Deliv Note

8/13/2019 Deliv Note

1/47

+---------------------------------------------------------------------------+| OFFICIAL B11 MR3 ED1.3 TDM EVOLIUM BTS SW FOR SYSTEM INTEGRATION || || Delivery request number: BTS.EVOLIUM_TDM.11_0.00G || Created : 25.11.2011 Design Center : BTS-CC || by : Rene Kenzler Due Date : 25.11.2011 ||---------------------------------------------------------------------------|| Package : EVOLIUM COMMON BTS SOFTWARE || Design Center Reference : BM0SAZG0.00G || B10 SW Level : B10 MR2 ED7 (BMXSAXP3.03P) || B11 MR1 ED1 SW Level : B11 MR1 ED1 (BM0SAZZ2.02Z) || B11 MR1 ED2 SW Level : B11 MR1 ED2 (BM0SAZH8.08H) || B11 MR1 ED3 SW Level : B11 MR1 ED3 (BM0SAZJ0.20J) || B11 MR3 ED1.1 TDM SW Level : B11 MR3 ED1.1 (BM0SAZV0.40V) || B11 MR3 ED1.3 TDM SW Level : B11 MR3 ED1.3 (BM0SAZO1.31O) || B11 MR3 ED1.4 TDM SW Level : B11 MR3 ED1.4 (BM0SAZR0.60R) || Specifications : B11 EVOLIUM ||---------------------------------------------------------------------------||___________________________________________________________________________|

Known Restrictions:

=================== none

REMARK: ---------- This bts_commissioningPackage is valid for all B11 MReleases and editions This bts_commissioningPackage is delivered before tests at SSI-level are finished

|---------------------------------------------------------------------------|| Features || -------- || || Feature |supported with|| |BTS version || | || SUMX-HW8 - SUMX HW 8 Variante "CAAB" Support from |00A || Opertional SW point of view | |

| SUMX-HW8 - SUMX Origin SW:SUMX HW8 Variante "CAAB" |00A || failure correction | || Support of New Mc-TRX modules for GSM900E AABA |07W || Support of DPD |06W || Support of New Mc-TRX modules for GSM900E |06C || Support of New AGX modules for GSM900E and GSM1800 |06B || Antenna Hopping |06B || Randomisation of fill bits in L2 messages |06A || network sync. TSs (GPS) |06A || | |


2/47

|---------------------------------------------------------------------------|###################### SECTION FR, CR, RFD ##################################

|---------------------------------------------------------------------------|| A) SECTION FR || ------------- || || FR customer |FR/34 | Short Description |BTS | Comment || | | |Deliv.| || | | | | || | | | | ||---------------------------------------------------------------------------|| B) SECTION CR || ------------- || || FR customer |FR/34 | Short Description |BTS | Comment || | | |Deliv.| || | | | | ||3BKA20CBR306531| |OMC/BSC HW/SW File Format: |10A | || | |BTS SW MF - Return to B8 numbering| | || | | rules | | || | | | | |

|3BKA20CBR293268|295239|IP security: the BTS certificate |07B | || | |Name is filled with a MAC address.| | || | | | | ||3BKA20CBR294800|295251|L2 Filling Bits Randomization |07A | || | |amendment | | || | | | | ||3BKA20CBR219077|226684|BOP: OML-PRIORITY(BTS) is |06R | || | |configured into OMU.CPF | | || | | | | ||3BKA20CBR292106| |O&M Abis interface B11: support of|06O | || | | MC-modules: overbooking feature: | | || | |increase the maximum value of | | || | |additional power | | |

| | | | | ||3BKA20CBR286057|286783|BTS Alarm dictionary: subrack |06M/L | || | |power supply alarm is reported if | | || | |more than one board is impacted | | || | | | | ||3BKA55CBR283421|291391|RMS improvement: increase of the |06M | || | |42 BCCH-BSIC pairs limit | | || | | | | ||3BKA55CBR253059| |New AGX modules for GSM900E and |06B | || | |GSM1800 | | || | | | | ||3BKA20CBR244941|281561|O&M Abis interface B11: impact of |06B | || | |RFD 234691 Antenna hopping: TxDiv | | |

| | |capability and TxDiv usage are | | || | |reported during HW capability | | || | |update service; the antenna | | || | |hopping activation status | | || | |(enable/disable) is sent in CDM1. | | || | | | | ||3BKA20CBR253693|265321|B11 BOP: Impact of the RFD 241185:|06A | || | |Network synchronization of radio | | || | |timeslots | | || | | | | |


3/47

|3BKA20CBR251783|265319|O&M Abis interface: |06A | || | |-FN_OFFSET_Time_Synchro? | | || | |-Max-Allowed-Time-Deviation? | | || | |and -GPS-synchronised?added in B10| | || | |(+ NTP-synchronised + | | || | |PCM-synchronised in B11) in CDM4. | | || | |New command BTS-Synchro-Mode- | | || | |Display added in B11. | | || | | | | ||3BKA55CBR241185|241494|Network synchronization of radio |06A | || | |timeslots (B11 version) | | || | | | | ||3BKA20CBR258303|265331|BTP: randomisation of fill bits in|06A | || | |L2 messages (RFD253297) | | || | | | | ||3BKA20CBR257886|265317|LaPDm FS - Randomisation of fill |06A | || | |bits in L2 messages | | || | | | | ||3BKA55CBR253297|263524|Randomisation of fil bits in L2 |06A | || | |messages | | || | | | | ||3BKA20CBR259661|265352|O&M Abis interface B11: |06A | || | |Randomisation of fill bits in L2 | | || | |messages | | |

| | | | | || | | | | ||---------------------------------------------------------------------------|| C) SECTION RFD || ------------- || || RFD customer |RFD/34| Short Description |BTS | Comment || | | |Deliv.| || | | | | ||3BKA55CBR234691| |Antenna hopping |06B | || | | | | ||---------------------------------------------------------------------------|#############################################################################

Additional Modifications:=========================Please see module files below

#############################################################################| External Interfaces and Catalogs References || || 3BK 11204 0447 DSZZA Ed3rel || O&M ABIS Interface B11 || || 3BK 11203 0177 DSZZA Ed4rel || Layer 3 Message Dictionary - ABIS Interface Release B11 |

| || 3BK 11202 0524 DSZZA Ed1rel || GPRS MFS/BTS Interface M-EGCH stack Release B11 || || 3BK 11202 0505 DSZZA Ed2rel || System Information Management Release B11 || || 3BK 11203 0172 DSZZA Ed11rel || BSS Telecom Parameter B11 (BTP) || |


4/47

| 3BK 11204 0478 DSZZA Ed9rel || BSS O&M Parameters Catalogue B11 (BOP) || || 3BK 11202 0511 DSZZA Ed2rel || TC/BTS Interface Release B11 || || || || ||---------------------------------------------------------------------------|| EVOLIUM BTS Commissioning Software ||---------------------------------------------------------------------------|| Modifications added to the delivery : BM0SAZF0.00F || || Delivery content: || || Files modified for this Delivery are marked with an asterisk (*) || Files included in this Delivery but already delivered with a || previous delivery are marked with a plus (+) || || * BM0SAZG0.TXT 25.11.2011 Evolium BTS delivery note || BM0SAWN5.MSF 19.05.2005 768 b/Bin BTS masterfile (No enc) || * BM0SAZG0.SIL 25.11.2011 1221 b/Bin BTS masterfile source (No enc)|| + 00O2AZH8.DDL 23.11.2011 69120 b/Bin OMU-CPF |

| ANX3ATK6.DDL 23.11.2011 77568 b/Bin ANX Software 3 || FCPFAWB9.DDL 23.11.2011 256 b/Bin FU-CPF || SOMFAZA2.DDL 23.11.2011 314368 b/Bin OMU Firmware for G3/M4MS || SAMFXXE3.DDL 23.11.2011 5881344 b/Bin OMU Firmware for SUMX || SOMPAT03.DDL 23.11.2011 1280 b/Bin OMU Spf for G3/M4MS || SOMRXX05.DDL 23.11.2011 1536 b/Bin SUM O&M Firmware Launcher || * SOMSAZB8.DDL 23.11.2011 730624 b/Bin OMU Software for G3/M4MS || SUMPAZB1.DDL 23.11.2011 149760 b/Bin OMU Spf for G3.8 || * SUMSAZG5.DDL 23.11.2011 1328896 b/Bin OMU Software for G3.8/G4/M5M || || T1W2AV09.DDL 23.11.2011 203520 b/Bin A5/1 TRESW2 package || content :SCP extended AT : TATE0009 || DSP boot SW : TATD0012 |

| BED AT : TBAT4Z03 || BED operational : TBOP8X09 || CUL Resident SW : TCUL4Z05 || SCP SW2 : SCP2AI40 || || TCLFAD09.DDL 23.11.2011 281600 b/Bin Trans&Clock for G3 || TCLSAD09.DDL 23.11.2011 281344 b/Bin Trans&Clock for M4M-S || || + TSW3AZI3.DDL 23.11.2011 495360 b/Bin TRE SW3 package G3 || content :SCP SW3 : S33BT128 || Encoder : ENC3B224 || Decoder : DEC3B218 || Demodulator : DEM39102 |

| || U1W2AZA2.DDL 23.11.2011 239872 b/Bin A5/1 TRESW2 package || content :SCP extended AT : TATE1005 || DSP boot SW : TATD4003 || BED AT : TUAT0030 || BED operational : TUOPAX36 || SCP SW2 : SCP2AH11 || || + USW3AZJ3.DDL 23.11.2011 562944 b/Bin TRE SW3 package G4 / M5M || content :SCP SW3 : S33BT128 |


