DECORATIVE AND POST TOP LIGHTING
Decorative Poles ......................................................90
Chadsworth Series................................................90
New Albany Series ...............................................92
Statesboro Series..................................................94
Waycross Series ...................................................96
Weatherproof Receptacles .................................98
Ballast Matrices .....................................................100
Valiant ........................................................................60
American Revolution Deluxe Series ....................62
American Revolution Series 247............................64
Georgian Series GRP ...............................................66
Bainbridge Series 870 .............................................68
Marietta Series.........................................................70
Sumter Series ...........................................................72
Cresthill Classic ........................................................74
Cresthill Sphere ........................................................76
Cresthill Centennial..................................................78
Cresthill Glass ...........................................................80
Lexington ...................................................................82
Branson......................................................................84
Contempo Series 245 ..............................................86
TwistPack Series TWT ............................................88
American Electric Lighting®
59
P R O D U C T O V E R V I E W
60 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
ValiantTM
Series AVP50-250W HPS, 70-250W MH
Features:Die-cast aluminum housing and hood for long-life performance
Optical assembly designed for maximum performance
Hinged hood and captive screw provision afford quick, easy access toelectrical and optical area for relamping or servicing. Trigger latch (TL) optional
Slipfitter with three set screws allows secure installation to pole sizes 2-3/8"or 3" O.D.
E39 mogul base socket standard
Tool-less cupola for easy photocontrol adjustment
Tooled cupola lens to prevent wildlife entry into luminaire
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.3.1
Suitable for -30°C MH / -40°C HPS
40°C Rated
Encapsulated plug-in starter, standard
Stainless steel fasteners (external), standard
Terminal block, standard
Applications:StreetscapesWalkwaysPathwaysParks
DIMENSIONS
Effective Projected Area (EPA)The EPA for the Valiant 2.4 sq. ft.The EPA for the Valiant Vieux is 2.4 sq. ft.The EPA for the Valiant Full Cutoff is 1.5 sq. ft.Approx. Wt. = 36 lbs.
VIEUX OPTIONFULL CUTOFF
PREFERRED SELECTION CATALOG NUMBERS
AVP 13S RH 120 R3 FC NL TLAVP 10S CA MT1 R3 AY LC PC LDR PA30AVP 10S CA MT1 R5 AY VX LC PC LDR PA30AVP 10S RN 120 R3 AY TLAVP 10S RN 120 R5 AY TLAVP 13S RH 120 R3 AY NL HS TL
NEW
61Product Guide
O R D E R I N G I N F O R M A T I O N
ValiantTM
Series AVP50-250W HPS, 70-250W MH
Post Top DesignVX Valiant Vieux4
Paint(blank) Black Textured (standard)
GY GrayWH White
FusingSF Single Fuse (120, 277, 347V)DF Double Fuse (208, 240, 480)
Photocontrol Receptacle(blank) NEMA Photocontrol
Receptacle (standard)NR PECR with Shorting Cap Installed
LampLC Lamp Included, Clear
Options
ListingUL UL ListedCS CSA Certified
Misc.PC Photocontrol Included per
Voltage Specified5
NL NEMA Label AttachedHS Houseside Shield4
SH Shorting Cap5
TL Tool-less Trigger Latch EntryHP High Performance Optics6
LDR Ladder Rest7
PA30 Terminal Block Pre-wired 30’# 10 CU Solid B/W/G
PB30 Terminal Block Pre-wired 30’# 10 CU Solid B/B/G
PC30 Terminal Block Pre-wired 30’# 10 CU Solid B/B/W/G
Example: A V P 1 7 M C A M T 1 R 3 A Y L C P C L D R P A 3 0
AVP Valiant Post Top 05 50W07 70W10 100W13 100/150W15 150W17 175W20 200W1
25 250W
DistributionBallastWattage / SourceSeries
R2 Type IIR3 Type IIIR5 Type V
Refer to optical matrixbelow for compatibility
CA CWA Autotransformer
CT CWIAutotransformer
SC SCWA2
RH Reactor High Power Factor
RN Reactor Normal Power Factor
XH High Reactance/LagHigh Power Factor
XN High Reactance/LagNormal Power Factor
Refer to ballast matrix onpage 100 for compatibility.
S HPSM MH
Voltage
120 120V208 208V240 240V277 277V347 347V480 480V
DT1 Dual Tap 120/240wired 120
DT2 Dual Tap 120/240wired 240
MT1 Multi-tap Wired 120MT2 Multi-tap Wired 240MT7 Multi-tap Wired 277MT8 Multi-tap Wired 208TT3 Tri-tap Wired 347
Optics
AY AcrylicPY Polycarbonate3
FC Full Cutoff8
Notes:
1 Available in HPS only2 Contact factory for availability3 PY available in 175W max4 Full cutoff not available5 Not available with NR option6 Not available with VX or FC options7 Ships with unit, field installed8 Nighttime FriendlyTM optic
R2 AY R3 AY R5 AY R3 AY VX R5 AY VX R3 FC R2 AY HP R5 AY HP05S � � � � � � � �
07S � � � � � � � �
10S � � � � � � � �
15S � � � � � � � �
20S � � � � � - � �
25S � � � � � - � �
17M � � � � � � � �
25M � � � � � � � �
Optic Distribution
P R O D U C T O V E R V I E W
62 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
American Revolution DeluxeSeries ARD and ARD Cutoff50-150W HPS, 70-175W MH
Features:Die-cast aluminum housing and hood for long-life performance
Die-cast trigger latch (TL) option available for easy access to internalcomponents
Optical assembly designed for maximum performance
Hinged hood and captive screw provision afford quick, easy access toelectrical and optical area for relamping or servicing
Slipfitter with three set screws allows secure installation to pole sizes 2-3/8" or3" O.D.
E39 Mogul base socket standard
Meets IESNA Full Cutoff classification
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Suitable for -30ºC MH / -40ºC HPS
Tool-less cupola for easy photocontrol adjustment
Tooled cupola lens to prevent wildlife entry into luminaire
Complies with ANSI: C136.2, C136.10, C136.15, C136.3.1
40°C Rated
Stainless steel fasteners (external), standard
Terminal block, standard
Full cutoff version is “Nighttime FriendlyTM”
Applications:StreetscapesWalkwaysPathwaysParks
DIMENSIONS
Effective Projected Area (EPA)The EPA for the American Revolution Series 247 is 1.6 sq. ft.Approx. Wt. = 36 lbs.
PREFERRED SELECTION CATALOG NUMBERS
ARD 10S RN 120 R3 AY EC TLARD 10S RN 120 R5 AY EC TLARD 10M XN MT1 R3 AY TLARD 10S CA MT1 R2 FC EC TL
NEW
63Product Guide
O R D E R I N G I N F O R M A T I O N
Example: A R D 1 5 S R N 1 2 0 R 5 A Y E C
American Revolution DeluxeSeries ARD and ARD Cutoff
50-150W HPS, 70-175W MH
ARD American RevolutionDeluxePost Top
05 50W07 70W10 100W15 150W17 175W
DistributionBallastWattage / SourceSeries
R2 Type IIR3 Type III11
R5 Type V2,11
RV Type V3.11
RN Reactor NormalPower Factor
RH Reactor HighPower Factor
XN High Reactance / Lag Normal Power Factor
XH High Reactance / Lag High Power Factor
CA CWA Autotransformer
Refer to ballast matrix onpage 100 for compatibility.
S HPSM MH
Notes:
1 Voids UL/CSA Listing2 Four white panels3 Four clear panels4 Other colors available, please contact your local
American Electric Lighting representative5 PC, SH not available with NR option6 HPS only7 Limited availability, please contact your local
American Electric Lighting representative8 T3 option only available with 240, 480, DT2, DT4, MT29 Acrylic only
10 Not available in MT voltage11 Not available on FC version12 Nighttime FriendlyTM optic13 Ships with unit, field installed
Voltage
120 120V208 208V240 240V277 277V480 480V
MT1 Multi-tap wired 120VMT8 Multi-tap wired 208VMT2 Multi-tap wired 240VMT7 Multi-tap wired 277V
AY Acrylic*PY Polycarbonate*FC Full Cutoff12
Optics
Paint4
(blank) Black (standard)GY Gray
WH WhiteBZ Bronze
Terminal Block(blank) Terminal Block (standard)
T2 Wired to L1 & L2 PositionT3 3 Wire Operation (L1, N, L2 Position)11
Listing11
UL UL ListedCS CSA Certified
Fusing10
SF Single Fuse (120, 277, 347V)DF Double Fuse (208, 240, 480V)
Photocontrol Receptacle(blank) NEMA Photocontrol Receptacle
(standard)NR No Photocontrol Receptacle5
Options
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
Starter6
(blank) Open Board (standard)EC Encapsulated Plug-in11
OP Open Plug-in11
Misc.PC Photocontrol Included per
Voltage Specified5
SH Shorting Cap5
SS Stainless Steel Hardware5H 50 Hertz Ballast Cycle7
NL NEMA Label (2x2)HS House Side Shield9
TL Tool-less EntryLDR Ladder Rest13
*Refer to optical matrix below for compatibility
R2 AY R3 AY R5 AY RV AY R2 PY R3 PY R5 PY RV PY R2 FC05S � � � � � � � � �
07S � � � � � � � � �
10S � � � � � � � � �
15S � � � � � � � � �
07M � � � � � � � � �
10M � � � � � � � � �
15M � � � � � � � � �
17M � � � � � � � � �
Optic Distribution
P R O D U C T O V E R V I E W
64 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
American RevolutionSeries 247 and 247 Cutoff50-150W HPS, 70-175W MH
Features:Die-cast aluminum housing and hood for long-life performance
Die-cast trigger latch (TL) option available for easy access to internalcomponents
Optical assembly designed for maximum performance
Hinged hood and captive screw provision afford quick, easy access toelectrical and optical area for relamping or servicing
Slipfitter with three set screws allows secure installation to pole sizes 2-3/8" or3" O.D.
