Description Conservatory awning W10 - Bright a Blind · 2018. 2. 26. · Conservatory awning W10...

234 450507en/12.2013

Description

Conservatory awning W10

1 Cover panel

2 Ceiling supports

3 Shaft

4 Fabric

5 Lateral guidance with secudrive®

6 Front rail

ApplicationInternal sun shading system for shading conservatories,

patios roofs and pergolas with flat roof pitches.

For the first time in the field of sun shading with secudrive®

guiding of the awning fabric along the entire ordering length

by means of a spring steel strip directly in the guide rail.

When extending the awning the spring steel strip pushes the

fabric in the guide rails, leaving no light gap and achieving

optimum fabric tension.

OperationMotor

thermal protection and built-in capacitor comprised.

Torque overload protection: Motor switches off automati-

cally in the upper and lower limit posi-

tions

Voltage: 230 V AC

Frequency: 50 Hz

Degree of protection: IP 44

Connecting cable: 500 mm

Plug-in connector: Hirschmann coupling wired to motor

cable, comprised for customer connec-

tion, including enclosure

Radio motor or radio plug receiver (optional)

EWFS hand-held transmitter comprised, 1 channel

Cover panel (1)two-piece, closed at the front

Material: aluminium, extruded

Dimensions (w x h): 196 x 159 mm

Surface: powder-coated, anodising optional

Fixing: using a ceiling support

Note: A deviation of up to 3 mm is possible for the cover

panel closure.

Ceiling support (2)Material: stainless steel

Dimensions (w x h): 40 x 75.5 or 129 mm

Surface: plain

Shaft (3)Fabric shaft

Material: aluminium

Material thickness: 1.6 mm

Dimensions (Ø): 86.2 mm

Profile: groove tube

Surface: plain

Motor shaft

Material: aluminium

Material thickness: 1.6 mm

Dimensions (Ø): 70 mm

Profile: groove tube

Surface: plain

D22853

Fig. 347: Conservatory awning W10

1

2

4

6

5

3

450507en/12.2013 235

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems

Description


Fabric (4)Fabric qualities: Acrylic Standard/Lumera

Acrylic Perfora

Soltis 92

More information about fabrics on

Page 400

Designs: according to current WAREMA awning

collection

Special fabrics not included in our current awning collection

are only available upon request and at a surcharge.

Lateral guide (5)with secudrive® in rail

with mounting groove

Material: aluminium, extruded



Fixing: bracket, from page 249

A spring steel strip guides the fabric directly in the guide rail.

It can also be fixed to WAREMA patio roofs as well as

wooden and aluminium pergolas.

Lead profile (6)Material: aluminium, extruded



Fixing and connecting partswithin the awnings

Material: A2 steel or aluminium

ColoursPowder coating of aluminium parts with chrome-free pre-

treatment according to valid RAL CLASSIC colour chart

(except camouflage and luminous colours) or in DB colours

701, 702 and 703 as well as eight textured colours (W4914

- W4921), four anodized-look colours (WC31 - WC34) and

further colours according to WAREMA standard colour fan

(in WAREMA colour specification).

Other colour specifications, special colours or anodising are

available upon request and at a surcharge.

Checklist– Provide drawings of the conservatory or the patio roof or

provide a sketch and also a photo (if possible)

– Fabric colour and quality

– Frame colour (powder-coated or anodised)

– Type of guide rail bracket

– Determine position of drive (operation side of cover

panel in direction of movement)

– Arrange for supply of on-site cable

– Arrange for housing of plug connection

Safety instructions– In gyms, multi-purpose halls or similar, the awning must

be protected against shocks (ball games), impacts etc.

by appropriate features like fences, nets etc.

– Do not use in indoor pools due to the chlorine atmos-

phere.

– It is imperative that the installation instructions and the

relevant appendices are adhered to.

– Accident prevention regulations from trade associations

must be observed.

– Specifications of the manufacturers of dowels and fixing

materials must be observed.

– The fixing points have to be checked once a year!

Information on operation and electrical connection:

The following connection conditions must be taken into con-

sideration when controlling electronic motors:

1. It must be ensured that the drives are operated via

locked switching units. The drives switch to program-

ming mode if voltage is simultaneously applied to the up

and down running direction. In this case the built-in elec-

tronics lose their saved limit positions and await new pro-

gramming.