5/47

| Encoder : ENC4B224 || Decoder : DEC4B218 || Demodulator : DEM49110 || || * V1W3AZA5.DDL 23.11.2011 2027520 b/Bin TWIN-TRA SW A5/1 || || AGC3AZD1.DDL 23.11.2011 392448 b/Bin AGC SW || || * SAMSAZD9.DDL 23.11.2011 6312448 b/Bin OMU Software for SUMX || || * W0W1AZK4.DDL 23.11.2011 2361088 b/Bin NC-GSM SW3 application-package|| content :NECI : NECI_43061_00000_1T2G09 || Kernel : SCPK_40523_00001 || SCP Autotest : SCPA_40523_00001 || SCP operat. SW : SCP_00016_00000_XTT3X || DSP Autotest : NC_DSP_AT_CORE0_019 || DSP operat. SW : DSPN_02023_00000_T0 || || * W0O3XXR1.DDL 23.11.2011 2325248 b/Bin NC SW3 origin-package || content :NECI : NECI_66029_00000_1T3G09 || Kernel : SCPK_40502_00003 || SCP Autotest : SCPA_40500_00002 || SCP operat. SW : NC_SCP_0024_62MSN || DSP Autotest : NC_DSP_AT_CORE0_019 |

| DSP operat. SW : DSP_10027_00000_T0 || || * Y0W0AZK1.DDL 23.11.2011 2328832 b/Bin NC-DCS SW3 application-package|| content :NECI : NECI_44014_00000_1T2G18 || Kernel : SCPK_40523_00001 || SCP Autotest : SCPA_40523_00001 || SCP operat. SW : SCP_00016_00000_XTT3X || DSP Autotest : NC_DSP_AT_CORE0_019 || DSP operat. SW : DSPN_02023_00000_T0 || || + X0O0AZC4.DDL 23.11.2011 14952448 b/Bin RRH-900-ORIGIN applica-package|| content :NECI FPGA1 : NECI_72223_00002_1R3X09 || NECI FPGA2 : NECI_73223_00001_2R3X09 |

| Kernel : SCPK_41103_00000 || SCP Autotest : SCPA_41103_00000 || SCP operat. SW : SCP_BJ024_00000_XRT3X || DSP Autotest : DSPA_00004_00000_0 || DSP operat. SW : DSPN_02024_VO000_T0 || || + X0W0AZC4.DDL 23.11.2011 14924288 b/Bin RRH-900 application-package || content :NECI FPGA1 : NECI_72223_00002_1R3X09 || NECI FPGA2 : NECI_73223_00001_2R3X09 || Kernel : SCPK_41103_00000 || SCP Autotest : SCPA_41103_00000 || SCP operat. SW : SCP_BJ024_00000_XRT3X || DSP Autotest : DSPA_00004_00000_0 |

| DSP operat. SW : DSPN_02024_VO000_T0 || || + Z0W0AZK1.DDL 23.11.2011 11405056 b/Bin RRH-1800 application-package || content :NECI FPGA1 : NECI_50217_00000_1R2G18 || NECI FPGA2 : NECI_51217_00000_2R2G18 || Kernel : SCPK_41103_00000 || SCP Autotest : SCPA_41103_00000 || SCP operat. SW : SCP_BJ024_T0501_XRT3X || DSP Autotest : DSPA_00004_00000_0 || DSP operat. SW : DSPN_02024_VO000_T0 |


6/47

| || Delivery server : u2vob || Delivery file : BTS.EVOLIUM_TDM.11_0.00G.TAR || || Test reference done: No reference. ||___________________________________________________________________________|| |

|___________________________________________________________________________|| || Compatibility : || Software : || Firmware bootloader: SOMBAD01.FHB or higher || Software Patch File: SUMPAT01.DDL (01A) (standard) || OMU-CPF-File: 00O2AWI6.DDL (06I) or higher || G3-TRE-File: TSW3AX??.DDL (???) or higher || G4-TRE-File: USW3AX??.DDL (???) or higher || G5-TRE-File: VxW3AX??.DDL (???) or higher || ANX-File: ANX3ATE6.DDL (06E) or higher || AGC-File: AGC3AVL4.DDL (04L) or higher || BTS-Terminal: BTSW Version BTSWAV01B or higher || Hardware : || BTS: CIMI, CIMA, COMI, COME, || CIDE, CIDU, CODI, CODE, CODEE, CPT2, |

| MBO1, MBO2, MBI3, MBI5, CBO, || MBO1DC, MBO2DC || MBTS: MOCO || SUM: SUMA, SUMU (*) || MSUM: MB5G, MB5D, MB5P, MB5L, MB5E, DB5G, || DB5D, DB5P, DB5L, DB5E || TRE: TRGM, TRDM, TRPM, TRDH || MTRE: MB4G, MB4D, MB4E, DB4G, DB4D, DB4E || ATRE: TRAG, TRAD, TRAP, TAGH, TADH, TAPH, || TRAL, TRAGE, TRADE, TADHE, TAGHE || TTRE: TGT09, TGT18 || TRS*: TRU09 (*) || TROC: (*) |

| MTRA: MB5G, MB5D, MB5P, MB5L, MB5E, DB5G, || DB5D, DB5P, DB5L, DB5E || ANX: ANXG, ANXD, ANXP, ANCG, ANCD, ANCP, || ANCL || AGC: AGC9E, AGC18, AGX9E, AGX18 || ANY: ANYG, ANYD, ANYP, ANYL, ANBG, ANBD || XIOB: XIOB, OUTC, XIBM || FAN: FACB || ACDC: BCU1, BCU2, PM18C || ACPM: PM12 || BAT: BATS, BATM, BATL, BATLM || IDU: PIDU || |

| Remark: || Hardware marked with a (*) is handled at BCB on external request(e.g SUMU)||___________________________________________________________________________||>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>||>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>||>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>||>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>||>>>>>>>>>> M O D U L E D E L I V E R Y N O T E S >>>>>>>>>>>>>>>>>>>>>||>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>||>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>|


7/47

|>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>||>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>|SUMX SW : SAMSAZD9.DDL (based on SAMSAZC9)Date : 8.Nov.2011B11 SW Rel. : B11MR3Ed1.3SW Kernel : SUMX_KERNEL66_10BSP : 66_12FPGA : SULCC744Origin SW : samfxxe3.ddlAutotest : 26OMUCPF : 00o2azh8.08hNEM : BTSWAZH3 or higher

+ = = = New Features/Removed Restrictions = = = = = = = = = = = = = = = = = = =||| Common IP, TDM| --------------|| IP| ---|| TDM| ---

||+ = = = CR/Faults corrected = = = = = = = = = = = = = = = = = = = = = = = = = == =|| Common IP, TDM| --------------|| IP| --------------|| TDM| ---

| 1. Fix for 3BKA20FBR314146: [B11MR3ED1.3_TDM_MC_RRH_1800]Can not add MC_RRH1800 module| 2. Fix for 3BKA20FBR314277: [MC_RRH_TDM_1800][Ed1.3]: TREs in FOS state with alarm| SW_AN[3]-CONFIG_FAIL[246]-1 after performing add RRH procedure| 3. Fix for 3BKA34FBR313833: [MC_RRH_TDM_900][Ed1.3] Add RRH 900 is failing incase that the| rrh sw is not present on SUMX.| 4. Fix for tPtp task high CPU occupancy issue.| 5. Fix for VSWR issue: when 1PA RRH reports VSWR alarm to SUMx, VSWR alarms are only raised| by SUMx on trx 1 and 3(for PA1) instead of on all the 4

supported trx of 1PA RRH.|+ = = = Restrictions = = = = = = = = = = = = = = = = = = = = = = = = = = = = == = = = = =|| Common IP, TDM| --------------| Commissioning: Advanced VSWR Measurements|| Known Bug (no operational impact)


8/47

| ---------| SBL-State changes of not related OSF after Init OSF:|| If more then one MC-TRE are in 3G mode, i.e. SBL OSF for these TREs exist,| then an "Init" on one SBL OSF will force the state-change of all other OSF| which are "FLT" to "IT". This behaviour is restricted to SBL OSF, which are FLT,| i.e. SBL in state OPR are not affected.|| Example:| OSF-1 is "FLT" (for example due to CPRI-Link Failure)| An "Init" on OSF-2 will force the state change of OSF-1| (and all other OSFs, which are "FLT" from "FLT" to "IT")||+ = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = == = = = = = = = = = = = =------------------------------- Message Contents ----------------------------|---------------------------------------------------------------------------|| INTERNAL SUM O&M SW DELIVERY || Created : 05/09/11 Design Center : Stuttgart || by : Lothar Braue ||---------------------------------------------------------------------------|| Module : SUM O&M SW |

| Design Center Reference : SOMSAZB8.DDL (08B) || Delivery Location : (slsy1a.stgl.sel.alcatel.de) || /B11/Delivery/OMU_G3M4M || Specifications : Release 11 O&M Specifications || 3BK 11204 0447 DSZZA O&M Abis interface B11 Ed3rl || 3BK 11204 0445 DSZZA OMC/BSC HW/SW - FILES FORMAT SPECIFICATION B11 Ed3rl|| 3BK 11204 0371 DSZZA Labels definition on OMC-BSC interface Ed1rl || 3BK 11204 0237 DSZZA BSII Specification for BTS and NodeB Ed12rl || 3BK 11204 0162 DSZZA BTS and NodeB BCB Specification Ed15rl ||---------------------------------------------------------------------------|| Modifications added to the delivery : SOMSAZA8 (08A) || || Alignments to earlier releases: |

| - || || Alignments to SUMA implementation: || - || || Problems reported from BSS integration: || - 3BKA20FBR309461 [OFR B11MR3 PILOT]Increase of number of S [8] || HW-RESYNCH [8]since the migration to B11MR3ed1.1 || || Problems reported from BSS preintegration: || - || || Request for development: |

| - || || ARTS FR coming from earlier releases: || - || || ARTS CR: || - || || Problems reported by BTS Integration: || - |