E39 mogul base socket standard
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.31 (regular only), C136.16(FC only)
Suitable for -30°C MH & / -40°C HPS
Full cutoff version is “Nighttime FriendlyTM”
Applications:StreetscapesWalkwaysPathwaysParks
DIMENSIONS
Effective Projected Area (EPA)The EPA for the American Revolution Series 247 is 1.6 sq. ft.Approx. Wt. = 36 lbs.
PREFERRED SELECTION CATALOG NUMBERS
Series 247247 10S RN 120 R3 AY247 15S RN 120 R3 AY247 10S RN 120 R5 AY247 15S RN 120 R5 AY
Series 247 Cutoff247 10S RN 120 R2 FC TL247 10M XN MT1 R2 FC TL
SERIES 247
SERIES 247 CUTOFF
65Product Guide
O R D E R I N G I N F O R M A T I O N
Example: 2 4 7 1 5 S R N 1 2 0 R 5 A Y E C
American RevolutionSeries 247 and 247 Cutoff
50-150W HPS, 70-175W MH
247 American RevolutionPost Top
05 50W07 70W10 100W15 150W17 175W
DistributionBallastWattage / SourceSeries
R2 Type IIR3 Type III11
R5 Type V2,11
RV Type V3.11
RN Reactor NormalPower Factor
RH Reactor HighPower Factor
XN High Reactance / Lag Normal Power Factor
XH High Reactance / Lag High Power Factor
CA CWA AutotransformerCT CWI Autotransformer
Refer to ballast matrix onpage 101 for compatibility.
S HPSM MH
Notes:
1 Voids UL/CSA Listing2 Four white panels3 Four clear panels4 Other colors available, please contact your local
American Electric Lighting representative5 PC, SH not available with NR option6 HPS only7 Limited availability, please contact your local
American Electric Lighting representative8 T3 option only available with 240, 480, DT2, DT4, MT29 Acrylic only
10 Not available in MT, TT, DT voltages11 Not available on FC version12 Nighttime FriendlyTM optic13 Ships with unit, field installed
Voltage
120 120V208 208V240 240V277 277V347 347V480 480V
MT1 Multi-tap Wired 120VMT2 Multi-tap Wired 240VMT7 Multi-tap Wired 277VTT3 Tri-tap Wired 347VDT2 Dual Tap 120/240
Wired 240V
AY Acrylic*PY Polycarbonate*FC Full Cutoff12
Optics
Paint4
(blank) Black (standard)GY Gray
WH WhiteBZ Bronze
Terminal Block(blank) Terminal Block (standard)
T2 Wired to L1 & L2 PositionT3 3 Wire Operation (L1, N, L2 Position)11
Listing11
UL UL ListedCS CSA Certified
Fusing10
SF Single Fuse (120, 277, 347V)DF Double Fuse (208, 240, 480V)
Photocontrol Receptacle(blank) NEMA Photocontrol Receptacle
(standard)NR No Photocontrol Receptacle5
Options
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
Starter6
(blank) Open Board (standard)EC Encapsulated Plug-in11
OP Open Plug-in11
Misc.PC Photocontrol Included per
Voltage Specified5
SH Shorting Cap5
SS Stainless Steel Hardware5H 50 Hertz Ballast Cycle7
NL NEMA Label (2x2)HS House Side Shield9
TL Tool-less EntryLDR Ladder Rest13
*Refer to optical matrix below for compatibility
R2 AY R3 AY R5 AY RV AY R2 PY R3 PY R5 PY RV PY R2 FC05S � � � � � � � � �
07S � � � � � � � � �
10S � � � � � � � � �
15S � � � � � � � � �
07M � � � � � � � � �
10M � � � � � � � � �
15M � � � � � � � � �
17M � � � � � � � � �
Optic Distribution
P R O D U C T O V E R V I E W
66 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
GeorgianSeries GRP50-150W HPS, 70-175W MH
Applications:Residential areasArchitectural landscape lightingParks, walkwaysRecreational areasCommercial environments
Features:Two (2) piece cast aluminum housing
Castings are hinged and open with a simple 1/4 turn thumb screw for easymaintenance
Choice of two (2) mounting arrangements: side entry or post top
Lenses are sealed with neoprene gaskets to prevent ingress of dirt ormoisture in luminaire. Bottom lens is sealed with a felt gasket for properbreathing of luminaire (top entry and side entry units only)
All ballasts are mounted on a ballast plate with quick disconnect, for easyreplacement
All exposed screws are stainless steel
Cast aluminum slipfitter accepts 3” to 3-1/2” O.D. X 4” long tenon or pole.Mounting hardware included
A photocell cupola is supplied when ordering the photocell receptacle
Mogul base socket
Certified by CSA and UL standards
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.16
DIMENSIONS
Effective Projected Area (EPA)The EPA for the Georgian is 2.93 sq. ft.Approx. Wt. = 46 lbs.
PREFERRED SELECTION CATALOG NUMBERS
GRS 10S CT DT1 R2 RD SB CS EC NL PC PYGRS 15S CT DT1 R3 RD CS EC NL PC PYGRP 10S CT DT1 R3 RD SB CS EC NL PC CD PYGRP 15S CT DT1 R3 RD SB CS EC PC NL PY
SIDE MOUNTPOST TOP
67Product Guide
O R D E R I N G I N F O R M A T I O N
GeorgianSeries GRP
50-150W HPS, 70-175W MH
GRP Post TopGRS Side MountGRL Post Top w/
ladder rest
05 50W07 70W10 100W15 150W17 175W
DistributionBallastWattage / SourceSeries
R2 Roadway Type IIR3 Roadway Type IIIR5 Type 51
CA CWA AutotransformerCT CWI AutotransformerRN Reactor Normal
Power FactorRH Reactor High
Power FactorXN High Reactance / Lag
Normal Power FactorXH High Reactance / Lag
High Power Factor
Refer to ballast matrix onpage 102 for compatibility.
M MHS HPS
Voltage
120 120V208 208V240 240V277 277V347 347V480 480V
DT1 Dual Tap 120/240 Wired 120DT2 Dual Tap 120/240 Wired 240MT1 Multi-tap Wired 120MT2 Multi-tap Wired 240MT7 Multi-tap Wired 277TT3 Tri-tap Wired 347
RD High PerformanceRoadway Reflector
OA Open Bottom Acrylic2
CR Cone Reflector
Optics
Options
Paint(blank) Black (standard)
BZ BronzeGY Gray
WH WhiteSB Shibui Brown
Terminal BlockT2 Wired to L1 & L2 PositionsT3 3 Wire Operation (L1, N, L2 Position)3
Listing(blank) UL Listing (standard)
CS CSA Certified
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
Starter4
EC Encapsulated Plug-inOP Open Plug-in
Photocontrol Receptacle(blank) NEMA Photocontrol Receptacle
NR No Receptacle
Misc.PC Photocontrol IncludedSH Shorting Cap NL NEMA LabelCH Decorative Chimney2
CD Decorative Candle2
CB Century Base
Side PanelsGL GlassPY PolycarbonateAY AcrylicPE Pebbled Glass
Example: G R P 1 0 S R H 1 2 0 R 3 R D P Y
Notes:
1 Available only with OA optics2 Cannot be used together with other optics3 T3 option only available with 240, 480, DT2, DT4, MT24 HPS only
P R O D U C T O V E R V I E W
68 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
BainbridgeSeries 87050-150W HPS,175W MH
Features:Architecturally complimentary design
Powdercoated, paint finish
Terminal block for ease of wiring
A variety of wattages and ballast types
Available in HPS and MH
Easy access to electrical components
Available in a variety of IES distributions
E39 mogul base socket standard
All electrical components warranted by American Electric Lighting’s 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.31
Suitable for -30°C MH / -40°C HPS
Applications:Office buildingsShopping centersMallsApartment/condominium complexesCommercial developments
16-1/2”(419)
27”(686)
37”(940)
DIMENSIONS
Effective Projected Area (EPA)The EPA for the Bainbridge Series 870 is 3.7 sq. ft.Approx. Wt. = 28 lbs.
69Product Guide
O R D E R I N G I N F O R M A T I O N
BainbridgeSeries 870
50-150W HPS,175W MH
Series
870 Bainbridge
BallastWattage / Source Voltage
05 50W07 70W10 100W15 150W17 175W
S HPSM MH
CA CWA AutotransformerRH Reactor High
Power FactorRN Reactor Normal
Power FactorXH High Reactance / Lag
High Power FactorXN High Reactance / Lag
Normal Power Factor
Refer to ballast matrix on page 102for compatibility.