2. Switching devices with the so-called 3-wire conductor

technique (e.g. Rademacher timer Clip) cannot be used

because these devices draw their supply voltage from

the drive and the electronics in the motors do not build

up enough voltage.

If both conditions have been met, the electronic motors can

be operated with any roller shutter controller or bus system

(via actuators).

236 450507en/12.2013

Weights/run times/guide rail


Diagram for determining the run time of a conservatory

awning W10

How to read the diagram:

Awning with ordering length of 3500 mm and drive speed

of 17 rpm has a run time of approx. 38 sec.

Guide rail

Diagram for determining the weight of a conservatory

awning W10

How to read the diagram:

Awning with 4000 mm ordering length, 3000 mm order

width and Soltis 92 fabric has a weight of approx. 53 kg.

w04237v2

Fig. 348: Diagram for determining the run time for type W10

Guide rail 45x60mm (w x h)

KD050910001

Fig. 349: Guide rail

0 10 20 30 40

Run time in sec.

Ordering width in m

m

50 60 70 80

4000

3000

2000

1000

Drive 17 rpm

45

60

22.522.5

Gewicht_W10_Acryl

Gewicht_W10_Soltis

Fig. 350: Diagram for determining the weight of type W10

Acrylic fabric

0,01000 2000 3000 4000 5000 6000

10,0

20,0

30,0

40,0

50,0

60,0

70,0

80,0

90,0

Ordering width in mm

Weight in kg

1000 mm2000 mm3000 mm4000 mm

Soltis fabric

0,0

10,0

20,0

30,0

40,0

50,0

60,0

70,0

Weight in kg

1000 1500 2000 2500 3000 3500Ordering width in mm

1000 mm2000 mm3000 mm4000 mm

KD050910038v1

Fig. 351: Cover panel

158

196

239

65

45

61

450507en/12.2013 237

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems

Application examples/sizes/construction limit values/definitions


Application example

You can also use our free planning programme at

www.sonnenschutzplaner.de for planning the sun shading

control systems – configure the product and create a tech-

nical drawing for integrating into your plans.

Construction limit values in mm W10

Note:

Conservatory awnings type W10 are only available as indi-

vidual units, i.e. no coupled units and no motor/end bearing

situations are possible! Each awning requires 2 single guide

rails.

DefinitionsThe drive end or operation side is always seen from the

cover panel in extension direction.

Order width= from one guide rail fixing axis to the next fixing

axis = axial dimension

Guide rail bracket

Ceiling supports

kd050910002

Fig. 352: Application example

angled

Internal sun

shading sys-

tem

Type of fabric W10

W10 direction of

movement "from

bottom to top"

Max. width Acrylic – all variants – 6000 6000

Soltis 92 3500 3500

Min. width Acrylic – all variants – 600 600

Soltis 92 600 600

Max. length Acrylic – all variants – 4000 4000

Soltis 92 4000 4000

Min. length Acrylic – all variants – 950 950

Soltis 92 950 950

Max. surface

area (m2)

Acrylic – all variants – 24 24

Soltis 92 14 14

Roof pitch 0°–30° 0°–20°

Length (mm) Guide rail brackets per rail

up to 1799 2

1800 to 2899 3

2900 to 4000 4

Width (mm) Ceiling supports

up to 3999 2

4000 to 6000 3

238 450507en/12.2013

Measuring instructions and data sheet


kd050910003v1

Fig. 353: Conservatory awning W10

min. 300max. 500

30

159

224

239

min. 100max. 300

max. 1200

Order length

3

60

Roof pitc

h

Required space for mounting cover panels on

brackets

kd050910004v1

Fig. 354: Required space for mounting cover panels on brackets

1.5 6.5

min. 30 max. 90

min

. 40

159

450507en/12.2013 239

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems

Measuring instructions and data sheet


Attention: Order width = middle of guide rail – middle of guide rail. The entire awning (incl. side covers) is wider by

57 mm. Please note when ordering!

With units connected in series, it is possible to attach 2

guide rails with one bracket.

