DECT

ARIA IP - 60

Anton Hattingh

• Overview

• Hardware

• DECT Configuration

• DECT Registration

• DECT Registration Attendant

• DECT registration PC Admin

CONTENT

OVER VIEW• WDIB4 Board should be installed instead of E1HB8

Hardware

GDC 400B

GDC 600B

GDC 400H

WDIB 4

ARIA IP - 60

GDC 450H

DECT Configuration

A WDIB4 (4WTI + 4DKT I/F)/System Max. 4 Cells/System Max. simultaneous 4/6 Calls/Cell Max. simultaneous 16 Calls/System Supports DECT GAP standards Max. Base station distance from WDIB4 : 600m E1 Interface between WDIB4 and base station

ARIA IP - 60

600m4 Calls per Base

GDC 400/450HMax 16 DECT Handsets

WDIB4

GDC 400/600 B

NOTE:The WDIB4 can only be used on the BKSU

DECT Registration

There is two ways to register a DECT handset to the ARIA IP - 60 system:

DECT registration via PC Admin

DECT registration via Attendant Terminal

NOTE:The Park number and AC code can only be programmed into the system thru the Attendant terminal.

DECT Registration Attendant 1/2

Park code and AC code programming

1. Press TRANS/PGM 0 / #

2. Press Flex button 6 Park code programme

3. Type in Park code (Park code will be displayed on the MBU of BKSU)

4. Press hold/Save to save Park code

5. Press Flex button 3 AC code programming

6. This can be any code (1234)

7. Press hold/Save to save AC code

8. Press Flex button 1 Enter STA No: 112

9. Enter Phone type (GDC 400/GDC 450) type 3

10. Press the Hold/Save button to start DECT registration.

NOTE:Type 1: DECT handsets (33X) GDC 335HType 2:DECT handsets (ST-GAP) any Standard GAP complaint handsetType 3:DECT handset (34x/4xx) GDC 345H and GDC 400/450 H

DECT Registration Attendant 2/2

DECT handset registration

1. Press the Menu Button on the GDC 450H handset

2. With the Navigational keys scroll to your right until Phone Registration

3. Press OK

4. Scroll down to Subscription

5. Press OK

6. Select Base 1

7. Handset will Display the Park number of System

8. Press OK

9. Enter AC code 1234

10.Press OK

11. On the Attendant Terminal it will show Subscribed: SUCCESS

12.And the GDC 450H Handset will confirm subscription.

1. Open PC Admin

2. Select Supplementary services

3. Select subscribe

DECT Registration PC Admin 1/2

4. Type in STA no: 112

5. Select Type of Handset

6. Press Execute

7. Follow All steps of DECT handset registration

DECT Registration PC Admin 2/2