120 120V208 208V240 240V277 277V480 480V
DT2 Dual Tap 120/240Wired 240
MT1 Multi-tap Wired 120VMT2 Multi-tap Wired 240VMT7 Multi-tap Wired 277V
Distribution
R3 Type III1
R5 Type V1
R0 No Internal Refractor
Options
AY AcrylicPY Polycarbonate
WC White Polycarbonate
Optics
Paint(blank) Black (standard)
BZ Bronze
Terminal BlockT2 Wired to L1 & L2 PositionsT3 3 Wire Operation (L1, N, L2 Position)2
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
Photocontrol(blank) None
BC Button-photocontrol
Misc.SS Stainless Steel HardwareNL NEMA Label
Example: 8 7 0 1 0 S C A M T 1 R 3 A Y L C
Notes:
1 Achieved with internal glass refractor2 T3 option only available with 240, 480, DT2, DT4, MT2
P R O D U C T O V E R V I E W
70 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
P R O D U C T O V E R V I E W
Applications:StreetscapesWalkwaysPathwaysParks
MariettaSeries LMD50-250W HPS, 50-250W MH
Effective Projected Area (EPA)The EPA for the Marietta Series is 2.7 sq. ft.Approx. Wt. = 24lbs.
DIMENSIONS
Features:Available in solid or clear top prismatic globe
Interchangeable base with a wide variety of globes
Symmetric or Asymmetric distribution
Available in Semi-Cutoff IES classification
Injection-molded, high-impact acrylic or polycarbonate
Excellent uniformity, light distribution and efficiency
Maximizes pole spacing
Base and optical ship separately
HPS units standard with encapsulated starter that is located at the socket forquick access
Quick disconnect plug for easy maintenance
Easy access component door
Photocontrol and terminal block available and located with easy access fromcomponent door
Uplight shield is standard
E39 mogul base socket standard
Mounts to 3” x 3” pole top tenons
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.31
Suitable for -30°C MH / -40°C HPS
PREFERRED SELECTION CATALOG NUMBERS
LMD 10S RN 120 R3 PA PRLMD 10S RN 120 R5 PA PRLMD 10M XN MT1 R3 PA PRLMD 10M XN MT1 R5 PA PR
71Product Guide
O R D E R I N G I N F O R M A T I O N
Example: L M D 1 7 M C A M T 1 R 5 P A P R P C
Series
LMD Marietta
Notes:
1 For use with PR option2 250W adds 3” to housing height3 Other colors available, please contact your local
American Electric Lighting representative4 T3 option only available with 240, 480, DT2, DT4, MT25 Standard with PA optic
GlobePA Prismatic Acrylic SolidTop (optical)PT Prismatic Clear Top Polycarbonate
(optical)PN Prismatic Clear Top Acrylic
(optical)
Paint3
(blank) BlackVG Verde GreenBZ Bronze
Terminal Block(blank) Terminal Block (std)
T2 Wired to L1 & L2 PositionsT3 3 Wire Operations (L1, N, L2 Position)4
Receptacle(blank) No Photocontrol Receptacle (std)
PR Photocontrol Receptacle
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
MiscPC Locking Type Photocontrol1SH Shorting Cap1
SS Stainless Steel Fasteners (external)BD Without Decorative CageF5 Spike Finial5TL Tool-less Entry
US Uplight Shield
MariettaSeries LMD
50-250W HPS, 50-250W MH
BallastWattage / Source Voltage
05 50W07 70W10 100W15 150W17 175W25 250W2
S HPSM MH
RN Reactor NormalPower Factor
RH Reactor HighPower Factor
XN High Reactance/Lag NPFXH High Reactance/Lag HPFCA CWA Auto-RegCT CWI
Refer to ballast matrix on page 102for compatibility.
120 120V208 208V240 240V277 277V347 347V480 480V
MT1 Multi-tap Wired 120VMT2 Multi-tap Wired 240VMT7 Multi-tap Wired 277VDT2 Dual Tap 120/240
Wired 240VTT3 Tri-tap Wired 347V
Distribution
R3 Type IIIR5 Type V
Options
P R O D U C T O V E R V I E W
72 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
P R O D U C T O V E R V I E W
Features:Solid top prismatic globe
Interchangeable base with a wide variety of globes
Symmetric or Asymmetric distribution
Available in Semi-Cutoff IES classification
Injection-molded, high-impact acrylic or polycarbonate
Excellent uniformity, light distribution and efficiency
Maximizes pole spacing
Base and optical ship separately
HPS units standard with encapsulated starter that is located at the socket forquick access
Quick disconnect plug for easy maintenance
Easy access component door
Photocontrol and terminal block available and located with easy access fromcomponent door
E39 mogul base socket standard
Mounts to 3” x 3” pole top tenons
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.31
Suitable for -30°C MH / -40°C HPS
Applications:StreetscapesWalkwaysPathwaysParks
SumterSeries LSH50-250W HPS, 50-250W MH
DIMENSIONS
Effective Projected Area (EPA)The EPA for the Sumter Series is 2.7 sq. ft.Approx. Wt. = 24 lbs.
73Product Guide
O R D E R I N G I N F O R M A T I O N
Example: L S H 1 7 M C A 1 2 0 R 5 P A P R L C P C
Series
LSH Sumter
Notes:
1 250W adds 3” to housing height2 T3 option only available with 240, 480, DT2, DT4, MT23 For use with PR option
GlobePP Prismatic Polycarbonate (optical)PA Prismatic Acrylic (optical)
Paint(blank) Black
VG Verde GreenBZ Bronze
Terminal Block(blank) Terminal Block (std)
T2 Wired to L1 & L2 PositionsT3 3 Wire Operations (L1, N, L2 Position)2
Receptacle(blank) No Photocontrol Receptacle (std)
PR Photocontrol Receptacle
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
MiscPC Locking Type Photocontrol3SH Shorting Cap3
SS Stainless Steel Fasteners (external)
SumterSeries LSH
50-250W HPS, 50-250W MH
BallastWattage / Source Voltage
05 50W07 70W10 100W15 150W17 175W25 250W1
S HPSM MH
RN Reactor NormalPower Factor
RH Reactor HighPower Factor
XN High Reactance/Lag NPFXH High Reactance/Lag HPFCA CWA Auto-RegCT CWI
Refer to ballast matrix on page 103for compatibility.
120 120V208 208V240 240V277 277V347 347V480 480V
MT1 Multi-tap Wired 120VMT2 Multi-tap Wired 240VMT7 Multi-tap Wired 277VDT2 Dual Tap 120/240
Wired 240TT3 Tri-tap Wired 347V
Distribution
R3 Type IIIR5 Type V
Options
P R O D U C T O V E R V I E W
74 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
Cresthill ClassicSeries LCR50-150W HPS, 50-175W MH
Features:Interchangeable base with a wide variety of globes
Symmetric or Asymmetric distribution
Globe available in stepped acrylic and polycarbonate or prismatic acrylic andpolycarbonate
Base and optical ship separately
HPS units standard with encapsulated starter that is located at the socket forquick access
Quick disconnect plug for easy maintenance
Easy access component door
Photocontrol and terminal block available and located with easy access fromcomponent door
E39 mogul base socket standard
Mounts to 3” x 3” pole top tenons
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.31
Suitable for -30°C MH / -40°C HPS
Applications:StreetscapesWalkwaysPathwaysParks
DIMENSIONS
Effective Projected Area (EPA)The EPA for the Cresthill Classic is 1.4 sq. ft.Approx. Wt. = 37 lbs.
PREFERRED SELECTION CATALOG NUMBERS
LCR 10S RN 120 R5 AA PR
75Product Guide
O R D E R I N G I N F O R M A T I O N
Example: L C R 1 0 S R N 1 2 0 R 5 A P P R L C P R
Series
LCR Cresthill
Notes:
1 Not available with PN or PT options2 Achieved with internal glass refractor
except with prismatic globes3 T3 option only available with 240, 480, DT2, DT4, MT24 For use with PR options5 For use with PN and PT only
Globe AP Classic Large Clear Polycarbonate
(Non-optical)AA Classic Large Clear Acrylic
(Non-optical)PT Prismatic Polycarbonate (optical)PN Prismatic Acrylic (optical)
Paint(blank) Black
VG Verde GreenBZ Bronze
Terminal Block(blank) Terminal Block (std)
T2 Wired to L1 & L2 PositionsT3 3 Wire Operations (L1, N, L2 Position)3
Receptacle(blank) No Photocontrol Receptacle (std)
PR Photocontrol Receptacle
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
MiscF5 Finial
PC Locking Type Photocontrol4SH Shorting Cap4
SS Stainless Steel Fasteners (external)US Uplight Shield5
9R 9" Globe Neck
Cresthill ClassicSeries LCR
50-150W HPS, 50-175W MH
BallastWattage / Source Voltage
05 50W07 70W10 100W15 150W17 175W
S HPSM MH
RN Reactor NormalPower Factor
RH Reactor HighPower Factor
XN High Reactance/Lag NPFXH High Reactance/Lag HPFCA CWA Auto-RegCT CWI
Refer to ballast matrix on page 103for compatibility.
