Winnipeg, MB Ph: 204-262-5900 Red Lake, ON Ph: 807-735-3011 Thompson, MB Ph: 204-677-5977 Snow Lake, MB Ph: 204-358-7992 Flin Flon, MB Ph: 204-687-6533 Saskatoon, SK Ph: 306-651-2727 Edmonton, AB Ph: 780-960-6692 www.multicretesystems.com MULTICRETE TECHNICAL DATA SHEET Underground Hybrid-Wet® Shotcrete Bulk Solution DESCRIPTION Multicrete specializes in the designing and manufacturing of Underground Hybrid-Wet® Bulk Shotcrete Storage Mix-plant solutions tailored to compliment your existing mine infrastructure. Utilizing bulk bags bulk cassettes, bulk dry shotcrete can be transported underground from surface . Material can then be called upon on demand 24/7, and loaded dry directly into a Bulk Carrier/Application unit such as the HW10H Hybrid-Wet® Shotcrete Carrier unit can then transport the product to the shoot site, reducing time and travel. PURPOSE The underground Hybrid-Wet® Bulk Shotcrete Unload Feed Hopper For Bulk Dry Material Compatible With Dry Bulk Bag, Bulk Bag Cassette, or Bulk Cassette • Completely portable for flexibility • Feed hopper can be used with bulk bags or cassettes • Discharge auger swings against drift wall when not in use, allowing clearance for rock haulers, etc. SPECIFICATIONS • All auger flighting 3/8" thick abrasion resistant steel • All augers 1.4 service factor or better • Unload bag or cassette in 2-3 minutes • CSA approved electrical components • Each unit can be custom fabricated to meet customers' needs • Station is fastened to drift wall and back, can be relocated as needed
Multicrete specializes in the designing and manufacturing of Underground Hybrid-Wet® Bulk Shotcrete Storage, Loading and Mix-plant solutions tailored to compliment your existing mine infrastructure. Utilizing bulk bags or bulk cassettes, bulk dry shotcrete can be transported underground from surface to a Portable Load Station. Material can then be called upon on demand 24/7, and loaded dry directly into a Bulk Carrier/Application unit such as the HW10H Hybrid-Wet® Shotcrete Carrier. An efficient means of moving bulk dry material with minimal dust. Once loaded, the unit can then transport the product to the shoot site, reducing time and travel.
PURPOSE
The underground Hybrid-Wet® Bulk Shotcrete Loading System allows the transference of bulk dry material from bag or cassette to carrier with the added benefit of being completely portable.
Unload Feed HopperFor Bulk Dry Material
Compatible WithDry Bulk Bag, Bulk Bag
Cassette, or Bulk Cassette
• Completely portable for flexibility• Feed hopper can be used with bulk bags or cassettes• Discharge auger swings against drift wall when not in
use, allowing clearance for rock haulers, etc.
SPECIFICATIONS
• All auger flighting 3/8" thick abrasion resistant steel• All augers 1.4 service factor or better• Unload bag or cassette in 2-3 minutes• CSA approved electrical components• Each unit can be custom fabricated to meet customers'
needs• Station is fastened to drift wall and back, can be
relocated as needed
Winnipeg, MBPh: 204-262-5900
Red Lake, ONPh: 807-735-3011
Thompson, MB Ph: 204-677-5977
Snow Lake, MBPh: 204-358-7992
Flin Flon, MBPh: 204-687-6533
Saskatoon, SKPh: 306-651-2727
Edmonton, ABPh: 780-960-6692
www.multicretesystems.com
MSI PORTABLE MIXING STATIONSALES DATA SHEET
www.multicretesystems.com
MSI PORTABLE MIXING STATIONSALES DATA SHEET
FEATURES
The ideal shotcrete mixing solution for underground applications. This unit will accept dry, pre-mixed shotcrete, mix it to exact water/cement ratio and load it into an awaiting Transmixer for transport to application site. Produces a 5 cubic yard load in 12-15 minutes!
MULTICRETE’S PORTABLE MIXING STATION CONSISTS OF:
• Feed Auger System• Incline Auger• Mix Auger• Water System• Addmix system• High Pressure Wash System• Electric Control System
FEED AUGER SYSTEM
The Feed Auger System consists of feed hopper, vibrators and metering auger.The Feed Auger System is designed to hold one yard (two yards with extensions) of pre-weighed dry shotcrete materials. The Metering Auger feeds material from the flooded hopper to the Incline Auger at a controlled rate using the Variable Frequency Drive (VFD). The Metering Auger is activated by a start/stop switch located on the Control Panel.
INCLINE AUGER
The Incline Auger feeds material from the Feed Auger system to the Incline Auger at a fixed speed. The Incline Auger is activated by a start/stop switch located on the Control Panel.
