thylia
ElEctrical
remote magnetic control gear
35W Metal Halide
70W Metal Halide
150W Metal Halide
remote electronic control gear 35W-150W Metal Halide
ACCESSORIES
ORDERING DATA
DEScriPtiON laMP laMP HOlDEr lUMEN MaSS (KG)
THYLIA 35W MH-T HCI-T 35W NDL G12 3 500 2.6
THYLIA 70W MH-T HCI-T 70W NDL G12 6 800 2.6
THYLIA 150W MH-T HCI-T 150W NDL G12 14 500 2.6
BaSE aND POlES FOr MOUNtiNG HEiGHtS OF rEFErENcE (iN cENtrE SEctiON)
THYLIA - POLE BASE - facetted 1/2 stem
THYLIA - POLE BASE - facetted 3/4 stem
THYLIA - Straight pole section 4.2 / 6.2 / 8.1m B, D, M
THYLIA - Simple curve pole section 4.2 / 6.2 / 8.1m A, C, F, G, H, J, K, L
THYLIA - Double curve section 4.2 / 6.2 / 8.1m E, I, N, O
Wall BracKEt
THYLIA - Wall Bracket P
Standard colour: AKZO 900 grey sanded Any other colour available on request.
SANS 475SANS 60598
Manufactured and assembled by BEKA Schréder (Pty) Ltd - South AfricaManufacturers of luminaires and Glass Fibre Poles01/16
BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa T: +27 11 238 0000 | F: +27 11 238 [email protected] | www.beka-schreder.co.za
610 650 6501300
800 1100 1100 1100 800
650
2200 1600
1400 1400 1400 1100 1100
22002800
700
IA B C D E F G H J K L M N O P
8,10m
6,20m
4,20m
2,80m
Designed by Michel Tortel, the THYLIA range is an ideal
tool for use in urban street lighting. The range allows
the designer to produce a personalised project, as even
the most daring forms of innovation and originality can
be used. In fact, the THYLIA range is available in a wide
range of conf igurations, f inishes and heights of up to 8
metres. One, two, three or four poles can be mounted on
a base. A facetted steel base and a steel wall bracket are
available.thylia
DIMENSIONS IN MM
APPLICATIONS• Urban centres
• Prestigious residential street lighting
• Commercial districts
• Plazas
KEY ADVANTAGES• Contemporary design
• High performance µR® (micro-reflector) system
• Lamp compartment - IP 66 Sealsafe®
• Suitable for use with compact ceramic MH lamps
• Various pole configurations available
THE LUMINAIREEquipped with a µR® (micro-reflector), the luminaire of the
THYLIA range is characterized by its extremely small size which
allows it to blend in completely with the urban landscape.
The µR® (micro-reflector) has been developed by Schréder to
satisfy both aesthetic and photometric requirements.
HOUSINGConsisting of a die-cast aluminium cover and body to which a
glass protector is sealed.
ø200
2 80
0
ø100 Entry Hole
ø330
700
15 B
ase
plat
e
Access Door100 x 260
22 x 45Slot
300400
300
400
3/4 stem base
194
60
336
130
312
LIGHT DISTRIbUTIONSLight distribution1659 reflector
Light distribution1754 reflector
Electronic data files can be downloaded from www.beka-schreder.co.za/knowledge-base
REFLECTORThe 1659 µR® (micro-reflector) is equipped with the Sealsafe®
system, which was developed by Schréder and guarantees
an IP 66 tightness level, as well as sustained high levels of
photometric performance. Two different reflector distributions
are available, providing the appropriate light distribution for
the application.
ACCESSAfter the closing handle has been loosened in one move,
the cover can be raised, thereby allowing access to the lamp
support plug. The control gear is not an integral part of the
luminaire and is mounted in the base of the pole or wall bracket.
