+ All Categories
Home > Documents > Dental - EnvisionTEC · ***Pre-Adjusted by each material module and material dependent. 6. 7. ......

Dental - EnvisionTEC · ***Pre-Adjusted by each material module and material dependent. 6. 7. ......

Date post: 10-Mar-2019
Category:
Upload: lekhanh
View: 219 times
Download: 0 times
Share this document with a friend
20
Dental
Transcript

Dental

Table of Contents

Desktop 3D Printers5 Micro Plus XL5 Vida / Vida HD7 Vida cDLM / Vida HD cDLM9 Pixcera 9 Desktop DDP Plus

Production 3D Printers11 Perfactory 4 DDP Series13 ULTRA 3SP Ortho13 3Dent15 Xtreme / Xede 3SP Ortho 15 Vector 3SP16 Dental Resins

3

Digital Dentistry in ActionEnvisionTEC 3D printers are known for accuracy, surface finish, reliability and speed. Our machines also deliver extreme flexibility with the power to print multiple materials.

Models Castables

AppliancesRestorations

4

5

Micro XL / Vida / Vida HD• Compatible with 3Shape, Dental Wings, and Exocad design software

• Any STL file of a model designed from an impression or an Intra Oral Scanner can be printed

• Capable of printing orthodontic models, partials, surgical guides, indirect bonding trays, crown and bridge models, waxups for crown and bridge applications, and bite guards

• Changeover between materials is quick and easy with no waste

• Long life LED light source with zero maintenance and very low acquisition cost

Machine Specification: Micro XL Vida Vida HDBuild Envelope* : 120 x 74 x 85 mm 140 x 79 x 100 mm 98 x 55 x 100 mm Native Pixel Resolution X / Y: 82 µm / 105 µm 73 µm 50 µm Dynamic Voxel** Resolution in Z : 25 µm to 75 µm 25 µm to 150 µmFootprint: 22.86 x 24.13 x 66.04 cm 39.5 x 35.0 x 78.7 cmWeight Approx: 16 kg 34 kgElectrical Requirement: 110 VAC @ 3A 110V, 3A/ 220V , 2A System specifications are subject to change without notice. *Deviation of +/- 2mm possible. **A voxel is volumetric pixel. ***Pre-Adjusted by each material module and material dependent.

6

7

Vida cDLM / Vida HD cDLM

• Compatible with 3Shape, Dental Wings, and Exocad design software

• Any STL file of a model designed from an impression or an Intra Oral Scanner can be printed

• Capable of printing orthodontic models, partials, surgical guides, indirect bonding trays, crown and bridge models, waxups for crown and bridge applications, and bite guards

• Changeover between materials is quick and easy with no waste

• Long life LED light source with zero maintenance and very low acquisition cost

Machine Specification: Vida Vida Hi-Res Vida Hi-Res C&B

Build Envelope* : 140 x 79 x 100 mm 98 x 55 x 100 mm 90 x 50 x 100 mm

Native Pixel Resolution: 73 µm 50 µm 35 µm

Dynamic Voxel** Resolution in Z : 25 µm to 150 µm

Footprint: 39.5 x 35.0 x 78.7 cm

Weight Approx: 34 kg

Electrical Requirement: 110V, 3A/ 220V , 2A System specifications are subject to change without notice. *Deviation of +/- 2mm possible. **A voxel is volumetric pixel. ***Pre-Adjusted by each material module and material dependent.

8

PixCera Plus / Desktop DDP Plus

• Low-cost, high-resolution desktop 3D printers designed to fit into small areas

• The Pixcera prints up to 20 copings and crowns or seven bridges in under two hours

• The Desktop DDP prints a wide variety of dental applications, including quadrants and dies, drill guides, partials, and full arches.

