Date post: | 03-Jul-2015 |
Category: |
Technology |
Upload: | olympus-ims |
View: | 452 times |
Download: | 5 times |
Quick Start Tutorial
When you first open the case, you’ll find:
To use the analyzer, pull open the battery latch.
The batteries only go in one direction.
The batteries only go in one direction.
To begin, press the power button.
To begin, press the power button.
The radiation safety notice will appear on screen.
After you read it, tap start.
After you read it, tap start.
If this is your first time using your analyzer, make sure you perform a calibration check.
The analyzer will need a calibration check every ten hours.
The analyzer will need a calibration check every ten hours.
To do so, place the calibration check coupon on a flat surface.
To do so, place the calibration check coupon on a flat surface.
Then, place the analyzer window on the coupon.
Then, place the analyzer window on the coupon.
Next tap the calibration check icon on the screen.
Next tap the calibration check icon on the screen.
The calibration check is an X-ray test.
The calibration check is an X-ray test.
The red X-ray indicator light will flash to warn you that X-rays are being emitted.
The red X-ray indicator light will flash to warn you that X-rays are being emitted.
The red X-ray indicator light will flash to warn you that X-rays are being emitted.
The red X-ray indicator light will flash to warn you that X-rays are being emitted.
Please read all manuals provided with your equipment and follow the recommended
safety precautions and techniques.
Please read all manuals provided with your equipment and follow the recommended
safety precautions and techniques.
Please read all manuals provided with your equipment and follow the recommended
safety precautions and techniques.
Do not point the DELTA XRF Analyzer at yourself or anyone else!
Do not point the DELTA XRF Analyzer at yourself or anyone else!
Do not point the DELTA XRF Analyzer at yourself or anyone else!
Please read all manuals provided with your equipment and follow the recommended
safety precautions and techniques.
Once all manuals have been read and the calibration check is performed, your analyzer
will be ready to use.
Once all manuals have been read and the calibration check is performed, your analyzer
will be ready to use.
Your delivered analyzer has already been configured to your specifications.
DELTA XRF Analyzers with an alloy calibration will have the Window Guard System
installed.
For Premium and Professional models capable of measuring lighter elements, you must
remove the Window Guard window.
For Premium and Professional models capable of measuring lighter elements, you must
remove the Window Guard window.
For Premium and Professional models capable of measuring lighter elements, you must
remove the Window Guard window.
For Premium and Professional models capable of measuring lighter elements, you must
remove the Window Guard window.
You must also change the analyzer’s mode to Alloy Plus to test for these elements.
You must also change the analyzer’s mode to Alloy Plus to test for these elements.
You must also change the analyzer’s mode to Alloy Plus to test for these elements.
Testing is a simple, three step process.
Testing is a simple, three step process.
Remember, when the red X-ray indicator light is flashing, X-rays are being emitted.
Remember, when the red X-ray indicator light is flashing, X-rays are being emitted.
Remember, when the red X-ray indicator light is flashing, X-rays are being emitted.
Remember, when the red X-ray indicator light is flashing, X-rays are being emitted.
When the X-ray indicator light is solid red, the X-ray tube inside the analyzer is powered
on, but not emitting X-rays.
When the X-ray indicator light is solid red, the X-ray tube inside the analyzer is powered
on, but not emitting X-rays.
All DELTA analyzers have “hot-swappable” batteries, so you don’t need to power down
just to change out a fresh battery.
All DELTA analyzers have “hot-swappable” batteries, so you don’t need to power down
just to change out a fresh battery.
A count down screen shows you how much time you have to complete the swap.
A count down screen shows you how much time you have to complete the swap.
A count down screen shows you how much time you have to complete the swap.
When you are not using the DELTA XRF analyzer, place it in the docking station.
When you are not using the DELTA XRF analyzer, place it in the docking station.
The docking station will automatically perform three activities.
The docking station will automatically perform three activities.
The docking station will automatically perform three activities.
The docking station will automatically perform three activities.
Quick Start Tutorial