120 120V208 208V240 240V277 277V347 347V480 480V
MT1 Multi-tap Wired 120VMT2 Multi-tap Wired 240VMT7 Multi-tap Wired 277VDT2 Dual Tap 120/240
Wired 240
Distribution
R0 No InternalRefractor1
R3 Type III2
R5 Type V2
Options
P R O D U C T O V E R V I E W
76 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
Cresthill SphereSeries LCR50-150W HPS, 50-175W MH
Applications:StreetscapesWalkwaysPathwaysParks
DIMENSIONS
Features:Interchangeable base with a wide variety of globes
Symmetric or Asymmetric distribution
Globe 22” white acrylic or clear polycarbonate
Base and optical ship separately
HPS units standard with encapsulated starter that is located at the socketfor quick access
Quick disconnect plug for easy maintenance
Easy access component door
Photocontrol and terminal block available and located with easy accessfrom component door
E39 mogul base socket standard
Mounts to 3” x 3” pole top tenons
Powdercoat finish
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.31
Suitable for -30°C MH / -40°C HPS
Effective Projected Area (EPA)The EPA for the Cresthill Sphere is 2.5 sq. ft.Approx. Wt. = 22lbs.
77Product Guide
O R D E R I N G I N F O R M A T I O N
Series
LCR Cresthill
Notes:
1 Achieved with internal glass refractor 2 Available in 9R only, requires 9R housing3 T3 option only available with 240, 480, DT2, DT4, MT24 For use with PR options5 For 9” neck 22” diameter globe is used
GlobeSL Sphere White Polycarbonate2
SY Sphere White Acrylic2
Paint(blank) Black
VG Verde GreenBZ Bronze
Terminal Block(blank) Terminal Block (std)
T2 Wired to L1 & L2 PositionsT3 3 Wire Operations (L1, N, L2 Position)3
Receptacle(blank) No Photocontrol Receptacle (standard)
PR Photocontrol Receptacle
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
Photocontrol(blank) None
PC Locking Type Photocontrol4
MiscSH Shorting Cap4
SS Stainless Steel Fasteners (external)9R 9" Globe Neck5
BallastWattage / Source Voltage
05 50W07 70W10 100W15 150W17 175W
S HPSM MH
RN Reactor NormalPower Factor
RH Reactor HighPower Factor
XN High Reactance/Lag NPFXH High Reactance/Lag HPFCA CWA Auto-RegCT CWI
Refer to ballast matrix on page 103for compatibility.
120 120V208 208V240 240V277 277V480 480V
MT1 Multi-tap Wired 120VMT8 Multi-tap Wired 208VMT2 Multi-tap Wired 240VMT7 Multi-tap Wired 277VDT1 Dual Tap 120/240
Wired 120DT2 Dual Tap 120/240
Wired 240
Distribution
R0 No Internal Refractor
R3 Type III1
R5 Type V1
Example: L C R 1 0 S R N 1 2 0 R 5 S Y P R L C P C
Cresthill SphereSeries LCR
50-150W HPS, 50-175W MH
Options
P R O D U C T O V E R V I E W
78 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
Applications:StreetscapesWalkwaysPathwaysParks
DIMENSIONS
Features:Interchangeable base with a wide variety of globes
Symmetric or Asymmetric distribution
Acrylic or polycarbonate globe
Base and optical ship separately
HPS units standard with encapsulated starter that is located at the socketfor quick access
Quick disconnect plug for easy maintenance
Easy access component door
Photocontrol and terminal block available and located with easy accessfrom component door
E39 mogul base socket standard
Mounts to 3” x 3” pole top tenons
Powdercoat finish
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.31
Suitable for -30°C MH / -40°C HPS
Cresthill CentennialSeries LCR50-150W HPS, 100-175W MH
Effective Projected Area (EPA)The EPA for the Cresthill Centennial is 1.2 sq. ft.Approx. Wt. = 22lbs.
79Product Guide
O R D E R I N G I N F O R M A T I O N
Example: L C R 1 0 S R N 1 2 0 R 5 C Y P R L C P C
Series
LCR Cresthill
Notes:
1 Achieved with internal glass refractor 2 For use with 9R option only, requires 9R housing3 T3 option only available with 240, 480, DT2, DT4, MT24 For use with PR options
GlobeCE Centennial Large Clear Acrylic
(Non-optical)CW Centennial Large White
Polycarbonate2
CY Centennial Large Clear AcrylicCM Centennial Medium Clear Acrylic
Paint(blank) Black
VG Verde GreenBZ Bronze
Terminal Block(blank) Terminal Block (standard)
T2 Wired to L1 & L2 PositionsT3 3 Wire Operations (L1, N, L2 Position3
Receptacle(blank) No Photocontrol Receptacle
(standard)PR Photocontrol Rseceptacle
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
MiscPC Twist-off Photocontrol4SH Shorting Cap4
SS Stainless Steel Fasteners (external)9R 9" Globe Neck
BallastWattage / Source Voltage
05 50W07 70W10 100W15 150W17 175W
S HPSM MH
RN Reactor NormalPower Factor
RH Reactor HighPower Factor
XN High Reactance/Lag NPFXH High Reactance/Lag HPFCA CWA Auto-RegCT CWI
Refer to ballast matrix on page 103for compatibility.
120 120V208 208V240 240V277 277V347 347V480 480V
MT1 Multi-tap Wired 120VMT2 Multi-tap Wired 240VMT7 Multi-tap Wired 277VTT3 Tri-tap Wired 347DT2 Dual Tap 120/240
Wired 240
Distribution
RO No Internal Refractor
R3 Type III1
R5 Type V1
Cresthill CentennialSeries LCR
50-150W HPS, 100-175W MH
Options
P R O D U C T O V E R V I E W
80 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
Cresthill GlassSeries LCR50-250W HPS, 50-250W MH
Applications:StreetscapesWalkwaysPathwaysParks
DIMENSIONS
Features:Interchangeable base with a wide variety of globes
Symmetric or Asymmetric distribution
Prismatic glass globe
Base and optical ship separately
HPS units standard with encapsulated starter that is located at the socket forquick access
Quick disconnect plug for easy maintenance
Easy access component door
Photocontrol and terminal block available and located with easy access fromcomponent door
E39 mogul base socket standard
Mounts to 3” x 3” pole top tenons
Powdercoat finish
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.31
Suitable for -30°C MH / -40°C HPS
Effective Projected Area (EPA)The EPA for the Cresthill Glass is 1.4 sq. ft.Approx. Wt. = 37lbs.
81Product Guide
O R D E R I N G I N F O R M A T I O N
Example: L C R 1 0 S R N 1 2 0 R 5 P G P R L C P C
Series
LCR Cresthill
Notes:
1 250 W adds 3” to cast housing height2 T3 option only available with 240, 480, DT2, DT4, MT23 For use with PR options
Options
GlobePG Prismatic Glass
Paint(blank) Black
VG Verde GreenBZ Bronze
Terminal Block(blank) Terminal Block (std)
T2 Wired to L1 & L2 PositionsT3 3 Wire Operations (L1, N, L2 Position)2
Receptacle(blank) No Photocontrol Receptacle (std)
PR Photocontrol Receptacle
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
MiscPC Locking Type Photocontrol3SH Shorting Cap3
SS Stainless Steel Fasteners (external)F5 Finial
BallastWattage / Source Voltage
05 50W07 70W10 100W15 150W17 175W25 250W1
S HPSM MH
RN Reactor NormalPower Factor
RH Reactor HighPower Factor
XN High Reactance/Lag NPFXH High Reactance/Lag HPFCA CWA Auto-RegCT CWI
Refer to ballast matrix on page 104for compatibility.
120 120V208 208V240 240V277 277V347 347V480 480V
MT1 Multi-tap Wired 120VMT2 Multi-tap Wired 240VMT7 Multi-tap Wired 277VTT3 Tri-tap Wired 347DT2 Dual Tap 120/240
Wired 240
Distribution
R3 Type IIIR5 Type V
Cresthill GlassSeries LCR
50-250W HPS, 50-250W MH
P R O D U C T O V E R V I E W
82 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
Applications:StreetscapesWalkwaysPathwaysParks
LexingtonSeries LLX50-150W HPS, 100-175W MH
Features:Available with or without spikes
Interchangeable base with a wide variety of lenses
Symmetric or Asymmetric distribution
Decorative spike finial standard
Rugged cast-aluminum housing
Lens available in acrylic, polycarbonate or clear glass
Base and optical ship separately
HPS units standard with encapsulated starter that is located at the socket forquick access
Quick disconnect plug for easy maintenance
Easy access component door
Photocontrol and terminal block available and located with easy access fromcomponent door
E39 mogul base socket standard
Mounts to 3” x 3” pole top tenons
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.31
Suitable for -30°C MH / -40°C HPSDIMENSIONS
Effective Projected Area (EPA)The EPA for the Lexington is 3.1 sq. ft.Approx. Wt. = 33 lbs.
83Product Guide
O R D E R I N G I N F O R M A T I O N
Example: L L X 1 0 S R N 1 2 0 R 5 A Y P R L C P C
LexingtonSeries LLX
50-150W HPS, 100-175W MH
Series
LLX Lexington
Notes:
1 Achieved with internal glass refractor2 T3 option only available with 240, 480, DT2, DT4, MT23 For use with PR option
Options
GlobeAY AcrylicPY PolycarbonateGL Glass
Paint(blank) Black
VG Verde GreenBZ Bronze
Terminal Block(blank) Terminal Block (std)
T2 Wired to L1 & L2 PositionsT3 3 Wire Operations (L1, N, L2 Position)2
Receptacle(blank) No Photocontrol Receptacle (std)
PR Photocontrol Receptacle
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
MiscPC Locking Type Photocontrol3SH Shorting Cap3
SS Stainless Steel Fasteners (external)NS No Spikes on LLX Housing
BallastWattage / Source Voltage
05 50W07 70W10 100W15 150W17 175W
S HPSM MH
RN Reactor NormalPower Factor
RH Reactor HighPower Factor
XN High Reactance/Lag NPFXH High Reactance/Lag HPFCA CWA Auto-RegCT CWI
Refer to ballast matrix on page 104for compatibility.
