Deck Fittings -0817 rev10 Deck... · MDK‐2005J CLOSED CHOCK Nominal Size B H H1 L L1 100 60 141...

CONTENTS

Sec on I : Emergency Towing System : Requirements for Towing,

Escor ng and Pull‐Back

Sec on III : MORDEC ETS/SPM Deck Fi ngs

Sec on IV : Panama Canal Authority : New Requirements

Sec on V : ACP Mooring Arrangement

Sec on VI : MORDEC ACP‐MPR

Sec on VII : MORDEC ACP Deck Fi ngs

Sec on VII : MORDEC Equipment Specifica on

Sec on II : Single Point Mooring : Required Arrangement by Deadweight

MORDEC Deck Fi ngs for ACP

MORDEC Deck Fi ngs for ETS and SPM

All rights reserved. All informa on provided in this catalogue supersedes previous issues and is to the best of our knowledge.

Specifica ons are subject to change without no ce. This catalogue is not meant to cons tute an opera onal tool. It is intended

purely as guidance to be used at user’s own risk, and no warran es or representa ons are given nor are any duty of care or

responsibility accepted by MEP and its Group of Companies for any consequences whatsoever resul ng directly or indirectly from

compliance with or reliance on any guidance or advice contained in the catalogue even if caused by a failure to exercise reasonable

care on the part of any of the aforemen oned par es.

———— LEGAL NOTICE ————

ETS / SPM

1

EMERGENCY TOWING SYSTEM REQUIREMENTS FOR TOWING, ESCORTING & PULL‐BACK

ETS / SPM

2


ETS / SPM

3


ETS / SPM

4

SINGLE POINT MOORING REQUIRED ARRANGEMENT BY DEADWEIGHT

ETS / SPM MORDEC ETS/SPM DECK FITTINGS

MDK‐ETS2SB OCIMF SMIT BRACKET

SWL 204TON (ETA) / SWL 350TON (SPM)

FOR TANKERS, BULK CARRIERS, FSO, FPSO etc.

MDK‐ETS2CS OCIMF CHAIN STOPPER


5

MDK‐ETS2JD TOWING CHOCK ‐ JIS TYPE (DECK MOUNTED)


MDK‐ETS2JB TOWING CHOCK ‐ JIS TYPE (BULWARK MOUNTED)


ETS / SPM

6

MORDEC ETS/SPM DECK FITTINGS FOR TANKERS, BULK CARRIERS, FSO, FPSO etc.

MDK‐ETS2DB TOWING CHOCK ‐ DIN TYPE (BULWARK MOUNTED)


MDK‐ETS2DD TOWING CHOCK ‐ DIN TYPE (DECK MOUNTED)


ETS / SPM

7


MDK‐ETS2ES SINGLE BITT BOLLARD (ESCORT)


ETS / SPM

8


MDK‐2017X ENLARGED CHOCK ‐ SWL 100T

BULWARK

DECK

9

MORDEC ETS/SPM DECK FITTINGS ETS / SPM

FOR TANKERS, BULK CARRIERS, FSO, FPSO etc.

ACP

10

PANAMA CANAL AUTHORITY NEW REQUIREMENTS

ACP

11

ACP MOORING ARRANGEMENT REQUIREMENTS ACC. TO ACP NOTICE N‐1‐2016

12

ACP

The Mordec ACP‐MPR So ware Solu ons determines the required Deck

Fi ngs needed by the vessel to meet the requirements of the Panama

Canal Authority. It takes into account the key informa on of the vessel

including the Length, the Breadth and the Draught of the vessel.

It helps vessel owners analyze the new requirements, compared to what

they already have and determines what they really need to purchase and

install in their vessel to be able to transit through the Panama Canal.

MORDEC ACP‐MPR REPORT

MORDEC ACP‐MPR SOFTWARE SOLUTIONS

MORDEC ACP ISO 13795 DOUBLE BOLLARD A450A

SWL 64 TON

MORDEC ACP ISO 13795 DOUBLE BOLLARD A500A

SWL 90 TON

13

ACP MORDEC ACP DECK FITTINGS

DOUBLE BOLLARD

MORDEC ACP ISO 13728 BULWARK CHOCK 360 X 260MM

SWL 64 TON

MORDEC ACP ISO 13729 BULWARK CHOCK 400 X 250 X 428MM

SWL 90 TON

14

ACP

BULWARK CHOCK

MORDEC ACP DECK FITTINGS

MORDEC ACP ISO 13728 DECK CHOCK 360 X 260MM

SWL 64 TON

MORDEC ACP ISO 13729 DECK CHOCK 400 X 250 X 428MM

SWL 90 TON

15

ACP

DECK CHOCK


MORDEC ACP ISO 13776 PEDESTAL ROLLER 350 X 1000MM

SWL 64 TON

16

ACP

PEDESTAL ROLLER


STEEL ROLLERS (ISO 13755)

