 386EVO Ceramic
PART#68-4001R M30 BB/PF30 68MM ROAD 68-5401R M30 BB/PF30 68MM ROAD CERAMIC(For older SBC Carbon OSBB 61.5mm road bikes, add TP-3002)
73-4001R M30 BB/PF30 73MM MTN 73-5401R M30 BB/PF30 68MM MTN CERAMIC
PART#79-4001R M30 BBRight79-5001R M30 BBRight Ceramic
M30 THRU - BSA ENGLISH THREADED• For installing Praxis LYFT crank into BSA threaded frames• Also good for RaceFace/Easton “Cinch” cranks or Rotor Rex/3D+ cranks• 68mm Road version / 68/73mm MTB setup• 30mm Drive bearing / 30mm NonDrive bearing | Steel cartridge bearings• Forged & machined heat-treated AL Cups• Praxis M30 BB tool required for installation – Sold separately
“M30 THRU” BOTTOM BRACKETS
M30 THRU - BB86 | BB90 | BB92• For installing Praxis LYFT crank into BB90 or BB92 MTN frames• Also good for RaceFace/Easton “Cinch” cranks or Rotor Rex/3D+ cranks• BB90 or BB92 MTN | BB86 ROAD • 30mm Drive bearing / 30mm NonDrive bearing | Steel cartridge bearings
M30 THRU - BB30 & PF30• New updated design with rubber expanding collet.• For installing Praxis LYFT crank into BB30 or PF30 MTN frames• Also good for RaceFace/Easton “Cinch” cranks or Rotor Rex/3D+ cranks• 73mm MTN setup• 30mm Drive bearing / 30mm NonDrive bearing | Steel cartridge bearings• Forged & machined heat-treated AL Cups• Praxis M30 BB tools required for installation – Sold separately
PART#68-4201 M30 THRU BSA
PART#86-4201 M30 THRU BB86/90/92
PART#73-4101R M30 THRU BB/PF30 73MM MTN
M24 - BSA ENGLISH THREADED• For steel spindle Praxis M24, Oval Concepts M24, and SRAM Gxp cranks• 68/73mm for Road or MTN• 24mm Drive bearing / 22mm NonDrive bearing | Steel cartridge bearings• Wave washer on drive-side for bearing preload
M24 - BB86 | BB90 | BB92• For steel spindle Praxis M24, Oval Concepts M24, and SRAM Gxp cranks• BB86 Road | BB90 & BB92 MTN• 24mm Drive bearing / 22mm NonDrive bearing | Steel cartridge bearings• Wave washer on drive-side for bearing preload• Pressfit Delrin Cups
PART#86-0301 M24 BB86/90/92
PART#68-0301 M24 BSA
“M24” BOTTOM BRACKETS
SHIMANO TO BB30/PF30 - CONVERSION BB
• New updated design with rubber expanding collet.• This version for Shimano™ Hollowtech II steel spindle cranks only.• Designed precisely to Shimano bearing stance & chain line spec.• Forged & machined heat-treated 7075 T6 Aluminum• 68MM is for Road bikes only | 73mm is for MTN bikes only.• Steel version : Enduro 2437• Ceramic Version : Enduro 2437 Angular contact, Grade5 balls, ABEC5 Assembly• 68mm version cannot be used for MTN Cranks!
PART#68-3001R ROAD 68mm BB30/PF30 SHIMANO68-3002R ROAD 68mm OSBB SHIMANO (’14/earlier SBC road)68-5001R ROAD 68mm BB30/PF30 SHIMANO CERAMIC73-3001R MTN 73mm BB30/PF30 SHIMANO73-5001R MTN 73mm BB30/PF30 SHIMANO CERAMIC
CONVERSION BOTTOM BRACKETS
SRAM GXP/M24 TO BB30/PF30 - CONVERSION BB
• New updated design with rubber expanding collet.• For steel spindle Praxis M24, Oval Concepts M24, and SRAM Gxp cranks• 68MM is for Road bikes only | 73mm is for MTN bikes only.• Designed precisely to SRAM™ GXP bearing stance & chain line spec.• Forged & machined heat-treated 7075 T6 Aluminum• Enduro 2437 Drive /2237ER Non-Drive steel bearings• 68mm version cannot be used for MTB Cranks!
