Dear Customer:
Thanks for purchasing our products. Before starting to use this product,
please be sure to read this manual carefully so that you will know how to
use the product better and a number of notices. Please keep this manual for
future reference.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Table of Contents
Introduction of product
Notices……………………………………………………………….2
Features………………………………………………………………3
Accessories…………………………………………………………..4
Appearance…………………………………………………………..5
Hard Disk format and Installation……………………………………6
Import multi-media files and other files
Connect to the computer……………………………………………14
As DVD player
DVR Settings…………………………………………………………16
Remote controller keys………………………………………………….17
Remote controller operation illustration………………………………...20
Set time operation illustration
Memory card operation illustration
DVR operation………………………………………………………..21
Specification………………………………………………………….28
Trouble shootings…………………………………………………….29
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Warning ◎ Do not disassemble the AC Adapter, and contact certified maintenance technicians if repair is
required.
◎ Keep off fluid or inflammable substances.
◎ Unplug the AC adapter if you are not using the device to reduce power consumption and assure
safety.
◎ please keep away from flammability.
◎ The battery in the remote controller is consumable. When replacing the battery make sure that
the new one is of the same type, and disposes the used battery with caution.
◎ The memory card can only be inserted one way, forcing it may damage the DVR or card.
◎ Avoid shock or damage to the device
◎ It is normal that the surfaces become hot when using as a player, but do not cover anything over
the device.
◎ Before unplugging power you should stop playing first, then use the POWER button to enter
standby mode(the power LED turns red).Don’t unplug power while playing, it will do harm to
HDD.
◎ Usually, the indicator light will glint when the power for the Hard Disk is turned on or off,
indicating the user has to wait. Pease do not perform any other operation until the light goes off.
◎ When using the products as storage device, it supports both FAT and NTFS format. But when
using as HDD player, file systems should be FAT format (can’t be NTFS format)in primary
disk-partition(there should be no extended partitions).
◎ When connected to the computer as a storage device, many separated files will be produced.
This may affect the playing of video. The user can use different partitions of the disk to separate
storage and video playing functions.
◎ Backup your data in HDD, we make no warranties with respect to data and hardware.
◎ The device has been tested widely, such as the computer hardware and OS, HDD type, camera,
card reader, Media file format, and so on. But we don’t assure that it is compatible with all kinds
of situation.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Features ◆ Powerful video recorder with timing. Use ARM9 and DSP technology, records into MPEG4
format(D1 quality,720*576 pixels), you won't miss your favorite programs anymore
◆ Powerful “All Formats” playing function, support all popular media format.
RM, RMVB 8,9,10 (1280*720)
MPEG-1 (AVI, MPG, DAT, ASF)
MPEG-2 (AVI, VOB, ASF, MPG)
MPEG-4 (AVI, ASF, XviD, MP4)
● Supports Audio Files Formats:
MP2/MP3/WAV/AAC
● Supports JPG images and motion JPG.
◆ Support Internal/External subtitles(.SUB/.SRT),including Traditional/Simplified Chinese and
English.
Rich interface, Colorful life
◆ Supports new 2.5 inch High-Speed SATA hard disk, format hard disk with DVR.
◆ Support mass storage equipment such as SD、MMC Card.
◆ USB2.0 High speed up to 480Mbit/s transferrate, compliant with USB1.1.
◆ Video input supports NTSC/PAL, powerful video decoder, higher color recover, European.
◆ Video output supports NTSC/PAL, and can be changed between interlaced and progressive.
Smart Power Saving System, More economically, More stable, More expediently.
◆ Speed-Step Tech., auto adjust CPU frequency, makes the system more economically, more
stable.
◆ Hard Disk power saving and protection, HDD switches to Standby mode when idle to entend
the life of the hard disk
◆ Option to use independently without external power source, for enhanced portability and
convenience
Humanized design, makes the user more satisfying
◆ Auto recovering record files when space low, mark record files with time& date.
◆ Real-time-controller when power off.
◆ Unique “Media library” function helps user to choose “pictures”, “music”, “movies” directly,
giving users better searching and enjoying of the files.
◆ Support break mark, makes you continue the film from shut down position.
◆ Supports document managing which include the operations such as copy, paste, delete, create
new folder, copy all and delete all.