9/47

| || Problems detected internally: || - || || Internal Improvements: || - Harmonisation with SUMA behavior related to fault report correction || 3BKA20FAG308177 SW migration from B10 to B11 MR1ed2.2: Too many TRX || failed after activation || || Known restrictions: || - || ||---------------------------------------------------------------------------|| Compatibility : || Firmware bootloader: SOMBAD01.FHB or higher || Firmware application: SOMFAZA1.DDL (01A) || Software Patch File: SOMPAT01.DDL (01A) standard || OMU-CPF-File: 00O2AV01.DDL (01A) or higher || ANX-File: ANX3ATE6.DDL (06E) or higher || AGC-File: AGC3AVL4.DDL (04L) or higher || G3-TRE-File: TSW3AZ??.DDL (0??) or higher || G4-TRE-File: USW3AZ??.DDL (0??) or higher || TransClock FW: TCLFADC8.DDL or higher for G3 || TCLSADC8.DDL or higher for M4M |

| BTS-Terminal: BTSW Version BTSW????? or higher || ||---------------------------------------------------------------------------|| SCM Visa : ||---------------------------------------------------------------------------|------------------------------- Message Contents ----------------------------|---------------------------------------------------------------------------|| INTERNAL SUM O&M SW DELIVERY || Created : 11/11/11 Design Center : Stuttgart || by : Lothar Braue ||---------------------------------------------------------------------------|| Module : SUM O&M SW || Design Center Reference : SUMSAZG5.DDL (05G) |

| Delivery Location : sharepoint GSM BTS Software Delivery || Deliveries > SUM > SUMA > B11 || Specifications : Release 11 O&M Specifications || 3BK 11204 0374 DSZZA O&M Abis interface B11 Ed4rl || 3BK 11204 0445 DSZZA OMC/BSC HW/SW - FILES FORMAT SPECIFICATION B11 Ed3rl|| 3BK 11204 0478 DSZZA BSS O&M PARAMETERS RELEASE B11 Ed5rl || 3BK 11204 0371 DSZZA Labels definition on OMC-BSC interface Ed1p3 || 3BK 11204 0237 DSZZA BSII Specification for BTS and NodeB Ed12rl || 3BK 11204 0162 DSZZA BTS and NodeB BCB Specification Ed15rl ||---------------------------------------------------------------------------|| Aligned to || B10 SW level : SUMSAXU2 (02U) || B11 MR1 Ed1 SW level : SUMSAZX2 (02X) |

| B11 MR1 Ed2 SW level : SUMSAZL7 (07L) || B11 MR1 Ed3 SW level : SUMSAZP3 (03P) || B11 MR3 Ed1.1 TDM SW level : SUMSAZP4 (04P) ||---------------------------------------------------------------------------|| Modifications added to the delivery : SUMSAZF5 (05F) || || Alignments to earlier releases: || - || || Alignments to commissioning software: |


10/47

| - || || Problems reported from BSS integration: || - 3BKA20FBR314430 [LP-S-B11] If a M5M is equipped with 12 TRx the alarm || "too many plugged modules" occurs || precised problem: a second sub slave module at a M5M slave module is || not accepted || || Problems reported from BSS preintegration: || - || || Request for development: || - || || ARTS FR coming from earlier releases: || - || || ARTS CR: || - || || Problems reported by BTS Integration: || - || || Problems detected internally: |

| - || || Internal improvements: || - improve reporting of VSWR values towards NEM when those messages are || not expected || ||---------------------------------------------------------------------------|| Compatibility at interface level, newer versions are highly recommended || due to implementation of features and bugfixes (for their interface || compatibility, please check the related delivery note): || Software : || Firmware bootloader: SOMBAD01.FHB or higher || Software Patch File: SUMPAZA1.DDL (01A) (standard) |

| OMU-CPF-File: 00O2AZB6.DDL (06B) or higher || G3-TRE-TDM-File: TSW3AZH2.DDL (02H) or higher || G3-TRE-IP-File: TSI3AZI2.DDL (02I) or higher || G4-TRE-TDM-File: USW3AZI2.DDL (02I) or higher || G4-TRE-IP-File: USI3AZI2.DDL (02I) or higher || G5-TRE-TDM-File: V1W3AZY2.DDL (02Y) or higher || G5-TRE-IP-File: V1I3AZR2.DDL (02R) or higher || ANX-File: ANX3ATE6.DDL (06E) or higher || AGC-File: AGC3AVL4.DDL (04L) or higher || BTS-Terminal: BTSW Version BTSWAZR1 or higher || Hardware : || BTS: CIMI, CIMA, COMI, COME, || CIDE, CIDU, CODI, CODE, CODEE, CPT2, |

| MBO1, MBO2, MBI3, MBI5, CBO, || MBO1DC, MBO2DC || MBTS: MOCO || SUM: SUMA, SUMU (*) || MSUM: MB5G, MB5D, MB5P, MB5L, MB5E, DB5G, || DB5D, DB5P, DB5L, DB5E || TRE: TRGM, TRDM, TRPM, TRDH || MTRE: MB4G, MB4D, MB4E, DB4G, DB4D, DB4E || ATRE: TRAG, TRAD, TRAP, TAGH, TADH, TAPH, || TRAL, TRAGE, TRADE, TADHE, TAGHE |


11/47

| TTRE: TGT09, TGT18 || NTRE: TMXA09, TMXA18 || TRS*: TRU09 (*) || TROC: (*) || MTRA: MB5G, MB5D, MB5P, MB5L, MB5E, DB5G, || DB5D, DB5P, DB5L, DB5E || ANX: ANXG, ANXD, ANXP, ANCG, ANCD, ANCP, || ANCL || AGC: AGC9E, AGC18, AGX9E, AGX18 || ANY: ANYG, ANYD, ANYP, ANYL, ANBG, ANBD || XIOB: XIOB, OUTC, XIBM || FAN: FACB || ACDC: BCU1, BCU2, PM18C || ACPM: PM12 || BAT: BATS, BATM, BATL, BATLM || IDU: PIDU || || Remark: || Hardware marked with a (*) is handled at BCB on external request(e.g SUMU)|| ||---------------------------------------------------------------------------|| SCM Visa : ||---------------------------------------------------------------------------||--------------------------------------------------------------------------

| OFFICIAL TRESW3 DELIVERY|| Created : 21.11.2011 Design Center : Stuttgart| by : M. Mller||--------------------------------------------------------------------------| Module (SW Filename) : TRE SW3 PACKAGE| Design Center References : v1w3aza5.ddl ( compressed )|| Delivery Location :| Deliveryweb:| https://all1.eu.alcatel-lucent.com/teams/gsm_bts_sw_deliv/Deliveries/TRE/G5/B11/tdm/V1W3AZA5

| http://slsy1a.stgl.sel.alcatel.de/ftpweb/B11/Delivery/G5/APPL/| ClearCase Label:| G5TWIN_S35BT501|| Package:| SCP: S35BT501 (new)| L1: Txxx_B11t_101_034|--------------------------------------------------------------------------|| SCP: AR 1-3291401 - B10 MR2 ED07QD05 AX03M (China)| reset of opstat bit removed and additional debug information||--------------------------------------------------------------------------

| Changed labels:| 1. Label: B11_G5TWIN_TRE_LOW_PERF_2 (M.M.)| Description:| - no reset of opstat bit anymore| - additional info extended| - additional prints when counter > = 8 to track SABM/IU_SIM| \scp_tel\agadchsd.c@@\main\stfu-g5twin-b11\17| \scp_tel\altlapdm.c@@\main\stfu-g5twin-b11\8|| 2. Label: B11_G5_DUMMY_PCH (M.M.)


12/47

| Description: same code from G3/G4 for FAGA_send_dummy_pch| \scp_tel\agacchso.c@@\main\stfu-g5twin-b11\6||---------------------------------------------------------------------------|| Configspec:###### B11 G5 TDM DEVELOPMENT configspec###MR 3 Ed1.3, MR 3 Ed 1.4###element * CHECKEDOUT

### AUTOMATIC SUBBRANCH CREATION##AUTOMATICSUBBRANCH stfu-b11-xxx# element * .../stfu-b11-xxx/LATESTelement * AUTOMATICBRANCHING

### NEXT PRODUCTIONelement * G5TWIN_S35BT501

### NEW LABELS READY FOR DELIVERYelement * B11_G5TWIN_TRE_LOW_PERF_2

element * B11_G5_DUMMY_PCH

### LAST PRODUCTION - BASE LABELelement * G5TWIN_S35BT142

### NEW AND LATEST ELEMENTSelement * .../stfu-g5twin-b11/LATESTelement * .../stfu-g5twin/LATESTelement * /main/LATEST -mkbranch stfu-g5twin-b11

### LOADRULES FOR SNAPSHOTVIEWS

load \VZFU.vb3\tr5load \VZFU.vb2\scp_sw_unitsload \VZFU.vb1\toolsload \ST_TRE_BIN\tre||--------------------------------------------------------------------------| Specifications : Release B11 for TGT|--------------------------------------------------------------------------|| - Restriction removed : None| - IIV Problem Report fixed permanently : None| - Change Request : None| - BTS-DC Problem report or evolutions : None

| - Problem Report fixed by temporary correction : None| - other modifications : None|| Softwares included :| please see filelist below||--------------------------------------------------------------------------| Restrictions :|--------------------------------------------------------------------------| Additional Information :