• Can be operated unattended with maximum reliability

• Low power consumption

Machine Specification: Pixcera Plus Desktop DDP Plus

Maximum Build Envelope: 60 x 45 x 100 mm* 100 x 75 x 100 mm*

Native Voxel Size in XY 43 µm 71 µm

Projector Resolution: 1400 x 1050 Pixels

Dynamic Voxel** Resolution in Z: 25 - 50 µm*** 25 - 50 µm***

Footprint: 45 x 55 x 78cm 45 x 55 x 89cm

Weight Approx: 35kg 40kg

Electrical Requirement: 100 - 120 VAC, 50/60 Hz, single-phase, 2A / 220 - 240VAC, 50/60 Hz, single-phase, 1A

System specifications are subject to change without notice. * Deviation of +/- 2mm possible. **A voxel is volumetric pixel. *** Pre-Adjusted by each material module and material dependent.

9

10

Perfactory® DDP4 Series

• Low cost, user-friendly 3D printer offering ease of maintenance and outstanding reliability

• Produces finest detail in the shortest period of time

• Can print up to 95 units such as coping and crowns or multiple unit bridges in less than 1 hour 45 minutes (P3DDP - 70 units in less than 3 hours)

• Also available in LED-powered variations

Machine Specification: DDP4 DDP4 M DDP4 XL

Build Envelope*: 115 x 72 x 220 mm 160 x 100 x 180 mm 192 x 120 x 180 mm

Projector Resolution: 1920 x 1200 pixels

Native Voxel** Size XY: 60 µm 83 µm 100 µm

ERM Voxel Size XY***: 30 µm 42 µm 50 µm

Footprint: 73 x 48 x 135 cm

Weight Approx: 85 kg

Electrical Requirement: 100 - 120 VAC, 50/60 Hz, single-phase, 5.4A; 220 - 240 VAC, 50/60 Hz, single-phase, 2.4 A ASystem specifications are subject to change without notice. * Deviation of +/- 2mm possible. ** A voxel is volumetric pixel. *** Pre-Adjusted by each material module and material dependent.

11

12

3Dent® / ULTRA 3SP Ortho

• 3Dent and ULTRA 3SP Ortho dental model printers use Scan, Spin, and Selectively Photocure (3SP) Technology

• Features office friendly plug-and-play operation with a built-in touch screen

• Simple user interface with built-in touch screen and low part cost due to minimal material waste

• Low maintenance technology includes an imaging light source with a two-year warrantye

• Models for use in producing high quality orthodontic appliance

Machine Specification: 3Dent ULTRA 3SP Ortho

Maximum Building envelope: 266 x 175 x 76 mm* 266 x 175 x 76 mm*

Voxel** resolution in X & Y: 50 µm 100 µm

Dynamic Voxel Resolution in Z: 50 - 100 µm***

Footprint: 74 x 76 x 117 cm

Electrical Requirement: 100 - 127 VAC, 50/60 Hz, single-phase 8A;

200 - 240 VAC, 50 Hz, single-phase 4A

System specifications are subject to change without notice. * Deviation of +/- 2mm possible. ** A voxel is volumetric pixel.

*** Pre-Adjusted by each material module and material dependent.

13

14

Xede 3SP Ortho / Xtreme 3SP Ortho / Vector

• Xede 3SP® Ortho, Xtreme® 3SP Ortho and Vector dental model printers use Scan, Spin, and Selectively Photocure (3SP®) Technology and feature

larger build envelopes for high-production facilities

• Features office friendly plug-and-play operation with a built-in touch screen

• Simple user interface with built-in touch screen and low part cost due to minimal material waste

• Low maintenance technology includes an imaging light source with a two-year warranty

Machine Specification: Xede 3SP® Ortho Xtreme 3SP® Ortho Vector

Maximum Build Envelope: 457 x 457 x 102 mm 254 x 362 x 102 mm* 300 x 200 x 200 mm

Resolution in X & Y: 100 µm 100 µm 100 µm

Dynamic Voxel** Resolution in Z: 50 - 100 µm*** 50 - 100 µm*** 50 - 100 µm

Footprint: 178 x 190 x 165 cm 165 x 165 x 165 cm 74 x 76 x 117 cm

Electrical Requirement: 110-120/220-240 VAC, single-phase, 15 A. 110 VAC @ 3A

System specifications are subject to change without notice. * Deviation of +/- 2mm possible. **A voxel is volumetric pixel. *** Pre-Adjusted by each material module and material dependent.