◆Customer can update the firmware expediently to acquire the latest function at any time.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Accessories
1. Remote control(battery included)
2. USB Cable
3. AV Cable(two pieces)
4. AC Adapter
5. Screwdriver
6. Screws
7. User Manual(With Drive Disk)
8. Warranty Terms& Conditions
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Appearance
﹡Main Body
﹡Side view 1
1. AV in 2.AV out 3.USB port 4.Power connect
﹡Side view 2
1. Rec./Err LED 2.HDD LED 3.SD/MMC LED
4. Power LED 5.Infrared sensor for the remote control
﹡Side view 3
1. On the right of DVR,have a SD card port.
2. Supports SD/MMC card.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Hard disk format and installation
<Formatting the HDD>
1. Switch on BR2008 power.
2. A suggestive message will display if the HD was not formatted, “HD didn’t format, do you want to format”.
3. Click “ENTER” and select “YES”, then begin formatting HDD,If not will exit operation.
(Note : Formatted HDD didn’t suggest format operation)
﹡Formatting on a PC(Win2000/xp)
Format your DVR using FAT32(max file size limited to 32GB).
Formatting on a Mac(OS X)
Format your DVR using MS-DOS File System and support the maximum of 4 separate partitions.
<HDD Installation>
1.Remove screws from right and left side of the DVR.
2.Remove the rear cover and baffle plate
3.Remove the two screws on the mainboard.
Remove
the two
screws
Remove
the two
screws
baffle plate rear cover
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
4.Take out the mainboard and install the HDD. Fix it with screws.
5. Put the mainboard into the outer cover and fix it with two set screws and the panel after the HDD has been
installed properly.
6.Close the rear cover and fix with four screws.
Put the HDD into power receptacle
properly
Lock the HDD with
fix screw
Remove the two screws
Lock the screws
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Import media files and other files
<Connect to the computer>
Switch on your computer and start the operating system, install the USB driver software if you are using
WINDOWS98. For details please go to <Installation of the USB driver software under Saving Mode>.
● Supply power for device(as below):
1. Plug the adaptor into the power receptacle on the DVR. This applies to HDD's all sizes.
(Ensure that the USB cable is NOT connected to the computer before power is supplied to the product through
the AC adaptor. Otherwise the product will use power supplied through the USB instead through the AC
adaptor.
2. Supply power for the device through single USB port on the computer (not through AC adapter). The capacity
of power supply in this way is relatively low, which is not recommended unless the memory capacity of the
Hard Disk of the product is less than 20G.
3. Supply power for the device through TWO USB ports on the computer .This way will be recommended if the
capacity of the Hard Disk of the product is less than 40G.
Lock
the
screws
Lock
the
screws
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
● The device will be found and detected automatically by the computer to which it has been connected through a
USB cable and related setup program (e.g. disk number) will be run. Then the device can be used as a
peripheral storage device of the computer.
● Install USB driver.
◆WINME, WIN2000,WIN XP OS:
You can use the default USB driver from OS, and no installation is needed.
◆ WIN98 OS:
Insert the driver disc and execute:X:\win98\setup.exe.The letter “X” represents the driver letter.
● Remove the USB hardware secure.
◆ Click the plug and play icon on taskbar of computer to stop USB setting follow the prompt.
◆Disconnect USB cable from computer side or DVR side.( After disconnecting the USB cable with computer, the
DVR into sleeping mode if supplied the power through AC adapter, then the power of HDD will be shut
down.).
DVR Setting
﹡Connected with TV
Note: The three terminals (with three different colors) of the AV cable should be matched with the corresponding
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
input jacks on you TV,
Connected with other video output equipment.
(For example DV or DVD)
For TV programs recording, connections between TV and DVR shown as below:
Note: Connect the output of the TV to the input of BR2008;connect the output of BR2008 to the input of TV.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Remote Controller keys
﹡Panel illustration:
1. CLEAR:Hide or show the information of the screen.
2. L/R:Change the track to left or right or stereo.
3. P/N: Change the display signal mode to PAL or NTFS.
4. POWER:Enter or exit standby state.
5. ZOOM:Zoom photos.
6. ROTATE:Rotate photos.
7. THUMB:Enter the photo thumbnail digest.
8. SLIDE:Enter Music/photo-slide-show mode.
9. Record the movie:press this key can enter record mode directly.
10. Equalizer:Open music equalizer.
11. EFFECT:Selection of specially effect.
12. INTERVAL:Select slide show(include music-slide-show)
13. MENU:Function setup.
14. Info:Display the file information.
15. EXIT:Press the button to show MAIN MENU.
16. Caption adjusting:adjust caption.
17. “ ”DIRECTION:Move cursor or move the photo in the zoom mode.