120 120V208 208V240 240V277 277V347 347V480 480V
MT1 Multi-tap Wired 120VMT2 Multi-tap Wired 240VMT7 Multi-tap Wired 277VDT2 Dual Tap 120/240
Wired 240
Distribution
R0 No Internal Refractor
R3 Type III1
R5 Type V1
P R O D U C T O V E R V I E W
84 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
Features:Ornamental aluminum canopy top
Interchangeable base with a variety of globes
Symmetric or Asymmetric distribution
Base and optical ship separately
Powdercoat finish
HPS units standard with encapsulated starter that is located at the socket forquick access
Quick disconnect plug for easy maintenance
Easy access component door
Photocontrol and terminal block available and located with easy access fromcomponent door
E39 mogul base lamp holder standard
Mounts to 3” x 3” pole top tenons
Available in stippled acrylic or polycarbonate globes
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.31
Suitable for -30°C MH / -40°C HPS
Applications:StreetscapesWalkwaysPathwaysParks
BransonSeries LBR50-150W HPS, 50-175W MH
13”(330)
38”(965)
3-1/4”(83)
DIMENSIONS
Effective Projected Area (EPA)The EPA for the Branson is 2.3 sq. ft.Approx. Wt. = 22 lbs.
PREFERRED SELECTION CATALOG NUMBERS
LBR 10S RN 120 R3 AY PRLBR 10S RN 120 R5 AY PR
85Product Guide
O R D E R I N G I N F O R M A T I O N
Example: L B R 1 5 S C A M T 1 R 5 P Y L C
Series
LBR Branson
Notes:
1 Achieved with internal glass refractor except with prismatic globes
2 Other colors available, please contact your localAmerican Electric Lighting representative
3 T3 option only available with 240, 480, DT2, DT4, MT24 For use with PR option
GlobeAY AcrylicPY Polycarbonate
Paint2
(blank) Black
Terminal Block(blank) Terminal Block (std)
T2 Wired to L1 & L2 PositionsT3 3 Wire Operations (L1, N, L2 Position)3
Receptacle(blank) No Photocontrol Receptacle (std)
PR Photocontrol Receptacle
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
MiscPC Locking Type Photocontrol4SH Shorting Cap4
SS Stainless Steel Fasteners (external)
BransonSeries LBR
50-150W HPS, 50-175W MH
BallastWattage / Source Voltage
05 50W07 70W10 100W15 150W17 175W
S HPSM MH
RN Reactor NormalPower Factor
RH Reactor HighPower Factor
XN High Reactance/Lag NPFXH High Reactance/Lag HPFCA CWA Auto-RegCT CWI
Refer to ballast matrix on page 104for compatibility.
120 120V208 208V240 240V277 277V347 347V480 480V
MT1 Multi-tap Wired 120VMT2 Multi-tap Wired 240VMT7 Multi-tap Wired 277VDT2 Dual Tap 120/240
Wired 240
Distribution
RO No Internal Refractor
R3 Type III1
R5 Type V1
Options
86 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
P R O D U C T O V E R V I E W
Features:Die-cast aluminum housing and spun aluminum hood for long-life performance
Optical assembly designed for maximum performance
Multi-gasketing to provide weatherproof protection of optical assembly for fullillumination performance
Hinged hood and captive screw latching provision afford quick, easy access toelectrical and optical area for relamping or servicing
Available with two different style hoods and an added scroll option for a moredecorative look
Cone mounting fitter with three set screws allows secure installation to polesizes 2-3/8" or 3" O.D.
Refractor available in tempered glass, acrylic and polycarbonate
Available in a variety of IES light distributions patterns
E39 mogul base socket standard
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.16
Suitable for -30°C MH / -40°C HPS
Applications:StreetscapesWalkwaysPathwaysParks
DIMENSIONSDIMENSIONS
Effective Projected Area (EPA)The EPA for the Contempo Series 245 is 1.3 sq. ft.Approx. Wt. = 32 lbs.
Effective Projected Area (EPA)The EPA for the Decorative Scroll Option is 1.8 sq. ft.Approx. Wt. = 32 lbs.
ContempoSeries 24550-400W HPS, 70-400 MH
PREFERRED SELECTION CATALOG NUMBERS
245 10S RN 120 R5 AY245 15S RN 120 R5 AY245 25S CA MT1 R5 GL245 15S CA MT1 R5 AY
SCROLL DESIGN OPTION
87Product Guide
O R D E R I N G I N F O R M A T I O NExample: 2 4 5 1 0 S R N 1 2 0 R 3 G L S D P C
O R D E R I N G I N F O R M A T I O N
ContempoSeries 245
50-400W HPS, 70-400W MH
245 ContempoPost Top
05 50W07 70W10 100W13 100/150 Wired 10014 100/150 Wired 15015 150W17 175W25 250W40 400W
DistributionBallastWattage / SourceSeries
R2 Type IIR3 Type IIIR5 Type V
RN Reactor NormalPower Factor
RH Reactor HighPower Factor
XN High Reactance / Lag Normal Power Factor
XH High Reactance / Lag High Power Factor
CA CWA AutotransformerCT CWI AutotransformerSC SCWA
MR Mag Reg (3 coil)
Refer to ballast matrix onpage 105 for compatibility.
S HPSM MH
Notes:
1 Other colors available, please contact your localAmerican Electric Lighting representative
2 Voids UL/CSA not available in MT, TT, DT, voltages
3 PC, SH not available with NR option4 Available in HPS only5 Limited availability, please contact your local
American Electric Lighting representative6 Available in 250W maximum7 Available in 250W and 400W HPS and MH8 T3 option only available with 240, 480, DT2, DT4, MT29 Scroll color must be specified
Voltage
120 120V208 208V240 240V277 277V480 480V
MT1 Multi-tap Wired 120VMT2 Multi-tap Wired 240VMT7 Multi-tap Wired 277VTT3 Tri-tap Wired 347VDT2 Dual Tap 120/240 wired 240V5T4 5-tap Wired 480V7
GL GlassAY Acrylic6
PY Polycarbonate6
Refer to optical matrix below forcompatibility
Optics
Paint1
(blank) Gray (standard)BK Black
WH WhiteBZ Bronze
Terminal Block(blank) Terminal Block (standard)
T2 Wired to L1 & L2 PositionsT3 3 Wire Operation (L1, N, L2 Position)8
ListingUL UL ListedCS CSA Certified
Fusing2
SF Single Fuse (120, 277, 347V)DF Double Fuse (208, 220, 240, 480V)
Photocontrol Receptacle(blank) NEMA Photocontrol Receptacle
(standard)NR No Photocontrol Receptacle3
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
Starter4
(blank) Open Board (standard)EC Encapsulated Plug-inOP Open Plug-in
Options
Hood Style (see line art)(blank) Style A
SD Style D
Misc.PC Photocontrol Included per
Voltage Specified3
SS Stainless Steel Hardware5H 50 Hertz Ballast Cycle5
NL NEMA LabelDD Decorative Scroll Design9
SH Shorting Cap3
R2 AY R3 AY R5 AY R2 PY R3 PY R5 PY R2 GL R3 GL R5 GL05S � � � � � � � � �07S � � � � � � � � �10S � � � � � � � � �15S � � � � � � � � �20S � � � � � � � � �25S � � � � � � � � �31S - - - - - - � � �40S - - - - - - � � �17M � � � � � � � � �25M � � � � � � � � �40M - - - - - - � � �
Optic Distribution
88 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
TwistPackSeries TWT50-250W HPS, 70-250W MH
P R O D U C T O V E R V I E W
DIMENSIONS
Features:Unique locking type feature with locking screw that allows easy removal ofoptical assembly from slipfitter casting
Slipfitter casting houses ballast. It will fit over a post having top diameter of3-1/2” (4”O.D.) or 3” (3-1/2”O.D.)
Slipfitter casting is secured to post by three Allen-head locking screws
Some components of the ballast (e.g. capacitors and/or ignitors) depending onwattage or type, may extend below the slipfitter casting and may have to fit inthe top of the pole
Aluminum hood covers are either 24” or 28” diameter
Refractors offered in IES Type II, and V distributions
Available in polycarbonate or acrylic refractors
Mogul base socket
Natural aluminum finish is standard, other colors available
NEMA type photocell receptacle is standard
CSA certified option available
All electrical components warranted by American Electric Lighting's 6-yearguarantee
Complies with ANSI: C136.2, C136.10, C136.15, C136.16
Applications:Shopping mallsParks CampusesResidential streetsCondominiumsWalkways
Effective Projected Area (EPA)The EPA for the TwistPack H4 Hood is 1.40 sq. ft.The EPA for the TwistPack H8 Hood is 1.28 sq. ft.Approx. Wt. = 41 lbs.