PART#68-3201R ROAD 68mm BB30/PF30 SRAM GXP/M24 73-3201R MTN 68mm BB30/PF30 SRAM GXP/M24(For older SBC Carbon OSBB 61.5mm road bikes, add TP-3002)
CAMPAGNOLO ULT TO BB30/PF30 - CONVERSION BB
• For Campagnolo / Fulcrum UltraTorque cranks only• Designed precisely to Campy ULT bearing stance & chain line spec.• Forged & machined heat-treated 7075 T6 Aluminum• For 68mm Road BB30, PF30• Non drive wavy washer and drive side outer clip included• Bearings not included as they are pressed on your Campy ULT crank
PART#68-3101 ROAD 68mm BB30/PF30 CAMPAGNOLO ULT (For older SBC Carbon OSBB 61.5mm road bikes, add TP-3002)
“Shimano Threaded” BOTTOM BRACKETS
SHIMANO - BSA THREADED• Machined Aluminum cups• For installing Shimano™ Hollowtech II cranks into BSA threaded frames• Cartridge Enduro 2437 steel with high grade grease and fill• 68mm version for Road / 68/73mm version for MTN
PART#68-0001 68mm ROAD BSA THREADED SHIMANO ROAD 73-0002 68/73mm MTN BSA THREADED SHIMANO MTN
SHIMANO - T47 THREADED (External Bearing)• Machined Aluminum cups• For installing Shimano™ Hollowtech II cranks into T47 threaded frames• Cartridge Enduro 2437 steel with high grade grease and fill• 68/73mm version for both Road and MTN
PART#47-3001 68/73mm T47 ROAD/MTN SHIMANO
M30 TOOL - SOCKET SET (2pk)• FOR PRAXIS M30/M30 THRU BOTTOM BRACKETS ONLY• This is NOT the tool for our Shimano/SRAM/Campy Conversion BB• For the Praxis M30 BB’s and the new M30 THRU BB30/PF30 BB’s• Sold as a 2pack of M30 BB tool. Tool interface is for 3/8″ drive socket• *2 tools are required for installation/removal of Rubber Collet version BB’s
PART#TP-0030 M30 SOCKET TOOL (2PK)
M30 TOOL - WRENCH (single)• FOR PRAXIS M30/M30 THRU BOTTOM BRACKETS ONLY• This is NOT a tool for our Shimano/SRAM/Campy Conversion BB• Only for use with Praxis M30/M30 THRU BSA, M30 BB30/PF30
PART#TP-0030 M30 WRENCH (SINGLE)
SPARE PARTS / TOOLS
PF SLEEVES - PF30 or OSBB• Replacement delrin PF30 sleeve for Praxis Conversion BB’s / Collet BB’s• Great if you move Conv/Collet BB from one type of frame to another• Choose 68mm if you have a 68mm Road Conversion• Choose 73mm if you have a 73mm MTB Conversion• Choose OSBB if you have a 68mm Road Conversion and installing the BB on a
2014 or earlier Specialized Road frame
PART#TP-3068 68mm PF30 SLEEVETP-3073 73mm PF30 SLEEVETP-3002 68mm OSBB SLEEVE (2014 or earlier Specialized Road frame)