18. “ ” DIRECTION:Move cursor or move the photo in the zoom mode.
19. ENTER/PLAY:Confirm selection.
20. “ ” DIRECTION:Move cursor or move the photo in the zoom mode.
21. “ ” DIRECTION:Move cursor or move the photo in the zoom mode.
22. BROWSER:Return to root directory.
23. VOLUME+:Increase volume(0-30).
24. VOLUME-:Decrease volume(0-30).
25. PREV:Switch to previous file or turn page up.
26. PAUSE:While playing, press the button to pause playing.
27. NEXT:Switch to next file or turn page down.
28. MUTE:Mute or cancel mute.
29. FR:Play reverses fast(1-4)
30. STOP:Stop playing and back to the directory.
31. FF:Play forward fast(1-4)
32. REPEAT:Select repeat mode.
33. Shortcut key for picture base:one-key access picture base.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
34. Shortcut key for music base:one-key access music base.
35. Shortcut key for film base:one-key access film base.
36. Shortcut key for browse:one-key access browse picture.
﹡Note:
◆ IR is remote receive ◆ To use a remote controller, the transmitter window should face to the receiver panel on the product. The
transmitted angle is 60 degree and distance should be less than 5 meters.
◆ Do not drop or damp the remote controller.
◆ Keep the remote receive away from sources of direct sunlight when working.
◆ When the battery in remote controller is low ,you can replacing the new one in time.
﹡Change the battery in remote control(as below)
◆ Using your thumb sticks on the side of battery cover(Fig., 1), and push on right side. In the mean time, using
your index finger sticks on the top of battery cover (Fig., 2), and pull out the battery cover.
◆ According to the indication, put the (+) of the battery into the slot .Make sure that the battery is facing up.
◆ Insert the outer cover of battery back to the remote control.
Remote controller and machine operation illustration
[Getting started]
● The power indicator light will be on after the DVR is turned on for over 1 second., press key for over 3
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
seconds, then the DVR will be switched on..
● Please pull out the insulated film in the bottom of the remote when using the remote for the first time.
● One movement later, media menu will be shown on the screen.
● Press“ ” “ ” “ ” “ ”to move cursor, and use “ENTER” button to confirm selection(enters media
library, enters file folder, or starts playing files).
● Press BROWSER button return to the root directory.
● Press“ ”button return to the parent directory.
● Press“■” button to stop playing.
● Press button to enter or exit from standby states.
● Disconnect the device from power if no use for a long time.
<Turning on operation illustration>
The power indicator light will be glint after the BR2008 is turned on for 1 second, ,press
key for 3 seconds then the RB2008 will be switched on.
﹤Set time operation illustration﹥
﹤Operation illustration﹥
1)At the main menu,click “MENU” to select “clock”. Click“ ”、“ ” 、“ ”、 “ ”on the remote
controller to adjust “year”, “month”, “day”, “ hour”, “ minute”.
﹤Memory card operation illustration﹥
Card reader operation:
1. Plug SD/MMC card into the slot。
2. Click on the “document manager” icon in the main menu, you will get the root directory list and add to display
(SD/MMC card)。
Note: Do not pull and push the card when the file is reading.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
DVR Use Explain
1.Main menu
1.1 Main menu
After turning on the DVR, you will see the main menu:
1.2 Operation illustration
1.2.1 Selection Function
1) User can select the function icon with “ ”、“ ” 、“ ” 、“ ” key on the remote controller
in the Main menu.
2) After that,press “ENTER” and get into the corresponding unit.
3)Users can press “IMAGE”, ”MUSIC”, ”MOVIE”, or ”PREVIEW” key to access the relevant function.
For example, to press “IMAGE” key, system will show out all pictures on the screen. User can select
relevant picture directly, then press “ENTER” key to confirm.
1.2.2 Setting menu
1. Press “MENU” on the remote controller key, then press the “ ”、“ ” to select, after that press
“ENTER” key to confirm.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
1.2.3 Setting introduction
Basic operation:Press“ ”、“ ” to select,press“ ”、“ ”to change settings, press “EXIT” to return to the
main menu.