Individual unit

kd050910005_1v1

Units connected in series (mechanical coupling not possible)

kd050910005_2v1

Fig. 355: Measuring instructions for drives

(dimension including side cover)

4545

3

max.

4000

max. 6000 (acrylic)

max. 3500 (Soltis)

45

60

45

60

28.9

22.5

28.9

All dimensions in mmPossible drive position

min. 600 (motor)

Soltis fabric: max area 14 m²

Acrylic fabric: max area 24 m²

(dimension including side cover)

45

3

max.

4000

max. 6000 (acrylic)

max. 3500 (Soltis)

45

60

45

60

28.9

45

3

max.

4000

max. 6000 (acrylic)

max. 3500 (Soltis)

45

60

45

60

28.9

90

45

22.5

All dimensions in mmPossible drive position

min. 600 (motor)

Soltis fabric: max area 14 m²

Acrylic fabric: max area 24 m²

min. 600 (motor)

side covers omitted

240 450507en/12.2013

Mounting examples


With units connected in series, it is possible to attach 2

guide rails with one bracket.

Unit variations – symbolic illustration

KD050910007

Fig. 356: Unit variations W10

45

22,5

22,522,5

4545

90

60

60

2 x guide rail 45x60:

EM

Motor - end bearing situation

E E

End bearing - end bearing situation

MM

Motor - motor situation

Important: mechanicalcoupling not available!

Coupling situation

Motor - end bearing situation

ME

E

M

Guide rail 45x60: Motor situation

End bearing situation

Not possible with radio motor

BoxBox

BoxBox

BoxBox

BoxBox

Box

Box

450507en/12.2013 241

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems

Mounting examples


Overview of mounting situations – overview of brackets and ceiling supports see page 249f.

KD050910008_1

Fig. 357: Conservatory awning W10 on patio roof T1 – distance 6.5 mm – bracket no. 47 with ceiling support

KD050910008_2

Fig. 358: Conservatory awning W10 on patio roof T1 – distance 60 mm – bracket no. 101 with ceiling support

KD050910008_3

Fig. 359: Conservatory awning W10 on third-party product – distance 6.5 mm – bracket no. 48 with ceiling supportKD050910008_4

Fig. 360: Conservatory awning W10 on third-party product – distance 60 mm – bracket no. 101 with ceiling support

AA A BA B

242 450507en/12.2013

Mounting examples


Detail: Mounting conservatory awning W10 on patio roof T1 – distance 6.5 mm

KD050910015

Fig. 361: Detail: Mounting W10 on patio roof T1 – distance 6.5 mm

KD050910009

Fig. 362: Detail: Mounting W10 on patio roof T1 – rafters protruding

min. 100

max. 300max. 1200

239

196

159

3Length of guide rail

60

224

min. 300

max. 500

Order length

min. 30

min. 5Order length

Attention: 4 to 10 mm

All dimensions in mm

450507en/12.2013 243

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems

Mounting examples


Detail: Mounting conservatory awning W10 on patio roof T1 – distance 6.5 mm

KD050910015v1

Fig. 363: Detail: Mounting W10 on patio roof T1 – distance 6.5 mm

KD050910011

Fig. 364: Detail: Mounting W10 on patio roof T1 – rafters flush

min. 100

max. 300max. 1200

239

196

159

3Length of guide rail

60

224

min. 300

max. 500

Order length

min. 30

min. 5Order length


244 450507en/12.2013

Mounting examples


Detail: Mounting conservatory awning W10 on patio roof T1 – distance 60 mm

KD050910016v1

Fig. 365: Detail: Mounting W10 on patio roof T1 – distance 60 mm

KD050910010

Fig. 366: Detail: Mounting W10 on patio roof T1 – rafters protruding

159

239

196 Length of guide rail 3

224

Order length

60

min. 300

max. 500 max. 1200

min. 100

max. 300

min. 30

min. 5Order length


450507en/12.2013 245

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems

Mounting examples


Detail: Mounting conservatory awning W10 on patio roof T1 – distance 60 mm

KD050910016v1

Fig. 367: Detail: Mounting W10 on patio roof T1 – distance 60 mm

KD050910012

Fig. 368: Detail: Mounting W10 on patio roof T1 – rafters flush

159

239


224

Order length

60

min. 300

max. 500 max. 1200

min. 100

max. 300

min. 30

min. 5Order length

All dimensions in mmAll dimensions in mm

246 450507en/12.2013

Mounting examples


Detail: Mounting conservatory awning W10 on third-party product – distance 6.5 mm

