English Remedial 4

How are manufactured the cars?

Ramon Alberto Gonzalez QuevedoIMT

Fist. The pieces are made by separate.It starts with large rolls of sheets, they are cut in many sizes.

After this sheets are crushed by large presses. The presses made that the sheets get some form, for example doors, trunks awnings, etc.

The chassis is welded and some pieces that it is required.Often, all the pieces are submerged in big tanks with chemicals to prevent the foil from rusting and to remove impurities

After the pieces are together to the chassis, for example the doors, trunks awnings, etc.

In this part the whole structure is painted inside and out by praimer and other chemicals that help clog pores

After that since this it verified that all is well, paint is applied to the desired colorMore late the cars are stuck in large kilns for drying and perfect finish.

Next, the other parts are together, starting with everything inside as seats, carpets, lights, dashboard, windows, controls, etc.

After, The mechanical part is attached as tires, engine, suspension, etc.

Finally the necessary tests done to check that everything is in perfect condition

The car is ready for sale