Display:On this interface, you can set Language, TV standard, Scan Mode.
System:On this interface, can set Show All File, Media Browse Mode, Update Firmware, Firmware Version.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Option:On this interface, you can set Active BK、Equalizer、Slide interval.
Clock: On this interface, can set DVR current “year” 、“month” 、“date” 、“hour” 、“minute”.
Scheduler:On this interface,you set record with time. Press “ENTER” to confirm after settings operation.
2.Document Manager Menu
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
2.1 Operation illustration
On the main menu, select image, film, music and document manager, you will see the document manager
menu.
1、“/C” express under the root directory of the first partition.
2、“1/80” indicates that there are 80 files under this directory, with the first file highlighted.
2.1.1 Document display illustration:
1)On the main menu,press “MENU” key, you can see the menu, select “system” item.
2)You can select "directory mode" or "media library mode" to browse the media.
To select directory mode, click a movie file, a picture file, or a music file, then the selected file will be
classified and listed.
To select media browse mode, click a movie file, a picture file, or a music file, then the selected file will be
listed based on its postfix.
Note:
Supporting track exchanging file format (.VOB).
Supporting all movie files with subtitle exchanging (.subit )
2.2 File type
Document manager shows the different icons for different file types, as below.
Parent directory
Directory
Picture
Movie
Music
Unsupported file
2.1.2 Read document operation:
1)Users can select the document by“ ”、“ ” on the Document manager menu.
2)Press “ENTER” to open the documents(enter the corresponding function)or get into the lists.
3)Press “EXIT” can go back to the main menu from the Document manager menu.
4)Press “BROWSER” can return to the root directory.
5)Press“ ”return to the parent directory.
2.1.3 Create or delete Document folders operation
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Create dir:
1)Select the appointed document list,then press the “MENU”, you can see the menu, select “create dir”,
press “ENTER” to create a new file.
2)The “DIR_XXX” is the serial number which increates automatically of the saving file.
Delete file: select the appointed document, then press the “MENU”, you can see the menu, select “delete”,
choose to operate according to instruction.
2.1.4 Copy or paste files operation:
Select the appointed file, the press the “MENU”,select “copy”, pressing “ENTER”. Open any other file,
pressing “MENU”,the select “paste”,pressing “ENTER”, you can copy the appointed file to any other
document.
2.1.5 All copy or delete document operation:
1)Choose the appointed the document, then pressing the “MENU”,select “all copy”, press “ENTER”,you
can total copy this document to any other document.
2)Select the appointed document,then press the “MENU”,select “all delete”, choose to operate according
to instruction.
3.Viewing photos menu
When user choose the picture in document manager, then press “confirm” key into viewing single photo
menu.
3.1 Viewing single photos menu
Operation illustration:
1) Press“ ”、“ ”can change the picture to the front one or the next one.
2) Press “THUMB” can get into the 3X3 browse menu.
3) Press “EXIT” can go back to the document manager menu.
4) Press “ROTATE” can clockwise rotate the photograph.
5) Press “ZOOM” can enter the picture zoomed menu.
6) Press “SLIDE” can go into the slide mode.
7) Press “EFFECT” can select the picture effect.
8) Press “INTERVAL” can set the slide interval of the picture.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
9) Press “INFO” can show or close the picture information.
10) Press “MENU” can show the menu, as below:
3.2 3X3 browse menu
On the single photo browse menu,when press“THUMB”to enter 3X3 browse menu:
1. The left-top icon is the file name of the selected picture in the green panel.
2. The right top is the icon of the 1st page of the 16 icon pages(each page <= 9 pictures)
3. The selected picture file is under the green panel which is a 3.3x3 icon, Press "play" key to enter full window
mode.
Operation Illustration:
1) You can move cursor by using“ ”、“ ”,and then choose pictures that you wanted.
2) User “THUMB” key can change into one browser menu, and then the picture you choose will be
displayed alone.
3) Press “INFO” can show or close the information of the appointed picture on the screen.
4) Press “MENU” can show the function list, press “EXIT” come back to the parent menu.
3.3 Magnifying photos menu
Illustration: Press “ ”“ ” to select function in the menu, then press
confirm key to run
Picture info (1) “Picture info.” will display picture info on TV, or press “INFO”.
