M23 Hybrid DMC Series™

Decentralized Motion Connector

Standard products. Custom solutions.

Power, Signal & Communication - ALL IN ONEDecentralized systems are a widely used method of controlling both signal and power transmission between servo motors, enabling a fully customizable system for your motion needs. With the addition of ethernet capabilities to our existing and successful M23 Series product line, creating the M23 Hybrid DMC Series, Amphenol Sine Systems has taken the next steps in hybrid evolution. The ergonomical circular design and compact size of our standard M23 Series, now combined with ethernet capabilities, provides significant space savings when compared to existing standard rectangular connectors on the market.

Our MotionGrade™ M23 Hybrid DMC Series, with its 2 Power + PE / 1 Signal (1.0mm) / 4 Quad Element Ethernet layout, is designed to excel in the most demanding decentrally-controlled, daisy-chained environments, specifically where Hybrid applications are necessary. Ideally suited for advanced servo-drive encoder feedback applications where POWER, SIGNAL and COMMUNICATION is required in a robust and compact delivery system.

APPLICATIONS I/O Connectors on Decentral Servo Motors • I/O ConnectorS on AC Servo Motors with PCB Drives (Amplifiers)

Packaging • Robotic • Printing • Machine Tool • Medical • Automation EnvironmentsAssembly • Food Production • Distributed Inverters

4 Quad Element Ethernet(Ø0.7mm)

2 Power(Ø2.0mm)

Receptacle Plug

2 Power(Ø2.0mm)

PE(Ø2.0mm)

1 Signal(Ø1.0mm)

1 Signal(Ø1.0mm)

800AC/DC Voltage / 17A

www.sineco.com

Connectors & Cables

M23 Hybrid, Plug, Male

M23 Hybrid, Plug, Female

M23 Hybrid, B, Receptacle, Male

M23 Hybrid, B, Receptacle, Female

M23 Hybrid, Plug, Male

M23 Hybrid, Plug, Female

M23 Hybrid, B, Receptacle, Male

M23 Hybrid, B, Receptacle, Female

M23 Hybrid DMC Series - Plugs M23 Hybrid DMC Series - Receptacles

© 2011 Amphenol Sine Systems Corporation. Every effort has been made to ensure that the information contained in this document is accurate at the time of publication. Specifications or information stated in this document are subject to change without notice. All Rockwell Automation product information, used specifically for comparison purposes only, was gathered from http://www.rockwellautomation.com.

©2013 Amphenol Sine Systems Corporation. Every effort has been made to ensure that the information contained in this document is accurate at the time of publication. Specifications or information stated in this document are subject to change without notice.

www.sineco.com

Kate Wilton, Program Manager - Motion/M23 & M401.586.709.8910 kate@sineco.com

Flyer Number: M23HYBRID2013

M23 HYBRID DMC SERIES™ - TECHNICAL SPECIFICATIONS

Contact Termination Crimp

Contact Type Stamped and Formed 2.5mm / 20 AWG Machined - Quad Element

Insert Configurations Male / Female in Plug or Receptacle

Sealing Material DuPont Viton ™

Temperature Range -20° C to 130° C

Sealing IP67

Shielding EMC Shielded Assembly, Twisted Quad, Sep. Shielded Acc. Cat 5

Protective Ground Connection Per VDE 0627

Safety Protection Per VDE 0623

Mating Cycles 500 Mating Cycles

Strain Relief Clamping Range 7.5 to 17mm

Connector Shell Types Straight Plugs / Receptacles

Coupling Type Threaded M23

M23 HYBRID DMC SERIES™ - ELECTRICAL SPECIFICATIONS

Max Rated Current(Amperage)

17A - 2.0mm / 1A - 1.0mm0.5A - Quad Element

Voltage Rating(AC/DC)

800AC/DC - 2.0mm/1.0mm Contacts30VDC - Quad Element

Transmission Rate Quad Element - 100MBit (CAT 5)

Insulation Voltage Rating (kV)

6/2.0mm - 1.5/1.0mm - 0.5/Quad Element

Protection Class 3

Over Voltage Category III

Max. Operating Altitude 2000

Number /Size of Contacts

2 Power + PE (2.0mm) + 1 Signal (1.0mm)4 Quad Element Ethernet (.7mm)

Wire Range 2.5 - 1.0mm² (2.0mm) / 14 -18AWG(1.0mm) 1.0 -0.34mm² / 18-22AWG(0.7) 0.34 - 0.08mm² / 28AWG

M23 HYBRID DMC SERIES™ - FEATURES AND BENEFITS

Superior Shielding First quality components coupled with a simplistic design provide maximum EMI/RFI shielding capabilities while reducing assembly preparation times.

Cable Strain Relief Your choice of either the innovative design features of FlexGrip™ or traditional cable strain relieving similar to existing standard systems.

Fluid Resistance & Sealing In combination with our strain relief systems, Amphenol utilizes advanced sealing technologies & materials to ensure highest reliability when subjected to the harshest environments.

RoHS Compliant All materials meet the requirements of the European Directive 2002/95/EC, Issue 13.2.2003.

Approvals ISO 9001/2000

Pending Approvals ECBT2/ECBT8 VDE

RoHS

C US®