KD050910017v1

Fig. 369: Detail: Mounting W10 on third-party product – distance 6.5 mm

KD050910013

Fig. 370: Detail: Mounting W10 on third-party product

159

239


60

224

min. 300

max. 500 max. 1200

min. 100

max. 300

Order length

min. 30min. 5Order length


450507en/12.2013 247

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems

Mounting examples


Detail: Mounting conservatory awning W10 on third-party product – distance 60 mm

KD050910018

Fig. 371: Detail: Mounting W10 on third-party product – distance 60 mm

KD050910014

Fig. 372: Detail: Mounting W10 on third-party product

196 Length of guide rail

300

min. 100

max. 300max. 1200

min. 300

max. 500

Order length

224

3

239

min. 30Order length

min. 5


248 450507en/12.2013

Details


Guide rail fixation

Note:

It is imperative to observe the specifications of the manufac-

turers of dowels and fixing materials!

KD050910020

Fig. 373: Ceiling mounting

15

Obse

rve m

in.

thic

kness

!

The fixing material depends on the substructure!

Note minimum distance from

edge!

KD050910122

Fig. 374: Wall installation

35

Aluminium anglebracket 60x40x6

Note

min

imum

dis

tance fro

m e

dge!

90

120

3

The fixing material depends on the mounting substructure!

450507en/12.2013 249

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems

Guide rail brackets and ceiling brackets


Only for mounting on WAREMA patio roof T1

Bracket no. 47 (W10) Ceiling bracket for bracket 47


For mounting single guide rails in series-mounted units

Bracket no. 49 (W10) Bracket no. 51 (W10)

KD050910022

Fig. 375: Overview of guide rail brackets and ceiling brackets (mounting on patio roof T1)

250 450507en/12.2013

Guide rail brackets and Ceiling supports


Mounting on third-party product


Bracket no. 53 (W10) Bracket no. 52


For mounting single guide rails in series-mounted units

Bracket no. 49 (W10)

KD050910022

Fig. 376: Overview of guide rail brackets and ceiling brackets (mounting on third-party product)

450507en/12.2013 251

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems



Mounting on WAREMA patio roof T1

Bracket no. 47 (W10) Ceiling bracket for bracket no. 47

KD050910023

KD050910027

Fig. 377: Guide rail brackets for mounting on T1, distance 6.5 mm Fig. 378: Ceiling supports for mounting on T1, distance 6.5 mm


KD050910025

KD 050910025

Fig. 379: Guide rail brackets for mounting on T1, distance 60 mm Fig. 380: Ceiling supports for mounting on T1, distance 60 mm

Z

Z

60

21.5

45

Order width22.5

39

31

60

9

8Ø172840

75.5

30

15

2040

48

3

Ø7

9

110

5090120

20

22.5 Order width

45

60

75

40

86

48

2040

30

2840

129

15

3

252 450507en/12.2013



Mounting on WAREMA patio roof T1 – Coupled units

Bracket no. 101 (see Fig. 382) can also be used for mount-

ing series-mounted units on T1.

Mounting on patio roof with side glazing (Sunflex)

Attention!

When using this guide rail bracket it has to be mounted

before measurement of the side glazing (Sunflex).

Bracket no. 51 (W10)

KD050910033

Fig. 381: Guide rail brackets for coupled units (mounting on T1)

39

60

Order widthOrder width

45

==

21.5

31

60

9

8Ø17

M5

Brackets for side glazing by Sunflex (W10)

KD050910037

Fig. 382: Fixing W10 on T1 with side glazing (Sunflex)

55

6.5

55

5

12

100

55

5

Order width

450507en/12.2013 253

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems



Mounting on third-party product

Bracket no. 48 (W10) Ceiling supports for brackets no. 48, 52 and 53

KD050910024v1

KD050910028

Fig. 383: Guide rail bracket for mounting on third-party product,

distance 6.5 mm, mounted on the guide rail at the factory

Fig. 384: Ceiling supports for mounting on third-party product, dis-

tance 6.5 mm

Bracket no. 53 (W10) Bracket no. 52 (W10)

KD050910040

KD050910118a

Fig. 385: Guide rail brackets for mounting on third-party product Fig. 386: Guide rail brackets for mounting on third-party product,

lateral fixing

940

40

Ø6

60

(8.5)14

22.545

Order width

5EPDM film 1.5 mm

6.5

pre-mounted bracket!