Slide play (2) “Slide play” will play the picture automatically according to the fix interval.
Or press “SLIDE” key.
Special effects (3) “Special effects” can show the special effects of the picture, or press
“EFFECT” key.
Setting (4) “Display setting” can set the display options
3X3 browse (5) Press “EXIT” to exit the menu.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Operation Illustration:
1)On the single photo browse menu,press “ZOOM” get into the picture zoomed menu(2X),pressing
“ZOOM” again, enter the picture zoomed menu(4X).
2) Use“ ”、“ ” 、“ ”、“ ”you can look over pictures.
3) The pane on the right bottom is sketch , green area is the current view.
4)Use the “EXIT“ to return to an unmagnified view.
3.4 Rotate photo
Press “ROTATE”, you can rotate the picture by 90 degrees.
3.5 Slide view
Note: Press “SLIDE”, can show the slides. Press “INTERVAL” can select the interval for playing the slide within
2-8 seconds.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
4.Play video menu
After selecting the “MOVIE” icon and pressing “ENTER”, the users will go to the play video menu:
Operating illustration:
1) Use “VOL+/VOL-” to adjust volume(0-30).
2) Use “EXIT” to return to the document manager menu.
3) Use“ ” 、“ ” 、“■”to play, pause, stop.
4) Use“ ”、“ ”to see front or next film.
5) Use“◄◄”、“►►”to execute play reverses or forward fast.
6) Use “SUBTI.” to change the subtitle.
7) Use “EQ” to change the trace(.VOB file)。
8) Use “INFO” to close or show film information.
9) Use “CLEAR” to close or show the controlled information.
10) Press “MENU” you can see the menu as follows:
Movie name
Volume
Time of played
Subtitle
Progress line
Total time
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Illustration:Select“ ”、“ ”to choose.
Pressing “enter” to confirm the function.
( 1)“movie info”can display the movie information
( 2)“switch audio”can exchange the audio trace.
( 3)“switch subtitle”can exchange the movie subtitle.
( 4)“play info on/off”can display the control information
5.Play Music Menu
5.1 After selecting the MP3 and AAC document and pressing confirm key, the users will arrive at the Music
broadcasting menu:
Operating illustration:
1)Use “VOL+/VOL-”to adjust volume.
2)Use “EXIT” to return to the Document manager menu.
3)Use“ ” 、“ ” 、“■”,to play, pause, stop.
4)Use“ ”、“ ”to play front or next music.
5)Use“◄◄”、“►►”to play reverses or forward fast.
6)Use“ ”to select: normal, repeat, all repeat.
7)Use “EQ” to select Equalizer.
8) Use “INFO” to close or show music information.
9)Use “CLEAR” to close or show the controlled information.
10)Press “MENU” you can see the menu.
Play order
Volume(0-30)
Lyric
Total time
Progress line
Time of played
Movie info
Switch audio
Switch subtitle
Play info on/off
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
6.Recording video menu
6.1 Pre-recording video menu
If you want to record the DV or DVD video output equipment,you can take the connection as page 9.
6.2 When choosing the “record” and press the “ENTER” key at the main menu, then you could enter into the
record preview or on the main menu, press “REC.” to record directly.
Operation Illustration:
1) Press “MENU” to open the menu of the record parameter, where you can set the: to start record or not while
entering recording mode; recording quality; setup timer for recording; recording timer, etc.
2)Use the “REC” key to run the record,and enter into the record menu. Press“‖/‖ ”key to pause the
record ,press again can recover the record.
3) Use“■” to exit to preview menu.
< Operation illustration for Schedule recording>
1)Adjust the DVR time to the current time。
2)On the main menu,use “MENU” to select “Scheduler”, press “ENTER” to confirm,you will enter into the
schedule recording menu.
3)Press “Right” can select the schedule recording status, pressing“ ”can delete the selection.
4) Press“ ”、“ ”can change the status.
5 )Use “ENTER” to confirm the setting.
Note: On scheduler recording ,please select the standby but not turn off the power.
Time of recording
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Note: When use auto timer recording mode, others will be ignored.
6.1.2 Save
Those recorded movies will be saved under this directory, MOVIE/REC, in the first partition of the HD.
The file naming rule is yr_ month_ date_ time, e.g. "2008_3_13_10_30.AVI". System will use long naming
rule which adds hr_ min_ sec into original naming rule to identify recorded data in a minute.