13/47

|--------------------------------------------------------------------------| SCM Visa :|--------------------------------------------------------------------------+--------------------------------------------------------------------------+| Layer 1 Operational SW || || Created : 25/07/2011 Design Center : Stuttgart || by : R.Frey || ||--------------------------------------------------------------------------|| Module (SW Filename) : tenc_b11t_001_034 || tdec_b11t_001_034 || Webserver: || http://slsy1a.stgl.sel.alcatel.de/ftpweb/B11/Delivery/G5/DSP/ || ClearCase: || STG5TRA.vb1\tra\delivery\DSP-OP\B11t-034 || ClearCase Label: || ST-G5TRA-TWIN-TEDDI_B11t_034 || || Specifications : Release B11TDM for TGT ||--------------------------------------------------------------------------|| || Modifications added to the delivery : || |

| Problem Description: (FR 3BKA20FAG310252) || VSWR check within TXP from B11 onwards should be based on total || attenuation taking into account also power balancing value || Problem Solution: || Modify comparison whether VSWR check should be done || Entity Label: ST-G5TRA-TWIN_TXPE_B11_004 || ||--------------------------------------------------------------------------|| Restrictions : ||--------------------------------------------------------------------------|| SCM Visa : |+--------------------------------------------------------------------------+//

//// Active Software Package Files for TWIN TRA - PQ (Cyphering 1)\ST_TRE_BIN\tre\tre_g5\import\DSP_AT\TAUTO_HW3_001.fh2 0 DSPAT_SW 0x00 0 0// DSP Autotest Software

\VZFU.vb3\tr5\import\LALE\lale1500l_atd010035.fh2 0 FPGA_SW 0x00 0 0// FPGA Software

\VZFU.vb3\tr5\delivery\SCP\s35bt501.fh2 0 SCP_SW 0x00 0 0// SCP Software (Active)

\VZFU.vb3\tr5\import\DSP\TENC_B11t_101_034.fh2 0 DSP_SW_E 0x00 0 0// DSP Software for Encoder

\VZFU.vb3\tr5\import\DSP\TDEC_B11t_101_034.fh2 0 DSP_SW_D 0x00 0 0// DSP Software for Decoder

//##

//##//##//## MC-TRX 2G Software Package//## = = = = = = = = = = = = = = = = = = = = = = = = = =//##//## Package's Mode ( 3rd character of the package name ) differentiates 2 cases://## - for ORIGIN software packages column 'Filesize reserved' is applied//## - for RELOAD software packages column 'Filesize reserved' is ignored//##


14/47

//## File chunklist.fh2 ...//## - is expected on RELATIVE path in your ClearCase View!//## - must be in 1st position as requirement for the SW Download!//##//-----------------------------------------------------------------------------------+----------+------------------+------------+------------+------------+// fh2-Component

| Filesize | Filetype, | Offset | Reserved | Reserved |//

| reserved | 16 char max | in File | | |//-----------------------------------------------------------------------------------+----------+------------------+------------+------------+------------+ ..\TRE\fh2\CHUNK_LIST\chunklist.fh2

0x200 CHUNK_LIST 0x00000000 0x00000000 0x00000000// - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - X:\Deliveries\TRE\fh2\FPGA_x_IMAGE\NECI_66029_00000_1T3G09.fh2

0x200000 FPGA_1_IMAGE 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\KERNEL_SW\SCPK_40502_00003\SCPK_40502_00003.fh2

0x2B0000 KERNEL_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\SCP_AUTOTEST_SW\SCPA_40500_00002.fh2

0x60000 SCP_AUTOTEST_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\SCP_BSII_DRIVER\BSII_Dummy.fh2

0x20000 SCP_BSII_DRIVER 0x00000000 0x00000000 0x00000000

X:\Deliveries\TRE\fh2\SCP_SW\NC_SCP_0024_62MSN.fh20x300000 SCP_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\CPRI_SW\nj_cpri_handler_18.fh2

0xB0000 CPRI_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\DSP_HW_CONFIG\NCDSP_HW_Config_000003.fh2

0x1000 DSP_HW_CONFIG 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\DSP_AT_CORE_x\NC_DSP_AT_019\NC_DSP_AT_CORE0_019.fh2 0x40000 DSP_AT_CORE_0_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\DSP_AT_CORE_x\NC_DSP_AT_019\NC_DSP_AT_CORE1_019.fh2 0x40000 DSP_AT_CORE_1_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\DSP_AT_CORE_x\NC_DSP_AT_019\NC_DSP_AT_CORE2_019.fh2 0x1000 DSP_AT_CORE_2_PA 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\DSP_CORE_x\DSP_10027_00000\DSP_10027_00000_T0.fh2

0x100000 DSP_CORE_0_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\DSP_CORE_x\DSP_10027_00000\DSP_10027_00000_T1.fh20x100000 DSP_CORE_1_SW 0x00000000 0x00000000 0x00000000

X:\Deliveries\TRE\fh2\DSP_CORE_x\DSP_10027_00000\DSP_10027_00000_T2.fh20x2000 DSP_CORE_2_PATCH 0x00000000 0x00000000 0x00000000

X:\Deliveries\TRE\fh2\ALFS_SW\NC_ALFS_040502_056.fh20x30000 ALFS_SW 0x00000000 0x00000000 0x00000000

X:\Deliveries\TRE\fh2\TFFS_IMAGE\TFFS_Image_14MB.fh20x8000 TFFS_IMAGE 0x00000000 0x00000000 0x00000000

// - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -// DUMMY

0x3000 PSOC_IMAGE 0x00000000 0x00000000 0x00000000

//-----------------------------------------------------------------------------------+----------+------------------+------------+------------+------------+//$#//$#//$#//$# MC-TRX 3G Software Package ( only relevant for 3G only )//$# = = = = = = = = = = = = = = = = = = = = = = = = = =//$#//$# to be loaded from the d2U code server and carrying TMXDA 2G Software Package inside.


15/47

//$# This section ( lines starting with //$ ) contains the configuration parameters for//$#//$# ecraddhead.exe//$#//$# generating the MCTRX 3G Software Package.//$#//$# SIGNATURE and CRC_SEED, must match the values in ../cpri_handler/platform/ftpc/imghead.h//$#//$# Output filename format according to 'MC-TRE_3G_OAM_Interface_Specification

_Ed01RL' ://$#//$# ################################## Board Identifier (fixed tag)//$# ##//$# ## ############################### Remote Equipment (fixed tag)//$# ## ##//$# ## ## ++----------------------- HWTYPE//$# ## ## || ++-------------------- VENDOR//$# ## ## || || ++++++------------- HWMODEL//$# ## ## || || ||||||//$# ## ## || || |||||| ############### File Version (fixed tag)//$# ## ## || || |||||| ##//$# ## ## || || |||||| ## ++------- MM

//$# ## ## || || |||||| ## ||++----- mm//$# ## ## || || |||||| ## |||| ++-- ee//$# ## ## || || |||||| ## |||| ||//$# _BI_RE_MC_TR_BAND08_FV_0901.03//$#//$# Output file example in hexadecimal values ( with 20-bytes-MCTRX-3G-headerin front )://$#//$# ----------- ----------- ----------- ----------- ----------- --------------------------//$# 3G-Head 3G-Head SIGNATURE Ecr-Image Ecr-Image TMXDA 2G Software Package//$# Crc Size Size Crc

//$# ----------- ----------- ----------- ----------- ----------- --------------------------//$# C7 42 F5 76 00 00 00 14 87 65 43 21 00 00 01 00 24 93 09 2B .. .. .. .. .. .. .. .. ..//$#//$# Basically, only field 'MM' needs to be changed.//$#//$#--------------+------------+----------------------------------------------------------------+//$# Variable | Value | Comment

|//$# | |

|

//$#--------------+------------+----------------------------------------------------------------+//$ SIGNATURE = 0x87654321 #//$ CRC_SEED = 0x0 #//$# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - -//$ HWTYPE = MC #//$ VENDOR = TR # Not 'ALU' as described in the spec//$ HWMODEL = BAND08 #//$ MM = 09 # Major Release


16/47

//$ mm = 01 # Minor Release - not used yet, but keep it here//$ ee = 03 # Edition - not used yet, but keep it here//$#--------------+------------+----------------------------------------------------------------+//$#//$#//$#|-----------------------------------------------------------------------------| OFFICIAL NC SW TRE DELIVERY|| Created : 9.11.2011 Design Center : Stuttgart| by : J.Lauckner||------------------------------------------------------------------------------| Module (SW Filename) : w0w_azk4||| ! To minimize the risk of running into a HW Watchdog, please activate UDP forSCP trace !!| The UDP trace is activated by connecting DTerm and selecting UDP.| RS232 tracing is stopped now after SW has started| UDP trace will not stop any more after power off/on (Kernel 15 or higher)||

| ! Please do not take a WinISA trace parallel to the SCP trace !||| Solved FR's:| 1.) ############################## SCP ######################################| FR:| CR:| 2.) ############################## NECI #####################################|| 3.) ############################## DSP ######################################|| 4.) ############################## Kernel ###################################|

| 5.) ############################## SCP-AT ###################################|| 6.) ############################## DSP-AT ###################################||------------------------------------------------------------------------------