PREFERRED SELECTION CATALOG NUMBERS
TWT 10S RN 120 R5 AY H8 CS NR ECTWT 15S RN 120 R5 AY H8 CS NR EC
H4 HOOD H8 HOOD
89Product Guide
TwistPackSeries TWT
50-250W HPS, 70-250W MH
O R D E R I N G I N F O R M A T I O N
TWT TwistPack 05 50W07 70W10 100W15 150W17 175W25 250W
DistributionBallastWattage / SourceSeries
R2 Roadway Type IIR5 Type V
CA CWA Autotransformer
CT CWIAutotransformer
RH Reactor High Power Factor
RN Reactor Normal Power Factor
XH High Reactance/LagHigh Power Factor
XN High Reactance/LagNormal Power Factor
Refer to ballast matrix onpage 105 for compatibility.
M Metal HalideS HPS
Voltage
120 120V208 208V240 240V277 277V347 347V480 480V
DT2 Dual Tap 120/240 Wired 240MT1 Multi-tap Wired 120MT2 Multi-tap Wired 240MT7 Multi-tap Wired 2775T4 5-tap Wired 4806
AY AcrylicPY Polycarbonate1
Optics
Options
PaintUP Unpainted (standard)BK BlackBZ BronzeGY Gray
WH White
Terminal BlockT2 Wired to L1 & L2 PositionsT3 3 Wire Operation (L1, N, L2 Position)4
ListingCS CSA Certified
Supply WireP Pre-wired to Terminal BlockS Supply Wire Included in Carton
See page 118.
Photocontrol Receptacle(blank) NEMA Photocontrol
Receptacle (standard)NR No Photocontrol Receptacle3
LampLC Lamp Included, ClearLD Lamp Included, Deluxe/Coated
Starter5
(blank) Open Board (standard)EC Encapsulated Plug-inOP Open Plug-in
Misc.PC Photocontrol Included per
Voltage Specified3
NL NEMA LabelSH Shorting Cap3
SS Stainless Steel Hardware
Example: T W T 1 5 S R N 1 2 0 R 5 A Y H 8
H4 24” hood2
H8 28” hood
Hood
Notes:
1 PY available in HPS only2 H4 available in 175W and below3 PC and SH not available with NR option4 T3 option only available with 240, 480, DT2, DT4, MT25 HPS only6 Available in 250W
P R O D U C T O V E R V I E W
90 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
Features:INSTALLATION The post shall be provided with four, hot-dipgalvanized L-type anchor bolts to be installed on an 10" - 12"diameter bolt circle. A door shall be provided in the base foranchorage and wiring access. A grounding screw shall beprovided inside the base opposite the door.
MATERIALS The base shall be heavy wall, copper free, castaluminum produced from certified ASTM 356.1 ingot per ASTMB-179-95a or ASTM B26-95. The straight shafts shall be extrudedfrom aluminum, ASTM 6061 alloy, heat treated to a T6 temper. Thetapered shaft shall be extruded from aluminum, ASTM 6063 alloy,spun to a tapered shape, then heat treated to a T6 temper. Allhardware shall be tamper resistant stainless steel. Anchor bolts tobe completely hot-dip galvanized.
CONSTRUCTION The shaft shall be double welded to the basecasting and shipped as one piece for maximum structural integrity.The shaft shall be circumferentially welded inside the base castingat the top of the access door, and externally where the shaft exitsthe base. All exposed welds below 8’ shall be ground smooth. Allwelding shall be per ANSI/AWS D1.2-90. All welders shall becertified per Section 5 of ANSI/AWS D1.2-90.
DIMENSIONS The post shall be 8’- 16’ in height (depending oncustomer selection) with a 16" diameter base. The shaft diametervaries depending on shaft type selected. (See page 91.) At the topof the post, an integral 3" O.D. x 3" tenon with a transitional donutshall be provided for luminaire mounting.
Decorative PolesChadsworth SeriesCast Aluminum Posts Extruded Shaft
Applications:Streetscapes
Walkways
Pathways
Parks
91Product Guide
O R D E R I N G I N F O R M A T I O N
DIMENSIONS
Example: P X C H 1 6 1 2 S 5 A N B K A E L
OptionsShaft TypeHeightSeries
_________ Receptacles_________ Banner Arms_________ Flagpole Holders_________ Signage
(See Accessories section or contactyour local AEL representative.)
8’10’12’14’16’1
Notes:
1 16' height not available for S4, F4, or T4 (any4"Ø) Shaft Type
2 For finish specifications and color options, please contact your local American Electric Lighting representative
Finish2
AELManufacturing Code
S4 Smooth 4"ØS5 Smooth 5"ØF4 Fluted 4"ØF5 Fluted 5"ØT4 Tapered 4"-3"ØT5 Tapered 5"-3"Ø
ANBK BlackANDB BronzeANDG Dark Green
CM Custom MatchCS Custom Select
RAL colors
PX CH16 Chadsworth AEL
Decorative PolesChadsworth Series
Cast Aluminum Posts Extruded Shaft
P R O D U C T O V E R V I E W
92 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
Decorative PolesNew Albany SeriesCast Aluminum Posts Extruded Shaft
Features:INSTALLATION The post shall be provided with four, hot-dipgalvanized L-type anchor bolts to be installed on an 12" diameter boltcircle. A door shall be provided in the base for anchorage and wiringaccess. A grounding screw shall be provided inside the base oppositethe door.
MATERIALS The base shall be heavy wall, copper free, cast aluminumproduced from certified ASTM 356.1 ingot per ASTM B-179-95a orASTM B26-95. The straight shafts shall be extruded from aluminum,ASTM 6061 alloy, heat treated to a T6 temper. The tapered shaft shallbe extruded from aluminum, ASTM 6063 alloy, spun to a tapered shape,then heat treated to a T6 temper. All hardware shall be tamperresistant stainless steel. Anchor bolts to be completely hot-dipgalvanized.
CONSTRUCTION The shaft shall be double welded to the base castingand shipped as one piece for maximum structural integrity. The shaftshall be circumferentially welded inside the base casting at the top ofthe access door, and externally where the shaft exits the base. Allexposed welds below 8’ shall be ground smooth. All welding shall beper ANSI/AWS D1.2-90. All welders shall be certified per Section 5 ofANSI/AWS D1.2-90.
DIMENSIONS The post shall be 8’- 16’ in height (depending oncustomer selection) with a 16" diameter base. The shaft diametervaries depending on shaft type selected. (See page 93.) At the top ofthe post, an integral 3" O.D. x 3" tenon with a transitional donut shall beprovided for luminaire mounting.
Smooth Fluted
Tapered
Applications:Streetscapes
Walkways
Pathways
Parks
93Product Guide
O R D E R I N G I N F O R M A T I O N
Example: P X N Y 1 7 1 2 S 5 A N B K A E L
Decorative PolesNew Albany Series
Cast Aluminum Posts Extruded Shaft
DIMENSIONS
Shaft TypeHeightSeries
8’10’12’14’16’1
S4 Smooth 4"ØS5 Smooth 5"ØF4 Fluted 4"ØF5 Fluted 5"ØT4 Tapered 4"-3"ØT5 Tapered 5"-3"Ø
PX NY17 New Albany
Notes:
1 16' height not available for S4, F4, or T4 (any 4"Ø) Shaft Type.
2 For finish specifications and color options, please contact your local American Electric Lighting representative.
Options
_________ Receptacles_________ Banner Arms_________ Flagpole Holders_________ Signage
(See Accessories section or contactyour local AEL representative.)
Finish2
AELManufacturing Code
ANBK BlackANDB BronzeANDG Dark Green
CM Custom MatchCS Custom Select
RAL colors
P R O D U C T O V E R V I E W
94 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
Features:INSTALLATION The post shall be provided with four, hot-dipgalvanized L-type anchor bolts to be installed on an 9.5" diameterbolt circle. A door shall be provided in the base for anchorage andwiring access. A grounding screw shall be provided inside the baseopposite the door.
MATERIALS The base shall be heavy wall, copper free, castaluminum produced from certified ASTM 356.1 ingot per ASTMB-179-95a or ASTM B26-95. The straight shafts shall be extrudedfrom aluminum, ASTM 6061 alloy, heat treated to a T6 temper. Thetapered shaft shall be extruded from aluminum, ASTM 6063 alloy,spun to a tapered shape, then heat treated to a T6 temper. Allhardware shall be tamper resistant stainless steel. Anchor bolts tobe completely hot-dip galvanized.
CONSTRUCTION The shaft shall be double welded to the basecasting and shipped as one piece for maximum structural integrity.The shaft shall be circumferentially welded inside the base castingat the top of the access door, and externally where the shaft exitsthe base. All exposed welds below 8’ shall be ground smooth. Allwelding shall be per ANSI/AWS D1.2-90. All welders shall becertified per Section 5 of ANSI/AWS D1.2-90.
DIMENSIONS The post shall be 8’- 14’ in height (depending oncustomer selection) with a 16" diameter base. The shaft diametervaries depending on shaft type selected. (See page 95.) At the top ofthe post, an integral 3" O.D. x 3" tenon with a transitional donut shallbe provided for luminaire mounting. .