6.1.3 Save
DVR can show the status with two LED during the recording:
(1) Rec. Indicator
(2) Err Indicator
Status Description:
Note:
1.If the hard disk is full during the recording, that will be show as follow” The disk is full! Press any key to
exit.”
2.If the saved file is larger than 2GB or more than 1 hour, on otter file will be created to continue recording.
6.2 For TV programs recoding, connecting TV and DVR shown below.
6.2.1 Operation illustration:
1. Users connect video I/O equipment as show on Page10.
2. Select cable input or other inputs on your TV, then play your recorded movie file or TV program.
3.Here is ready to record. You may just press the “REC” key; the record is running at that time. For the state
watch of the record, the record LED is the way. The record LED will be glint during the record with the
key “REC” pressed.
4.Press key “■”or “EXIT” to stop recording.
7、Updates Firmware
BR2008 can update firmware, operation illustration as follow:
1、 Change the name of the update firmware file to PMP.BIN。
2、 Copy this file to the root list.
3、 Hold the power button.
4、 On the main menu, then press “MENU”,you will see the menu as follow:
Record indicator Error indicator
Preview Always bright drown
Record star& running glint drown
Record error drown glint
Other state drown drown
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
5、 Select “system”,and get into the interface to update firmware.
6、 Select “update firmware”.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
7、 According to pointing out finishing progressively, upgrade movements.
8、 Restart the DVR after completing the update procedure.
Note:
When you update, do not shut off the power, if not will be destroyed the equipment.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Attachment 1:
Specification Power 100~240VAC,50 / 60HZ
Power consumption 6W(typical)
Dimensions 135*80*23(mm)
TV type PAL / NTSC
Frequency response ±3dB(20HZ~20KHZ)
Signal/Noise Ratio 85dB≧
Audio dynamic Range 87dB≧
Audio Cross Talk 85dB≧
Audio output 2.0±0.2V (r ms)
Video Output 1.0 ± 0.2Vp –p,75Ω
USB Date transfer Rate USB2. 0 ,MAX 480 M bit / s
File format supported
.AVI / .MPG / .MPEG / .DAT / .VOB / .WAV
/ .MP3 / .JPG /.AAC / .WMA
/ .ASF/.RM/.RMVB
HDD file supported FAT32in primary partition
Record rate(f /s) 25-30 fps
Record resolution 720 x 576
Image compress mode MPEG-4
Image size(capacity) Average 5KB (320 X 240)
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Attachment 2:
Problem Reason Solution
Power LED no light Do not supply power to the
device
Please use the power adapter to
supply power
The device was in standby
status
Please press button to wake up
it.
Make sure that you select
proper input source for AV
Connect the device with TV
correctly.
No video is displayed on TV
AV cable can’t touch good Connector AV cable again
AV cable can’t touch good Connector AV cable again
Input the amplify Turn on the amplify
No sound
Devices on static audio again , cancel static audio
The remote don’t work Fast speed status Without playing status.
Press SLIDE button, the system
halt
There are too many photos or
music in the HDD partition
No failure
Remote far away the IR Operate the remote in the scale
of IR
Remote far away the IR Use remote in 5 meters
Out of control of remote
Low battery Change the battery again
The machine can’t read some of
the disk
Hard disk parts not in all the
primary disk
Tidy primary disk and format
again.
The player doesn’t display the
hard disk files
The disk is not FAT type or no
files for playing
No failure
Many separate file in hard disk Recompose disk Hard disk unconventionally
during playing
Play incorrect file or separate
much files
Keep await order status, restar
await order status, don’t play
incorrect files, clean in
corrector files
USB equipment supply power
deficiently
Use double USB or extra power
supply
Computer can’t check the out
storage equipment
No USB driver under WIN98 Install USB driver
The power is not reliable or
interrupt accidentally
Make sure power reliable Record interrupt accidentally
Hard disk is full Clear the hard disk
The power of the DVR connects
weak or be cut off suddenly
Connect AV cable again
Video equipment can’t be
output incorrect
Check video output status
Sudden interrupt during the
record
Can’t preview when makes
records
No failure
Sudden interrupt during the
record
That is a bad file.That is not a
fault
There is some bad track Use the software to repair the
bad track
The record file can’t be display
The file will be supported, if it
can’t be displayed on PC
Update the software or change
to another one
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.