CONV BB - O-RING (single)• Replacement width tolerance O-Ring for Non-Drive side of your original BB• Must be installed on the Non-Drive side cup• For the Non-Drive cup to compensate for frame shell width discrepancies
PART#CONV BB O-RING
SHIMANO SEAL KIT• Replacement pair of seals for our Praxis BB’s for Shimano cranks.• Used on BSA , T47 and Conversion BB for Shimano. • Pair of Orange Seals
PART#TP-3001 SHIMANO SEAL KIT
SPARE PARTS / TOOLS
CHAINRING BOLTS - ROAD • Praxis road chainring bolts - Black• Aluminum | 5 & 6mm Allen | Torque to 10Nm • M8.5 x 0.75 spec
PART#TP-0001
M24/GXP SEAL KIT• Replacement seal kit for our Praxis M24 bottom brackets.• Pair of seals and wave washer
PART#TP-3003 M24/GXP SEAL KIT
M30 BB DUST COVER KIT• Replacement alloy dust covers/spacers for Praxis M30/M30 THRU BB’s.• Kit includes all covers/parts for all versions M30 & M30 THRU
PART#TP-3030 M30 DUST COVERS KIT
104 or 94BCD
Direct Mount
Direct Mount
NDS COVER(28m
m ID
)BB M
odel(Praxis Part N
umber)
DS COVER
(30mm
ID)
2mm
C-Clip Dust Cover
M30 68/73m
m BSA
(68-0201B)
2mm
Dust Cover+
Wave W
asher
2mm
C-ClipDust Cover
M30 68/73m
m T47
(47-0000)
2mm
Dust Cover+
Wave W
asher
2mm
C-Clip Dust Cover
M30 73m
m P
F30/BB30(73-4001R)
2mm
Dust Cover+
Wave W
asher
2mm
Dust CoverM
30 BB92(86-4001B)
2mm
Dust Cover+
Wave W
asher
2mm
Dust CoverM
30 BB90(86-4001B)
5mm
Dust Cover+
Wave W
asher
NDS CO
VER(28m
m ID
)BB M
odel(Praxis Part N
umber)
DS COVER
(30mm
ID)
2mm
C-ClipDust Cover
M30 68/73m
m BSA
(68-0201B)
1mm
Dust Cover+
Wave W
asher
2mm
C-ClipDust Cover
M30 68/73m
m T47
(47-0000)
1mm
Dust Cover+
Wave W
asher
2mm
C-ClipDust Cover
M30 73m
m P
F30/BB30(73-4001R)
1mm
Dust Cover+
Wave W
asher
2mm
Dust CoverM
30 BB92(86-4001B)
1mm
Dust Cover+
Wave W
asher
2mm
Dust CoverM
30 BB90(86-4001B)
2mm
Dust Cover+
Wave W
asher
NDS CO
VER(30m
m ID
)BB M
odel(Praxis Part N
umber)
DS COVER
(30mm
ID)
Crank Preload Ring acts as Dust Cover
M30 TH
RU 68/73m
m BSA
(68-4201)2m
m Dust Cover
M30 TH
RU 68/73m
m T47
(47-0001)2m
m Dust Cover
M30 TH
RU 73m
m P
F30/BB30(73-4101R)
2mm
Dust Cover
M30 TH
RU BB92
(86-4201)1m
m Dust Cover
2mm
Dust Cover+
Preload RingM
30 THRU
BB90(86-4201)
2mm
Dust Cover
M30 M
TB DIRECT MO
UNT
Models - CADET DM
/ GIRDER DM
/ GIRDER CARBO
NM
30 MTB
Models - CADET / G
IRDERM
30 THRU M
TBM
odels - LYFT/LYFT HD
Praxis W
orks, LLC 207 M
CP
HERSO
N ST. SU
ITE E. SAN
TA C
RUZ, C
A 95060 w
ww
.praxis-works.com
DUST COVER SETUP CHART
110 or 130BCD
Direct Mount
NDS CO
VER(2
8m
m ID
)
BB Model
(Praxis Part Num
ber)DS CO
VER (3
0m
m ID
)