Depending on the construc on, steel rollers shall be classified as the following three types:

Type A: made of steel cas ng without upper dust cover

Type B: made of steel cas ng with upper dust cover

Type C: made of steel plate with dust cover

MDK‐2005J CLOSED CHOCK

Nominal Size B H H1 L L1

100 60 141 76 170 100

150 90 205 110 250 150

200 120 150 280 340 200

250 160 372 200 434 250

300 200 464 250 528 300

350 220 485 250 600 350

400 240 506 250 672 400

450 260 528 250 746 450

500 280 550 250 820 500

EQUIPMENT SPECIFICATION

17

MDK‐2017J PANAMA CHOCK

TYPE AC

TYPE BC

Nominal Size L H L2 L3 H1 H2

310 310 260 708 652 639 541

360 360 260 760 704 640 542

400 400 260 804 750 642 545

450 450 260 856 802 643 547

500 500 260 908 854 644 549

Nominal Size L L1 L2 H1 H2 H3

310 310 734 652 212 684 462

360 360 788 704 214 688 464

400 400 832 750 216 692 470

450 450 886 802 218 696 474

500 500 940 854 220 700 478


18

MDK‐2007J MOORING PIPE

Nominal Diameter L L1 L2 H H1 H2 B

150 150 300 270 110 260 202 129 200 200 368 334 150 318 250 143 250 250 430 394 200 380 308 155 300 300 500 460 250 450 372 169 350 350 560 518 250 460 378 179 400 400 632 586 250 482 394 195 450 450 700 650 250 500 406 209 500 500 760 708 250 510 412 219

TYPE A

Nominal Diameter L L1 L2 B

150 150 318 288 144

200 200 380 346 155

250 250 450 414 169

300 300 510 470 179

TYPE B


19

MDK‐2030J SINGLE POINT MOORING PIPE

Nominal Size L L1 L2 H H1 H2

400 400 780 570 300 680 460

500 500 940 690 400 840 580

600 600 1100 810 450 950 655

700 700 1260 930 500 1060 730

800 800 1420 1050 600 1220 850

TYPE A

Nominal Size L L1 L2 H H1 H2 H4 B R1

400 400 800 600 300 320 300 260 350 310

500 500 960 720 400 370 350 310 400 360

600 600 1120 840 450 420 400 360 450 410

700 700 1280 960 500 470 450 410 500 460

800 800 1440 1080 600 520 500 460 550 510

TYPE B


20

MDK‐2014J FAIRLEAD ROLLER (OPEN TYPE)

Nominal Diame-ter

Roller D D1 D2 D3 H

150 150 240 220 140 150 200 200 310 280 190 185 250 250 380 340 250 220 300 300 440 400 300 240 350 350 500 455 350 260 400 400 560 520 410 280

Dia.D A B C H

350 825 25 500 1000

400 1020 35 560 1000

450 1020 35 630 1000

500 1120 40 710 1000

560 1180 40 800 1000

PEDESTAL ROLLER


21

MDK‐2585N FAIRLEAD ROLLERS (EU TYPE)

Normal Size D1 D2 H

Mass Breaking Load

Dia of Mooring Line Reference

Wire Rope P.P Rope Hemp Rope

D KG Ton 6X24 6X37

150 240 90 154 25 13 17 15 32 45 200 310 115 186 50 21 22 20 40 55 250 380 135 230 92 28 24 24 45 65 300 440 155 255 127 42 30 28 50 70 350 500 175 271 168 51 38 34 55 75 400 550 195 307 252 74 42 40 65 80 450 630 210 316 310 90 44 42 80 -

Dia.D A B C H

350 825 25 500 1000

400 1020 35 560 1000

450 1020 35 630 1000

500 1120 40 710 1000

560 1180 40 800 1000

PEDESTAL ROLLER


22

MDK‐2026J FAIRLEADS WITH HORIZONTAL ROLLERS

Nominal Diameter B B1 b D1 H h h1 h2 L L1 I

140 310 355 150 140 480 275 130 40 515 805 335

160 360 405 175 160 515 290 145 45 570 890 365

180 410 455 200 180 560 315 155 50 620 960 390

200 460 505 225 200 590 330 170 60 675 1049 420

260 565 610 280 250 715 415 195 75 825 1303 520

315 670 715 330 300 870 520 220 90 980 1562 620

TYPE A


23

Nominal Dia. B D1 H h h1 h2 L L1 I Open Size

Wire Rope Dia

Mass (kg)