15

16

Industry-Leading Dental Portfolio

E-Dent 100/400 is the optimal material for the direct printing of crown, bridge and full roundhouse temporary restorations. This material can be characterized.

FDA approved and CE class IIa

E-Guard is a biocompatible, transparent material for the production of accurate bite splints, night guards and retainers.

FDA approved and CE class IIa

E-Denture natural looking denture base material has low shrinkage, allowing for exceptional fit when producing removable denture bases.

FDA approved and CE class IIa

E-Gum is a flexible material that simulates the patient’s gum in flexible gingiva masks for the successful restoration of implants.

E-Guide Tint is a material ideal for the production of accurate drill guides used in implant surgery.

FDA approved and CE class 1

E-IDB is a new material for the production of indirect bonding trays for quick and accurate placement of brackets.

FDA approved and CE class 1

17

PIC 100 C is a specialized castable formula for use with cDLM technology to create high quality copings, crowns, bridges and partial denture frameworks.

Press-E-Cast produces highly accurate castable wax copings, crowns and bridges with thin walls for a tight fit. It is ideal for using a rapid burnout when casting or it can also be used for pressed ceramic restoration preparation techniques.

E-Partial is a castable material suitable for use in the production of crowns and partial denture frameworks for direct investment casting in semi-precious metals. It’s high flexural strength ensures clasp flex without breakage.

E-Model Light is the most versatile model material on the market. It is ideal for high precision crown and bridge models as well as orthodontic models for use with vacuum forming, spray-on, doughing and soldered methods of appliance fabrication.

cDLMMicro cDLMVida cDLM

3SPVector 3SP3Dent 3SPXtreme 3SPXede 3SP

PerfactoryP4 DDPP4 DDP MP4 DDP XL

DesktopMicroVidaOriginal

Our printers can process multiple materials on the same machine — delivering the ultimate in 3D printing flexbility. The popular Vida desktop can process models, castables, restorations and appliances, all using the same build tray.

18

Flexible 3D Printers EnvisionTEC 3D printers are optimized for a number of materials representing a broad portfolio of dental and orthodontic applications. We are in constant communication with the R&D teams of the most recognized dental CAD software companies to ensure a seamless workflow that delivers consistent manufacturing quality. Whether using 3Shape CAMbridge™ or DWOS-RPM from Dental Wings, automatic preparation is optimized for all EnvisionTEC printers. From optimal placement to orientation to support generation, job creation is one click away. Identification tags may be automatically placed next to each item to minimize processing after printing. Design parameters in 3Shape and Dental Wings have been optimized to deliver a set of Standard Operating Parameters that are application-specific and provided upon request.

Machines Waxups Temporaries PartialsOrthodontic

Appliances and Aligners

Models Drill Guides

Micro Plus XL

Vida

Vida HD

Vida cDLM

Vida HD cDLM

Pixcera

DDDP *

P4 DDP

P4 DDP M

P4 DDP XL

3Dent®

ULTRA® 3SP® Ortho

Vector 3SP

Xede 3SP® Ortho

Xtreme 3SP® Ortho

Specifications are subject to change without notice. *Waxups may be made on the DDP4 M only with E-Partial(EC1000) but not with Press-E-Cast (WIC300)

17

EnvisionTEC GmbHBrüsseler Straße 51D-45968 GladbeckGermanyFon: +49 2043 9875 0www.envisiontec.com [email protected]

EnvisionTEC, Inc.15162 South CommerceDearborn, MI 48120USAPhone: +1 313 436 [email protected]

MK-

IND

-Den

talB

ookl

et-V

2018

-112

-FN

-EN


Recommended