Applications:Streetscapes
Walkways
Pathways
Parks
Decorative PolesStatesboro SeriesCast Aluminum Posts Extruded Shaft
95Product Guide
O R D E R I N G I N F O R M A T I O N
Example: P X S 9 1 2 S 4 A N B K A E L
DIMENSIONS
Decorative Poles Statesboro Series
Cast Aluminum Posts Extruded Shaft
Shaft TypeHeightSeries
8’10’12’14’
S4 Smooth 4"ØF4 Fluted 4"ØT4 Tapered 4"-3"Ø
PX S9 Statesboro
Options
_________ Receptacles_________ Banner Arms_________ Flagpole Holders_________ Signage
(See Accessories section or contactyour local AEL representative.)
Finish2
AELManufacturing Code
ANBK BlackANDB BronzeANDG Dark Green
CM Custom MatchCS Custom Select
RAL colors
P R O D U C T O V E R V I E W
96 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
Features:INSTALLATION The post shall be provided with four, hot-dipgalvanized L-type anchor bolts to be installed on an 12" diameter boltcircle. A door shall be provided in the base for anchorage and wiringaccess. A grounding screw shall be provided inside the base oppositethe door.
MATERIALS The base shall be heavy wall, copper free, cast aluminumproduced from certified ASTM 356.1 ingot per ASTM B-179-95a or ASTM B26-95. The straight shafts shall beextruded from aluminum, ASTM 6061 alloy, heat treated to a T6 temper.The tapered shaft shall be extruded from aluminum, ASTM 6063 alloy,spun to a tapered shape, then heat treated to a T6 temper. Allhardware shall be tamper resistant stainless steel. Anchor bolts to becompletely hot-dip galvanized.
CONSTRUCTION The shaft shall be double welded to the base castingand shipped as one piece for maximum structural integrity. The shaftshall be circumferentially welded inside the base casting at the top ofthe access door, and externally where the shaft exits the base. Allexposed welds below 8’ shall be ground smooth. All welding shall beper ANSI/AWS D1.2-90. All welders shall be certified per Section 5 ofANSI/AWS D1.2-90.
DIMENSIONS The post shall be 8’- 16’ in height (depending oncustomer selection) with a 16" diameter base. The shaft diametervaries depending on shaft type selected. (See page 97.) At the top ofthe post, an integral 3" O.D. x 3" tenon with a transitional donut shall beprovided for luminaire mounting. .
Applications:Streetscapes
Walkways
Pathways
Parks
Decorative PolesWaycross SeriesCast Aluminum Posts Extruded Shaft
97Product Guide
O R D E R I N G I N F O R M A T I O N
Example: P X W 1 7 1 2 S 5 A N B K A E L
DIMENSIONS
Shaft TypeHeightSeries
8’10’12’14’16’1
AELManufacturing Code
S4 Smooth 4"ØS5 Smooth 5"ØF4 Fluted 4"ØF5 Fluted 5"ØT4 Tapered 4"-3"ØT5 Tapered 5"-3"Ø
PX W17 Waycross AEL
Notes:
1 16' height not available for S4, F4, or T4 (any 4"Ø) Shaft Type.
2 For finish specifications and color options, please contact your local American Electric Lighting representative.
Options
_________ Receptacles_________ Banner Arms_________ Flagpole Holders_________ Signage
(See Accessories section or contactyour local AEL representative.)
Finish2
ANBK BlackANDB BronzeANDG Dark Green
CM Custom MatchCS Custom Select
RAL colors
Decorative PolesWaycross Series
Cast Aluminum Posts Extruded Shaft
P R O D U C T O V E R V I E W
98 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
Receptacle with Wet Location While Closed Cover
Catalog part # FG-S
SPECIFICATIONS A 20 amp, 125 volt, ground fault circuitinterrupter duplex receptacle shall be mounted in the post.The receptacle shall be UL Listed according to E-48380 andUL 943 Class A and UL 498. The receptacle shall have a castaluminum, UL Listed cover that is suitable for wet locationswhile not in use. The receptacle and cover shall mount to anoutlet opening, in the post shaft, with a gasket and stainlesssteel screws.
Receptacle with Small, In-Use Wet Location Cover
Catalog part # FGIUS-S
SPECIFICATIONS A 20 amp, 125 volt, ground fault circuitinterrupter duplex receptacle shall be mounted in the post.The receptacle shall be UL Listed according to E-48380 andUL 943 Class A and UL 498. The receptacle shall have a castaluminum, lockable, UL Listed cover that is suitable for wetlocations while in use and complies with NEC Article 410-57(b). The cover shall accept most common cord sets up to3/8” diameter (14/3). The receptacle and cover shall mount toan outlet opening, in the post shaft, with a gasket andstainless steel screws.
Receptacle with Large, In-Use Wet Location Cover
Catalog part # FGIUL-S
SPECIFICATIONS A 20 amp, 125 volt, ground fault circuitinterrupter duplex receptacle shall be mounted in the post.The receptacle shall be UL Listed according to E-48380 andUL 943 Class A and UL 498. The receptacle shall have a castaluminum, lockable, UL Listed cover that is suitable for wetlocations while in use and complies with NEC Article 410-57(b). The cover shall accept most common cord sets up to1/2” diameter (12/3). The receptacle and cover shall mount toan outlet opening, in the post shaft, with a gasket andstainless steel screws.
Decorative PolesWeatherproof ReceptaclesExternal, Post Shaft Location
Features:INSTALLATION External receptacles are typically installed above pedestrian level for special event uses and decorative seasonal lighting.
CONSTRUCTION Ground fault circuit interrupter receptacles. Test/Reset buttons on face of receptacles. All cast aluminum covers,not plastic. (Paintable to match post color). Weatherproof “While-in-Use” covers in two sizes.
99Product Guide
P R O D U C T O V E R V I E W
Decorative PolesWeatherproof Receptacles
External, Post Shaft Location
Features:INSTALLATION Internal receptacles are typically installed for use by authorized personnel for special events and owner maintenance purposes.
CONSTRUCTION Ground fault circuit interrupter receptacles. Test and reset buttons on face of receptacles. All cast aluminum covers, not plastic.
Receptacle with Weatherproof Box and Cover
Catalog part # RB/GFI/WPC
SPECIFICATIONS A 20amp, 125 volt, ground fault circuit interrupter duplex receptacle shall be mounted inside the post base, facing toward theaccess door. The receptacle shall be UL Listed according to E-48380 and UL 943 Class A and UL 498. The receptacle shall be mounted in a castaluminum box and cover that is suitable for wet locations while not in use. The receptacle and cover shall mount to a outlet box with a gasketand stainless steel screws.
100 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
B A L L A S T M A T R I C E S
Decorative and Post Top Lighting
Valiant
Valiant continued
American Revolution Deluxe Series
Watts 120 208 240 277 347 480 DT2 MT105S RH, RN - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XH, XN, CA, CT XH, XN, CA, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT XN, XH, CA XH, XN, CA, CT XH, XN, CA, CT10M XH, XN, CA XN, XH XN, XH XN, XH, CA XN, XH - XN, XH XN, XH13S RH, RN - - - - - - -14S RH, RN - - - - - - -15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XH, XN, CA, CT15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH17M CA CA CA CA CA CA CA CA
Watts MT2 MT7 TT305S - -07S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT07M XN, XH XN, XH XN, XH10S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT10M XN, XH XN, XH XN, XH13S - - -14S - - -15S XN, XH, CA, CT XN, XH, CA, CT -15M XN, XH XN, XH XN, XH17M CA CA CA
American Revolution Deluxe Series continued
Watts 120 208 240 277 347 480 DT2 MT105S RN, RH - - - - - - -07S CA, CT, RH, RN XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XN, XH, CA, CT XN, XH, CA, CT 07M XH, XN XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT XN, XH, CA XH, XN, CA, CT XN, XH, CA, CT10M XH, XN, CA XN, XH XN, XH XN, XH, CA XN, XH - XN, XH XN, XH13S RN, RH - - - - - - -15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XN, XH, CA, CT15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH17M CA CA CA CA CA CA CA CA20S CA CA RN, RH, CA CA - CA CA CA25S XN, XH, CA CA XN, XH, CA CA CA CA XN, XH, CA CA25M CA CA CA CA - CA CA CA
Watts MT2 MT7 TT305S - - -07S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT07M XN, XH XN, XH XN, XH10S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT10M XN, XH XN, XH XN, XH13S - - -15S XN, XH, CA, CT XN, XH, CA, CT -15M XN, XH XN, XH XN, XH17M CA CA CA20S CA CA CA25S CA CA CA, CT25M CA CA CA, CT
101Product Guide
B A L L A S T M A T R I C E S
Decorative and Post Top Lighting
American Revolution Series 247
Watts 120 208 240 277 347 480 DT2 MT105S RH, RN - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XH, XN, CA, CT XH, XN, CA, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT XN, XH, CA XH, XN, CA, CT XH, XN, CA, CT10M XH, XN, CA XN, XH XN, XH XN, XH, CA XN, XH - XN, XH XN, XH13S RH, RN - - - - - - -14S RH, RN - - - - - - -15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XH, XN, CA, CT15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH17M CA CA CA CA CA CA CA CA
Watts MT2 MT7 TT305S - -07S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT07M XN, XH XN, XH XN, XH10S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT10M XN, XH XN, XH XN, XH13S - - -14S - - -15S XN, XH, CA, CT XN, XH, CA, CT -15M XN, XH XN, XH XN, XH17M CA CA CA
American Revolution Series 247 continued