#################################### SCP ####################################|--------------------------------------------------------------------------| OFFICIAL SCP DELIVERY|| Created : 09.11.2011 Design Center : Stuttgart| by : M.Koenig

||--------------------------------------------------------------------------| Module (SW Filename) : SCP SW3 PACKAGE| Design Center References : SCP_00016_00000_XTT3X.fh2 ( compressed )|| Delivery Location| Deliveryweb:| https://all1.eu.alcatel-lucent.com/teams/GSM_BTS_SW_DELIV/Deliveries/TRE/fh2/SCP_SW|


17/47


18/47

### NEW LABELS READY FOR DELIVERY#element * G6NC_COMPILER_WARNING_REMOVED

### LATEST PRODUCTION LABEL

element * SCP_00015_00000_XTT3X -nocheckout

### NEW AND LATEST ELEMENTSelement * .../stfu-g6nc/LATESTelement * /main/LATEST -mkbranch stfu-g6nc

### LOADRULES FOR SNAPSHOTVIEWSload \STNC.vb1\vxworks\target\config\TNDAload \ST_TRE_BIN\treload \VZFU.vb2\scp_sw_unitsload \VZFU.vb1\tools

#################################### NECI ####################################+------------+-----------------------------+------------------------------------2011-07-22 | NECI_43061_00000_1T2G09.fh2 | Derived From : NECI_43059_00000_1T2G09| | | Created by : Wolfgang Thiele| | | Comment : HW2/HW3 GSM 900 design| | | - HW3 supported;| | | New Features : - AnalogControl-2.20 (PA switch off sequenze)| | | : - operation clockselection only from Backpanel or CPRI-inputs| | | : - Debug possibili

ty on FrameSupervision-1.1| | | Modules : - MCBBTX5.29.1

| | | - MCBBRX2.15.1

| | | - RxAgc1.16.1

| | | - ViterbiEqualizer 1.17| | | - ClockResetControl 2.20| | | - PllControl

1.7

| | | - AnalogControl2.20

| | | - Timing1.3

| | | - EthernetInterface 2.9| | | - PowerQuiccCtrlStatus 1.11| | | - PowerQuiccInterface 1.2


19/47

| | | - FrameSupervision 1.1| | | - HdlcBsiiInterface 3.12| | | - Feedback

1.3| | | - TXRX_Sampler

19.2| | | - Sampler

8.1| | | - SmartPA

3.10| | | - CPRI

2.13| | | Solved Problems : none| | | Pinlist Version : 2.06| | | Tools : ISE11.4, Modelsim6.5b, Matlab 2008a,| | | (EDK not used)| | | Sysgen 11.1 SP3,Clearcase 7.0.1.7;| | | Board Type : TMXDA HW2, HW3| | | Software : DSP 02-2011;| | | Compatibility : not compatible wi

th GSM 1800 board;| | | Clearcase : Label STNC-NECI_43061_00000_1T2G09| | | Specification : 3BK-10265-0012-DSZZA Ed02 P04 (NECI specification in CMCS, Sharepoint)| | | Integration : FPGA pre-integration tests ok;| | | Fault Report No : none| | | Implementation : TimingScore :0, CostTable :60, Ucore :0.95 V, map:area -lc:off -xe:c| | | Resources: LUT:34082(57%), FF:41065(69%), BRAM:193(79%), DSP48E:209(32%)+------------+-----------------------------+------------------------------------

#################################### DSP #################################### SW Delivery Note for New Class DSP OP SW

This note characterizes the current delivery of the New Class Multi Carrier DSPOperational Software.

Software:

NC MC DSP OP SW

Issued by:

Hubert Fritz

Product Version:

Ver. 02023

Date of delivery:

21.10.2011


20/47

--------------------------------------------------------------------------------

Table of Contents

What's new since the previous version

Delivery contents

Implemented new Change Requests

Compatibility

New bug corrections (fault reports)

SW development environment versions

Restrictions / known problems

ClearCase labels

Supported features

Version history

Tested features

--------------------------------------------------------------------------------


New features*

Corrections (FR)

* Correction IU_ERR 2701, 3BKA34FBR313703IU_ERR 270D assumed to be solved as well by this correction, error no more reproduced.

Corrections (no FR)* SPA/DPD: Keep good DPD parameters even if no update in 15min had been done. This enhances long term stability of DPD a lot!

* 4G/LTE: Correction of noisefloor handling by id_osfcar_cfg

* 3G/4G: Corrected 3G/4G(mimo) frequencies check in carrier config message

* SPA/DPD: 1 carrier 8PSK DPD-improvements

Changes/Optimizations* SPA/DPD: Add debug feature DPD_DUMP_VIA_ETHERNET, REMOTE_FILE_LOCK_RQST (if dpd gain error)

* all: Shifted trigger points to level 4 and reduced amount of trigger points torecduce of code size

* Remove warnings and solve placement error


21/47

back to TOC

--------------------------------------------------------------------------------


Fault report number

Short description

back to TOC

--------------------------------------------------------------------------------


* IU_BEP messages may be requested for 2 out of 6 carriers only (max. 1 carrierper uplink DSP core)

* Reported value by IU_4G_RXGAIN is constant and not calculated.

back to TOC

--------------------------------------------------------------------------------

Supported features

2G (GSM):

Number of supported carriers

6

CS channel types / data rates

AMR/FR 4.75, 5.15, 5.90, 6.70, 7.40, 7.95, 10.2, 12.2AMR/HR 4.75, 5.15, 5.90, 6.70, 7.40AMR-WB 6.60, 8.85, 12.65TCH/EFSTCH/FSTCH/HSTCH/F 2.4, 4.8, 9.6

PS channel types

PACCH

PDDCHPDTCHPRACHPTCCH

PS Coding

CS1-CS4MCS1-MCS9


22/47


23/47

DSPN_*_00000_I0.out

DSPN_*_00000_T1.out

DSPN_*_00000_I1.out

DSPN_*_00000_T2.out

DSPN_*_00000_I2.out

Executable files in fh2 format (for cores 0, 1 and 2):

TDM:

IP:

DSPN_*_00000_T0.fh2

DSPN_*_00000_I0.fh2

DSPN_*_00000_T1.fh2

DSPN_*_00000_I1.fh2

DSPN_*_00000_T2.fh2

DSPN_*_00000_I2.fh2

Map files (for cores 0, 1 and 2):

TDM:

IP:

DSPN_*_00000_T0.map

DSPN_*_00000_I0.map

DSPN_*_00000_T1.map

DSPN_*_00000_I1.map

DSPN_*_00000_T2.map

DSPN_*_00000_I2.map

Logic analyzer symbol files:DSPN_*_00000_addr.sym

DSPN_*_00000_alarm_codes.symDSPN_*_00000_data.sym

This delivery note:DSPN_*_00000_DeliveryNotes.html

back to TOC

--------------------------------------------------------------------------------


24/47

Compatibility

This software is compatible with the following FW/SW environment:

DSP VLAN version is aligned to Kernel SCPK_41400_00000 and newer

Please check on your own using software schedules or NECI version overview on Sharepoint delivery server.back to TOC

--------------------------------------------------------------------------------


C6000 Code Generation Tools

v7.0.4

DSP/BIOS

5.41.07.24

back to TOC

--------------------------------------------------------------------------------

ClearCase information

ClearCase label used for this delivery:

ST_NC_DSP_02023_00000

Delta information relates to ClearCase label:

ST_NC_DSP_02022_00000

Config spec used :

ST_NC_DSP_02_config_spec_0196 (corrected 26.10.11 HFr)

back to TOC

--------------------------------------------------------------------------------

Version history

Label

Date

Modifications to previous version

ST_NC_DSP_02002_00000

07.04.2011


25/47

1st delivery from new VOB, pwr distrib algo new

ST_NC_DSP_02003_00000

11.04.2011

PN sequ, ID_DUMMY sequence, NCO3 limit for 1800

ST_NC_DSP_02004_00000

13.04.2011

MCS correction, 3G improvements/corrections, FT sampler problem fixed

ST_NC_DSP_02005_00000

18.04.2011

VSWR alarm correction, disable interrupts during COSIM interface handling

ST_NC_DSP_02006_00000

02.05.2011

3G power and Rx WCDMA gain corrections, SPA/TXP optimizations

ST_NC_DSP_02007_00000

12.05.2011

VLAN for FT, forward feedback delay for SPA 3.10

ST_NC_DSP_02008_00000

23.05.2011

take2 pwr algo, ECPL test mode, MSR 2G/3G on 1 PA, 3G pwr loop correction, 3G SP

A 3.10 corrections, 3G new calib factor, modified IU_DUMMY handling

ST_NC_DSP_02009_00000

10.06.2011

ST_NC_DSP_02010_00000

13.07.2011

MSR power calculation, SPA/DPD LUT table update correction, 3G Rx power meter adaptation

ST_NC_DSP_02011_00000

13.07.2011

LTE corrections, DPD IU_ERR 8023 correction, Viterbi Equalizer on DSP used for 4G, TRE 3G Rx power reporting (RTWP) adaptation to generic values determined by simulation

ST_NC_DSP_02012_00000


26/47

28.07.2011

advanced VSWR, 2 LTE carriers, TXP corrections, 2 VEQ on DSP / 4 on FPGA

ST_NC_DSP_02013_00000

08.08.2011

16/18 bit DPD, TMA attenuators via ID_MODE, 3G power corrections

ST_NC_DSP_02014_00000

30.08.2011

3G overbooking, Tx power reference point, Gain simulation

ST_NC_DSP_02015_00000

30.08.2011

mapping of 2G carriers to DSP-cores (VLAN only), SPA writeLUT interface 16/18 bit