SAbS MARKS• SANS 60598-2-3 safety mark
• SANS 475 performance mark
INGRESS PROTECTION• Optical compartment: IP 66 - Sealsafe®
• Luminaire compartment: IP 66
ø160
2 60
0
700
15 B
ase
plat
e
ø280
ø100 Entry Hole
22 x 45Slot
300400
300
400
1/2 stem base
Access Door100 x 260
610 650 6501300
800 1100 1100 1100 800
650
2200 1600
1400 1400 1400 1100 1100
22002800
700
IA B C D E F G H J K L M N O P
8,10m
6,20m
4,20m
2,80m
Designed by Michel Tortel, the THYLIA range is an ideal
tool for use in urban street lighting. The range allows
the designer to produce a personalised project, as even
the most daring forms of innovation and originality can
be used. In fact, the THYLIA range is available in a wide
range of conf igurations, f inishes and heights of up to 8
metres. One, two, three or four poles can be mounted on
a base. A facetted steel base and a steel wall bracket are
available.thylia
DIMENSIONS IN MM
APPLICATIONS• Urban centres
• Prestigious residential street lighting
• Commercial districts
• Plazas
KEY ADVANTAGES• Contemporary design
• High performance µR® (micro-reflector) system
• Lamp compartment - IP 66 Sealsafe®
• Suitable for use with compact ceramic MH lamps
• Various pole configurations available
THE LUMINAIREEquipped with a µR® (micro-reflector), the luminaire of the
THYLIA range is characterized by its extremely small size which
allows it to blend in completely with the urban landscape.
The µR® (micro-reflector) has been developed by Schréder to
satisfy both aesthetic and photometric requirements.
HOUSINGConsisting of a die-cast aluminium cover and body to which a
glass protector is sealed.
ø200
2 80
0
ø100 Entry Hole
ø330
700
15 B
ase
plat
e
Access Door100 x 260
22 x 45Slot
300400
300
400
3/4 stem base
194
60
336
130
312
LIGHT DISTRIbUTIONSLight distribution1659 reflector
Light distribution1754 reflector
Electronic data files can be downloaded from www.beka-schreder.co.za/knowledge-base
REFLECTORThe 1659 µR® (micro-reflector) is equipped with the Sealsafe®
system, which was developed by Schréder and guarantees
an IP 66 tightness level, as well as sustained high levels of
photometric performance. Two different reflector distributions
are available, providing the appropriate light distribution for
the application.
ACCESSAfter the closing handle has been loosened in one move,
the cover can be raised, thereby allowing access to the lamp
support plug. The control gear is not an integral part of the
luminaire and is mounted in the base of the pole or wall bracket.
SAbS MARKS• SANS 60598-2-3 safety mark
• SANS 475 performance mark
INGRESS PROTECTION• Optical compartment: IP 66 - Sealsafe®
• Luminaire compartment: IP 66
ø160
2 60
0
700
15 B
ase
plat
e
ø280
ø100 Entry Hole
22 x 45Slot
300400
300
400
1/2 stem base
Access Door100 x 260
thylia
ElEctrical
remote magnetic control gear
35W Metal Halide
70W Metal Halide
150W Metal Halide
remote electronic control gear 35W-150W Metal Halide
ACCESSORIES
ORDERING DATA
DEScriPtiON laMP laMP HOlDEr lUMEN MaSS (KG)
THYLIA 35W MH-T HCI-T 35W NDL G12 3 500 2.6
THYLIA 70W MH-T HCI-T 70W NDL G12 6 800 2.6
THYLIA 150W MH-T HCI-T 150W NDL G12 14 500 2.6
BaSE aND POlES FOr MOUNtiNG HEiGHtS OF rEFErENcE (iN cENtrE SEctiON)
THYLIA - POLE BASE - facetted 1/2 stem
THYLIA - POLE BASE - facetted 3/4 stem
THYLIA - Straight pole section 4.2 / 6.2 / 8.1m B, D, M
THYLIA - Simple curve pole section 4.2 / 6.2 / 8.1m A, C, F, G, H, J, K, L
THYLIA - Double curve section 4.2 / 6.2 / 8.1m E, I, N, O
Wall BracKEt
THYLIA - Wall Bracket P
Standard colour: AKZO 900 grey sanded Any other colour available on request.
SANS 475SANS 60598
Manufactured and assembled by BEKA Schréder (Pty) Ltd - South AfricaManufacturers of luminaires and Glass Fibre Poles01/16
BEKA Schréder (Pty) Ltd | 13 West View Road | P.O. Box 120 | Olifantsfontein | 1665 | South Africa T: +27 11 238 0000 | F: +27 11 238 [email protected] | www.beka-schreder.co.za