2mm
C-ClipDust Cover
M3
0 6
8m
m B
SA
(68
-02
01
B)
1mm
Dust Cover+
Wave W
asher
2mm
C-ClipDust Cover
M3
0 6
8/7
3m
m T
47
(47
-00
00
)
1mm
Dust Cover+
Wave W
asher
2mm
C-ClipDust Cover
M3
0 6
8m
m P
F3
0/B
B3
0(6
8-4
00
1R
)
1mm
Dust Cover+
Wave W
asher
2mm
C-ClipDust Cover
M3
0 B
BR
igh
t(7
9-4
00
1)
1mm
Dust Cover+
Wave W
asher
2mm
Dust CoverM
30
BB
86
(86
-40
01
B)
1mm
Dust Cover+
Wave W
asher
2mm
C-ClipDust Cover
M3
0 3
86
EV
O(8
6-6
00
1)
1mm
Dust Cover+
Wave W
asher
NDS CO
VER(2
8m
m ID
)
BB Model
(Praxis Part Num
ber)DS CO
VER(3
0m
m ID
)
2mm
C-ClipDust Cover
M3
0 6
8m
m B
SA
(68
-02
01
B)
2mm
Dust Cover+
Wave W
asher
2mm
C-ClipDust Cover
M3
0 6
8/7
3m
m T
47
(47
-00
00
)
2mm
Dust Cover+
Wave W
asher
2mm
C-ClipDust Cover
M3
0 6
8m
m P
F3
0/B
B3
0(6
8-4
00
1R
)
2mm
Dust Cover+
Wave W
asher
2mm
C-ClipDust Cover
M3
0 B
BR
igh
t(7
9-4
00
1)
2mm
Dust Cover+
Wave W
asher
2mm
Dust CoverM
30
BB
86
(86
-40
01
B)
2mm
Dust Cover+
Wave W
asher
2mm
C-ClipDust Cover
M3
0 3
86
EV
O(8
6-6
00
1)
2mm
Dust Cover+
Wave W
asher
M30 RO
AD DIRECT MO
UNT
Models - ALBA DM
/ ZAYANTE DM
/ ZAYANTE CARBO
NM
30 ROAD
Models - ALBA / ZAYAN
TE
Pra
xis
Wo
rks
, LL
C 2
07
MC
PH
ER
SO
N S
T. S
UIT
E E
. SA
NT
A C
RU
Z, C
A 9
50
60
ww
w.p
raxis
-wo
rks
.co
m
DUST COVER SETUP CHART
(79-4001R)
(79-4001R)
104 or 94BCD
Direct Mount
NDS CO
VER(22m
m ID)
BB Model
(Praxis Part Num
ber)DS CO
VER(24m
m ID)
1.7mm
C-Clip Cover
M24 68/73m
m BSA
(68-0301)3.7m
m Cover
+ Wave W
asher
1.7mm
C-Clip Cover
M24 73m
m PF30/BB30
(73-4001R)3.7m
m Cover
+ Wave W
asher
1.7mm
C-Clip Cover
M24 BB90(86-0301)
6.8mm
Cover+ W
ave Washer
1.7mm
C-Clip Cover
M24 BB92(86-0301)
3.7mm
Cover+ W
ave Washer
NDS CO
VER(22m
m ID)
BB Model
(Praxis Part Num
ber)DS CO
VER(24m
m ID)
1.7mm
C-Clip Cover
M24 68/73m
m BSA
(68-0301)2.0m
m Cover
+ Wave W
asher
1.7mm
C-Clip Cover
M24 73m
m PF30/BB30
(73-4001R)2.0m
m Cover
+ Wave W
asher
1.7mm
C-Clip Cover
M24 BB90(86-0301)
3.7mm
Cover+ W
ave Washer
1.7mm
C-Clip Cover
M24 BB92(86-0301)
2.0mm
Cover+ W
ave Washer
M24 M
TB DIRECT MO
UNT
Models - CADET DM
/ GIRDER DM
M24 M
TBM
odels - CADET
Praxis Works, LLC 207 M
CPHERSO
N ST. SUITE E. SAN
TA CRUZ, CA 95060 ww
w.praxis-w
orks.com
DUST COVER SETUP CHART
(73-3201R)
(73-3201R)
Direct Mount
110 or 130BCD
NDS CO
VER(2
8m
m ID
)
BB Model
(Praxis Part Num
ber)DS CO
VER (3
0m
m ID
)
2mm
C-ClipDust Cover
M2
4 6
8m
m B
SA
(6
8-0
30
1)
2.0mm
Cover+
Wave W
asher
2mm
C-ClipDust Cover
M2
4 6
8m
m P
F3
0/B
B3
0