ST_NC_DSP_02016_00000

30.08.2011

2G ramping OFF mode, MSC9 improvements

ST_NC_DSP_02017_00000

21.09.2011

ST_NC_DSP_02018_00000

21.09.2011

New kernel (new DSP uplink core mapping)

ST_NC_DSP_02019_00000

21.09.2011

Fallback to OLD kernel (old DSP uplink core mapping)

ST_NC_DSP_02020_00000

28.09.2011

New VLAN kernel (4.14.0) supporting new DSP 2G uplink core mapping scheme

ST_NC_DSP_02021_00000

05.10.2011

ST_NC_DSP_02022_00000

17.10.2011

ST_NC_DSP_02023_00000


27/47

21.10.2011

IU_ERR 2701

back to TOC

[End of Document]

#################################### SCPK ####################################

--------------------------------------------------------------------------------2011-11-09 SCPK_40523_00001.fh2 - Non-VLAN-Kernel

- MCTRX 900MHz HW1B, HW2, HW3, HW4MCRRH 900MHz HW1, HW2MCTRX 1800MHz HW1, HW2MCRRH 1800MHz HW1- Requirements: Dterm Application specific settings ( see Note_2 )

- Component Dependencies:=+--BootSelector| +--MCTRX 900MHz-+-NC_BootSel_40100_00000.fh2 or later| +--MCRHH 900MHz-+| || +--MCTRX 1800MHz-+-NC_BootSel_40200_00000.fh2 or later| +--MCRHH 1800MHz-+||=+--FPGA_x_IMAGE| +--MCTRX| | +--3G-----------NECI3G_66020_00000.fh2 or later| |

| +--MCRRH| +--HW2-------+--NECI_53236_12005_1R2G09.fh2 or later| | +--NECI_54237_00000_2R2G09.fh2 or later| | +--NECI_50212_00000_1R2G18.fh2 or later| | +--NECI_51212_00000_2R2G18.fh2 or later| | +--NECI_72217_00000_1R3X09.fh2 or later| | +--NECI_73219_00000_2R3X09.fh2 or later| || +--HW3-------+--| +--|=+--SCP_AUTOTEST_SW----SCPA_40523_00001.fh2|

=+--DSP_AT_CORE_x| +--MCTRX-----------NC_DSP_AT_CORE[0|1|2]_019.fh2,| | or DSPA_00001_00000_[0|1|2].fh2,| | or DSPA_00002_00000_[0|1|2].fh2| | ( but NOT DSPA_00004_00000_[0|1|2].fh2 )| || +--MCRRH--------DSPA_00002_00000_[0|1|2].fh2| ( but NOT DSPA_00004_00000_[0|1|2].fh2 )||


28/47

=+--DSP_CORE_x+--MCTRX-----------NC_DSP_CORE[0|1|2]_B11DT_093.fh2 or later=+--MCRRH+--TDM-------+--DSPN_02014_00000_T[0|1|2].fh2 or later+--IP--------+--DSPN_02014_00000_I[0|1|2].fh2 or later

Build by Carsten Rose- Hints:- Kernel 4.5.23 with serial line- Corrections:bugfix in PS_SwitchOutputVoltageAdaption in Show_NPSAadd new variable in PS_14V0_OnOff in structure NPSApasspoints Flash_Access.c- switch off 14V0 output voltage by default (state persistent stored in NPSA)- support also old RESET_ACTIVATE_SOFTWARE code for Kernels < 4.5.3- Features:RRH HW3 support- Restrictions:- Config-Spec, Note_1:element /STNC.vb1 STNC_ROUTE_001element /STNC.vb1/src STNC_ROUTE_001element /STNC.vb1/trigger STNC_ROUTE_001element /STNC.vb1/workspace STNC_ROUTE_001

element /STNC.vb1/workspace/Kernel_Image/... TMxDA_BSP_040523_01element /STNC.vb1/vxworks/target/config/TNDA/... TMxDA_BSP_040523_01element /STNC.vb1/vxworks/... TMxDA_VXWORKS_16_01element /STNC.vb1/components/... TMxDA_VXWORKS_16_01--------------------------------------------------------------------------------

#################################### SCPA ####################################--------------------------------------------------------------------------------2011-11-09 SCPA_40523_00001.fh2 - MCTRX 900MHz HW1B, HW2, HW3, HW4MCRRH 900MHz HW1, HW2MCTRX 1800MHz HW1, HW2MCRRH 1800MHz HW1

by Carsten Rose- Requirements: SCPK_40523_00001.fh2 DSPA_00002_00000_0.fh2 DSPA_00002_00000_0.fh2 DSPA_00002_00000_0.fh2 NECI_53236_12005_1R2G09.fh2 NECI_54237_00000_2R2G09.fh2- Corrections:- recompiled against BSP 4.5.23_01Power Manager Test takes new NPSA variable PS_14V0_OnOff into accountAISG Test takes new NPSA variable PS_14V0_OnOff into accountPower Supply Test takes new NPSA variable PS_14V0_OnOff into account

- Features:- Restrictions:- Config-Spec appended to , NOTE_1:# element * CHECKEDOUTelement /STNC.vb1/src/Autotest/... TMxDA_SCP_AT_040523_01element /STNC.vb1/workspace/Autotest/... TMxDA_SCP_AT_040523_01element /STNC.vb1/workspace/Kernel_Image/... TMxDA_BSP_040523_01element /STNC.vb1/vxworks/target/config/TNDA/... TMxDA_BSP_040523_01element /STNC.vb1/vxworks/... TMxDA_VXWORKS_16_01element /STNC.vb1/components/... TMxDA_VXWORKS_16_01


29/47


30/47

0xB0000 CPRI_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\DSP_HW_CONFIG\NCDSP_HW_Config_000003.fh2

0x1000 DSP_HW_CONFIG 0x00000000 0x00000000 0x00000000 D:\production\fh2\NC_DSP_AT_019\NC_DSP_AT_CORE0_019.fh2 0x40000DSP_AT_CORE_0_SW 0x00000000 0x00000000 0x00000000 D:\production\fh2\NC_DSP_AT_019\NC_DSP_AT_CORE1_019.fh2 0x40000DSP_AT_CORE_0_SW 0x00000000 0x00000000 0x00000000 D:\production\fh2\NC_DSP_AT_019\NC_DSP_AT_CORE2_019.fh2 0x40000DSP_AT_CORE_0_SW 0x00000000 0x00000000 0x00000000 D:\production\fh2\DSPN_02023_00000\DSPN_02023_00000_T0.fh2 0x100000 DSP_CORE_0_SW 0x00000000 0x00000000 0x00000000 D:\production\fh2\DSPN_02023_00000\DSPN_02023_00000_T1.fh2 0x100000 DSP_CORE_1_SW 0x00000000 0x00000000 0x00000000 D:\production\fh2\DSPN_02023_00000\DSPN_02023_00000_T2.fh2 0x2000 DSP_CORE_2_PATCH 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\ALFS_SW\NC_ALFS_040523_065.fh2

0x30000 ALFS_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\TFFS_IMAGE\TFFS_Image_14MB.fh2

0x8000 TFFS_IMAGE 0x00000000 0x00000000 0x00000000// - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -"; // DUMMY

0x3000 PSOC_IMAGE 0x00000000 0x00000000 0x00000000

"; //-----------------------------------------------------------------------------------+----------+------------------+------------+------------+------------+"; //$# //$# //$# //$# MC-TRX 3G Software Package ( only relevant for 3G only ) //$# = = = = = = = = = = = = = = = = = = = = = = = = = = //$# //$# to be loaded from the d2U code server and carrying TMXDA 2G Software Package inside. //$# This section ( lines starting with //$ ) contains the configuration

parameters for //$# //$# ecraddhead.exe //$# //$# generating the MCTRX 3G Software Package. //$# //$# SIGNATURE and CRC_SEED, must match the values in ../cpri_handler/platform/ftpc/imghead.h //$# //$# Output filename format according to 'MC-TRE_3G_OAM_Interface_Specification_Ed01RL' : //$# //$# ################################## Board Identifier (fixed ta

g) //$# ## //$# ## ############################### Remote Equipment (fixed tag) //$# ## ## //$# ## ## ++----------------------- HWTYPE //$# ## ## || ++-------------------- VENDOR //$# ## ## || || ++++++------------- HWMODEL //$# ## ## || || |||||| //$# ## ## || || |||||| ############### File Version (fixed ta


31/47

g) //$# ## ## || || |||||| ## //$# ## ## || || |||||| ## ++------- MM //$# ## ## || || |||||| ## ||++----- mm //$# ## ## || || |||||| ## |||| ++-- ee //$# ## ## || || |||||| ## |||| || //$# _BI_RE_MC_TR_BAND08_FV_0901.03 //$# //$# Output file example in hexadecimal values ( with 20-bytes-MCTRX-3G-header in front ): //$# //$# ----------- ----------- ----------- ----------- ----------- -------------------------- //$# 3G-Head 3G-Head SIGNATURE Ecr-Image Ecr-Image TMXDA 2G Software Package //$# Crc Size Size Crc //$# ----------- ----------- ----------- ----------- ----------- -------------------------- //$# C7 42 F5 76 00 00 00 14 87 65 43 21 00 00 01 00 24 93 09 2B .... .. .. .. .. .. .. .. //$# //$# Basically, only field 'MM' needs to be changed. //$# //$#--------------+------------+-----------------------------------------

-----------------------+ //$# Variable | Value | Comment|

//$# | ||

//$#--------------+------------+----------------------------------------------------------------+ //$ SIGNATURE = 0x87654321 # //$ CRC_SEED = 0x0 # //$# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - //$ HWTYPE = MC # //$ VENDOR = TR # Not 'ALU' as described in the spec