MIX AUGER
The Mix Auger serves two purposes: to convey material from the Incline Auger to the transport vehicle, and to add mix water and Addmix chemical into the material to create a full wet mix of material.
The Mix Auger is activated by a switch on the Control Panel.
www.multicretesystems.com
MSI PORTABLE MIXING STATIONSALES DATA SHEET
WATER SYSTEM
The Water System is comprised of the following components:
• Water Feed Tank: A holding tank to supply water to the system.• Supply Pump: Manual/Auto control. When in auto, booster pump runs to supply water from the Water Feed Tank when the Batch Controller requests supply.
Manual control has no interlocking and should primarily be used with operation of the High Pressure Wash System.• Mag Flow Meter: Monitors flow rate, sends out pulse signal to the Water Batch Controller and displays flow rate.• Electric Actuated Ball Valve and Gate Valve: controls water flow and is activated by the Water Batch Controller.• Water Batch Controller: Monitors water volume used (Liters). Controls Water Valve accordingly.• Water Header: Provides water distribution to Mix Auger.
ADDMIX SYSTEM
The Addmix System consists of a peristaltic tube pump, a Mag flow meter with indicator.
HIGH PRESSURE WASH SYSTEM (OPTIONAL)
The High Pressure Wash System is a standalone unit that provides up to 2500 psi for Mix Auger and other required cleanouts.
www.multicretesystems.com
MSI PORTABLE MIXING STATIONSALES DATA SHEET
ELECTRIC CONTROL SYSTEM
The Portable Mix Station Electrical Design consists of:
• Main Fused Lockable Disconnect Switch- Provides a lockable disconnect means with viewing window for stab operation verification.- Fused for short circuit protection.
• 600 / 120V Transformer- 3 Kilo Volt Ampere (KVA) Transformer for system 120V control power
• Main Control Panel- Mix Auger, Incline Auger and Metering Auger Start/Stop- Hopper Vibrators momentary Start button- Water Valve, Addmix and Booster Pump Hand/Off/Auto- E-Stop for emergency situations. Not intended to be used as a safety device for maintenance, cleanup, etc.
• Water Batch Control Panel- Monitors flow rate using pulse inputs- Display batch total liters (gallons optional)
When all switches are in Auto:- Controls Water Valve operation- Controls Addmix operation- Controls Booster Pump operation
• Mix Auger Remote Lockable Disconnect- Provides a lockable disconnect means for safe isolation of Mix Auger.
• Mix Auger Remote Start/Stop Control with system E-Stop- Remote Start/Stop on catwalk, primarily used for clean out purposes. E-Stop is an entire system E-Stop for emergency situations and is not intended to be used as a safety device for maintenance, cleanup, etc.
• Addmix Controller- Displays total Addmix volume or flow.
• Metering Auger VFD- Provides speed control for the Metering Auger.
Multicrete specializes in the designing and manufacturing of Underground Hybrid-Wet® Bulk Shotcrete Storage, Loading and Mix-plant solutions tailored to compliment your existing mine infrastructure. Utilizing bulk bags or bulk cassettes, bulk dry shotcrete can be transported underground from surface to a Portable Load Station. Material can then be called upon on demand 24/7, and loaded dry directly into a Bulk Carrier/Application unit such as the HW10H Hybrid-Wet® Shotcrete Carrier. An efficient means of moving bulk dry material with minimal dust. Once loaded, the unit can then transport the product to the shoot site, reducing time and travel.
PURPOSE
The underground Hybrid-Wet® Bulk Shotcrete Loading System allows the transference of bulk dry material from bag or cassette to carrier with the added benefit of being completely portable.
Unload Feed HopperFor Bulk Dry Material
Compatible WithDry Bulk Bag, Bulk Bag
Cassette, or Bulk Cassette
• Completely portable for flexibility• Feed hopper can be used with bulk bags or cassettes• Discharge auger swings against drift wall when not in
use, allowing clearance for rock haulers, etc.
SPECIFICATIONS
• All auger flighting 3/8" thick abrasion resistant steel• All augers 1.4 service factor or better• Unload bag or cassette in 2-3 minutes• CSA approved electrical components• Each unit can be custom fabricated to meet customers'
needs• Station is fastened to drift wall and back, can be
relocated as needed
Winnipeg, MBPh: 204-262-5900
Red Lake, ONPh: 807-735-3011
Thompson, MBPh: 204-677-5977
Snow Lake, MBPh: 204-358-7992
Flin Flon, MBPh: 204-687-6533
Saskatoon, SKPh: 306-651-2727
Edmonton, ABPh: 780-960-6692
www.multicretesystems.com
MULTICRETE BULK SHOTCRETE MIX STATION TECHNICAL DATA SHEET
Multicrete specializes in the designing and manufacturing of Underground Hybrid-Wet® Bulk Shotcrete Storage and Mix-plant solutions tailored to compliment your existing mine infrastructure. Utilizing your existing slick-line, or by using bulk bags, bulk cassettes, bulk dry shotcrete can be transported underground from surface to a bulk storage silo. Material is then available "on demand 24/7", and either loaded dry directly into a Bulk Carrier/Application unit such as the HW10H Hybrid-Wet® Shotcrete Carrier, or it can be mixed into a wet state and loaded into a transmixer. Both units can then transport the product to the shoot site, reducing tram time.