American Revolution Cutoff Series 247Watts 120 208 240 277 347 480 DT2 MT105S RH, RN - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XH, XN, CA, CT XH, XN, CA, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT XN, XH, CA XH, XN, CA, CT XH, XN, CA, CT10M XH, XN, CA XN, XH XN, XH XN, XH, CA XN, XH - XN, XH XN, XH13S RH, RN - - - - - - -14S RH, RN - - - - - - -15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XH, XN, CA, CT15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH17M CA CA CA CA CA CA CA CA
Watts MT2 MT7 TT305S - - -07S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT07M XN, XH XN, XH XN, XH10S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT10M XN, XH XN, XH XN, XH13S - - -14S - - -15S XN, XH, CA, CT XN, XH, CA, CT -15M XN, XH XN, XH XN, XH17M CA CA CA
American Revolution Cutoff Series 247 continued
102 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
B A L L A S T M A T R I C E S
Decorative and Post Top Lighting
Wattage 120 208 240 277 347 480 DT1 MT105S RN,RH - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XN, XH, CA, CT XN, XH, CA, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT XN, XH, CA XN, XH, CA, CT XN, XH, CA, CT10M XN, XH, CA XN, XH XN, XH XN, XH, CA XN, XH - XN, XH XN, XH15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XN, XH, CA, CT15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH17M CA CA CA CA CA CA CA CA
Watts 120 208 240 277 480 DT2 MT1 MT2 MT705S RN - - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA CA XN, XH, CA, CT CA, CT CA, CT CA, CT10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT CA N, XH, CA, CT CA, CT CA, CT CA, CT15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT CA XN, XH, CA, CT CA, CT CA, CT CA, CT17M CA CA CA CA CA - - CA CA
Bainbridge Series 870
Georgian Series GRP
Georgian Series GRP continued
Wattage MT2 MT7 TT305S - - -07S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT07M XN, XH XN, XH XN, XH10S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT10M XN, XH XN, XH XN, XH15S XN, XH, CA, CT XN, XH, CA, CT -15M XN, XH XN, XH XN, XH17M CA CA CA
Marietta Series LMD
Wattage 120 208 240 277 347 480 DT2 MT105S RN,RH - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XN, XH, CA, CT XN, XH, CA, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT XN, XH, CA XN, XH, CA, CT XN, XH, CA, CT10M XN, XH, CA XN, XH XN, XH XN, XH, CA XN, XH - XN, XH XN, XH15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XN, XH, CA, CT15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH17M CA CA CA CA CA CA CA CA25S XN, XH, CA CA XN, XH, CA CA CA CA XN, XH, CA CA25M CA CA CA CA - CA CA CA
Marietta Series LMD continued
Wattage MT2 MT7 TT305S - - -07S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT07M XN, XH XN, XH XN, XH10S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT10M XN, XH XN, XH XN, XH15S XN, XH, CA, CT XN, XH, CA, CT -15M XN, XH XN, XH XN, XH17M CA CA CA25S CA CA CA, CT25M CA CA CA, CT
103Product Guide
B A L L A S T M A T R I C E S
Decorative and Post Top Lighting
Sumter Series LSH
Sumter Series LSH continued
Wattage 120 208 240 277 347 480 DT2 MT105S RN,RH - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XN, XH, CA, CT XN, XH, CA, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT XN, XH, CA XN, XH, CA, CT XN, XH, CA, CT10M XN, XH, CA XN, XH XN, XH XN, XH, CA XN, XH - XN, XH XN, XH15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XN, XH, CA, CT15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH17M CA CA CA CA CA CA CA CA25S XN, XH, CA CA XN, XH, CA CA CA CA XN, XH, CA CA25M CA CA CA CA - CA CA CA
Wattage MT2 MT7 TT305S - - -07S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT07M XN, XH XN, XH XN, XH10S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT10M XN, XH XN, XH XN, XH15S XN, XH, CA, CT XN, XH, CA, CT -15M XN, XH XN, XH XN, XH17M CA CA CA25S CA CA CA, CT25M CA CA CA, CT
Cresthill Series LCR - Classic, Sphere and Centennial
Wattage 120 208 240 277 347 480 DT2 MT105S RN,RH - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XN, XH, CA, CT XN, XH, CA, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT XN, XH, CA XN, XH, CA, CT XN, XH, CA, CT10M XN, XH, CA XN, XH XN, XH XN, XH, CA XN, XH - XN, XH XN, XH15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XN, XH, CA, CT15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH17M CA CA CA CA CA CA CA CA
Cresthill Series LCR - Classic, Sphere and Centennial continued
Wattage MT2 MT7 TT305S - - -07S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT07M XN, XH XN, XH XN, XH10S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT10M XN, XH XN, XH XN, XH15S XN, XH, CA, CT XN, XH, CA, CT -15M XN, XH XN, XH XN, XH17M CA CA CA
104 Product Guide For photometric information, visit our website,www.americanelectriclighting.com
B A L L A S T M A T R I C E S
Decorative and Post Top Lighting
Cresthill Series LCR - Glass
Cresthill Series LCR - Glass continued
Wattage 120 208 240 277 347 480 DT2 MT105S RN,RH - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XN, XH, CA, CT XN, XH, CA, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT XN, XH, CA XN, XH, CA, CT XN, XH, CA, CT10M XN, XH, CA XN, XH XN, XH XN, XH, CA XN, XH - XN, XH XN, XH15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XN, XH, CA, CT15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH17M CA CA CA CA CA CA CA CA25S XN, XH, CA CA XN, XH, CA CA CA CA XN, XH, CA CA25M CA CA CA CA - CA CA CA
Wattage MT2 MT7 TT305S - - -07S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT07M XN, XH XN, XH XN, XH10S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT10M XN, XH XN, XH XN, XH15S XN, XH, CA, CT XN, XH, CA, CT -15M XN, XH XN, XH XN, XH17M CA CA CA25S CA CA CA, CT25M CA CA CA, CT
Watts 120 208 240 277 347 480 DT2 MT1 MT2 MT7 TT305S RH,RN - - - - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH XN, XH XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA XN, XH, CT XN, XH, CA XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT10M XN, XH, CA XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH XN, XH XN, XH XN, XH15S RH, RN, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT -15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH XN, XH XN, XH XN, XH17M CA CA CA CA CA CA CA CA CA CA CA
Branson LBR
Watts 120 208 240 277 347 480 DT2 MT1 MT2 MT7 TT305S RH,RN - - - - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH XN, XH XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA XN, XH, CT XN, XH, CA XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT10M XN, XH, CA XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH XN, XH XN, XH XN, XH15S RH, RN, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT -15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH XN, XH XN, XH XN, XH17M CA CA CA CA CA CA CA CA CA CA CA
Lexington LLX
105Product Guide
B A L L A S T M A T R I C E S
Decorative and Post Top Lighting
Wattage 120 208 240 277 347 480 DT2 MT105S RN,RH - - - - - - -07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XN, XH, CA, CT XN, XH, CA, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT XN, XH, CA XN, XH, CA, CT XN, XH, CA, CT10M XN, XH, CA XN, XH XN, XH XN, XH, CA XN, XH - XN, XH XN, XH15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA - XN, XH, CA, CT15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH XN, XH17M CA CA CA CA CA CA CA CA20S CA CA RN, RH, CA CA - CA CA CA 25S XN, XH, CA CA XN, XH, CA CA CA CA XN, XH, CA CA25M CA CA CA CA CA, CT, SC CA, SC CA, CT, SC CA, SC
Wattage MT2 MT7 TT3 5T405S - - - -07S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT -07M XN, XH XN, XH XN, XH -10S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT -10M XN, XH XN, XH XN, XH -15S XN, XH, CA, CT XN, XH, CA, CT - -15M XN, XH XN, XH XN, XH -17M CA CA CA -20S CA CA CA -25S CA CA CA, CT CA25M CA, SC CA, SC CA, CT CA
TwistPack Series TWT
TwistPack Series TWT continued
Contempo Series 245
Contempo Series 245 continued
Watts 120 208 240 277 347 480 DT205S RN, RH - - - - - - 07S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH XN, XH XN, XH, CA, CT07M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH10S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT XN, XH, CA XN, XH, CA, CT10M XN, XH, CA XN, XH XN, XH XN, XH, CA XN, XH - XN, XH13S RN, RH - - - - - -14S RN, RH - - - - - -15S RN, RH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - XN, XH, CA -15M XN, XH XN, XH XN, XH XN, XH XN, XH - XN, XH17M CA CA CA CA CA CA CA20S CA CA RN, RH, CA CA - CA CA25S XN, XH, CA CA XN, XH, CA CA CA CA XN, XH, CA25M CA CA CA CA CA, CT, SC CA, SC CA, CT, SC31S - - - - - - -40S CA, CT CA, CT CA, CT CA, CT CA CA CA, CT40M CA, CT CA CA, CT CA - CA, SC CA, CT
Watts MT1 MT2 MT7 TT3 5T405S - - - - -07S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT -07M XN, XH XN, XH XN, XH XN, XH -10S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT XN, XH, CT -10M XN, XH XN, XH XN, XH XN, XH -13S - - - - -14S - - - - -15S XN, XH, CA, CT XN, XH, CA, CT XN, XH, CA, CT - -15M XN, XH XN, XH XN, XH XN, XH -17M CA CA CA CA -20S CA CA CA CA -25S CA CA CA CA, CT CA25M CA, SC CA, SC CA, SC CA, CT CA31S - - - - -40S - - - - CA40M CA CA CA - CA