//$ HWMODEL = BAND08 # //$ MM = 09 # Major Release //$ mm = 01 # Minor Release - not used yet, but keepit here //$ ee = 03 # Edition - not used yet, but keepit here //$#--------------+------------+----------------------------------------------------------------+ //$# //$# //$#

|-----------------------------------------------------------------------------| OFFICIAL NC SW TRE DELIVERY|| Created : 9.11.2011 Design Center : Stuttgart| by : J.Lauckner||------------------------------------------------------------------------------| Module (SW Filename) : y0w_azk1|


32/47

|| ! To minimize the risk of running into a HW Watchdog, please activate UDP forSCP trace !!| The UDP trace is activated by connecting DTerm and selecting UDP.| RS232 tracing is stopped now after SW has started| UDP trace will not stop any more after power off/on (Kernel 15 or higher)||| ! Please do not take a WinISA trace parallel to the SCP trace !||| Solved FR's:| 1.) ############################## SCP ######################################| FR:| CR:| 2.) ############################## NECI #####################################|| 3.) ############################## DSP ######################################|| 4.) ############################## Kernel ###################################|| 5.) ############################## SCP-AT ###################################|| 6.) ############################## DSP-AT ###################################

||------------------------------------------------------------------------------

#################################### SCP ####################################|--------------------------------------------------------------------------| OFFICIAL SCP DELIVERY|| Created : 09.11.2011 Design Center : Stuttgart| by : M.Koenig||--------------------------------------------------------------------------| Module (SW Filename) : SCP SW3 PACKAGE

| Design Center References : SCP_00016_00000_XTT3X.fh2 ( compressed )|| Delivery Location| Deliveryweb:| https://all1.eu.alcatel-lucent.com/teams/GSM_BTS_SW_DELIV/Deliveries/TRE/fh2/SCP_SW|| Production based on element * SCP_00015_00000_XTT3X|| Requirements:| SCPK_40523_01 (serial version)||--------------------------------------------------------------------------

| Solved problems:| SCP:| FR:| CR:|| This software can act as Origin and Application software. It recognizes therestart reason and| flash bank. If it recognizes that it is Origin then it sends MODULE_STARTED

_IND and starts with| the START_FILE_REQ the selected software.


33/47


35/47

| | | - HWMon1.0

| | | Solved Problems : none| | | Pinlist Version : 1.5| | | Tools : ISE13.1, Modelsim6.5b, Matlab 2008a,| | | (EDK not used)| | | Sysgen 11.1 SP3,Clearcase 6.1;| | | Board Type : TMXDA 1800 HW1| | | Software : DSP 90 software or higher;| | | Compatibility : not compatible with GSM 900 board;| | | Clearcase : Label STNC-NECI_44014_00000_1T2G18| | | Specification : 3BK-10265-0012-DSZZA Ed02 P03 (NECI specification in CMCS, Sharepoint)| | | Integration : FPGA pre-integration tests ok;| | | Fault Report No : none| | | Implementation : TimingScore : 2472 , CostTable :10, Ucore :0.95 V, map:area -lc:off -xe:n| | | Resources: LUT:31

804(54%), FF:36980(62%), BRAM:192(79%), DSP48E:232(36%)+------------+-----------------------------+------------------------------------

#################################### DSP #################################### SW Delivery Note for New Class DSP OP SW

This note characterizes the current delivery of the New Class Multi Carrier DSPOperational Software.

Software:

NC MC DSP OP SW

Issued by:

Hubert Fritz

Product Version:

Ver. 02023

Date of delivery:

21.10.2011

--------------------------------------------------------------------------------

Table of Contents


Delivery contents

Implemented new Change Requests


36/47

Compatibility




ClearCase labels

Supported features

Version history

Tested features

--------------------------------------------------------------------------------


New features*

Corrections (FR)* Correction IU_ERR 2701, 3BKA34FBR313703IU_ERR 270D assumed to be solved as well by this correction, error no more reproduced.

Corrections (no FR)* SPA/DPD: Keep good DPD parameters even if no update in 15min had been done. This enhances long term stability of DPD a lot!

* 4G/LTE: Correction of noisefloor handling by id_osfcar_cfg

* 3G/4G: Corrected 3G/4G(mimo) frequencies check in carrier config message

* SPA/DPD: 1 carrier 8PSK DPD-improvements

Changes/Optimizations* SPA/DPD: Add debug feature DPD_DUMP_VIA_ETHERNET, REMOTE_FILE_LOCK_RQST (if dpd gain error)

* all: Shifted trigger points to level 4 and reduced amount of trigger points torecduce of code size

* Remove warnings and solve placement error

back to TOC

--------------------------------------------------------------------------------


Fault report number

Short description


37/47

back to TOC

--------------------------------------------------------------------------------


* IU_BEP messages may be requested for 2 out of 6 carriers only (max. 1 carrierper uplink DSP core)

* Reported value by IU_4G_RXGAIN is constant and not calculated.

back to TOC

--------------------------------------------------------------------------------

Supported features

2G (GSM):


6

CS channel types / data rates

AMR/FR 4.75, 5.15, 5.90, 6.70, 7.40, 7.95, 10.2, 12.2AMR/HR 4.75, 5.15, 5.90, 6.70, 7.40AMR-WB 6.60, 8.85, 12.65TCH/EFSTCH/FSTCH/HSTCH/F 2.4, 4.8, 9.6

PS channel types

PACCHPDDCHPDTCHPRACHPTCCH

PS Coding

CS1-CS4MCS1-MCS9

OAM functions

SW download & start and configuration from O&M

3G (UMTS):


up to 3 Tx carrier per PA, 4 carrier per MC-module


38/47

4G (LTE):


up to 2 Tx antenna carrier per PA, up to 4 Tx antenna carrier per MC-module

back to TOC

--------------------------------------------------------------------------------

Tested features

Regression tests:

2G:

* Tests in pre-integration environment:

* Basic test for 6TRX minimum spacing (ENC test mode)

* Tests at module level using linalfs:MC-TRE and MC-RRH with 6 GSM carriers;

3G:

back to TOC

--------------------------------------------------------------------------------

Delivery contents

File name list:

(all files to be found in Sharepoint directory)

* in following file names mean delivered version number.

Executable files as generated by linker (for cores 0, 1 and 2):

TDM:

IP:

DSPN_*_00000_T0.out

DSPN_*_00000_I0.out

DSPN_*_00000_T1.out

DSPN_*_00000_I1.out

DSPN_*_00000_T2.out

DSPN_*_00000_I2.out


39/47

Executable files in fh2 format (for cores 0, 1 and 2):

TDM:

IP:

DSPN_*_00000_T0.fh2

DSPN_*_00000_I0.fh2

DSPN_*_00000_T1.fh2

DSPN_*_00000_I1.fh2

DSPN_*_00000_T2.fh2

DSPN_*_00000_I2.fh2

Map files (for cores 0, 1 and 2):

TDM:

IP:

DSPN_*_00000_T0.map

DSPN_*_00000_I0.map

DSPN_*_00000_T1.map

DSPN_*_00000_I1.map

DSPN_*_00000_T2.map

DSPN_*_00000_I2.map

Logic analyzer symbol files:DSPN_*_00000_addr.symDSPN_*_00000_alarm_codes.symDSPN_*_00000_data.sym

This delivery note:DSPN_*_00000_DeliveryNotes.html

back to TOC

--------------------------------------------------------------------------------

Compatibility

This software is compatible with the following FW/SW environment:

DSP VLAN version is aligned to Kernel SCPK_41400_00000 and newer

Please check on your own using software schedules or NECI version overview on Sharepoint delivery server.back to TOC

--------------------------------------------------------------------------------


40/47


C6000 Code Generation Tools

v7.0.4

DSP/BIOS

5.41.07.24

back to TOC

--------------------------------------------------------------------------------

ClearCase information

ClearCase label used for this delivery:

ST_NC_DSP_02023_00000

Delta information relates to ClearCase label:

ST_NC_DSP_02022_00000

Config spec used :

ST_NC_DSP_02_config_spec_0196 (corrected 26.10.11 HFr)

back to TOC

--------------------------------------------------------------------------------

Version history

Label

Date

Modifications to previous version

ST_NC_DSP_02002_00000

07.04.2011

1st delivery from new VOB, pwr distrib algo new

ST_NC_DSP_02003_00000

11.04.2011

PN sequ, ID_DUMMY sequence, NCO3 limit for 1800

ST_NC_DSP_02004_00000

13.04.2011


41/47


42/47

30.08.2011

3G overbooking, Tx power reference point, Gain simulation

ST_NC_DSP_02015_00000

30.08.2011

mapping of 2G carriers to DSP-cores (VLAN only), SPA writeLUT interface 16/18 bit

ST_NC_DSP_02016_00000

30.08.2011

2G ramping OFF mode, MSC9 improvements

ST_NC_DSP_02017_00000

21.09.2011

ST_NC_DSP_02018_00000

21.09.2011

New kernel (new DSP uplink core mapping)

ST_NC_DSP_02019_00000

21.09.2011

Fallback to OLD kernel (old DSP uplink core mapping)

ST_NC_DSP_02020_00000

28.09.2011

New VLAN kernel (4.14.0) supporting new DSP 2G uplink core mapping scheme

ST_NC_DSP_02021_00000

05.10.2011

ST_NC_DSP_02022_00000

17.10.2011

ST_NC_DSP_02023_00000

21.10.2011

IU_ERR 2701

back to TOC

[End of Document]