PURPOSE
The underground Hybrid-Wet® Bulk Shotcrete Storage and Mix-plant eliminates the need to produce "live shotcrete" product on surface to be sent down a slick-line, (with all of the inherent dangers of plugging it). Instead, dry shotcrete utilizes the same slick -line, where it can then be bulk stored indefinitely, "on call" for production into a live load anytime!
Bulk Storage & Mixing For Bulk Dry Material
• Complete automation of batch cycle available• Infeed adaptable to slick-line, bulk bags or cassettes• Discharge auger is "plumbed" with water nozzles
to provide wet mix shotcrete
SPECIFICATIONS • All auger flighting 3/8" thick abrasion resistant steel• All augers 1.4 service factor or better• Sandblasted and Powder coated• CSA approved electrical components• Each unit can be custom fabricated to meet customers'
needs• Typically 18-30 tonne storage capacity, but can scaleto whatever allowable site measurements dictate • Can store and load dry shotcrete, or can be modified to
store dry and load a mixed Hybrid-Wet® product
Compatible With Hybrid-Wet® Shotcrete Carrier or Transmixer
Multicrete specializes in the designing and manufacturing of Underground Hybrid-Wet® Bulk Shotcrete Storage, Loading and Mix-plant solutions tailored to compliment your existing mine infrastructure. We also offer a wide range of Support Equipment such as Multicrete's Portable accelerator mixing station which reconstitutes a powdered accelerator such as SIKA® P1AF powerdered concentrate into a liquid state which can then be used "as needed" by any shotcrete application unit. It's simplistic design consists of a Feed Hopper & Auger, Mixing tank, and storage units.
PURPOSE
When the need for liquid shotcrete accelerator for your shotcrete program is high but the circumstances dictate that supply must come in a dry format, then this is your solution. Production on-site, on demand storing as little or as much as you need.
Liquid Shotcrete Accelerator Mixing Station and Storage
Multicrete specializes in the designing and manufacturing of Underground Hybrid-Wet® Bulk Shotcrete Storage and Mix-plant solutions tailored to compliment your existing mine infrastructure. Utilizing your existing slick-line, or by using bulk bags, bulk cassettes, bulk dry shotcrete can be transported underground from surface to a bulk storage silo. Material is then be available "on demand 24/7", and either loaded dry directly into a Bulk Carrier/Application unit such as the HW10H Hybrid-Wet® Shotcrete Carrier, or it can be mixed into a wet state and loaded into a transmixer. Both units can then transport the product to the shoot site, reducing tram time.
PURPOSE
The underground Hybrid-Wet® Bulk Shotcrete Storage and Mix-plant eliminates the need to produce "live shotcrete" product on surface to be sent down a slick-line, (with all of the inherent dangers of plugging it). Instead, dry shotcrete utilizes the same slick -line, where it can then be bulk stored indefinitely, "on call" for production into a live load anytime!
• Skid mounted for maximum flexibility• Complete automation of batch cycle available• Infeed adaptable to slick-line, bulk bags or cassettes• Discharge auger can be "plumbed" with water nozzles
to provide wet mix shotcrete• 15 hp dust collection system
SPECIFICATIONS
• All auger flighting 3/8" thick abrasion resistant steel• All augers 1.4 service factor or better• Sandblasted and Powder coated• CSA approved electrical components• Each unit can be custom fabricated to meet customers'
needs• Typically 18-30 tonne storage capacity, but can scale
to whatever allowable site measurements dictate• Can store and load dry shotcrete, or can store dry
BATCH PLANTS Fabrication of Shotcrete and/or Concrete Plants
www.multicretesystems.com
Multicrete continues to construct production facilities across Canada to service our many custom-ers.
In-house design/build specialists, engineers, plant superintendents, quality control, maintenance and support personnel contribute to the set-up and implementation of successful shotcrete and con-crete production facilities. At our main production facilities we can custom blend to meet project-specific requirements. Efficiency allows for over 150 metric tonnes of dry-mix pre-blended material to be produced in an 8 - hour shift.