2840

75.5

48

3

6.5

712

88

60

22.5

45

Order width

6

4.5

22.5

84.5

80

18 22

90

120

9

20

Ø13

Ø7

17.5 = adjust-ment range

+10-10

90

40

90

60

22.5

45

60

6

9

25

6

14.5

Order width

90

120

25

40

7

20

20

254 450507en/12.2013



Mounting on third-party product – Coupled units


KD050910026

KD 050910030

Fig. 387: Guide rail brackets for mounting on third-party product,

distance 60 mm

Fig. 388: Ceiling supports for mounting on third-party product, dis-

tance 60 mm

KD050910035v1

KD050910036

Fig. 389: Guide rail brackets for coupled units (mounting on third-

party product), distance 6.5 mm

Fig. 390: Guide rail brackets for Coupled units (mounting on third-

party product), distance 60 mm

110

20

Ø7 9

38.6 60

2040

5090

120

22.5 Order width

45

60

129

28

40

712

88

6.548

3

= Order width

6.5

=Order width

6.5

17

45

940

40

Ø6

EPDM film 1.5 mm

pre-mounted bracket!

90

110

80

8

60

Order widthOrder width

45

==

20

50

60

450507en/12.2013 255

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems

Description/measuring instructions


Direction of movement "from bottom to top"

Field of applicationInternal conservatory awnings W10 are fitted under glazing

and can be used with direction of movement "from bottom

to top".

Notes:

– Conservatory awnings W10 are only available as individ-

ual units, i.e. no coupled units and no motor/end bearing

situations are possible! Each awning section requires 2

guide rails of its own!

– Due to the cover panel opening in extension direction

there is an increased risk of the fabric becoming soiled.

– For construction limit values see page 237.

Order dataPlease specify clearly on the order form:

– W10 - direction of movement "from bottom to top"

– State roof pitch

Measuring instructions

KD050910019v1

Fig. 391: Measuring instructions for conservatory awning type W10 – direction of movement "from bottom to top". Mounting on T1

224

239

3

60

min. 100max. 300

min. 300max. 500

max. 1200

Order length

159

Roof pitch

approx. 20°


256 450507en/12.2013

Fixing material


Fixing material on patio roof T1

Fixing material on aluminium

Fixing material on wood

Fixing material on steel

Designation Order no. Unit

Bracket no. 47 Quantity

Ceiling supports 503321 Quantity

Spacer for ceiling support 504097 Quantity

Screw DIN 933 M6x30 732014 Quantity

Washer DIN 9021 6.4 742006 Quantity

Slot nut M6 retractable M6 506043 Quantity



Screw Chipboard screw with pan head A2 4.5x40 746119 Quantity


Screw DIN 7976 C 4.8x32 721006 Quantity

Washer DIN 9021 A2 5,3 742005 Quantity



Screw Chipboard screw with pan head A2 4x60 746157 Quantity






Screw DIN 912 VA M5x40 730054 Quantity




450507en/12.2013 257

Overview

Articulated arm

/cassette awnings

Accessories

Patio awnings

Pergola awnings

Patio roofs

Conservatory

awnings

Horizontal

awnings

Dutch canopy

awnings

Patio side screens

Sun sails/fabrics

Control systems

Fixing material


Fixing material on patio roof T1

Fixing material on aluminium

Fixing material on wood

Fixing material on steel







Spacer for ceiling support 504097 Quantity













Screw DIN 7996 4.5x40 728011 Quantity



Screw DIN 7996 4.5x50 790283 Quantity









Date post:	21-Apr-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

Description Conservatory awning W10 - Bright a Blind · 2018. 2. 26. · Conservatory awning W10...

Documents