(6
8-3
20
1)
2.0mm
Cover+
Wave W
asher
2mm
Dust CoverM
24
BB
86
(8
6-0
30
1)
2.0mm
Cover+
Wave W
asher
NDS CO
VER(2
8m
m ID
)
BB Model
(Praxis Part Num
ber)DS CO
VER(3
0m
m ID
)
1.7mm
C-Clip Cover
M2
4 6
8m
m B
SA
(6
8-0
30
1)
2.0mm
Cover+
Wave W
asher
1.7mm
C-Clip Cover
M2
4 6
8m
m P
F3
0/B
B3
0
(6
8-3
20
1)
2.0mm
Cover+
Wave W
asher
1.7mm
C-Clip Cover
M2
4 B
B8
6
(8
6-0
30
1)
2.0mm
Cover+
Wave W
asher
M24 RO
AD DIRECT MO
UNT
Models - ALBA DM
M24 RO
ADM
odels - ALBA / ZAYANTE
Pra
xis
Wo
rk
s, L
LC
20
7 M
CP
HE
RS
ON
ST. S
UIT
E E
. SA
NT
A C
RU
Z, C
A 9
50
60
ww
w.p
raxis
-wo
rk
s.c
om
DUST COVER SETUP CH
ART
(68-3201R)
(68-3201R)
BB/Frame Standard
PR
AXIS M
30P
RA
XIS M30 TH
RU
PR
AXIS M
24/ SRA
M G
XP™P
raxis Road
Praxis M
TNP
raxis Road
Praxis M
TNP
raxis Road
Praxis M
TN
BB30
68mm
RoadM
30 68mm
PF30/B
B30
(68-4001R)M
24 68mm
PF30/B
B30
(68-3201R)
73mm
MTN
M30 73m
m P
F30/BB
30(73-4001R)
M30 TH
RU
73mm
PF30/B
B30
(73-4101R)M
24 73mm
PF30/B
B30
(73-3201R)
PF30
68mm
RoadM
30 68mm
PF30/B
B30
(68-4001R)M
24 68mm
PF30/B
B30
(68-3201R)
73mm
MTN
M30 73m
m P
F30/BB
30(73-4001R)
M30 TH
RU
73mm
PF30/B
B30
(73-4101R)M
24 73mm
PF30/B
B30
(73-3201R)
Older O
SBBSpecialized Road 2014 and older
61.5
30.75
M30 68m
m P
F30/BB
30(68-4001R) + TP-3002
M24 68m
m P
F30/BB
30(68-3201R) + TP-3002
BSA
68 or 73 Centered
M30 68/73m
m B
SA(68-0201B)
M30 68/73m
m B
SA(68-0201B)
M30 TH
RU
68/73mm
BSA
(68-4201)M
30 THR
U 68/73m
m B
SA(68-4201)
M24 68/73m
m B
SA(68-0301)
M24 68/73m
m B
SA(68-0301)
BB86 (Road)
86.5
M30 B
B86/90/92
(86-4001B)M
30 THR
U B
B86/90/92
(86-4201)M
24 BB
86/90/92(86-0301)
BB90 (M
TN)
M30 B
B86/90/92
(86-4001B)M
30 THR
U B
B86/90/92
(86-4201)M
24 BB
86/90/92(86-0301)
BB92 (M
TN)
M30 B
B86/90/92
(86-4001B)M
30 THR
U B
B86/90/92
(86-4201)M
24 BB
86/90/92(86-0301)
386 EVOM
30 386EVO
(86-6001)
T47(External Bearing)
68 or 73 Centered
M47 x 1.0 Threaded
M30 68/73m
m T47
(47-0000)M
30 68/73mm
T47(47-0000)
BBRightM
30 BB
Right
(79-4001R)
Praxis BB Compatibility Guide
46
Apr 2018Rev C
PRAXIS M30 Spindle PRAXIS M30 THRU Spindle PRAXIS M24/SRAM GXP™ Spindle
28mm
LH
30mm
R
H
30mm
LH
30mm
R
H
22mm
LH
24mm
R
H
Drive Side (RH)
Spindle Diameter
Non-Drive Side (LH
) Spindle Diam
eter
Drive Side (RH)
Spindle Diameter
Non-Drive Side (LH
) Spindle Diam
eter
Drive Side (RH)
Spindle Diameter
Non-Drive Side (LH
) Spindle Diam
eter
BB Images are for reference only. Please see the BB instructions included w
ith your BB for your specific setup.