43/47


44/47

Adaption in Show_NPSAadd new variable in PS_14V0_OnOff in structure NPSApasspoints Flash_Access.c- switch off 14V0 output voltage by default (state persistent stored in NPSA)- support also old RESET_ACTIVATE_SOFTWARE code for Kernels < 4.5.3- Features:RRH HW3 support- Restrictions:- Config-Spec, Note_1:element /STNC.vb1 STNC_ROUTE_001element /STNC.vb1/src STNC_ROUTE_001element /STNC.vb1/trigger STNC_ROUTE_001element /STNC.vb1/workspace STNC_ROUTE_001element /STNC.vb1/workspace/Kernel_Image/... TMxDA_BSP_040523_01element /STNC.vb1/vxworks/target/config/TNDA/... TMxDA_BSP_040523_01element /STNC.vb1/vxworks/... TMxDA_VXWORKS_16_01element /STNC.vb1/components/... TMxDA_VXWORKS_16_01--------------------------------------------------------------------------------

#################################### SCPA ####################################--------------------------------------------------------------------------------2011-11-09 SCPA_40523_00001.fh2 - MCTRX 900MHz HW1B, HW2, HW3, HW4MCRRH 900MHz HW1, HW2

MCTRX 1800MHz HW1, HW2MCRRH 1800MHz HW1 by Carsten Rose- Requirements: SCPK_40523_00001.fh2 DSPA_00002_00000_0.fh2 DSPA_00002_00000_0.fh2 DSPA_00002_00000_0.fh2 NECI_53236_12005_1R2G09.fh2 NECI_54237_00000_2R2G09.fh2- Corrections:- recompiled against BSP 4.5.23_01Power Manager Test takes new NPSA variable PS_14V0_OnOff into account

AISG Test takes new NPSA variable PS_14V0_OnOff into accountPower Supply Test takes new NPSA variable PS_14V0_OnOff into account- Features:- Restrictions:- Config-Spec appended to , NOTE_1:# element * CHECKEDOUTelement /STNC.vb1/src/Autotest/... TMxDA_SCP_AT_040523_01element /STNC.vb1/workspace/Autotest/... TMxDA_SCP_AT_040523_01element /STNC.vb1/workspace/Kernel_Image/... TMxDA_BSP_040523_01element /STNC.vb1/vxworks/target/config/TNDA/... TMxDA_BSP_040523_01element /STNC.vb1/vxworks/... TMxDA_VXWORKS_16_01element /STNC.vb1/components/... TMxDA_VXWORKS_16_01element /STNC.vb1/... /main/stnc-b11-llc-

d-1/LATESTelement /STNC.vb1/... /main/LATEST -mkbranch stnc-b11-llc-d-1element * /main/LATEST--------------------------------------------------------------------------------

################################### DSP-AT ###################################


45/47

############################### packchunk.txt ###############################

//## //## //## //## MC-TRX 2G Software Package //## = = = = = = = = = = = = = = = = = = = = = = = = = = //## //## Package's Mode ( 3rd character of the package name ) differentiates 2 cases: //## - for ORIGIN software packages column 'Filesize reserved' is applied //## - for RELOAD software packages column 'Filesize reserved' is ignored //## //## File chunklist.fh2 ... //## - is expected on RELATIVE path in your ClearCase View! //## - must be in 1st position as requirement for the SW Download! //## //-----------------------------------------------------------------------------------+----------+------------------+------------+------------+------------+ // fh2-Component

| Filesize | Filetype, | Offset | Reserved | Reserved| //

| reserved | 16 char max | in File | ||

//-----------------------------------------------------------------------------------+----------+------------------+------------+------------+------------+ ..\TRE\fh2\CHUNK_LIST\chunklist.fh2

0x200 CHUNK_LIST 0x00000000 0x00000000 0x00000000 // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- X:\Deliveries\TRE\fh2\FPGA_x_IMAGE\NECI_44014_00000_1T2G18.fh20x200000 FPGA_1_IMAGE 0x00000000 0x00000000 0x00000000

X:\Deliveries\TRE\fh2\KERNEL_SW\SCPK_40523_00001\SCPK_40523_00001.fh20x2C0000 KERNEL_SW 0x00000000 0x00000000 0x00000000

X:\Deliveries\TRE\fh2\SCP_AUTOTEST_SW\SCPA_40523_00001.fh20x60000 SCP_AUTOTEST_SW 0x00000000 0x00000000 0x00000000

X:\Deliveries\TRE\fh2\SCP_BSII_DRIVER\BSII_Dummy.fh20x20000 SCP_BSII_DRIVER 0x00000000 0x00000000 0x00000000

X:\Deliveries\TRE\fh2\SCP_SW\SCP_00016_00000_XTT3X.fh20x300000 SCP_SW 0x00000000 0x00000000 0x00000000

X:\Deliveries\TRE\fh2\CPRI_SW\cpri_handler_3GO713_k419_020.fh20xB0000 CPRI_SW 0x00000000 0x00000000 0x0000000

0 X:\Deliveries\TRE\fh2\DSP_HW_CONFIG\NCDSP_HW_Config_000003.fh2

0x1000 DSP_HW_CONFIG 0x00000000 0x00000000 0x00000000 D:\production\fh2\NC_DSP_AT_019\NC_DSP_AT_CORE0_019.fh2 0x40000DSP_AT_CORE_0_SW 0x00000000 0x00000000 0x00000000 D:\production\fh2\NC_DSP_AT_019\NC_DSP_AT_CORE1_019.fh2 0x40000DSP_AT_CORE_0_SW 0x00000000 0x00000000 0x00000000 D:\production\fh2\NC_DSP_AT_019\NC_DSP_AT_CORE2_019.fh2 0x40000DSP_AT_CORE_0_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\DSP_CORE_x\DSPN_02023_00000\DSPN_02023_00000_T0.fh


46/47

2 0x100000 DSP_CORE_0_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\DSP_CORE_x\DSPN_02023_00000\DSPN_02023_00000_T1.fh2 0x100000 DSP_CORE_1_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\DSP_CORE_x\DSPN_02023_00000\DSPN_02023_00000_T2.fh2 0x2000 DSP_CORE_2_PATCH 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\ALFS_SW\NC_ALFS_040523_065.fh2

0x30000 ALFS_SW 0x00000000 0x00000000 0x00000000 X:\Deliveries\TRE\fh2\TFFS_IMAGE\TFFS_Image_14MB.fh2

0x8000 TFFS_IMAGE 0x00000000 0x00000000 0x00000000// - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -"; // DUMMY

0x3000 PSOC_IMAGE 0x00000000 0x00000000 0x00000000"; //-----------------------------------------------------------------------------------+----------+------------------+------------+------------+------------+"; //$# //$# //$# //$# MC-TRX 3G Software Package ( only relevant for 3G only ) //$# = = = = = = = = = = = = = = = = = = = = = = = = = = //$# //$# to be loaded from the d2U code server and carrying TMXDA 2G Softwar

e Package inside. //$# This section ( lines starting with //$ ) contains the configurationparameters for //$# //$# ecraddhead.exe //$# //$# generating the MCTRX 3G Software Package. //$# //$# SIGNATURE and CRC_SEED, must match the values in ../cpri_handler/platform/ftpc/imghead.h //$# //$# Output filename format according to 'MC-TRE_3G_OAM_Interface_Specification_Ed01RL' :

//$# //$# ################################## Board Identifier (fixed tag) //$# ## //$# ## ############################### Remote Equipment (fixed tag) //$# ## ## //$# ## ## ++----------------------- HWTYPE //$# ## ## || ++-------------------- VENDOR //$# ## ## || || ++++++------------- HWMODEL //$# ## ## || || |||||| //$# ## ## || || |||||| ############### File Version (fixed tag)

//$# ## ## || || |||||| ## //$# ## ## || || |||||| ## ++------- MM //$# ## ## || || |||||| ## ||++----- mm //$# ## ## || || |||||| ## |||| ++-- ee //$# ## ## || || |||||| ## |||| || //$# _BI_RE_MC_TR_BAND08_FV_0901.03 //$# //$# Output file example in hexadecimal values ( with 20-bytes-MCTRX-3G-header in front ): //$#


47/47

//$# ----------- ----------- ----------- ----------- ----------- -------------------------- //$# 3G-Head 3G-Head SIGNATURE Ecr-Image Ecr-Image TMXDA 2G Software Package //$# Crc Size Size Crc //$# ----------- ----------- ----------- ----------- ----------- -------------------------- //$# C7 42 F5 76 00 00 00 14 87 65 43 21 00 00 01 00 24 93 09 2B .... .. .. .. .. .. .. .. //$# //$# Basically, only field 'MM' needs to be changed. //$# //$#--------------+------------+----------------------------------------------------------------+ //$# Variable | Value | Comment

| //$# | |

| //$#--------------+------------+----------------------------------------------------------------+ //$ SIGNATURE = 0x87654321 # //$ CRC_SEED = 0x0 # //$# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - -

//$ HWTYPE = MC # //$ VENDOR = TR # Not 'ALU' as described in the spec //$ HWMODEL = BAND08 # //$ MM = 09 # Major Release //$ mm = 01 # Minor Release - not used yet, but keepit here //$ ee = 03 # Edition - not used yet, but keepit here //$#--------------+------------+----------------------------------------------------------------+ //$# //$# //$#

------------------------------- Message Contents ---------------------------

Date post:	04-Jun-2018
Category:	Documents
Upload:	sidy-elbechir-drame
View:	229 times
Download:	0 times

Deliv Note

Documents