Design engineering canvas report on pneumatic car17

GUJRAT TECHNOLOGICAL UNIVERCITYChandkheda, Ahmedabad Affiliated

A Project report onPneumatic carUnder subject of DESIGN ENGINEERING I B. E. II, Semester III (Mechanical Branch)Submitted by Group:Sr.noName of student Enrollment no.

1Puraswani Vishal A.150603119012

2Suthar Rushi S.150603119017

3Pathan Shahbazkhan S.150603119010

4Parmar Ranjitsinh M.150603119005

Guide BY: Prof. D.K. Patel

Government Engineering College, Godhra.Academic year: 2015-16

Government Engineering College, Godhra.Certificate This is certify to Pathan Shahbazkhan S. having Enrollment no. 150603119010 student of B.E. Mechanical successfully submitted detail project report of Pneumatic car during the academic year 2015-16. This project work has been carried out by them in group (04 person) under guidance of prof.D.K.Patel.

Date of Submission:

Faculty guide H.O.D. Mechanical(Prof.D.K.Patel) (Prof.A.K.Patel)

ContentSR.NO. TOPIC PAGE NO.

1. Title.012. Certificate........023. Table of content...034. List of images..045. Introduction056. Empathy mapping canvas...067. Ideation canvas108. Product development canvas...13

List of images:SR.NO. IMAGE NAME PAGE NO.

2. Empathy mapping canvas 2.1 User and stakeholders06 2.2 Activities.07 2.3 Story boarding....08 2.4 Full empathy mapping canvas093. Ideation canvas 3.1 People10 3.2 Activities10 3.3 Situation Location and contexts....11 3.4 Props/Possible solution..124. Product development canvas 4.1 People.13 4.2 Purpose...13 4.3 Product function.....14 4.4 Product features..14 4.5 Component.15 4.6 Entire product development canvas....16

1. IntroductionAbout our Group: In our group, we are 4 members named Pathan Shahbazkhan (150603119010), Purshwani Vishal (150603119012), Rushi Suthar (150603119017), and Parmar Ranjitsinh (150603119005).Our Faculty Guide is Prof. D.K.Patel.

About Design Thinking:

Design Thinking is a methodology used by designers to solve complex problems, and find desirable solutions for clients. Design Thinking draws upon logic, imagination, intuition, and systemic reasoning, to explore possibilities of what could be, and to create desired outcomes that benefit the end user (the customer). A design mindset is not problem-focused, its solution focused, and action oriented. It involves both analysis and imagination. Design thinking is a process which includes the "building up" of ideas, with few, or no, limits on breadth during a "brainstorming" phase.

2. Empathy MappingDomain: Our domain area is Automobiles. In todays world personal and public transport is the most important thing. Rapid transport is essential with environment friendly. But, the conventional vehicles which usage nowadays it powered by petroleum fuels and exhaust smoke of this fuel is harmful to environment. The Purpose Of this project is to provide ecofriendly environment and good health. To fulfill this purpose we have thought to invent the Pneumatic Car. In the pneumatic Car, we think to use of compressed air to drive vehicle and elimination of fuel.

Users and StakeholdersImage 2.1 User and stakeholders

The people who are involved in these activities can be civilians, travelers, racers, researchers etc. the users are the owner of vehicle who can be student, faculty, doctor, businessmen, domestic driver, employee, civilians, professional racer etc. Stakeholders are the environment saving NGOs, Researchers, Engineers Automobile industries, pollution control organization etc.

Activity:Activities which are associated with this product is described below:

Image2.2 activities Students going to School by cycling Some people parking their cars Passengers waiting for the bus Traffic officer manage the traffic Mechanic repair a car Vehicles owners are in Queue on the patrol pump Rickshaw drivers finding passengers Taxi drop the passengers People randomly walked on roads Some people ride a bike Ambulance going to the Hospital

We provided two sad and one happy emotional stories highlighting the difficulties being faced.

Image 2.3 Story boarding

Full Empathy mapping canvas

Image 2.4 full empathy mapping canvas

Conclusion: Automobiles are widely used in public and personal transportation also in goods transportation. There are all type of people like students, teachers, employee, domestic drivers, civilians, villagers, racer etc. Are relate to automobiles .they are professionally or emotionally use vehicles. In conventional vehicle there two main problem one is unavalibity of fuel in midways in highways, rural areas and second is air pollution are caused by the vehicles.

3. Ideation canvas Second task was to create THE IDEATION CANVAS. We described activities of people and situation or location where they are facing problems. This canvas is very helpful to reach near our goal. This canvas helped us to know what the areas which need focus are.People: The people involved in activities are travelers, employees, students, drivers etc.

Image 3.1 peopleActivities: Which are associated with this product is mentioned below:

Image3.2 activities Situation Location and contexts: We attempted to identify different locations that are involved in performing theabove activities, situations that are applied to perform certain activities and contextof importance that was relevant to activities. We came up with the followingImage3.3 Situation Location and contexts The problems we find out after analysis of ideation canvas are mentioned below: After the fuel is over car is not run Unavailability of fuel in rural area, mid highways in short distance. The smoke of car is caused air pollution No other system in car to drive for some short distance without fuel Car is very costly Maintenance and refilling fuel is costly

Props/Possible solution:

Image 3.4 Props/Possible solution The possible solution for the problem figured out are should be: Use renewable fuel Air powered car Solar / electric powered vehicle Patrolling on the highways Paddle generator electric vehicle Eco friendly vehicle Use of public transport

4. Product development canvas

People: Thepeopletowhomourproductmaybeuseful

Image4.1 people Civilians Travelers Drivers Racers etc.Purpose: Image 4.2 purposeTo make a vehicle which may have: Ecofriendly Pollution less Renewable energy source Easy availability of working mediaProductfunction: Thepurposeofourprojectistodesignaproduct that should be used for personal or public transportation, domestic driving and Material handling in the industry etc.. Image 4.3 Product functionProductfeatures: Our designed product may have the following features

Image 4.4 Product features Use of natural and renewable fuel, Air. Easy to refilling air tank Elimination of fuel Pollution free vehicle Combustion less stokes Light weight Low manufacturing cost Easy to maintenance Eco friendly vehicle

Components:

Image 4.5 Component Air tank engine Air motor Chases Valve Piping Gear arrangementImage of entire product development canvas:

Image 4.6 entire product development canvasAbout Product Pneumatic Vehicle: Pneumatic vehicle is powered by an air engine, using compressed air, which is stored in a tank. Instead of mixing fuel with air and burning it in the engine to drive pistons with hot expanding gases, compressed-air vehicles use the expansion of compressed air to drive their pistons. TheUse of compressed air for storing energy is a method that is not only efficient and clean, but also economical. Refilling of air very easy and can refilling at any places. Reduces the cost of vehicle production by about 20% as no need to build a cooling system, fuel tank, Ignition Systems or silencers. Smooth working will lead to less wear & tear, so lesser maintenance cost. So, this product fulfill the demands of fuel free, economic and pollution free car.GOVERNMENT ENGINEERING COLLEGE, GODHRA.