Praxis BB Compatibility Guide
Apr 2018Rev C
BB/Frame Standard
SRA
M G
XP™ CR
AN
KSR
AC
E FAC
E / EASTO
N / R
OTO
R C
RA
NKS
SHIM
AN
O C
RA
NKS
Road
MTN
Road
MTN
Road
MTN
BB30
68mm
RoadM
24 68mm
PF30/B
B30
(68-3201R)Shim
ano 68mm
PF30/B
B30
(68-3001R)
73mm
MTN
M24 73m
m P
F30/BB
30(73-3201R)
M30 TH
RU
73mm
PF30/B
B30
(73-4101R)Shim
ano 73mm
PF30/B
B30
(73-3001R)
PF30
68mm
RoadM
24 68mm
PF30/B
B30
(68-3201R)Shim
ano 68mm
PF30/B
B30
(68-3001R)
73mm
MTN
M24 73m
m P
F30/BB
30(73-3201R)
M30 TH
RU
73mm
PF30/B
B30
(73-4101R)Shim
ano 73mm
PF30/B
B30
(73-3001R)
Older O
SBBSpecialized Road 2014 and older
61.5
30.75
M24 68m
m P
F30/BB
30(68-3201R) + TP-3002
Shimano 68m
m P
F30/BB
30(68-3001R) + TP-3002
BSA
68 or 73 Centered
M24 68/73m
m B
SA(68-0301)
M24 68/73m
m B
SA(68-0301)
M30 TH
RU
68/73mm
BSA
(68-4201)M
30 THR
U 68/73m
m B
SA(68-4201)
Shimano R
oad 68mm
BSA
(68-0001)Shim
ano MTN
68/73mm
BSA
(73-0002)
BB86 (Road)
86.5
M24 B
B86/90/92
(86-0301)M
30 THR
U B
B86/90/92
(86-4201)
BB90 (M
TN)
M24 B
B86/90/92
(86-0301)M
30 THR
U B
B86/90/92
(86-4201)
BB92 (M
TN)
M24 B
B86/90/92
(86-0301)M
30 THR
U B
B86/90/92
(86-4201)
T47(External Bearing)
68 or 73 Centered
M47 x 1.0 Threaded
Shimano 68/73m
m T47
(47-3001)Shim
ano 68/73mm
T47(47-3001)
BB Images are for reference only. Please see the BB instructions included w
ith your BB for your specific setup.