140 310 140 480 275 130 40 515 805 335 175X195 18 235

160 360 160 515 290 145 45 570 890 365 175X205 22.4 353

180 410 180 560 315 155 50 620 960 390 190X210 25 496

200 460 200 590 330 170 60 675 1049 420 195X220 28 648

260 565 250 715 415 195 75 825 1303 520 250X270 35 1176

315 670 300 870 520 220 90 980 1562 620 320X320 42 2050

TYPE BR & BL


24

MDK‐2026J FAIRLEADS WITH HORIZONTAL ROLLERS

MDK‐2029J FABRICATED SMIT BRACKETS

Nominal Base Plate Main Eye Pin

No. L1 L2 L4 B1 B2 L3 H R L I D h I1

52 425 470 95 165 230 415 130 95 430 73 100 125

56 450 500 100 180 250 450 140 100 455 78 110 130

60 475 540 115 195 260 480 150 105 475 84 120 140

64 500 580 120 205 270 510 160 110 505 90 130 145

68 530 610 125 220 300 545 170 120 525 80 95 140 155

73 550 660 130 230 310 585 180 130 550 103 150 165

78 600 700 140 260 340 625 195 135 590 110 160 175

84 620 760 150 270 360 670 210 145 615 120 170 185

90 695 810 160 295 390 720 225 160 685 130 180 200

95 725 860 170 305 410 760 235 170 720 135 190 205

102 765 920 185 330 440 815 255 180 745 100 145 205 220

111 805 1000 200 350 470 890 275 190 790 155 220 230

120 850 1080 220 370 510 960 300 205 845 170 240 250

132 900 1200 240 390 560 1050 330 225 895 185 260 270


25

MDK‐6684 STAINLESS STEEL CHAIN STOPPER

Part Num-ber

Chain Size A B C

(mm) (in) (mm) (in) (mm) (in) (mm) (in)

66840077 8 5/16 110 4 5/16 65 2 1/2 79 3 1/8

66840079 10 3/8 110 4 5/16 65 2 1/2 79 3 1/8

66840080 12-13 1/2 148 5 7/8 88 3 1/2 101 4

66840081 13-14 9/16 160 6 5/16 100 3 15/16 106 4 3/16

66840083 16 5/8 184 7 1/4 116 4 9/16 122 4 13/16

66840069 6-10 1/4-3/8 79 3 1/8 60 2 3/8 57 2 1/4


26

MDK-8085 Anchor Fairleader

Size Wire Rope Dia (mm)

Sheave Dia (mm)

Dimensions (mm)

A B C D E

28 28 280 505 475 843 352 635

32 32 300 550 510 912 352 655

38 38 406 765 760 1313 448 858

44 44 500 1000 910 1575 545 1048

50 50 604 1120 1250 1780 700 1308

64 64 608 1270 1270 2250 795 1560


27

MDK-2025J Chain Clenches

Nominal No. Nominal dia. Of applicable chain

Body Calculated Mass (kg) L1 L2 B1 B2

40 38-40 160 0 50 0 5.9

44 42-44 180 0 54 0 8

48 46-48 195 0 58 0 9.8

52 50-52 210 100 64 24 11.1

56 54-56 225 115 68 32 14

60 58-60 240 130 72 40 16

64 62-64 255 145 78 50 18.1

68 66-68 270 150 82 54 23.1

73 70-73 290 170 88 64 26.5

78 76-78 310 190 94 74 30.8

84 81-84 330 210 100 84 35.3

90 87-90 350 230 106 94 42.8

95 92-95 380 250 112 108 50.7

102 98-102 410 270 120 116 66.8

111 105-111 440 300 130 130 84

120 114-120 470 330 140 152 102

Type B


28

MDK-8070 TRIANGLE DELTA PLATE

SWL (T) MBL (T) A B C R

25 125 55 50 150 85

35 175 60 60 160 95

55 275 75 80 210 120

85 425 90 90 230 160

120 600 105 110 280 190

150 750 115 130 320 205

175 875 115 130 320 230

200 1000 140 140 390 250

250 1250 150 160 390 280


29

HEAD OFFICE ADDRESS (SINGAPORE):

9D Jurong Pier Road

Block 3 #03‐01, MEP Building,

Singapore 619177

Tel: (65) 6265 6860 /6266 2910

Fax: (65) 6266 3267

Email: [email protected]

Website: www.mepsystems.com.sg

OUR MANUFACTURING PLANT:

SIN SENG HUAT MACHINERY MANUFACTURE (JIANGSU) CO., LTD

MEP DECK SOLUTIONS PTE LTD

MEP SYSTEMS GROUP OF COMPANIES:

MANUFACTURING OFFICE ADDRESS (CHINA):

No.28, Binhai Avenue, Binhai Industrial Park,

Qidong Economic Development Zone,

Jiangsu, China 226200

Tel: (86) 513 83905068

Fax: (86) 513 83905800

Email: [email protected]

Website: www.sinsenghuat.com

MORDEC INTERNATIONAL PTE LTD

“Your Needs for Today and Tomorrow.”

Date post:	22-Mar-2020
Category:	Documents
Upload:	others
View:	4 times
Download:	0 times

Deck Fittings -0817 rev10 Deck... · MDK‐2005J CLOSED CHOCK Nominal Size B H H1 L L1 100 60 141...

Documents