DM
R C
ranksDM
R Cranks use a pro-prietary version of the
M30 BB that is available
through DMR
OVA
L C
onceptsO
VAL Concepts cranks use the Praxis M
24 or M
30 BB system
BO
XBO
X uses Praxis M30
and BOX M
35 BBs. Please contact BO
X di-rectly for a replacem
ent M
35 BB.
INFO
CR
AN
KInfocrank Cranks from
Verve utilize the Praxis
M30 BB system
Cam
pagnoloCam
pagnolo “Ultra Torque” cranks use the the Praxis ULT-BB30/
PF30 BB
(68-3002R)
46
68
68
34
68
34
86.5
43.25
46
42 46
73
36.5
73
36.5
464246
73
39
73
36.5
92
44.75
41 41 41
89.5
44.75
86.5
43.25
79
45
46
34
BS
A Threads
BS
A Threads
Road 68mm
BSA
Road 68mm
PF30
Road 68mm
BB30
Road 386EVO
68
68
34
68
34
86.5
43.25
46
42 46
73
36.5
73
36.5
464246
73
39
73
36.5
92
44.75
41 41 41
89.5
44.75
86.5
43.25
79
45
46
34
BS
A Threads
BS
A Threads
MTN
73mm
BSA
MTN
73mm
PF30
MTN
73mm
BB30
68
68
34
68
34
86.5
43.25
46
42 46
73
36.5
73
36.5
464246
73
39
73
36.5
92
44.75
41 41 41
89.5
44.75
86.5
43.25
79
45
46
34
BS
A Threads
BS
A Threads
Road BB86
MTN
BB90
MTN
BB92
Road BBRight
Praxis BB Standards Guide
Apr 2018Rev C
68
68
34
68
34
86.5
43.25
46
42 46
73
36.5
73
36.5
464246
73
39
73
36.5
92
44.75
41 41 41
89.5
44.75
86.5
43.25
79
45
46
34
BS
A Threads
BS
A Threads
T47 68/73mm
68 or 73mm
Centered
M47x1.0m
m Threaded
BB30/PF30 VIP NOTES
e-WIRING NOTES
* YOU MUST VISUALLY INSPECT YOUR BB30/PF30 FRAME FOR OBSTRUCTIONS *
• BB30 frames must have removable C-clips for Conversion BB to be able to press in. • Frame shell cannot have any inner shell obstructions that prevent BB from installing. • DO NOT Modify! If you are unsure of your specific frame shell, please contact your frame manufacturer.
EXAMPLE OF POTENTIAL OBSTRUCTIONS... These will prevent Praxis unit from being installed.
Non-Removable Machined “lip” Non-Removable
Carbon “lip”
Cable guidepoking up through
CHAIN RING INSTALLATIONThe Praxis Works chain rings are matched sets and smooth shifting will not be possible if the chain rings are incorrectly installed. Be sure to install the chain rings in the correct positions as the graphics above show.
www.praxis-works.com
CROSS GEARING SMALL/SMALLWhen the chain is in the position shown at the right, the chain may contact the front chain rings or front derailleur and make noise. If the noise is a problem, shift the chain onto the next-larger rear sprocket or the one after.
CROSS GEARING
CHAIN RING INSTALLATION GUIDE
TRADITIONAL 5-ARM MOUNT 4-ARM PRAXIS X-SPIDER(X Rings Only)
4-ARM WITH HIDDEN 5TH MOUNT(Buzz Rings Only)(Clover and Buzz Rings)
B I C Y C L E C O M P O N E N T S
PRAXIS “D
M-A
an
d D
M-B
” MTN
RING
CHAIN
LINE G
UIDE
CENTERLINE
TE
CH
GU
IDE
INSTALLED O
N A PRAXIS M
TN CRAN
K
“DM-A” RIN
G = 49m
m N
ON
-BOO
ST
49mm
52mm
CENTERLINE
CENTERLINE
INSTALLED O
N A
SRAM “LO
NG
” SPINDLE M
TN CRAN
K
“DM-A” RIN
G = 52m
m B
OO
ST
CENTERLINE
52mm
INSTALLED O
N A
SRAM “SH
ORT” SPIN
DLE MTN
CRANK
“DM-B” RIN
G = 49m
m “
NO
N-B
OO
ST
”
No
te -
Do
NO
T in
sta
ll DM
-A
ring
on
sh
ort
sp
ind
le S
RA
M c
ran
ks
.
49mm
SRAM - REFEREN
CE PHO
TOCheck your crank spindle as SRAM
has different length versions
S R A M
SRAM
SHO
RT SPIND
LESRAM
LO
NG
SPIND
LE
INSTALLED O
N A PRAXIS M
TN CRAN
K
“DM-B” RIN
G = 52m
m BO
OST
REV A.M
TN D
IRECT MO
UN
T RING
S